UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/imx/clk-imx7ulp.c

250 lines
14 KiB
C
Raw Normal View History

clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 21:02:08 +08:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017~2018 NXP
*
* Author: Dong Aisheng <aisheng.dong@nxp.com>
*
*/
#include <dt-bindings/clock/imx7ulp-clock.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "clk.h"
static const char * const pll_pre_sels[] = { "sosc", "firc", };
static const char * const spll_pfd_sels[] = { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
static const char * const spll_sels[] = { "spll", "spll_pfd_sel", };
static const char * const apll_pfd_sels[] = { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
static const char * const apll_sels[] = { "apll", "apll_pfd_sel", };
static const char * const scs_sels[] = { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "upll", };
static const char * const ddr_sels[] = { "apll_pfd_sel", "upll", };
static const char * const nic_sels[] = { "firc", "ddr_clk", };
static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 18:03:34 +08:00
static const char * const arm_sels[] = { "divcore", "dummy", "dummy", "hsrun_divcore", };
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 21:02:08 +08:00
/* used by sosc/sirc/firc/ddr/spll/apll dividers */
static const struct clk_div_table ulp_div_table[] = {
{ .val = 1, .div = 1, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 4, },
{ .val = 4, .div = 8, },
{ .val = 5, .div = 16, },
{ .val = 6, .div = 32, },
{ .val = 7, .div = 64, },
};
static void __init imx7ulp_clk_scg1_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
struct clk_hw **clks;
void __iomem *base;
clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
IMX7ULP_CLK_SCG1_END, GFP_KERNEL);
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_SCG1_END;
clks = clk_data->hws;
clks[IMX7ULP_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
clks[IMX7ULP_CLK_ROSC] = imx_obtain_fixed_clk_hw(np, "rosc");
clks[IMX7ULP_CLK_SOSC] = imx_obtain_fixed_clk_hw(np, "sosc");
clks[IMX7ULP_CLK_SIRC] = imx_obtain_fixed_clk_hw(np, "sirc");
clks[IMX7ULP_CLK_FIRC] = imx_obtain_fixed_clk_hw(np, "firc");
clks[IMX7ULP_CLK_MIPI_PLL] = imx_obtain_fixed_clk_hw(np, "mpll");
clks[IMX7ULP_CLK_UPLL] = imx_obtain_fixed_clk_hw(np, "upll");
/* SCG1 */
base = of_iomap(np, 0);
WARN_ON(!base);
/* NOTE: xPLL config can't be changed when xPLL is enabled */
clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
clks[IMX7ULP_CLK_SPLL_PRE_SEL] = imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
/* name parent_name reg shift width flags */
clks[IMX7ULP_CLK_APLL_PRE_DIV] = imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508, 8, 3, CLK_SET_RATE_GATE);
clks[IMX7ULP_CLK_SPLL_PRE_DIV] = imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608, 8, 3, CLK_SET_RATE_GATE);
/* name parent_name base */
clks[IMX7ULP_CLK_APLL] = imx_clk_pllv4("apll", "apll_pre_div", base + 0x500);
clks[IMX7ULP_CLK_SPLL] = imx_clk_pllv4("spll", "spll_pre_div", base + 0x600);
/* APLL PFDs */
clks[IMX7ULP_CLK_APLL_PFD0] = imx_clk_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
clks[IMX7ULP_CLK_APLL_PFD1] = imx_clk_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
clks[IMX7ULP_CLK_APLL_PFD2] = imx_clk_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
clks[IMX7ULP_CLK_APLL_PFD3] = imx_clk_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
/* SPLL PFDs */
clks[IMX7ULP_CLK_SPLL_PFD0] = imx_clk_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
clks[IMX7ULP_CLK_SPLL_PFD1] = imx_clk_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
clks[IMX7ULP_CLK_SPLL_PFD2] = imx_clk_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
clks[IMX7ULP_CLK_SPLL_PFD3] = imx_clk_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
/* PLL Mux */
clks[IMX7ULP_CLK_APLL_PFD_SEL] = imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
clks[IMX7ULP_CLK_SPLL_PFD_SEL] = imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
clks[IMX7ULP_CLK_APLL_SEL] = imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
clks[IMX7ULP_CLK_SPLL_SEL] = imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
clks[IMX7ULP_CLK_SPLL_BUS_CLK] = imx_clk_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
/* scs/ddr/nic select different clock source requires that clock to be enabled first */
clks[IMX7ULP_CLK_SYS_SEL] = imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 18:03:34 +08:00
clks[IMX7ULP_CLK_HSRUN_SYS_SEL] = imx_clk_hw_mux2("hsrun_scs_sel", base + 0x1c, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 21:02:08 +08:00
clks[IMX7ULP_CLK_NIC_SEL] = imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
clks[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 18:03:34 +08:00
clks[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
clks[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
clk: imx: add imx7ulp clk driver i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks The clocking scheme provides clear separation between M4 domain and A7 domain. Except for a few clock sources shared between two domains, such as the System Oscillator clock, the Slow IRC (SIRC), and and the Fast IRC clock (FIRCLK), clock sources and clock management are separated and contained within each domain. M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. This driver only adds clock support in A7 domain. Note that most clocks required to be operated when gated, e.g. pll, pfd, pcc. And more special cases that scs/ddr/nic mux selecting different clock source requires that clock to be enabled first, then we need set CLK_OPS_PARENT_ENABLE flag for them properly. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14 21:02:08 +08:00
clks[IMX7ULP_CLK_DDR_DIV] = imx_clk_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
0, ulp_div_table, &imx_ccm_lock);
clks[IMX7ULP_CLK_NIC0_DIV] = imx_clk_hw_divider_flags("nic0_clk", "nic_sel", base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
clks[IMX7ULP_CLK_NIC1_DIV] = imx_clk_hw_divider_flags("nic1_clk", "nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
clks[IMX7ULP_CLK_NIC1_BUS_DIV] = imx_clk_hw_divider_flags("nic1_bus_clk", "nic1_clk", base + 0x40, 4, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
clks[IMX7ULP_CLK_GPU_DIV] = imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
clks[IMX7ULP_CLK_SOSC_BUS_CLK] = imx_clk_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
clks[IMX7ULP_CLK_FIRC_BUS_CLK] = imx_clk_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
imx_check_clk_hws(clks, clk_data->num);
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
struct clk_hw **clks;
void __iomem *base;
clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
IMX7ULP_CLK_PCC2_END, GFP_KERNEL);
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_PCC2_END;
clks = clk_data->hws;
/* PCC2 */
base = of_iomap(np, 0);
WARN_ON(!base);
clks[IMX7ULP_CLK_DMA1] = imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
clks[IMX7ULP_CLK_RGPIO2P1] = imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
clks[IMX7ULP_CLK_DMA_MUX1] = imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
clks[IMX7ULP_CLK_SNVS] = imx_clk_hw_gate("snvs", "nic1_bus_clk", base + 0x8c, 30);
clks[IMX7ULP_CLK_CAAM] = imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
clks[IMX7ULP_CLK_LPTPM4] = imx7ulp_clk_composite("lptpm4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
clks[IMX7ULP_CLK_LPTPM5] = imx7ulp_clk_composite("lptpm5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
clks[IMX7ULP_CLK_LPIT1] = imx7ulp_clk_composite("lpit1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
clks[IMX7ULP_CLK_LPSPI2] = imx7ulp_clk_composite("lpspi2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
clks[IMX7ULP_CLK_LPSPI3] = imx7ulp_clk_composite("lpspi3", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
clks[IMX7ULP_CLK_LPI2C4] = imx7ulp_clk_composite("lpi2c4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
clks[IMX7ULP_CLK_LPI2C5] = imx7ulp_clk_composite("lpi2c5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
clks[IMX7ULP_CLK_LPUART4] = imx7ulp_clk_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
clks[IMX7ULP_CLK_LPUART5] = imx7ulp_clk_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
clks[IMX7ULP_CLK_FLEXIO1] = imx7ulp_clk_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
clks[IMX7ULP_CLK_USB0] = imx7ulp_clk_composite("usb0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xcc);
clks[IMX7ULP_CLK_USB1] = imx7ulp_clk_composite("usb1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xd0);
clks[IMX7ULP_CLK_USB_PHY] = imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
clks[IMX7ULP_CLK_USDHC0] = imx7ulp_clk_composite("usdhc0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xdc);
clks[IMX7ULP_CLK_USDHC1] = imx7ulp_clk_composite("usdhc1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xe0);
clks[IMX7ULP_CLK_WDG1] = imx7ulp_clk_composite("wdg1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xf4);
clks[IMX7ULP_CLK_WDG2] = imx7ulp_clk_composite("sdg2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0x10c);
imx_check_clk_hws(clks, clk_data->num);
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
struct clk_hw **clks;
void __iomem *base;
clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
IMX7ULP_CLK_PCC3_END, GFP_KERNEL);
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_PCC3_END;
clks = clk_data->hws;
/* PCC3 */
base = of_iomap(np, 0);
WARN_ON(!base);
clks[IMX7ULP_CLK_LPTPM6] = imx7ulp_clk_composite("lptpm6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
clks[IMX7ULP_CLK_LPTPM7] = imx7ulp_clk_composite("lptpm7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
clks[IMX7ULP_CLK_MMDC] = clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
base + 0xac, 30, 0, &imx_ccm_lock);
clks[IMX7ULP_CLK_LPI2C6] = imx7ulp_clk_composite("lpi2c6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
clks[IMX7ULP_CLK_LPI2C7] = imx7ulp_clk_composite("lpi2c7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
clks[IMX7ULP_CLK_LPUART6] = imx7ulp_clk_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
clks[IMX7ULP_CLK_LPUART7] = imx7ulp_clk_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
clks[IMX7ULP_CLK_DSI] = imx7ulp_clk_composite("dsi", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xa4);
clks[IMX7ULP_CLK_LCDIF] = imx7ulp_clk_composite("lcdif", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xa8);
clks[IMX7ULP_CLK_VIU] = imx_clk_hw_gate("viu", "nic1_clk", base + 0xa0, 30);
clks[IMX7ULP_CLK_PCTLC] = imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
clks[IMX7ULP_CLK_PCTLD] = imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
clks[IMX7ULP_CLK_PCTLE] = imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
clks[IMX7ULP_CLK_PCTLF] = imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
clks[IMX7ULP_CLK_GPU3D] = imx7ulp_clk_composite("gpu3d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
clks[IMX7ULP_CLK_GPU2D] = imx7ulp_clk_composite("gpu2d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
imx_check_clk_hws(clks, clk_data->num);
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
clk: imx: imx7ulp: add arm hsrun mode clocks support i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07 18:03:34 +08:00
static void __init imx7ulp_clk_smc1_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
struct clk_hw **clks;
void __iomem *base;
clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
IMX7ULP_CLK_SMC1_END, GFP_KERNEL);
if (!clk_data)
return;
clk_data->num = IMX7ULP_CLK_SMC1_END;
clks = clk_data->hws;
/* SMC1 */
base = of_iomap(np, 0);
WARN_ON(!base);
clks[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
imx_check_clk_hws(clks, clk_data->num);
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
}
CLK_OF_DECLARE(imx7ulp_clk_smc1, "fsl,imx7ulp-smc1", imx7ulp_clk_smc1_init);