UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/if_rmnet.h

73 lines
2.0 KiB
C
Raw Normal View History

net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
/* SPDX-License-Identifier: GPL-2.0-only
net: ethernet: rmnet: Support for ingress MAPv5 checksum offload Adding support for processing of MAPv5 downlink packets. It involves parsing the Mapv5 packet and checking the csum header to know whether the hardware has validated the checksum and is valid or not. Based on the checksum valid bit the corresponding stats are incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY or left as CHEKSUM_NONE to let network stack revalidate the checksum and update the respective snmp stats. Current MAPV1 header has been modified, the reserved field in the Mapv1 header is now used for next header indication. Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 03:28:35 +08:00
* Copyright (c) 2013-2019, 2021 The Linux Foundation. All rights reserved.
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
*/
#ifndef _LINUX_IF_RMNET_H_
#define _LINUX_IF_RMNET_H_
struct rmnet_map_header {
net: qualcomm: rmnet: use masks instead of C bit-fields The actual layout of bits defined in C bit-fields (e.g. int foo : 3) is implementation-defined. Structures defined in <linux/if_rmnet.h> address this by specifying all bit-fields twice, to cover two possible layouts. I think this pattern is repetitive and noisy, and I find the whole notion of compiler "bitfield endianness" to be non-intuitive. Stop using C bit-fields for the command/data flag and the pad length fields in the rmnet_map structure, and define a single-byte flags field instead. Define a mask for the single-bit "command" flag, and another mask for the encoded pad length. The content of both fields can be accessed using a simple bitwise AND operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:49 +08:00
u8 flags; /* MAP_CMD_FLAG, MAP_PAD_LEN_MASK */
u8 mux_id;
__be16 pkt_len; /* Length of packet, including pad */
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
} __aligned(1);
net: qualcomm: rmnet: use masks instead of C bit-fields The actual layout of bits defined in C bit-fields (e.g. int foo : 3) is implementation-defined. Structures defined in <linux/if_rmnet.h> address this by specifying all bit-fields twice, to cover two possible layouts. I think this pattern is repetitive and noisy, and I find the whole notion of compiler "bitfield endianness" to be non-intuitive. Stop using C bit-fields for the command/data flag and the pad length fields in the rmnet_map structure, and define a single-byte flags field instead. Define a mask for the single-bit "command" flag, and another mask for the encoded pad length. The content of both fields can be accessed using a simple bitwise AND operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:49 +08:00
/* rmnet_map_header flags field:
net: ethernet: rmnet: Support for ingress MAPv5 checksum offload Adding support for processing of MAPv5 downlink packets. It involves parsing the Mapv5 packet and checking the csum header to know whether the hardware has validated the checksum and is valid or not. Based on the checksum valid bit the corresponding stats are incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY or left as CHEKSUM_NONE to let network stack revalidate the checksum and update the respective snmp stats. Current MAPV1 header has been modified, the reserved field in the Mapv1 header is now used for next header indication. Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 03:28:35 +08:00
* PAD_LEN: number of pad bytes following packet data
* CMD: 1 = packet contains a MAP command; 0 = packet contains data
* NEXT_HEADER: 1 = packet contains V5 CSUM header 0 = no V5 CSUM header
net: qualcomm: rmnet: use masks instead of C bit-fields The actual layout of bits defined in C bit-fields (e.g. int foo : 3) is implementation-defined. Structures defined in <linux/if_rmnet.h> address this by specifying all bit-fields twice, to cover two possible layouts. I think this pattern is repetitive and noisy, and I find the whole notion of compiler "bitfield endianness" to be non-intuitive. Stop using C bit-fields for the command/data flag and the pad length fields in the rmnet_map structure, and define a single-byte flags field instead. Define a mask for the single-bit "command" flag, and another mask for the encoded pad length. The content of both fields can be accessed using a simple bitwise AND operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:49 +08:00
*/
#define MAP_PAD_LEN_MASK GENMASK(5, 0)
net: ethernet: rmnet: Support for ingress MAPv5 checksum offload Adding support for processing of MAPv5 downlink packets. It involves parsing the Mapv5 packet and checking the csum header to know whether the hardware has validated the checksum and is valid or not. Based on the checksum valid bit the corresponding stats are incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY or left as CHEKSUM_NONE to let network stack revalidate the checksum and update the respective snmp stats. Current MAPV1 header has been modified, the reserved field in the Mapv1 header is now used for next header indication. Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 03:28:35 +08:00
#define MAP_NEXT_HEADER_FLAG BIT(6)
net: qualcomm: rmnet: use masks instead of C bit-fields The actual layout of bits defined in C bit-fields (e.g. int foo : 3) is implementation-defined. Structures defined in <linux/if_rmnet.h> address this by specifying all bit-fields twice, to cover two possible layouts. I think this pattern is repetitive and noisy, and I find the whole notion of compiler "bitfield endianness" to be non-intuitive. Stop using C bit-fields for the command/data flag and the pad length fields in the rmnet_map structure, and define a single-byte flags field instead. Define a mask for the single-bit "command" flag, and another mask for the encoded pad length. The content of both fields can be accessed using a simple bitwise AND operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:49 +08:00
#define MAP_CMD_FLAG BIT(7)
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
struct rmnet_map_dl_csum_trailer {
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum trailer Replace the use of C bit-fields in the rmnet_map_dl_csum_trailer structure with a single one-byte field, using constant field masks to encode or get at embedded values. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:50 +08:00
u8 reserved1;
u8 flags; /* MAP_CSUM_DL_VALID_FLAG */
net: qualcomm: rmnet: mark trailer field endianness The fields in the checksum trailer structure used for QMAP protocol RX packets are all big-endian format, so define them that way. It turns out these fields are never actually used by the RMNet code. The start offset is always assumed to be zero, and the length is taken from the other packet headers. So making these fields explicitly big endian has no effect on the behavior of the code. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:46 +08:00
__be16 csum_start_offset;
__be16 csum_length;
net: qualcomm: rmnet: trailer value is a checksum The csum_value field in the rmnet_map_dl_csum_trailer structure is a "real" Internet checksum. It is a 16 bit value, in big endian format, which represents an inverted ones' complement sum over pairs of bytes. Make that clear by changing its type to __sum16. This makes a typecast in rmnet_map_ipv4_dl_csum_trailer() and another in rmnet_map_ipv6_dl_csum_trailer() unnecessary. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12 22:37:34 +08:00
__sum16 csum_value;
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
} __aligned(1);
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum trailer Replace the use of C bit-fields in the rmnet_map_dl_csum_trailer structure with a single one-byte field, using constant field masks to encode or get at embedded values. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:50 +08:00
/* rmnet_map_dl_csum_trailer flags field:
* VALID: 1 = checksum and length valid; 0 = ignore them
*/
#define MAP_CSUM_DL_VALID_FLAG BIT(0)
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
struct rmnet_map_ul_csum_header {
__be16 csum_start_offset;
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum header Replace the use of C bit-fields in the rmnet_map_ul_csum_header structure with a single two-byte (big endian) structure member, and use masks to encode or get values within it. The content of these fields can be accessed using simple bitwise AND and OR operations on the (host byte order) value of the new structure member. Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field values in host byte order, then forcibly fix their byte order using a combination of byte swap operations and types. Instead, just compute the value that needs to go into the new structure member and save it with a simple byte-order conversion. Make similar simplifications in rmnet_map_ipv6_ul_csum_header(). Finally, in rmnet_map_checksum_uplink_packet() a set of assignments zeroes every field in the upload checksum header. Replace that with a single memset() operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:51 +08:00
__be16 csum_info; /* MAP_CSUM_UL_* */
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
} __aligned(1);
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum header Replace the use of C bit-fields in the rmnet_map_ul_csum_header structure with a single two-byte (big endian) structure member, and use masks to encode or get values within it. The content of these fields can be accessed using simple bitwise AND and OR operations on the (host byte order) value of the new structure member. Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field values in host byte order, then forcibly fix their byte order using a combination of byte swap operations and types. Instead, just compute the value that needs to go into the new structure member and save it with a simple byte-order conversion. Make similar simplifications in rmnet_map_ipv6_ul_csum_header(). Finally, in rmnet_map_checksum_uplink_packet() a set of assignments zeroes every field in the upload checksum header. Replace that with a single memset() operation. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 05:51:51 +08:00
/* csum_info field:
* OFFSET: where (offset in bytes) to insert computed checksum
* UDP: 1 = UDP checksum (zero checkum means no checksum)
* ENABLED: 1 = checksum computation requested
*/
#define MAP_CSUM_UL_OFFSET_MASK GENMASK(13, 0)
#define MAP_CSUM_UL_UDP_FLAG BIT(14)
#define MAP_CSUM_UL_ENABLED_FLAG BIT(15)
net: ethernet: rmnet: Support for ingress MAPv5 checksum offload Adding support for processing of MAPv5 downlink packets. It involves parsing the Mapv5 packet and checking the csum header to know whether the hardware has validated the checksum and is valid or not. Based on the checksum valid bit the corresponding stats are incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY or left as CHEKSUM_NONE to let network stack revalidate the checksum and update the respective snmp stats. Current MAPV1 header has been modified, the reserved field in the Mapv1 header is now used for next header indication. Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 03:28:35 +08:00
/* MAP CSUM headers */
struct rmnet_map_v5_csum_header {
u8 header_info;
u8 csum_info;
__be16 reserved;
} __aligned(1);
/* v5 header_info field
* NEXT_HEADER: represents whether there is any next header
* HEADER_TYPE: represents the type of this header
*
* csum_info field
* CSUM_VALID_OR_REQ:
* 1 = for UL, checksum computation is requested.
* 1 = for DL, validated the checksum and has found it valid
*/
#define MAPV5_HDRINFO_NXT_HDR_FLAG BIT(0)
#define MAPV5_HDRINFO_HDR_TYPE_FMASK GENMASK(7, 1)
#define MAPV5_CSUMINFO_VALID_FLAG BIT(7)
#define RMNET_MAP_HEADER_TYPE_CSUM_OFFLOAD 2
net: qualcomm: rmnet: Move common struct definitions to include Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23 04:21:07 +08:00
#endif /* !(_LINUX_IF_RMNET_H_) */