OpenCloudOS-Kernel/arch/arm64/kernel/module.lds

SECTIONS {
	.plt (NOLOAD) : { BYTE(0) }
	.init.plt (NOLOAD) : { BYTE(0) }
}
arm64: add support for module PLTs This adds support for emitting PLTs at module load time for relative branches that are out of range. This is a prerequisite for KASLR, which may place the kernel and the modules anywhere in the vmalloc area, making it more likely that branch target offsets exceed the maximum range of +/- 128 MB. In this version, I removed the distinction between relocations against .init executable sections and ordinary executable sections. The reason is that it is hardly worth the trouble, given that .init.text usually does not contain that many far branches, and this version now only reserves PLT entry space for jump and call relocations against undefined symbols (since symbols defined in the same module can be assumed to be within +/- 128 MB) For example, the mac80211.ko module (which is fairly sizable at ~400 KB) built with -mcmodel=large gives the following relocation counts: relocs branches unique !local .text 3925 3347 518 219 .init.text 11 8 7 1 .exit.text 4 4 4 1 .text.unlikely 81 67 36 17 ('unique' means branches to unique type/symbol/addend combos, of which !local is the subset referring to undefined symbols) IOW, we are only emitting a single PLT entry for the .init sections, and we are better off just adding it to the core PLT section instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 2015-11-24 19:37:35 +08:00			`SECTIONS {`
			`.plt (NOLOAD) : { BYTE(0) }`
arm64: module: split core and init PLT sections The arm64 module PLT code allocates all PLT entries in a single core section, since the overhead of having a separate init PLT section is not justified by the small number of PLT entries usually required for init code. However, the core and init module regions are allocated independently, and there is a corner case where the core region may be allocated from the VMALLOC region if the dedicated module region is exhausted, but the init region, being much smaller, can still be allocated from the module region. This leads to relocation failures if the distance between those regions exceeds 128 MB. (In fact, this corner case is highly unlikely to occur on arm64, but the issue has been observed on ARM, whose module region is much smaller). So split the core and init PLT regions, and name the latter ".init.plt" so it gets allocated along with (and sufficiently close to) the .init sections that it serves. Also, given that init PLT entries may need to be emitted for branches that target the core module, modify the logic that disregards defined symbols to only disregard symbols that are defined in the same section as the relocated branch instruction. Since there may now be two PLT entries associated with each entry in the symbol table, we can no longer hijack the symbol::st_size fields to record the addresses of PLT entries as we emit them for zero-addend relocations. So instead, perform an explicit comparison to check for duplicate entries. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 2017-02-22 06:12:57 +08:00			`.init.plt (NOLOAD) : { BYTE(0) }`
arm64: add support for module PLTs This adds support for emitting PLTs at module load time for relative branches that are out of range. This is a prerequisite for KASLR, which may place the kernel and the modules anywhere in the vmalloc area, making it more likely that branch target offsets exceed the maximum range of +/- 128 MB. In this version, I removed the distinction between relocations against .init executable sections and ordinary executable sections. The reason is that it is hardly worth the trouble, given that .init.text usually does not contain that many far branches, and this version now only reserves PLT entry space for jump and call relocations against undefined symbols (since symbols defined in the same module can be assumed to be within +/- 128 MB) For example, the mac80211.ko module (which is fairly sizable at ~400 KB) built with -mcmodel=large gives the following relocation counts: relocs branches unique !local .text 3925 3347 518 219 .init.text 11 8 7 1 .exit.text 4 4 4 1 .text.unlikely 81 67 36 17 ('unique' means branches to unique type/symbol/addend combos, of which !local is the subset referring to undefined symbols) IOW, we are only emitting a single PLT entry for the .init sections, and we are better off just adding it to the core PLT section instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 2015-11-24 19:37:35 +08:00			`}`