OpenCloudOS-Kernel/drivers/pci/host/pcie-rcar.c

1207 lines
30 KiB
C
Raw Normal View History

/*
* PCIe driver for Renesas R-Car SoCs
* Copyright (C) 2014 Renesas Electronics Europe Ltd
*
* Based on:
* arch/sh/drivers/pci/pcie-sh7786.c
* arch/sh/drivers/pci/ops-sh7786.c
* Copyright (C) 2009 - 2011 Paul Mundt
*
* Author: Phil Edworthy <phil.edworthy@renesas.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#define PCIECAR 0x000010
#define PCIECCTLR 0x000018
#define CONFIG_SEND_ENABLE (1 << 31)
#define TYPE0 (0 << 8)
#define TYPE1 (1 << 8)
#define PCIECDR 0x000020
#define PCIEMSR 0x000028
#define PCIEINTXR 0x000400
#define PCIEMSITXR 0x000840
/* Transfer control */
#define PCIETCTLR 0x02000
#define CFINIT 1
#define PCIETSTR 0x02004
#define DATA_LINK_ACTIVE 1
#define PCIEERRFR 0x02020
#define UNSUPPORTED_REQUEST (1 << 4)
#define PCIEMSIFR 0x02044
#define PCIEMSIALR 0x02048
#define MSIFE 1
#define PCIEMSIAUR 0x0204c
#define PCIEMSIIER 0x02050
/* root port address */
#define PCIEPRAR(x) (0x02080 + ((x) * 0x4))
/* local address reg & mask */
#define PCIELAR(x) (0x02200 + ((x) * 0x20))
#define PCIELAMR(x) (0x02208 + ((x) * 0x20))
#define LAM_PREFETCH (1 << 3)
#define LAM_64BIT (1 << 2)
#define LAR_ENABLE (1 << 1)
/* PCIe address reg & mask */
#define PCIEPALR(x) (0x03400 + ((x) * 0x20))
#define PCIEPAUR(x) (0x03404 + ((x) * 0x20))
#define PCIEPAMR(x) (0x03408 + ((x) * 0x20))
#define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20))
#define PAR_ENABLE (1 << 31)
#define IO_SPACE (1 << 8)
/* Configuration */
#define PCICONF(x) (0x010000 + ((x) * 0x4))
#define PMCAP(x) (0x010040 + ((x) * 0x4))
#define EXPCAP(x) (0x010070 + ((x) * 0x4))
#define VCCAP(x) (0x010100 + ((x) * 0x4))
/* link layer */
#define IDSETR1 0x011004
#define TLCTLR 0x011048
#define MACSR 0x011054
#define SPCHGFIN (1 << 4)
#define SPCHGFAIL (1 << 6)
#define SPCHGSUC (1 << 7)
#define LINK_SPEED (0xf << 16)
#define LINK_SPEED_2_5GTS (1 << 16)
#define LINK_SPEED_5_0GTS (2 << 16)
#define MACCTLR 0x011058
#define SPEED_CHANGE (1 << 24)
#define SCRAMBLE_DISABLE (1 << 27)
#define MACS2R 0x011078
#define MACCGSPSETR 0x011084
#define SPCNGRSN (1 << 31)
/* R-Car H1 PHY */
#define H1_PCIEPHYADRR 0x04000c
#define WRITE_CMD (1 << 16)
#define PHY_ACK (1 << 24)
#define RATE_POS 12
#define LANE_POS 8
#define ADR_POS 0
#define H1_PCIEPHYDOUTR 0x040014
#define H1_PCIEPHYSR 0x040018
/* R-Car Gen2 PHY */
#define GEN2_PCIEPHYADDR 0x780
#define GEN2_PCIEPHYDATA 0x784
#define GEN2_PCIEPHYCTRL 0x78c
#define INT_PCI_MSI_NR 32
#define RCONF(x) (PCICONF(0)+(x))
#define RPMCAP(x) (PMCAP(0)+(x))
#define REXPCAP(x) (EXPCAP(0)+(x))
#define RVCCAP(x) (VCCAP(0)+(x))
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 24)
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19)
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16)
#define RCAR_PCI_MAX_RESOURCES 4
#define MAX_NR_INBOUND_MAPS 6
struct rcar_msi {
DECLARE_BITMAP(used, INT_PCI_MSI_NR);
struct irq_domain *domain;
struct msi_controller chip;
unsigned long pages;
struct mutex lock;
int irq1;
int irq2;
};
static inline struct rcar_msi *to_rcar_msi(struct msi_controller *chip)
{
return container_of(chip, struct rcar_msi, chip);
}
/* Structure representing the PCIe interface */
struct rcar_pcie {
struct device *dev;
void __iomem *base;
struct list_head resources;
int root_bus_nr;
struct clk *clk;
struct clk *bus_clk;
struct rcar_msi msi;
};
static void rcar_pci_write_reg(struct rcar_pcie *pcie, unsigned long val,
unsigned long reg)
{
writel(val, pcie->base + reg);
}
static unsigned long rcar_pci_read_reg(struct rcar_pcie *pcie,
unsigned long reg)
{
return readl(pcie->base + reg);
}
enum {
RCAR_PCI_ACCESS_READ,
RCAR_PCI_ACCESS_WRITE,
};
static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
{
int shift = 8 * (where & 3);
u32 val = rcar_pci_read_reg(pcie, where & ~3);
val &= ~(mask << shift);
val |= data << shift;
rcar_pci_write_reg(pcie, val, where & ~3);
}
static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)
{
int shift = 8 * (where & 3);
u32 val = rcar_pci_read_reg(pcie, where & ~3);
return val >> shift;
}
/* Serialization is provided by 'pci_lock' in drivers/pci/access.c */
static int rcar_pcie_config_access(struct rcar_pcie *pcie,
unsigned char access_type, struct pci_bus *bus,
unsigned int devfn, int where, u32 *data)
{
int dev, func, reg, index;
dev = PCI_SLOT(devfn);
func = PCI_FUNC(devfn);
reg = where & ~3;
index = reg / 4;
/*
* While each channel has its own memory-mapped extended config
* space, it's generally only accessible when in endpoint mode.
* When in root complex mode, the controller is unable to target
* itself with either type 0 or type 1 accesses, and indeed, any
* controller initiated target transfer to its own config space
* result in a completer abort.
*
* Each channel effectively only supports a single device, but as
* the same channel <-> device access works for any PCI_SLOT()
* value, we cheat a bit here and bind the controller's config
* space to devfn 0 in order to enable self-enumeration. In this
* case the regular ECAR/ECDR path is sidelined and the mangled
* config access itself is initiated as an internal bus transaction.
*/
if (pci_is_root_bus(bus)) {
if (dev != 0)
return PCIBIOS_DEVICE_NOT_FOUND;
if (access_type == RCAR_PCI_ACCESS_READ) {
*data = rcar_pci_read_reg(pcie, PCICONF(index));
} else {
/* Keep an eye out for changes to the root bus number */
if (pci_is_root_bus(bus) && (reg == PCI_PRIMARY_BUS))
pcie->root_bus_nr = *data & 0xff;
rcar_pci_write_reg(pcie, *data, PCICONF(index));
}
return PCIBIOS_SUCCESSFUL;
}
if (pcie->root_bus_nr < 0)
return PCIBIOS_DEVICE_NOT_FOUND;
/* Clear errors */
rcar_pci_write_reg(pcie, rcar_pci_read_reg(pcie, PCIEERRFR), PCIEERRFR);
/* Set the PIO address */
rcar_pci_write_reg(pcie, PCIE_CONF_BUS(bus->number) |
PCIE_CONF_DEV(dev) | PCIE_CONF_FUNC(func) | reg, PCIECAR);
/* Enable the configuration access */
if (bus->parent->number == pcie->root_bus_nr)
rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE0, PCIECCTLR);
else
rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE1, PCIECCTLR);
/* Check for errors */
if (rcar_pci_read_reg(pcie, PCIEERRFR) & UNSUPPORTED_REQUEST)
return PCIBIOS_DEVICE_NOT_FOUND;
/* Check for master and target aborts */
if (rcar_read_conf(pcie, RCONF(PCI_STATUS)) &
(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT))
return PCIBIOS_DEVICE_NOT_FOUND;
if (access_type == RCAR_PCI_ACCESS_READ)
*data = rcar_pci_read_reg(pcie, PCIECDR);
else
rcar_pci_write_reg(pcie, *data, PCIECDR);
/* Disable the configuration access */
rcar_pci_write_reg(pcie, 0, PCIECCTLR);
return PCIBIOS_SUCCESSFUL;
}
static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
struct rcar_pcie *pcie = bus->sysdata;
int ret;
ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
bus, devfn, where, val);
if (ret != PCIBIOS_SUCCESSFUL) {
*val = 0xffffffff;
return ret;
}
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
else if (size == 2)
*val = (*val >> (8 * (where & 2))) & 0xffff;
dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
bus->number, devfn, where, size, (unsigned long)*val);
return ret;
}
/* Serialization is provided by 'pci_lock' in drivers/pci/access.c */
static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct rcar_pcie *pcie = bus->sysdata;
int shift, ret;
u32 data;
ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
bus, devfn, where, &data);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
bus->number, devfn, where, size, (unsigned long)val);
if (size == 1) {
shift = 8 * (where & 3);
data &= ~(0xff << shift);
data |= ((val & 0xff) << shift);
} else if (size == 2) {
shift = 8 * (where & 2);
data &= ~(0xffff << shift);
data |= ((val & 0xffff) << shift);
} else
data = val;
ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_WRITE,
bus, devfn, where, &data);
return ret;
}
static struct pci_ops rcar_pcie_ops = {
.read = rcar_pcie_read_conf,
.write = rcar_pcie_write_conf,
};
static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie,
struct resource *res)
{
/* Setup PCIe address space mappings for each resource */
resource_size_t size;
resource_size_t res_start;
u32 mask;
rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win));
/*
* The PAMR mask is calculated in units of 128Bytes, which
* keeps things pretty simple.
*/
size = resource_size(res);
mask = (roundup_pow_of_two(size) / SZ_128) - 1;
rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
if (res->flags & IORESOURCE_IO)
res_start = pci_pio_to_address(res->start);
else
res_start = res->start;
rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win));
rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F,
PCIEPALR(win));
/* First resource is for IO */
mask = PAR_ENABLE;
if (res->flags & IORESOURCE_IO)
mask |= IO_SPACE;
rcar_pci_write_reg(pcie, mask, PCIEPTCTLR(win));
}
static int rcar_pcie_setup(struct list_head *resource, struct rcar_pcie *pci)
{
struct resource_entry *win;
int i = 0;
/* Setup PCI resources */
resource_list_for_each_entry(win, &pci->resources) {
struct resource *res = win->res;
if (!res->flags)
continue;
switch (resource_type(res)) {
case IORESOURCE_IO:
case IORESOURCE_MEM:
rcar_pcie_setup_window(i, pci, res);
i++;
break;
case IORESOURCE_BUS:
pci->root_bus_nr = res->start;
break;
default:
continue;
}
pci_add_resource(resource, res);
}
return 1;
}
static void rcar_pcie_force_speedup(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
unsigned int timeout = 1000;
u32 macsr;
if ((rcar_pci_read_reg(pcie, MACS2R) & LINK_SPEED) != LINK_SPEED_5_0GTS)
return;
if (rcar_pci_read_reg(pcie, MACCTLR) & SPEED_CHANGE) {
dev_err(dev, "Speed change already in progress\n");
return;
}
macsr = rcar_pci_read_reg(pcie, MACSR);
if ((macsr & LINK_SPEED) == LINK_SPEED_5_0GTS)
goto done;
/* Set target link speed to 5.0 GT/s */
rcar_rmw32(pcie, EXPCAP(12), PCI_EXP_LNKSTA_CLS,
PCI_EXP_LNKSTA_CLS_5_0GB);
/* Set speed change reason as intentional factor */
rcar_rmw32(pcie, MACCGSPSETR, SPCNGRSN, 0);
/* Clear SPCHGFIN, SPCHGSUC, and SPCHGFAIL */
if (macsr & (SPCHGFIN | SPCHGSUC | SPCHGFAIL))
rcar_pci_write_reg(pcie, macsr, MACSR);
/* Start link speed change */
rcar_rmw32(pcie, MACCTLR, SPEED_CHANGE, SPEED_CHANGE);
while (timeout--) {
macsr = rcar_pci_read_reg(pcie, MACSR);
if (macsr & SPCHGFIN) {
/* Clear the interrupt bits */
rcar_pci_write_reg(pcie, macsr, MACSR);
if (macsr & SPCHGFAIL)
dev_err(dev, "Speed change failed\n");
goto done;
}
msleep(1);
};
dev_err(dev, "Speed change timed out\n");
done:
dev_info(dev, "Current link speed is %s GT/s\n",
(macsr & LINK_SPEED) == LINK_SPEED_5_0GTS ? "5" : "2.5");
}
static int rcar_pcie_enable(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
struct pci_bus *bus, *child;
LIST_HEAD(res);
/* Try setting 5 GT/s link speed */
rcar_pcie_force_speedup(pcie);
rcar_pcie_setup(&res, pcie);
pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
if (IS_ENABLED(CONFIG_PCI_MSI))
bus = pci_scan_root_bus_msi(dev, pcie->root_bus_nr,
&rcar_pcie_ops, pcie, &res, &pcie->msi.chip);
else
bus = pci_scan_root_bus(dev, pcie->root_bus_nr,
&rcar_pcie_ops, pcie, &res);
if (!bus) {
dev_err(dev, "Scanning rootbus failed");
return -ENODEV;
}
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
return 0;
}
static int phy_wait_for_ack(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
unsigned int timeout = 100;
while (timeout--) {
if (rcar_pci_read_reg(pcie, H1_PCIEPHYADRR) & PHY_ACK)
return 0;
udelay(100);
}
dev_err(dev, "Access to PCIe phy timed out\n");
return -ETIMEDOUT;
}
static void phy_write_reg(struct rcar_pcie *pcie,
unsigned int rate, unsigned int addr,
unsigned int lane, unsigned int data)
{
unsigned long phyaddr;
phyaddr = WRITE_CMD |
((rate & 1) << RATE_POS) |
((lane & 0xf) << LANE_POS) |
((addr & 0xff) << ADR_POS);
/* Set write data */
rcar_pci_write_reg(pcie, data, H1_PCIEPHYDOUTR);
rcar_pci_write_reg(pcie, phyaddr, H1_PCIEPHYADRR);
/* Ignore errors as they will be dealt with if the data link is down */
phy_wait_for_ack(pcie);
/* Clear command */
rcar_pci_write_reg(pcie, 0, H1_PCIEPHYDOUTR);
rcar_pci_write_reg(pcie, 0, H1_PCIEPHYADRR);
/* Ignore errors as they will be dealt with if the data link is down */
phy_wait_for_ack(pcie);
}
static int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie)
{
unsigned int timeout = 10;
while (timeout--) {
if ((rcar_pci_read_reg(pcie, PCIETSTR) & DATA_LINK_ACTIVE))
return 0;
msleep(5);
}
return -ETIMEDOUT;
}
static int rcar_pcie_hw_init(struct rcar_pcie *pcie)
{
int err;
/* Begin initialization */
rcar_pci_write_reg(pcie, 0, PCIETCTLR);
/* Set mode */
rcar_pci_write_reg(pcie, 1, PCIEMSR);
/*
* Initial header for port config space is type 1, set the device
* class to match. Hardware takes care of propagating the IDSETR
* settings, so there is no need to bother with a quirk.
*/
rcar_pci_write_reg(pcie, PCI_CLASS_BRIDGE_PCI << 16, IDSETR1);
/*
* Setup Secondary Bus Number & Subordinate Bus Number, even though
* they aren't used, to avoid bridge being detected as broken.
*/
rcar_rmw32(pcie, RCONF(PCI_SECONDARY_BUS), 0xff, 1);
rcar_rmw32(pcie, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1);
/* Initialize default capabilities. */
rcar_rmw32(pcie, REXPCAP(0), 0xff, PCI_CAP_ID_EXP);
rcar_rmw32(pcie, REXPCAP(PCI_EXP_FLAGS),
PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4);
rcar_rmw32(pcie, RCONF(PCI_HEADER_TYPE), 0x7f,
PCI_HEADER_TYPE_BRIDGE);
/* Enable data link layer active state reporting */
rcar_rmw32(pcie, REXPCAP(PCI_EXP_LNKCAP), PCI_EXP_LNKCAP_DLLLARC,
PCI_EXP_LNKCAP_DLLLARC);
/* Write out the physical slot number = 0 */
rcar_rmw32(pcie, REXPCAP(PCI_EXP_SLTCAP), PCI_EXP_SLTCAP_PSN, 0);
/* Set the completion timer timeout to the maximum 50ms. */
rcar_rmw32(pcie, TLCTLR + 1, 0x3f, 50);
/* Terminate list of capabilities (Next Capability Offset=0) */
rcar_rmw32(pcie, RVCCAP(0), 0xfff00000, 0);
/* Enable MSI */
if (IS_ENABLED(CONFIG_PCI_MSI))
rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR);
/* Finish initialization - establish a PCI Express link */
rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
/* This will timeout if we don't have a link. */
err = rcar_pcie_wait_for_dl(pcie);
if (err)
return err;
/* Enable INTx interrupts */
rcar_rmw32(pcie, PCIEINTXR, 0, 0xF << 8);
wmb();
return 0;
}
static int rcar_pcie_hw_init_h1(struct rcar_pcie *pcie)
{
unsigned int timeout = 10;
/* Initialize the phy */
phy_write_reg(pcie, 0, 0x42, 0x1, 0x0EC34191);
phy_write_reg(pcie, 1, 0x42, 0x1, 0x0EC34180);
phy_write_reg(pcie, 0, 0x43, 0x1, 0x00210188);
phy_write_reg(pcie, 1, 0x43, 0x1, 0x00210188);
phy_write_reg(pcie, 0, 0x44, 0x1, 0x015C0014);
phy_write_reg(pcie, 1, 0x44, 0x1, 0x015C0014);
phy_write_reg(pcie, 1, 0x4C, 0x1, 0x786174A0);
phy_write_reg(pcie, 1, 0x4D, 0x1, 0x048000BB);
phy_write_reg(pcie, 0, 0x51, 0x1, 0x079EC062);
phy_write_reg(pcie, 0, 0x52, 0x1, 0x20000000);
phy_write_reg(pcie, 1, 0x52, 0x1, 0x20000000);
phy_write_reg(pcie, 1, 0x56, 0x1, 0x00003806);
phy_write_reg(pcie, 0, 0x60, 0x1, 0x004B03A5);
phy_write_reg(pcie, 0, 0x64, 0x1, 0x3F0F1F0F);
phy_write_reg(pcie, 0, 0x66, 0x1, 0x00008000);
while (timeout--) {
if (rcar_pci_read_reg(pcie, H1_PCIEPHYSR))
return rcar_pcie_hw_init(pcie);
msleep(5);
}
return -ETIMEDOUT;
}
static int rcar_pcie_hw_init_gen2(struct rcar_pcie *pcie)
{
/*
* These settings come from the R-Car Series, 2nd Generation User's
* Manual, section 50.3.1 (2) Initialization of the physical layer.
*/
rcar_pci_write_reg(pcie, 0x000f0030, GEN2_PCIEPHYADDR);
rcar_pci_write_reg(pcie, 0x00381203, GEN2_PCIEPHYDATA);
rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
rcar_pci_write_reg(pcie, 0x000f0054, GEN2_PCIEPHYADDR);
/* The following value is for DC connection, no termination resistor */
rcar_pci_write_reg(pcie, 0x13802007, GEN2_PCIEPHYDATA);
rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
return rcar_pcie_hw_init(pcie);
}
static int rcar_msi_alloc(struct rcar_msi *chip)
{
int msi;
mutex_lock(&chip->lock);
msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR);
if (msi < INT_PCI_MSI_NR)
set_bit(msi, chip->used);
else
msi = -ENOSPC;
mutex_unlock(&chip->lock);
return msi;
}
static int rcar_msi_alloc_region(struct rcar_msi *chip, int no_irqs)
{
int msi;
mutex_lock(&chip->lock);
msi = bitmap_find_free_region(chip->used, INT_PCI_MSI_NR,
order_base_2(no_irqs));
mutex_unlock(&chip->lock);
return msi;
}
static void rcar_msi_free(struct rcar_msi *chip, unsigned long irq)
{
mutex_lock(&chip->lock);
clear_bit(irq, chip->used);
mutex_unlock(&chip->lock);
}
static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
{
struct rcar_pcie *pcie = data;
struct rcar_msi *msi = &pcie->msi;
struct device *dev = pcie->dev;
unsigned long reg;
reg = rcar_pci_read_reg(pcie, PCIEMSIFR);
/* MSI & INTx share an interrupt - we only handle MSI here */
if (!reg)
return IRQ_NONE;
while (reg) {
unsigned int index = find_first_bit(&reg, 32);
unsigned int irq;
/* clear the interrupt */
rcar_pci_write_reg(pcie, 1 << index, PCIEMSIFR);
irq = irq_find_mapping(msi->domain, index);
if (irq) {
if (test_bit(index, msi->used))
generic_handle_irq(irq);
else
dev_info(dev, "unhandled MSI\n");
} else {
/* Unknown MSI, just clear it */
dev_dbg(dev, "unexpected MSI\n");
}
/* see if there's any more pending in this vector */
reg = rcar_pci_read_reg(pcie, PCIEMSIFR);
}
return IRQ_HANDLED;
}
static int rcar_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
struct msi_desc *desc)
{
struct rcar_msi *msi = to_rcar_msi(chip);
struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
struct msi_msg msg;
unsigned int irq;
int hwirq;
hwirq = rcar_msi_alloc(msi);
if (hwirq < 0)
return hwirq;
irq = irq_find_mapping(msi->domain, hwirq);
if (!irq) {
rcar_msi_free(msi, hwirq);
return -EINVAL;
}
irq_set_msi_desc(irq, desc);
msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE;
msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR);
msg.data = hwirq;
pci_write_msi_msg(irq, &msg);
return 0;
}
static int rcar_msi_setup_irqs(struct msi_controller *chip,
struct pci_dev *pdev, int nvec, int type)
{
struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
struct rcar_msi *msi = to_rcar_msi(chip);
struct msi_desc *desc;
struct msi_msg msg;
unsigned int irq;
int hwirq;
int i;
/* MSI-X interrupts are not supported */
if (type == PCI_CAP_ID_MSIX)
return -EINVAL;
WARN_ON(!list_is_singular(&pdev->dev.msi_list));
desc = list_entry(pdev->dev.msi_list.next, struct msi_desc, list);
hwirq = rcar_msi_alloc_region(msi, nvec);
if (hwirq < 0)
return -ENOSPC;
irq = irq_find_mapping(msi->domain, hwirq);
if (!irq)
return -ENOSPC;
for (i = 0; i < nvec; i++) {
/*
* irq_create_mapping() called from rcar_pcie_probe() pre-
* allocates descs, so there is no need to allocate descs here.
* We can therefore assume that if irq_find_mapping() above
* returns non-zero, then the descs are also successfully
* allocated.
*/
if (irq_set_msi_desc_off(irq, i, desc)) {
/* TODO: clear */
return -EINVAL;
}
}
desc->nvec_used = nvec;
desc->msi_attrib.multiple = order_base_2(nvec);
msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE;
msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR);
msg.data = hwirq;
pci_write_msi_msg(irq, &msg);
return 0;
}
static void rcar_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
{
struct rcar_msi *msi = to_rcar_msi(chip);
struct irq_data *d = irq_get_irq_data(irq);
rcar_msi_free(msi, d->hwirq);
}
static struct irq_chip rcar_msi_irq_chip = {
.name = "R-Car PCIe MSI",
.irq_enable = pci_msi_unmask_irq,
.irq_disable = pci_msi_mask_irq,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
static int rcar_msi_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &rcar_msi_irq_chip, handle_simple_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops msi_domain_ops = {
.map = rcar_msi_map,
};
static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
struct rcar_msi *msi = &pcie->msi;
unsigned long base;
int err, i;
mutex_init(&msi->lock);
msi->chip.dev = dev;
msi->chip.setup_irq = rcar_msi_setup_irq;
msi->chip.setup_irqs = rcar_msi_setup_irqs;
msi->chip.teardown_irq = rcar_msi_teardown_irq;
msi->domain = irq_domain_add_linear(dev->of_node, INT_PCI_MSI_NR,
&msi_domain_ops, &msi->chip);
if (!msi->domain) {
dev_err(dev, "failed to create IRQ domain\n");
return -ENOMEM;
}
for (i = 0; i < INT_PCI_MSI_NR; i++)
irq_create_mapping(msi->domain, i);
/* Two irqs are for MSI, but they are also used for non-MSI irqs */
err = devm_request_irq(dev, msi->irq1, rcar_pcie_msi_irq,
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: stable@vger.kernel.org CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2015-12-11 03:18:20 +08:00
IRQF_SHARED | IRQF_NO_THREAD,
rcar_msi_irq_chip.name, pcie);
if (err < 0) {
dev_err(dev, "failed to request IRQ: %d\n", err);
goto err;
}
err = devm_request_irq(dev, msi->irq2, rcar_pcie_msi_irq,
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: stable@vger.kernel.org CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2015-12-11 03:18:20 +08:00
IRQF_SHARED | IRQF_NO_THREAD,
rcar_msi_irq_chip.name, pcie);
if (err < 0) {
dev_err(dev, "failed to request IRQ: %d\n", err);
goto err;
}
/* setup MSI data target */
msi->pages = __get_free_pages(GFP_KERNEL, 0);
base = virt_to_phys((void *)msi->pages);
rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR);
rcar_pci_write_reg(pcie, 0, PCIEMSIAUR);
/* enable all MSI interrupts */
rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER);
return 0;
err:
irq_domain_remove(msi->domain);
return err;
}
static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
struct resource res;
int err, i;
err = of_address_to_resource(dev->of_node, 0, &res);
if (err)
return err;
pcie->base = devm_ioremap_resource(dev, &res);
if (IS_ERR(pcie->base))
return PTR_ERR(pcie->base);
pcie->clk = devm_clk_get(dev, "pcie");
if (IS_ERR(pcie->clk)) {
dev_err(dev, "cannot get platform clock\n");
return PTR_ERR(pcie->clk);
}
err = clk_prepare_enable(pcie->clk);
if (err)
return err;
pcie->bus_clk = devm_clk_get(dev, "pcie_bus");
if (IS_ERR(pcie->bus_clk)) {
dev_err(dev, "cannot get pcie bus clock\n");
err = PTR_ERR(pcie->bus_clk);
goto fail_clk;
}
err = clk_prepare_enable(pcie->bus_clk);
if (err)
goto fail_clk;
i = irq_of_parse_and_map(dev->of_node, 0);
if (!i) {
dev_err(dev, "cannot get platform resources for msi interrupt\n");
err = -ENOENT;
goto err_map_reg;
}
pcie->msi.irq1 = i;
i = irq_of_parse_and_map(dev->of_node, 1);
if (!i) {
dev_err(dev, "cannot get platform resources for msi interrupt\n");
err = -ENOENT;
goto err_map_reg;
}
pcie->msi.irq2 = i;
return 0;
err_map_reg:
clk_disable_unprepare(pcie->bus_clk);
fail_clk:
clk_disable_unprepare(pcie->clk);
return err;
}
static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
struct of_pci_range *range,
int *index)
{
u64 restype = range->flags;
u64 cpu_addr = range->cpu_addr;
u64 cpu_end = range->cpu_addr + range->size;
u64 pci_addr = range->pci_addr;
u32 flags = LAM_64BIT | LAR_ENABLE;
u64 mask;
u64 size;
int idx = *index;
if (restype & IORESOURCE_PREFETCH)
flags |= LAM_PREFETCH;
/*
* If the size of the range is larger than the alignment of the start
* address, we have to use multiple entries to perform the mapping.
*/
if (cpu_addr > 0) {
unsigned long nr_zeros = __ffs64(cpu_addr);
u64 alignment = 1ULL << nr_zeros;
size = min(range->size, alignment);
} else {
size = range->size;
}
/* Hardware supports max 4GiB inbound region */
size = min(size, 1ULL << 32);
mask = roundup_pow_of_two(size) - 1;
mask &= ~0xf;
while (cpu_addr < cpu_end) {
/*
* Set up 64-bit inbound regions as the range parser doesn't
* distinguish between 32 and 64-bit types.
*/
rcar_pci_write_reg(pcie, lower_32_bits(pci_addr),
PCIEPRAR(idx));
rcar_pci_write_reg(pcie, lower_32_bits(cpu_addr), PCIELAR(idx));
rcar_pci_write_reg(pcie, lower_32_bits(mask) | flags,
PCIELAMR(idx));
rcar_pci_write_reg(pcie, upper_32_bits(pci_addr),
PCIEPRAR(idx + 1));
rcar_pci_write_reg(pcie, upper_32_bits(cpu_addr),
PCIELAR(idx + 1));
rcar_pci_write_reg(pcie, 0, PCIELAMR(idx + 1));
pci_addr += size;
cpu_addr += size;
idx += 2;
if (idx > MAX_NR_INBOUND_MAPS) {
dev_err(pcie->dev, "Failed to map inbound regions!\n");
return -EINVAL;
}
}
*index = idx;
return 0;
}
static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
struct device_node *node)
{
const int na = 3, ns = 2;
int rlen;
parser->node = node;
parser->pna = of_n_addr_cells(node);
parser->np = parser->pna + na + ns;
parser->range = of_get_property(node, "dma-ranges", &rlen);
if (!parser->range)
return -ENOENT;
parser->end = parser->range + rlen / sizeof(__be32);
return 0;
}
static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
struct device_node *np)
{
struct of_pci_range range;
struct of_pci_range_parser parser;
int index = 0;
int err;
if (pci_dma_range_parser_init(&parser, np))
return -EINVAL;
/* Get the dma-ranges from DT */
for_each_of_pci_range(&parser, &range) {
u64 end = range.cpu_addr + range.size - 1;
dev_dbg(pcie->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
range.flags, range.cpu_addr, end, range.pci_addr);
err = rcar_pcie_inbound_ranges(pcie, &range, &index);
if (err)
return err;
}
return 0;
}
static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
{ .compatible = "renesas,pcie-rcar-gen2",
.data = rcar_pcie_hw_init_gen2 },
{ .compatible = "renesas,pcie-r8a7790",
.data = rcar_pcie_hw_init_gen2 },
{ .compatible = "renesas,pcie-r8a7791",
.data = rcar_pcie_hw_init_gen2 },
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
{},
};
static int rcar_pcie_parse_request_of_pci_ranges(struct rcar_pcie *pci)
{
int err;
struct device *dev = pci->dev;
struct device_node *np = dev->of_node;
resource_size_t iobase;
PCI: rcar: Fix pci_remap_iospace() failure path On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped IO, by reserving a chunk of virtual address space starting at PCI_IOBASE and by mapping the PCI host bridges memory address space driving PCI IO cycles to it. PCI host bridge drivers that enable downstream PCI IO cycles map the host bridge memory address responding to PCI IO cycles to the fixed virtual address space through the pci_remap_iospace() API. This means that if the pci_remap_iospace() function fails, the corresponding host bridge PCI IO resource must be considered invalid, in that there is no way for the kernel to actually drive PCI IO transactions if the memory addresses responding to PCI IO cycles cannot be mapped into the CPU virtual address space. The PCI rcar host bridge driver does not remove the PCI IO resource from the host bridge resource windows if the pci_remap_iospace() call fails; this is an actual bug in that the PCI host bridge would consider the PCI IO resource valid (and possibly assign it to downstream devices) even if the kernel was not able to map the PCI host bridge memory address driving IO cycle to the CPU virtual address space (ie pci_remap_iospace() failures). Fix the PCI host bridge driver pci_remap_iospace() failure path, by destroying the PCI host bridge PCI IO resources retrieved through firmware when the pci_remap_iospace() function call fails, therefore preventing the kernel from adding the respective PCI IO resource to the list of PCI host bridge valid resources, fixing the issue. Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Phil Edworthy <phil.edworthy@renesas.com> CC: Simon Horman <horms+renesas@verge.net.au>
2016-08-16 00:50:44 +08:00
struct resource_entry *win, *tmp;
err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
&iobase);
if (err)
return err;
err = devm_request_pci_bus_resources(dev, &pci->resources);
if (err)
goto out_release_res;
PCI: rcar: Fix pci_remap_iospace() failure path On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped IO, by reserving a chunk of virtual address space starting at PCI_IOBASE and by mapping the PCI host bridges memory address space driving PCI IO cycles to it. PCI host bridge drivers that enable downstream PCI IO cycles map the host bridge memory address responding to PCI IO cycles to the fixed virtual address space through the pci_remap_iospace() API. This means that if the pci_remap_iospace() function fails, the corresponding host bridge PCI IO resource must be considered invalid, in that there is no way for the kernel to actually drive PCI IO transactions if the memory addresses responding to PCI IO cycles cannot be mapped into the CPU virtual address space. The PCI rcar host bridge driver does not remove the PCI IO resource from the host bridge resource windows if the pci_remap_iospace() call fails; this is an actual bug in that the PCI host bridge would consider the PCI IO resource valid (and possibly assign it to downstream devices) even if the kernel was not able to map the PCI host bridge memory address driving IO cycle to the CPU virtual address space (ie pci_remap_iospace() failures). Fix the PCI host bridge driver pci_remap_iospace() failure path, by destroying the PCI host bridge PCI IO resources retrieved through firmware when the pci_remap_iospace() function call fails, therefore preventing the kernel from adding the respective PCI IO resource to the list of PCI host bridge valid resources, fixing the issue. Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Phil Edworthy <phil.edworthy@renesas.com> CC: Simon Horman <horms+renesas@verge.net.au>
2016-08-16 00:50:44 +08:00
resource_list_for_each_entry_safe(win, tmp, &pci->resources) {
struct resource *res = win->res;
if (resource_type(res) == IORESOURCE_IO) {
err = pci_remap_iospace(res, iobase);
PCI: rcar: Fix pci_remap_iospace() failure path On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped IO, by reserving a chunk of virtual address space starting at PCI_IOBASE and by mapping the PCI host bridges memory address space driving PCI IO cycles to it. PCI host bridge drivers that enable downstream PCI IO cycles map the host bridge memory address responding to PCI IO cycles to the fixed virtual address space through the pci_remap_iospace() API. This means that if the pci_remap_iospace() function fails, the corresponding host bridge PCI IO resource must be considered invalid, in that there is no way for the kernel to actually drive PCI IO transactions if the memory addresses responding to PCI IO cycles cannot be mapped into the CPU virtual address space. The PCI rcar host bridge driver does not remove the PCI IO resource from the host bridge resource windows if the pci_remap_iospace() call fails; this is an actual bug in that the PCI host bridge would consider the PCI IO resource valid (and possibly assign it to downstream devices) even if the kernel was not able to map the PCI host bridge memory address driving IO cycle to the CPU virtual address space (ie pci_remap_iospace() failures). Fix the PCI host bridge driver pci_remap_iospace() failure path, by destroying the PCI host bridge PCI IO resources retrieved through firmware when the pci_remap_iospace() function call fails, therefore preventing the kernel from adding the respective PCI IO resource to the list of PCI host bridge valid resources, fixing the issue. Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Phil Edworthy <phil.edworthy@renesas.com> CC: Simon Horman <horms+renesas@verge.net.au>
2016-08-16 00:50:44 +08:00
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
PCI: rcar: Fix pci_remap_iospace() failure path On ARM/ARM64 architectures, PCI IO ports are emulated through memory mapped IO, by reserving a chunk of virtual address space starting at PCI_IOBASE and by mapping the PCI host bridges memory address space driving PCI IO cycles to it. PCI host bridge drivers that enable downstream PCI IO cycles map the host bridge memory address responding to PCI IO cycles to the fixed virtual address space through the pci_remap_iospace() API. This means that if the pci_remap_iospace() function fails, the corresponding host bridge PCI IO resource must be considered invalid, in that there is no way for the kernel to actually drive PCI IO transactions if the memory addresses responding to PCI IO cycles cannot be mapped into the CPU virtual address space. The PCI rcar host bridge driver does not remove the PCI IO resource from the host bridge resource windows if the pci_remap_iospace() call fails; this is an actual bug in that the PCI host bridge would consider the PCI IO resource valid (and possibly assign it to downstream devices) even if the kernel was not able to map the PCI host bridge memory address driving IO cycle to the CPU virtual address space (ie pci_remap_iospace() failures). Fix the PCI host bridge driver pci_remap_iospace() failure path, by destroying the PCI host bridge PCI IO resources retrieved through firmware when the pci_remap_iospace() function call fails, therefore preventing the kernel from adding the respective PCI IO resource to the list of PCI host bridge valid resources, fixing the issue. Fixes: 5d2917d469fa ("PCI: rcar: Convert to DT resource parsing API") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Phil Edworthy <phil.edworthy@renesas.com> CC: Simon Horman <horms+renesas@verge.net.au>
2016-08-16 00:50:44 +08:00
resource_list_destroy_entry(win);
}
}
}
return 0;
out_release_res:
pci_free_resource_list(&pci->resources);
return err;
}
static int rcar_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_pcie *pcie;
unsigned int data;
const struct of_device_id *of_id;
int err;
int (*hw_init_fn)(struct rcar_pcie *);
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
return -ENOMEM;
pcie->dev = dev;
INIT_LIST_HEAD(&pcie->resources);
rcar_pcie_parse_request_of_pci_ranges(pcie);
err = rcar_pcie_get_resources(pcie);
if (err < 0) {
dev_err(dev, "failed to request resources: %d\n", err);
return err;
}
err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
if (err)
return err;
of_id = of_match_device(rcar_pcie_of_match, dev);
if (!of_id || !of_id->data)
return -EINVAL;
hw_init_fn = of_id->data;
pm_runtime_enable(dev);
err = pm_runtime_get_sync(dev);
if (err < 0) {
dev_err(dev, "pm_runtime_get_sync failed\n");
goto err_pm_disable;
}
/* Failure to get a link might just be that no cards are inserted */
err = hw_init_fn(pcie);
if (err) {
dev_info(dev, "PCIe link down\n");
err = 0;
goto err_pm_put;
}
data = rcar_pci_read_reg(pcie, MACSR);
dev_info(dev, "PCIe x%d: link up\n", (data >> 20) & 0x3f);
if (IS_ENABLED(CONFIG_PCI_MSI)) {
err = rcar_pcie_enable_msi(pcie);
if (err < 0) {
dev_err(dev,
"failed to enable MSI support: %d\n",
err);
goto err_pm_put;
}
}
err = rcar_pcie_enable(pcie);
if (err)
goto err_pm_put;
return 0;
err_pm_put:
pm_runtime_put(dev);
err_pm_disable:
pm_runtime_disable(dev);
return err;
}
static struct platform_driver rcar_pcie_driver = {
.driver = {
.name = "rcar-pcie",
.of_match_table = rcar_pcie_of_match,
.suppress_bind_attrs = true,
},
.probe = rcar_pcie_probe,
};
builtin_platform_driver(rcar_pcie_driver);