OpenCloudOS-Kernel/drivers/media/usb/cx231xx/cx231xx-dvb.c

989 lines
24 KiB
C
Raw Normal View History

/*
DVB device driver for cx231xx
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx231xx.h"
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
#include <media/tuner.h>
#include "xc5000.h"
#include "s5h1432.h"
#include "tda18271.h"
#include "s5h1411.h"
#include "lgdt3305.h"
#include "si2165.h"
#include "mb86a20s.h"
#include "si2157.h"
#include "lgdt3306a.h"
MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
MODULE_LICENSE("GPL");
static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define CX231XX_DVB_NUM_BUFS 5
#define CX231XX_DVB_MAX_PACKETSIZE 564
#define CX231XX_DVB_MAX_PACKETS 64
struct cx231xx_dvb {
struct dvb_frontend *frontend;
/* feed count management */
struct mutex lock;
int nfeeds;
/* general boilerplate stuff */
struct dvb_adapter adapter;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend fe_hw;
struct dmx_frontend fe_mem;
struct dvb_net net;
struct i2c_client *i2c_client_tuner;
};
static struct s5h1432_config dvico_s5h1432_config = {
.output_mode = S5H1432_SERIAL_OUTPUT,
.gpio = S5H1432_GPIO_ON,
.qam_if = S5H1432_IF_4000,
.vsb_if = S5H1432_IF_4000,
.inversion = S5H1432_INVERSION_OFF,
.status_mode = S5H1432_DEMODLOCKING,
.mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
.dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6,
.if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_std_map mb86a20s_tda18271_config = {
.dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
.if_lvl = 0, .rfagc_top = 0x37, },
};
static struct tda18271_config cnxt_rde253s_tunerconfig = {
.std_map = &cnxt_rde253s_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
};
static struct s5h1411_config tda18271_s5h1411_config = {
.output_mode = S5H1411_SERIAL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_3250,
.qam_if = S5H1411_IF_4000,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
static struct s5h1411_config xc5000_s5h1411_config = {
.output_mode = S5H1411_SERIAL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_3250,
.qam_if = S5H1411_IF_3250,
.inversion = S5H1411_INVERSION_OFF,
.status_mode = S5H1411_DEMODLOCKING,
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
.deny_i2c_rptr = 1,
.spectral_inversion = 1,
.qam_if_khz = 4000,
.vsb_if_khz = 3250,
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
.if_lvl = 1, .rfagc_top = 0x58, },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
.if_lvl = 1, .rfagc_top = 0x58, },
};
static struct tda18271_config hcw_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_DIGITAL,
};
static const struct mb86a20s_config pv_mb86a20s_config = {
.demod_address = 0x10,
.is_serial = true,
};
static struct tda18271_config pv_tda18271_config = {
.std_map = &mb86a20s_tda18271_config,
.gate = TDA18271_GATE_DIGITAL,
.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
};
static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = {
.i2c_addr = 0x64,
.chip_mode = SI2165_MODE_PLL_XTAL,
.ref_freq_Hz = 16000000,
};
static const struct si2165_config pctv_quatro_stick_1114xx_si2165_config = {
.i2c_addr = 0x64,
.chip_mode = SI2165_MODE_PLL_EXT,
.ref_freq_Hz = 24000000,
};
static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = {
.i2c_addr = 0x59,
.qam_if_khz = 4000,
.vsb_if_khz = 3250,
.deny_i2c_rptr = 1,
.spectral_inversion = 1,
.mpeg_mode = LGDT3306A_MPEG_SERIAL,
.tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
.tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
.xtalMHz = 25,
};
static inline void print_err_status(struct cx231xx *dev, int packet, int status)
{
char *errmsg = "Unknown";
switch (status) {
case -ENOENT:
errmsg = "unlinked synchronuously";
break;
case -ECONNRESET:
errmsg = "unlinked asynchronuously";
break;
case -ENOSR:
errmsg = "Buffer error (overrun)";
break;
case -EPIPE:
errmsg = "Stalled (device not responding)";
break;
case -EOVERFLOW:
errmsg = "Babble (bad cable?)";
break;
case -EPROTO:
errmsg = "Bit-stuff error (bad cable?)";
break;
case -EILSEQ:
errmsg = "CRC/Timeout (could be anything)";
break;
case -ETIME:
errmsg = "Device does not respond";
break;
}
if (packet < 0) {
dev_dbg(dev->dev,
"URB status %d [%s].\n", status, errmsg);
} else {
dev_dbg(dev->dev,
"URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
{
int i;
if (!dev)
return 0;
if (dev->state & DEV_DISCONNECTED)
return 0;
if (urb->status < 0) {
print_err_status(dev, -1, urb->status);
if (urb->status == -ENOENT)
return 0;
}
for (i = 0; i < urb->number_of_packets; i++) {
int status = urb->iso_frame_desc[i].status;
if (status < 0) {
print_err_status(dev, i, status);
if (urb->iso_frame_desc[i].status != -EPROTO)
continue;
}
dvb_dmx_swfilter(&dev->dvb->demux,
urb->transfer_buffer +
urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
return 0;
}
static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb)
{
if (!dev)
return 0;
if (dev->state & DEV_DISCONNECTED)
return 0;
if (urb->status < 0) {
print_err_status(dev, -1, urb->status);
if (urb->status == -ENOENT)
return 0;
}
/* Feed the transport payload into the kernel demux */
dvb_dmx_swfilter(&dev->dvb->demux,
urb->transfer_buffer, urb->actual_length);
return 0;
}
static int start_streaming(struct cx231xx_dvb *dvb)
{
int rc;
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
dev_dbg(dev->dev, "DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
return rc;
dev->mode_tv = 1;
return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
CX231XX_DVB_NUM_BUFS,
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
dev_dbg(dev->dev, "DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
return rc;
dev->mode_tv = 1;
return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS,
CX231XX_DVB_NUM_BUFS,
dev->ts1_mode.max_pkt_size,
dvb_bulk_copy);
}
}
static int stop_streaming(struct cx231xx_dvb *dvb)
{
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO)
cx231xx_uninit_isoc(dev);
else
cx231xx_uninit_bulk(dev);
cx231xx_set_mode(dev, CX231XX_SUSPEND);
return 0;
}
static int start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx231xx_dvb *dvb = demux->priv;
int rc, ret;
if (!demux->dmx.frontend)
return -EINVAL;
mutex_lock(&dvb->lock);
dvb->nfeeds++;
rc = dvb->nfeeds;
if (dvb->nfeeds == 1) {
ret = start_streaming(dvb);
if (ret < 0)
rc = ret;
}
mutex_unlock(&dvb->lock);
return rc;
}
static int stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx231xx_dvb *dvb = demux->priv;
int err = 0;
mutex_lock(&dvb->lock);
dvb->nfeeds--;
if (0 == dvb->nfeeds)
err = stop_streaming(dvb);
mutex_unlock(&dvb->lock);
return err;
}
/* ------------------------------------------------------------------ */
static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
{
struct cx231xx *dev = fe->dvb->priv;
if (acquire)
return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
else
return cx231xx_set_mode(dev, CX231XX_SUSPEND);
}
/* ------------------------------------------------------------------ */
static struct xc5000_config cnxt_rde250_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 4000,
};
static struct xc5000_config cnxt_rdu250_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 3250,
};
/* ------------------------------------------------------------------ */
#if 0
static int attach_xc5000(u8 addr, struct cx231xx *dev)
{
struct dvb_frontend *fe;
struct xc5000_config cfg;
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_adap = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
dev_err(dev->dev, "%s/2: dvb frontend not attached. "
"Can't attach xc5000\n", dev->name);
return -EINVAL;
}
fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
if (!fe) {
dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name);
dvb_frontend_detach(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name);
return 0;
}
#endif
int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq)
{
if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
if (dops->set_analog_params != NULL) {
struct analog_parameters params;
params.frequency = freq;
params.std = dev->norm;
params.mode = 0; /* 0- Air; 1 - cable */
/*params.audmode = ; */
/* Set the analog parameters to set the frequency */
dops->set_analog_params(dev->dvb->frontend, &params);
}
}
return 0;
}
int cx231xx_reset_analog_tuner(struct cx231xx *dev)
{
int status = 0;
if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
if (dops->init != NULL && !dev->xc_fw_load_done) {
dev_dbg(dev->dev,
"Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
dev_dbg(dev->dev,
"XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
dev_dbg(dev->dev,
"XC5000 firmware download failed !!!\n");
}
}
}
return status;
}
/* ------------------------------------------------------------------ */
static int register_dvb(struct cx231xx_dvb *dvb,
struct module *module,
struct cx231xx *dev, struct device *device)
{
int result;
mutex_init(&dvb->lock);
/* register adapter */
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
adapter_nr);
if (result < 0) {
dev_warn(dev->dev,
"%s: dvb_register_adapter failed (errno = %d)\n",
dev->name, result);
goto fail_adapter;
}
dvb_register_media_controller(&dvb->adapter, dev->media_dev);
/* Ensure all frontends negotiate bus access */
dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
dvb->adapter.priv = dev;
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
dev_warn(dev->dev,
"%s: dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend;
}
/* register demux stuff */
dvb->demux.dmx.capabilities =
DMX_TS_FILTERING | DMX_SECTION_FILTERING |
DMX_MEMORY_BASED_FILTERING;
dvb->demux.priv = dvb;
dvb->demux.filternum = 256;
dvb->demux.feednum = 256;
dvb->demux.start_feed = start_feed;
dvb->demux.stop_feed = stop_feed;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
dev_warn(dev->dev,
"%s: dvb_dmx_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmx;
}
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = &dvb->demux.dmx;
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
dev_warn(dev->dev,
"%s: dvb_dmxdev_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmxdev;
}
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
dev_warn(dev->dev,
"%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
dev->name, result);
goto fail_fe_hw;
}
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
dev_warn(dev->dev,
"%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
dev->name, result);
goto fail_fe_mem;
}
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
dev_warn(dev->dev,
"%s: connect_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_fe_conn;
}
/* register network adapter */
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
result = dvb_create_media_graph(&dvb->adapter,
dev->tuner_type == TUNER_ABSENT);
if (result < 0)
goto fail_create_graph;
return 0;
fail_create_graph:
dvb_net_release(&dvb->net);
fail_fe_conn:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
fail_fe_mem:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
fail_fe_hw:
dvb_dmxdev_release(&dvb->dmxdev);
fail_dmxdev:
dvb_dmx_release(&dvb->demux);
fail_dmx:
dvb_unregister_frontend(dvb->frontend);
fail_frontend:
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
fail_adapter:
return result;
}
static void unregister_dvb(struct cx231xx_dvb *dvb)
{
struct i2c_client *client;
dvb_net_release(&dvb->net);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(&dvb->demux);
client = dvb->i2c_client_tuner;
/* remove I2C tuner */
if (client) {
module_put(client->dev.driver->owner);
i2c_unregister_device(client);
}
dvb_unregister_frontend(dvb->frontend);
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
}
static int dvb_init(struct cx231xx *dev)
{
int result = 0;
struct cx231xx_dvb *dvb;
struct i2c_adapter *tuner_i2c;
struct i2c_adapter *demod_i2c;
if (!dev->board.has_dvb) {
/* This device does not support the extension */
return 0;
}
dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
dev_info(dev->dev,
"cx231xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
dev->dvb = dvb;
dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
tuner_i2c = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
demod_i2c = cx231xx_get_i2c_adap(dev, dev->board.demod_i2c_master);
mutex_lock(&dev->lock);
cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
cx231xx_demod_reset(dev);
/* init frontend */
switch (dev->model) {
case CX231XX_BOARD_CNXT_CARRAERA:
case CX231XX_BOARD_CNXT_RDE_250:
dev->dvb->frontend = dvb_attach(s5h1432_attach,
&dvico_s5h1432_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
tuner_i2c,
&cnxt_rde250_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
break;
case CX231XX_BOARD_CNXT_SHELBY:
case CX231XX_BOARD_CNXT_RDU_250:
dev->dvb->frontend = dvb_attach(s5h1411_attach,
&xc5000_s5h1411_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
tuner_i2c,
&cnxt_rdu250_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
break;
case CX231XX_BOARD_CNXT_RDE_253S:
dev->dvb->frontend = dvb_attach(s5h1432_attach,
&dvico_s5h1432_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, tuner_i2c,
&cnxt_rde253s_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
break;
case CX231XX_BOARD_CNXT_RDU_253S:
case CX231XX_BOARD_KWORLD_UB445_USB_HYBRID:
dev->dvb->frontend = dvb_attach(s5h1411_attach,
&tda18271_s5h1411_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, tuner_i2c,
&cnxt_rde253s_tunerconfig)) {
result = -EINVAL;
goto out_free;
}
break;
case CX231XX_BOARD_HAUPPAUGE_EXETER:
dev_info(dev->dev,
"%s: looking for tuner / demod on i2c bus: %d\n",
__func__, i2c_adapter_id(tuner_i2c));
dev->dvb->frontend = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach LG3305 front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, tuner_i2c,
&hcw_tda18271_config);
break;
case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
dev->dvb->frontend = dvb_attach(si2165_attach,
&hauppauge_930C_HD_1113xx_si2165_config,
demod_i2c
);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
}
dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60,
tuner_i2c,
&hcw_tda18271_config);
dev->cx231xx_reset_analog_tuner = NULL;
break;
case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
{
struct i2c_client *client;
struct i2c_board_info info;
struct si2157_config si2157_config;
memset(&info, 0, sizeof(struct i2c_board_info));
dev->dvb->frontend = dvb_attach(si2165_attach,
&pctv_quatro_stick_1114xx_si2165_config,
demod_i2c
);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
}
dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
/* attach tuner */
memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = dev->dvb->frontend;
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
si2157_config.mdev = dev->media_dev;
#endif
si2157_config.if_port = 1;
si2157_config.inversion = true;
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
info.addr = 0x60;
info.platform_data = &si2157_config;
request_module("si2157");
client = i2c_new_device(
tuner_i2c,
&info);
if (client == NULL || client->dev.driver == NULL) {
dvb_frontend_detach(dev->dvb->frontend);
result = -ENODEV;
goto out_free;
}
if (!try_module_get(client->dev.driver->owner)) {
i2c_unregister_device(client);
dvb_frontend_detach(dev->dvb->frontend);
result = -ENODEV;
goto out_free;
}
dev->cx231xx_reset_analog_tuner = NULL;
dev->dvb->i2c_client_tuner = client;
break;
}
case CX231XX_BOARD_HAUPPAUGE_955Q:
{
struct i2c_client *client;
struct i2c_board_info info;
struct si2157_config si2157_config;
memset(&info, 0, sizeof(struct i2c_board_info));
dev->dvb->frontend = dvb_attach(lgdt3306a_attach,
&hauppauge_955q_lgdt3306a_config,
demod_i2c
);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach LGDT3306A frontend.\n");
result = -EINVAL;
goto out_free;
}
dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
/* attach tuner */
memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = dev->dvb->frontend;
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
si2157_config.mdev = dev->media_dev;
#endif
si2157_config.if_port = 1;
si2157_config.inversion = true;
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
info.addr = 0x60;
info.platform_data = &si2157_config;
request_module("si2157");
client = i2c_new_device(
tuner_i2c,
&info);
if (client == NULL || client->dev.driver == NULL) {
dvb_frontend_detach(dev->dvb->frontend);
result = -ENODEV;
goto out_free;
}
if (!try_module_get(client->dev.driver->owner)) {
i2c_unregister_device(client);
dvb_frontend_detach(dev->dvb->frontend);
result = -ENODEV;
goto out_free;
}
dev->cx231xx_reset_analog_tuner = NULL;
dev->dvb->i2c_client_tuner = client;
break;
}
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
dev_info(dev->dev,
"%s: looking for demod on i2c bus: %d\n",
__func__, i2c_adapter_id(tuner_i2c));
dev->dvb->frontend = dvb_attach(mb86a20s_attach,
&pv_mb86a20s_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
dev_err(dev->dev,
"Failed to attach mb86a20s demod\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
dvb_attach(tda18271_attach, dev->dvb->frontend,
0x60, tuner_i2c,
&pv_tda18271_config);
break;
default:
dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
break;
}
if (NULL == dvb->frontend) {
dev_err(dev->dev,
"%s/2: frontend initialization failed\n", dev->name);
result = -EINVAL;
goto out_free;
}
/* register everything */
result = register_dvb(dvb, THIS_MODULE, dev, dev->dev);
if (result < 0)
goto out_free;
dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n");
ret:
cx231xx_set_mode(dev, CX231XX_SUSPEND);
mutex_unlock(&dev->lock);
return result;
out_free:
kfree(dvb);
dev->dvb = NULL;
goto ret;
}
static int dvb_fini(struct cx231xx *dev)
{
if (!dev->board.has_dvb) {
/* This device does not support the extension */
return 0;
}
if (dev->dvb) {
unregister_dvb(dev->dvb);
dev->dvb = NULL;
}
return 0;
}
static struct cx231xx_ops dvb_ops = {
.id = CX231XX_DVB,
.name = "Cx231xx dvb Extension",
.init = dvb_init,
.fini = dvb_fini,
};
static int __init cx231xx_dvb_register(void)
{
return cx231xx_register_extension(&dvb_ops);
}
static void __exit cx231xx_dvb_unregister(void)
{
cx231xx_unregister_extension(&dvb_ops);
}
module_init(cx231xx_dvb_register);
module_exit(cx231xx_dvb_unregister);