UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/scsi/arm/eesox.c

646 lines
16 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/drivers/acorn/scsi/eesox.c
*
* Copyright (C) 1997-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver is based on experimentation. Hence, it may have made
* assumptions about the particular card that I have available, and
* may not be reliable!
*
* Changelog:
* 01-10-1997 RMK Created, READONLY version
* 15-02-1998 RMK READ/WRITE version
* added DMA support and hardware definitions
* 14-03-1998 RMK Updated DMA support
* Added terminator control
* 15-04-1998 RMK Only do PIO if FAS216 will allow it.
* 27-06-1998 RMK Changed asm/delay.h to linux/delay.h
* 02-04-2000 RMK 0.0.3 Fixed NO_IRQ/NO_DMA problem, updated for new
* error handling code.
*/
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/pgtable.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
#include "fas216.h"
#include "scsi.h"
#include <scsi/scsicam.h>
#define EESOX_FAS216_OFFSET 0x3000
#define EESOX_FAS216_SHIFT 5
#define EESOX_DMASTAT 0x2800
#define EESOX_STAT_INTR 0x01
#define EESOX_STAT_DMA 0x02
#define EESOX_CONTROL 0x2800
#define EESOX_INTR_ENABLE 0x04
#define EESOX_TERM_ENABLE 0x02
#define EESOX_RESET 0x01
#define EESOX_DMADATA 0x3800
#define VERSION "1.10 (17/01/2003 2.5.59)"
/*
* Use term=0,1,0,0,0 to turn terminators on/off
*/
static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
#define NR_SG 256
struct eesoxscsi_info {
FAS216_Info info;
struct expansion_card *ec;
void __iomem *base;
void __iomem *ctl_port;
unsigned int control;
struct scatterlist sg[NR_SG]; /* Scatter DMA list */
};
/* Prototype: void eesoxscsi_irqenable(ec, irqnr)
* Purpose : Enable interrupts on EESOX SCSI card
* Params : ec - expansion card structure
* : irqnr - interrupt number
*/
static void
eesoxscsi_irqenable(struct expansion_card *ec, int irqnr)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)ec->irq_data;
info->control |= EESOX_INTR_ENABLE;
writeb(info->control, info->ctl_port);
}
/* Prototype: void eesoxscsi_irqdisable(ec, irqnr)
* Purpose : Disable interrupts on EESOX SCSI card
* Params : ec - expansion card structure
* : irqnr - interrupt number
*/
static void
eesoxscsi_irqdisable(struct expansion_card *ec, int irqnr)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)ec->irq_data;
info->control &= ~EESOX_INTR_ENABLE;
writeb(info->control, info->ctl_port);
}
static const expansioncard_ops_t eesoxscsi_ops = {
.irqenable = eesoxscsi_irqenable,
.irqdisable = eesoxscsi_irqdisable,
};
/* Prototype: void eesoxscsi_terminator_ctl(*host, on_off)
* Purpose : Turn the EESOX SCSI terminators on or off
* Params : host - card to turn on/off
* : on_off - !0 to turn on, 0 to turn off
*/
static void
eesoxscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
unsigned long flags;
spin_lock_irqsave(host->host_lock, flags);
if (on_off)
info->control |= EESOX_TERM_ENABLE;
else
info->control &= ~EESOX_TERM_ENABLE;
writeb(info->control, info->ctl_port);
spin_unlock_irqrestore(host->host_lock, flags);
}
/* Prototype: void eesoxscsi_intr(irq, *dev_id, *regs)
* Purpose : handle interrupts from EESOX SCSI card
* Params : irq - interrupt number
* dev_id - user-defined (Scsi_Host structure)
*/
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
eesoxscsi_intr(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct eesoxscsi_info *info = dev_id;
return fas216_intr(&info->info);
}
/* Prototype: fasdmatype_t eesoxscsi_dma_setup(host, SCpnt, direction, min_type)
* Purpose : initialises DMA/PIO
* Params : host - host
* SCpnt - command
* direction - DMA on to/off of card
* min_type - minimum DMA support that we must have for this transfer
* Returns : type of transfer to be performed
*/
static fasdmatype_t
[SCSI] remove Scsi_Pointer typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-01 01:31:56 +08:00
eesoxscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fasdmadir_t direction, fasdmatype_t min_type)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
struct device *dev = scsi_get_device(host);
int dmach = info->info.scsi.dma;
if (dmach != NO_DMA &&
(min_type == fasdma_real_all || SCp->this_residual >= 512)) {
int bufs, map_dir, dma_dir;
bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG);
if (direction == DMA_OUT)
map_dir = DMA_TO_DEVICE,
dma_dir = DMA_MODE_WRITE;
else
map_dir = DMA_FROM_DEVICE,
dma_dir = DMA_MODE_READ;
[ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries An off-by-one bug meant we were always trying to map one too many scatterlist entries. This was mostly harmless prior to the checks going in to consistent_sync(), but now causes the kernel to BUG. Also, powertec.c was missing an assignment to info->ec. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-05 04:21:38 +08:00
dma_map_sg(dev, info->sg, bufs, map_dir);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
disable_dma(dmach);
[ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries An off-by-one bug meant we were always trying to map one too many scatterlist entries. This was mostly harmless prior to the checks going in to consistent_sync(), but now causes the kernel to BUG. Also, powertec.c was missing an assignment to info->ec. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-05 04:21:38 +08:00
set_dma_sg(dmach, info->sg, bufs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
set_dma_mode(dmach, dma_dir);
enable_dma(dmach);
return fasdma_real_all;
}
/*
* We don't do DMA, we only do slow PIO
*
* Some day, we will do Pseudo DMA
*/
return fasdma_pseudo;
}
static void eesoxscsi_buffer_in(void *buf, int length, void __iomem *base)
{
const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
const void __iomem *reg_dmadata = base + EESOX_DMADATA;
Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-18 03:11:19 +08:00
register const unsigned long mask = 0xffff;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
do {
unsigned int status;
/*
* Interrupt request?
*/
status = readb(reg_fas + (REG_STAT << EESOX_FAS216_SHIFT));
if (status & STAT_INT)
break;
/*
* DMA request active?
*/
status = readb(reg_dmastat);
if (!(status & EESOX_STAT_DMA))
continue;
/*
* Get number of bytes in FIFO
*/
status = readb(reg_fas + (REG_CFIS << EESOX_FAS216_SHIFT)) & CFIS_CF;
if (status > 16)
status = 16;
if (status > length)
status = length;
/*
* Align buffer.
*/
if (((u32)buf) & 2 && status >= 2) {
*(u16 *)buf = readl(reg_dmadata);
buf += 2;
status -= 2;
length -= 2;
}
if (status >= 8) {
unsigned long l1, l2;
l1 = readl(reg_dmadata) & mask;
l1 |= readl(reg_dmadata) << 16;
l2 = readl(reg_dmadata) & mask;
l2 |= readl(reg_dmadata) << 16;
*(u32 *)buf = l1;
buf += 4;
*(u32 *)buf = l2;
buf += 4;
length -= 8;
continue;
}
if (status >= 4) {
unsigned long l1;
l1 = readl(reg_dmadata) & mask;
l1 |= readl(reg_dmadata) << 16;
*(u32 *)buf = l1;
buf += 4;
length -= 4;
continue;
}
if (status >= 2) {
*(u16 *)buf = readl(reg_dmadata);
buf += 2;
length -= 2;
}
} while (length);
}
static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base)
{
const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
scsi: eesox: use __iomem pointers for MMIO ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-15 04:31:51 +08:00
void __iomem *reg_dmadata = base + EESOX_DMADATA;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
do {
unsigned int status;
/*
* Interrupt request?
*/
status = readb(reg_fas + (REG_STAT << EESOX_FAS216_SHIFT));
if (status & STAT_INT)
break;
/*
* DMA request active?
*/
status = readb(reg_dmastat);
if (!(status & EESOX_STAT_DMA))
continue;
/*
* Get number of bytes in FIFO
*/
status = readb(reg_fas + (REG_CFIS << EESOX_FAS216_SHIFT)) & CFIS_CF;
if (status > 16)
status = 16;
status = 16 - status;
if (status > length)
status = length;
status &= ~1;
/*
* Align buffer.
*/
if (((u32)buf) & 2 && status >= 2) {
writel(*(u16 *)buf << 16, reg_dmadata);
buf += 2;
status -= 2;
length -= 2;
}
if (status >= 8) {
unsigned long l1, l2;
l1 = *(u32 *)buf;
buf += 4;
l2 = *(u32 *)buf;
buf += 4;
writel(l1 << 16, reg_dmadata);
writel(l1, reg_dmadata);
writel(l2 << 16, reg_dmadata);
writel(l2, reg_dmadata);
length -= 8;
continue;
}
if (status >= 4) {
unsigned long l1;
l1 = *(u32 *)buf;
buf += 4;
writel(l1 << 16, reg_dmadata);
writel(l1, reg_dmadata);
length -= 4;
continue;
}
if (status >= 2) {
writel(*(u16 *)buf << 16, reg_dmadata);
buf += 2;
length -= 2;
}
} while (length);
}
static void
[SCSI] remove Scsi_Pointer typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-01 01:31:56 +08:00
eesoxscsi_dma_pseudo(struct Scsi_Host *host, struct scsi_pointer *SCp,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fasdmadir_t dir, int transfer_size)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
if (dir == DMA_IN) {
eesoxscsi_buffer_in(SCp->ptr, SCp->this_residual, info->base);
} else {
eesoxscsi_buffer_out(SCp->ptr, SCp->this_residual, info->base);
}
}
/* Prototype: int eesoxscsi_dma_stop(host, SCpnt)
* Purpose : stops DMA/PIO
* Params : host - host
* SCpnt - command
*/
static void
[SCSI] remove Scsi_Pointer typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-01 01:31:56 +08:00
eesoxscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
if (info->info.scsi.dma != NO_DMA)
disable_dma(info->info.scsi.dma);
}
/* Prototype: const char *eesoxscsi_info(struct Scsi_Host * host)
* Purpose : returns a descriptive string about this interface,
* Params : host - driver host structure to return info for.
* Returns : pointer to a static buffer containing null terminated string.
*/
const char *eesoxscsi_info(struct Scsi_Host *host)
{
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
static char string[150];
sprintf(string, "%s (%s) in slot %d v%s terminators o%s",
host->hostt->name, info->info.scsi.type, info->ec->slot_no,
VERSION, info->control & EESOX_TERM_ENABLE ? "n" : "ff");
return string;
}
/* Prototype: int eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
* Purpose : Set a driver specific function
* Params : host - host to setup
* : buffer - buffer containing string describing operation
* : length - length of string
* Returns : -EINVAL, or 0
*/
static int
eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
{
int ret = length;
if (length >= 9 && strncmp(buffer, "EESOXSCSI", 9) == 0) {
buffer += 9;
length -= 9;
if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
if (buffer[5] == '1')
eesoxscsi_terminator_ctl(host, 1);
else if (buffer[5] == '0')
eesoxscsi_terminator_ctl(host, 0);
else
ret = -EINVAL;
} else
ret = -EINVAL;
} else
ret = -EINVAL;
return ret;
}
fas216: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 16:42:22 +08:00
static int eesoxscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct eesoxscsi_info *info;
info = (struct eesoxscsi_info *)host->hostdata;
fas216: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 16:42:22 +08:00
seq_printf(m, "EESOX SCSI driver v%s\n", VERSION);
fas216_print_host(&info->info, m);
seq_printf(m, "Term : o%s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
info->control & EESOX_TERM_ENABLE ? "n" : "ff");
fas216: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 16:42:22 +08:00
fas216_print_stats(&info->info, m);
fas216_print_devices(&info->info, m);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 18:43:37 +08:00
static ssize_t eesoxscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct expansion_card *ec = ECARD_DEV(dev);
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
return sprintf(buf, "%d\n", info->control & EESOX_TERM_ENABLE ? 1 : 0);
}
[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 18:43:37 +08:00
static ssize_t eesoxscsi_store_term(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct expansion_card *ec = ECARD_DEV(dev);
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
unsigned long flags;
if (len > 1) {
spin_lock_irqsave(host->host_lock, flags);
if (buf[0] != '0') {
info->control |= EESOX_TERM_ENABLE;
} else {
info->control &= ~EESOX_TERM_ENABLE;
}
writeb(info->control, info->ctl_port);
spin_unlock_irqrestore(host->host_lock, flags);
}
return len;
}
static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
eesoxscsi_show_term, eesoxscsi_store_term);
[SCSI] remove Scsi_Host_Template typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-01 01:31:40 +08:00
static struct scsi_host_template eesox_template = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.module = THIS_MODULE,
fas216: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 16:42:22 +08:00
.show_info = eesoxscsi_show_info,
.write_info = eesoxscsi_set_proc_info,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.name = "EESOX SCSI",
.info = eesoxscsi_info,
.queuecommand = fas216_queue_command,
.eh_host_reset_handler = fas216_eh_host_reset,
.eh_bus_reset_handler = fas216_eh_bus_reset,
.eh_device_reset_handler = fas216_eh_device_reset,
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
[ARM] dma: Use sensible DMA parameters for Acorn drivers The hardware supports transfers up to a page boundary per buffer. Currently, we work around that in the DMA code by splitting each buffer up as we run through the scatterlist. Avoid this by telling the block layers about the hardware restriction. Eventually, this will allow us to phase out the splitting code, but not until the old IDE layer allows us to control the value it gives to blk_queue_segment_boundary(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-12 00:37:06 +08:00
.sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
.dma_boundary = IOMD_DMA_BOUNDARY,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "eesox",
};
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:08:55 +08:00
static int eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct Scsi_Host *host;
struct eesoxscsi_info *info;
void __iomem *base;
int ret;
ret = ecard_request_resources(ec);
if (ret)
goto out;
[ARM] ecard: add ecardm_iomap() / ecardm_iounmap() Add devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion cards. Convert all expansion card drivers to use them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 01:40:51 +08:00
base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!base) {
ret = -ENOMEM;
goto out_region;
}
host = scsi_host_alloc(&eesox_template,
sizeof(struct eesoxscsi_info));
if (!host) {
ret = -ENOMEM;
[ARM] ecard: add ecardm_iomap() / ecardm_iounmap() Add devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion cards. Convert all expansion card drivers to use them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 01:40:51 +08:00
goto out_region;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ecard_set_drvdata(ec, host);
info = (struct eesoxscsi_info *)host->hostdata;
info->ec = ec;
info->base = base;
info->ctl_port = base + EESOX_CONTROL;
info->control = term[ec->slot_no] ? EESOX_TERM_ENABLE : 0;
writeb(info->control, info->ctl_port);
info->info.scsi.io_base = base + EESOX_FAS216_OFFSET;
info->info.scsi.io_shift = EESOX_FAS216_SHIFT;
info->info.scsi.irq = ec->irq;
info->info.scsi.dma = ec->dma;
info->info.ifcfg.clockrate = 40; /* MHz */
info->info.ifcfg.select_timeout = 255;
info->info.ifcfg.asyncperiod = 200; /* ns */
info->info.ifcfg.sync_max_depth = 7;
info->info.ifcfg.cntl3 = CNTL3_FASTSCSI | CNTL3_FASTCLK;
info->info.ifcfg.disconnect_ok = 1;
info->info.ifcfg.wide_max_size = 0;
info->info.ifcfg.capabilities = FASCAP_PSEUDODMA;
info->info.dma.setup = eesoxscsi_dma_setup;
info->info.dma.pseudo = eesoxscsi_dma_pseudo;
info->info.dma.stop = eesoxscsi_dma_stop;
ec->irqaddr = base + EESOX_DMASTAT;
ec->irqmask = EESOX_STAT_INTR;
[ARM] ecard: add helper function for setting ecard irq ops Rather than having every driver fiddle about setting its private IRQ operations and data, provide a helper function to contain this functionality in one place. Arrange to remove the driver-private IRQ operations and data when the device is removed from the driver, and remove the driver private code to do this. This fixes potential problems caused by drivers forgetting to remove these hooks. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-10 23:46:13 +08:00
ecard_setirq(ec, &eesoxscsi_ops, info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
device_create_file(&ec->dev, &dev_attr_bus_term);
ret = fas216_init(host);
if (ret)
goto out_free;
ret = request_irq(ec->irq, eesoxscsi_intr, 0, "eesoxscsi", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
goto out_remove;
}
if (info->info.scsi.dma != NO_DMA) {
if (request_dma(info->info.scsi.dma, "eesox")) {
printk("scsi%d: DMA%d not free, DMA disabled\n",
host->host_no, info->info.scsi.dma);
info->info.scsi.dma = NO_DMA;
} else {
set_dma_speed(info->info.scsi.dma, 180);
info->info.ifcfg.capabilities |= FASCAP_DMA;
info->info.ifcfg.cntl3 |= CNTL3_BS8;
}
}
ret = fas216_add(host, &ec->dev);
if (ret == 0)
goto out;
if (info->info.scsi.dma != NO_DMA)
free_dma(info->info.scsi.dma);
free_irq(ec->irq, host);
out_remove:
fas216_remove(host);
out_free:
device_remove_file(&ec->dev, &dev_attr_bus_term);
scsi_host_put(host);
out_region:
ecard_release_resources(ec);
out:
return ret;
}
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:08:55 +08:00
static void eesoxscsi_remove(struct expansion_card *ec)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
ecard_set_drvdata(ec, NULL);
fas216_remove(host);
if (info->info.scsi.dma != NO_DMA)
free_dma(info->info.scsi.dma);
free_irq(ec->irq, info);
device_remove_file(&ec->dev, &dev_attr_bus_term);
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
}
static const struct ecard_id eesoxscsi_cids[] = {
{ MANU_EESOX, PROD_EESOX_SCSI2 },
{ 0xffff, 0xffff },
};
static struct ecard_driver eesoxscsi_driver = {
.probe = eesoxscsi_probe,
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:08:55 +08:00
.remove = eesoxscsi_remove,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.id_table = eesoxscsi_cids,
.drv = {
.name = "eesoxscsi",
},
};
static int __init eesox_init(void)
{
return ecard_register_driver(&eesoxscsi_driver);
}
static void __exit eesox_exit(void)
{
ecard_remove_driver(&eesoxscsi_driver);
}
module_init(eesox_init);
module_exit(eesox_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("EESOX 'Fast' SCSI driver for Acorn machines");
[PATCH] Remove MODULE_PARM MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 19:07:05 +08:00
module_param_array(term, int, NULL, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_PARM_DESC(term, "SCSI bus termination");
MODULE_LICENSE("GPL");