OpenCloudOS-Kernel/drivers/scsi/sym53c8xx_2/sym_glue.c

/*
 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 
 * of PCI-SCSI IO processors.
 *
 * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
 * Copyright (c) 2003-2005  Matthew Wilcox <matthew@wil.cx>
 *
 * This driver is derived from the Linux sym53c8xx driver.
 * Copyright (C) 1998-2000  Gerard Roudier
 *
 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 
 * a port of the FreeBSD ncr driver to Linux-1.2.13.
 *
 * The original ncr driver has been written for 386bsd and FreeBSD by
 *         Wolfgang Stanglmeier        <wolf@cologne.de>
 *         Stefan Esser                <se@mi.Uni-Koeln.de>
 * Copyright (C) 1994  Wolfgang Stanglmeier
 *
 * Other major contributions:
 *
 * NVRAM detection and reading.
 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
 *
 *-----------------------------------------------------------------------------
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport.h>

#include "sym_glue.h"
#include "sym_nvram.h"

#define NAME53C		"sym53c"
#define NAME53C8XX	"sym53c8xx"

/* SPARC just has to be different ... */
#ifdef __sparc__
#define IRQ_FMT "%s"
#define IRQ_PRM(x) __irq_itoa(x)
#else
#define IRQ_FMT "%d"
#define IRQ_PRM(x) (x)
#endif

struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
unsigned int sym_debug_flags = 0;

static char *excl_string;
static char *safe_string;
module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0);
module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
module_param_named(irqm, sym_driver_setup.irq_mode, byte, 0);
module_param_named(buschk, sym_driver_setup.scsi_bus_check, byte, 0);
module_param_named(hostid, sym_driver_setup.host_id, byte, 0);
module_param_named(verb, sym_driver_setup.verbose, byte, 0);
module_param_named(debug, sym_debug_flags, uint, 0);
module_param_named(settle, sym_driver_setup.settle_delay, byte, 0);
module_param_named(nvram, sym_driver_setup.use_nvram, byte, 0);
module_param_named(excl, excl_string, charp, 0);
module_param_named(safe, safe_string, charp, 0);

MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN");
MODULE_PARM_DESC(burst, "Maximum burst.  0 to disable, 255 to read from registers");
MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
MODULE_PARM_DESC(irqm, "0 for open drain, 1 to leave alone, 2 for totem pole");
MODULE_PARM_DESC(buschk, "0 to not check, 1 for detach on error, 2 for warn on error");
MODULE_PARM_DESC(hostid, "The SCSI ID to use for the host adapters");
MODULE_PARM_DESC(verb, "0 for minimal verbosity, 1 for normal, 2 for excessive");
MODULE_PARM_DESC(debug, "Set bits to enable debugging");
MODULE_PARM_DESC(settle, "Settle delay in seconds.  Default 3");
MODULE_PARM_DESC(nvram, "Option currently not used");
MODULE_PARM_DESC(excl, "List ioport addresses here to prevent controllers from being attached");
MODULE_PARM_DESC(safe, "Set other settings to a \"safe mode\"");

MODULE_LICENSE("GPL");
MODULE_VERSION(SYM_VERSION);
MODULE_AUTHOR("Matthew Wilcox <matthew@wil.cx>");
MODULE_DESCRIPTION("NCR, Symbios and LSI 8xx and 1010 PCI SCSI adapters");

static void sym2_setup_params(void)
{
	char *p = excl_string;
	int xi = 0;

	while (p && (xi < 8)) {
		char *next_p;
		int val = (int) simple_strtoul(p, &next_p, 0);
		sym_driver_setup.excludes[xi++] = val;
		p = next_p;
	}

	if (safe_string) {
		if (*safe_string == 'y') {
			sym_driver_setup.max_tag = 0;
			sym_driver_setup.burst_order = 0;
			sym_driver_setup.scsi_led = 0;
			sym_driver_setup.scsi_diff = 1;
			sym_driver_setup.irq_mode = 0;
			sym_driver_setup.scsi_bus_check = 2;
			sym_driver_setup.host_id = 7;
			sym_driver_setup.verbose = 2;
			sym_driver_setup.settle_delay = 10;
			sym_driver_setup.use_nvram = 1;
		} else if (*safe_string != 'n') {
			printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s"
					" passed to safe option", safe_string);
		}
	}
}

/*
 * We used to try to deal with 64-bit BARs here, but don't any more.
 * There are many parts of this driver which would need to be modified
 * to handle a 64-bit base address, including scripts.  I'm uncomfortable
 * with making those changes when I have no way of testing it, so I'm
 * just going to disable it.
 *
 * Note that some machines (eg HP rx8620 and Superdome) have bus addresses
 * below 4GB and physical addresses above 4GB.  These will continue to work.
 */
static int __devinit
pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
{
	u32 tmp;
	unsigned long base;
#define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))

	pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
	base = tmp;
	if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
		pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
		if (tmp > 0)
			dev_err(&pdev->dev,
				"BAR %d is 64-bit, disabling\n", index - 1);
		base = 0;
	}

	if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
		base &= PCI_BASE_ADDRESS_IO_MASK;
	} else {
		base &= PCI_BASE_ADDRESS_MEM_MASK;
	}

	*basep = base;
	return index;
#undef PCI_BAR_OFFSET
}

static struct scsi_transport_template *sym2_transport_template = NULL;

/*
 *  Used by the eh thread to wait for command completion.
 *  It is allocated on the eh thread stack.
 */
struct sym_eh_wait {
	struct completion done;
	struct timer_list timer;
	void (*old_done)(struct scsi_cmnd *);
	int to_do;
	int timed_out;
};

/*
 *  Driver private area in the SCSI command structure.
 */
struct sym_ucmd {		/* Override the SCSI pointer structure */
	dma_addr_t data_mapping;
	u_char	data_mapped;
	struct sym_eh_wait *eh_wait;
};

#define SYM_UCMD_PTR(cmd)  ((struct sym_ucmd *)(&(cmd)->SCp))
#define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host)

static void __unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
{
	int dma_dir = cmd->sc_data_direction;

	switch(SYM_UCMD_PTR(cmd)->data_mapped) {
	case 2:
		pci_unmap_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
		break;
	case 1:
		pci_unmap_single(pdev, SYM_UCMD_PTR(cmd)->data_mapping,
				 cmd->request_bufflen, dma_dir);
		break;
	}
	SYM_UCMD_PTR(cmd)->data_mapped = 0;
}

static dma_addr_t __map_scsi_single_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
{
	dma_addr_t mapping;
	int dma_dir = cmd->sc_data_direction;

	mapping = pci_map_single(pdev, cmd->request_buffer,
				 cmd->request_bufflen, dma_dir);
	if (mapping) {
		SYM_UCMD_PTR(cmd)->data_mapped  = 1;
		SYM_UCMD_PTR(cmd)->data_mapping = mapping;
	}

	return mapping;
}

static int __map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
{
	int use_sg;
	int dma_dir = cmd->sc_data_direction;

	use_sg = pci_map_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
	if (use_sg > 0) {
		SYM_UCMD_PTR(cmd)->data_mapped  = 2;
		SYM_UCMD_PTR(cmd)->data_mapping = use_sg;
	}

	return use_sg;
}

#define unmap_scsi_data(np, cmd)	\
		__unmap_scsi_data(np->s.device, cmd)
#define map_scsi_single_data(np, cmd)	\
		__map_scsi_single_data(np->s.device, cmd)
#define map_scsi_sg_data(np, cmd)	\
		__map_scsi_sg_data(np->s.device, cmd)
/*
 *  Complete a pending CAM CCB.
 */
void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd)
{
	unmap_scsi_data(np, cmd);
	cmd->scsi_done(cmd);
}

static void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *cmd, int cam_status)
{
	sym_set_cam_status(cmd, cam_status);
	sym_xpt_done(np, cmd);
}


/*
 *  Tell the SCSI layer about a BUS RESET.
 */
void sym_xpt_async_bus_reset(struct sym_hcb *np)
{
	printf_notice("%s: SCSI BUS has been reset.\n", sym_name(np));
	np->s.settle_time = jiffies + sym_driver_setup.settle_delay * HZ;
	np->s.settle_time_valid = 1;
	if (sym_verbose >= 2)
		printf_info("%s: command processing suspended for %d seconds\n",
			    sym_name(np), sym_driver_setup.settle_delay);
}

/*
 *  Tell the SCSI layer about a BUS DEVICE RESET message sent.
 */
void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target)
{
	printf_notice("%s: TARGET %d has been reset.\n", sym_name(np), target);
}

/*
 *  Choose the more appropriate CAM status if 
 *  the IO encountered an extended error.
 */
static int sym_xerr_cam_status(int cam_status, int x_status)
{
	if (x_status) {
		if	(x_status & XE_PARITY_ERR)
			cam_status = DID_PARITY;
		else if	(x_status &(XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN))
			cam_status = DID_ERROR;
		else if	(x_status & XE_BAD_PHASE)
			cam_status = DID_ERROR;
		else
			cam_status = DID_ERROR;
	}
	return cam_status;
}

/*
 *  Build CAM result for a failed or auto-sensed IO.
 */
void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
{
	struct scsi_cmnd *cmd = cp->cmd;
	u_int cam_status, scsi_status, drv_status;

	drv_status  = 0;
	cam_status  = DID_OK;
	scsi_status = cp->ssss_status;

	if (cp->host_flags & HF_SENSE) {
		scsi_status = cp->sv_scsi_status;
		resid = cp->sv_resid;
		if (sym_verbose && cp->sv_xerr_status)
			sym_print_xerr(cmd, cp->sv_xerr_status);
		if (cp->host_status == HS_COMPLETE &&
		    cp->ssss_status == S_GOOD &&
		    cp->xerr_status == 0) {
			cam_status = sym_xerr_cam_status(DID_OK,
							 cp->sv_xerr_status);
			drv_status = DRIVER_SENSE;
			/*
			 *  Bounce back the sense data to user.
			 */
			memset(&cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
			memcpy(cmd->sense_buffer, cp->sns_bbuf,
			      min(sizeof(cmd->sense_buffer),
				  (size_t)SYM_SNS_BBUF_LEN));
#if 0
			/*
			 *  If the device reports a UNIT ATTENTION condition 
			 *  due to a RESET condition, we should consider all 
			 *  disconnect CCBs for this unit as aborted.
			 */
			if (1) {
				u_char *p;
				p  = (u_char *) cmd->sense_data;
				if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29)
					sym_clear_tasks(np, DID_ABORT,
							cp->target,cp->lun, -1);
			}
#endif
		} else {
			/*
			 * Error return from our internal request sense.  This
			 * is bad: we must clear the contingent allegiance
			 * condition otherwise the device will always return
			 * BUSY.  Use a big stick.
			 */
			sym_reset_scsi_target(np, cmd->device->id);
			cam_status = DID_ERROR;
		}
	} else if (cp->host_status == HS_COMPLETE) 	/* Bad SCSI status */
		cam_status = DID_OK;
	else if (cp->host_status == HS_SEL_TIMEOUT)	/* Selection timeout */
		cam_status = DID_NO_CONNECT;
	else if (cp->host_status == HS_UNEXPECTED)	/* Unexpected BUS FREE*/
		cam_status = DID_ERROR;
	else {						/* Extended error */
		if (sym_verbose) {
			sym_print_addr(cmd, "COMMAND FAILED (%x %x %x).\n",
				cp->host_status, cp->ssss_status,
				cp->xerr_status);
		}
		/*
		 *  Set the most appropriate value for CAM status.
		 */
		cam_status = sym_xerr_cam_status(DID_ERROR, cp->xerr_status);
	}
	cmd->resid = resid;
	cmd->result = (drv_status << 24) + (cam_status << 16) + scsi_status;
}


/*
 *  Build the scatter/gather array for an I/O.
 */

static int sym_scatter_no_sglist(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd)
{
	struct sym_tblmove *data = &cp->phys.data[SYM_CONF_MAX_SG-1];
	int segment;

	cp->data_len = cmd->request_bufflen;

	if (cmd->request_bufflen) {
		dma_addr_t baddr = map_scsi_single_data(np, cmd);
		if (baddr) {
			sym_build_sge(np, data, baddr, cmd->request_bufflen);
			segment = 1;
		} else {
			segment = -2;
		}
	} else {
		segment = 0;
	}

	return segment;
}

static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd)
{
	int segment;
	int use_sg = (int) cmd->use_sg;

	cp->data_len = 0;

	if (!use_sg)
		segment = sym_scatter_no_sglist(np, cp, cmd);
	else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
		struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
		struct sym_tblmove *data;

		if (use_sg > SYM_CONF_MAX_SG) {
			unmap_scsi_data(np, cmd);
			return -1;
		}

		data = &cp->phys.data[SYM_CONF_MAX_SG - use_sg];

		for (segment = 0; segment < use_sg; segment++) {
			dma_addr_t baddr = sg_dma_address(&scatter[segment]);
			unsigned int len = sg_dma_len(&scatter[segment]);

			sym_build_sge(np, &data[segment], baddr, len);
			cp->data_len += len;
		}
	} else {
		segment = -2;
	}

	return segment;
}

/*
 *  Queue a SCSI command.
 */
static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
{
	struct scsi_device *sdev = cmd->device;
	struct sym_tcb *tp;
	struct sym_lcb *lp;
	struct sym_ccb *cp;
	int	order;

	/*
	 *  Minimal checkings, so that we will not 
	 *  go outside our tables.
	 */
	if (sdev->id == np->myaddr ||
	    sdev->id >= SYM_CONF_MAX_TARGET ||
	    sdev->lun >= SYM_CONF_MAX_LUN) {
		sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
		return 0;
	}

	/*
	 *  Retrieve the target descriptor.
	 */
	tp = &np->target[sdev->id];

	/*
	 *  Complete the 1st INQUIRY command with error 
	 *  condition if the device is flagged NOSCAN 
	 *  at BOOT in the NVRAM. This may speed up 
	 *  the boot and maintain coherency with BIOS 
	 *  device numbering. Clearing the flag allows 
	 *  user to rescan skipped devices later.
	 *  We also return error for devices not flagged 
	 *  for SCAN LUNS in the NVRAM since some mono-lun 
	 *  devices behave badly when asked for some non 
	 *  zero LUN. Btw, this is an absolute hack.:-)
	 */
	if (cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 0x0) {
		if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
		    ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && 
		     sdev->lun != 0)) {
			tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
			sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
			return 0;
		}
	}

	/*
	 *  Select tagged/untagged.
	 */
	lp = sym_lp(tp, sdev->lun);
	order = (lp && lp->s.reqtags) ? M_SIMPLE_TAG : 0;

	/*
	 *  Queue the SCSI IO.
	 */
	cp = sym_get_ccb(np, cmd, order);
	if (!cp)
		return 1;	/* Means resource shortage */
	sym_queue_scsiio(np, cmd, cp);
	return 0;
}

/*
 *  Setup buffers and pointers that address the CDB.
 */
static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
	u32	cmd_ba;
	int	cmd_len;

	/*
	 *  CDB is 16 bytes max.
	 */
	if (cmd->cmd_len > sizeof(cp->cdb_buf)) {
		sym_set_cam_status(cp->cmd, CAM_REQ_INVALID);
		return -1;
	}

	memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
	cmd_ba  = CCB_BA (cp, cdb_buf[0]);
	cmd_len = cmd->cmd_len;

	cp->phys.cmd.addr	= cpu_to_scr(cmd_ba);
	cp->phys.cmd.size	= cpu_to_scr(cmd_len);

	return 0;
}

/*
 *  Setup pointers that address the data and start the I/O.
 */
int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
	int dir;
	struct sym_tcb *tp = &np->target[cp->target];
	struct sym_lcb *lp = sym_lp(tp, cp->lun);

	/*
	 *  Build the CDB.
	 */
	if (sym_setup_cdb(np, cmd, cp))
		goto out_abort;

	/*
	 *  No direction means no data.
	 */
	dir = cmd->sc_data_direction;
	if (dir != DMA_NONE) {
		cp->segments = sym_scatter(np, cp, cmd);
		if (cp->segments < 0) {
			if (cp->segments == -2)
				sym_set_cam_status(cmd, CAM_RESRC_UNAVAIL);
			else
				sym_set_cam_status(cmd, CAM_REQ_TOO_BIG);
			goto out_abort;
		}
	} else {
		cp->data_len = 0;
		cp->segments = 0;
	}

	/*
	 *  Set data pointers.
	 */
	sym_setup_data_pointers(np, cp, dir);

	/*
	 *  When `#ifed 1', the code below makes the driver 
	 *  panic on the first attempt to write to a SCSI device.
	 *  It is the first test we want to do after a driver 
	 *  change that does not seem obviously safe. :)
	 */
#if 0
	switch (cp->cdb_buf[0]) {
	case 0x0A: case 0x2A: case 0xAA:
		panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n");
		break;
	default:
		break;
	}
#endif

	/*
	 *	activate this job.
	 */
	if (lp)
		sym_start_next_ccbs(np, lp, 2);
	else
		sym_put_start_queue(np, cp);
	return 0;

out_abort:
	sym_free_ccb(np, cp);
	sym_xpt_done(np, cmd);
	return 0;
}


/*
 *  timer daemon.
 *
 *  Misused to keep the driver running when
 *  interrupts are not configured correctly.
 */
static void sym_timer(struct sym_hcb *np)
{
	unsigned long thistime = jiffies;

	/*
	 *  Restart the timer.
	 */
	np->s.timer.expires = thistime + SYM_CONF_TIMER_INTERVAL;
	add_timer(&np->s.timer);

	/*
	 *  If we are resetting the ncr, wait for settle_time before 
	 *  clearing it. Then command processing will be resumed.
	 */
	if (np->s.settle_time_valid) {
		if (time_before_eq(np->s.settle_time, thistime)) {
			if (sym_verbose >= 2 )
				printk("%s: command processing resumed\n",
				       sym_name(np));
			np->s.settle_time_valid = 0;
		}
		return;
	}

	/*
	 *	Nothing to do for now, but that may come.
	 */
	if (np->s.lasttime + 4*HZ < thistime) {
		np->s.lasttime = thistime;
	}

#ifdef SYM_CONF_PCIQ_MAY_MISS_COMPLETIONS
	/*
	 *  Some way-broken PCI bridges may lead to 
	 *  completions being lost when the clearing 
	 *  of the INTFLY flag by the CPU occurs 
	 *  concurrently with the chip raising this flag.
	 *  If this ever happen, lost completions will 
	 * be reaped here.
	 */
	sym_wakeup_done(np);
#endif
}


/*
 *  PCI BUS error handler.
 */
void sym_log_bus_error(struct sym_hcb *np)
{
	u_short pci_sts;
	pci_read_config_word(np->s.device, PCI_STATUS, &pci_sts);
	if (pci_sts & 0xf900) {
		pci_write_config_word(np->s.device, PCI_STATUS, pci_sts);
		printf("%s: PCI STATUS = 0x%04x\n",
			sym_name(np), pci_sts & 0xf900);
	}
}

/*
 * queuecommand method.  Entered with the host adapter lock held and
 * interrupts disabled.
 */
static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
					void (*done)(struct scsi_cmnd *))
{
	struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
	struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd);
	int sts = 0;

	cmd->scsi_done     = done;
	memset(ucp, 0, sizeof(*ucp));

	/*
	 *  Shorten our settle_time if needed for 
	 *  this command not to time out.
	 */
	if (np->s.settle_time_valid && cmd->timeout_per_command) {
		unsigned long tlimit = jiffies + cmd->timeout_per_command;
		tlimit -= SYM_CONF_TIMER_INTERVAL*2;
		if (time_after(np->s.settle_time, tlimit)) {
			np->s.settle_time = tlimit;
		}
	}

	if (np->s.settle_time_valid)
		return SCSI_MLQUEUE_HOST_BUSY;

	sts = sym_queue_command(np, cmd);
	if (sts)
		return SCSI_MLQUEUE_HOST_BUSY;
	return 0;
}

/*
 *  Linux entry point of the interrupt handler.
 */
static irqreturn_t sym53c8xx_intr(int irq, void *dev_id, struct pt_regs * regs)
{
	unsigned long flags;
	struct sym_hcb *np = (struct sym_hcb *)dev_id;

	if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[");

	spin_lock_irqsave(np->s.host->host_lock, flags);
	sym_interrupt(np);
	spin_unlock_irqrestore(np->s.host->host_lock, flags);

	if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n");

	return IRQ_HANDLED;
}

/*
 *  Linux entry point of the timer handler
 */
static void sym53c8xx_timer(unsigned long npref)
{
	struct sym_hcb *np = (struct sym_hcb *)npref;
	unsigned long flags;

	spin_lock_irqsave(np->s.host->host_lock, flags);
	sym_timer(np);
	spin_unlock_irqrestore(np->s.host->host_lock, flags);
}


/*
 *  What the eh thread wants us to perform.
 */
#define SYM_EH_ABORT		0
#define SYM_EH_DEVICE_RESET	1
#define SYM_EH_BUS_RESET	2
#define SYM_EH_HOST_RESET	3

/*
 *  What we will do regarding the involved SCSI command.
 */
#define SYM_EH_DO_IGNORE	0
#define SYM_EH_DO_COMPLETE	1
#define SYM_EH_DO_WAIT		2

/*
 *  Our general completion handler.
 */
static void __sym_eh_done(struct scsi_cmnd *cmd, int timed_out)
{
	struct sym_eh_wait *ep = SYM_UCMD_PTR(cmd)->eh_wait;
	if (!ep)
		return;

	/* Try to avoid a race here (not 100% safe) */
	if (!timed_out) {
		ep->timed_out = 0;
		if (ep->to_do == SYM_EH_DO_WAIT && !del_timer(&ep->timer))
			return;
	}

	/* Revert everything */
	SYM_UCMD_PTR(cmd)->eh_wait = NULL;
	cmd->scsi_done = ep->old_done;

	/* Wake up the eh thread if it wants to sleep */
	if (ep->to_do == SYM_EH_DO_WAIT)
		complete(&ep->done);
}

/*
 *  scsi_done() alias when error recovery is in progress. 
 */
static void sym_eh_done(struct scsi_cmnd *cmd) { __sym_eh_done(cmd, 0); }

/*
 *  Some timeout handler to avoid waiting too long.
 */
static void sym_eh_timeout(u_long p) { __sym_eh_done((struct scsi_cmnd *)p, 1); }

/*
 *  Generic method for our eh processing.
 *  The 'op' argument tells what we have to do.
 */
static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
{
	struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
	SYM_QUEHEAD *qp;
	int to_do = SYM_EH_DO_IGNORE;
	int sts = -1;
	struct sym_eh_wait eh, *ep = &eh;

	dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);

	/* This one is queued in some place -> to wait for completion */
	FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
		struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
		if (cp->cmd == cmd) {
			to_do = SYM_EH_DO_WAIT;
			goto prepare;
		}
	}

prepare:
	/* Prepare stuff to either ignore, complete or wait for completion */
	switch(to_do) {
	default:
	case SYM_EH_DO_IGNORE:
		break;
	case SYM_EH_DO_WAIT:
		init_completion(&ep->done);
		/* fall through */
	case SYM_EH_DO_COMPLETE:
		ep->old_done = cmd->scsi_done;
		cmd->scsi_done = sym_eh_done;
		SYM_UCMD_PTR(cmd)->eh_wait = ep;
	}

	/* Try to proceed the operation we have been asked for */
	sts = -1;
	switch(op) {
	case SYM_EH_ABORT:
		sts = sym_abort_scsiio(np, cmd, 1);
		break;
	case SYM_EH_DEVICE_RESET:
		sts = sym_reset_scsi_target(np, cmd->device->id);
		break;
	case SYM_EH_BUS_RESET:
		sym_reset_scsi_bus(np, 1);
		sts = 0;
		break;
	case SYM_EH_HOST_RESET:
		sym_reset_scsi_bus(np, 0);
		sym_start_up (np, 1);
		sts = 0;
		break;
	default:
		break;
	}

	/* On error, restore everything and cross fingers :) */
	if (sts) {
		SYM_UCMD_PTR(cmd)->eh_wait = NULL;
		cmd->scsi_done = ep->old_done;
		to_do = SYM_EH_DO_IGNORE;
	}

	ep->to_do = to_do;
	/* Complete the command with locks held as required by the driver */
	if (to_do == SYM_EH_DO_COMPLETE)
		sym_xpt_done2(np, cmd, CAM_REQ_ABORTED);

	/* Wait for completion with locks released, as required by kernel */
	if (to_do == SYM_EH_DO_WAIT) {
		init_timer(&ep->timer);
		ep->timer.expires = jiffies + (5*HZ);
		ep->timer.function = sym_eh_timeout;
		ep->timer.data = (u_long)cmd;
		ep->timed_out = 1;	/* Be pessimistic for once :) */
		add_timer(&ep->timer);
		spin_unlock_irq(np->s.host->host_lock);
		wait_for_completion(&ep->done);
		spin_lock_irq(np->s.host->host_lock);
		if (ep->timed_out)
			sts = -2;
	}
	dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname,
			sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed");
	return sts ? SCSI_FAILED : SCSI_SUCCESS;
}


/*
 * Error handlers called from the eh thread (one thread per HBA).
 */
static int sym53c8xx_eh_abort_handler(struct scsi_cmnd *cmd)
{
	return sym_eh_handler(SYM_EH_ABORT, "ABORT", cmd);
}

static int sym53c8xx_eh_device_reset_handler(struct scsi_cmnd *cmd)
{
	return sym_eh_handler(SYM_EH_DEVICE_RESET, "DEVICE RESET", cmd);
}

static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
{
	return sym_eh_handler(SYM_EH_BUS_RESET, "BUS RESET", cmd);
}

static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
{
	return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
}

/*
 *  Tune device queuing depth, according to various limits.
 */
static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
{
	struct sym_lcb *lp = sym_lp(tp, lun);
	u_short	oldtags;

	if (!lp)
		return;

	oldtags = lp->s.reqtags;

	if (reqtags > lp->s.scdev_depth)
		reqtags = lp->s.scdev_depth;

	lp->started_limit = reqtags ? reqtags : 2;
	lp->started_max   = 1;
	lp->s.reqtags     = reqtags;

	if (reqtags != oldtags) {
		dev_info(&tp->sdev->sdev_target->dev,
		         "tagged command queuing %s, command queue depth %d.\n",
		          lp->s.reqtags ? "enabled" : "disabled",
 		          lp->started_limit);
	}
}

/*
 *  Linux select queue depths function
 */
#define DEF_DEPTH	(sym_driver_setup.max_tag)
#define ALL_TARGETS	-2
#define NO_TARGET	-1
#define ALL_LUNS	-2
#define NO_LUN		-1

static int device_queue_depth(struct sym_hcb *np, int target, int lun)
{
	int c, h, t, u, v;
	char *p = sym_driver_setup.tag_ctrl;
	char *ep;

	h = -1;
	t = NO_TARGET;
	u = NO_LUN;
	while ((c = *p++) != 0) {
		v = simple_strtoul(p, &ep, 0);
		switch(c) {
		case '/':
			++h;
			t = ALL_TARGETS;
			u = ALL_LUNS;
			break;
		case 't':
			if (t != target)
				t = (target == v) ? v : NO_TARGET;
			u = ALL_LUNS;
			break;
		case 'u':
			if (u != lun)
				u = (lun == v) ? v : NO_LUN;
			break;
		case 'q':
			if (h == np->s.unit &&
				(t == ALL_TARGETS || t == target) &&
				(u == ALL_LUNS    || u == lun))
				return v;
			break;
		case '-':
			t = ALL_TARGETS;
			u = ALL_LUNS;
			break;
		default:
			break;
		}
		p = ep;
	}
	return DEF_DEPTH;
}

static int sym53c8xx_slave_alloc(struct scsi_device *device)
{
	struct sym_hcb *np = sym_get_hcb(device->host);
	struct sym_tcb *tp = &np->target[device->id];
	if (!tp->sdev)
		tp->sdev = device;

	return 0;
}

static void sym53c8xx_slave_destroy(struct scsi_device *device)
{
	struct sym_hcb *np = sym_get_hcb(device->host);
	struct sym_tcb *tp = &np->target[device->id];
	if (tp->sdev == device)
		tp->sdev = NULL;
}

/*
 * Linux entry point for device queue sizing.
 */
static int sym53c8xx_slave_configure(struct scsi_device *device)
{
	struct sym_hcb *np = sym_get_hcb(device->host);
	struct sym_tcb *tp = &np->target[device->id];
	struct sym_lcb *lp;
	int reqtags, depth_to_use;

	/*
	 *  Allocate the LCB if not yet.
	 *  If it fail, we may well be in the sh*t. :)
	 */
	lp = sym_alloc_lcb(np, device->id, device->lun);
	if (!lp)
		return -ENOMEM;

	/*
	 *  Get user flags.
	 */
	lp->curr_flags = lp->user_flags;

	/*
	 *  Select queue depth from driver setup.
	 *  Donnot use more than configured by user.
	 *  Use at least 2.
	 *  Donnot use more than our maximum.
	 */
	reqtags = device_queue_depth(np, device->id, device->lun);
	if (reqtags > tp->usrtags)
		reqtags = tp->usrtags;
	if (!device->tagged_supported)
		reqtags = 0;
#if 1 /* Avoid to locally queue commands for no good reasons */
	if (reqtags > SYM_CONF_MAX_TAG)
		reqtags = SYM_CONF_MAX_TAG;
	depth_to_use = (reqtags ? reqtags : 2);
#else
	depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2);
#endif
	scsi_adjust_queue_depth(device,
				(device->tagged_supported ?
				 MSG_SIMPLE_TAG : 0),
				depth_to_use);
	lp->s.scdev_depth = depth_to_use;
	sym_tune_dev_queuing(tp, device->lun, reqtags);

	if (!spi_initial_dv(device->sdev_target))
		spi_dv_device(device);

	return 0;
}

/*
 *  Linux entry point for info() function
 */
static const char *sym53c8xx_info (struct Scsi_Host *host)
{
	return SYM_DRIVER_NAME;
}


#ifdef SYM_LINUX_PROC_INFO_SUPPORT
/*
 *  Proc file system stuff
 *
 *  A read operation returns adapter information.
 *  A write operation is a control command.
 *  The string is parsed in the driver code and the command is passed 
 *  to the sym_usercmd() function.
 */

#ifdef SYM_LINUX_USER_COMMAND_SUPPORT

struct	sym_usrcmd {
	u_long	target;
	u_long	lun;
	u_long	data;
	u_long	cmd;
};

#define UC_SETSYNC      10
#define UC_SETTAGS	11
#define UC_SETDEBUG	12
#define UC_SETWIDE	14
#define UC_SETFLAG	15
#define UC_SETVERBOSE	17
#define UC_RESETDEV	18
#define UC_CLEARDEV	19

static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc)
{
	struct sym_tcb *tp;
	int t, l;

	switch (uc->cmd) {
	case 0: return;

#ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
	case UC_SETDEBUG:
		sym_debug_flags = uc->data;
		break;
#endif
	case UC_SETVERBOSE:
		np->verbose = uc->data;
		break;
	default:
		/*
		 * We assume that other commands apply to targets.
		 * This should always be the case and avoid the below 
		 * 4 lines to be repeated 6 times.
		 */
		for (t = 0; t < SYM_CONF_MAX_TARGET; t++) {
			if (!((uc->target >> t) & 1))
				continue;
			tp = &np->target[t];

			switch (uc->cmd) {

			case UC_SETSYNC:
				if (!uc->data || uc->data >= 255) {
					tp->tgoal.iu = tp->tgoal.dt =
						tp->tgoal.qas = 0;
					tp->tgoal.offset = 0;
				} else if (uc->data <= 9 && np->minsync_dt) {
					if (uc->data < np->minsync_dt)
						uc->data = np->minsync_dt;
					tp->tgoal.iu = tp->tgoal.dt =
						tp->tgoal.qas = 1;
					tp->tgoal.width = 1;
					tp->tgoal.period = uc->data;
					tp->tgoal.offset = np->maxoffs_dt;
				} else {
					if (uc->data < np->minsync)
						uc->data = np->minsync;
					tp->tgoal.iu = tp->tgoal.dt =
						tp->tgoal.qas = 0;
					tp->tgoal.period = uc->data;
					tp->tgoal.offset = np->maxoffs;
				}
				tp->tgoal.check_nego = 1;
				break;
			case UC_SETWIDE:
				tp->tgoal.width = uc->data ? 1 : 0;
				tp->tgoal.check_nego = 1;
				break;
			case UC_SETTAGS:
				for (l = 0; l < SYM_CONF_MAX_LUN; l++)
					sym_tune_dev_queuing(tp, l, uc->data);
				break;
			case UC_RESETDEV:
				tp->to_reset = 1;
				np->istat_sem = SEM;
				OUTB(np, nc_istat, SIGP|SEM);
				break;
			case UC_CLEARDEV:
				for (l = 0; l < SYM_CONF_MAX_LUN; l++) {
					struct sym_lcb *lp = sym_lp(tp, l);
					if (lp) lp->to_clear = 1;
				}
				np->istat_sem = SEM;
				OUTB(np, nc_istat, SIGP|SEM);
				break;
			case UC_SETFLAG:
				tp->usrflags = uc->data;
				break;
			}
		}
		break;
	}
}

static int skip_spaces(char *ptr, int len)
{
	int cnt, c;

	for (cnt = len; cnt > 0 && (c = *ptr++) && isspace(c); cnt--);

	return (len - cnt);
}

static int get_int_arg(char *ptr, int len, u_long *pv)
{
	char *end;

	*pv = simple_strtoul(ptr, &end, 10);
	return (end - ptr);
}

static int is_keyword(char *ptr, int len, char *verb)
{
	int verb_len = strlen(verb);

	if (len >= verb_len && !memcmp(verb, ptr, verb_len))
		return verb_len;
	else
		return 0;
}

#define SKIP_SPACES(ptr, len)						\
	if ((arg_len = skip_spaces(ptr, len)) < 1)			\
		return -EINVAL;						\
	ptr += arg_len; len -= arg_len;

#define GET_INT_ARG(ptr, len, v)					\
	if (!(arg_len = get_int_arg(ptr, len, &(v))))			\
		return -EINVAL;						\
	ptr += arg_len; len -= arg_len;


/*
 * Parse a control command
 */

static int sym_user_command(struct sym_hcb *np, char *buffer, int length)
{
	char *ptr	= buffer;
	int len		= length;
	struct sym_usrcmd cmd, *uc = &cmd;
	int		arg_len;
	u_long 		target;

	memset(uc, 0, sizeof(*uc));

	if (len > 0 && ptr[len-1] == '\n')
		--len;

	if	((arg_len = is_keyword(ptr, len, "setsync")) != 0)
		uc->cmd = UC_SETSYNC;
	else if	((arg_len = is_keyword(ptr, len, "settags")) != 0)
		uc->cmd = UC_SETTAGS;
	else if	((arg_len = is_keyword(ptr, len, "setverbose")) != 0)
		uc->cmd = UC_SETVERBOSE;
	else if	((arg_len = is_keyword(ptr, len, "setwide")) != 0)
		uc->cmd = UC_SETWIDE;
#ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
	else if	((arg_len = is_keyword(ptr, len, "setdebug")) != 0)
		uc->cmd = UC_SETDEBUG;
#endif
	else if	((arg_len = is_keyword(ptr, len, "setflag")) != 0)
		uc->cmd = UC_SETFLAG;
	else if	((arg_len = is_keyword(ptr, len, "resetdev")) != 0)
		uc->cmd = UC_RESETDEV;
	else if	((arg_len = is_keyword(ptr, len, "cleardev")) != 0)
		uc->cmd = UC_CLEARDEV;
	else
		arg_len = 0;

#ifdef DEBUG_PROC_INFO
printk("sym_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
#endif

	if (!arg_len)
		return -EINVAL;
	ptr += arg_len; len -= arg_len;

	switch(uc->cmd) {
	case UC_SETSYNC:
	case UC_SETTAGS:
	case UC_SETWIDE:
	case UC_SETFLAG:
	case UC_RESETDEV:
	case UC_CLEARDEV:
		SKIP_SPACES(ptr, len);
		if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
			ptr += arg_len; len -= arg_len;
			uc->target = ~0;
		} else {
			GET_INT_ARG(ptr, len, target);
			uc->target = (1<<target);
#ifdef DEBUG_PROC_INFO
printk("sym_user_command: target=%ld\n", target);
#endif
		}
		break;
	}

	switch(uc->cmd) {
	case UC_SETVERBOSE:
	case UC_SETSYNC:
	case UC_SETTAGS:
	case UC_SETWIDE:
		SKIP_SPACES(ptr, len);
		GET_INT_ARG(ptr, len, uc->data);
#ifdef DEBUG_PROC_INFO
printk("sym_user_command: data=%ld\n", uc->data);
#endif
		break;
#ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
	case UC_SETDEBUG:
		while (len > 0) {
			SKIP_SPACES(ptr, len);
			if	((arg_len = is_keyword(ptr, len, "alloc")))
				uc->data |= DEBUG_ALLOC;
			else if	((arg_len = is_keyword(ptr, len, "phase")))
				uc->data |= DEBUG_PHASE;
			else if	((arg_len = is_keyword(ptr, len, "queue")))
				uc->data |= DEBUG_QUEUE;
			else if	((arg_len = is_keyword(ptr, len, "result")))
				uc->data |= DEBUG_RESULT;
			else if	((arg_len = is_keyword(ptr, len, "scatter")))
				uc->data |= DEBUG_SCATTER;
			else if	((arg_len = is_keyword(ptr, len, "script")))
				uc->data |= DEBUG_SCRIPT;
			else if	((arg_len = is_keyword(ptr, len, "tiny")))
				uc->data |= DEBUG_TINY;
			else if	((arg_len = is_keyword(ptr, len, "timing")))
				uc->data |= DEBUG_TIMING;
			else if	((arg_len = is_keyword(ptr, len, "nego")))
				uc->data |= DEBUG_NEGO;
			else if	((arg_len = is_keyword(ptr, len, "tags")))
				uc->data |= DEBUG_TAGS;
			else if	((arg_len = is_keyword(ptr, len, "pointer")))
				uc->data |= DEBUG_POINTER;
			else
				return -EINVAL;
			ptr += arg_len; len -= arg_len;
		}
#ifdef DEBUG_PROC_INFO
printk("sym_user_command: data=%ld\n", uc->data);
#endif
		break;
#endif /* SYM_LINUX_DEBUG_CONTROL_SUPPORT */
	case UC_SETFLAG:
		while (len > 0) {
			SKIP_SPACES(ptr, len);
			if	((arg_len = is_keyword(ptr, len, "no_disc")))
				uc->data &= ~SYM_DISC_ENABLED;
			else
				return -EINVAL;
			ptr += arg_len; len -= arg_len;
		}
		break;
	default:
		break;
	}

	if (len)
		return -EINVAL;
	else {
		unsigned long flags;

		spin_lock_irqsave(np->s.host->host_lock, flags);
		sym_exec_user_command (np, uc);
		spin_unlock_irqrestore(np->s.host->host_lock, flags);
	}
	return length;
}

#endif	/* SYM_LINUX_USER_COMMAND_SUPPORT */


#ifdef SYM_LINUX_USER_INFO_SUPPORT
/*
 *  Informations through the proc file system.
 */
struct info_str {
	char *buffer;
	int length;
	int offset;
	int pos;
};

static void copy_mem_info(struct info_str *info, char *data, int len)
{
	if (info->pos + len > info->length)
		len = info->length - info->pos;

	if (info->pos + len < info->offset) {
		info->pos += len;
		return;
	}
	if (info->pos < info->offset) {
		data += (info->offset - info->pos);
		len  -= (info->offset - info->pos);
	}

	if (len > 0) {
		memcpy(info->buffer + info->pos, data, len);
		info->pos += len;
	}
}

static int copy_info(struct info_str *info, char *fmt, ...)
{
	va_list args;
	char buf[81];
	int len;

	va_start(args, fmt);
	len = vsprintf(buf, fmt, args);
	va_end(args);

	copy_mem_info(info, buf, len);
	return len;
}

/*
 *  Copy formatted information into the input buffer.
 */
static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
{
	struct info_str info;

	info.buffer	= ptr;
	info.length	= len;
	info.offset	= offset;
	info.pos	= 0;

	copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
			 "revision id 0x%x\n",
			 np->s.chip_name, np->device_id, np->revision_id);
	copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
		pci_name(np->s.device), IRQ_PRM(np->s.irq));
	copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
			 (int) (np->minsync_dt ? np->minsync_dt : np->minsync),
			 np->maxwide ? "Wide" : "Narrow",
			 np->minsync_dt ? ", DT capable" : "");

	copy_info(&info, "Max. started commands %d, "
			 "max. commands per LUN %d\n",
			 SYM_CONF_MAX_START, SYM_CONF_MAX_TAG);

	return info.pos > info.offset? info.pos - info.offset : 0;
}
#endif /* SYM_LINUX_USER_INFO_SUPPORT */

/*
 *  Entry point of the scsi proc fs of the driver.
 *  - func = 0 means read  (returns adapter infos)
 *  - func = 1 means write (not yet merget from sym53c8xx)
 */
static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer,
			char **start, off_t offset, int length, int func)
{
	struct sym_hcb *np = sym_get_hcb(host);
	int retv;

	if (func) {
#ifdef	SYM_LINUX_USER_COMMAND_SUPPORT
		retv = sym_user_command(np, buffer, length);
#else
		retv = -EINVAL;
#endif
	} else {
		if (start)
			*start = buffer;
#ifdef SYM_LINUX_USER_INFO_SUPPORT
		retv = sym_host_info(np, buffer, offset, length);
#else
		retv = -EINVAL;
#endif
	}

	return retv;
}
#endif /* SYM_LINUX_PROC_INFO_SUPPORT */

/*
 *	Free controller resources.
 */
static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev)
{
	/*
	 *  Free O/S specific resources.
	 */
	if (np->s.irq)
		free_irq(np->s.irq, np);
	if (np->s.ioaddr)
		pci_iounmap(pdev, np->s.ioaddr);
	if (np->s.ramaddr)
		pci_iounmap(pdev, np->s.ramaddr);
	/*
	 *  Free O/S independent resources.
	 */
	sym_hcb_free(np);

	sym_mfree_dma(np, sizeof(*np), "HCB");
}

/*
 *  Ask/tell the system about DMA addressing.
 */
static int sym_setup_bus_dma_mask(struct sym_hcb *np)
{
#if SYM_CONF_DMA_ADDRESSING_MODE > 0
#if   SYM_CONF_DMA_ADDRESSING_MODE == 1
#define	DMA_DAC_MASK	0x000000ffffffffffULL /* 40-bit */
#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
#define	DMA_DAC_MASK	DMA_64BIT_MASK
#endif
	if ((np->features & FE_DAC) &&
			!pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) {
		np->use_dac = 1;
		return 0;
	}
#endif

	if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK))
		return 0;

	printf_warning("%s: No suitable DMA available\n", sym_name(np));
	return -1;
}

/*
 *  Host attach and initialisations.
 *
 *  Allocate host data and ncb structure.
 *  Remap MMIO region.
 *  Do chip initialization.
 *  If all is OK, install interrupt handling and
 *  start the timer daemon.
 */
static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
		int unit, struct sym_device *dev)
{
	struct host_data *host_data;
	struct sym_hcb *np = NULL;
	struct Scsi_Host *instance = NULL;
	struct pci_dev *pdev = dev->pdev;
	unsigned long flags;
	struct sym_fw *fw;

	printk(KERN_INFO
		"sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
		unit, dev->chip.name, dev->chip.revision_id,
		pci_name(pdev), IRQ_PRM(pdev->irq));

	/*
	 *  Get the firmware for this chip.
	 */
	fw = sym_find_firmware(&dev->chip);
	if (!fw)
		goto attach_failed;

	/*
	 *	Allocate host_data structure
	 */
	instance = scsi_host_alloc(tpnt, sizeof(*host_data));
	if (!instance)
		goto attach_failed;
	host_data = (struct host_data *) instance->hostdata;

	/*
	 *  Allocate immediately the host control block, 
	 *  since we are only expecting to succeed. :)
	 *  We keep track in the HCB of all the resources that 
	 *  are to be released on error.
	 */
	np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB");
	if (!np)
		goto attach_failed;
	np->s.device = pdev;
	np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */
	host_data->ncb = np;
	np->s.host = instance;

	pci_set_drvdata(pdev, np);

	/*
	 *  Copy some useful infos to the HCB.
	 */
	np->hcb_ba	= vtobus(np);
	np->verbose	= sym_driver_setup.verbose;
	np->s.device	= pdev;
	np->s.unit	= unit;
	np->device_id	= dev->chip.device_id;
	np->revision_id	= dev->chip.revision_id;
	np->features	= dev->chip.features;
	np->clock_divn	= dev->chip.nr_divisor;
	np->maxoffs	= dev->chip.offset_max;
	np->maxburst	= dev->chip.burst_max;
	np->myaddr	= dev->host_id;

	/*
	 *  Edit its name.
	 */
	strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name));
	sprintf(np->s.inst_name, "sym%d", np->s.unit);

	if (sym_setup_bus_dma_mask(np))
		goto attach_failed;

	/*
	 *  Try to map the controller chip to
	 *  virtual and physical memory.
	 */
	np->mmio_ba = (u32)dev->mmio_base;
	np->s.ioaddr	= dev->s.ioaddr;
	np->s.ramaddr	= dev->s.ramaddr;
	np->s.io_ws = (np->features & FE_IO256) ? 256 : 128;

	/*
	 *  Map on-chip RAM if present and supported.
	 */
	if (!(np->features & FE_RAM))
		dev->ram_base = 0;
	if (dev->ram_base) {
		np->ram_ba = (u32)dev->ram_base;
		np->ram_ws = (np->features & FE_RAM8K) ? 8192 : 4096;
	}

	if (sym_hcb_attach(instance, fw, dev->nvram))
		goto attach_failed;

	/*
	 *  Install the interrupt handler.
	 *  If we synchonize the C code with SCRIPTS on interrupt, 
	 *  we do not want to share the INTR line at all.
	 */
	if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) {
		printf_err("%s: request irq %d failure\n",
			sym_name(np), pdev->irq);
		goto attach_failed;
	}
	np->s.irq = pdev->irq;

	/*
	 *  After SCSI devices have been opened, we cannot
	 *  reset the bus safely, so we do it here.
	 */
	spin_lock_irqsave(instance->host_lock, flags);
	if (sym_reset_scsi_bus(np, 0))
		goto reset_failed;

	/*
	 *  Start the SCRIPTS.
	 */
	sym_start_up (np, 1);

	/*
	 *  Start the timer daemon
	 */
	init_timer(&np->s.timer);
	np->s.timer.data     = (unsigned long) np;
	np->s.timer.function = sym53c8xx_timer;
	np->s.lasttime=0;
	sym_timer (np);

	/*
	 *  Fill Linux host instance structure
	 *  and return success.
	 */
	instance->max_channel	= 0;
	instance->this_id	= np->myaddr;
	instance->max_id	= np->maxwide ? 16 : 8;
	instance->max_lun	= SYM_CONF_MAX_LUN;
	instance->unique_id	= pci_resource_start(pdev, 0);
	instance->cmd_per_lun	= SYM_CONF_MAX_TAG;
	instance->can_queue	= (SYM_CONF_MAX_START-2);
	instance->sg_tablesize	= SYM_CONF_MAX_SG;
	instance->max_cmd_len	= 16;
	BUG_ON(sym2_transport_template == NULL);
	instance->transportt	= sym2_transport_template;

	spin_unlock_irqrestore(instance->host_lock, flags);

	return instance;

 reset_failed:
	printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, "
		   "TERMINATION, DEVICE POWER etc.!\n", sym_name(np));
	spin_unlock_irqrestore(instance->host_lock, flags);
 attach_failed:
	if (!instance)
		return NULL;
	printf_info("%s: giving up ...\n", sym_name(np));
	if (np)
		sym_free_resources(np, pdev);
	scsi_host_put(instance);

	return NULL;
 }


/*
 *    Detect and try to read SYMBIOS and TEKRAM NVRAM.
 */
#if SYM_CONF_NVRAM_SUPPORT
static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
{
	devp->nvram = nvp;
	devp->device_id = devp->chip.device_id;
	nvp->type = 0;

	sym_read_nvram(devp, nvp);
}
#else
static inline void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
{
}
#endif	/* SYM_CONF_NVRAM_SUPPORT */

static int __devinit sym_check_supported(struct sym_device *device)
{
	struct sym_chip *chip;
	struct pci_dev *pdev = device->pdev;
	u_char revision;
	unsigned long io_port = pci_resource_start(pdev, 0);
	int i;

	/*
	 *  If user excluded this chip, do not initialize it.
	 *  I hate this code so much.  Must kill it.
	 */
	if (io_port) {
		for (i = 0 ; i < 8 ; i++) {
			if (sym_driver_setup.excludes[i] == io_port)
				return -ENODEV;
		}
	}

	/*
	 * Check if the chip is supported.  Then copy the chip description
	 * to our device structure so we can make it match the actual device
	 * and options.
	 */
	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
	chip = sym_lookup_chip_table(pdev->device, revision);
	if (!chip) {
		dev_info(&pdev->dev, "device not supported\n");
		return -ENODEV;
	}
	memcpy(&device->chip, chip, sizeof(device->chip));
	device->chip.revision_id = revision;

	return 0;
}

/*
 * Ignore Symbios chips controlled by various RAID controllers.
 * These controllers set value 0x52414944 at RAM end - 16.
 */
static int __devinit sym_check_raid(struct sym_device *device)
{
	unsigned int ram_size, ram_val;

	if (!device->s.ramaddr)
		return 0;

	if (device->chip.features & FE_RAM8K)
		ram_size = 8192;
	else
		ram_size = 4096;

	ram_val = readl(device->s.ramaddr + ram_size - 16);
	if (ram_val != 0x52414944)
		return 0;

	dev_info(&device->pdev->dev,
			"not initializing, driven by RAID controller.\n");
	return -ENODEV;
}

static int __devinit sym_set_workarounds(struct sym_device *device)
{
	struct sym_chip *chip = &device->chip;
	struct pci_dev *pdev = device->pdev;
	u_short status_reg;

	/*
	 *  (ITEM 12 of a DEL about the 896 I haven't yet).
	 *  We must ensure the chip will use WRITE AND INVALIDATE.
	 *  The revision number limit is for now arbitrary.
	 */
	if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
		chip->features	|= (FE_WRIE | FE_CLSE);
	}

	/* If the chip can do Memory Write Invalidate, enable it */
	if (chip->features & FE_WRIE) {
		if (pci_set_mwi(pdev))
			return -ENODEV;
	}

	/*
	 *  Work around for errant bit in 895A. The 66Mhz
	 *  capable bit is set erroneously. Clear this bit.
	 *  (Item 1 DEL 533)
	 *
	 *  Make sure Config space and Features agree.
	 *
	 *  Recall: writes are not normal to status register -
	 *  write a 1 to clear and a 0 to leave unchanged.
	 *  Can only reset bits.
	 */
	pci_read_config_word(pdev, PCI_STATUS, &status_reg);
	if (chip->features & FE_66MHZ) {
		if (!(status_reg & PCI_STATUS_66MHZ))
			chip->features &= ~FE_66MHZ;
	} else {
		if (status_reg & PCI_STATUS_66MHZ) {
			status_reg = PCI_STATUS_66MHZ;
			pci_write_config_word(pdev, PCI_STATUS, status_reg);
			pci_read_config_word(pdev, PCI_STATUS, &status_reg);
		}
	}

	return 0;
}

/*
 *  Read and check the PCI configuration for any detected NCR 
 *  boards and save data for attaching after all boards have 
 *  been detected.
 */
static void __devinit
sym_init_device(struct pci_dev *pdev, struct sym_device *device)
{
	int i;

	device->host_id = SYM_SETUP_HOST_ID;
	device->pdev = pdev;

	i = pci_get_base_address(pdev, 1, &device->mmio_base);
	pci_get_base_address(pdev, i, &device->ram_base);

#ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
	if (device->mmio_base)
		device->s.ioaddr = pci_iomap(pdev, 1,
						pci_resource_len(pdev, 1));
#endif
	if (!device->s.ioaddr)
		device->s.ioaddr = pci_iomap(pdev, 0,
						pci_resource_len(pdev, 0));
	if (device->ram_base)
		device->s.ramaddr = pci_iomap(pdev, i,
						pci_resource_len(pdev, i));
}

/*
 * The NCR PQS and PDS cards are constructed as a DEC bridge
 * behind which sits a proprietary NCR memory controller and
 * either four or two 53c875s as separate devices.  We can tell
 * if an 875 is part of a PQS/PDS or not since if it is, it will
 * be on the same bus as the memory controller.  In its usual
 * mode of operation, the 875s are slaved to the memory
 * controller for all transfers.  To operate with the Linux
 * driver, the memory controller is disabled and the 875s
 * freed to function independently.  The only wrinkle is that
 * the preset SCSI ID (which may be zero) must be read in from
 * a special configuration space register of the 875.
 */
static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev)
{
	int slot;
	u8 tmp;

	for (slot = 0; slot < 256; slot++) {
		struct pci_dev *memc = pci_get_slot(pdev->bus, slot);

		if (!memc || memc->vendor != 0x101a || memc->device == 0x0009) {
			pci_dev_put(memc);
			continue;
		}

		/* bit 1: allow individual 875 configuration */
		pci_read_config_byte(memc, 0x44, &tmp);
		if ((tmp & 0x2) == 0) {
			tmp |= 0x2;
			pci_write_config_byte(memc, 0x44, tmp);
		}

		/* bit 2: drive individual 875 interrupts to the bus */
		pci_read_config_byte(memc, 0x45, &tmp);
		if ((tmp & 0x4) == 0) {
			tmp |= 0x4;
			pci_write_config_byte(memc, 0x45, tmp);
		}

		pci_dev_put(memc);
		break;
	}

	pci_read_config_byte(pdev, 0x84, &tmp);
	sym_dev->host_id = tmp;
}

/*
 *  Called before unloading the module.
 *  Detach the host.
 *  We have to free resources and halt the NCR chip.
 */
static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev)
{
	printk("%s: detaching ...\n", sym_name(np));

	del_timer_sync(&np->s.timer);

	/*
	 * Reset NCR chip.
	 * We should use sym_soft_reset(), but we don't want to do 
	 * so, since we may not be safe if interrupts occur.
	 */
	printk("%s: resetting chip\n", sym_name(np));
	OUTB(np, nc_istat, SRST);
	udelay(10);
	OUTB(np, nc_istat, 0);

	sym_free_resources(np, pdev);

	return 1;
}

/*
 * Driver host template.
 */
static struct scsi_host_template sym2_template = {
	.module			= THIS_MODULE,
	.name			= "sym53c8xx",
	.info			= sym53c8xx_info, 
	.queuecommand		= sym53c8xx_queue_command,
	.slave_alloc		= sym53c8xx_slave_alloc,
	.slave_configure	= sym53c8xx_slave_configure,
	.slave_destroy		= sym53c8xx_slave_destroy,
	.eh_abort_handler	= sym53c8xx_eh_abort_handler,
	.eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
	.eh_bus_reset_handler	= sym53c8xx_eh_bus_reset_handler,
	.eh_host_reset_handler	= sym53c8xx_eh_host_reset_handler,
	.this_id		= 7,
	.use_clustering		= DISABLE_CLUSTERING,
#ifdef SYM_LINUX_PROC_INFO_SUPPORT
	.proc_info		= sym53c8xx_proc_info,
	.proc_name		= NAME53C8XX,
#endif
};

static int attach_count;

static int __devinit sym2_probe(struct pci_dev *pdev,
				const struct pci_device_id *ent)
{
	struct sym_device sym_dev;
	struct sym_nvram nvram;
	struct Scsi_Host *instance;

	memset(&sym_dev, 0, sizeof(sym_dev));
	memset(&nvram, 0, sizeof(nvram));

	if (pci_enable_device(pdev))
		goto leave;

	pci_set_master(pdev);

	if (pci_request_regions(pdev, NAME53C8XX))
		goto disable;

	sym_init_device(pdev, &sym_dev);
	if (sym_check_supported(&sym_dev))
		goto free;

	if (sym_check_raid(&sym_dev))
		goto leave;	/* Don't disable the device */

	if (sym_set_workarounds(&sym_dev))
		goto free;

	sym_config_pqs(pdev, &sym_dev);

	sym_get_nvram(&sym_dev, &nvram);

	instance = sym_attach(&sym2_template, attach_count, &sym_dev);
	if (!instance)
		goto free;

	if (scsi_add_host(instance, &pdev->dev))
		goto detach;
	scsi_scan_host(instance);

	attach_count++;

	return 0;

 detach:
	sym_detach(pci_get_drvdata(pdev), pdev);
 free:
	pci_release_regions(pdev);
 disable:
	pci_disable_device(pdev);
 leave:
	return -ENODEV;
}

static void __devexit sym2_remove(struct pci_dev *pdev)
{
	struct sym_hcb *np = pci_get_drvdata(pdev);
	struct Scsi_Host *host = np->s.host;

	scsi_remove_host(host);
	scsi_host_put(host);

	sym_detach(np, pdev);

	pci_release_regions(pdev);
	pci_disable_device(pdev);

	attach_count--;
}

static void sym2_get_signalling(struct Scsi_Host *shost)
{
	struct sym_hcb *np = sym_get_hcb(shost);
	enum spi_signal_type type;

	switch (np->scsi_mode) {
	case SMODE_SE:
		type = SPI_SIGNAL_SE;
		break;
	case SMODE_LVD:
		type = SPI_SIGNAL_LVD;
		break;
	case SMODE_HVD:
		type = SPI_SIGNAL_HVD;
		break;
	default:
		type = SPI_SIGNAL_UNKNOWN;
		break;
	}
	spi_signalling(shost) = type;
}

static void sym2_set_offset(struct scsi_target *starget, int offset)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	tp->tgoal.offset = offset;
	tp->tgoal.check_nego = 1;
}

static void sym2_set_period(struct scsi_target *starget, int period)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	/* have to have DT for these transfers, but DT will also
	 * set width, so check that this is allowed */
	if (period <= np->minsync && spi_width(starget))
		tp->tgoal.dt = 1;

	tp->tgoal.period = period;
	tp->tgoal.check_nego = 1;
}

static void sym2_set_width(struct scsi_target *starget, int width)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	/* It is illegal to have DT set on narrow transfers.  If DT is
	 * clear, we must also clear IU and QAS.  */
	if (width == 0)
		tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;

	tp->tgoal.width = width;
	tp->tgoal.check_nego = 1;
}

static void sym2_set_dt(struct scsi_target *starget, int dt)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	/* We must clear QAS and IU if DT is clear */
	if (dt)
		tp->tgoal.dt = 1;
	else
		tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
	tp->tgoal.check_nego = 1;
}

static void sym2_set_iu(struct scsi_target *starget, int iu)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	if (iu)
		tp->tgoal.iu = tp->tgoal.dt = 1;
	else
		tp->tgoal.iu = 0;
	tp->tgoal.check_nego = 1;
}

static void sym2_set_qas(struct scsi_target *starget, int qas)
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct sym_hcb *np = sym_get_hcb(shost);
	struct sym_tcb *tp = &np->target[starget->id];

	if (qas)
		tp->tgoal.dt = tp->tgoal.qas = 1;
	else
		tp->tgoal.qas = 0;
	tp->tgoal.check_nego = 1;
}


static struct spi_function_template sym2_transport_functions = {
	.set_offset	= sym2_set_offset,
	.show_offset	= 1,
	.set_period	= sym2_set_period,
	.show_period	= 1,
	.set_width	= sym2_set_width,
	.show_width	= 1,
	.set_dt		= sym2_set_dt,
	.show_dt	= 1,
	.set_iu		= sym2_set_iu,
	.show_iu	= 1,
	.set_qas	= sym2_set_qas,
	.show_qas	= 1,
	.get_signalling	= sym2_get_signalling,
};

static struct pci_device_id sym2_id_table[] __devinitdata = {
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C810,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C820,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C825,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C815,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C810AP,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C885,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C1510,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C895A,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C875A,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_33,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_66,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875J,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
	{ 0, }
};

MODULE_DEVICE_TABLE(pci, sym2_id_table);

static struct pci_driver sym2_driver = {
	.name		= NAME53C8XX,
	.id_table	= sym2_id_table,
	.probe		= sym2_probe,
	.remove		= __devexit_p(sym2_remove),
};

static int __init sym2_init(void)
{
	int error;

	sym2_setup_params();
	sym2_transport_template = spi_attach_transport(&sym2_transport_functions);
	if (!sym2_transport_template)
		return -ENODEV;

	error = pci_register_driver(&sym2_driver);
	if (error)
		spi_release_transport(sym2_transport_template);
	return error;
}

static void __exit sym2_exit(void)
{
	pci_unregister_driver(&sym2_driver);
	spi_release_transport(sym2_transport_template);
}

module_init(sym2_init);
module_exit(sym2_exit);