2006-03-29 04:08:13 +08:00
|
|
|
/*
|
|
|
|
* linux/arch/arm/mach-pxa/lpd270.c
|
|
|
|
*
|
|
|
|
* Support for the LogicPD PXA270 Card Engine.
|
|
|
|
* Derived from the mainstone code, which carries these notices:
|
|
|
|
*
|
|
|
|
* Author: Nicolas Pitre
|
|
|
|
* Created: Nov 05, 2002
|
|
|
|
* Copyright: MontaVista Software Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/sysdev.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/fb.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
|
|
|
|
#include <asm/types.h>
|
|
|
|
#include <asm/setup.h>
|
|
|
|
#include <asm/memory.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/sizes.h>
|
|
|
|
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/mach/flash.h>
|
|
|
|
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
#include <asm/arch/lpd270.h>
|
|
|
|
#include <asm/arch/audio.h>
|
|
|
|
#include <asm/arch/pxafb.h>
|
|
|
|
#include <asm/arch/mmc.h>
|
|
|
|
#include <asm/arch/irda.h>
|
|
|
|
#include <asm/arch/ohci.h>
|
|
|
|
|
|
|
|
#include "generic.h"
|
2007-05-15 22:39:36 +08:00
|
|
|
#include "devices.h"
|
2006-03-29 04:08:13 +08:00
|
|
|
|
|
|
|
|
|
|
|
static unsigned int lpd270_irq_enabled;
|
|
|
|
|
|
|
|
static void lpd270_mask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
int lpd270_irq = irq - LPD270_IRQ(0);
|
|
|
|
|
|
|
|
__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
|
|
|
|
|
|
|
|
lpd270_irq_enabled &= ~(1 << lpd270_irq);
|
|
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void lpd270_unmask_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
int lpd270_irq = irq - LPD270_IRQ(0);
|
|
|
|
|
|
|
|
lpd270_irq_enabled |= 1 << lpd270_irq;
|
|
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
|
|
}
|
|
|
|
|
2006-08-02 05:26:25 +08:00
|
|
|
static struct irq_chip lpd270_irq_chip = {
|
|
|
|
.name = "CPLD",
|
2006-03-29 04:08:13 +08:00
|
|
|
.ack = lpd270_mask_irq,
|
|
|
|
.mask = lpd270_mask_irq,
|
|
|
|
.unmask = lpd270_unmask_irq,
|
|
|
|
};
|
|
|
|
|
2006-11-23 19:41:32 +08:00
|
|
|
static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
|
2006-03-29 04:08:13 +08:00
|
|
|
{
|
|
|
|
unsigned long pending;
|
|
|
|
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
|
|
|
|
do {
|
|
|
|
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
|
|
|
|
if (likely(pending)) {
|
|
|
|
irq = LPD270_IRQ(0) + __ffs(pending);
|
|
|
|
desc = irq_desc + irq;
|
2006-10-07 01:53:39 +08:00
|
|
|
desc_handle_irq(irq, desc);
|
2006-03-29 04:08:13 +08:00
|
|
|
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) &
|
|
|
|
lpd270_irq_enabled;
|
|
|
|
}
|
|
|
|
} while (pending);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init lpd270_init_irq(void)
|
|
|
|
{
|
|
|
|
int irq;
|
|
|
|
|
2007-06-22 11:14:09 +08:00
|
|
|
pxa27x_init_irq();
|
2006-03-29 04:08:13 +08:00
|
|
|
|
|
|
|
__raw_writew(0, LPD270_INT_MASK);
|
|
|
|
__raw_writew(0, LPD270_INT_STATUS);
|
|
|
|
|
|
|
|
/* setup extra LogicPD PXA270 irqs */
|
|
|
|
for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
|
|
|
|
set_irq_chip(irq, &lpd270_irq_chip);
|
2006-11-23 19:41:32 +08:00
|
|
|
set_irq_handler(irq, handle_level_irq);
|
2006-03-29 04:08:13 +08:00
|
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
|
|
}
|
|
|
|
set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
|
|
|
|
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int lpd270_irq_resume(struct sys_device *dev)
|
|
|
|
{
|
|
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct sysdev_class lpd270_irq_sysclass = {
|
|
|
|
set_kset_name("cpld_irq"),
|
|
|
|
.resume = lpd270_irq_resume,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct sys_device lpd270_irq_device = {
|
|
|
|
.cls = &lpd270_irq_sysclass,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init lpd270_irq_device_init(void)
|
|
|
|
{
|
|
|
|
int ret = sysdev_class_register(&lpd270_irq_sysclass);
|
|
|
|
if (ret == 0)
|
|
|
|
ret = sysdev_register(&lpd270_irq_device);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
device_initcall(lpd270_irq_device_init);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
|
|
[0] = {
|
|
|
|
.start = LPD270_ETH_PHYS,
|
|
|
|
.end = (LPD270_ETH_PHYS + 0xfffff),
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
},
|
|
|
|
[1] = {
|
|
|
|
.start = LPD270_ETHERNET_IRQ,
|
|
|
|
.end = LPD270_ETHERNET_IRQ,
|
|
|
|
.flags = IORESOURCE_IRQ,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device smc91x_device = {
|
|
|
|
.name = "smc91x",
|
|
|
|
.id = 0,
|
|
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
|
|
.resource = smc91x_resources,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device lpd270_audio_device = {
|
|
|
|
.name = "pxa2xx-ac97",
|
|
|
|
.id = -1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource lpd270_flash_resources[] = {
|
|
|
|
[0] = {
|
|
|
|
.start = PXA_CS0_PHYS,
|
|
|
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
},
|
|
|
|
[1] = {
|
|
|
|
.start = PXA_CS1_PHYS,
|
|
|
|
.end = PXA_CS1_PHYS + SZ_64M - 1,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct mtd_partition lpd270_flash0_partitions[] = {
|
|
|
|
{
|
|
|
|
.name = "Bootloader",
|
|
|
|
.size = 0x00040000,
|
|
|
|
.offset = 0,
|
|
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
|
|
}, {
|
|
|
|
.name = "Kernel",
|
|
|
|
.size = 0x00400000,
|
|
|
|
.offset = 0x00040000,
|
|
|
|
}, {
|
|
|
|
.name = "Filesystem",
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
.offset = 0x00440000
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct flash_platform_data lpd270_flash_data[2] = {
|
|
|
|
{
|
|
|
|
.name = "processor-flash",
|
|
|
|
.map_name = "cfi_probe",
|
|
|
|
.parts = lpd270_flash0_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
|
|
|
|
}, {
|
|
|
|
.name = "mainboard-flash",
|
|
|
|
.map_name = "cfi_probe",
|
|
|
|
.parts = NULL,
|
|
|
|
.nr_parts = 0,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device lpd270_flash_device[2] = {
|
|
|
|
{
|
|
|
|
.name = "pxa2xx-flash",
|
|
|
|
.id = 0,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &lpd270_flash_data[0],
|
|
|
|
},
|
|
|
|
.resource = &lpd270_flash_resources[0],
|
|
|
|
.num_resources = 1,
|
|
|
|
}, {
|
|
|
|
.name = "pxa2xx-flash",
|
|
|
|
.id = 1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &lpd270_flash_data[1],
|
|
|
|
},
|
|
|
|
.resource = &lpd270_flash_resources[1],
|
|
|
|
.num_resources = 1,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void lpd270_backlight_power(int on)
|
|
|
|
{
|
|
|
|
if (on) {
|
|
|
|
pxa_gpio_mode(GPIO16_PWM0_MD);
|
[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that
CKEN0_PWM0 --> CKEN_PWM0
CKEN1_PWM1 --> CKEN_PWM1
...
CKEN24_CAMERA --> CKEN_CAMERA
The reasons for the change of these defitions are:
1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24
2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for
3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off
Another change in the patch is to make the definitions equal to its
clock bit index, so that
#define CKEN_CAMERA (24)
instead of
#define CKEN_CAMERA (1 << 24)
this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.
Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-05 11:07:20 +08:00
|
|
|
pxa_set_cken(CKEN_PWM0, 1);
|
2006-03-29 04:08:13 +08:00
|
|
|
PWM_CTRL0 = 0;
|
|
|
|
PWM_PWDUTY0 = 0x3ff;
|
|
|
|
PWM_PERVAL0 = 0x3ff;
|
|
|
|
} else {
|
|
|
|
PWM_CTRL0 = 0;
|
|
|
|
PWM_PWDUTY0 = 0x0;
|
|
|
|
PWM_PERVAL0 = 0x3FF;
|
[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that
CKEN0_PWM0 --> CKEN_PWM0
CKEN1_PWM1 --> CKEN_PWM1
...
CKEN24_CAMERA --> CKEN_CAMERA
The reasons for the change of these defitions are:
1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24
2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for
3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off
Another change in the patch is to make the definitions equal to its
clock bit index, so that
#define CKEN_CAMERA (24)
instead of
#define CKEN_CAMERA (1 << 24)
this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.
Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-05 11:07:20 +08:00
|
|
|
pxa_set_cken(CKEN_PWM0, 0);
|
2006-03-29 04:08:13 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* 5.7" TFT QVGA (LoLo display number 1) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 150000,
|
|
|
|
.xres = 320,
|
|
|
|
.yres = 240,
|
2006-03-29 04:08:13 +08:00
|
|
|
.bpp = 16,
|
2006-06-29 23:06:30 +08:00
|
|
|
.hsync_len = 0x14,
|
|
|
|
.left_margin = 0x28,
|
|
|
|
.right_margin = 0x0a,
|
|
|
|
.vsync_len = 0x02,
|
2006-03-29 04:08:13 +08:00
|
|
|
.upper_margin = 0x08,
|
|
|
|
.lower_margin = 0x14,
|
2006-06-29 23:06:30 +08:00
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq057q3dc02 = {
|
|
|
|
.modes = &sharp_lq057q3dc02_mode,
|
|
|
|
.num_modes = 1,
|
2006-03-29 04:08:13 +08:00
|
|
|
.lccr0 = 0x07800080,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr3 = 0x00400000,
|
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 12.1" TFT SVGA (LoLo display number 2) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 50000,
|
|
|
|
.xres = 800,
|
|
|
|
.yres = 600,
|
|
|
|
.bpp = 16,
|
|
|
|
.hsync_len = 0x05,
|
|
|
|
.left_margin = 0x52,
|
|
|
|
.right_margin = 0x05,
|
|
|
|
.vsync_len = 0x04,
|
|
|
|
.upper_margin = 0x14,
|
|
|
|
.lower_margin = 0x0a,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq121s1dg31 = {
|
|
|
|
.modes = &sharp_lq121s1dg31_mode,
|
|
|
|
.num_modes = 1,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr0 = 0x07800080,
|
|
|
|
.lccr3 = 0x00400000,
|
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 3.6" TFT QVGA (LoLo display number 3) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq036q1da01_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 150000,
|
|
|
|
.xres = 320,
|
|
|
|
.yres = 240,
|
|
|
|
.bpp = 16,
|
|
|
|
.hsync_len = 0x0e,
|
|
|
|
.left_margin = 0x04,
|
|
|
|
.right_margin = 0x0a,
|
|
|
|
.vsync_len = 0x03,
|
|
|
|
.upper_margin = 0x03,
|
|
|
|
.lower_margin = 0x03,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq036q1da01 = {
|
|
|
|
.modes = &sharp_lq036q1da01_mode,
|
|
|
|
.num_modes = 1,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr0 = 0x07800080,
|
|
|
|
.lccr3 = 0x00400000,
|
2006-03-29 04:08:13 +08:00
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 6.4" TFT VGA (LoLo display number 5) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq64d343_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 25000,
|
2006-03-29 04:08:13 +08:00
|
|
|
.xres = 640,
|
|
|
|
.yres = 480,
|
|
|
|
.bpp = 16,
|
2006-06-29 23:06:30 +08:00
|
|
|
.hsync_len = 0x31,
|
2006-03-29 04:08:13 +08:00
|
|
|
.left_margin = 0x89,
|
|
|
|
.right_margin = 0x19,
|
2006-06-29 23:06:30 +08:00
|
|
|
.vsync_len = 0x12,
|
2006-03-29 04:08:13 +08:00
|
|
|
.upper_margin = 0x22,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lower_margin = 0x00,
|
2006-03-29 04:08:13 +08:00
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq64d343 = {
|
|
|
|
.modes = &sharp_lq64d343_mode,
|
|
|
|
.num_modes = 1,
|
2006-03-29 04:08:13 +08:00
|
|
|
.lccr0 = 0x07800080,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr3 = 0x00400000,
|
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 10.4" TFT VGA (LoLo display number 7) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq10d368_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 25000,
|
|
|
|
.xres = 640,
|
|
|
|
.yres = 480,
|
|
|
|
.bpp = 16,
|
|
|
|
.hsync_len = 0x31,
|
|
|
|
.left_margin = 0x89,
|
|
|
|
.right_margin = 0x19,
|
|
|
|
.vsync_len = 0x12,
|
|
|
|
.upper_margin = 0x22,
|
|
|
|
.lower_margin = 0x00,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq10d368 = {
|
|
|
|
.modes = &sharp_lq10d368_mode,
|
|
|
|
.num_modes = 1,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr0 = 0x07800080,
|
|
|
|
.lccr3 = 0x00400000,
|
2006-03-29 04:08:13 +08:00
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 3.5" TFT QVGA (LoLo display number 8) */
|
2006-09-21 05:54:21 +08:00
|
|
|
static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
|
2006-06-29 23:06:30 +08:00
|
|
|
.pixclock = 150000,
|
2006-03-29 04:08:13 +08:00
|
|
|
.xres = 240,
|
|
|
|
.yres = 320,
|
|
|
|
.bpp = 16,
|
2006-06-29 23:06:30 +08:00
|
|
|
.hsync_len = 0x0e,
|
|
|
|
.left_margin = 0x0a,
|
|
|
|
.right_margin = 0x0a,
|
|
|
|
.vsync_len = 0x03,
|
2006-03-29 04:08:13 +08:00
|
|
|
.upper_margin = 0x05,
|
|
|
|
.lower_margin = 0x14,
|
2006-06-29 23:06:30 +08:00
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
2006-09-21 05:54:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct pxafb_mach_info sharp_lq035q7db02_20 = {
|
|
|
|
.modes = &sharp_lq035q7db02_20_mode,
|
|
|
|
.num_modes = 1,
|
2006-03-29 04:08:13 +08:00
|
|
|
.lccr0 = 0x07800080,
|
2006-06-29 23:06:30 +08:00
|
|
|
.lccr3 = 0x00400000,
|
2006-03-29 04:08:13 +08:00
|
|
|
.pxafb_backlight_power = lpd270_backlight_power,
|
|
|
|
};
|
|
|
|
|
2006-06-29 23:06:30 +08:00
|
|
|
static struct pxafb_mach_info *lpd270_lcd_to_use;
|
|
|
|
|
|
|
|
static int __init lpd270_set_lcd(char *str)
|
|
|
|
{
|
|
|
|
if (!strnicmp(str, "lq057q3dc02", 11)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq057q3dc02;
|
|
|
|
} else if (!strnicmp(str, "lq121s1dg31", 11)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq121s1dg31;
|
|
|
|
} else if (!strnicmp(str, "lq036q1da01", 11)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq036q1da01;
|
|
|
|
} else if (!strnicmp(str, "lq64d343", 8)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq64d343;
|
|
|
|
} else if (!strnicmp(str, "lq10d368", 8)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq10d368;
|
|
|
|
} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
|
|
|
|
lpd270_lcd_to_use = &sharp_lq035q7db02_20;
|
|
|
|
} else {
|
|
|
|
printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
__setup("lcd=", lpd270_set_lcd);
|
|
|
|
|
2006-03-29 04:08:13 +08:00
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
|
|
&smc91x_device,
|
|
|
|
&lpd270_audio_device,
|
|
|
|
&lpd270_flash_device[0],
|
|
|
|
&lpd270_flash_device[1],
|
|
|
|
};
|
|
|
|
|
|
|
|
static int lpd270_ohci_init(struct device *dev)
|
|
|
|
{
|
|
|
|
/* setup Port1 GPIO pin. */
|
|
|
|
pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
|
|
|
|
pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
|
|
|
|
|
|
|
|
/* Set the Power Control Polarity Low and Power Sense
|
|
|
|
Polarity Low to active low. */
|
|
|
|
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
|
|
|
|
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
|
|
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
|
|
.init = lpd270_ohci_init,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init lpd270_init(void)
|
|
|
|
{
|
|
|
|
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
|
|
|
|
lpd270_flash_data[1].width = 4;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* System bus arbiter setting:
|
|
|
|
* - Core_Park
|
|
|
|
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
|
|
|
*/
|
|
|
|
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
|
|
|
|
*/
|
|
|
|
pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
|
|
|
|
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
|
|
2006-06-29 23:06:30 +08:00
|
|
|
if (lpd270_lcd_to_use != NULL)
|
|
|
|
set_pxa_fb_info(lpd270_lcd_to_use);
|
2006-03-29 04:08:13 +08:00
|
|
|
|
|
|
|
pxa_set_ohci_info(&lpd270_ohci_platform_data);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct map_desc lpd270_io_desc[] __initdata = {
|
|
|
|
{
|
|
|
|
.virtual = LPD270_CPLD_VIRT,
|
|
|
|
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
|
|
|
|
.length = LPD270_CPLD_SIZE,
|
|
|
|
.type = MT_DEVICE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init lpd270_map_io(void)
|
|
|
|
{
|
|
|
|
pxa_map_io();
|
|
|
|
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
|
|
|
|
|
|
|
|
/* initialize sleep mode regs (wake-up sources, etc) */
|
|
|
|
PGSR0 = 0x00008800;
|
|
|
|
PGSR1 = 0x00000002;
|
|
|
|
PGSR2 = 0x0001FC00;
|
|
|
|
PGSR3 = 0x00001F81;
|
|
|
|
PWER = 0xC0000002;
|
|
|
|
PRER = 0x00000002;
|
|
|
|
PFER = 0x00000002;
|
|
|
|
|
|
|
|
/* for use I SRAM as framebuffer. */
|
|
|
|
PSLR |= 0x00000F04;
|
|
|
|
PCFR = 0x00000066;
|
|
|
|
}
|
|
|
|
|
|
|
|
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
|
|
|
|
/* Maintainer: Peter Barada */
|
|
|
|
.phys_io = 0x40000000,
|
|
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
|
|
.boot_params = 0xa0000100,
|
|
|
|
.map_io = lpd270_map_io,
|
|
|
|
.init_irq = lpd270_init_irq,
|
|
|
|
.timer = &pxa_timer,
|
|
|
|
.init_machine = lpd270_init,
|
|
|
|
MACHINE_END
|