OpenCloudOS-Kernel/mm/mempool.c

563 lines
16 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/mm/mempool.c
*
* memory buffer pool support. Such pools are mostly used
* for guaranteed, deadlock-free memory allocations during
* extreme VM load.
*
* started by Ingo Molnar, Copyright (C) 2001
* debugging by David Rientjes, Copyright (C) 2015
*/
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/kasan.h>
#include <linux/kmemleak.h>
#include <linux/export.h>
#include <linux/mempool.h>
#include <linux/writeback.h>
#include "slab.h"
#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB_DEBUG_ON)
static void poison_error(mempool_t *pool, void *element, size_t size,
size_t byte)
{
const int nr = pool->curr_nr;
const int start = max_t(int, byte - (BITS_PER_LONG / 8), 0);
const int end = min_t(int, byte + (BITS_PER_LONG / 8), size);
int i;
pr_err("BUG: mempool element poison mismatch\n");
pr_err("Mempool %p size %zu\n", pool, size);
pr_err(" nr=%d @ %p: %s0x", nr, element, start > 0 ? "... " : "");
for (i = start; i < end; i++)
pr_cont("%x ", *(u8 *)(element + i));
pr_cont("%s\n", end < size ? "..." : "");
dump_stack();
}
static void __check_element(mempool_t *pool, void *element, size_t size)
{
u8 *obj = element;
size_t i;
for (i = 0; i < size; i++) {
u8 exp = (i < size - 1) ? POISON_FREE : POISON_END;
if (obj[i] != exp) {
poison_error(pool, element, size, i);
return;
}
}
memset(obj, POISON_INUSE, size);
}
static void check_element(mempool_t *pool, void *element)
{
/* Mempools backed by slab allocator */
if (pool->free == mempool_kfree) {
__check_element(pool, element, (size_t)pool->pool_data);
} else if (pool->free == mempool_free_slab) {
__check_element(pool, element, kmem_cache_size(pool->pool_data));
} else if (pool->free == mempool_free_pages) {
/* Mempools backed by page allocator */
int order = (int)(long)pool->pool_data;
void *addr = kmap_atomic((struct page *)element);
__check_element(pool, addr, 1UL << (PAGE_SHIFT + order));
kunmap_atomic(addr);
}
}
static void __poison_element(void *element, size_t size)
{
u8 *obj = element;
memset(obj, POISON_FREE, size - 1);
obj[size - 1] = POISON_END;
}
static void poison_element(mempool_t *pool, void *element)
{
/* Mempools backed by slab allocator */
if (pool->alloc == mempool_kmalloc) {
__poison_element(element, (size_t)pool->pool_data);
} else if (pool->alloc == mempool_alloc_slab) {
__poison_element(element, kmem_cache_size(pool->pool_data));
} else if (pool->alloc == mempool_alloc_pages) {
/* Mempools backed by page allocator */
int order = (int)(long)pool->pool_data;
void *addr = kmap_atomic((struct page *)element);
__poison_element(addr, 1UL << (PAGE_SHIFT + order));
kunmap_atomic(addr);
}
}
#else /* CONFIG_DEBUG_SLAB || CONFIG_SLUB_DEBUG_ON */
static inline void check_element(mempool_t *pool, void *element)
{
}
static inline void poison_element(mempool_t *pool, void *element)
{
}
#endif /* CONFIG_DEBUG_SLAB || CONFIG_SLUB_DEBUG_ON */
static __always_inline void kasan_poison_element(mempool_t *pool, void *element)
{
if (pool->alloc == mempool_alloc_slab || pool->alloc == mempool_kmalloc)
kasan_slab_free_mempool(element);
else if (pool->alloc == mempool_alloc_pages)
kasan_poison_pages(element, (unsigned long)pool->pool_data,
false);
}
static void kasan_unpoison_element(mempool_t *pool, void *element)
{
if (pool->alloc == mempool_kmalloc)
kasan_unpoison_range(element, (size_t)pool->pool_data);
else if (pool->alloc == mempool_alloc_slab)
kasan_unpoison_range(element, kmem_cache_size(pool->pool_data));
else if (pool->alloc == mempool_alloc_pages)
kasan_unpoison_pages(element, (unsigned long)pool->pool_data,
false);
}
static __always_inline void add_element(mempool_t *pool, void *element)
{
BUG_ON(pool->curr_nr >= pool->min_nr);
poison_element(pool, element);
kasan_poison_element(pool, element);
pool->elements[pool->curr_nr++] = element;
}
static void *remove_element(mempool_t *pool)
{
void *element = pool->elements[--pool->curr_nr];
BUG_ON(pool->curr_nr < 0);
kasan_unpoison_element(pool, element);
check_element(pool, element);
return element;
}
/**
* mempool_exit - exit a mempool initialized with mempool_init()
* @pool: pointer to the memory pool which was initialized with
* mempool_init().
*
* Free all reserved elements in @pool and @pool itself. This function
* only sleeps if the free_fn() function sleeps.
*
* May be called on a zeroed but uninitialized mempool (i.e. allocated with
* kzalloc()).
*/
void mempool_exit(mempool_t *pool)
{
while (pool->curr_nr) {
void *element = remove_element(pool);
pool->free(element, pool->pool_data);
}
kfree(pool->elements);
pool->elements = NULL;
}
EXPORT_SYMBOL(mempool_exit);
/**
* mempool_destroy - deallocate a memory pool
* @pool: pointer to the memory pool which was allocated via
* mempool_create().
*
* Free all reserved elements in @pool and @pool itself. This function
* only sleeps if the free_fn() function sleeps.
*/
void mempool_destroy(mempool_t *pool)
{
if (unlikely(!pool))
return;
mempool_exit(pool);
kfree(pool);
}
EXPORT_SYMBOL(mempool_destroy);
int mempool_init_node(mempool_t *pool, int min_nr, mempool_alloc_t *alloc_fn,
mempool_free_t *free_fn, void *pool_data,
gfp_t gfp_mask, int node_id)
{
spin_lock_init(&pool->lock);
pool->min_nr = min_nr;
pool->pool_data = pool_data;
pool->alloc = alloc_fn;
pool->free = free_fn;
init_waitqueue_head(&pool->wait);
pool->elements = kmalloc_array_node(min_nr, sizeof(void *),
gfp_mask, node_id);
if (!pool->elements)
return -ENOMEM;
/*
* First pre-allocate the guaranteed number of buffers.
*/
while (pool->curr_nr < pool->min_nr) {
void *element;
element = pool->alloc(gfp_mask, pool->pool_data);
if (unlikely(!element)) {
mempool_exit(pool);
return -ENOMEM;
}
add_element(pool, element);
}
return 0;
}
EXPORT_SYMBOL(mempool_init_node);
/**
* mempool_init - initialize a memory pool
* @pool: pointer to the memory pool that should be initialized
* @min_nr: the minimum number of elements guaranteed to be
* allocated for this pool.
* @alloc_fn: user-defined element-allocation function.
* @free_fn: user-defined element-freeing function.
* @pool_data: optional private data available to the user-defined functions.
*
* Like mempool_create(), but initializes the pool in (i.e. embedded in another
* structure).
*
* Return: %0 on success, negative error code otherwise.
*/
int mempool_init(mempool_t *pool, int min_nr, mempool_alloc_t *alloc_fn,
mempool_free_t *free_fn, void *pool_data)
{
return mempool_init_node(pool, min_nr, alloc_fn, free_fn,
pool_data, GFP_KERNEL, NUMA_NO_NODE);
}
EXPORT_SYMBOL(mempool_init);
/**
* mempool_create - create a memory pool
* @min_nr: the minimum number of elements guaranteed to be
* allocated for this pool.
* @alloc_fn: user-defined element-allocation function.
* @free_fn: user-defined element-freeing function.
* @pool_data: optional private data available to the user-defined functions.
*
* this function creates and allocates a guaranteed size, preallocated
* memory pool. The pool can be used from the mempool_alloc() and mempool_free()
* functions. This function might sleep. Both the alloc_fn() and the free_fn()
* functions might sleep - as long as the mempool_alloc() function is not called
* from IRQ contexts.
*
* Return: pointer to the created memory pool object or %NULL on error.
*/
mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn,
mempool_free_t *free_fn, void *pool_data)
{
mm/mempool: minor coding style tweaks Various coding style tweaks to various files under mm/ [daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 09:40:12 +08:00
return mempool_create_node(min_nr, alloc_fn, free_fn, pool_data,
GFP_KERNEL, NUMA_NO_NODE);
}
EXPORT_SYMBOL(mempool_create);
mempool_t *mempool_create_node(int min_nr, mempool_alloc_t *alloc_fn,
mempool_free_t *free_fn, void *pool_data,
gfp_t gfp_mask, int node_id)
{
mempool_t *pool;
pool = kzalloc_node(sizeof(*pool), gfp_mask, node_id);
if (!pool)
return NULL;
if (mempool_init_node(pool, min_nr, alloc_fn, free_fn, pool_data,
gfp_mask, node_id)) {
kfree(pool);
return NULL;
}
return pool;
}
EXPORT_SYMBOL(mempool_create_node);
/**
* mempool_resize - resize an existing memory pool
* @pool: pointer to the memory pool which was allocated via
* mempool_create().
* @new_min_nr: the new minimum number of elements guaranteed to be
* allocated for this pool.
*
* This function shrinks/grows the pool. In the case of growing,
* it cannot be guaranteed that the pool will be grown to the new
* size immediately, but new mempool_free() calls will refill it.
* This function may sleep.
*
* Note, the caller must guarantee that no mempool_destroy is called
* while this function is running. mempool_alloc() & mempool_free()
* might be called (eg. from IRQ contexts) while this function executes.
*
* Return: %0 on success, negative error code otherwise.
*/
int mempool_resize(mempool_t *pool, int new_min_nr)
{
void *element;
void **new_elements;
unsigned long flags;
BUG_ON(new_min_nr <= 0);
might_sleep();
spin_lock_irqsave(&pool->lock, flags);
if (new_min_nr <= pool->min_nr) {
while (new_min_nr < pool->curr_nr) {
element = remove_element(pool);
spin_unlock_irqrestore(&pool->lock, flags);
pool->free(element, pool->pool_data);
spin_lock_irqsave(&pool->lock, flags);
}
pool->min_nr = new_min_nr;
goto out_unlock;
}
spin_unlock_irqrestore(&pool->lock, flags);
/* Grow the pool */
new_elements = kmalloc_array(new_min_nr, sizeof(*new_elements),
GFP_KERNEL);
if (!new_elements)
return -ENOMEM;
spin_lock_irqsave(&pool->lock, flags);
if (unlikely(new_min_nr <= pool->min_nr)) {
/* Raced, other resize will do our work */
spin_unlock_irqrestore(&pool->lock, flags);
kfree(new_elements);
goto out;
}
memcpy(new_elements, pool->elements,
pool->curr_nr * sizeof(*new_elements));
kfree(pool->elements);
pool->elements = new_elements;
pool->min_nr = new_min_nr;
while (pool->curr_nr < pool->min_nr) {
spin_unlock_irqrestore(&pool->lock, flags);
element = pool->alloc(GFP_KERNEL, pool->pool_data);
if (!element)
goto out;
spin_lock_irqsave(&pool->lock, flags);
if (pool->curr_nr < pool->min_nr) {
add_element(pool, element);
} else {
spin_unlock_irqrestore(&pool->lock, flags);
pool->free(element, pool->pool_data); /* Raced */
goto out;
}
}
out_unlock:
spin_unlock_irqrestore(&pool->lock, flags);
out:
return 0;
}
EXPORT_SYMBOL(mempool_resize);
/**
* mempool_alloc - allocate an element from a specific memory pool
* @pool: pointer to the memory pool which was allocated via
* mempool_create().
* @gfp_mask: the usual allocation bitmask.
*
* this function only sleeps if the alloc_fn() function sleeps or
* returns NULL. Note that due to preallocation, this function
* *never* fails when called from process contexts. (it might
* fail if called from an IRQ context.)
Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements" This reverts commit f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). There has been a report about OOM killer invoked when swapping out to a dm-crypt device. The primary reason seems to be that the swapout out IO managed to completely deplete memory reserves. Ondrej was able to bisect and explained the issue by pointing to f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). The reason is that the swapout path is not throttled properly because the md-raid layer needs to allocate from the generic_make_request path which means it allocates from the PF_MEMALLOC context. dm layer uses mempool_alloc in order to guarantee a forward progress which used to inhibit access to memory reserves when using page allocator. This has changed by f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements") which has dropped the __GFP_NOMEMALLOC protection when the memory pool is depleted. If we are running out of memory and the only way forward to free memory is to perform swapout we just keep consuming memory reserves rather than throttling the mempool allocations and allowing the pending IO to complete up to a moment when the memory is depleted completely and there is no way forward but invoking the OOM killer. This is less than optimal. The original intention of f9054c70d28b was to help with the OOM situations where the oom victim depends on mempool allocation to make a forward progress. David has mentioned the following backtrace: schedule schedule_timeout io_schedule_timeout mempool_alloc __split_and_process_bio dm_request generic_make_request submit_bio mpage_readpages ext4_readpages __do_page_cache_readahead ra_submit filemap_fault handle_mm_fault __do_page_fault do_page_fault page_fault We do not know more about why the mempool is depleted without being replenished in time, though. In any case the dm layer shouldn't depend on any allocations outside of the dedicated pools so a forward progress should be guaranteed. If this is not the case then the dm should be fixed rather than papering over the problem and postponing it to later by accessing more memory reserves. mempools are a mechanism to maintain dedicated memory reserves to guaratee forward progress. Allowing them an unbounded access to the page allocator memory reserves is going against the whole purpose of this mechanism. Bisected by Ondrej Kozina. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160721145309.GR26379@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NeilBrown <neilb@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 06:48:44 +08:00
* Note: using __GFP_ZERO is not supported.
*
* Return: pointer to the allocated element or %NULL on error.
*/
void *mempool_alloc(mempool_t *pool, gfp_t gfp_mask)
{
void *element;
unsigned long flags;
wait_queue_entry_t wait;
gfp_t gfp_temp;
VM_WARN_ON_ONCE(gfp_mask & __GFP_ZERO);
might_alloc(gfp_mask);
Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements" This reverts commit f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). There has been a report about OOM killer invoked when swapping out to a dm-crypt device. The primary reason seems to be that the swapout out IO managed to completely deplete memory reserves. Ondrej was able to bisect and explained the issue by pointing to f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). The reason is that the swapout path is not throttled properly because the md-raid layer needs to allocate from the generic_make_request path which means it allocates from the PF_MEMALLOC context. dm layer uses mempool_alloc in order to guarantee a forward progress which used to inhibit access to memory reserves when using page allocator. This has changed by f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements") which has dropped the __GFP_NOMEMALLOC protection when the memory pool is depleted. If we are running out of memory and the only way forward to free memory is to perform swapout we just keep consuming memory reserves rather than throttling the mempool allocations and allowing the pending IO to complete up to a moment when the memory is depleted completely and there is no way forward but invoking the OOM killer. This is less than optimal. The original intention of f9054c70d28b was to help with the OOM situations where the oom victim depends on mempool allocation to make a forward progress. David has mentioned the following backtrace: schedule schedule_timeout io_schedule_timeout mempool_alloc __split_and_process_bio dm_request generic_make_request submit_bio mpage_readpages ext4_readpages __do_page_cache_readahead ra_submit filemap_fault handle_mm_fault __do_page_fault do_page_fault page_fault We do not know more about why the mempool is depleted without being replenished in time, though. In any case the dm layer shouldn't depend on any allocations outside of the dedicated pools so a forward progress should be guaranteed. If this is not the case then the dm should be fixed rather than papering over the problem and postponing it to later by accessing more memory reserves. mempools are a mechanism to maintain dedicated memory reserves to guaratee forward progress. Allowing them an unbounded access to the page allocator memory reserves is going against the whole purpose of this mechanism. Bisected by Ondrej Kozina. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160721145309.GR26379@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NeilBrown <neilb@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 06:48:44 +08:00
gfp_mask |= __GFP_NOMEMALLOC; /* don't allocate emergency reserves */
gfp_mask |= __GFP_NORETRY; /* don't loop in __alloc_pages */
gfp_mask |= __GFP_NOWARN; /* failures are OK */
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 08:28:21 +08:00
gfp_temp = gfp_mask & ~(__GFP_DIRECT_RECLAIM|__GFP_IO);
repeat_alloc:
element = pool->alloc(gfp_temp, pool->pool_data);
if (likely(element != NULL))
return element;
spin_lock_irqsave(&pool->lock, flags);
if (likely(pool->curr_nr)) {
element = remove_element(pool);
spin_unlock_irqrestore(&pool->lock, flags);
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
/* paired with rmb in mempool_free(), read comment there */
smp_wmb();
/*
* Update the allocation stack trace as this is more useful
* for debugging.
*/
kmemleak_update_trace(element);
return element;
}
/*
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 08:28:21 +08:00
* We use gfp mask w/o direct reclaim or IO for the first round. If
* alloc failed with that and @pool was empty, retry immediately.
*/
Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements" This reverts commit f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). There has been a report about OOM killer invoked when swapping out to a dm-crypt device. The primary reason seems to be that the swapout out IO managed to completely deplete memory reserves. Ondrej was able to bisect and explained the issue by pointing to f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"). The reason is that the swapout path is not throttled properly because the md-raid layer needs to allocate from the generic_make_request path which means it allocates from the PF_MEMALLOC context. dm layer uses mempool_alloc in order to guarantee a forward progress which used to inhibit access to memory reserves when using page allocator. This has changed by f9054c70d28b ("mm, mempool: only set __GFP_NOMEMALLOC if there are free elements") which has dropped the __GFP_NOMEMALLOC protection when the memory pool is depleted. If we are running out of memory and the only way forward to free memory is to perform swapout we just keep consuming memory reserves rather than throttling the mempool allocations and allowing the pending IO to complete up to a moment when the memory is depleted completely and there is no way forward but invoking the OOM killer. This is less than optimal. The original intention of f9054c70d28b was to help with the OOM situations where the oom victim depends on mempool allocation to make a forward progress. David has mentioned the following backtrace: schedule schedule_timeout io_schedule_timeout mempool_alloc __split_and_process_bio dm_request generic_make_request submit_bio mpage_readpages ext4_readpages __do_page_cache_readahead ra_submit filemap_fault handle_mm_fault __do_page_fault do_page_fault page_fault We do not know more about why the mempool is depleted without being replenished in time, though. In any case the dm layer shouldn't depend on any allocations outside of the dedicated pools so a forward progress should be guaranteed. If this is not the case then the dm should be fixed rather than papering over the problem and postponing it to later by accessing more memory reserves. mempools are a mechanism to maintain dedicated memory reserves to guaratee forward progress. Allowing them an unbounded access to the page allocator memory reserves is going against the whole purpose of this mechanism. Bisected by Ondrej Kozina. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160721145309.GR26379@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NeilBrown <neilb@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 06:48:44 +08:00
if (gfp_temp != gfp_mask) {
spin_unlock_irqrestore(&pool->lock, flags);
gfp_temp = gfp_mask;
goto repeat_alloc;
}
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 08:28:21 +08:00
/* We must not sleep if !__GFP_DIRECT_RECLAIM */
if (!(gfp_mask & __GFP_DIRECT_RECLAIM)) {
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
spin_unlock_irqrestore(&pool->lock, flags);
return NULL;
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
}
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
/* Let's wait for someone else to return an element to @pool */
init_wait(&wait);
prepare_to_wait(&pool->wait, &wait, TASK_UNINTERRUPTIBLE);
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
spin_unlock_irqrestore(&pool->lock, flags);
/*
* FIXME: this should be io_schedule(). The timeout is there as a
* workaround for some DM problems in 2.6.18.
*/
io_schedule_timeout(5*HZ);
finish_wait(&pool->wait, &wait);
goto repeat_alloc;
}
EXPORT_SYMBOL(mempool_alloc);
/**
* mempool_free - return an element to the pool.
* @element: pool element pointer.
* @pool: pointer to the memory pool which was allocated via
* mempool_create().
*
* this function only sleeps if the free_fn() function sleeps.
*/
void mempool_free(void *element, mempool_t *pool)
{
unsigned long flags;
if (unlikely(element == NULL))
return;
mempool: fix and document synchronization and memory barrier usage mempool_alloc/free() use undocumented smp_mb()'s. The code is slightly broken and misleading. The lockless part is in mempool_free(). It wants to determine whether the item being freed needs to be returned to the pool or backing allocator without grabbing pool->lock. Two things need to be guaranteed for correct operation. 1. pool->curr_nr + #allocated should never dip below pool->min_nr. 2. Waiters shouldn't be left dangling. For #1, The only necessary condition is that curr_nr visible at free is from after the allocation of the element being freed (details in the comment). For most cases, this is true without any barrier but there can be fringe cases where the allocated pointer is passed to the freeing task without going through memory barriers. To cover this case, wmb is necessary before returning from allocation and rmb is necessary before reading curr_nr. IOW, ALLOCATING TASK FREEING TASK update pool state after alloc; wmb(); pass pointer to freeing task; read pointer; rmb(); read pool state to free; The current code doesn't have wmb after pool update during allocation and may theoretically, on machines where unlock doesn't behave as full wmb, lead to pool depletion and deadlock. smp_wmb() needs to be added after successful allocation from reserved elements and smp_mb() in mempool_free() can be replaced with smp_rmb(). For #2, the waiter needs to add itself to waitqueue and then check the wait condition and the waker needs to update the wait condition and then wake up. Because waitqueue operations always go through full spinlock synchronization, there is no need for extra memory barriers. Furthermore, mempool_alloc() is already holding pool->lock when it decides that it needs to wait. There is no reason to do unlock - add waitqueue - test condition again. It can simply add itself to waitqueue while holding pool->lock and then unlock and sleep. This patch adds smp_wmb() after successful allocation from reserved pool, replaces smp_mb() in mempool_free() with smp_rmb() and extend pool->lock over waitqueue addition. More importantly, it explains what memory barriers do and how the lockless testing is correct. -v2: Oleg pointed out that unlock doesn't imply wmb. Added explicit smp_wmb() after successful allocation from reserved pool and updated comments accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:08:23 +08:00
/*
* Paired with the wmb in mempool_alloc(). The preceding read is
* for @element and the following @pool->curr_nr. This ensures
* that the visible value of @pool->curr_nr is from after the
* allocation of @element. This is necessary for fringe cases
* where @element was passed to this task without going through
* barriers.
*
* For example, assume @p is %NULL at the beginning and one task
* performs "p = mempool_alloc(...);" while another task is doing
* "while (!p) cpu_relax(); mempool_free(p, ...);". This function
* may end up using curr_nr value which is from before allocation
* of @p without the following rmb.
*/
smp_rmb();
/*
* For correctness, we need a test which is guaranteed to trigger
* if curr_nr + #allocated == min_nr. Testing curr_nr < min_nr
* without locking achieves that and refilling as soon as possible
* is desirable.
*
* Because curr_nr visible here is always a value after the
* allocation of @element, any task which decremented curr_nr below
* min_nr is guaranteed to see curr_nr < min_nr unless curr_nr gets
* incremented to min_nr afterwards. If curr_nr gets incremented
* to min_nr after the allocation of @element, the elements
* allocated after that are subject to the same guarantee.
*
* Waiters happen iff curr_nr is 0 and the above guarantee also
* ensures that there will be frees which return elements to the
* pool waking up the waiters.
*/
mm/mempool: fix a data race in mempool_free() mempool_t pool.curr_nr could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in mempool_free / remove_element write to 0xffffffffa937638c of 4 bytes by task 6359 on cpu 113: remove_element+0x4a/0x1c0 remove_element at mm/mempool.c:132 mempool_alloc+0x102/0x210 (inlined by) mempool_alloc at mm/mempool.c:399 bio_alloc_bioset+0x106/0x2c0 get_swap_bio+0x49/0x230 __swap_writepage+0x680/0xc30 swap_writepage+0x9c/0xf0 pageout+0x33e/0xae0 shrink_page_list+0x1f57/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 <snip> read to 0xffffffffa937638c of 4 bytes by interrupt on cpu 64: mempool_free+0x3e/0x150 mempool_free at mm/mempool.c:492 bio_free+0x192/0x280 bio_put+0x91/0xd0 end_swap_bio_write+0x1d8/0x280 bio_endio+0x2c2/0x5b0 dec_pending+0x22b/0x440 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x2c2/0x5b0 blk_update_request+0x217/0x940 scsi_end_request+0x6b/0x4d0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x223/0x310 scsi_softirq_done+0x1d5/0x210 blk_mq_complete_request+0x224/0x250 scsi_mq_done+0xc2/0x250 pqi_raid_io_complete+0x5a/0x70 [smartpqi] pqi_irq_handler+0x150/0x1410 [smartpqi] __handle_irq_event_percpu+0x90/0x540 handle_irq_event_percpu+0x49/0xd0 handle_irq_event+0x85/0xca handle_edge_irq+0x13f/0x3e0 do_IRQ+0x86/0x190 <snip> Since the write is under pool->lock but the read is done as lockless. Even though the commit 5b990546e334 ("mempool: fix and document synchronization and memory barrier usage") introduced the smp_wmb() and smp_rmb() pair to improve the situation, it is adequate to protect it from data races which could lead to a logic bug, so fix it by adding READ_ONCE() for the read. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/1581446384-2131-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 08:31:44 +08:00
if (unlikely(READ_ONCE(pool->curr_nr) < pool->min_nr)) {
spin_lock_irqsave(&pool->lock, flags);
if (likely(pool->curr_nr < pool->min_nr)) {
add_element(pool, element);
spin_unlock_irqrestore(&pool->lock, flags);
wake_up(&pool->wait);
return;
}
spin_unlock_irqrestore(&pool->lock, flags);
}
pool->free(element, pool->pool_data);
}
EXPORT_SYMBOL(mempool_free);
/*
* A commonly used alloc and free fn.
*/
void *mempool_alloc_slab(gfp_t gfp_mask, void *pool_data)
{
struct kmem_cache *mem = pool_data;
VM_BUG_ON(mem->ctor);
return kmem_cache_alloc(mem, gfp_mask);
}
EXPORT_SYMBOL(mempool_alloc_slab);
void mempool_free_slab(void *element, void *pool_data)
{
struct kmem_cache *mem = pool_data;
kmem_cache_free(mem, element);
}
EXPORT_SYMBOL(mempool_free_slab);
/*
* A commonly used alloc and free fn that kmalloc/kfrees the amount of memory
* specified by pool_data
*/
void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data)
{
size_t size = (size_t)pool_data;
return kmalloc(size, gfp_mask);
}
EXPORT_SYMBOL(mempool_kmalloc);
void mempool_kfree(void *element, void *pool_data)
{
kfree(element);
}
EXPORT_SYMBOL(mempool_kfree);
/*
* A simple mempool-backed page allocator that allocates pages
* of the order specified by pool_data.
*/
void *mempool_alloc_pages(gfp_t gfp_mask, void *pool_data)
{
int order = (int)(long)pool_data;
return alloc_pages(gfp_mask, order);
}
EXPORT_SYMBOL(mempool_alloc_pages);
void mempool_free_pages(void *element, void *pool_data)
{
int order = (int)(long)pool_data;
__free_pages(element, order);
}
EXPORT_SYMBOL(mempool_free_pages);