OpenCloudOS-Kernel/drivers/gpu/drm/arm/malidp_planes.c

1041 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
* Author: Liviu Dudau <Liviu.Dudau@arm.com>
*
* ARM Mali DP plane manipulation routines.
*/
#include <linux/iommu.h>
#include <linux/platform_device.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
#include "malidp_hw.h"
#include "malidp_drv.h"
/* Layer specific register offsets */
#define MALIDP_LAYER_FORMAT 0x000
#define LAYER_FORMAT_MASK 0x3f
#define MALIDP_LAYER_CONTROL 0x004
#define LAYER_ENABLE (1 << 0)
#define LAYER_FLOWCFG_MASK 7
#define LAYER_FLOWCFG(x) (((x) & LAYER_FLOWCFG_MASK) << 1)
#define LAYER_FLOWCFG_SCALE_SE 3
#define LAYER_ROT_OFFSET 8
#define LAYER_H_FLIP (1 << 10)
#define LAYER_V_FLIP (1 << 11)
#define LAYER_ROT_MASK (0xf << 8)
#define LAYER_COMP_MASK (0x3 << 12)
#define LAYER_COMP_PIXEL (0x3 << 12)
#define LAYER_COMP_PLANE (0x2 << 12)
#define LAYER_PMUL_ENABLE (0x1 << 14)
#define LAYER_ALPHA_OFFSET (16)
#define LAYER_ALPHA_MASK (0xff)
#define LAYER_ALPHA(x) (((x) & LAYER_ALPHA_MASK) << LAYER_ALPHA_OFFSET)
#define MALIDP_LAYER_COMPOSE 0x008
#define MALIDP_LAYER_SIZE 0x00c
#define LAYER_H_VAL(x) (((x) & 0x1fff) << 0)
#define LAYER_V_VAL(x) (((x) & 0x1fff) << 16)
#define MALIDP_LAYER_COMP_SIZE 0x010
#define MALIDP_LAYER_OFFSET 0x014
#define MALIDP550_LS_ENABLE 0x01c
#define MALIDP550_LS_R1_IN_SIZE 0x020
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
#define MODIFIERS_COUNT_MAX 15
/*
* This 4-entry look-up-table is used to determine the full 8-bit alpha value
* for formats with 1- or 2-bit alpha channels.
* We set it to give 100%/0% opacity for 1-bit formats and 100%/66%/33%/0%
* opacity for 2-bit formats.
*/
#define MALIDP_ALPHA_LUT 0xffaa5500
/* page sizes the MMU prefetcher can support */
#define MALIDP_MMU_PREFETCH_PARTIAL_PGSIZES (SZ_4K | SZ_64K)
#define MALIDP_MMU_PREFETCH_FULL_PGSIZES (SZ_1M | SZ_2M)
/* readahead for partial-frame prefetch */
#define MALIDP_MMU_PREFETCH_READAHEAD 8
static void malidp_de_plane_destroy(struct drm_plane *plane)
{
struct malidp_plane *mp = to_malidp_plane(plane);
drm_plane_cleanup(plane);
kfree(mp);
}
/*
* Replicate what the default ->reset hook does: free the state pointer and
* allocate a new empty object. We just need enough space to store
* a malidp_plane_state instead of a drm_plane_state.
*/
static void malidp_plane_reset(struct drm_plane *plane)
{
struct malidp_plane_state *state = to_malidp_plane_state(plane->state);
if (state)
__drm_atomic_helper_plane_destroy_state(&state->base);
kfree(state);
plane->state = NULL;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (state)
__drm_atomic_helper_plane_reset(plane, &state->base);
}
static struct
drm_plane_state *malidp_duplicate_plane_state(struct drm_plane *plane)
{
struct malidp_plane_state *state, *m_state;
if (!plane->state)
return NULL;
state = kmalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return NULL;
m_state = to_malidp_plane_state(plane->state);
__drm_atomic_helper_plane_duplicate_state(plane, &state->base);
state->rotmem_size = m_state->rotmem_size;
state->format = m_state->format;
state->n_planes = m_state->n_planes;
state->mmu_prefetch_mode = m_state->mmu_prefetch_mode;
state->mmu_prefetch_pgsize = m_state->mmu_prefetch_pgsize;
return &state->base;
}
static void malidp_destroy_plane_state(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct malidp_plane_state *m_state = to_malidp_plane_state(state);
__drm_atomic_helper_plane_destroy_state(state);
kfree(m_state);
}
static const char * const prefetch_mode_names[] = {
[MALIDP_PREFETCH_MODE_NONE] = "MMU_PREFETCH_NONE",
[MALIDP_PREFETCH_MODE_PARTIAL] = "MMU_PREFETCH_PARTIAL",
[MALIDP_PREFETCH_MODE_FULL] = "MMU_PREFETCH_FULL",
};
static void malidp_plane_atomic_print_state(struct drm_printer *p,
const struct drm_plane_state *state)
{
struct malidp_plane_state *ms = to_malidp_plane_state(state);
drm_printf(p, "\trotmem_size=%u\n", ms->rotmem_size);
drm_printf(p, "\tformat_id=%u\n", ms->format);
drm_printf(p, "\tn_planes=%u\n", ms->n_planes);
drm_printf(p, "\tmmu_prefetch_mode=%s\n",
prefetch_mode_names[ms->mmu_prefetch_mode]);
drm_printf(p, "\tmmu_prefetch_pgsize=%d\n", ms->mmu_prefetch_pgsize);
}
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
bool malidp_format_mod_supported(struct drm_device *drm,
u32 format, u64 modifier)
{
const struct drm_format_info *info;
const u64 *modifiers;
struct malidp_drm *malidp = drm->dev_private;
const struct malidp_hw_regmap *map = &malidp->dev->hw->map;
if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
return false;
/* Some pixel formats are supported without any modifier */
if (modifier == DRM_FORMAT_MOD_LINEAR) {
/*
* However these pixel formats need to be supported with
* modifiers only
*/
return !malidp_hw_format_is_afbc_only(format);
}
if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_ARM) {
DRM_ERROR("Unknown modifier (not Arm)\n");
return false;
}
if (modifier &
~DRM_FORMAT_MOD_ARM_AFBC(AFBC_MOD_VALID_BITS)) {
DRM_DEBUG_KMS("Unsupported modifiers\n");
return false;
}
modifiers = malidp_format_modifiers;
/* SPLIT buffers must use SPARSE layout */
if (WARN_ON_ONCE((modifier & AFBC_SPLIT) && !(modifier & AFBC_SPARSE)))
return false;
/* CBR only applies to YUV formats, where YTR should be always 0 */
if (WARN_ON_ONCE((modifier & AFBC_CBR) && (modifier & AFBC_YTR)))
return false;
while (*modifiers != DRM_FORMAT_MOD_INVALID) {
if (*modifiers == modifier)
break;
modifiers++;
}
/* return false, if the modifier was not found */
if (*modifiers == DRM_FORMAT_MOD_INVALID) {
DRM_DEBUG_KMS("Unsupported modifier\n");
return false;
}
info = drm_format_info(format);
if (info->num_planes != 1) {
DRM_DEBUG_KMS("AFBC buffers expect one plane\n");
return false;
}
if (malidp_hw_format_is_linear_only(format) == true) {
DRM_DEBUG_KMS("Given format (0x%x) is supported is linear mode only\n",
format);
return false;
}
/*
* RGB formats need to provide YTR modifier and YUV formats should not
* provide YTR modifier.
*/
if (!(info->is_yuv) != !!(modifier & AFBC_FORMAT_MOD_YTR)) {
DRM_DEBUG_KMS("AFBC_FORMAT_MOD_YTR is %s for %s formats\n",
info->is_yuv ? "disallowed" : "mandatory",
info->is_yuv ? "YUV" : "RGB");
return false;
}
if (modifier & AFBC_SPLIT) {
if (!info->is_yuv) {
if (info->cpp[0] <= 2) {
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
DRM_DEBUG_KMS("RGB formats <= 16bpp are not supported with SPLIT\n");
return false;
}
}
if ((info->hsub != 1) || (info->vsub != 1)) {
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
if (!(format == DRM_FORMAT_YUV420_10BIT &&
(map->features & MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT))) {
DRM_DEBUG_KMS("Formats which are sub-sampled should never be split\n");
return false;
}
}
}
if (modifier & AFBC_CBR) {
if ((info->hsub == 1) || (info->vsub == 1)) {
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
DRM_DEBUG_KMS("Formats which are not sub-sampled should not have CBR set\n");
return false;
}
}
return true;
}
static bool malidp_format_mod_supported_per_plane(struct drm_plane *plane,
u32 format, u64 modifier)
{
return malidp_format_mod_supported(plane->dev, format, modifier);
}
static const struct drm_plane_funcs malidp_de_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = malidp_de_plane_destroy,
.reset = malidp_plane_reset,
.atomic_duplicate_state = malidp_duplicate_plane_state,
.atomic_destroy_state = malidp_destroy_plane_state,
.atomic_print_state = malidp_plane_atomic_print_state,
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
.format_mod_supported = malidp_format_mod_supported_per_plane,
};
static int malidp_se_check_scaling(struct malidp_plane *mp,
struct drm_plane_state *state)
{
struct drm_crtc_state *crtc_state =
drm_atomic_get_existing_crtc_state(state->state, state->crtc);
struct malidp_crtc_state *mc;
u32 src_w, src_h;
int ret;
if (!crtc_state)
return -EINVAL;
mc = to_malidp_crtc_state(crtc_state);
drm: Don't pass clip to drm_atomic_helper_check_plane_state() Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2018-01-24 01:08:57 +08:00
ret = drm_atomic_helper_check_plane_state(state, crtc_state,
0, INT_MAX, true, true);
if (ret)
return ret;
if (state->rotation & MALIDP_ROTATED_MASK) {
src_w = state->src_h >> 16;
src_h = state->src_w >> 16;
} else {
src_w = state->src_w >> 16;
src_h = state->src_h >> 16;
}
if ((state->crtc_w == src_w) && (state->crtc_h == src_h)) {
/* Scaling not necessary for this plane. */
mc->scaled_planes_mask &= ~(mp->layer->id);
return 0;
}
if (mp->layer->id & (DE_SMART | DE_GRAPHICS2))
return -EINVAL;
mc->scaled_planes_mask |= mp->layer->id;
/* Defer scaling requirements calculation to the crtc check. */
return 0;
}
static u32 malidp_get_pgsize_bitmap(struct malidp_plane *mp)
{
u32 pgsize_bitmap = 0;
if (iommu_present(&platform_bus_type)) {
struct iommu_domain *mmu_dom =
iommu_get_domain_for_dev(mp->base.dev->dev);
if (mmu_dom)
pgsize_bitmap = mmu_dom->pgsize_bitmap;
}
return pgsize_bitmap;
}
/*
* Check if the framebuffer is entirely made up of pages at least pgsize in
* size. Only a heuristic: assumes that each scatterlist entry has been aligned
* to the largest page size smaller than its length and that the MMU maps to
* the largest page size possible.
*/
static bool malidp_check_pages_threshold(struct malidp_plane_state *ms,
u32 pgsize)
{
int i;
for (i = 0; i < ms->n_planes; i++) {
struct drm_gem_object *obj;
struct drm_gem_cma_object *cma_obj;
struct sg_table *sgt;
struct scatterlist *sgl;
obj = drm_gem_fb_get_obj(ms->base.fb, i);
cma_obj = to_drm_gem_cma_obj(obj);
if (cma_obj->sgt)
sgt = cma_obj->sgt;
else
sgt = obj->dev->driver->gem_prime_get_sg_table(obj);
if (!sgt)
return false;
sgl = sgt->sgl;
while (sgl) {
if (sgl->length < pgsize) {
if (!cma_obj->sgt)
kfree(sgt);
return false;
}
sgl = sg_next(sgl);
}
if (!cma_obj->sgt)
kfree(sgt);
}
return true;
}
/*
* Check if it is possible to enable partial-frame MMU prefetch given the
* current format, AFBC state and rotation.
*/
static bool malidp_partial_prefetch_supported(u32 format, u64 modifier,
unsigned int rotation)
{
bool afbc, sparse;
/* rotation and horizontal flip not supported for partial prefetch */
if (rotation & (DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X))
return false;
afbc = modifier & DRM_FORMAT_MOD_ARM_AFBC(0);
sparse = modifier & AFBC_FORMAT_MOD_SPARSE;
switch (format) {
case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_RGBA1010102:
case DRM_FORMAT_BGRA1010102:
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_RGBA8888:
case DRM_FORMAT_BGRA8888:
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_BGRX8888:
case DRM_FORMAT_RGB888:
case DRM_FORMAT_RGBA5551:
case DRM_FORMAT_RGB565:
/* always supported */
return true;
case DRM_FORMAT_ABGR2101010:
case DRM_FORMAT_ABGR8888:
case DRM_FORMAT_ABGR1555:
case DRM_FORMAT_BGR565:
/* supported, but if AFBC then must be sparse mode */
return (!afbc) || (afbc && sparse);
case DRM_FORMAT_BGR888:
/* supported, but not for AFBC */
return !afbc;
case DRM_FORMAT_YUYV:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_NV12:
case DRM_FORMAT_YUV420:
/* not supported */
return false;
default:
return false;
}
}
/*
* Select the preferred MMU prefetch mode. Full-frame prefetch is preferred as
* long as the framebuffer is all large pages. Otherwise partial-frame prefetch
* is selected as long as it is supported for the current format. The selected
* page size for prefetch is returned in pgsize_bitmap.
*/
static enum mmu_prefetch_mode malidp_mmu_prefetch_select_mode
(struct malidp_plane_state *ms, u32 *pgsize_bitmap)
{
u32 pgsizes;
/* get the full-frame prefetch page size(s) supported by the MMU */
pgsizes = *pgsize_bitmap & MALIDP_MMU_PREFETCH_FULL_PGSIZES;
while (pgsizes) {
u32 largest_pgsize = 1 << __fls(pgsizes);
if (malidp_check_pages_threshold(ms, largest_pgsize)) {
*pgsize_bitmap = largest_pgsize;
return MALIDP_PREFETCH_MODE_FULL;
}
pgsizes -= largest_pgsize;
}
/* get the partial-frame prefetch page size(s) supported by the MMU */
pgsizes = *pgsize_bitmap & MALIDP_MMU_PREFETCH_PARTIAL_PGSIZES;
if (malidp_partial_prefetch_supported(ms->base.fb->format->format,
ms->base.fb->modifier,
ms->base.rotation)) {
/* partial prefetch using the smallest page size */
*pgsize_bitmap = 1 << __ffs(pgsizes);
return MALIDP_PREFETCH_MODE_PARTIAL;
}
*pgsize_bitmap = 0;
return MALIDP_PREFETCH_MODE_NONE;
}
static u32 malidp_calc_mmu_control_value(enum mmu_prefetch_mode mode,
u8 readahead, u8 n_planes, u32 pgsize)
{
u32 mmu_ctrl = 0;
if (mode != MALIDP_PREFETCH_MODE_NONE) {
mmu_ctrl |= MALIDP_MMU_CTRL_EN;
if (mode == MALIDP_PREFETCH_MODE_PARTIAL) {
mmu_ctrl |= MALIDP_MMU_CTRL_MODE;
mmu_ctrl |= MALIDP_MMU_CTRL_PP_NUM_REQ(readahead);
}
if (pgsize == SZ_64K || pgsize == SZ_2M) {
int i;
for (i = 0; i < n_planes; i++)
mmu_ctrl |= MALIDP_MMU_CTRL_PX_PS(i);
}
}
return mmu_ctrl;
}
static void malidp_de_prefetch_settings(struct malidp_plane *mp,
struct malidp_plane_state *ms)
{
if (!mp->layer->mmu_ctrl_offset)
return;
/* get the page sizes supported by the MMU */
ms->mmu_prefetch_pgsize = malidp_get_pgsize_bitmap(mp);
ms->mmu_prefetch_mode =
malidp_mmu_prefetch_select_mode(ms, &ms->mmu_prefetch_pgsize);
}
static int malidp_de_plane_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct malidp_plane *mp = to_malidp_plane(plane);
struct malidp_plane_state *ms = to_malidp_plane_state(state);
bool rotated = state->rotation & MALIDP_ROTATED_MASK;
struct drm_framebuffer *fb;
u16 pixel_alpha = state->pixel_blend_mode;
int i, ret;
unsigned int block_w, block_h;
if (!state->crtc || WARN_ON(!state->fb))
return 0;
fb = state->fb;
ms->format = malidp_hw_get_format_id(&mp->hwdev->hw->map,
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
mp->layer->id, fb->format->format,
!!fb->modifier);
if (ms->format == MALIDP_INVALID_FORMAT_ID)
return -EINVAL;
ms->n_planes = fb->format->num_planes;
for (i = 0; i < ms->n_planes; i++) {
u8 alignment = malidp_hw_get_pitch_align(mp->hwdev, rotated);
if (((fb->pitches[i] * drm_format_info_block_height(fb->format, i))
& (alignment - 1)) && !(fb->modifier)) {
DRM_DEBUG_KMS("Invalid pitch %u for plane %d\n",
fb->pitches[i], i);
return -EINVAL;
}
}
block_w = drm_format_info_block_width(fb->format, 0);
block_h = drm_format_info_block_height(fb->format, 0);
if (fb->width % block_w || fb->height % block_h) {
DRM_DEBUG_KMS("Buffer width/height needs to be a multiple of tile sizes");
return -EINVAL;
}
if ((state->src_x >> 16) % block_w || (state->src_y >> 16) % block_h) {
DRM_DEBUG_KMS("Plane src_x/src_y needs to be a multiple of tile sizes");
return -EINVAL;
}
if ((state->crtc_w > mp->hwdev->max_line_size) ||
(state->crtc_h > mp->hwdev->max_line_size) ||
(state->crtc_w < mp->hwdev->min_line_size) ||
(state->crtc_h < mp->hwdev->min_line_size))
return -EINVAL;
/*
* DP550/650 video layers can accept 3 plane formats only if
* fb->pitches[1] == fb->pitches[2] since they don't have a
* third plane stride register.
*/
if (ms->n_planes == 3 &&
!(mp->hwdev->hw->features & MALIDP_DEVICE_LV_HAS_3_STRIDES) &&
(state->fb->pitches[1] != state->fb->pitches[2]))
return -EINVAL;
ret = malidp_se_check_scaling(mp, state);
if (ret)
return ret;
/* validate the rotation constraints for each layer */
if (state->rotation != DRM_MODE_ROTATE_0) {
if (mp->layer->rot == ROTATE_NONE)
return -EINVAL;
if ((mp->layer->rot == ROTATE_COMPRESSED) && !(fb->modifier))
return -EINVAL;
/*
* packed RGB888 / BGR888 can't be rotated or flipped
* unless they are stored in a compressed way
*/
if ((fb->format->format == DRM_FORMAT_RGB888 ||
fb->format->format == DRM_FORMAT_BGR888) && !(fb->modifier))
return -EINVAL;
}
drm/arm/malidp:- Define a common list of AFBC format modifiers supported for DP500, DP550 and DP650 We need to define a common list of format modifiers supported by each of the Mali display processors. The following are the constraints with AFBC:- 1. AFBC is not supported for the formats defined in malidp_hw_format_is_linear_only() 2. Some of the formats are supported only with AFBC modifiers. Thus we have introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies the same. 3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format. 4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT. 5. CBR should not be set for non-subsampled formats. 6. SMART layer does not support framebuffer with AFBC modifiers. Return -EINVAL for such a scenario. 7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats. 8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT. However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT. This feature has been identified with MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT. 9. In DP550 and DP650, for YUYV, the hardware supports different format-ids to be used with and without AFBC modifier. We have used the feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this characteristic. 10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs which support SPLIT mode. 11. DP550 supports YUV420 with split mode. We have defined the feature 'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic. Changes since v1:- - Merged https://patchwork.freedesktop.org/patch/265215/ into this patch - As Liviu pointed out in the last patch, we can pull the checks outside of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop - Rebased Changes since v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
2018-07-17 19:11:09 +08:00
/* SMART layer does not support AFBC */
if (mp->layer->id == DE_SMART && fb->modifier) {
DRM_ERROR("AFBC framebuffer not supported in SMART layer");
return -EINVAL;
}
ms->rotmem_size = 0;
if (state->rotation & MALIDP_ROTATED_MASK) {
int val;
val = mp->hwdev->hw->rotmem_required(mp->hwdev, state->crtc_w,
state->crtc_h,
fb->format->format,
!!(fb->modifier));
if (val < 0)
return val;
ms->rotmem_size = val;
}
/* HW can't support plane + pixel blending */
if ((state->alpha != DRM_BLEND_ALPHA_OPAQUE) &&
(pixel_alpha != DRM_MODE_BLEND_PIXEL_NONE) &&
fb->format->has_alpha)
return -EINVAL;
malidp_de_prefetch_settings(mp, ms);
return 0;
}
static void malidp_de_set_plane_pitches(struct malidp_plane *mp,
int num_planes, unsigned int pitches[3])
{
int i;
int num_strides = num_planes;
if (!mp->layer->stride_offset)
return;
if (num_planes == 3)
num_strides = (mp->hwdev->hw->features &
MALIDP_DEVICE_LV_HAS_3_STRIDES) ? 3 : 2;
/*
* The drm convention for pitch is that it needs to cover width * cpp,
* but our hardware wants the pitch/stride to cover all rows included
* in a tile.
*/
for (i = 0; i < num_strides; ++i) {
unsigned int block_h = drm_format_info_block_height(mp->base.state->fb->format, i);
malidp_hw_write(mp->hwdev, pitches[i] * block_h,
mp->layer->base +
mp->layer->stride_offset + i * 4);
}
}
static const s16
malidp_yuv2rgb_coeffs[][DRM_COLOR_RANGE_MAX][MALIDP_COLORADJ_NUM_COEFFS] = {
[DRM_COLOR_YCBCR_BT601][DRM_COLOR_YCBCR_LIMITED_RANGE] = {
1192, 0, 1634,
1192, -401, -832,
1192, 2066, 0,
64, 512, 512
},
[DRM_COLOR_YCBCR_BT601][DRM_COLOR_YCBCR_FULL_RANGE] = {
1024, 0, 1436,
1024, -352, -731,
1024, 1815, 0,
0, 512, 512
},
[DRM_COLOR_YCBCR_BT709][DRM_COLOR_YCBCR_LIMITED_RANGE] = {
1192, 0, 1836,
1192, -218, -546,
1192, 2163, 0,
64, 512, 512
},
[DRM_COLOR_YCBCR_BT709][DRM_COLOR_YCBCR_FULL_RANGE] = {
1024, 0, 1613,
1024, -192, -479,
1024, 1900, 0,
0, 512, 512
},
[DRM_COLOR_YCBCR_BT2020][DRM_COLOR_YCBCR_LIMITED_RANGE] = {
1024, 0, 1476,
1024, -165, -572,
1024, 1884, 0,
0, 512, 512
},
[DRM_COLOR_YCBCR_BT2020][DRM_COLOR_YCBCR_FULL_RANGE] = {
1024, 0, 1510,
1024, -168, -585,
1024, 1927, 0,
0, 512, 512
}
};
static void malidp_de_set_color_encoding(struct malidp_plane *plane,
enum drm_color_encoding enc,
enum drm_color_range range)
{
unsigned int i;
for (i = 0; i < MALIDP_COLORADJ_NUM_COEFFS; i++) {
/* coefficients are signed, two's complement values */
malidp_hw_write(plane->hwdev, malidp_yuv2rgb_coeffs[enc][range][i],
plane->layer->base + plane->layer->yuv2rgb_offset +
i * 4);
}
}
static void malidp_de_set_mmu_control(struct malidp_plane *mp,
struct malidp_plane_state *ms)
{
u32 mmu_ctrl;
/* check hardware supports MMU prefetch */
if (!mp->layer->mmu_ctrl_offset)
return;
mmu_ctrl = malidp_calc_mmu_control_value(ms->mmu_prefetch_mode,
MALIDP_MMU_PREFETCH_READAHEAD,
ms->n_planes,
ms->mmu_prefetch_pgsize);
malidp_hw_write(mp->hwdev, mmu_ctrl,
mp->layer->base + mp->layer->mmu_ctrl_offset);
}
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 02:23:08 +08:00
static void malidp_set_plane_base_addr(struct drm_framebuffer *fb,
struct malidp_plane *mp,
int plane_index)
{
dma_addr_t paddr;
u16 ptr;
struct drm_plane *plane = &mp->base;
bool afbc = fb->modifier ? true : false;
ptr = mp->layer->ptr + (plane_index << 4);
/*
* drm_fb_cma_get_gem_addr() alters the physical base address of the
* framebuffer as per the plane's src_x, src_y co-ordinates (ie to
* take care of source cropping).
* For AFBC, this is not needed as the cropping is handled by _AD_CROP_H
* and _AD_CROP_V registers.
*/
if (!afbc) {
paddr = drm_fb_cma_get_gem_addr(fb, plane->state,
plane_index);
} else {
struct drm_gem_cma_object *obj;
obj = drm_fb_cma_get_gem_obj(fb, plane_index);
if (WARN_ON(!obj))
return;
paddr = obj->paddr;
}
malidp_hw_write(mp->hwdev, lower_32_bits(paddr), ptr);
malidp_hw_write(mp->hwdev, upper_32_bits(paddr), ptr + 4);
}
static void malidp_de_set_plane_afbc(struct drm_plane *plane)
{
struct malidp_plane *mp;
u32 src_w, src_h, val = 0, src_x, src_y;
struct drm_framebuffer *fb = plane->state->fb;
mp = to_malidp_plane(plane);
/* no afbc_decoder_offset means AFBC is not supported on this plane */
if (!mp->layer->afbc_decoder_offset)
return;
if (!fb->modifier) {
malidp_hw_write(mp->hwdev, 0, mp->layer->afbc_decoder_offset);
return;
}
/* convert src values from Q16 fixed point to integer */
src_w = plane->state->src_w >> 16;
src_h = plane->state->src_h >> 16;
src_x = plane->state->src_x >> 16;
src_y = plane->state->src_y >> 16;
val = ((fb->width - (src_x + src_w)) << MALIDP_AD_CROP_RIGHT_OFFSET) |
src_x;
malidp_hw_write(mp->hwdev, val,
mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_H);
val = ((fb->height - (src_y + src_h)) << MALIDP_AD_CROP_BOTTOM_OFFSET) |
src_y;
malidp_hw_write(mp->hwdev, val,
mp->layer->afbc_decoder_offset + MALIDP_AD_CROP_V);
val = MALIDP_AD_EN;
if (fb->modifier & AFBC_FORMAT_MOD_SPLIT)
val |= MALIDP_AD_BS;
if (fb->modifier & AFBC_FORMAT_MOD_YTR)
val |= MALIDP_AD_YTR;
malidp_hw_write(mp->hwdev, val, mp->layer->afbc_decoder_offset);
}
static void malidp_de_plane_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct malidp_plane *mp;
struct malidp_plane_state *ms = to_malidp_plane_state(plane->state);
struct drm_plane_state *state = plane->state;
u16 pixel_alpha = state->pixel_blend_mode;
u8 plane_alpha = state->alpha >> 8;
u32 src_w, src_h, dest_w, dest_h, val;
int i;
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 02:23:08 +08:00
struct drm_framebuffer *fb = plane->state->fb;
mp = to_malidp_plane(plane);
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 02:23:08 +08:00
/*
* For AFBC framebuffer, use the framebuffer width and height for
* configuring layer input size register.
*/
if (fb->modifier) {
src_w = fb->width;
src_h = fb->height;
} else {
/* convert src values from Q16 fixed point to integer */
src_w = state->src_w >> 16;
src_h = state->src_h >> 16;
}
dest_w = state->crtc_w;
dest_h = state->crtc_h;
val = malidp_hw_read(mp->hwdev, mp->layer->base);
val = (val & ~LAYER_FORMAT_MASK) | ms->format;
malidp_hw_write(mp->hwdev, val, mp->layer->base);
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 02:23:08 +08:00
for (i = 0; i < ms->n_planes; i++)
malidp_set_plane_base_addr(fb, mp, i);
malidp_de_set_mmu_control(mp, ms);
malidp_de_set_plane_pitches(mp, ms->n_planes,
state->fb->pitches);
if ((plane->state->color_encoding != old_state->color_encoding) ||
(plane->state->color_range != old_state->color_range))
malidp_de_set_color_encoding(mp, plane->state->color_encoding,
plane->state->color_range);
malidp_hw_write(mp->hwdev, LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
mp->layer->base + MALIDP_LAYER_SIZE);
malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h),
mp->layer->base + MALIDP_LAYER_COMP_SIZE);
malidp_hw_write(mp->hwdev, LAYER_H_VAL(state->crtc_x) |
LAYER_V_VAL(state->crtc_y),
mp->layer->base + MALIDP_LAYER_OFFSET);
if (mp->layer->id == DE_SMART) {
/*
* Enable the first rectangle in the SMART layer to be
* able to use it as a drm plane.
*/
malidp_hw_write(mp->hwdev, 1,
mp->layer->base + MALIDP550_LS_ENABLE);
malidp_hw_write(mp->hwdev,
LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
}
drm/arm/malidp: Set the AFBC register bits if the framebuffer has AFBC modifier Added the AFBC decoder registers for DP500 , DP550 and DP650. These registers control the processing of AFBC buffers. It controls various features like AFBC decoder enable, lossless transformation and block split as well as setting of the left, right, top and bottom cropping of AFBC buffers (in number of pixels). All the layers (except DE_SMART) support framebuffers with AFBC modifiers. One needs to set the pixel values of the top, left, bottom and right cropping for the AFBC framebuffer. Cropping an AFBC framebuffer is controlled by the AFBC crop registers. In that case, the layer input size registers should be configured with framebuffer's dimensions and not with drm_plane_state source width/height values (which is used for non AFBC framebuffer to denote cropping). Changes from v1: - Removed the "if (fb->modifier)" check from malidp_de_plane_update() and added it in malidp_de_set_plane_afbc(). This will consolidate all the AFBC specific register configurations in a single function ie malidp_de_set_plane_afbc(). Changes from v2: - For AFBC framebuffer, layer input size register should be set to framebuffer's width and height. Changes from v3: - Rebased on top of latest drm-misc-next - Some cleanups/sanity changes based on Liviu's comments Changes from v3 (series): - Added the ack - Rebased on the latest drm-misc-next Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
2018-05-17 02:23:08 +08:00
malidp_de_set_plane_afbc(plane);
/* first clear the rotation bits */
val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
val &= ~LAYER_ROT_MASK;
/* setup the rotation and axis flip bits */
if (state->rotation & DRM_MODE_ROTATE_MASK)
val |= ilog2(plane->state->rotation & DRM_MODE_ROTATE_MASK) <<
LAYER_ROT_OFFSET;
if (state->rotation & DRM_MODE_REFLECT_X)
val |= LAYER_H_FLIP;
if (state->rotation & DRM_MODE_REFLECT_Y)
val |= LAYER_V_FLIP;
val &= ~(LAYER_COMP_MASK | LAYER_PMUL_ENABLE | LAYER_ALPHA(0xff));
if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) {
val |= LAYER_COMP_PLANE;
} else if (state->fb->format->has_alpha) {
/* We only care about blend mode if the format has alpha */
switch (pixel_alpha) {
case DRM_MODE_BLEND_PREMULTI:
val |= LAYER_COMP_PIXEL | LAYER_PMUL_ENABLE;
break;
case DRM_MODE_BLEND_COVERAGE:
val |= LAYER_COMP_PIXEL;
break;
}
}
val |= LAYER_ALPHA(plane_alpha);
val &= ~LAYER_FLOWCFG(LAYER_FLOWCFG_MASK);
if (state->crtc) {
struct malidp_crtc_state *m =
to_malidp_crtc_state(state->crtc->state);
if (m->scaler_config.scale_enable &&
m->scaler_config.plane_src_id == mp->layer->id)
val |= LAYER_FLOWCFG(LAYER_FLOWCFG_SCALE_SE);
}
/* set the 'enable layer' bit */
val |= LAYER_ENABLE;
malidp_hw_write(mp->hwdev, val,
mp->layer->base + MALIDP_LAYER_CONTROL);
}
static void malidp_de_plane_disable(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct malidp_plane *mp = to_malidp_plane(plane);
malidp_hw_clearbits(mp->hwdev,
LAYER_ENABLE | LAYER_FLOWCFG(LAYER_FLOWCFG_MASK),
mp->layer->base + MALIDP_LAYER_CONTROL);
}
static const struct drm_plane_helper_funcs malidp_de_plane_helper_funcs = {
.atomic_check = malidp_de_plane_check,
.atomic_update = malidp_de_plane_update,
.atomic_disable = malidp_de_plane_disable,
};
int malidp_de_planes_init(struct drm_device *drm)
{
struct malidp_drm *malidp = drm->dev_private;
const struct malidp_hw_regmap *map = &malidp->dev->hw->map;
struct malidp_plane *plane = NULL;
enum drm_plane_type plane_type;
unsigned long crtcs = 1 << drm->mode_config.num_crtc;
unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
BIT(DRM_MODE_BLEND_PREMULTI) |
BIT(DRM_MODE_BLEND_COVERAGE);
u32 *formats;
int ret, i = 0, j = 0, n;
u64 supported_modifiers[MODIFIERS_COUNT_MAX];
const u64 *modifiers;
modifiers = malidp_format_modifiers;
if (!(map->features & MALIDP_DEVICE_AFBC_SUPPORT_SPLIT)) {
/*
* Since our hardware does not support SPLIT, so build the list
* of supported modifiers excluding SPLIT ones.
*/
while (*modifiers != DRM_FORMAT_MOD_INVALID) {
if (!(*modifiers & AFBC_SPLIT))
supported_modifiers[j++] = *modifiers;
modifiers++;
}
supported_modifiers[j++] = DRM_FORMAT_MOD_INVALID;
modifiers = supported_modifiers;
}
formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL);
if (!formats) {
ret = -ENOMEM;
goto cleanup;
}
for (i = 0; i < map->n_layers; i++) {
u8 id = map->layers[i].id;
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
if (!plane) {
ret = -ENOMEM;
goto cleanup;
}
/* build the list of DRM supported formats based on the map */
for (n = 0, j = 0; j < map->n_pixel_formats; j++) {
if ((map->pixel_formats[j].layer & id) == id)
formats[n++] = map->pixel_formats[j].format;
}
plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
DRM_PLANE_TYPE_OVERLAY;
/*
* All the layers except smart layer supports AFBC modifiers.
*/
ret = drm_universal_plane_init(drm, &plane->base, crtcs,
&malidp_de_plane_funcs, formats, n,
(id == DE_SMART) ? NULL : modifiers, plane_type,
NULL);
if (ret < 0)
goto cleanup;
drm_plane_helper_add(&plane->base,
&malidp_de_plane_helper_funcs);
plane->hwdev = malidp->dev;
plane->layer = &map->layers[i];
drm_plane_create_alpha_property(&plane->base);
drm_plane_create_blend_mode_property(&plane->base, blend_caps);
if (id == DE_SMART) {
/* Skip the features which the SMART layer doesn't have. */
continue;
}
drm_plane_create_rotation_property(&plane->base, DRM_MODE_ROTATE_0, flags);
malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
plane->layer->base + MALIDP_LAYER_COMPOSE);
/* Attach the YUV->RGB property only to video layers */
if (id & (DE_VIDEO1 | DE_VIDEO2)) {
/* default encoding for YUV->RGB is BT601 NARROW */
enum drm_color_encoding enc = DRM_COLOR_YCBCR_BT601;
enum drm_color_range range = DRM_COLOR_YCBCR_LIMITED_RANGE;
ret = drm_plane_create_color_properties(&plane->base,
BIT(DRM_COLOR_YCBCR_BT601) | \
BIT(DRM_COLOR_YCBCR_BT709) | \
BIT(DRM_COLOR_YCBCR_BT2020),
BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | \
BIT(DRM_COLOR_YCBCR_FULL_RANGE),
enc, range);
if (!ret)
/* program the HW registers */
malidp_de_set_color_encoding(plane, enc, range);
else
DRM_WARN("Failed to create video layer %d color properties\n", id);
}
}
kfree(formats);
return 0;
cleanup:
kfree(formats);
return ret;
}