OpenCloudOS-Kernel/drivers/block/ps3disk.c

590 lines
14 KiB
C
Raw Normal View History

/*
* PS3 Disk Storage Driver
*
* Copyright (C) 2007 Sony Computer Entertainment Inc.
* Copyright 2007 Sony Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published
* by the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/ata.h>
#include <linux/blkdev.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
#include <asm/firmware.h>
#define DEVICE_NAME "ps3disk"
#define BOUNCE_SIZE (64*1024)
#define PS3DISK_MAX_DISKS 16
#define PS3DISK_MINORS 16
#define PS3DISK_NAME "ps3d%c"
struct ps3disk_private {
spinlock_t lock; /* Request queue spinlock */
struct request_queue *queue;
struct gendisk *gendisk;
unsigned int blocking_factor;
struct request *req;
u64 raw_capacity;
unsigned char model[ATA_ID_PROD_LEN+1];
};
#define LV1_STORAGE_SEND_ATA_COMMAND (2)
#define LV1_STORAGE_ATA_HDDOUT (0x23)
struct lv1_ata_cmnd_block {
u16 features;
u16 sector_count;
u16 LBA_low;
u16 LBA_mid;
u16 LBA_high;
u8 device;
u8 command;
u32 is_ext;
u32 proto;
u32 in_out;
u32 size;
u64 buffer;
u32 arglen;
};
enum lv1_ata_proto {
NON_DATA_PROTO = 0,
PIO_DATA_IN_PROTO = 1,
PIO_DATA_OUT_PROTO = 2,
DMA_PROTO = 3
};
enum lv1_ata_in_out {
DIR_WRITE = 0, /* memory -> device */
DIR_READ = 1 /* device -> memory */
};
static int ps3disk_major;
static const struct block_device_operations ps3disk_fops = {
.owner = THIS_MODULE,
};
static void ps3disk_scatter_gather(struct ps3_storage_device *dev,
struct request *req, int gather)
{
unsigned int offset = 0;
struct req_iterator iter;
struct bio_vec *bvec;
unsigned int i = 0;
size_t size;
void *buf;
rq_for_each_segment(bvec, req, iter) {
unsigned long flags;
dev_dbg(&dev->sbd.core,
"%s:%u: bio %u: %u segs %u sectors from %lu\n",
__func__, __LINE__, i, bio_segments(iter.bio),
bio_sectors(iter.bio), iter.bio->bi_sector);
size = bvec->bv_len;
buf = bvec_kmap_irq(bvec, &flags);
if (gather)
memcpy(dev->bounce_buf+offset, buf, size);
else
memcpy(buf, dev->bounce_buf+offset, size);
offset += size;
flush_kernel_dcache_page(bvec->bv_page);
bvec_kunmap_irq(buf, &flags);
i++;
}
}
static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
struct request *req)
{
struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
int write = rq_data_dir(req), res;
const char *op = write ? "write" : "read";
u64 start_sector, sectors;
unsigned int region_id = dev->regions[dev->region_idx].id;
#ifdef DEBUG
unsigned int n = 0;
struct bio_vec *bv;
struct req_iterator iter;
rq_for_each_segment(bv, req, iter)
n++;
dev_dbg(&dev->sbd.core,
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 21:24:39 +08:00
"%s:%u: %s req has %u bvecs for %u sectors\n",
__func__, __LINE__, op, n, blk_rq_sectors(req));
#endif
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 21:24:39 +08:00
start_sector = blk_rq_pos(req) * priv->blocking_factor;
sectors = blk_rq_sectors(req) * priv->blocking_factor;
dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
__func__, __LINE__, op, sectors, start_sector);
if (write) {
ps3disk_scatter_gather(dev, req, 1);
res = lv1_storage_write(dev->sbd.dev_id, region_id,
start_sector, sectors, 0,
dev->bounce_lpar, &dev->tag);
} else {
res = lv1_storage_read(dev->sbd.dev_id, region_id,
start_sector, sectors, 0,
dev->bounce_lpar, &dev->tag);
}
if (res) {
dev_err(&dev->sbd.core, "%s:%u: %s failed %d\n", __func__,
__LINE__, op, res);
__blk_end_request_all(req, -EIO);
return 0;
}
priv->req = req;
return 1;
}
static int ps3disk_submit_flush_request(struct ps3_storage_device *dev,
struct request *req)
{
struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
u64 res;
dev_dbg(&dev->sbd.core, "%s:%u: flush request\n", __func__, __LINE__);
res = lv1_storage_send_device_command(dev->sbd.dev_id,
LV1_STORAGE_ATA_HDDOUT, 0, 0, 0,
0, &dev->tag);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
__func__, __LINE__, res);
__blk_end_request_all(req, -EIO);
return 0;
}
priv->req = req;
return 1;
}
static void ps3disk_do_request(struct ps3_storage_device *dev,
struct request_queue *q)
{
struct request *req;
dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__);
block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:16 +08:00
while ((req = blk_fetch_request(q))) {
if (req->cmd_flags & REQ_FLUSH) {
if (ps3disk_submit_flush_request(dev, req))
break;
} else if (req->cmd_type == REQ_TYPE_FS) {
if (ps3disk_submit_request_sg(dev, req))
break;
} else {
blk_dump_rq_flags(req, DEVICE_NAME " bad request");
__blk_end_request_all(req, -EIO);
continue;
}
}
}
static void ps3disk_request(struct request_queue *q)
{
struct ps3_storage_device *dev = q->queuedata;
struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
if (priv->req) {
dev_dbg(&dev->sbd.core, "%s:%u busy\n", __func__, __LINE__);
return;
}
ps3disk_do_request(dev, q);
}
static irqreturn_t ps3disk_interrupt(int irq, void *data)
{
struct ps3_storage_device *dev = data;
struct ps3disk_private *priv;
struct request *req;
int res, read, error;
u64 tag, status;
const char *op;
res = lv1_storage_get_async_status(dev->sbd.dev_id, &tag, &status);
if (tag != dev->tag)
dev_err(&dev->sbd.core,
"%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
__func__, __LINE__, res, status);
return IRQ_HANDLED;
}
priv = ps3_system_bus_get_drvdata(&dev->sbd);
req = priv->req;
if (!req) {
dev_dbg(&dev->sbd.core,
"%s:%u non-block layer request completed\n", __func__,
__LINE__);
dev->lv1_status = status;
complete(&dev->done);
return IRQ_HANDLED;
}
if (req->cmd_flags & REQ_FLUSH) {
read = 0;
op = "flush";
} else {
read = !rq_data_dir(req);
op = read ? "read" : "write";
}
if (status) {
dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
__LINE__, op, status);
error = -EIO;
} else {
dev_dbg(&dev->sbd.core, "%s:%u: %s completed\n", __func__,
__LINE__, op);
error = 0;
if (read)
ps3disk_scatter_gather(dev, req, 0);
}
spin_lock(&priv->lock);
__blk_end_request_all(req, error);
priv->req = NULL;
ps3disk_do_request(dev, priv->queue);
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
static int ps3disk_sync_cache(struct ps3_storage_device *dev)
{
u64 res;
dev_dbg(&dev->sbd.core, "%s:%u: sync cache\n", __func__, __LINE__);
res = ps3stor_send_command(dev, LV1_STORAGE_ATA_HDDOUT, 0, 0, 0, 0);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
__func__, __LINE__, res);
return -EIO;
}
return 0;
}
/* ATA helpers copied from drivers/ata/libata-core.c */
static void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
#ifdef __BIG_ENDIAN
unsigned int i;
for (i = 0; i < buf_words; i++)
buf[i] = le16_to_cpu(buf[i]);
#endif /* __BIG_ENDIAN */
}
static u64 ata_id_n_sectors(const u16 *id)
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
return ata_id_u64(id, 100);
else
return ata_id_u32(id, 60);
} else {
if (ata_id_current_chs_valid(id))
return ata_id_u32(id, 57);
else
return id[1] * id[3] * id[6];
}
}
static void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs,
unsigned int len)
{
unsigned int c;
while (len > 0) {
c = id[ofs] >> 8;
*s = c;
s++;
c = id[ofs] & 0xff;
*s = c;
s++;
ofs++;
len -= 2;
}
}
static void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs,
unsigned int len)
{
unsigned char *p;
WARN_ON(!(len & 1));
ata_id_string(id, s, ofs, len - 1);
p = s + strnlen(s, len - 1);
while (p > s && p[-1] == ' ')
p--;
*p = '\0';
}
static int ps3disk_identify(struct ps3_storage_device *dev)
{
struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
struct lv1_ata_cmnd_block ata_cmnd;
u16 *id = dev->bounce_buf;
u64 res;
dev_dbg(&dev->sbd.core, "%s:%u: identify disk\n", __func__, __LINE__);
memset(&ata_cmnd, 0, sizeof(struct lv1_ata_cmnd_block));
ata_cmnd.command = ATA_CMD_ID_ATA;
ata_cmnd.sector_count = 1;
ata_cmnd.size = ata_cmnd.arglen = ATA_ID_WORDS * 2;
ata_cmnd.buffer = dev->bounce_lpar;
ata_cmnd.proto = PIO_DATA_IN_PROTO;
ata_cmnd.in_out = DIR_READ;
res = ps3stor_send_command(dev, LV1_STORAGE_SEND_ATA_COMMAND,
ps3_mm_phys_to_lpar(__pa(&ata_cmnd)),
sizeof(ata_cmnd), ata_cmnd.buffer,
ata_cmnd.arglen);
if (res) {
dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%llx\n",
__func__, __LINE__, res);
return -EIO;
}
swap_buf_le16(id, ATA_ID_WORDS);
/* All we're interested in are raw capacity and model name */
priv->raw_capacity = ata_id_n_sectors(id);
ata_id_c_string(id, priv->model, ATA_ID_PROD, sizeof(priv->model));
return 0;
}
static unsigned long ps3disk_mask;
static DEFINE_MUTEX(ps3disk_mask_mutex);
static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
{
struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
struct ps3disk_private *priv;
int error;
unsigned int devidx;
struct request_queue *queue;
struct gendisk *gendisk;
if (dev->blk_size < 512) {
dev_err(&dev->sbd.core,
"%s:%u: cannot handle block size %llu\n", __func__,
__LINE__, dev->blk_size);
return -EINVAL;
}
BUILD_BUG_ON(PS3DISK_MAX_DISKS > BITS_PER_LONG);
mutex_lock(&ps3disk_mask_mutex);
devidx = find_first_zero_bit(&ps3disk_mask, PS3DISK_MAX_DISKS);
if (devidx >= PS3DISK_MAX_DISKS) {
dev_err(&dev->sbd.core, "%s:%u: Too many disks\n", __func__,
__LINE__);
mutex_unlock(&ps3disk_mask_mutex);
return -ENOSPC;
}
__set_bit(devidx, &ps3disk_mask);
mutex_unlock(&ps3disk_mask_mutex);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
error = -ENOMEM;
goto fail;
}
ps3_system_bus_set_drvdata(_dev, priv);
spin_lock_init(&priv->lock);
dev->bounce_size = BOUNCE_SIZE;
dev->bounce_buf = kmalloc(BOUNCE_SIZE, GFP_DMA);
if (!dev->bounce_buf) {
error = -ENOMEM;
goto fail_free_priv;
}
error = ps3stor_setup(dev, ps3disk_interrupt);
if (error)
goto fail_free_bounce;
ps3disk_identify(dev);
queue = blk_init_queue(ps3disk_request, &priv->lock);
if (!queue) {
dev_err(&dev->sbd.core, "%s:%u: blk_init_queue failed\n",
__func__, __LINE__);
error = -ENOMEM;
goto fail_teardown;
}
priv->queue = queue;
queue->queuedata = dev;
blk_queue_bounce_limit(queue, BLK_BOUNCE_HIGH);
blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9);
blk_queue_segment_boundary(queue, -1UL);
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
blk_queue_flush(queue, REQ_FLUSH);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
gendisk = alloc_disk(PS3DISK_MINORS);
if (!gendisk) {
dev_err(&dev->sbd.core, "%s:%u: alloc_disk failed\n", __func__,
__LINE__);
error = -ENOMEM;
goto fail_cleanup_queue;
}
priv->gendisk = gendisk;
gendisk->major = ps3disk_major;
gendisk->first_minor = devidx * PS3DISK_MINORS;
gendisk->fops = &ps3disk_fops;
gendisk->queue = queue;
gendisk->private_data = dev;
gendisk->driverfs_dev = &dev->sbd.core;
snprintf(gendisk->disk_name, sizeof(gendisk->disk_name), PS3DISK_NAME,
devidx+'a');
priv->blocking_factor = dev->blk_size >> 9;
set_capacity(gendisk,
dev->regions[dev->region_idx].size*priv->blocking_factor);
dev_info(&dev->sbd.core,
"%s is a %s (%llu MiB total, %lu MiB for OtherOS)\n",
gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
get_capacity(gendisk) >> 11);
add_disk(gendisk);
return 0;
fail_cleanup_queue:
blk_cleanup_queue(queue);
fail_teardown:
ps3stor_teardown(dev);
fail_free_bounce:
kfree(dev->bounce_buf);
fail_free_priv:
kfree(priv);
ps3_system_bus_set_drvdata(_dev, NULL);
fail:
mutex_lock(&ps3disk_mask_mutex);
__clear_bit(devidx, &ps3disk_mask);
mutex_unlock(&ps3disk_mask_mutex);
return error;
}
static int ps3disk_remove(struct ps3_system_bus_device *_dev)
{
struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
mutex_lock(&ps3disk_mask_mutex);
__clear_bit(MINOR(disk_devt(priv->gendisk)) / PS3DISK_MINORS,
&ps3disk_mask);
mutex_unlock(&ps3disk_mask_mutex);
del_gendisk(priv->gendisk);
blk_cleanup_queue(priv->queue);
put_disk(priv->gendisk);
dev_notice(&dev->sbd.core, "Synchronizing disk cache\n");
ps3disk_sync_cache(dev);
ps3stor_teardown(dev);
kfree(dev->bounce_buf);
kfree(priv);
ps3_system_bus_set_drvdata(_dev, NULL);
return 0;
}
static struct ps3_system_bus_driver ps3disk = {
.match_id = PS3_MATCH_ID_STOR_DISK,
.core.name = DEVICE_NAME,
.core.owner = THIS_MODULE,
.probe = ps3disk_probe,
.remove = ps3disk_remove,
.shutdown = ps3disk_remove,
};
static int __init ps3disk_init(void)
{
int error;
if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
return -ENODEV;
error = register_blkdev(0, DEVICE_NAME);
if (error <= 0) {
printk(KERN_ERR "%s:%u: register_blkdev failed %d\n", __func__,
__LINE__, error);
return error;
}
ps3disk_major = error;
pr_info("%s:%u: registered block device major %d\n", __func__,
__LINE__, ps3disk_major);
error = ps3_system_bus_driver_register(&ps3disk);
if (error)
unregister_blkdev(ps3disk_major, DEVICE_NAME);
return error;
}
static void __exit ps3disk_exit(void)
{
ps3_system_bus_driver_unregister(&ps3disk);
unregister_blkdev(ps3disk_major, DEVICE_NAME);
}
module_init(ps3disk_init);
module_exit(ps3disk_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PS3 Disk Storage Driver");
MODULE_AUTHOR("Sony Corporation");
MODULE_ALIAS(PS3_MODULE_ALIAS_STOR_DISK);