OpenCloudOS-Kernel/drivers/pnp/pnpacpi/core.c

293 lines
7.7 KiB
C
Raw Normal View History

/*
* pnpacpi -- PnP ACPI driver
*
* Copyright (c) 2004 Matthieu Castet <castet.matthieu@free.fr>
* Copyright (c) 2004 Li Shaohua <shaohua.li@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/mod_devicetable.h>
#include <acpi/acpi_bus.h>
#include "../base.h"
#include "pnpacpi.h"
static int num = 0;
/* We need only to blacklist devices that have already an acpi driver that
* can't use pnp layer. We don't need to blacklist device that are directly
* used by the kernel (PCI root, ...), as it is harmless and there were
* already present in pnpbios. But there is an exception for devices that
* have irqs (PIC, Timer) because we call acpi_register_gsi.
* Finally, only devices that have a CRS method need to be in this list.
*/
static struct acpi_device_id excluded_id_list[] __initdata = {
{"PNP0C09", 0}, /* EC */
{"PNP0C0F", 0}, /* Link device */
{"PNP0000", 0}, /* PIC */
{"PNP0100", 0}, /* Timer */
{"", 0},
};
static inline int __init is_exclusive_device(struct acpi_device *dev)
{
return (!acpi_match_device_ids(dev, excluded_id_list));
}
/*
* Compatible Device IDs
*/
#define TEST_HEX(c) \
if (!(('0' <= (c) && (c) <= '9') || ('A' <= (c) && (c) <= 'F'))) \
return 0
#define TEST_ALPHA(c) \
if (!('@' <= (c) || (c) <= 'Z')) \
return 0
static int __init ispnpidacpi(char *id)
{
TEST_ALPHA(id[0]);
TEST_ALPHA(id[1]);
TEST_ALPHA(id[2]);
TEST_HEX(id[3]);
TEST_HEX(id[4]);
TEST_HEX(id[5]);
TEST_HEX(id[6]);
if (id[7] != '\0')
return 0;
return 1;
}
static int pnpacpi_get_resources(struct pnp_dev *dev)
{
pnp_dbg(&dev->dev, "get resources\n");
return pnpacpi_parse_allocated_resource(dev);
}
static int pnpacpi_set_resources(struct pnp_dev *dev)
{
acpi_handle handle = dev->data;
struct acpi_buffer buffer;
int ret;
pnp_dbg(&dev->dev, "set resources\n");
ret = pnpacpi_build_resource_template(dev, &buffer);
if (ret)
return ret;
ret = pnpacpi_encode_resources(dev, &buffer);
if (ret) {
kfree(buffer.pointer);
return ret;
}
Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31 01:31:06 +08:00
if (ACPI_FAILURE(acpi_set_current_resources(handle, &buffer)))
ret = -EINVAL;
Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31 01:31:06 +08:00
else if (acpi_bus_power_manageable(handle))
ret = acpi_bus_set_power(handle, ACPI_STATE_D0);
kfree(buffer.pointer);
return ret;
}
static int pnpacpi_disable_resources(struct pnp_dev *dev)
{
Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31 01:31:06 +08:00
acpi_handle handle = dev->data;
int ret;
dev_dbg(&dev->dev, "disable resources\n");
/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31 01:31:06 +08:00
ret = 0;
if (acpi_bus_power_manageable(handle))
acpi_bus_set_power(handle, ACPI_STATE_D3);
/* continue even if acpi_bus_set_power() fails */
Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31 01:31:06 +08:00
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
ret = -ENODEV;
return ret;
}
#ifdef CONFIG_ACPI_SLEEP
static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
{
int power_state;
power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
if (power_state < 0)
power_state = (state.event == PM_EVENT_ON) ?
ACPI_STATE_D0 : ACPI_STATE_D3;
return acpi_bus_set_power((acpi_handle) dev->data, power_state);
}
static int pnpacpi_resume(struct pnp_dev *dev)
{
return acpi_bus_set_power((acpi_handle) dev->data, ACPI_STATE_D0);
}
#endif
[PATCH] drivers/pnp/: cleanups This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global function: - core.c: pnp_remove_device - #if 0 the following unneeded EXPORT_SYMBOL's: - card.c: pnp_add_card - card.c: pnp_remove_card - card.c: pnp_add_card_device - card.c: pnp_remove_card_device - card.c: pnp_add_card_id - core.c: pnp_register_protocol - core.c: pnp_unregister_protocol - core.c: pnp_add_device - core.c: pnp_remove_device - pnpacpi/core.c: pnpacpi_protocol - driver.c: pnp_add_id - isapnp/core.c: isapnp_read_byte - manager.c: pnp_auto_config_dev - resource.c: pnp_register_dependent_option - resource.c: pnp_register_independent_option - resource.c: pnp_register_irq_resource - resource.c: pnp_register_dma_resource - resource.c: pnp_register_port_resource - resource.c: pnp_register_mem_resource Note that this patch #if 0's exactly one functions and removes no functions. Most it does is the #if 0 of EXPORT_SYMBOL's, so if any modular code will use any of them, re-adding will be trivial. Modular ISAPnP might be interesting in some cases, but this is more legacy code. If someone would work on it to sort all the issues out (starting with the point that most users of __ISAPNP__ will have to be fixed) re-enabling the required EXPORT_SYMBOL's won't be hard for him. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 17:01:48 +08:00
static struct pnp_protocol pnpacpi_protocol = {
.name = "Plug and Play ACPI",
.get = pnpacpi_get_resources,
.set = pnpacpi_set_resources,
.disable = pnpacpi_disable_resources,
#ifdef CONFIG_ACPI_SLEEP
.suspend = pnpacpi_suspend,
.resume = pnpacpi_resume,
#endif
};
static int __init pnpacpi_add_device(struct acpi_device *device)
{
acpi_handle temp = NULL;
acpi_status status;
struct pnp_dev *dev;
/*
* If a PnPacpi device is not present , the device
* driver should not be loaded.
*/
status = acpi_get_handle(device->handle, "_CRS", &temp);
if (ACPI_FAILURE(status) || !ispnpidacpi(acpi_device_hid(device)) ||
is_exclusive_device(device) || (!device->status.present))
return 0;
dev = pnp_alloc_dev(&pnpacpi_protocol, num, acpi_device_hid(device));
if (!dev)
return -ENOMEM;
dev->data = device->handle;
/* .enabled means the device can decode the resources */
dev->active = device->status.enabled;
status = acpi_get_handle(device->handle, "_SRS", &temp);
if (ACPI_SUCCESS(status))
dev->capabilities |= PNP_CONFIGURABLE;
dev->capabilities |= PNP_READ;
if (device->flags.dynamic_status && (dev->capabilities & PNP_CONFIGURABLE))
dev->capabilities |= PNP_WRITE;
if (device->flags.removable)
dev->capabilities |= PNP_REMOVABLE;
status = acpi_get_handle(device->handle, "_DIS", &temp);
if (ACPI_SUCCESS(status))
dev->capabilities |= PNP_DISABLE;
if (strlen(acpi_device_name(device)))
strncpy(dev->name, acpi_device_name(device), sizeof(dev->name));
else
strncpy(dev->name, acpi_device_bid(device), sizeof(dev->name));
if (dev->active)
pnpacpi_parse_allocated_resource(dev);
if (dev->capabilities & PNP_CONFIGURABLE)
pnpacpi_parse_resource_option_data(dev);
if (device->flags.compatible_ids) {
struct acpica_device_id_list *cid_list = device->pnp.cid_list;
int i;
for (i = 0; i < cid_list->count; i++) {
if (!ispnpidacpi(cid_list->ids[i].string))
continue;
pnp_add_id(dev, cid_list->ids[i].string);
}
}
/* clear out the damaged flags */
if (!dev->active)
pnp_init_resources(dev);
pnp_add_device(dev);
num++;
return AE_OK;
}
static acpi_status __init pnpacpi_add_device_handler(acpi_handle handle,
u32 lvl, void *context,
void **rv)
{
struct acpi_device *device;
if (!acpi_bus_get_device(handle, &device))
pnpacpi_add_device(device);
else
return AE_CTRL_DEPTH;
return AE_OK;
}
static int __init acpi_pnp_match(struct device *dev, void *_pnp)
{
struct acpi_device *acpi = to_acpi_device(dev);
struct pnp_dev *pnp = _pnp;
/* true means it matched */
return acpi->flags.hardware_id
&& !acpi_get_physical_device(acpi->handle)
&& compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
}
static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)
{
struct device *adev;
struct acpi_device *acpi;
adev = bus_find_device(&acpi_bus_type, NULL,
to_pnp_dev(dev), acpi_pnp_match);
if (!adev)
return -ENODEV;
acpi = to_acpi_device(adev);
*handle = acpi->handle;
put_device(adev);
return 0;
}
/* complete initialization of a PNPACPI device includes having
* pnpdev->dev.archdata.acpi_handle point to its ACPI sibling.
*/
static struct acpi_bus_type __initdata acpi_pnp_bus = {
.bus = &pnp_bus_type,
.find_device = acpi_pnp_find_device,
};
int pnpacpi_disabled __initdata;
[PATCH] drivers/pnp/: cleanups This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global function: - core.c: pnp_remove_device - #if 0 the following unneeded EXPORT_SYMBOL's: - card.c: pnp_add_card - card.c: pnp_remove_card - card.c: pnp_add_card_device - card.c: pnp_remove_card_device - card.c: pnp_add_card_id - core.c: pnp_register_protocol - core.c: pnp_unregister_protocol - core.c: pnp_add_device - core.c: pnp_remove_device - pnpacpi/core.c: pnpacpi_protocol - driver.c: pnp_add_id - isapnp/core.c: isapnp_read_byte - manager.c: pnp_auto_config_dev - resource.c: pnp_register_dependent_option - resource.c: pnp_register_independent_option - resource.c: pnp_register_irq_resource - resource.c: pnp_register_dma_resource - resource.c: pnp_register_port_resource - resource.c: pnp_register_mem_resource Note that this patch #if 0's exactly one functions and removes no functions. Most it does is the #if 0 of EXPORT_SYMBOL's, so if any modular code will use any of them, re-adding will be trivial. Modular ISAPnP might be interesting in some cases, but this is more legacy code. If someone would work on it to sort all the issues out (starting with the point that most users of __ISAPNP__ will have to be fixed) re-enabling the required EXPORT_SYMBOL's won't be hard for him. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 17:01:48 +08:00
static int __init pnpacpi_init(void)
{
if (acpi_disabled || pnpacpi_disabled) {
printk(KERN_INFO "pnp: PnP ACPI: disabled\n");
return 0;
}
printk(KERN_INFO "pnp: PnP ACPI init\n");
pnp_register_protocol(&pnpacpi_protocol);
register_acpi_bus_type(&acpi_pnp_bus);
acpi_get_devices(NULL, pnpacpi_add_device_handler, NULL, NULL);
printk(KERN_INFO "pnp: PnP ACPI: found %d devices\n", num);
unregister_acpi_bus_type(&acpi_pnp_bus);
PNP: notice whether we have PNP devices (PNPBIOS or PNPACPI) This series converts i386 and x86_64 legacy serial ports to be platform devices and prevents probing for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp. This also prevents the serial driver from claiming IRDA devices (unless they have a UART PNP ID). The serial legacy probe sometimes assumed the wrong IRQ, so the user had to use "setserial" to fix it. Removing the need for setserial to make IRDA devices work seems good, but it does break some things. In particular, you may need to keep setserial from poking legacy UART stuff back in by doing something like "dpkg-reconfigure setserial" with the "kernel" option. Otherwise, the setserial-discovered "UART" will claim resources and prevent the IRDA driver from loading. This patch: If we can discover devices using PNP, we can skip some legacy probes. This flag ("pnp_platform_devices") indicates that PNPBIOS or PNPACPI is enabled and should tell us about builtin devices. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 15:35:54 +08:00
pnp_platform_devices = 1;
return 0;
}
fs_initcall(pnpacpi_init);
static int __init pnpacpi_setup(char *str)
{
if (str == NULL)
return 1;
if (!strncmp(str, "off", 3))
pnpacpi_disabled = 1;
return 1;
}
__setup("pnpacpi=", pnpacpi_setup);