OpenCloudOS-Kernel/drivers/thunderbolt/eeprom.c

595 lines
13 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Thunderbolt driver - eeprom access
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
* Copyright (C) 2018, Intel Corporation
*/
#include <linux/crc32.h>
thunderbolt: Use Device ROM retrieved from EFI Macs with Thunderbolt 1 do not have a unit-specific DROM: The DROM is empty with uid 0x1000000000000. (Apple started factory-burning a unit- specific DROM with Thunderbolt 2.) Instead, the NHI EFI driver supplies a DROM in a device property. Use it if available. It's only available when booting with the efistub. If it's not available, silently fall back to our hardcoded DROM. The size of the DROM is always 256 bytes. The number is hardcoded into the NHI EFI driver. This commit can deal with an arbitrary size however, just in case they ever change that. Background information: The EFI firmware volume contains ROM files for the NHI, GMUX and several other chips as well as key material. This strategy allows Apple to deploy ROM or key updates by simply publishing an EFI firmware update on their website. Drivers do not access those files directly but rather through a file server via EFI protocol AC5E4829-A8FD-440B-AF33-9FFE013B12D8. Files are identified by GUID, the NHI DROM has 339370BD-CFC6-4454-8EF7-704653120818. The NHI EFI driver amends that file with a unit-specific uid. The uid has 64 bit but its entropy is much lower: 24 bit represent the model, 24 bit are taken from a serial number, 16 bit are fixed. The NHI EFI driver obtains the serial number via the DataHub protocol, copies it into the DROM, calculates the CRC and submits the result as a device property. A modification is needed in the resume code where we currently read the uid of all switches in the hierarchy to detect plug events that occurred during sleep. On Thunderbolt 1 root switches this will now lead to a mismatch between the uid of the empty DROM and the EFI DROM. Exempt the root switch from this check: It's built in, so the uid should never change. However we continue to *read* the uid of the root switch, this seems like a good way to test its reachability after resume. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Andreas Noever <andreas.noever@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Vilaça <reverser@put.as> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-10-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-13 05:32:37 +08:00
#include <linux/property.h>
#include <linux/slab.h>
#include "tb.h"
/**
* tb_eeprom_ctl_write() - write control word
*/
static int tb_eeprom_ctl_write(struct tb_switch *sw, struct tb_eeprom_ctl *ctl)
{
return tb_sw_write(sw, ctl, TB_CFG_SWITCH, sw->cap_plug_events + 4, 1);
}
/**
* tb_eeprom_ctl_write() - read control word
*/
static int tb_eeprom_ctl_read(struct tb_switch *sw, struct tb_eeprom_ctl *ctl)
{
return tb_sw_read(sw, ctl, TB_CFG_SWITCH, sw->cap_plug_events + 4, 1);
}
enum tb_eeprom_transfer {
TB_EEPROM_IN,
TB_EEPROM_OUT,
};
/**
* tb_eeprom_active - enable rom access
*
* WARNING: Always disable access after usage. Otherwise the controller will
* fail to reprobe.
*/
static int tb_eeprom_active(struct tb_switch *sw, bool enable)
{
struct tb_eeprom_ctl ctl;
int res = tb_eeprom_ctl_read(sw, &ctl);
if (res)
return res;
if (enable) {
ctl.access_high = 1;
res = tb_eeprom_ctl_write(sw, &ctl);
if (res)
return res;
ctl.access_low = 0;
return tb_eeprom_ctl_write(sw, &ctl);
} else {
ctl.access_low = 1;
res = tb_eeprom_ctl_write(sw, &ctl);
if (res)
return res;
ctl.access_high = 0;
return tb_eeprom_ctl_write(sw, &ctl);
}
}
/**
* tb_eeprom_transfer - transfer one bit
*
* If TB_EEPROM_IN is passed, then the bit can be retrieved from ctl->data_in.
* If TB_EEPROM_OUT is passed, then ctl->data_out will be written.
*/
static int tb_eeprom_transfer(struct tb_switch *sw, struct tb_eeprom_ctl *ctl,
enum tb_eeprom_transfer direction)
{
int res;
if (direction == TB_EEPROM_OUT) {
res = tb_eeprom_ctl_write(sw, ctl);
if (res)
return res;
}
ctl->clock = 1;
res = tb_eeprom_ctl_write(sw, ctl);
if (res)
return res;
if (direction == TB_EEPROM_IN) {
res = tb_eeprom_ctl_read(sw, ctl);
if (res)
return res;
}
ctl->clock = 0;
return tb_eeprom_ctl_write(sw, ctl);
}
/**
* tb_eeprom_out - write one byte to the bus
*/
static int tb_eeprom_out(struct tb_switch *sw, u8 val)
{
struct tb_eeprom_ctl ctl;
int i;
int res = tb_eeprom_ctl_read(sw, &ctl);
if (res)
return res;
for (i = 0; i < 8; i++) {
ctl.data_out = val & 0x80;
res = tb_eeprom_transfer(sw, &ctl, TB_EEPROM_OUT);
if (res)
return res;
val <<= 1;
}
return 0;
}
/**
* tb_eeprom_in - read one byte from the bus
*/
static int tb_eeprom_in(struct tb_switch *sw, u8 *val)
{
struct tb_eeprom_ctl ctl;
int i;
int res = tb_eeprom_ctl_read(sw, &ctl);
if (res)
return res;
*val = 0;
for (i = 0; i < 8; i++) {
*val <<= 1;
res = tb_eeprom_transfer(sw, &ctl, TB_EEPROM_IN);
if (res)
return res;
*val |= ctl.data_in;
}
return 0;
}
/**
* tb_eeprom_read_n - read count bytes from offset into val
*/
static int tb_eeprom_read_n(struct tb_switch *sw, u16 offset, u8 *val,
size_t count)
{
int i, res;
res = tb_eeprom_active(sw, true);
if (res)
return res;
res = tb_eeprom_out(sw, 3);
if (res)
return res;
res = tb_eeprom_out(sw, offset >> 8);
if (res)
return res;
res = tb_eeprom_out(sw, offset);
if (res)
return res;
for (i = 0; i < count; i++) {
res = tb_eeprom_in(sw, val + i);
if (res)
return res;
}
return tb_eeprom_active(sw, false);
}
static u8 tb_crc8(u8 *data, int len)
{
int i, j;
u8 val = 0xff;
for (i = 0; i < len; i++) {
val ^= data[i];
for (j = 0; j < 8; j++)
val = (val << 1) ^ ((val & 0x80) ? 7 : 0);
}
return val;
}
static u32 tb_crc32(void *data, size_t len)
{
return ~__crc32c_le(~0, data, len);
}
#define TB_DROM_DATA_START 13
struct tb_drom_header {
/* BYTE 0 */
u8 uid_crc8; /* checksum for uid */
/* BYTES 1-8 */
u64 uid;
/* BYTES 9-12 */
u32 data_crc32; /* checksum for data_len bytes starting at byte 13 */
/* BYTE 13 */
u8 device_rom_revision; /* should be <= 1 */
u16 data_len:10;
u8 __unknown1:6;
/* BYTES 16-21 */
u16 vendor_id;
u16 model_id;
u8 model_rev;
u8 eeprom_rev;
} __packed;
enum tb_drom_entry_type {
/* force unsigned to prevent "one-bit signed bitfield" warning */
TB_DROM_ENTRY_GENERIC = 0U,
TB_DROM_ENTRY_PORT,
};
struct tb_drom_entry_header {
u8 len;
u8 index:6;
bool port_disabled:1; /* only valid if type is TB_DROM_ENTRY_PORT */
enum tb_drom_entry_type type:1;
} __packed;
struct tb_drom_entry_generic {
struct tb_drom_entry_header header;
u8 data[0];
} __packed;
struct tb_drom_entry_port {
/* BYTES 0-1 */
struct tb_drom_entry_header header;
/* BYTE 2 */
u8 dual_link_port_rid:4;
u8 link_nr:1;
u8 unknown1:2;
bool has_dual_link_port:1;
/* BYTE 3 */
u8 dual_link_port_nr:6;
u8 unknown2:2;
/* BYTES 4 - 5 TODO decode */
u8 micro2:4;
u8 micro1:4;
u8 micro3;
/* BYTES 6-7, TODO: verify (find hardware that has these set) */
u8 peer_port_rid:4;
u8 unknown3:3;
bool has_peer_port:1;
u8 peer_port_nr:6;
u8 unknown4:2;
} __packed;
/**
* tb_eeprom_get_drom_offset - get drom offset within eeprom
*/
static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset)
{
struct tb_cap_plug_events cap;
int res;
if (!sw->cap_plug_events) {
tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n");
return -ENOSYS;
}
res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events,
sizeof(cap) / 4);
if (res)
return res;
if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) {
tb_sw_warn(sw, "no NVM\n");
return -ENOSYS;
}
if (cap.drom_offset > 0xffff) {
tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n",
cap.drom_offset);
return -ENXIO;
}
*offset = cap.drom_offset;
return 0;
}
/**
* tb_drom_read_uid_only - read uid directly from drom
*
* Does not use the cached copy in sw->drom. Used during resume to check switch
* identity.
*/
int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid)
{
u8 data[9];
u16 drom_offset;
u8 crc;
int res = tb_eeprom_get_drom_offset(sw, &drom_offset);
if (res)
return res;
if (drom_offset == 0)
return -ENODEV;
/* read uid */
res = tb_eeprom_read_n(sw, drom_offset, data, 9);
if (res)
return res;
crc = tb_crc8(data + 1, 8);
if (crc != data[0]) {
tb_sw_warn(sw, "uid crc8 mismatch (expected: %#x, got: %#x)\n",
data[0], crc);
return -EIO;
}
*uid = *(u64 *)(data+1);
return 0;
}
static int tb_drom_parse_entry_generic(struct tb_switch *sw,
struct tb_drom_entry_header *header)
{
const struct tb_drom_entry_generic *entry =
(const struct tb_drom_entry_generic *)header;
switch (header->index) {
case 1:
/* Length includes 2 bytes header so remove it before copy */
sw->vendor_name = kstrndup(entry->data,
header->len - sizeof(*header), GFP_KERNEL);
if (!sw->vendor_name)
return -ENOMEM;
break;
case 2:
sw->device_name = kstrndup(entry->data,
header->len - sizeof(*header), GFP_KERNEL);
if (!sw->device_name)
return -ENOMEM;
break;
}
return 0;
}
static int tb_drom_parse_entry_port(struct tb_switch *sw,
struct tb_drom_entry_header *header)
{
struct tb_port *port;
int res;
enum tb_port_type type;
thunderbolt: Do not enumerate more ports from DROM than the controller has Some Alpine Ridge LP DROMs (there might be others) erroneusly list more ports than the controller actually has. Most probably because DROM of the full Dual/Single port Thunderbolt controller was reused for LP version. The current DROM parser does not check the upper bound thus it leads to crash when sw->ports[] is accessed over bounds: BUG: unable to handle kernel NULL pointer dereference at 00000000000002ec IP: tb_drom_read+0x383/0x890 [thunderbolt] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 3 PID: 12248 Comm: systemd-udevd Not tainted 4.13.0-rc1-next-20170719 #1 Hardware name: LENOVO 20HF000YGE/20HF000YGE, BIOS N1WET32W (1.11 ) 05/23/2017 task: ffff8a293e4bcd80 task.stack: ffffa698027a8000 RIP: 0010:tb_drom_read+0x383/0x890 [thunderbolt] RSP: 0018:ffffa698027ab990 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a2940af7800 RCX: 0000000000000000 RDX: ffff8a2940ebb400 RSI: 0000000000000000 RDI: ffffa698027ab9a0 RBP: ffffa698027ab9d0 R08: 0000000000000001 R09: 0000000000000002 R10: ffff8a2940ebb5b0 R11: 0000000000000000 R12: ffff8a293bfa968c R13: 000000000000002c R14: 0000000000000056 R15: 0000000000000056 FS: 00007f0a945a38c0(0000) GS:ffff8a2961580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ec CR3: 000000043e785000 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tb_switch_add+0x9d/0x730 [thunderbolt] ? tb_switch_alloc+0x3cd/0x4d0 [thunderbolt] icm_start+0x5a/0xa0 [thunderbolt] tb_domain_add+0xc3/0xf0 [thunderbolt] nhi_probe+0x19e/0x310 [thunderbolt] local_pci_probe+0x42/0xa0 pci_device_probe+0x18d/0x1a0 driver_probe_device+0x2ff/0x450 __driver_attach+0xa4/0xe0 ? driver_probe_device+0x450/0x450 bus_for_each_dev+0x6e/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1d0/0x270 ? 0xffffffffc0bbb000 driver_register+0x60/0xe0 ? 0xffffffffc0bbb000 __pci_register_driver+0x4c/0x50 nhi_init+0x28/0x1000 [thunderbolt] do_one_initcall+0x50/0x190 ? __vunmap+0x81/0xb0 ? _cond_resched+0x1a/0x50 ? kmem_cache_alloc_trace+0x15f/0x1c0 ? do_init_module+0x27/0x1e9 do_init_module+0x5f/0x1e9 load_module+0x24e7/0x2a60 ? vfs_read+0x115/0x130 SYSC_finit_module+0xfc/0x120 ? SYSC_finit_module+0xfc/0x120 SyS_finit_module+0xe/0x10 do_syscall_64+0x67/0x170 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by making sure we only enumerate DROM port entries the hardware actually has. Reported-by: Christian Kellner <ckellner@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Tested-by: Christian Kellner <ckellner@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-25 22:41:58 +08:00
/*
* Some DROMs list more ports than the controller actually has
* so we skip those but allow the parser to continue.
*/
if (header->index > sw->config.max_port_number) {
dev_info_once(&sw->dev, "ignoring unnecessary extra entries in DROM\n");
return 0;
}
port = &sw->ports[header->index];
port->disabled = header->port_disabled;
if (port->disabled)
return 0;
res = tb_port_read(port, &type, TB_CFG_PORT, 2, 1);
if (res)
return res;
type &= 0xffffff;
if (type == TB_TYPE_PORT) {
struct tb_drom_entry_port *entry = (void *) header;
if (header->len != sizeof(*entry)) {
tb_sw_warn(sw,
"port entry has size %#x (expected %#zx)\n",
header->len, sizeof(struct tb_drom_entry_port));
return -EIO;
}
port->link_nr = entry->link_nr;
if (entry->has_dual_link_port)
port->dual_link_port =
&port->sw->ports[entry->dual_link_port_nr];
}
return 0;
}
/**
* tb_drom_parse_entries - parse the linked list of drom entries
*
* Drom must have been copied to sw->drom.
*/
static int tb_drom_parse_entries(struct tb_switch *sw)
{
struct tb_drom_header *header = (void *) sw->drom;
u16 pos = sizeof(*header);
u16 drom_size = header->data_len + TB_DROM_DATA_START;
int res;
while (pos < drom_size) {
struct tb_drom_entry_header *entry = (void *) (sw->drom + pos);
if (pos + 1 == drom_size || pos + entry->len > drom_size
|| !entry->len) {
tb_sw_warn(sw, "drom buffer overrun, aborting\n");
return -EIO;
}
switch (entry->type) {
case TB_DROM_ENTRY_GENERIC:
res = tb_drom_parse_entry_generic(sw, entry);
break;
case TB_DROM_ENTRY_PORT:
res = tb_drom_parse_entry_port(sw, entry);
break;
}
if (res)
return res;
pos += entry->len;
}
return 0;
}
thunderbolt: Use Device ROM retrieved from EFI Macs with Thunderbolt 1 do not have a unit-specific DROM: The DROM is empty with uid 0x1000000000000. (Apple started factory-burning a unit- specific DROM with Thunderbolt 2.) Instead, the NHI EFI driver supplies a DROM in a device property. Use it if available. It's only available when booting with the efistub. If it's not available, silently fall back to our hardcoded DROM. The size of the DROM is always 256 bytes. The number is hardcoded into the NHI EFI driver. This commit can deal with an arbitrary size however, just in case they ever change that. Background information: The EFI firmware volume contains ROM files for the NHI, GMUX and several other chips as well as key material. This strategy allows Apple to deploy ROM or key updates by simply publishing an EFI firmware update on their website. Drivers do not access those files directly but rather through a file server via EFI protocol AC5E4829-A8FD-440B-AF33-9FFE013B12D8. Files are identified by GUID, the NHI DROM has 339370BD-CFC6-4454-8EF7-704653120818. The NHI EFI driver amends that file with a unit-specific uid. The uid has 64 bit but its entropy is much lower: 24 bit represent the model, 24 bit are taken from a serial number, 16 bit are fixed. The NHI EFI driver obtains the serial number via the DataHub protocol, copies it into the DROM, calculates the CRC and submits the result as a device property. A modification is needed in the resume code where we currently read the uid of all switches in the hierarchy to detect plug events that occurred during sleep. On Thunderbolt 1 root switches this will now lead to a mismatch between the uid of the empty DROM and the EFI DROM. Exempt the root switch from this check: It's built in, so the uid should never change. However we continue to *read* the uid of the root switch, this seems like a good way to test its reachability after resume. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Andreas Noever <andreas.noever@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Vilaça <reverser@put.as> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-10-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-13 05:32:37 +08:00
/**
* tb_drom_copy_efi - copy drom supplied by EFI to sw->drom if present
*/
static int tb_drom_copy_efi(struct tb_switch *sw, u16 *size)
{
struct device *dev = &sw->tb->nhi->pdev->dev;
int len, res;
len = device_property_read_u8_array(dev, "ThunderboltDROM", NULL, 0);
if (len < 0 || len < sizeof(struct tb_drom_header))
return -EINVAL;
sw->drom = kmalloc(len, GFP_KERNEL);
if (!sw->drom)
return -ENOMEM;
res = device_property_read_u8_array(dev, "ThunderboltDROM", sw->drom,
len);
if (res)
goto err;
*size = ((struct tb_drom_header *)sw->drom)->data_len +
TB_DROM_DATA_START;
if (*size > len)
goto err;
return 0;
err:
kfree(sw->drom);
sw->drom = NULL;
return -EINVAL;
}
static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size)
{
u32 drom_offset;
int ret;
if (!sw->dma_port)
return -ENODEV;
ret = tb_sw_read(sw, &drom_offset, TB_CFG_SWITCH,
sw->cap_plug_events + 12, 1);
if (ret)
return ret;
if (!drom_offset)
return -ENODEV;
ret = dma_port_flash_read(sw->dma_port, drom_offset + 14, size,
sizeof(*size));
if (ret)
return ret;
/* Size includes CRC8 + UID + CRC32 */
*size += 1 + 8 + 4;
sw->drom = kzalloc(*size, GFP_KERNEL);
if (!sw->drom)
return -ENOMEM;
ret = dma_port_flash_read(sw->dma_port, drom_offset, sw->drom, *size);
if (ret)
goto err_free;
/*
* Read UID from the minimal DROM because the one in NVM is just
* a placeholder.
*/
tb_drom_read_uid_only(sw, &sw->uid);
return 0;
err_free:
kfree(sw->drom);
sw->drom = NULL;
return ret;
}
/**
* tb_drom_read - copy drom to sw->drom and parse it
*/
int tb_drom_read(struct tb_switch *sw)
{
u16 drom_offset;
u16 size;
u32 crc;
struct tb_drom_header *header;
int res;
if (sw->drom)
return 0;
if (tb_route(sw) == 0) {
thunderbolt: Use Device ROM retrieved from EFI Macs with Thunderbolt 1 do not have a unit-specific DROM: The DROM is empty with uid 0x1000000000000. (Apple started factory-burning a unit- specific DROM with Thunderbolt 2.) Instead, the NHI EFI driver supplies a DROM in a device property. Use it if available. It's only available when booting with the efistub. If it's not available, silently fall back to our hardcoded DROM. The size of the DROM is always 256 bytes. The number is hardcoded into the NHI EFI driver. This commit can deal with an arbitrary size however, just in case they ever change that. Background information: The EFI firmware volume contains ROM files for the NHI, GMUX and several other chips as well as key material. This strategy allows Apple to deploy ROM or key updates by simply publishing an EFI firmware update on their website. Drivers do not access those files directly but rather through a file server via EFI protocol AC5E4829-A8FD-440B-AF33-9FFE013B12D8. Files are identified by GUID, the NHI DROM has 339370BD-CFC6-4454-8EF7-704653120818. The NHI EFI driver amends that file with a unit-specific uid. The uid has 64 bit but its entropy is much lower: 24 bit represent the model, 24 bit are taken from a serial number, 16 bit are fixed. The NHI EFI driver obtains the serial number via the DataHub protocol, copies it into the DROM, calculates the CRC and submits the result as a device property. A modification is needed in the resume code where we currently read the uid of all switches in the hierarchy to detect plug events that occurred during sleep. On Thunderbolt 1 root switches this will now lead to a mismatch between the uid of the empty DROM and the EFI DROM. Exempt the root switch from this check: It's built in, so the uid should never change. However we continue to *read* the uid of the root switch, this seems like a good way to test its reachability after resume. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Andreas Noever <andreas.noever@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Vilaça <reverser@put.as> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-10-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-13 05:32:37 +08:00
/*
* Apple's NHI EFI driver supplies a DROM for the root switch
* in a device property. Use it if available.
*/
if (tb_drom_copy_efi(sw, &size) == 0)
goto parse;
/* Non-Apple hardware has the DROM as part of NVM */
if (tb_drom_copy_nvm(sw, &size) == 0)
goto parse;
/*
* The root switch contains only a dummy drom (header only,
* no entries). Hardcode the configuration here.
*/
tb_drom_read_uid_only(sw, &sw->uid);
sw->ports[1].link_nr = 0;
sw->ports[2].link_nr = 1;
sw->ports[1].dual_link_port = &sw->ports[2];
sw->ports[2].dual_link_port = &sw->ports[1];
sw->ports[3].link_nr = 0;
sw->ports[4].link_nr = 1;
sw->ports[3].dual_link_port = &sw->ports[4];
sw->ports[4].dual_link_port = &sw->ports[3];
thunderbolt: Support 1st gen Light Ridge controller Add support for the 1st gen Light Ridge controller, which is built into these systems: iMac12,1 2011 21.5" iMac12,2 2011 27" Macmini5,1 2011 i5 2.3 GHz Macmini5,2 2011 i5 2.5 GHz Macmini5,3 2011 i7 2.0 GHz MacBookPro8,1 2011 13" MacBookPro8,2 2011 15" MacBookPro8,3 2011 17" MacBookPro9,1 2012 15" MacBookPro9,2 2012 13" Light Ridge (CV82524) was the very first copper Thunderbolt controller, introduced 2010 alongside its fiber-optic cousin Light Peak (CVL2510). Consequently the chip suffers from some teething troubles: - MSI is broken for hotplug signaling on the downstream bridges: The chip just never sends an interrupt. It requests 32 MSIs for each of its six bridges and the pcieport driver only allocates one per bridge. However I've verified that even if 32 MSIs are allocated there's no interrupt on hotplug. The only option is thus to disable MSI, which is also what OS X does. Apparently all Thunderbolt chips up to revision 1 of Cactus Ridge 4C are plagued by this issue so quirk those as well. - The chip supports a maximum hop_count of 32, unlike its successors which support only 12. Fixup ring_interrupt_active() to cope with values >= 32. - Another peculiarity is that the chip supports a maximum of 13 ports whereas its successors support 12. However the additional port (#5) seems to be unusable as reading its TB_CFG_PORT config space results in TB_CFG_ERROR_INVALID_CONFIG_SPACE. Add a quirk to mark the port disabled on the root switch, assuming that's necessary on all Macs using this chip. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: William Brown <william@blackhats.net.au> [MacBookPro8,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
2016-03-20 20:57:20 +08:00
/* Port 5 is inaccessible on this gen 1 controller */
if (sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE)
sw->ports[5].disabled = true;
return 0;
}
res = tb_eeprom_get_drom_offset(sw, &drom_offset);
if (res)
return res;
res = tb_eeprom_read_n(sw, drom_offset + 14, (u8 *) &size, 2);
if (res)
return res;
size &= 0x3ff;
size += TB_DROM_DATA_START;
tb_sw_dbg(sw, "reading drom (length: %#x)\n", size);
if (size < sizeof(*header)) {
tb_sw_warn(sw, "drom too small, aborting\n");
return -EIO;
}
sw->drom = kzalloc(size, GFP_KERNEL);
if (!sw->drom)
return -ENOMEM;
res = tb_eeprom_read_n(sw, drom_offset, sw->drom, size);
if (res)
goto err;
thunderbolt: Use Device ROM retrieved from EFI Macs with Thunderbolt 1 do not have a unit-specific DROM: The DROM is empty with uid 0x1000000000000. (Apple started factory-burning a unit- specific DROM with Thunderbolt 2.) Instead, the NHI EFI driver supplies a DROM in a device property. Use it if available. It's only available when booting with the efistub. If it's not available, silently fall back to our hardcoded DROM. The size of the DROM is always 256 bytes. The number is hardcoded into the NHI EFI driver. This commit can deal with an arbitrary size however, just in case they ever change that. Background information: The EFI firmware volume contains ROM files for the NHI, GMUX and several other chips as well as key material. This strategy allows Apple to deploy ROM or key updates by simply publishing an EFI firmware update on their website. Drivers do not access those files directly but rather through a file server via EFI protocol AC5E4829-A8FD-440B-AF33-9FFE013B12D8. Files are identified by GUID, the NHI DROM has 339370BD-CFC6-4454-8EF7-704653120818. The NHI EFI driver amends that file with a unit-specific uid. The uid has 64 bit but its entropy is much lower: 24 bit represent the model, 24 bit are taken from a serial number, 16 bit are fixed. The NHI EFI driver obtains the serial number via the DataHub protocol, copies it into the DROM, calculates the CRC and submits the result as a device property. A modification is needed in the resume code where we currently read the uid of all switches in the hierarchy to detect plug events that occurred during sleep. On Thunderbolt 1 root switches this will now lead to a mismatch between the uid of the empty DROM and the EFI DROM. Exempt the root switch from this check: It's built in, so the uid should never change. However we continue to *read* the uid of the root switch, this seems like a good way to test its reachability after resume. Tested-by: Lukas Wunner <lukas@wunner.de> [MacBookPro9,1] Tested-by: Pierre Moreau <pierre.morrow@free.fr> [MacBookPro11,3] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Andreas Noever <andreas.noever@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pedro Vilaça <reverser@put.as> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112213237.8804-10-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-13 05:32:37 +08:00
parse:
header = (void *) sw->drom;
if (header->data_len + TB_DROM_DATA_START != size) {
tb_sw_warn(sw, "drom size mismatch, aborting\n");
goto err;
}
crc = tb_crc8((u8 *) &header->uid, 8);
if (crc != header->uid_crc8) {
tb_sw_warn(sw,
"drom uid crc8 mismatch (expected: %#x, got: %#x), aborting\n",
header->uid_crc8, crc);
goto err;
}
if (!sw->uid)
sw->uid = header->uid;
sw->vendor = header->vendor_id;
sw->device = header->model_id;
crc = tb_crc32(sw->drom + TB_DROM_DATA_START, header->data_len);
if (crc != header->data_crc32) {
tb_sw_warn(sw,
"drom data crc32 mismatch (expected: %#x, got: %#x), continuing\n",
header->data_crc32, crc);
}
if (header->device_rom_revision > 2)
tb_sw_warn(sw, "drom device_rom_revision %#x unknown\n",
header->device_rom_revision);
return tb_drom_parse_entries(sw);
err:
kfree(sw->drom);
sw->drom = NULL;
return -EIO;
}