OpenCloudOS-Kernel/drivers/hid/hid-picolcd_cir.c

139 lines
3.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/***************************************************************************
* Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> *
* *
* Based on Logitech G13 driver (v0.4) *
* Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> *
* *
***************************************************************************/
#include <linux/hid.h>
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"
#include <linux/fb.h>
#include <linux/vmalloc.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/leds.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/completion.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <media/rc-core.h>
#include "hid-picolcd.h"
int picolcd_raw_cir(struct picolcd_data *data,
struct hid_report *report, u8 *raw_data, int size)
{
unsigned long flags;
int i, w, sz;
struct ir_raw_event rawir = {};
/* ignore if rc_dev is NULL or status is shunned */
spin_lock_irqsave(&data->lock, flags);
if (!data->rc_dev || (data->status & PICOLCD_CIR_SHUN)) {
spin_unlock_irqrestore(&data->lock, flags);
return 1;
}
spin_unlock_irqrestore(&data->lock, flags);
/* PicoLCD USB packets contain 16-bit intervals in network order,
* with value negated for pulse. Intervals are in microseconds.
*
* Note: some userspace LIRC code for PicoLCD says negated values
* for space - is it a matter of IR chip? (pulse for my TSOP2236)
*
* In addition, the first interval seems to be around 15000 + base
* interval for non-first report of IR data - thus the quirk below
* to get RC_CODE to understand Sony and JVC remotes I have at hand
*/
sz = size > 0 ? min((int)raw_data[0], size-1) : 0;
for (i = 0; i+1 < sz; i += 2) {
w = (raw_data[i] << 8) | (raw_data[i+1]);
rawir.pulse = !!(w & 0x8000);
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
rawir.duration = rawir.pulse ? (65536 - w) : w;
/* Quirk!! - see above */
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
if (i == 0 && rawir.duration > 15000)
rawir.duration -= 15000;
ir_raw_event_store(data->rc_dev, &rawir);
}
ir_raw_event_handle(data->rc_dev);
return 1;
}
static int picolcd_cir_open(struct rc_dev *dev)
{
struct picolcd_data *data = dev->priv;
unsigned long flags;
spin_lock_irqsave(&data->lock, flags);
data->status &= ~PICOLCD_CIR_SHUN;
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
static void picolcd_cir_close(struct rc_dev *dev)
{
struct picolcd_data *data = dev->priv;
unsigned long flags;
spin_lock_irqsave(&data->lock, flags);
data->status |= PICOLCD_CIR_SHUN;
spin_unlock_irqrestore(&data->lock, flags);
}
/* initialize CIR input device */
int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
{
struct rc_dev *rdev;
int ret = 0;
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
return -ENOMEM;
rdev->priv = data;
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
rdev->open = picolcd_cir_open;
rdev->close = picolcd_cir_close;
rdev->device_name = data->hdev->name;
rdev->input_phys = data->hdev->phys;
rdev->input_id.bustype = data->hdev->bus;
rdev->input_id.vendor = data->hdev->vendor;
rdev->input_id.product = data->hdev->product;
rdev->input_id.version = data->hdev->version;
rdev->dev.parent = &data->hdev->dev;
rdev->driver_name = PICOLCD_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
media: rc: harmonize infrared durations to microseconds rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24 01:23:05 +08:00
rdev->timeout = MS_TO_US(100);
rdev->rx_resolution = 1;
ret = rc_register_device(rdev);
if (ret)
goto err;
data->rc_dev = rdev;
return 0;
err:
rc_free_device(rdev);
return ret;
}
void picolcd_exit_cir(struct picolcd_data *data)
{
struct rc_dev *rdev = data->rc_dev;
data->rc_dev = NULL;
rc_unregister_device(rdev);
}