UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/sched/cls_bpf.c

660 lines
14 KiB
C
Raw Normal View History

net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
/*
* Berkeley Packet Filter based traffic classifier
*
* Might be used to classify traffic through flexible, user-defined and
* possibly JIT-ed BPF filters for traffic control as an alternative to
* ematches.
*
* (C) 2013 Daniel Borkmann <dborkman@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/filter.h>
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
#include <linux/bpf.h>
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
#include <net/rtnetlink.h>
#include <net/pkt_cls.h>
#include <net/sock.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Daniel Borkmann <dborkman@redhat.com>");
MODULE_DESCRIPTION("TC BPF based classifier");
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
#define CLS_BPF_NAME_LEN 256
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
#define CLS_BPF_SUPPORTED_GEN_FLAGS \
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
(TCA_CLS_FLAGS_SKIP_HW | TCA_CLS_FLAGS_SKIP_SW)
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct cls_bpf_head {
struct list_head plist;
u32 hgen;
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct rcu_head rcu;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
};
struct cls_bpf_prog {
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 11:34:16 +08:00
struct bpf_prog *filter;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct list_head link;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
struct tcf_result res;
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
bool exts_integrated;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
bool offloaded;
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
u32 gen_flags;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
struct tcf_exts exts;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
u32 handle;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
union {
u32 bpf_fd;
u16 bpf_num_ops;
};
struct sock_filter *bpf_ops;
const char *bpf_name;
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct tcf_proto *tp;
struct rcu_head rcu;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
};
static const struct nla_policy bpf_policy[TCA_BPF_MAX + 1] = {
[TCA_BPF_CLASSID] = { .type = NLA_U32 },
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
[TCA_BPF_FLAGS] = { .type = NLA_U32 },
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
[TCA_BPF_FLAGS_GEN] = { .type = NLA_U32 },
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
[TCA_BPF_FD] = { .type = NLA_U32 },
net sched: stylistic cleanups Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18 20:45:33 +08:00
[TCA_BPF_NAME] = { .type = NLA_NUL_STRING,
.len = CLS_BPF_NAME_LEN },
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
[TCA_BPF_OPS_LEN] = { .type = NLA_U16 },
[TCA_BPF_OPS] = { .type = NLA_BINARY,
.len = sizeof(struct sock_filter) * BPF_MAXINSNS },
};
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
static int cls_bpf_exec_opcode(int code)
{
switch (code) {
case TC_ACT_OK:
case TC_ACT_SHOT:
case TC_ACT_STOLEN:
bpf: add bpf_redirect() helper Existing bpf_clone_redirect() helper clones skb before redirecting it to RX or TX of destination netdev. Introduce bpf_redirect() helper that does that without cloning. Benchmarked with two hosts using 10G ixgbe NICs. One host is doing line rate pktgen. Another host is configured as: $ tc qdisc add dev $dev ingress $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop so it receives the packet on $dev and immediately xmits it on $dev + 1 The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program that does bpf_clone_redirect() and performance is 2.0 Mpps $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section redirect_xmit drop which is using bpf_redirect() - 2.4 Mpps and using cls_bpf with integrated actions as: $ tc filter add dev $dev root pref 10 \ bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1 performance is 2.5 Mpps To summarize: u32+act_bpf using clone_redirect - 2.0 Mpps u32+act_bpf using redirect - 2.4 Mpps cls_bpf using redirect - 2.5 Mpps For comparison linux bridge in this setup is doing 2.1 Mpps and ixgbe rx + drop in ip_rcv - 7.8 Mpps Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:43 +08:00
case TC_ACT_REDIRECT:
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
case TC_ACT_UNSPEC:
return code;
default:
return TC_ACT_UNSPEC;
}
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
static int cls_bpf_classify(struct sk_buff *skb, const struct tcf_proto *tp,
struct tcf_result *res)
{
net_sched: fix suspicious RCU usage in cls_bpf_classify() Fixes: commit 1f947bf151e90ec0baad2948 ("net: sched: rcu'ify cls_bpf") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16 05:21:50 +08:00
struct cls_bpf_head *head = rcu_dereference_bh(tp->root);
net, sched: add skb_at_tc_ingress helper Add a skb_at_tc_ingress() as this will be needed elsewhere as well and can hide the ugly ifdef. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 22:50:22 +08:00
bool at_ingress = skb_at_tc_ingress(skb);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct cls_bpf_prog *prog;
cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps Currently, it is possible in cls_bpf to access eBPF maps only under rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(), the classifier would be called from __netif_receive_skb_core() under rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via __dev_queue_xmit(). This rcu/rcu_bh mix doesn't work together with eBPF maps as they require soley to be called under rcu_read_lock(). eBPF maps could also be shared among various other eBPF programs (possibly even with other eBPF program types, f.e. tracing) and user space processes, so any context is assumed. Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program invocation under non-bh RCU lock variant. Fixes: e2e9b6541dd4 ("cls_bpf: add initial eBPF support for programmable classifiers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 03:03:12 +08:00
int ret = -1;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps Currently, it is possible in cls_bpf to access eBPF maps only under rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(), the classifier would be called from __netif_receive_skb_core() under rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via __dev_queue_xmit(). This rcu/rcu_bh mix doesn't work together with eBPF maps as they require soley to be called under rcu_read_lock(). eBPF maps could also be shared among various other eBPF programs (possibly even with other eBPF program types, f.e. tracing) and user space processes, so any context is assumed. Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program invocation under non-bh RCU lock variant. Fixes: e2e9b6541dd4 ("cls_bpf: add initial eBPF support for programmable classifiers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 03:03:12 +08:00
/* Needed here for accessing maps. */
rcu_read_lock();
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
list_for_each_entry_rcu(prog, &head->plist, link) {
bpf: make programs see skb->data == L2 for ingress and egress eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data. For ingress L2 header is already pulled, whereas for egress it's present. This is known to program writers which are currently forced to use BPF_LL_OFF workaround. Since programs don't change skb internal pointers it is safe to do pull/push right around invocation of the program and earlier taps and later pt->func() will not be affected. Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick around run_filter/BPF_PROG_RUN even if skb_shared. This fix finally allows programs to use optimized LD_ABS/IND instructions without BPF_LL_OFF for higher performance. tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o w/o JIT w/JIT before 20.5 23.6 Mpps after 21.8 26.6 Mpps Old programs with BPF_LL_OFF will still work as-is. We can now undo most of the earlier workaround commit: a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 01:11:53 +08:00
int filter_res;
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
qdisc_skb_cb(skb)->tc_classid = prog->res.classid;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
if (tc_skip_sw(prog->gen_flags)) {
filter_res = prog->exts_integrated ? TC_ACT_UNSPEC : 0;
} else if (at_ingress) {
bpf: make programs see skb->data == L2 for ingress and egress eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data. For ingress L2 header is already pulled, whereas for egress it's present. This is known to program writers which are currently forced to use BPF_LL_OFF workaround. Since programs don't change skb internal pointers it is safe to do pull/push right around invocation of the program and earlier taps and later pt->func() will not be affected. Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick around run_filter/BPF_PROG_RUN even if skb_shared. This fix finally allows programs to use optimized LD_ABS/IND instructions without BPF_LL_OFF for higher performance. tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o w/o JIT w/JIT before 20.5 23.6 Mpps after 21.8 26.6 Mpps Old programs with BPF_LL_OFF will still work as-is. We can now undo most of the earlier workaround commit: a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 01:11:53 +08:00
/* It is safe to push/pull even if skb_shared() */
__skb_push(skb, skb->mac_len);
bpf: wire in data and data_end for cls_act_bpf allow cls_bpf and act_bpf programs access skb->data and skb->data_end pointers. The bpf helpers that change skb->data need to update data_end pointer as well. The verifier checks that programs always reload data, data_end pointers after calls to such bpf helpers. We cannot add 'data_end' pointer to struct qdisc_skb_cb directly, since it's embedded as-is by infiniband ipoib, so wrapper struct is needed. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 10:49:12 +08:00
bpf_compute_data_end(skb);
bpf: make programs see skb->data == L2 for ingress and egress eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data. For ingress L2 header is already pulled, whereas for egress it's present. This is known to program writers which are currently forced to use BPF_LL_OFF workaround. Since programs don't change skb internal pointers it is safe to do pull/push right around invocation of the program and earlier taps and later pt->func() will not be affected. Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick around run_filter/BPF_PROG_RUN even if skb_shared. This fix finally allows programs to use optimized LD_ABS/IND instructions without BPF_LL_OFF for higher performance. tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o w/o JIT w/JIT before 20.5 23.6 Mpps after 21.8 26.6 Mpps Old programs with BPF_LL_OFF will still work as-is. We can now undo most of the earlier workaround commit: a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 01:11:53 +08:00
filter_res = BPF_PROG_RUN(prog->filter, skb);
__skb_pull(skb, skb->mac_len);
} else {
bpf: wire in data and data_end for cls_act_bpf allow cls_bpf and act_bpf programs access skb->data and skb->data_end pointers. The bpf helpers that change skb->data need to update data_end pointer as well. The verifier checks that programs always reload data, data_end pointers after calls to such bpf helpers. We cannot add 'data_end' pointer to struct qdisc_skb_cb directly, since it's embedded as-is by infiniband ipoib, so wrapper struct is needed. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 10:49:12 +08:00
bpf_compute_data_end(skb);
bpf: make programs see skb->data == L2 for ingress and egress eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data. For ingress L2 header is already pulled, whereas for egress it's present. This is known to program writers which are currently forced to use BPF_LL_OFF workaround. Since programs don't change skb internal pointers it is safe to do pull/push right around invocation of the program and earlier taps and later pt->func() will not be affected. Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick around run_filter/BPF_PROG_RUN even if skb_shared. This fix finally allows programs to use optimized LD_ABS/IND instructions without BPF_LL_OFF for higher performance. tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o w/o JIT w/JIT before 20.5 23.6 Mpps after 21.8 26.6 Mpps Old programs with BPF_LL_OFF will still work as-is. We can now undo most of the earlier workaround commit: a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 01:11:53 +08:00
filter_res = BPF_PROG_RUN(prog->filter, skb);
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
if (prog->exts_integrated) {
cls_bpf: reset class and reuse major in da There are two issues with the current code. First one is that we need to set res->class to 0 in case we use non-default classid matching. This is important for the case where cls_bpf was initially set up with an optional binding to a default class with tcf_bind_filter(), where the underlying qdisc implements bind_tcf() that fills res->class and tests for it later on when doing the classification. Convention for these cases is that after tc_classify() was called, such qdiscs (atm, drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup based on classid. Second, there's a bug with da mode, where res->classid is only assigned a 16 bit minor, but it needs to expand to the full 32 bit major/minor combination instead, therefore we need to expand with the bound major. This is fine as classes belonging to a classful qdisc must share the same major. Fixes: 045efa82ff56 ("cls_bpf: introduce integrated actions") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16 05:41:22 +08:00
res->class = 0;
res->classid = TC_H_MAJ(prog->res.classid) |
qdisc_skb_cb(skb)->tc_classid;
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
ret = cls_bpf_exec_opcode(filter_res);
if (ret == TC_ACT_UNSPEC)
continue;
break;
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (filter_res == 0)
continue;
cls_bpf: reset class and reuse major in da There are two issues with the current code. First one is that we need to set res->class to 0 in case we use non-default classid matching. This is important for the case where cls_bpf was initially set up with an optional binding to a default class with tcf_bind_filter(), where the underlying qdisc implements bind_tcf() that fills res->class and tests for it later on when doing the classification. Convention for these cases is that after tc_classify() was called, such qdiscs (atm, drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup based on classid. Second, there's a bug with da mode, where res->classid is only assigned a 16 bit minor, but it needs to expand to the full 32 bit major/minor combination instead, therefore we need to expand with the bound major. This is fine as classes belonging to a classful qdisc must share the same major. Fixes: 045efa82ff56 ("cls_bpf: introduce integrated actions") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16 05:41:22 +08:00
if (filter_res != -1) {
res->class = 0;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
res->classid = filter_res;
cls_bpf: reset class and reuse major in da There are two issues with the current code. First one is that we need to set res->class to 0 in case we use non-default classid matching. This is important for the case where cls_bpf was initially set up with an optional binding to a default class with tcf_bind_filter(), where the underlying qdisc implements bind_tcf() that fills res->class and tests for it later on when doing the classification. Convention for these cases is that after tc_classify() was called, such qdiscs (atm, drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup based on classid. Second, there's a bug with da mode, where res->classid is only assigned a 16 bit minor, but it needs to expand to the full 32 bit major/minor combination instead, therefore we need to expand with the bound major. This is fine as classes belonging to a classful qdisc must share the same major. Fixes: 045efa82ff56 ("cls_bpf: introduce integrated actions") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16 05:41:22 +08:00
} else {
*res = prog->res;
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
ret = tcf_exts_exec(skb, &prog->exts, res);
if (ret < 0)
continue;
cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps Currently, it is possible in cls_bpf to access eBPF maps only under rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(), the classifier would be called from __netif_receive_skb_core() under rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via __dev_queue_xmit(). This rcu/rcu_bh mix doesn't work together with eBPF maps as they require soley to be called under rcu_read_lock(). eBPF maps could also be shared among various other eBPF programs (possibly even with other eBPF program types, f.e. tracing) and user space processes, so any context is assumed. Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program invocation under non-bh RCU lock variant. Fixes: e2e9b6541dd4 ("cls_bpf: add initial eBPF support for programmable classifiers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 03:03:12 +08:00
break;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps Currently, it is possible in cls_bpf to access eBPF maps only under rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(), the classifier would be called from __netif_receive_skb_core() under rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via __dev_queue_xmit(). This rcu/rcu_bh mix doesn't work together with eBPF maps as they require soley to be called under rcu_read_lock(). eBPF maps could also be shared among various other eBPF programs (possibly even with other eBPF program types, f.e. tracing) and user space processes, so any context is assumed. Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program invocation under non-bh RCU lock variant. Fixes: e2e9b6541dd4 ("cls_bpf: add initial eBPF support for programmable classifiers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 03:03:12 +08:00
rcu_read_unlock();
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: do eBPF invocation under non-bh RCU lock variant for maps Currently, it is possible in cls_bpf to access eBPF maps only under rcu_read_lock_bh() variants: while on ingress side, that is, handle_ing(), the classifier would be called from __netif_receive_skb_core() under rcu_read_lock(); on egress side, however, it's rcu_read_lock_bh() via __dev_queue_xmit(). This rcu/rcu_bh mix doesn't work together with eBPF maps as they require soley to be called under rcu_read_lock(). eBPF maps could also be shared among various other eBPF programs (possibly even with other eBPF program types, f.e. tracing) and user space processes, so any context is assumed. Therefore, a possible fix for cls_bpf is to wrap/nest eBPF program invocation under non-bh RCU lock variant. Fixes: e2e9b6541dd4 ("cls_bpf: add initial eBPF support for programmable classifiers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 03:03:12 +08:00
return ret;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
static bool cls_bpf_is_ebpf(const struct cls_bpf_prog *prog)
{
return !prog->bpf_ops;
}
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
static int cls_bpf_offload_cmd(struct tcf_proto *tp, struct cls_bpf_prog *prog,
enum tc_clsbpf_command cmd)
{
struct net_device *dev = tp->q->dev_queue->dev;
struct tc_cls_bpf_offload bpf_offload = {};
struct tc_to_netdev offload;
offload.type = TC_SETUP_CLSBPF;
offload.cls_bpf = &bpf_offload;
bpf_offload.command = cmd;
bpf_offload.exts = &prog->exts;
bpf_offload.prog = prog->filter;
bpf_offload.name = prog->bpf_name;
bpf_offload.exts_integrated = prog->exts_integrated;
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
bpf_offload.gen_flags = prog->gen_flags;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
return dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
tp->protocol, &offload);
}
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
static int cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog,
struct cls_bpf_prog *oldprog)
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
{
struct net_device *dev = tp->q->dev_queue->dev;
struct cls_bpf_prog *obj = prog;
enum tc_clsbpf_command cmd;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
bool skip_sw;
int ret;
skip_sw = tc_skip_sw(prog->gen_flags) ||
(oldprog && tc_skip_sw(oldprog->gen_flags));
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
if (oldprog && oldprog->offloaded) {
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
if (tc_should_offload(dev, tp, prog->gen_flags)) {
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
cmd = TC_CLSBPF_REPLACE;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
} else if (!tc_skip_sw(prog->gen_flags)) {
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
obj = oldprog;
cmd = TC_CLSBPF_DESTROY;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
} else {
return -EINVAL;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
}
} else {
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
if (!tc_should_offload(dev, tp, prog->gen_flags))
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
return skip_sw ? -EINVAL : 0;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
cmd = TC_CLSBPF_ADD;
}
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
ret = cls_bpf_offload_cmd(tp, obj, cmd);
if (ret)
return skip_sw ? ret : 0;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
obj->offloaded = true;
if (oldprog)
oldprog->offloaded = false;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
return 0;
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
}
static void cls_bpf_stop_offload(struct tcf_proto *tp,
struct cls_bpf_prog *prog)
{
int err;
if (!prog->offloaded)
return;
err = cls_bpf_offload_cmd(tp, prog, TC_CLSBPF_DESTROY);
if (err) {
pr_err("Stopping hardware offload failed: %d\n", err);
return;
}
prog->offloaded = false;
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
static int cls_bpf_init(struct tcf_proto *tp)
{
struct cls_bpf_head *head;
head = kzalloc(sizeof(*head), GFP_KERNEL);
if (head == NULL)
return -ENOBUFS;
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
INIT_LIST_HEAD_RCU(&head->plist);
rcu_assign_pointer(tp->root, head);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
return 0;
}
static void cls_bpf_delete_prog(struct tcf_proto *tp, struct cls_bpf_prog *prog)
{
net_sched: remove the first parameter from tcf_exts_destroy() Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <hadi@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 01:26:37 +08:00
tcf_exts_destroy(&prog->exts);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (cls_bpf_is_ebpf(prog))
bpf_prog_put(prog->filter);
else
bpf_prog_destroy(prog->filter);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
kfree(prog->bpf_name);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
kfree(prog->bpf_ops);
kfree(prog);
}
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
static void __cls_bpf_delete_prog(struct rcu_head *rcu)
{
struct cls_bpf_prog *prog = container_of(rcu, struct cls_bpf_prog, rcu);
cls_bpf_delete_prog(prog->tp, prog);
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
static int cls_bpf_delete(struct tcf_proto *tp, unsigned long arg)
{
net_sched: cls_bpf: remove unnecessary iteration and use passed arg Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 01:00:32 +08:00
struct cls_bpf_prog *prog = (struct cls_bpf_prog *) arg;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
cls_bpf_stop_offload(tp, prog);
net_sched: cls_bpf: remove unnecessary iteration and use passed arg Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 01:00:32 +08:00
list_del_rcu(&prog->link);
tcf_unbind_filter(tp, &prog->res);
call_rcu(&prog->rcu, __cls_bpf_delete_prog);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
net_sched: cls_bpf: remove unnecessary iteration and use passed arg Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 01:00:32 +08:00
return 0;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
net_sched: destroy proto tp when all filters are gone Kernel automatically creates a tp for each (kind, protocol, priority) tuple, which has handle 0, when we add a new filter, but it still is left there after we remove our own, unless we don't specify the handle (literally means all the filters under the tuple). For example this one is left: # tc filter show dev eth0 filter parent 8001: protocol arp pref 49152 basic The user-space is hard to clean up these for kernel because filters like u32 are organized in a complex way. So kernel is responsible to remove it after all filters are gone. Each type of filter has its own way to store the filters, so each type has to provide its way to check if all filters are gone. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 03:47:59 +08:00
static bool cls_bpf_destroy(struct tcf_proto *tp, bool force)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
{
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct cls_bpf_head *head = rtnl_dereference(tp->root);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct cls_bpf_prog *prog, *tmp;
net_sched: destroy proto tp when all filters are gone Kernel automatically creates a tp for each (kind, protocol, priority) tuple, which has handle 0, when we add a new filter, but it still is left there after we remove our own, unless we don't specify the handle (literally means all the filters under the tuple). For example this one is left: # tc filter show dev eth0 filter parent 8001: protocol arp pref 49152 basic The user-space is hard to clean up these for kernel because filters like u32 are organized in a complex way. So kernel is responsible to remove it after all filters are gone. Each type of filter has its own way to store the filters, so each type has to provide its way to check if all filters are gone. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 03:47:59 +08:00
if (!force && !list_empty(&head->plist))
return false;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
list_for_each_entry_safe(prog, tmp, &head->plist, link) {
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
cls_bpf_stop_offload(tp, prog);
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
list_del_rcu(&prog->link);
net: sched: do not use tcf_proto 'tp' argument from call_rcu Using the tcf_proto pointer 'tp' from inside the classifiers callback is not valid because it may have been cleaned up by another call_rcu occuring on another CPU. 'tp' is currently being used by tcf_unbind_filter() in this patch we move instances of tcf_unbind_filter outside of the call_rcu() context. This is safe to do because any running schedulers will either read the valid class field or it will be zeroed. And all schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. Reported-by: Cong Wang <xiyou.wangconf@gmail.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 12:28:52 +08:00
tcf_unbind_filter(tp, &prog->res);
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
call_rcu(&prog->rcu, __cls_bpf_delete_prog);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
RCU_INIT_POINTER(tp->root, NULL);
kfree_rcu(head, rcu);
net_sched: destroy proto tp when all filters are gone Kernel automatically creates a tp for each (kind, protocol, priority) tuple, which has handle 0, when we add a new filter, but it still is left there after we remove our own, unless we don't specify the handle (literally means all the filters under the tuple). For example this one is left: # tc filter show dev eth0 filter parent 8001: protocol arp pref 49152 basic The user-space is hard to clean up these for kernel because filters like u32 are organized in a complex way. So kernel is responsible to remove it after all filters are gone. Each type of filter has its own way to store the filters, so each type has to provide its way to check if all filters are gone. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 03:47:59 +08:00
return true;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
static unsigned long cls_bpf_get(struct tcf_proto *tp, u32 handle)
{
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct cls_bpf_head *head = rtnl_dereference(tp->root);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct cls_bpf_prog *prog;
unsigned long ret = 0UL;
if (head == NULL)
return 0UL;
net_sched: cls_bpf: remove faulty use of list_for_each_entry_rcu rcu variant is not correct here. The code is called by updater (rtnl lock is held), not by reader (no rcu_read_lock is held). Signed-off-by: Jiri Pirko <jiri@resnulli.us> ACKed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 01:00:33 +08:00
list_for_each_entry(prog, &head->plist, link) {
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (prog->handle == handle) {
ret = (unsigned long) prog;
break;
}
}
return ret;
}
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
static int cls_bpf_prog_from_ops(struct nlattr **tb, struct cls_bpf_prog *prog)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
{
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct sock_filter *bpf_ops;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
struct sock_fprog_kern fprog_tmp;
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct bpf_prog *fp;
tc: cls_bpf: rename bpf_len to bpf_num_ops It was suggested by DaveM to change the name as "len" might indicate unit bytes. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 16:52:40 +08:00
u16 bpf_size, bpf_num_ops;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
int ret;
tc: cls_bpf: rename bpf_len to bpf_num_ops It was suggested by DaveM to change the name as "len" might indicate unit bytes. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 16:52:40 +08:00
bpf_num_ops = nla_get_u16(tb[TCA_BPF_OPS_LEN]);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (bpf_num_ops > BPF_MAXINSNS || bpf_num_ops == 0)
return -EINVAL;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
tc: cls_bpf: rename bpf_len to bpf_num_ops It was suggested by DaveM to change the name as "len" might indicate unit bytes. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 16:52:40 +08:00
bpf_size = bpf_num_ops * sizeof(*bpf_ops);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (bpf_size != nla_len(tb[TCA_BPF_OPS]))
return -EINVAL;
net: cls_bpf: fix size mismatch on filter preparation In cls_bpf_modify_existing(), we read out the number of filter blocks, do some sanity checks, allocate a block on that size, and copy over the BPF instruction blob from user space, then pass everything through the classic BPF checker prior to installation of the classifier. We should reject mismatches here, there are 2 scenarios: the number of filter blocks could be smaller than the provided instruction blob, so we do a partial copy of the BPF program, and thus the instructions will either be rejected from the verifier or a valid BPF program will be run; in the other case, we'll end up copying more than we're supposed to, and most likely the trailing garbage will be rejected by the verifier as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be last instruction, load/stores must be correct, etc); in case not, we would leak memory when dumping back instruction patterns. The code should have only used nla_len() as Dave noted to avoid this from the beginning. Anyway, lets fix it by rejecting such load attempts. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22 17:41:01 +08:00
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
bpf_ops = kzalloc(bpf_size, GFP_KERNEL);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (bpf_ops == NULL)
return -ENOMEM;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
memcpy(bpf_ops, nla_data(tb[TCA_BPF_OPS]), bpf_size);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
fprog_tmp.len = bpf_num_ops;
fprog_tmp.filter = bpf_ops;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
ret = bpf_prog_create(&fp, &fprog_tmp);
if (ret < 0) {
kfree(bpf_ops);
return ret;
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
prog->bpf_ops = bpf_ops;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
prog->bpf_num_ops = bpf_num_ops;
prog->bpf_name = NULL;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
prog->filter = fp;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
return 0;
}
sched, bpf: add helper for retrieving routing realms Using routing realms as part of the classifier is quite useful, it can be viewed as a tag for one or multiple routing entries (think of an analogy to net_cls cgroup for processes), set by user space routing daemons or via iproute2 as an indicator for traffic classifiers and later on processed in the eBPF program. Unlike actions, the classifier can inspect device flags and enable netif_keep_dst() if necessary. tc actions don't have that possibility, but in case people know what they are doing, it can be used from there as well (e.g. via devs that must keep dsts by design anyway). If a realm is set, the handler returns the non-zero realm. User space can set the full 32bit realm for the dst. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 07:41:51 +08:00
static int cls_bpf_prog_from_efd(struct nlattr **tb, struct cls_bpf_prog *prog,
const struct tcf_proto *tp)
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
{
struct bpf_prog *fp;
char *name = NULL;
u32 bpf_fd;
bpf_fd = nla_get_u32(tb[TCA_BPF_FD]);
bpf: refactor bpf_prog_get and type check into helper Since bpf_prog_get() and program type check is used in a couple of places, refactor this into a small helper function that we can make use of. Since the non RO prog->aux part is not used in performance critical paths and a program destruction via RCU is rather very unlikley when doing the put, we shouldn't have an issue just doing the bpf_prog_get() + prog->type != type check, but actually not taking the ref at all (due to being in fdget() / fdput() section of the bpf fd) is even cleaner and makes the diff smaller as well, so just go for that. Callsites are changed to make use of the new helper where possible. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 23:24:44 +08:00
fp = bpf_prog_get_type(bpf_fd, BPF_PROG_TYPE_SCHED_CLS);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (IS_ERR(fp))
return PTR_ERR(fp);
if (tb[TCA_BPF_NAME]) {
name = kmemdup(nla_data(tb[TCA_BPF_NAME]),
nla_len(tb[TCA_BPF_NAME]),
GFP_KERNEL);
if (!name) {
bpf_prog_put(fp);
return -ENOMEM;
}
}
prog->bpf_ops = NULL;
prog->bpf_fd = bpf_fd;
prog->bpf_name = name;
prog->filter = fp;
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08 05:29:47 +08:00
if (fp->dst_needed && !(tp->q->flags & TCQ_F_INGRESS))
sched, bpf: add helper for retrieving routing realms Using routing realms as part of the classifier is quite useful, it can be viewed as a tag for one or multiple routing entries (think of an analogy to net_cls cgroup for processes), set by user space routing daemons or via iproute2 as an indicator for traffic classifiers and later on processed in the eBPF program. Unlike actions, the classifier can inspect device flags and enable netif_keep_dst() if necessary. tc actions don't have that possibility, but in case people know what they are doing, it can be used from there as well (e.g. via devs that must keep dsts by design anyway). If a realm is set, the handler returns the non-zero realm. User space can set the full 32bit realm for the dst. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 07:41:51 +08:00
netif_keep_dst(qdisc_dev(tp->q));
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
return 0;
}
static int cls_bpf_modify_existing(struct net *net, struct tcf_proto *tp,
struct cls_bpf_prog *prog,
unsigned long base, struct nlattr **tb,
struct nlattr *est, bool ovr)
{
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
bool is_bpf, is_ebpf, have_exts = false;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
struct tcf_exts exts;
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
u32 gen_flags = 0;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
int ret;
is_bpf = tb[TCA_BPF_OPS_LEN] && tb[TCA_BPF_OPS];
is_ebpf = tb[TCA_BPF_FD];
cls_bpf: make binding to classid optional The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:47 +08:00
if ((!is_bpf && !is_ebpf) || (is_bpf && is_ebpf))
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
return -EINVAL;
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
ret = tcf_exts_init(&exts, TCA_BPF_ACT, TCA_BPF_POLICE);
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (ret < 0)
return ret;
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
ret = tcf_exts_validate(net, tp, tb, est, &exts, ovr);
if (ret < 0)
goto errout;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
if (tb[TCA_BPF_FLAGS]) {
u32 bpf_flags = nla_get_u32(tb[TCA_BPF_FLAGS]);
if (bpf_flags & ~TCA_BPF_FLAG_ACT_DIRECT) {
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
ret = -EINVAL;
goto errout;
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
}
have_exts = bpf_flags & TCA_BPF_FLAG_ACT_DIRECT;
}
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
if (tb[TCA_BPF_FLAGS_GEN]) {
gen_flags = nla_get_u32(tb[TCA_BPF_FLAGS_GEN]);
if (gen_flags & ~CLS_BPF_SUPPORTED_GEN_FLAGS ||
!tc_flags_valid(gen_flags)) {
ret = -EINVAL;
goto errout;
}
}
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
prog->exts_integrated = have_exts;
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
prog->gen_flags = gen_flags;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
cls_bpf: introduce integrated actions Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 14:05:42 +08:00
ret = is_bpf ? cls_bpf_prog_from_ops(tb, prog) :
sched, bpf: add helper for retrieving routing realms Using routing realms as part of the classifier is quite useful, it can be viewed as a tag for one or multiple routing entries (think of an analogy to net_cls cgroup for processes), set by user space routing daemons or via iproute2 as an indicator for traffic classifiers and later on processed in the eBPF program. Unlike actions, the classifier can inspect device flags and enable netif_keep_dst() if necessary. tc actions don't have that possibility, but in case people know what they are doing, it can be used from there as well (e.g. via devs that must keep dsts by design anyway). If a realm is set, the handler returns the non-zero realm. User space can set the full 32bit realm for the dst. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 07:41:51 +08:00
cls_bpf_prog_from_efd(tb, prog, tp);
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
if (ret < 0)
goto errout;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
cls_bpf: make binding to classid optional The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:47 +08:00
if (tb[TCA_BPF_CLASSID]) {
prog->res.classid = nla_get_u32(tb[TCA_BPF_CLASSID]);
tcf_bind_filter(tp, &prog->res, base);
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
cls_bpf: make binding to classid optional The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:47 +08:00
tcf_exts_change(tp, &prog->exts, &exts);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
return 0;
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
errout:
tcf_exts_destroy(&exts);
return ret;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
static u32 cls_bpf_grab_new_handle(struct tcf_proto *tp,
struct cls_bpf_head *head)
{
unsigned int i = 0x80000000;
net: cls_bpf: fix auto generation of per list handles When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22 17:41:02 +08:00
u32 handle;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
do {
if (++head->hgen == 0x7FFFFFFF)
head->hgen = 1;
} while (--i > 0 && cls_bpf_get(tp, head->hgen));
net: cls_bpf: fix auto generation of per list handles When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22 17:41:02 +08:00
if (unlikely(i == 0)) {
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
pr_err("Insufficient number of handles\n");
net: cls_bpf: fix auto generation of per list handles When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22 17:41:02 +08:00
handle = 0;
} else {
handle = head->hgen;
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
net: cls_bpf: fix auto generation of per list handles When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22 17:41:02 +08:00
return handle;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
}
static int cls_bpf_change(struct net *net, struct sk_buff *in_skb,
struct tcf_proto *tp, unsigned long base,
u32 handle, struct nlattr **tca,
sched, cls: check if we could overwrite actions when changing a filter When actions are attached to a filter, they are a part of the filter itself, so when changing a filter we should allow to overwrite the actions inside as well. In my specific case, when I tried to _append_ a new action to an existing filter which already has an action, I got EEXIST since kernel refused to overwrite the existing one in kernel. This patch checks if we are changing the filter checking NLM_F_CREATE flag (Sigh, filters don't use NLM_F_REPLACE...) and then passes the boolean down to actions. This fixes the problem above. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 04:54:06 +08:00
unsigned long *arg, bool ovr)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
{
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct cls_bpf_head *head = rtnl_dereference(tp->root);
struct cls_bpf_prog *oldprog = (struct cls_bpf_prog *) *arg;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct nlattr *tb[TCA_BPF_MAX + 1];
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct cls_bpf_prog *prog;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
int ret;
if (tca[TCA_OPTIONS] == NULL)
return -EINVAL;
ret = nla_parse_nested(tb, TCA_BPF_MAX, tca[TCA_OPTIONS], bpf_policy);
if (ret < 0)
return ret;
prog = kzalloc(sizeof(*prog), GFP_KERNEL);
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
if (!prog)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
return -ENOBUFS;
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
ret = tcf_exts_init(&prog->exts, TCA_BPF_ACT, TCA_BPF_POLICE);
if (ret < 0)
goto errout;
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
if (oldprog) {
if (handle && oldprog->handle != handle) {
ret = -EINVAL;
goto errout;
}
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (handle == 0)
prog->handle = cls_bpf_grab_new_handle(tp, head);
else
prog->handle = handle;
if (prog->handle == 0) {
ret = -EINVAL;
goto errout;
}
net sched: stylistic cleanups Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18 20:45:33 +08:00
ret = cls_bpf_modify_existing(net, tp, prog, base, tb, tca[TCA_RATE],
ovr);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (ret < 0)
goto errout;
net: cls_bpf: add support for marking filters as hardware-only Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:55 +08:00
ret = cls_bpf_offload(tp, prog, oldprog);
if (ret) {
cls_bpf_delete_prog(tp, prog);
return ret;
}
net: cls_bpf: add hardware offload This patch adds hardware offload capability to cls_bpf classifier, similar to what have been done with U32 and flower. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:53 +08:00
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
if (oldprog) {
sched: cls_bpf: fix panic on filter replace The following test case causes a NULL pointer dereference in cls_bpf: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ bpf bytecode "$FOO" flowid 1:1 action drop The problem is that commit 1f947bf151e9 ("net: sched: rcu'ify cls_bpf") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 1f947bf151e9 ("net: sched: rcu'ify cls_bpf") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-18 04:38:43 +08:00
list_replace_rcu(&oldprog->link, &prog->link);
net: sched: do not use tcf_proto 'tp' argument from call_rcu Using the tcf_proto pointer 'tp' from inside the classifiers callback is not valid because it may have been cleaned up by another call_rcu occuring on another CPU. 'tp' is currently being used by tcf_unbind_filter() in this patch we move instances of tcf_unbind_filter outside of the call_rcu() context. This is safe to do because any running schedulers will either read the valid class field or it will be zeroed. And all schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. Reported-by: Cong Wang <xiyou.wangconf@gmail.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 12:28:52 +08:00
tcf_unbind_filter(tp, &oldprog->res);
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
call_rcu(&oldprog->rcu, __cls_bpf_delete_prog);
} else {
list_add_rcu(&prog->link, &head->plist);
}
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
*arg = (unsigned long) prog;
return 0;
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
errout:
net_sched: properly handle failure case of tcf_exts_init() After commit 22dc13c837c3 ("net_sched: convert tcf_exts from list to pointer array") we do dynamic allocation in tcf_exts_init(), therefore we need to handle the ENOMEM case properly. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20 03:36:54 +08:00
tcf_exts_destroy(&prog->exts);
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
kfree(prog);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
return ret;
}
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
static int cls_bpf_dump_bpf_info(const struct cls_bpf_prog *prog,
struct sk_buff *skb)
{
struct nlattr *nla;
if (nla_put_u16(skb, TCA_BPF_OPS_LEN, prog->bpf_num_ops))
return -EMSGSIZE;
nla = nla_reserve(skb, TCA_BPF_OPS, prog->bpf_num_ops *
sizeof(struct sock_filter));
if (nla == NULL)
return -EMSGSIZE;
memcpy(nla_data(nla), prog->bpf_ops, nla_len(nla));
return 0;
}
static int cls_bpf_dump_ebpf_info(const struct cls_bpf_prog *prog,
struct sk_buff *skb)
{
if (nla_put_u32(skb, TCA_BPF_FD, prog->bpf_fd))
return -EMSGSIZE;
if (prog->bpf_name &&
nla_put_string(skb, TCA_BPF_NAME, prog->bpf_name))
return -EMSGSIZE;
return 0;
}
net_sched: add struct net pointer to tcf_proto_ops->dump It will be needed by the next patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 08:14:01 +08:00
static int cls_bpf_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct sk_buff *skb, struct tcmsg *tm)
{
struct cls_bpf_prog *prog = (struct cls_bpf_prog *) fh;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
struct nlattr *nest;
cls_bpf: also dump TCA_BPF_FLAGS In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we have added TCA_BPF_FLAGS. We can also retrieve this information from the prog, dump it back to user space as well. It's useful in tc when displaying/dumping filter info. Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict from a rebase and it's unused here (later work may add it along with a real user). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:46 +08:00
u32 bpf_flags = 0;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
int ret;
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (prog == NULL)
return skb->len;
tm->tcm_handle = prog->handle;
nest = nla_nest_start(skb, TCA_OPTIONS);
if (nest == NULL)
goto nla_put_failure;
cls_bpf: make binding to classid optional The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:47 +08:00
if (prog->res.classid &&
nla_put_u32(skb, TCA_BPF_CLASSID, prog->res.classid))
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
goto nla_put_failure;
cls_bpf: add initial eBPF support for programmable classifiers This work extends the "classic" BPF programmable tc classifier by extending its scope also to native eBPF code! This allows for user space to implement own custom, 'safe' C like classifiers (or whatever other frontend language LLVM et al may provide in future), that can then be compiled with the LLVM eBPF backend to an eBPF elf file. The result of this can be loaded into the kernel via iproute2's tc. In the kernel, they can be JITed on major archs and thus run in native performance. Simple, minimal toy example to demonstrate the workflow: #include <linux/ip.h> #include <linux/if_ether.h> #include <linux/bpf.h> #include "tc_bpf_api.h" __section("classify") int cls_main(struct sk_buff *skb) { return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos)); } char __license[] __section("license") = "GPL"; The classifier can then be compiled into eBPF opcodes and loaded via tc, for example: clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o tc filter add dev em1 parent 1: bpf cls.o [...] As it has been demonstrated, the scope can even reach up to a fully fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c). For tc, maps are allowed to be used, but from kernel context only, in other words, eBPF code can keep state across filter invocations. In future, we perhaps may reattach from a different application to those maps e.g., to read out collected statistics/state. Similarly as in socket filters, we may extend functionality for eBPF classifiers over time depending on the use cases. For that purpose, cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so we can allow additional functions/accessors (e.g. an ABI compatible offset translation to skb fields/metadata). For an initial cls_bpf support, we allow the same set of helper functions as eBPF socket filters, but we could diverge at some point in time w/o problem. I was wondering whether cls_bpf and act_bpf could share C programs, I can imagine that at some point, we introduce i) further common handlers for both (or even beyond their scope), and/or if truly needed ii) some restricted function space for each of them. Both can be abstracted easily through struct bpf_verifier_ops in future. The context of cls_bpf versus act_bpf is slightly different though: a cls_bpf program will return a specific classid whereas act_bpf a drop/non-drop return code, latter may also in future mangle skbs. That said, we can surely have a "classify" and "action" section in a single object file, or considered mentioned constraint add a possibility of a shared section. The workflow for getting native eBPF running from tc [1] is as follows: for f_bpf, I've added a slightly modified ELF parser code from Alexei's kernel sample, which reads out the LLVM compiled object, sets up maps (and dynamically fixes up map fds) if any, and loads the eBPF instructions all centrally through the bpf syscall. The resulting fd from the loaded program itself is being passed down to cls_bpf, which looks up struct bpf_prog from the fd store, and holds reference, so that it stays available also after tc program lifetime. On tc filter destruction, it will then drop its reference. Moreover, I've also added the optional possibility to annotate an eBPF filter with a name (e.g. path to object file, or something else if preferred) so that when tc dumps currently installed filters, some more context can be given to an admin for a given instance (as opposed to just the file descriptor number). Last but not least, bpf_prog_get() and bpf_prog_put() needed to be exported, so that eBPF can be used from cls_bpf built as a module. Thanks to 60a3b2253c41 ("net: bpf: make eBPF interpreter images read-only") I think this is of no concern since anything wanting to alter eBPF opcode after verification stage would crash the kernel. [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01 19:31:48 +08:00
if (cls_bpf_is_ebpf(prog))
ret = cls_bpf_dump_ebpf_info(prog, skb);
else
ret = cls_bpf_dump_bpf_info(prog, skb);
if (ret)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
goto nla_put_failure;
net_sched: cls: refactor out struct tcf_ext_map These information can be saved in tcf_exts, and this will simplify the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-16 12:15:07 +08:00
if (tcf_exts_dump(skb, &prog->exts) < 0)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
goto nla_put_failure;
cls_bpf: also dump TCA_BPF_FLAGS In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we have added TCA_BPF_FLAGS. We can also retrieve this information from the prog, dump it back to user space as well. It's useful in tc when displaying/dumping filter info. Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict from a rebase and it's unused here (later work may add it along with a real user). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:46 +08:00
if (prog->exts_integrated)
bpf_flags |= TCA_BPF_FLAG_ACT_DIRECT;
if (bpf_flags && nla_put_u32(skb, TCA_BPF_FLAGS, bpf_flags))
goto nla_put_failure;
net: cls_bpf: limit hardware offload by software-only flag Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_HW flag. Unlike U32 and flower cls_bpf already has some netlink flags defined. Create a new attribute to be able to use the same flag values as the above. Unlike U32 and flower reject unknown flags. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 18:43:54 +08:00
if (prog->gen_flags &&
nla_put_u32(skb, TCA_BPF_FLAGS_GEN, prog->gen_flags))
goto nla_put_failure;
cls_bpf: also dump TCA_BPF_FLAGS In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we have added TCA_BPF_FLAGS. We can also retrieve this information from the prog, dump it back to user space as well. It's useful in tc when displaying/dumping filter info. Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict from a rebase and it's unused here (later work may add it along with a real user). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 03:56:46 +08:00
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
nla_nest_end(skb, nest);
net_sched: cls: refactor out struct tcf_ext_map These information can be saved in tcf_exts, and this will simplify the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-16 12:15:07 +08:00
if (tcf_exts_dump_stats(skb, &prog->exts) < 0)
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
goto nla_put_failure;
return skb->len;
nla_put_failure:
nla_nest_cancel(skb, nest);
return -1;
}
static void cls_bpf_walk(struct tcf_proto *tp, struct tcf_walker *arg)
{
net: sched: rcu'ify cls_bpf This patch makes the cls_bpf classifier RCU safe. The tcf_lock was being used to protect a list of cls_bpf_prog now this list is RCU safe and updates occur with rcu_replace. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 11:10:24 +08:00
struct cls_bpf_head *head = rtnl_dereference(tp->root);
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
struct cls_bpf_prog *prog;
net_sched: cls_bpf: remove faulty use of list_for_each_entry_rcu rcu variant is not correct here. The code is called by updater (rtnl lock is held), not by reader (no rcu_read_lock is held). Signed-off-by: Jiri Pirko <jiri@resnulli.us> ACKed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 01:00:33 +08:00
list_for_each_entry(prog, &head->plist, link) {
net: sched: cls_bpf: add BPF-based classifier This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 23:43:02 +08:00
if (arg->count < arg->skip)
goto skip;
if (arg->fn(tp, (unsigned long) prog, arg) < 0) {
arg->stop = 1;
break;
}
skip:
arg->count++;
}
}
static struct tcf_proto_ops cls_bpf_ops __read_mostly = {
.kind = "bpf",
.owner = THIS_MODULE,
.classify = cls_bpf_classify,
.init = cls_bpf_init,
.destroy = cls_bpf_destroy,
.get = cls_bpf_get,
.change = cls_bpf_change,
.delete = cls_bpf_delete,
.walk = cls_bpf_walk,
.dump = cls_bpf_dump,
};
static int __init cls_bpf_init_mod(void)
{
return register_tcf_proto_ops(&cls_bpf_ops);
}
static void __exit cls_bpf_exit_mod(void)
{
unregister_tcf_proto_ops(&cls_bpf_ops);
}
module_init(cls_bpf_init_mod);
module_exit(cls_bpf_exit_mod);