UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/configs/imx_v6_v7_defconfig

298 lines
6.8 KiB
Plaintext
Raw Normal View History

mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_LOCALVERSION_AUTO is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_KERNEL_LZO=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_SYSVIPC=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_LOG_BUF_SHIFT=18
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_CGROUPS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_RELAY=y
ARM: imx: update imx_v6_v7_defconfig It adds CONFIG_BLK_DEV_INITRD and runs savedefconfig. The resulted can boot Linaro rootfs out of box. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-31 16:43:24 +08:00
CONFIG_BLK_DEV_INITRD=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 06:44:16 +08:00
CONFIG_EXPERT=y
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS Select CONFIG_PERF_EVENTS so that oprofile can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-16 01:32:01 +08:00
CONFIG_PERF_EVENTS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
ARM: imx: enable multi-platform build It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-17 09:38:39 +08:00
CONFIG_ARCH_MULTI_V6=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_ARCH_MXC=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_MACH_IMX31_DT=y
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support Let MX35 and MX50 device tree support be built by default. Generated by doing: - Selected CONFIG_MACH_IMX35_DT and CONFIG_SOC_IMX50 via 'make menuconfig' - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-23 23:27:58 +08:00
CONFIG_MACH_IMX35_DT=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_MACH_EUKREA_CPUIMX51SD=y
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support Let MX35 and MX50 device tree support be built by default. Generated by doing: - Selected CONFIG_MACH_IMX35_DT and CONFIG_SOC_IMX50 via 'make menuconfig' - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-23 23:27:58 +08:00
CONFIG_SOC_IMX50=y
ARM: imx53: support device tree boot only With device tree kernel provides the equal support as those imx53 board files, it's time to remove the board files and get imx53 support device tree only. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 23:21:39 +08:00
CONFIG_SOC_IMX53=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_SOC_IMX6Q=y
ARM: imx: Enable mx6 solo-lite support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-24 07:41:48 +08:00
CONFIG_SOC_IMX6SL=y
ARM: imx_v6_v7_defconfig: Enable Vybrid VF610 Let VF610 SoC support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-16 06:14:33 +08:00
CONFIG_SOC_VF610=y
ARM: imx_v6_v7_defconfig: Select PCI support Let PCI driver be enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-30 21:12:01 +08:00
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_SMP=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_VMSPLIT_2G=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
ARM: imx_v6_v7_defconfig: Select CONFIG_HIGHMEM Booting a mx6q wandboard with 2GB of RAM we see the following on boot: Booting Linux on physical CPU 0x0 Linux version 3.12.0-next-20131112+ (fabio@fabio-Latitude-E6410) (gcc version 43 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Wandboard i.MX6 Quad Board Truncating RAM at 10000000-8fffffff to -7f7fffff (vmalloc region overlap) ... Select CONFIG_HIGHMEM to avoid the vmalloc region overlap. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-13 06:39:12 +08:00
CONFIG_HIGHMEM=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=m
ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default Enable imx-wm8962 and PM_RUNTIME, essential for WM8962 CODEC driver. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 19:51:04 +08:00
CONFIG_PM_RUNTIME=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_PM_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_IPV6=y
ARM: imx: configs: enable netfilter support The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-05 16:33:19 +08:00
CONFIG_NETFILTER=y
ARM: imx_v6_v7_defconfig: Enable wireless support Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-01 00:15:04 +08:00
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
# CONFIG_STANDALONE is not set
ARM: imx_v6_v7_defconfig: enable WEIM driver enable the weim driver. Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto, we also enable the MTD_PHYSMAP_OF module. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-08 15:16:03 +08:00
CONFIG_IMX_WEIM=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_CONNECTOR=y
ARM: imx_v6_v7_defconfig: Add SPI NOR support Add SPI NOR support in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-27 12:05:02 +08:00
CONFIG_MTD=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
ARM: imx_v6_v7_defconfig: enable WEIM driver enable the weim driver. Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto, we also enable the MTD_PHYSMAP_OF module. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-08 15:16:03 +08:00
CONFIG_MTD_PHYSMAP_OF=y
ARM: imx_v6_v7_defconfig: Add SPI NOR support Add SPI NOR support in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-27 12:05:02 +08:00
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_ATA=y
ARM: imx_v6_v7_defconfig: Add SATA support Let SATA support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:16 +08:00
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_IMX=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_PATA_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_NETDEVICES=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
# CONFIG_NET_VENDOR_BROADCOM is not set
CS89x0 : add CS89x0 platform device to the iMX31ADS board Add CS89x0 networking support to the iMX31ADS board by using the platform driver support in the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-27 04:47:27 +08:00
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: imx: update imx_v6_v7_defconfig Update the IMX v6/v7 defconfig for the SolidRun HummingBoard: - Add AT803X ethernet phy - Add consumer IR devices Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-18 03:42:47 +08:00
CONFIG_AT803X_PHY=y
ARM: imx_v6_v7_defconfig: Enable wireless support Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-01 00:15:04 +08:00
CONFIG_BRCMFMAC=m
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_KEYBOARD_GPIO=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_KEYBOARD_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX egalax touchscren controller is present on mx6 sabresd/sabrelite, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-25 04:20:04 +08:00
CONFIG_TOUCHSCREEN_EGALAX=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_TOUCHSCREEN_MC13783=y
ARM: imx_v6_v7_defconfig: Enable tsc2007 support. The eukrea cpuimx35 and cpuimx51 have a tsc2007 touchscreen controller, so we turn it on. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-31 01:58:43 +08:00
CONFIG_TOUCHSCREEN_TSC2007=y
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen Enable STMPE touchscreen support as this is used on M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-17 09:19:41 +08:00
CONFIG_TOUCHSCREEN_STMPE=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_SERIO_SERPORT=m
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
# CONFIG_LEGACY_PTYS is not set
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
ARM: imx_v6_v7_defconfig: Enable FSL_LPUART support Enable the FSL_LPUART driver as it is used by the VF610 family. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-27 20:48:41 +08:00
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_HW_RANDOM=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_HW_RANDOM_MXC_RNGA=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_I2C_COMPAT is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_I2C_CHARDEV=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_GPIO_SYSFS=y
ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 On mx35pdk board there is an 8-bit microcontroller that controls several IOs, such as backlight enable pin, USB host VBUS, etc. Let it build by default. mx35pdk also needs CONFIG_LCD_PLATFORM to be selected to activate the display, so also make this the default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-09-15 02:25:45 +08:00
CONFIG_GPIO_MC9S08DZ60=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_HWMON is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
ARM: imx_v6_v7_defconfig: Add DA9052 regulator support Add DA9052 regulator support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-09-27 07:27:37 +08:00
CONFIG_MFD_DA9052_I2C=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen Enable STMPE touchscreen support as this is used on M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-17 09:19:41 +08:00
CONFIG_MFD_STMPE=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_REGULATOR=y
ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE Some devices on some imx boards are supplied by fixed voltage, so build REGULATOR_FIXED_VOLTAGE support in. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27 15:36:38 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc Eanble anatop regulator and snvs rtc support which are very useful for imx6q build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:12:59 +08:00
CONFIG_REGULATOR_ANATOP=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_REGULATOR_DA9052=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_REGULATOR_MC13783=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_REGULATOR_MC13892=y
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 PFUZE100 regulator is commonly found on mx6 based designs. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-24 11:04:50 +08:00
CONFIG_REGULATOR_PFUZE100=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_MEDIA_SUPPORT=y
ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORT Since commit b4c184e5 (edia] media: reorganize the main Kconfig items), it is necessary to select CONFIG_MEDIA_CAMERA_SUPPORT in order to be able to use the SoC camera drivers. Select CONFIG_MEDIA_CAMERA_SUPPORT so that we can use mx2-camera/mx3-camera by default as previously. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-10-08 01:44:17 +08:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: imx: update imx_v6_v7_defconfig Update the IMX v6/v7 defconfig for the SolidRun HummingBoard: - Add AT803X ethernet phy - Add consumer IR devices Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-18 03:42:47 +08:00
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_MX3=y
ARM: imx_v6_v7_defconfig: Enable VPU driver Let VPU driver be selected by default. VPU driver requires a SRAM pool, so select CONFIG_SRAM as well. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-29 06:49:19 +08:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_DRM=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_LCD_PLATFORM=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
ARM: imx_v6_v7_defconfig: Enable PWM and backlight options These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-06 23:56:30 +08:00
CONFIG_BACKLIGHT_PWM=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 23:40:21 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default Enable imx-wm8962 and PM_RUNTIME, essential for WM8962 CODEC driver. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 19:51:04 +08:00
CONFIG_SND_SOC_IMX_WM8962=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_SND_SOC_IMX_SGTL5000=y
ARM: imx_v6_v7_defconfig: Add SPDIF support Generated by doing: make imx_v6_v7_defconfig Manually selected the IMX_SPDIF driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-29 04:27:06 +08:00
CONFIG_SND_SOC_IMX_SPDIF=y
ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-12 19:55:53 +08:00
CONFIG_SND_SOC_IMX_MC13783=y
mx5: Add USB to Freescale MX51 defconfig Update mx51_defconfig to include USB EHCI by default. This patch applies to 2.6.34-rc6. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-01 04:48:27 +08:00
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_USB_STORAGE=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-09 06:06:29 +08:00
CONFIG_USB_CHIPIDEA=y
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-29 04:27:07 +08:00
CONFIG_USB_CHIPIDEA_UDC=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-09 06:06:29 +08:00
CONFIG_USB_CHIPIDEA_HOST=y
ARM: imx_v6_v7_defconfig: Select CONFIG_NOP_USB_XCEIV by default In order to get USB functionality on mx5 boards, we need to select CONFIG_NOP_USB_XCEIV option, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-25 09:50:17 +08:00
CONFIG_NOP_USB_XCEIV=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-09 06:06:29 +08:00
CONFIG_USB_MXS_PHY=y
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-29 04:27:07 +08:00
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_MMC=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 15:15:30 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_NEW_LEDS=y
ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y' This patch is to fix the warning below. arch/arm/configs/mx51_defconfig:113:warning: symbol value 'm' invalid for LEDS_CLASS Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-23 16:06:55 +08:00
CONFIG_LEDS_CLASS=y
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-10 05:02:03 +08:00
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_RTC_DRV_MC13XXX=y
rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 06:07:37 +08:00
CONFIG_RTC_DRV_MXC=y
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc Eanble anatop regulator and snvs rtc support which are very useful for imx6q build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:12:59 +08:00
CONFIG_RTC_DRV_SNVS=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 23:40:37 +08:00
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
ARM: imx: gpmi-nand depends on mxs-dma It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de>
2012-08-04 18:48:12 +08:00
CONFIG_MXS_DMA=y
ARM: imx_v6_v7_defconfig: Select IPUV3 driver Let IPUV3 driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 20:07:52 +08:00
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
ARM: imx_v6_v7_defconfig: enable parallel display Enable paralell display by default Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-24 22:09:31 +08:00
CONFIG_DRM_IMX_FB_HELPER=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
ARM: imx_v6_v7_defconfig: Select IPUV3 driver Let IPUV3 driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 20:07:52 +08:00
CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
ARM: imx_v6_v7_defconfig: Enable PWM and backlight options These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-06 23:56:30 +08:00
CONFIG_PWM=y
CONFIG_PWM_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
ARM: mx51_defconfig: add new boards MACH_MX51_3DS and MACH_EUKREA_CPUIMX51 Further remove FIXED_PHY as it breaks the ethernet. VGA_CONSOLE isn't selectable anymore since fb78b51cb11e. EXT3_DEFAULTS_TO_ORDERED defaults to y since aa32a796389b. INOTIFY is gone since 2dfc1cae4c42. CONFIG_DETECT_SOFTLOCKUP is gone since e16bb1d7fe07. Enable TMPFS for udev. KEYS is selected by NFS_USE_KERNEL_DNS Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 16:46:15 +08:00
CONFIG_TMPFS=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 00:52:08 +08:00
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
mx51: Let USB Storage be built by default Let USB Storage be built by default. Also select NLS_ISO8859 so that the USB device can be mounted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-28 22:11:34 +08:00
CONFIG_NLS_ISO8859_1=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING This is very useful for detecting 'circular locking dependency' issues. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-10 07:40:27 +08:00
CONFIG_PROVE_LOCKING=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 06:57:20 +08:00
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_SECURITYFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 11:04:15 +08:00
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y