UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/spi/spi-fsl-espi.c

822 lines
21 KiB
C
Raw Normal View History

spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/*
* Freescale eSPI controller driver.
*
* Copyright 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/delay.h>
spi: fsl: Sort include headers alphabetically Sort all the include headers alphabetically for the freescale spi drivers. If the inlcude headers sorted out of order, maybe the best logical choice is to append new ones after the exist ones, while this may create a lot of potential for duplicates and conflicts for each diffenent changes will add new headers in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 10:57:06 +08:00
#include <linux/err.h>
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#include <linux/fsl_devices.h>
spi: fsl: Sort include headers alphabetically Sort all the include headers alphabetically for the freescale spi drivers. If the inlcude headers sorted out of order, maybe the best logical choice is to append new ones after the exist ones, while this may create a lot of potential for duplicates and conflicts for each diffenent changes will add new headers in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 10:57:06 +08:00
#include <linux/interrupt.h>
#include <linux/module.h>
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#include <linux/mm.h>
#include <linux/of.h>
drivers: clean-up prom.h implicit includes Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-09-18 03:28:33 +08:00
#include <linux/of_address.h>
#include <linux/of_irq.h>
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#include <linux/of_platform.h>
spi: fsl: Sort include headers alphabetically Sort all the include headers alphabetically for the freescale spi drivers. If the inlcude headers sorted out of order, maybe the best logical choice is to append new ones after the exist ones, while this may create a lot of potential for duplicates and conflicts for each diffenent changes will add new headers in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 10:57:06 +08:00
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
#include <linux/pm_runtime.h>
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#include <sysdev/fsl_soc.h>
spi: reorganize drivers Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-06 15:16:30 +08:00
#include "spi-fsl-lib.h"
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* eSPI Controller registers */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
#define ESPI_SPMODE 0x00 /* eSPI mode register */
#define ESPI_SPIE 0x04 /* eSPI event register */
#define ESPI_SPIM 0x08 /* eSPI mask register */
#define ESPI_SPCOM 0x0c /* eSPI command register */
#define ESPI_SPITF 0x10 /* eSPI transmit FIFO access register*/
#define ESPI_SPIRF 0x14 /* eSPI receive FIFO access register*/
#define ESPI_SPMODE0 0x20 /* eSPI cs0 mode register */
#define ESPI_SPMODEx(x) (ESPI_SPMODE0 + (x) * 4)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* eSPI Controller mode register definitions */
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
#define SPMODE_ENABLE BIT(31)
#define SPMODE_LOOP BIT(30)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#define SPMODE_TXTHR(x) ((x) << 8)
#define SPMODE_RXTHR(x) ((x) << 0)
/* eSPI Controller CS mode register definitions */
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
#define CSMODE_CI_INACTIVEHIGH BIT(31)
#define CSMODE_CP_BEGIN_EDGECLK BIT(30)
#define CSMODE_REV BIT(29)
#define CSMODE_DIV16 BIT(28)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#define CSMODE_PM(x) ((x) << 24)
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
#define CSMODE_POL_1 BIT(20)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#define CSMODE_LEN(x) ((x) << 16)
#define CSMODE_BEF(x) ((x) << 12)
#define CSMODE_AFT(x) ((x) << 8)
#define CSMODE_CG(x) ((x) << 3)
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
#define FSL_ESPI_FIFO_SIZE 32
spi: fsl-espi: make better use of the RX FIFO So far an interrupt is triggered whenever there's at least one byte in the RX FIFO. This results in a unnecessarily high number of interrupts. Change this to generate an interrupt if - RX FIFO is half full (except if all bytes to read fit into the RX FIFO anyway) - end of transfer has been reached This way the number of interrupts can be significantly reduced. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:27:56 +08:00
#define FSL_ESPI_RXTHR 15
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* Default mode/csmode for eSPI controller */
spi: fsl-espi: make better use of the RX FIFO So far an interrupt is triggered whenever there's at least one byte in the RX FIFO. This results in a unnecessarily high number of interrupts. Change this to generate an interrupt if - RX FIFO is half full (except if all bytes to read fit into the RX FIFO anyway) - end of transfer has been reached This way the number of interrupts can be significantly reduced. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:27:56 +08:00
#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(FSL_ESPI_RXTHR))
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \
| CSMODE_AFT(0) | CSMODE_CG(1))
/* SPIE register values */
#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F)
#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F)
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
#define SPIE_TXE BIT(15) /* TX FIFO empty */
#define SPIE_DON BIT(14) /* TX done */
#define SPIE_RXT BIT(13) /* RX FIFO threshold */
#define SPIE_RXF BIT(12) /* RX FIFO full */
#define SPIE_TXT BIT(11) /* TX FIFO threshold*/
#define SPIE_RNE BIT(9) /* RX FIFO not empty */
#define SPIE_TNF BIT(8) /* TX FIFO not full */
/* SPIM register values */
#define SPIM_TXE BIT(15) /* TX FIFO empty */
#define SPIM_DON BIT(14) /* TX done */
#define SPIM_RXT BIT(13) /* RX FIFO threshold */
#define SPIM_RXF BIT(12) /* RX FIFO full */
#define SPIM_TXT BIT(11) /* TX FIFO threshold*/
#define SPIM_RNE BIT(9) /* RX FIFO not empty */
#define SPIM_TNF BIT(8) /* TX FIFO not full */
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* SPCOM register values */
#define SPCOM_CS(x) ((x) << 30)
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
#define SPCOM_DO BIT(28) /* Dual output */
#define SPCOM_TO BIT(27) /* TX only */
#define SPCOM_RXSKIP(x) ((x) << 16)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
#define SPCOM_TRANLEN(x) ((x) << 0)
spi: fsl-espi: improve and extend register bit definitions Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:06 +08:00
spi/fsl-espi: Correct the maximum transaction length The maximum length during one transcation is 64KiB. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22 18:58:26 +08:00
#define SPCOM_TRANLEN_MAX 0x10000 /* Max transaction length */
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
#define AUTOSUSPEND_TIMEOUT 2000
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
static inline u32 fsl_espi_read_reg(struct mpc8xxx_spi *mspi, int offset)
{
return ioread32be(mspi->reg_base + offset);
}
static inline u8 fsl_espi_read_reg8(struct mpc8xxx_spi *mspi, int offset)
{
return ioread8(mspi->reg_base + offset);
}
static inline void fsl_espi_write_reg(struct mpc8xxx_spi *mspi, int offset,
u32 val)
{
iowrite32be(val, mspi->reg_base + offset);
}
static inline void fsl_espi_write_reg8(struct mpc8xxx_spi *mspi, int offset,
u8 val)
{
iowrite8(val, mspi->reg_base + offset);
}
spi: fsl-espi: fix handling of word sizes other than 8 bit The code in fsl_espi_tx_buf_lsb and parts of fsl_espi_setup_transfer look very weird and don't reflect the ESPI spec. ESPI stores values with <= 8 bit word size right justified as 8 bit value and values with > 8 bit word size right justified as 16 bit value. Therefore no such shifting is needed. Only case MSB-first with 8 bit word size is correctly handled, and most likely nobody ever used this driver with a different config. On ESPI only the case LSB-first with word size > 8 bit needs a special handling. In this case a little endian 16 bit value has to be written to the TX FIFO what requires a byte swap as the host system is big endian. The same applies to reading from the RX FIFO. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 20:22:57 +08:00
static void fsl_espi_memcpy_swab(void *to, const void *from,
struct spi_message *m,
struct spi_transfer *t)
{
unsigned int len = t->len;
if (!(m->spi->mode & SPI_LSB_FIRST) || t->bits_per_word <= 8) {
memcpy(to, from, len);
return;
}
/* In case of LSB-first and bits_per_word > 8 byte-swap all words */
while (len)
if (len >= 4) {
*(u32 *)to = swahb32p(from);
to += 4;
from += 4;
len -= 4;
} else {
*(u16 *)to = swab16p(from);
to += 2;
from += 2;
len -= 2;
}
}
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
static void fsl_espi_copy_to_buf(struct spi_message *m,
struct mpc8xxx_spi *mspi)
spi: fsl-espi: factor out filling the local buffer Better structure the code by factoring out filling the local buffer. In addition don't initialize the complete local buffer at the beginning of fsl_espi_do_one_msg. Instead move initialization of those parts of the local buffer to be used for transfers w/o tx_buf to fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:50:53 +08:00
{
struct spi_transfer *t;
u8 *buf = mspi->local_buf;
list_for_each_entry(t, &m->transfers, transfer_list) {
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
if (t->tx_buf)
spi: fsl-espi: fix handling of word sizes other than 8 bit The code in fsl_espi_tx_buf_lsb and parts of fsl_espi_setup_transfer look very weird and don't reflect the ESPI spec. ESPI stores values with <= 8 bit word size right justified as 8 bit value and values with > 8 bit word size right justified as 16 bit value. Therefore no such shifting is needed. Only case MSB-first with 8 bit word size is correctly handled, and most likely nobody ever used this driver with a different config. On ESPI only the case LSB-first with word size > 8 bit needs a special handling. In this case a little endian 16 bit value has to be written to the TX FIFO what requires a byte swap as the host system is big endian. The same applies to reading from the RX FIFO. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 20:22:57 +08:00
fsl_espi_memcpy_swab(buf, t->tx_buf, m, t);
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
/* In RXSKIP mode controller shifts out zeros internally */
else if (!mspi->rxskip)
spi: fsl-espi: factor out filling the local buffer Better structure the code by factoring out filling the local buffer. In addition don't initialize the complete local buffer at the beginning of fsl_espi_do_one_msg. Instead move initialization of those parts of the local buffer to be used for transfers w/o tx_buf to fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:50:53 +08:00
memset(buf, 0, t->len);
buf += t->len;
}
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
}
static void fsl_espi_copy_from_buf(struct spi_message *m,
struct mpc8xxx_spi *mspi)
{
struct spi_transfer *t;
u8 *buf = mspi->local_buf;
spi: fsl-espi: factor out filling the local buffer Better structure the code by factoring out filling the local buffer. In addition don't initialize the complete local buffer at the beginning of fsl_espi_do_one_msg. Instead move initialization of those parts of the local buffer to be used for transfers w/o tx_buf to fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:50:53 +08:00
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
list_for_each_entry(t, &m->transfers, transfer_list) {
if (t->rx_buf)
spi: fsl-espi: fix handling of word sizes other than 8 bit The code in fsl_espi_tx_buf_lsb and parts of fsl_espi_setup_transfer look very weird and don't reflect the ESPI spec. ESPI stores values with <= 8 bit word size right justified as 8 bit value and values with > 8 bit word size right justified as 16 bit value. Therefore no such shifting is needed. Only case MSB-first with 8 bit word size is correctly handled, and most likely nobody ever used this driver with a different config. On ESPI only the case LSB-first with word size > 8 bit needs a special handling. In this case a little endian 16 bit value has to be written to the TX FIFO what requires a byte swap as the host system is big endian. The same applies to reading from the RX FIFO. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 20:22:57 +08:00
fsl_espi_memcpy_swab(t->rx_buf, buf, m, t);
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
buf += t->len;
}
spi: fsl-espi: factor out filling the local buffer Better structure the code by factoring out filling the local buffer. In addition don't initialize the complete local buffer at the beginning of fsl_espi_do_one_msg. Instead move initialization of those parts of the local buffer to be used for transfers w/o tx_buf to fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:50:53 +08:00
}
spi: fsl-espi: factor out initial message checking Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:38 +08:00
static int fsl_espi_check_message(struct spi_message *m)
{
struct mpc8xxx_spi *mspi = spi_master_get_devdata(m->spi->master);
struct spi_transfer *t, *first;
if (m->frame_length > SPCOM_TRANLEN_MAX) {
dev_err(mspi->dev, "message too long, size is %u bytes\n",
m->frame_length);
return -EMSGSIZE;
}
first = list_first_entry(&m->transfers, struct spi_transfer,
transfer_list);
spi: fsl-espi: reject MSB-first transfers with word sizes other than 8 or 16 According to the ESPI spec MSB-first transfers are supported for word size 8 and 16 only. Check for this and reject MSB-first transfers with other word sizes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 20:22:35 +08:00
spi: fsl-espi: factor out initial message checking Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:38 +08:00
list_for_each_entry(t, &m->transfers, transfer_list) {
if (first->bits_per_word != t->bits_per_word ||
first->speed_hz != t->speed_hz) {
dev_err(mspi->dev, "bits_per_word/speed_hz should be the same for all transfers\n");
return -EINVAL;
}
}
spi: fsl-espi: reject MSB-first transfers with word sizes other than 8 or 16 According to the ESPI spec MSB-first transfers are supported for word size 8 and 16 only. Check for this and reject MSB-first transfers with other word sizes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 20:22:35 +08:00
/* ESPI supports MSB-first transfers for word size 8 / 16 only */
if (!(m->spi->mode & SPI_LSB_FIRST) && first->bits_per_word != 8 &&
first->bits_per_word != 16) {
dev_err(mspi->dev,
"MSB-first transfer not supported for wordsize %u\n",
first->bits_per_word);
return -EINVAL;
}
spi: fsl-espi: factor out initial message checking Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:38 +08:00
return 0;
}
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
static unsigned int fsl_espi_check_rxskip_mode(struct spi_message *m)
{
struct spi_transfer *t;
unsigned int i = 0, rxskip = 0;
/*
* prerequisites for ESPI rxskip mode:
* - message has two transfers
* - first transfer is a write and second is a read
*
* In addition the current low-level transfer mechanism requires
* that the rxskip bytes fit into the TX FIFO. Else the transfer
* would hang because after the first FSL_ESPI_FIFO_SIZE bytes
* the TX FIFO isn't re-filled.
*/
list_for_each_entry(t, &m->transfers, transfer_list) {
if (i == 0) {
if (!t->tx_buf || t->rx_buf ||
t->len > FSL_ESPI_FIFO_SIZE)
return 0;
rxskip = t->len;
} else if (i == 1) {
if (t->tx_buf || !t->rx_buf)
return 0;
}
i++;
}
return i == 2 ? rxskip : 0;
}
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
static void fsl_espi_fill_tx_fifo(struct mpc8xxx_spi *mspi, u32 events)
{
u32 tx_fifo_avail;
/* if events is zero transfer has not started and tx fifo is empty */
tx_fifo_avail = events ? SPIE_TXCNT(events) : FSL_ESPI_FIFO_SIZE;
while (tx_fifo_avail >= min(4U, mspi->tx_len) && mspi->tx_len)
if (mspi->tx_len >= 4) {
fsl_espi_write_reg(mspi, ESPI_SPITF, *(u32 *)mspi->tx);
mspi->tx += 4;
mspi->tx_len -= 4;
tx_fifo_avail -= 4;
} else {
fsl_espi_write_reg8(mspi, ESPI_SPITF, *(u8 *)mspi->tx);
mspi->tx += 1;
mspi->tx_len -= 1;
tx_fifo_avail -= 1;
}
}
spi: fsl-espi: fix and improve reading from RX FIFO Currently the driver polls in the ISR for enough bytes in the RX FIFO. An ISR should never do this. Change it to read as much as possible whenever the ISR is called. This also allows to significantly simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:27:35 +08:00
static void fsl_espi_read_rx_fifo(struct mpc8xxx_spi *mspi, u32 events)
{
u32 rx_fifo_avail = SPIE_RXCNT(events);
while (rx_fifo_avail >= min(4U, mspi->rx_len) && mspi->rx_len)
if (mspi->rx_len >= 4) {
*(u32 *)mspi->rx = fsl_espi_read_reg(mspi, ESPI_SPIRF);
mspi->rx += 4;
mspi->rx_len -= 4;
rx_fifo_avail -= 4;
} else {
*(u8 *)mspi->rx = fsl_espi_read_reg8(mspi, ESPI_SPIRF);
mspi->rx += 1;
mspi->rx_len -= 1;
rx_fifo_avail -= 1;
}
}
spi: fsl-espi: change return type of fsl_espi_setup_transfer to void fsl_espi_setup_transfer always returns 0, so change the return type to void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-25 12:44:42 +08:00
static void fsl_espi_setup_transfer(struct spi_device *spi,
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
struct spi_transfer *t)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
spi: fsl-espi: simplify fsl_espi_setup_transfer If t is not null then the SPI core takes care that bits_per_word and speed_hz are populated. This allows to simplify fsl_espi_setup_transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:15:45 +08:00
int bits_per_word = t ? t->bits_per_word : spi->bits_per_word;
spi: fsl-espi: fix support for all available clock rates According to NXP ESPI datasheet, the SPI clock rate is: spi_clk = System_Clock / ( 2 * DIV16 * ( 1 + PM ) ) Where System_Clock is the platform clock divided by 2, DIV16 may be 1 or 16, and PM is a 4 bits integer (0 to 15). Isolating PM on the expression, we get: PM = (System_Clock / ( 2 * DIV16 * spi_clk ) ) - 1 Where System_Clock = mpc8xxx_spi->spibrg / 2, spi_clk = hz, and DIV16 = 1 or DIV16 = 16. So, PM = (mpc8xxx_spi->spibrg / ( 4 * hz) ) - 1 or PM = (mpc8xxx_spi->spibrg / ( 16 * 4 * hz) ) - 1 Current spi-fsl-espi driver can't configure the HW for all supported clock rates. It filters out clock rates for PM = 0 and PM = 1. This patch allows all range of supported clock rates to be configured on the ESPI controller. Signed-off-by: Paulo Zaneti <paulo.zaneti@datacom.ind.br> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 17:02:19 +08:00
u32 pm, hz = t ? t->speed_hz : spi->max_speed_hz;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
struct spi_mpc8xxx_cs *cs = spi->controller_state;
spi: fsl-espi: don't write ESPI_SPMODE register if the mode doesn't change There's no need to bother the chip if the mode doesn't change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-05 04:01:12 +08:00
u32 hw_mode_old = cs->hw_mode;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* mask out bits we are going to set */
cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF));
spi: fsl-espi: simplify fsl_espi_setup_transfer Simplify fsl_espi_setup_transfer a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-04 15:56:57 +08:00
cs->hw_mode |= CSMODE_LEN(bits_per_word - 1);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: fix support for all available clock rates According to NXP ESPI datasheet, the SPI clock rate is: spi_clk = System_Clock / ( 2 * DIV16 * ( 1 + PM ) ) Where System_Clock is the platform clock divided by 2, DIV16 may be 1 or 16, and PM is a 4 bits integer (0 to 15). Isolating PM on the expression, we get: PM = (System_Clock / ( 2 * DIV16 * spi_clk ) ) - 1 Where System_Clock = mpc8xxx_spi->spibrg / 2, spi_clk = hz, and DIV16 = 1 or DIV16 = 16. So, PM = (mpc8xxx_spi->spibrg / ( 4 * hz) ) - 1 or PM = (mpc8xxx_spi->spibrg / ( 16 * 4 * hz) ) - 1 Current spi-fsl-espi driver can't configure the HW for all supported clock rates. It filters out clock rates for PM = 0 and PM = 1. This patch allows all range of supported clock rates to be configured on the ESPI controller. Signed-off-by: Paulo Zaneti <paulo.zaneti@datacom.ind.br> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 17:02:19 +08:00
pm = DIV_ROUND_UP(mpc8xxx_spi->spibrg, hz * 4) - 1;
if (pm > 15) {
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
cs->hw_mode |= CSMODE_DIV16;
spi: fsl-espi: fix support for all available clock rates According to NXP ESPI datasheet, the SPI clock rate is: spi_clk = System_Clock / ( 2 * DIV16 * ( 1 + PM ) ) Where System_Clock is the platform clock divided by 2, DIV16 may be 1 or 16, and PM is a 4 bits integer (0 to 15). Isolating PM on the expression, we get: PM = (System_Clock / ( 2 * DIV16 * spi_clk ) ) - 1 Where System_Clock = mpc8xxx_spi->spibrg / 2, spi_clk = hz, and DIV16 = 1 or DIV16 = 16. So, PM = (mpc8xxx_spi->spibrg / ( 4 * hz) ) - 1 or PM = (mpc8xxx_spi->spibrg / ( 16 * 4 * hz) ) - 1 Current spi-fsl-espi driver can't configure the HW for all supported clock rates. It filters out clock rates for PM = 0 and PM = 1. This patch allows all range of supported clock rates to be configured on the ESPI controller. Signed-off-by: Paulo Zaneti <paulo.zaneti@datacom.ind.br> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 17:02:19 +08:00
pm = DIV_ROUND_UP(mpc8xxx_spi->spibrg, hz * 16 * 4) - 1;
WARN_ONCE(pm > 15,
"%s: Requested speed is too low: %u Hz. Will use %u Hz instead.\n",
dev_name(&spi->dev), hz,
mpc8xxx_spi->spibrg / (4 * 16 * (15 + 1)));
if (pm > 15)
pm = 15;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
cs->hw_mode |= CSMODE_PM(pm);
spi: fsl-espi: don't write ESPI_SPMODE register if the mode doesn't change There's no need to bother the chip if the mode doesn't change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-05 04:01:12 +08:00
/* don't write the mode register if the mode doesn't change */
if (cs->hw_mode != hw_mode_old)
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODEx(spi->chip_select),
cs->hw_mode);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
u32 mask, spcom;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
int ret;
spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsigned Now that we introduced element tx_len in struct mpc8xxx_spi let's rename element len to rx_len as it actually is the number of bytes to receive. In addition make it unsigned. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:26:08 +08:00
mpc8xxx_spi->rx_len = t->len;
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
mpc8xxx_spi->tx_len = t->len;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
mpc8xxx_spi->tx = t->tx_buf;
mpc8xxx_spi->rx = t->rx_buf;
tree-wide: use reinit_completion instead of INIT_COMPLETION Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 06:32:02 +08:00
reinit_completion(&mpc8xxx_spi->done);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* Set SPCOM[CS] and SPCOM[TRANLEN] field */
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
spcom = SPCOM_CS(spi->chip_select);
spcom |= SPCOM_TRANLEN(t->len - 1);
/* configure RXSKIP mode */
if (mpc8xxx_spi->rxskip) {
spcom |= SPCOM_RXSKIP(mpc8xxx_spi->rxskip);
mpc8xxx_spi->tx_len = mpc8xxx_spi->rxskip;
mpc8xxx_spi->rx_len = t->len - mpc8xxx_spi->rxskip;
mpc8xxx_spi->rx = t->rx_buf + mpc8xxx_spi->rxskip;
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
if (t->rx_nbits == SPI_NBITS_DUAL)
spcom |= SPCOM_DO;
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
}
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPCOM, spcom);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: make better use of the RX FIFO So far an interrupt is triggered whenever there's at least one byte in the RX FIFO. This results in a unnecessarily high number of interrupts. Change this to generate an interrupt if - RX FIFO is half full (except if all bytes to read fit into the RX FIFO anyway) - end of transfer has been reached This way the number of interrupts can be significantly reduced. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:27:56 +08:00
/* enable interrupts */
mask = SPIM_DON;
if (mpc8xxx_spi->rx_len > FSL_ESPI_FIFO_SIZE)
mask |= SPIM_RXT;
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, mask);
spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufs fsl_espi_bufs and fsl_espi_cpu_bufs are very small that we can merge them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:01 +08:00
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
/* Prevent filling the fifo from getting interrupted */
spin_lock_irq(&mpc8xxx_spi->lock);
fsl_espi_fill_tx_fifo(mpc8xxx_spi, 0);
spin_unlock_irq(&mpc8xxx_spi->lock);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi/fsl-espi: Don't wait transaction completion forever Because the eSPI driver uses wait_for_completion(), any stuck-able phenomenon at half-way transaction progress made worker task hang up. This phenomenon is perhaps caused by eSPI device errata which seems not to be published from vendor site yet. Anyway, we fix hang task by using fixed 2 seconds timeout that is our preferred value for eSPI maximum transaction size. It seems to be better that eSPI driver can detect this stuck and report error (EMSGSIZE) to the upper device driver because the upper device driver can decide to retry or recover. Signed-off-by: Nobuteru Hayashi <hayashi.nbb@ncos.nec.co.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-18 19:35:21 +08:00
/* Won't hang up forever, SPI bus sometimes got lost interrupts... */
ret = wait_for_completion_timeout(&mpc8xxx_spi->done, 2 * HZ);
if (ret == 0)
dev_err(mpc8xxx_spi->dev,
spi: fsl-espi: extend and improve transfer error handling Extend and improve transfer error handling - in case of timeout report also number of remaining rx bytes - in case of timeout return ETIMEDOUT instead of EMSGSIZE - add sanity checks after all bytes have been sent / read: - check that HW has flag SPIE_DON set - check that RX / TX FIFO are empty Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:28:02 +08:00
"Transaction hanging up (left %u tx bytes, %u rx bytes)\n",
mpc8xxx_spi->tx_len, mpc8xxx_spi->rx_len);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* disable rx ints */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, 0);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: extend and improve transfer error handling Extend and improve transfer error handling - in case of timeout report also number of remaining rx bytes - in case of timeout return ETIMEDOUT instead of EMSGSIZE - add sanity checks after all bytes have been sent / read: - check that HW has flag SPIE_DON set - check that RX / TX FIFO are empty Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:28:02 +08:00
return ret == 0 ? -ETIMEDOUT : 0;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans Merge both functions to reduce source code size and improve readability. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:51 +08:00
static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
{
spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans Merge both functions to reduce source code size and improve readability. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:51 +08:00
struct mpc8xxx_spi *mspi = spi_master_get_devdata(m->spi->master);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
struct spi_device *spi = m->spi;
spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans Merge both functions to reduce source code size and improve readability. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:51 +08:00
int ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add support for ESPI RXSKIP mode This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:01 +08:00
mspi->rxskip = fsl_espi_check_rxskip_mode(m);
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
if (trans->rx_nbits == SPI_NBITS_DUAL && !mspi->rxskip) {
dev_err(mspi->dev, "Dual output mode requires RXSKIP mode!\n");
return -EINVAL;
}
spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans Merge both functions to reduce source code size and improve readability. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:51 +08:00
fsl_espi_copy_to_buf(m, mspi);
spi: fsl-espi: eliminate struct fsl_espi_transfer The remaining elements of struct fsl_espi_transfer are part of struct spi_transfer anyway. So we can get rid of struct fsl_espi_transfer and use a struct spi_transfer only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:52:06 +08:00
fsl_espi_setup_transfer(spi, trans);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: improve message length handling Move checking for a zero-length message up in the call chain and use m->frame_length instead of re-calculating the overall length of all transfers in the message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:35 +08:00
ret = fsl_espi_bufs(spi, trans);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: eliminate struct fsl_espi_transfer The remaining elements of struct fsl_espi_transfer are part of struct spi_transfer anyway. So we can get rid of struct fsl_espi_transfer and use a struct spi_transfer only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:52:06 +08:00
if (trans->delay_usecs)
udelay(trans->delay_usecs);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: factor out handling of read data Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:18 +08:00
if (!ret)
fsl_espi_copy_from_buf(m, mspi);
spi: fsl-espi: remove element status from struct fsl_espi_transfer Use the return values of the functions in the call chain to transport status information instead of using an element in struct fsl_espi_transfer for this. This is more in line with the general approach how to handle status information and is one step further to eventually get rid of struct fsl_espi_transfer completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:51:10 +08:00
return ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-(e)spi: migrate to generic master queueing Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:17 +08:00
static int fsl_espi_do_one_msg(struct spi_master *master,
struct spi_message *m)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
{
spi: fsl-espi: centralize populating struct spi_transfer Better structure the code by population all elements of struct spi_transfer in one place. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:00 +08:00
struct mpc8xxx_spi *mspi = spi_master_get_devdata(m->spi->master);
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
unsigned int delay_usecs = 0, rx_nbits = 0;
spi: fsl-espi: eliminate struct fsl_espi_transfer The remaining elements of struct fsl_espi_transfer are part of struct spi_transfer anyway. So we can get rid of struct fsl_espi_transfer and use a struct spi_transfer only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:52:06 +08:00
struct spi_transfer *t, trans = {};
spi: fsl-espi: remove element status from struct fsl_espi_transfer Use the return values of the functions in the call chain to transport status information instead of using an element in struct fsl_espi_transfer for this. This is more in line with the general approach how to handle status information and is one step further to eventually get rid of struct fsl_espi_transfer completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:51:10 +08:00
int ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: factor out initial message checking Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:38 +08:00
ret = fsl_espi_check_message(m);
if (ret)
goto out;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
list_for_each_entry(t, &m->transfers, transfer_list) {
spi: fsl-espi: centralize populating struct spi_transfer Better structure the code by population all elements of struct spi_transfer in one place. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:00 +08:00
if (t->delay_usecs > delay_usecs)
delay_usecs = t->delay_usecs;
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
if (t->rx_nbits > rx_nbits)
rx_nbits = t->rx_nbits;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-espi: centralize populating struct spi_transfer Better structure the code by population all elements of struct spi_transfer in one place. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:00 +08:00
t = list_first_entry(&m->transfers, struct spi_transfer,
transfer_list);
spi: fsl-espi: improve message length handling Move checking for a zero-length message up in the call chain and use m->frame_length instead of re-calculating the overall length of all transfers in the message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:35 +08:00
trans.len = m->frame_length;
spi: fsl-espi: centralize populating struct spi_transfer Better structure the code by population all elements of struct spi_transfer in one place. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:00 +08:00
trans.speed_hz = t->speed_hz;
trans.bits_per_word = t->bits_per_word;
trans.delay_usecs = delay_usecs;
trans.tx_buf = mspi->local_buf;
trans.rx_buf = mspi->local_buf;
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
trans.rx_nbits = rx_nbits;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: improve message length handling Move checking for a zero-length message up in the call chain and use m->frame_length instead of re-calculating the overall length of all transfers in the message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:54:35 +08:00
if (trans.len)
ret = fsl_espi_trans(m, &trans);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: eliminate struct fsl_espi_transfer The remaining elements of struct fsl_espi_transfer are part of struct spi_transfer anyway. So we can get rid of struct fsl_espi_transfer and use a struct spi_transfer only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:52:06 +08:00
m->actual_length = ret ? 0 : trans.len;
spi: fsl-espi: factor out initial message checking Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:53:38 +08:00
out:
spi: fsl-espi: fix status handling in fsl_espi_do_one_msg If an error occurred during message handling return this error instead of always returning 0 and align the code with the generic implementation in spi_transfer_one_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:51:29 +08:00
if (m->status == -EINPROGRESS)
m->status = ret;
spi: fsl-(e)spi: migrate to generic master queueing Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:17 +08:00
spi_finalize_current_message(master);
spi: fsl-espi: fix status handling in fsl_espi_do_one_msg If an error occurred during message handling return this error instead of always returning 0 and align the code with the generic implementation in spi_transfer_one_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:51:29 +08:00
return ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
static int fsl_espi_setup(struct spi_device *spi)
{
struct mpc8xxx_spi *mpc8xxx_spi;
u32 loop_mode;
spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31 12:44:09 +08:00
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
if (!spi->max_speed_hz)
return -EINVAL;
if (!cs) {
spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31 12:44:09 +08:00
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
if (!cs)
return -ENOMEM;
spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31 12:44:09 +08:00
spi_set_ctldata(spi, cs);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
mpc8xxx_spi = spi_master_get_devdata(spi->master);
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
pm_runtime_get_sync(mpc8xxx_spi->dev);
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
cs->hw_mode = fsl_espi_read_reg(mpc8xxx_spi,
ESPI_SPMODEx(spi->chip_select));
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* mask out bits we are going to set */
cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH
| CSMODE_REV);
if (spi->mode & SPI_CPHA)
cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK;
if (spi->mode & SPI_CPOL)
cs->hw_mode |= CSMODE_CI_INACTIVEHIGH;
if (!(spi->mode & SPI_LSB_FIRST))
cs->hw_mode |= CSMODE_REV;
/* Handle the loop mode */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
loop_mode = fsl_espi_read_reg(mpc8xxx_spi, ESPI_SPMODE);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
loop_mode &= ~SPMODE_LOOP;
if (spi->mode & SPI_LOOP)
loop_mode |= SPMODE_LOOP;
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, loop_mode);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: change return type of fsl_espi_setup_transfer to void fsl_espi_setup_transfer always returns 0, so change the return type to void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-25 12:44:42 +08:00
fsl_espi_setup_transfer(spi, NULL);
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
pm_runtime_mark_last_busy(mpc8xxx_spi->dev);
pm_runtime_put_autosuspend(mpc8xxx_spi->dev);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
return 0;
}
spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31 12:44:09 +08:00
static void fsl_espi_cleanup(struct spi_device *spi)
{
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
kfree(cs);
spi_set_ctldata(spi, NULL);
}
spi: fsl-espi: add missing static declaration to fsl_espi_cpu_irq Add missing static declaration to fsl_espi_cpu_irq. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-25 12:45:16 +08:00
static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
{
spi: fsl-espi: fix and improve reading from RX FIFO Currently the driver polls in the ISR for enough bytes in the RX FIFO. An ISR should never do this. Change it to read as much as possible whenever the ISR is called. This also allows to significantly simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:27:35 +08:00
if (mspi->rx_len)
fsl_espi_read_rx_fifo(mspi, events);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
if (mspi->tx_len)
fsl_espi_fill_tx_fifo(mspi, events);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: extend and improve transfer error handling Extend and improve transfer error handling - in case of timeout report also number of remaining rx bytes - in case of timeout return ETIMEDOUT instead of EMSGSIZE - add sanity checks after all bytes have been sent / read: - check that HW has flag SPIE_DON set - check that RX / TX FIFO are empty Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:28:02 +08:00
if (mspi->tx_len || mspi->rx_len)
return;
/* we're done, but check for errors before returning */
events = fsl_espi_read_reg(mspi, ESPI_SPIE);
if (!(events & SPIE_DON))
dev_err(mspi->dev,
"Transfer done but SPIE_DON isn't set!\n");
if (SPIE_RXCNT(events) || SPIE_TXCNT(events) != FSL_ESPI_FIFO_SIZE)
dev_err(mspi->dev, "Transfer done but rx/tx fifo's aren't empty!\n");
complete(&mspi->done);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
{
struct mpc8xxx_spi *mspi = context_data;
u32 events;
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
spin_lock(&mspi->lock);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* Get interrupt events(tx/rx) */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
events = fsl_espi_read_reg(mspi, ESPI_SPIE);
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
if (!events) {
spi: fsl-espi: small fix to error path in fsl_espi_irq spin_lock is used to obtain the spinlock, so spin_unlock has to be used here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 16:53:19 +08:00
spin_unlock(&mspi->lock);
spi: fsl-espi: improve and simplify interrupt handler Simplify the interrupt handler a little. In addition don't call fsl_espi_cpu_irq() if no event bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:15:57 +08:00
return IRQ_NONE;
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
}
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events);
fsl_espi_cpu_irq(mspi, events);
spi: fsl-espi: improve and simplify interrupt handler Simplify the interrupt handler a little. In addition don't call fsl_espi_cpu_irq() if no event bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:15:57 +08:00
/* Clear the events */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mspi, ESPI_SPIE, events);
spi: fsl-espi: improve and simplify interrupt handler Simplify the interrupt handler a little. In addition don't call fsl_espi_cpu_irq() if no event bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:15:57 +08:00
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
spin_unlock(&mspi->lock);
spi: fsl-espi: improve and simplify interrupt handler Simplify the interrupt handler a little. In addition don't call fsl_espi_cpu_irq() if no event bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:15:57 +08:00
return IRQ_HANDLED;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
#ifdef CONFIG_PM
static int fsl_espi_runtime_suspend(struct device *dev)
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
{
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
struct spi_master *master = dev_get_drvdata(dev);
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
u32 regval;
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
regval = fsl_espi_read_reg(mpc8xxx_spi, ESPI_SPMODE);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
regval &= ~SPMODE_ENABLE;
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, regval);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
return 0;
}
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
static int fsl_espi_runtime_resume(struct device *dev)
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
{
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
struct spi_master *master = dev_get_drvdata(dev);
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
u32 regval;
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
regval = fsl_espi_read_reg(mpc8xxx_spi, ESPI_SPMODE);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
regval |= SPMODE_ENABLE;
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, regval);
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
return 0;
}
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
#endif
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:19 +08:00
spi: fsl-espi: eliminate spi nor flash read loop The fsl-espi driver contains a read loop that implicitely assumes that the device to read from is a m25p80 SPI NOR flash (bytes 2 - 4 of the first write transfer are interpreted as 3 byte flash address). Now that we have such a read loop in the spi-nor driver and are able to correctly indicate the message size limit of the controller, the read loop can be removed from the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18 03:11:01 +08:00
static size_t fsl_espi_max_message_size(struct spi_device *spi)
spi: fsl-espi: expose maximum transfer size limit The fsl-espi hardware can trasfer at most 64K data so report teh limitation. Based on patch by Heiner Kallweit <hkallweit1@gmail.com> CC: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02 18:38:21 +08:00
{
return SPCOM_TRANLEN_MAX;
}
spi: fsl-espi: improve return value handling in fsl_espi_probe The return value of fsl_espi_probe (currently struct spi_master *) is just used for checking whether an error occurred. Change the return value type to int and simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:31 +08:00
static int fsl_espi_probe(struct device *dev, struct resource *mem,
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
unsigned int irq, unsigned int num_cs)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
{
struct spi_master *master;
struct mpc8xxx_spi *mpc8xxx_spi;
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
struct device_node *nc;
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
u32 regval, csmode, cs, prop;
int ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi));
spi: fsl-espi: improve return value handling in fsl_espi_probe The return value of fsl_espi_probe (currently struct spi_master *) is just used for checking whether an error occurred. Change the return value type to int and simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:31 +08:00
if (!master)
return -ENOMEM;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
dev_set_drvdata(dev, master);
spi: fsl-(e)spi: migrate to generic master queueing Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:17 +08:00
mpc8xxx_spi_probe(dev, mem, irq);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add support for dual output read mode This patch adds support for dual output read mode. It was successfully tested on a P1014-based device with S25FL128S SPINOR flash. With 50MHz SPI clock the read rate is 11MByte/s. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10 05:58:34 +08:00
master->mode_bits |= SPI_RX_DUAL;
spi: convert drivers to use bits_per_word_mask Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-22 10:36:35 +08:00
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
master->setup = fsl_espi_setup;
spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-08-31 12:44:09 +08:00
master->cleanup = fsl_espi_cleanup;
spi: fsl-(e)spi: migrate to generic master queueing Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 14:56:17 +08:00
master->transfer_one_message = fsl_espi_do_one_msg;
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
master->auto_runtime_pm = true;
spi: fsl-espi: eliminate spi nor flash read loop The fsl-espi driver contains a read loop that implicitely assumes that the device to read from is a m25p80 SPI NOR flash (bytes 2 - 4 of the first write transfer are interpreted as 3 byte flash address). Now that we have such a read loop in the spi-nor driver and are able to correctly indicate the message size limit of the controller, the read loop can be removed from the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18 03:11:01 +08:00
master->max_message_size = fsl_espi_max_message_size;
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
master->num_chipselect = num_cs;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
mpc8xxx_spi = spi_master_get_devdata(master);
spi: fsl-espi: fix and improve writing to TX FIFO This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:25:58 +08:00
spin_lock_init(&mpc8xxx_spi->lock);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: pre-allocate message buffer Currently the driver allocates a 64kb buffer for each single message. On systems with little and fragmented memory this can result in memory allocation errors. Solve this by pre-allocating a buffer. This patch was developed in OpenWRT long ago, however it never made it upstream. I slightly modified the original patch to re-initialize the buffer at the beginning of each transfer. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-08 04:50:22 +08:00
mpc8xxx_spi->local_buf =
devm_kmalloc(dev, SPCOM_TRANLEN_MAX, GFP_KERNEL);
if (!mpc8xxx_spi->local_buf) {
ret = -ENOMEM;
goto err_probe;
}
spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:50 +08:00
mpc8xxx_spi->reg_base = devm_ioremap_resource(dev, mem);
spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resource devm_ioremap_resource() returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30 18:35:51 +08:00
if (IS_ERR(mpc8xxx_spi->reg_base)) {
ret = PTR_ERR(mpc8xxx_spi->reg_base);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
goto err_probe;
}
/* Register for SPI Interrupt */
spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:50 +08:00
ret = devm_request_irq(dev, mpc8xxx_spi->irq, fsl_espi_irq,
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
0, "fsl_espi", mpc8xxx_spi);
if (ret)
spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:50 +08:00
goto err_probe;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
spi: fsl-espi: improve check for SPI_QE_CPU_MODE SPI_QE_CPU_MODE doesn't exist for ESPI and is set by of_mpc8xxx_spi_probe based on DT property "mode". This property is not defined for ESPI, see Documentation/devicetree/bindings/spi/fsl-spi.txt. So print an error message and bail out if SPI_QE_CPU_MODE is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 03:24:01 +08:00
dev_err(dev, "SPI_QE_CPU_MODE is not supported on ESPI!\n");
ret = -EINVAL;
goto err_probe;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
/* SPI controller initializations */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPCOM, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIE, 0xffffffff);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* Init eSPI CS mode register */
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
for_each_available_child_of_node(master->dev.of_node, nc) {
/* get chip select */
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
ret = of_property_read_u32(nc, "reg", &cs);
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
if (ret || cs >= num_cs)
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
continue;
csmode = CSMODE_INIT_VAL;
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
/* check if CSBEF is set in device tree */
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
ret = of_property_read_u32(nc, "fsl,csbef", &prop);
if (!ret) {
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
csmode &= ~(CSMODE_BEF(0xf));
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
csmode |= CSMODE_BEF(prop);
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
}
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
/* check if CSAFT is set in device tree */
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
ret = of_property_read_u32(nc, "fsl,csaft", &prop);
if (!ret) {
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
csmode &= ~(CSMODE_AFT(0xf));
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
csmode |= CSMODE_AFT(prop);
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
}
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODEx(cs), csmode);
dev_info(dev, "cs=%u, init_csmode=0x%x\n", cs, csmode);
spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT Make FSL eSPI CSnBEF and CSnAFT fields in ESPI_SPMODEn registers (n=0,1,2,3) configurable through device tree. CSnBEF is the chip select setup time. It's the delay in bits from the activation of chip select pin to the first clock for data frame. CSnAFT is the chip select hold time. It's the delay in bits from the last clock for data frame to the deactivation of chip select pin. The FSL eSPI driver hardcodes CSnBEF and CSnAFT to 0. Need to set them to a different value for some device. Signed-off-by: Jane Wan <Jane.Wan@gainspeed.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-17 04:09:39 +08:00
}
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
/* Enable SPI interface */
spi: fsl-espi: remove usage of pdata->initial_spmode Remove pdata->initial_spmode as it is nowhere set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:01 +08:00
regval = SPMODE_INIT_VAL | SPMODE_ENABLE;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, regval);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:50 +08:00
ret = devm_spi_register_master(dev, master);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
if (ret < 0)
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
goto err_pm;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
dev_info(dev, "at 0x%p (irq = %d)\n", mpc8xxx_spi->reg_base,
mpc8xxx_spi->irq);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
spi: fsl-espi: improve return value handling in fsl_espi_probe The return value of fsl_espi_probe (currently struct spi_master *) is just used for checking whether an error occurred. Change the return value type to int and simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:31 +08:00
return 0;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
err_pm:
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
err_probe:
spi_master_put(master);
spi: fsl-espi: improve return value handling in fsl_espi_probe The return value of fsl_espi_probe (currently struct spi_master *) is just used for checking whether an error occurred. Change the return value type to int and simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:31 +08:00
return ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
static int of_fsl_espi_get_chipselects(struct device *dev)
{
struct device_node *np = dev->of_node;
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
u32 num_cs;
int ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: replace of_get_property with of_property_read_u32 of_property_read_u32 is better here than generic of_get_property: - implicit endianness conversion if needed - implicit checking of size of property Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-02 03:07:52 +08:00
ret = of_property_read_u32(np, "fsl,espi-num-chipselects", &num_cs);
if (ret) {
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
dev_err(dev, "No 'fsl,espi-num-chipselects' property\n");
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
return 0;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
return num_cs;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: Remove HOTPLUG section attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-08 00:57:14 +08:00
static int of_fsl_espi_probe(struct platform_device *ofdev)
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
{
struct device *dev = &ofdev->dev;
struct device_node *np = ofdev->dev.of_node;
struct resource mem;
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
unsigned int irq, num_cs;
spi: fsl-espi: simplify of_fsl_espi_probe Simplify of_fsl_espi_probe. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:00 +08:00
int ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
dt/spi: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/spi. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:02:43 +08:00
ret = of_mpc8xxx_spi_probe(ofdev);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
if (ret)
return ret;
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
num_cs = of_fsl_espi_get_chipselects(dev);
if (!num_cs)
return -EINVAL;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
ret = of_address_to_resource(np, 0, &mem);
if (ret)
spi: fsl-espi: simplify of_fsl_espi_probe Simplify of_fsl_espi_probe. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:00 +08:00
return ret;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
of/irq: Use irq_of_parse_and_map() Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-09-18 21:24:44 +08:00
irq = irq_of_parse_and_map(np, 0);
spi: fsl-espi: simplify of_fsl_espi_probe Simplify of_fsl_espi_probe. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-17 21:43:00 +08:00
if (!irq)
return -EINVAL;
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
return fsl_espi_probe(dev, &mem, irq, num_cs);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
}
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
static int of_fsl_espi_remove(struct platform_device *dev)
{
pm_runtime_disable(&dev->dev);
return 0;
}
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
#ifdef CONFIG_PM_SLEEP
static int of_fsl_espi_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
int ret;
ret = spi_master_suspend(master);
if (ret) {
dev_warn(dev, "cannot suspend master\n");
return ret;
}
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
ret = pm_runtime_force_suspend(dev);
if (ret < 0)
return ret;
return 0;
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
}
static int of_fsl_espi_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct mpc8xxx_spi *mpc8xxx_spi;
u32 regval;
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
int i, ret;
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
mpc8xxx_spi = spi_master_get_devdata(master);
/* SPI controller initializations */
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPCOM, 0);
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIE, 0xffffffff);
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
/* Init eSPI CS mode register */
spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data Use master->num_chipselect directly instead of pdata->max_chipselect. In this context let of_fsl_espi_get_chipselects return max_chipselect. This change allows us to get rid of struct fsl_spi_platform_data completely in the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:39 +08:00
for (i = 0; i < master->num_chipselect; i++)
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODEx(i),
CSMODE_INIT_VAL);
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
/* Enable SPI interface */
spi: fsl-espi: remove usage of pdata->initial_spmode Remove pdata->initial_spmode as it is nowhere set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13 21:36:01 +08:00
regval = SPMODE_INIT_VAL | SPMODE_ENABLE;
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
spi: fsl-espi: align register access with other drivers Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 05:16:02 +08:00
fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPMODE, regval);
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
ret = pm_runtime_force_resume(dev);
if (ret < 0)
return ret;
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
return spi_master_resume(master);
}
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops espi_pm = {
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
SET_RUNTIME_PM_OPS(fsl_espi_runtime_suspend,
fsl_espi_runtime_resume, NULL)
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
SET_SYSTEM_SLEEP_PM_OPS(of_fsl_espi_suspend, of_fsl_espi_resume)
};
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
static const struct of_device_id of_fsl_espi_match[] = {
{ .compatible = "fsl,mpc8536-espi" },
{}
};
MODULE_DEVICE_TABLE(of, of_fsl_espi_match);
dt/spi: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/spi. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:02:43 +08:00
static struct platform_driver fsl_espi_driver = {
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
.driver = {
.name = "fsl_espi",
.of_match_table = of_fsl_espi_match,
spi/fsl-espi: Add Power Management support for eSPI controller Add PM support for eSPI controller using callback function suspend and resume in .driver.pm of platform_driver. Signed-off-by: Hou Zhiqiang <b48286@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12 12:53:52 +08:00
.pm = &espi_pm,
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
},
.probe = of_fsl_espi_probe,
spi: fsl-espi: add runtime PM Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 03:21:55 +08:00
.remove = of_fsl_espi_remove,
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
};
drivercore: Add helper macro for platform_driver boilerplate For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-06 01:29:49 +08:00
module_platform_driver(fsl_espi_driver);
spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 18:18:32 +08:00
MODULE_AUTHOR("Mingkai Hu");
MODULE_DESCRIPTION("Enhanced Freescale SPI Driver");
MODULE_LICENSE("GPL");