OpenCloudOS-Kernel/net/wireless/reg.c

3348 lines
86 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
cfg80211: relicense reg.c reg.h and genregdb.awk to ISC Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.git Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Dan Carpenter <error27@gmail.com> Acked-by: Mihai Moldovan <ionic@ionic.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tony Vroon <tony@linx.net> Acked-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Pat Erley <pat-lkml@erley.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: John Gordon <john@devicescape.com> Acked-by: Simon Barber <protocolmagic@gmail.com> Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Jiri Benc <jbenc@upir.cz> Acked-by: Bruno Randolf <br1@einfach.org> Acked-by: Scott James Remnant <keybuk@google.com> Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21 04:23:38 +08:00
* Copyright 2008-2011 Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
* Copyright 2013-2014 Intel Mobile Communications GmbH
*
cfg80211: relicense reg.c reg.h and genregdb.awk to ISC Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.git Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Dan Carpenter <error27@gmail.com> Acked-by: Mihai Moldovan <ionic@ionic.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tony Vroon <tony@linx.net> Acked-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Pat Erley <pat-lkml@erley.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: John Gordon <john@devicescape.com> Acked-by: Simon Barber <protocolmagic@gmail.com> Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Jiri Benc <jbenc@upir.cz> Acked-by: Bruno Randolf <br1@einfach.org> Acked-by: Scott James Remnant <keybuk@google.com> Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21 04:23:38 +08:00
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
cfg80211: relicense reg.c reg.h and genregdb.awk to ISC Following the tradition we have had with ath5k, ath9k, CRDA, wireless-regdb I'd like to license this code under the permissive ISC license for the code sharing purposes with other OSes, it'd sure be nice to help the landscape in this area. Although I am %82.89 owner of the regulatory code I have asked every contributor to the regulatory code and have receieved positive Acked-bys from everyone except two deceased entities: o Frans Pop RIP 2010 [0] - Frans Pop <elendil@planet.nl> - Frans Pop <fjp@debian.org> o Nokia RIP February, 11, 2011 [1], [2] - ext-yuri.ershov@nokia.com - kalle.valo@nokia.com Frans Pop's contribution was a simple patch 55f98938, titled, "wireless: remove trailing space in messages" which just add a \n to some printk lines. I'm going to treat these additions as uncopyrightable. As for the contributions made by employees on behalf of Nokia my contact point was Petri Karhula <petri.karhula@nokia.com> but after one month he noted he had not been able to get traction from the legal department on this request, as such it I proceeded by replacing their contributions in previous patches. The end goal is to help a clean rewrite that starts in userspace that is shared under ISC license which currently is taking place with the regulatory simulator [3]. [0] http://lists.debian.org/debian-devel/2011/12/msg00263.html [1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/ [2] http://NokiaPlanB.com [3] git://github.com/mcgrof/regsim.git Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Dan Carpenter <error27@gmail.com> Acked-by: Mihai Moldovan <ionic@ionic.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Tony Vroon <tony@linx.net> Acked-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Pat Erley <pat-lkml@erley.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: John Gordon <john@devicescape.com> Acked-by: Simon Barber <protocolmagic@gmail.com> Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Jiri Benc <jbenc@upir.cz> Acked-by: Bruno Randolf <br1@einfach.org> Acked-by: Scott James Remnant <keybuk@google.com> Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21 04:23:38 +08:00
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/**
* DOC: Wireless regulatory infrastructure
*
* The usual implementation is for a driver to read a device EEPROM to
* determine which regulatory domain it should be operating under, then
* looking up the allowable channels in a driver-local table and finally
* registering those channels in the wiphy structure.
*
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
* Another set of compliance enforcement is for drivers to use their
* own compliance limits which can be stored on the EEPROM. The host
* driver or firmware may ensure these are used.
*
* In addition to all this we provide an extra layer of regulatory
* conformance. For drivers which do not have any regulatory
* information CRDA provides the complete regulatory solution.
* For others it provides a community effort on further restrictions
* to enhance compliance.
*
* Note: When number of rules --> infinity we will not be able to
* index on alpha2 any more, instead we'll probably have to
* rely on some SHA1 checksum of the regdomain for example.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/export.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
#include <linux/list.h>
#include <linux/ctype.h>
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/moduleparam.h>
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
#include <net/cfg80211.h>
#include "core.h"
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
#include "reg.h"
#include "rdev-ops.h"
#include "regdb.h"
#include "nl80211.h"
/*
* Grace period we give before making sure all current interfaces reside on
* channels allowed by the current regulatory domain.
*/
#define REG_ENFORCE_GRACE_MS 60000
/**
* enum reg_request_treatment - regulatory request treatment
*
* @REG_REQ_OK: continue processing the regulatory request
* @REG_REQ_IGNORE: ignore the regulatory request
* @REG_REQ_INTERSECT: the regulatory domain resulting from this request should
* be intersected with the current one.
* @REG_REQ_ALREADY_SET: the regulatory request will not change the current
* regulatory settings, and no further processing is required.
*/
enum reg_request_treatment {
REG_REQ_OK,
REG_REQ_IGNORE,
REG_REQ_INTERSECT,
REG_REQ_ALREADY_SET,
};
static struct regulatory_request core_request_world = {
.initiator = NL80211_REGDOM_SET_BY_CORE,
.alpha2[0] = '0',
.alpha2[1] = '0',
.intersect = false,
.processed = true,
.country_ie_env = ENVIRON_ANY,
};
/*
* Receipt of information from last regulatory request,
* protected by RTNL (and can be accessed with RCU protection)
*/
static struct regulatory_request __rcu *last_request =
(void __force __rcu *)&core_request_world;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/* To trigger userspace events */
static struct platform_device *reg_pdev;
/*
* Central wireless core regulatory domains, we only need two,
* the current one and a world regulatory domain in case we have no
* information to give us an alpha2.
* (protected by RTNL, can be read under RCU)
*/
const struct ieee80211_regdomain __rcu *cfg80211_regdomain;
/*
* Number of devices that registered to the core
* that support cellular base station regulatory hints
* (protected by RTNL)
*/
static int reg_num_devs_support_basehint;
/*
* State variable indicating if the platform on which the devices
* are attached is operating in an indoor environment. The state variable
* is relevant for all registered devices.
*/
static bool reg_is_indoor;
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
static spinlock_t reg_indoor_lock;
/* Used to track the userspace process controlling the indoor setting */
static u32 reg_is_indoor_portid;
static void restore_regulatory_settings(bool reset_user);
static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
{
return rtnl_dereference(cfg80211_regdomain);
}
const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy)
{
return rtnl_dereference(wiphy->regd);
}
static const char *reg_dfs_region_str(enum nl80211_dfs_regions dfs_region)
{
switch (dfs_region) {
case NL80211_DFS_UNSET:
return "unset";
case NL80211_DFS_FCC:
return "FCC";
case NL80211_DFS_ETSI:
return "ETSI";
case NL80211_DFS_JP:
return "JP";
}
return "Unknown";
}
enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy)
{
const struct ieee80211_regdomain *regd = NULL;
const struct ieee80211_regdomain *wiphy_regd = NULL;
regd = get_cfg80211_regdom();
if (!wiphy)
goto out;
wiphy_regd = get_wiphy_regdom(wiphy);
if (!wiphy_regd)
goto out;
if (wiphy_regd->dfs_region == regd->dfs_region)
goto out;
pr_debug("%s: device specific dfs_region (%s) disagrees with cfg80211's central dfs_region (%s)\n",
dev_name(&wiphy->dev),
reg_dfs_region_str(wiphy_regd->dfs_region),
reg_dfs_region_str(regd->dfs_region));
out:
return regd->dfs_region;
}
static void rcu_free_regdom(const struct ieee80211_regdomain *r)
{
if (!r)
return;
kfree_rcu((struct ieee80211_regdomain *)r, rcu_head);
}
static struct regulatory_request *get_last_request(void)
{
return rcu_dereference_rtnl(last_request);
}
/* Used to queue up regulatory hints */
static LIST_HEAD(reg_requests_list);
static spinlock_t reg_requests_lock;
/* Used to queue up beacon hints for review */
static LIST_HEAD(reg_pending_beacons);
static spinlock_t reg_pending_beacons_lock;
/* Used to keep track of processed beacon hints */
static LIST_HEAD(reg_beacon_list);
struct reg_beacon {
struct list_head list;
struct ieee80211_channel chan;
};
static void reg_check_chans_work(struct work_struct *work);
static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work);
static void reg_todo(struct work_struct *work);
static DECLARE_WORK(reg_work, reg_todo);
/* We keep a static world regulatory domain in case of the absence of CRDA */
static const struct ieee80211_regdomain world_regdom = {
.n_reg_rules = 8,
.alpha2 = "00",
.reg_rules = {
/* IEEE 802.11b/g, channels 1..11 */
REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
/* IEEE 802.11b/g, channels 12..13. */
REG_RULE(2467-10, 2472+10, 20, 6, 20,
NL80211_RRF_NO_IR | NL80211_RRF_AUTO_BW),
/* IEEE 802.11 channel 14 - Only JP enables
* this and for 802.11b only */
REG_RULE(2484-10, 2484+10, 20, 6, 20,
NL80211_RRF_NO_IR |
NL80211_RRF_NO_OFDM),
/* IEEE 802.11a, channel 36..48 */
REG_RULE(5180-10, 5240+10, 80, 6, 20,
NL80211_RRF_NO_IR |
NL80211_RRF_AUTO_BW),
/* IEEE 802.11a, channel 52..64 - DFS required */
REG_RULE(5260-10, 5320+10, 80, 6, 20,
NL80211_RRF_NO_IR |
NL80211_RRF_AUTO_BW |
NL80211_RRF_DFS),
/* IEEE 802.11a, channel 100..144 - DFS required */
REG_RULE(5500-10, 5720+10, 160, 6, 20,
NL80211_RRF_NO_IR |
NL80211_RRF_DFS),
/* IEEE 802.11a, channel 149..165 */
REG_RULE(5745-10, 5825+10, 80, 6, 20,
NL80211_RRF_NO_IR),
/* IEEE 802.11ad (60GHz), channels 1..3 */
REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0),
}
};
/* protected by RTNL */
static const struct ieee80211_regdomain *cfg80211_world_regdom =
&world_regdom;
static char *ieee80211_regdom = "00";
static char user_alpha2[2];
module_param(ieee80211_regdom, charp, 0444);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
static void reg_free_request(struct regulatory_request *request)
{
if (request == &core_request_world)
return;
if (request != get_last_request())
kfree(request);
}
static void reg_free_last_request(void)
{
struct regulatory_request *lr = get_last_request();
if (lr != &core_request_world && lr)
kfree_rcu(lr, rcu_head);
}
static void reg_update_last_request(struct regulatory_request *request)
{
struct regulatory_request *lr;
lr = get_last_request();
if (lr == request)
return;
reg_free_last_request();
rcu_assign_pointer(last_request, request);
}
static void reset_regdomains(bool full_reset,
const struct ieee80211_regdomain *new_regdom)
{
const struct ieee80211_regdomain *r;
ASSERT_RTNL();
r = get_cfg80211_regdom();
/* avoid freeing static information or freeing something twice */
if (r == cfg80211_world_regdom)
r = NULL;
if (cfg80211_world_regdom == &world_regdom)
cfg80211_world_regdom = NULL;
if (r == &world_regdom)
r = NULL;
rcu_free_regdom(r);
rcu_free_regdom(cfg80211_world_regdom);
cfg80211_world_regdom = &world_regdom;
rcu_assign_pointer(cfg80211_regdomain, new_regdom);
if (!full_reset)
return;
reg_update_last_request(&core_request_world);
}
/*
* Dynamic world regulatory domain requested by the wireless
* core upon initialization
*/
static void update_world_regdomain(const struct ieee80211_regdomain *rd)
{
struct regulatory_request *lr;
lr = get_last_request();
WARN_ON(!lr);
reset_regdomains(false, rd);
cfg80211_world_regdom = rd;
}
bool is_world_regdom(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
if (!alpha2)
return false;
return alpha2[0] == '0' && alpha2[1] == '0';
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static bool is_alpha2_set(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
if (!alpha2)
return false;
return alpha2[0] && alpha2[1];
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static bool is_unknown_alpha2(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
if (!alpha2)
return false;
/*
* Special case where regulatory domain was built by driver
* but a specific alpha2 cannot be determined
*/
return alpha2[0] == '9' && alpha2[1] == '9';
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static bool is_intersected_alpha2(const char *alpha2)
{
if (!alpha2)
return false;
/*
* Special case where regulatory domain is the
* result of an intersection between two regulatory domain
* structures
*/
return alpha2[0] == '9' && alpha2[1] == '8';
}
static bool is_an_alpha2(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
if (!alpha2)
return false;
return isalpha(alpha2[0]) && isalpha(alpha2[1]);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
if (!alpha2_x || !alpha2_y)
return false;
return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1];
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static bool regdom_changes(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
const struct ieee80211_regdomain *r = get_cfg80211_regdom();
if (!r)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return true;
return !alpha2_equal(r->alpha2, alpha2);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
/*
* The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets
* you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER
* has ever been issued.
*/
static bool is_user_regdom_saved(void)
{
if (user_alpha2[0] == '9' && user_alpha2[1] == '7')
return false;
/* This would indicate a mistake on the design */
if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2),
"Unexpected user alpha2: %c%c\n",
user_alpha2[0], user_alpha2[1]))
return false;
return true;
}
static const struct ieee80211_regdomain *
reg_copy_regd(const struct ieee80211_regdomain *src_regd)
{
struct ieee80211_regdomain *regd;
int size_of_regd;
unsigned int i;
size_of_regd =
sizeof(struct ieee80211_regdomain) +
src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule);
regd = kzalloc(size_of_regd, GFP_KERNEL);
if (!regd)
return ERR_PTR(-ENOMEM);
memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain));
for (i = 0; i < src_regd->n_reg_rules; i++)
memcpy(&regd->reg_rules[i], &src_regd->reg_rules[i],
sizeof(struct ieee80211_reg_rule));
return regd;
}
#ifdef CONFIG_CFG80211_INTERNAL_REGDB
struct reg_regdb_apply_request {
struct list_head list;
const struct ieee80211_regdomain *regdom;
};
static LIST_HEAD(reg_regdb_apply_list);
static DEFINE_MUTEX(reg_regdb_apply_mutex);
static void reg_regdb_apply(struct work_struct *work)
{
struct reg_regdb_apply_request *request;
cfg80211: fix possible circular lock on reg_regdb_search() When call_crda() is called we kick off a witch hunt search for the same regulatory domain on our internal regulatory database and that work gets kicked off on a workqueue, this is done while the cfg80211_mutex is held. If that workqueue kicks off it will first lock reg_regdb_search_mutex and later cfg80211_mutex but to ensure two CPUs will not contend against cfg80211_mutex the right thing to do is to have the reg_regdb_search() wait until the cfg80211_mutex is let go. The lockdep report is pasted below. cfg80211: Calling CRDA to update world regulatory domain ====================================================== [ INFO: possible circular locking dependency detected ] 3.3.8 #3 Tainted: G O ------------------------------------------------------- kworker/0:1/235 is trying to acquire lock: (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] but task is already holding lock: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (reg_regdb_search_mutex){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211] -> #1 (reg_mutex#2){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211] -> #0 (cfg80211_mutex){+.+...}: [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(reg_regdb_search_mutex); lock(reg_mutex#2); lock(reg_regdb_search_mutex); lock(cfg80211_mutex); *** DEADLOCK *** 3 locks held by kworker/0:1/235: #0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460 #1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460 #2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] stack backtrace: Call Trace: [<80290fd4>] dump_stack+0x8/0x34 [<80291bc4>] print_circular_bug+0x2ac/0x2d8 [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] Reported-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-15 06:36:57 +08:00
rtnl_lock();
mutex_lock(&reg_regdb_apply_mutex);
while (!list_empty(&reg_regdb_apply_list)) {
request = list_first_entry(&reg_regdb_apply_list,
struct reg_regdb_apply_request,
list);
list_del(&request->list);
set_regdom(request->regdom, REGD_SOURCE_INTERNAL_DB);
kfree(request);
}
mutex_unlock(&reg_regdb_apply_mutex);
cfg80211: fix possible circular lock on reg_regdb_search() When call_crda() is called we kick off a witch hunt search for the same regulatory domain on our internal regulatory database and that work gets kicked off on a workqueue, this is done while the cfg80211_mutex is held. If that workqueue kicks off it will first lock reg_regdb_search_mutex and later cfg80211_mutex but to ensure two CPUs will not contend against cfg80211_mutex the right thing to do is to have the reg_regdb_search() wait until the cfg80211_mutex is let go. The lockdep report is pasted below. cfg80211: Calling CRDA to update world regulatory domain ====================================================== [ INFO: possible circular locking dependency detected ] 3.3.8 #3 Tainted: G O ------------------------------------------------------- kworker/0:1/235 is trying to acquire lock: (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] but task is already holding lock: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (reg_regdb_search_mutex){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211] -> #1 (reg_mutex#2){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211] -> #0 (cfg80211_mutex){+.+...}: [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(reg_regdb_search_mutex); lock(reg_mutex#2); lock(reg_regdb_search_mutex); lock(cfg80211_mutex); *** DEADLOCK *** 3 locks held by kworker/0:1/235: #0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460 #1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460 #2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] stack backtrace: Call Trace: [<80290fd4>] dump_stack+0x8/0x34 [<80291bc4>] print_circular_bug+0x2ac/0x2d8 [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] Reported-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-15 06:36:57 +08:00
rtnl_unlock();
}
static DECLARE_WORK(reg_regdb_work, reg_regdb_apply);
static int reg_query_builtin(const char *alpha2)
{
const struct ieee80211_regdomain *regdom = NULL;
struct reg_regdb_apply_request *request;
unsigned int i;
for (i = 0; i < reg_regdb_size; i++) {
if (alpha2_equal(alpha2, reg_regdb[i]->alpha2)) {
regdom = reg_regdb[i];
break;
}
}
if (!regdom)
return -ENODATA;
request = kzalloc(sizeof(struct reg_regdb_apply_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->regdom = reg_copy_regd(regdom);
if (IS_ERR_OR_NULL(request->regdom)) {
kfree(request);
return -ENOMEM;
}
mutex_lock(&reg_regdb_apply_mutex);
list_add_tail(&request->list, &reg_regdb_apply_list);
mutex_unlock(&reg_regdb_apply_mutex);
schedule_work(&reg_regdb_work);
return 0;
}
cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDB It has happened twice now where elaborate troubleshooting has undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0] has been set but yet net/wireless/db.txt was not updated. Despite the documentation on this it seems system integrators could use some more help with this, so throw out a kernel warning at boot time when their database is empty. This does mean that the error-prone system integrator won't likely realize the issue until they boot the machine but -- it does not seem to make sense to enable a build bug breaking random build testing. [0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Youngsin Lee <youngsin@qualcomm.com> Cc: Raja Mani <rmani@qca.qualcomm.com> Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com> Cc: Vipin Mehta <vipimeht@qca.qualcomm.com> Cc: yahuan@qca.qualcomm.com Cc: jjan@qca.qualcomm.com Cc: vthiagar@qca.qualcomm.com Cc: henrykim@qualcomm.com Cc: jouni@qca.qualcomm.com Cc: athiruve@qca.qualcomm.com Cc: cjkim@qualcomm.com Cc: philipk@qca.qualcomm.com Cc: sunnykim@qualcomm.com Cc: sskwak@qualcomm.com Cc: kkim@qualcomm.com Cc: mattbyun@qualcomm.com Cc: ryanlee@qualcomm.com Cc: simbap@qualcomm.com Cc: krislee@qualcomm.com Cc: conner@qualcomm.com Cc: hojinkim@qualcomm.com Cc: honglee@qualcomm.com Cc: johnwkim@qualcomm.com Cc: jinyong@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-23 22:23:31 +08:00
/* Feel free to add any other sanity checks here */
static void reg_regdb_size_check(void)
{
/* We should ideally BUILD_BUG_ON() but then random builds would fail */
WARN_ONCE(!reg_regdb_size, "db.txt is empty, you should update it...");
}
#else
cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDB It has happened twice now where elaborate troubleshooting has undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0] has been set but yet net/wireless/db.txt was not updated. Despite the documentation on this it seems system integrators could use some more help with this, so throw out a kernel warning at boot time when their database is empty. This does mean that the error-prone system integrator won't likely realize the issue until they boot the machine but -- it does not seem to make sense to enable a build bug breaking random build testing. [0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Youngsin Lee <youngsin@qualcomm.com> Cc: Raja Mani <rmani@qca.qualcomm.com> Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com> Cc: Vipin Mehta <vipimeht@qca.qualcomm.com> Cc: yahuan@qca.qualcomm.com Cc: jjan@qca.qualcomm.com Cc: vthiagar@qca.qualcomm.com Cc: henrykim@qualcomm.com Cc: jouni@qca.qualcomm.com Cc: athiruve@qca.qualcomm.com Cc: cjkim@qualcomm.com Cc: philipk@qca.qualcomm.com Cc: sunnykim@qualcomm.com Cc: sskwak@qualcomm.com Cc: kkim@qualcomm.com Cc: mattbyun@qualcomm.com Cc: ryanlee@qualcomm.com Cc: simbap@qualcomm.com Cc: krislee@qualcomm.com Cc: conner@qualcomm.com Cc: hojinkim@qualcomm.com Cc: honglee@qualcomm.com Cc: johnwkim@qualcomm.com Cc: jinyong@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-23 22:23:31 +08:00
static inline void reg_regdb_size_check(void) {}
static inline int reg_query_builtin(const char *alpha2)
{
return -ENODATA;
}
#endif /* CONFIG_CFG80211_INTERNAL_REGDB */
#ifdef CONFIG_CFG80211_CRDA_SUPPORT
/* Max number of consecutive attempts to communicate with CRDA */
#define REG_MAX_CRDA_TIMEOUTS 10
static u32 reg_crda_timeouts;
static void crda_timeout_work(struct work_struct *work);
static DECLARE_DELAYED_WORK(crda_timeout, crda_timeout_work);
static void crda_timeout_work(struct work_struct *work)
{
pr_debug("Timeout while waiting for CRDA to reply, restoring regulatory settings\n");
rtnl_lock();
reg_crda_timeouts++;
restore_regulatory_settings(true);
rtnl_unlock();
}
static void cancel_crda_timeout(void)
{
cancel_delayed_work(&crda_timeout);
}
static void cancel_crda_timeout_sync(void)
{
cancel_delayed_work_sync(&crda_timeout);
}
static void reset_crda_timeouts(void)
{
reg_crda_timeouts = 0;
}
/*
* This lets us keep regulatory code which is updated on a regulatory
* basis in userspace.
*/
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
static int call_crda(const char *alpha2)
{
char country[12];
char *env[] = { country, NULL };
int ret;
snprintf(country, sizeof(country), "COUNTRY=%c%c",
alpha2[0], alpha2[1]);
if (reg_crda_timeouts > REG_MAX_CRDA_TIMEOUTS) {
pr_debug("Exceeded CRDA call max attempts. Not calling CRDA\n");
return -EINVAL;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (!is_world_regdom((char *) alpha2))
pr_debug("Calling CRDA for country: %c%c\n",
alpha2[0], alpha2[1]);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
else
pr_debug("Calling CRDA to update world regulatory domain\n");
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
ret = kobject_uevent_env(&reg_pdev->dev.kobj, KOBJ_CHANGE, env);
if (ret)
return ret;
queue_delayed_work(system_power_efficient_wq,
&crda_timeout, msecs_to_jiffies(3142));
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
#else
static inline void cancel_crda_timeout(void) {}
static inline void cancel_crda_timeout_sync(void) {}
static inline void reset_crda_timeouts(void) {}
static inline int call_crda(const char *alpha2)
{
return -ENODATA;
}
#endif /* CONFIG_CFG80211_CRDA_SUPPORT */
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
static bool reg_query_database(struct regulatory_request *request)
{
/* query internal regulatory database (if it exists) */
if (reg_query_builtin(request->alpha2) == 0)
return true;
if (call_crda(request->alpha2) == 0)
return true;
return false;
}
bool reg_is_valid_request(const char *alpha2)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
struct regulatory_request *lr = get_last_request();
if (!lr || lr->processed)
return false;
return alpha2_equal(lr->alpha2, alpha2);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy)
{
struct regulatory_request *lr = get_last_request();
/*
* Follow the driver's regulatory domain, if present, unless a country
* IE has been processed or a user wants to help complaince further
*/
if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
lr->initiator != NL80211_REGDOM_SET_BY_USER &&
wiphy->regd)
return get_wiphy_regdom(wiphy);
return get_cfg80211_regdom();
}
static unsigned int
reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd,
const struct ieee80211_reg_rule *rule)
{
const struct ieee80211_freq_range *freq_range = &rule->freq_range;
const struct ieee80211_freq_range *freq_range_tmp;
const struct ieee80211_reg_rule *tmp;
u32 start_freq, end_freq, idx, no;
for (idx = 0; idx < rd->n_reg_rules; idx++)
if (rule == &rd->reg_rules[idx])
break;
if (idx == rd->n_reg_rules)
return 0;
/* get start_freq */
no = idx;
while (no) {
tmp = &rd->reg_rules[--no];
freq_range_tmp = &tmp->freq_range;
if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz)
break;
freq_range = freq_range_tmp;
}
start_freq = freq_range->start_freq_khz;
/* get end_freq */
freq_range = &rule->freq_range;
no = idx;
while (no < rd->n_reg_rules - 1) {
tmp = &rd->reg_rules[++no];
freq_range_tmp = &tmp->freq_range;
if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz)
break;
freq_range = freq_range_tmp;
}
end_freq = freq_range->end_freq_khz;
return end_freq - start_freq;
}
unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
const struct ieee80211_reg_rule *rule)
{
unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule);
if (rule->flags & NL80211_RRF_NO_160MHZ)
bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80));
if (rule->flags & NL80211_RRF_NO_80MHZ)
bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40));
/*
* HT40+/HT40- limits are handled per-channel. Only limit BW if both
* are not allowed.
*/
if (rule->flags & NL80211_RRF_NO_HT40MINUS &&
rule->flags & NL80211_RRF_NO_HT40PLUS)
bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20));
return bw;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/* Sanity check on a regulatory rule */
static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
{
const struct ieee80211_freq_range *freq_range = &rule->freq_range;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
u32 freq_diff;
if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return false;
if (freq_range->start_freq_khz > freq_range->end_freq_khz)
return false;
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
freq_range->max_bandwidth_khz > freq_diff)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return false;
return true;
}
static bool is_valid_rd(const struct ieee80211_regdomain *rd)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
const struct ieee80211_reg_rule *reg_rule = NULL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
unsigned int i;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (!rd->n_reg_rules)
return false;
if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES))
return false;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
for (i = 0; i < rd->n_reg_rules; i++) {
reg_rule = &rd->reg_rules[i];
if (!is_valid_reg_rule(reg_rule))
return false;
}
return true;
}
/**
* freq_in_rule_band - tells us if a frequency is in a frequency band
* @freq_range: frequency rule we want to query
* @freq_khz: frequency we are inquiring about
*
* This lets us know if a specific frequency rule is or is not relevant to
* a specific frequency's band. Bands are device specific and artificial
* definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
* however it is safe for now to assume that a frequency rule should not be
* part of a frequency's band if the start freq or end freq are off by more
* than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
* 60 GHz band.
* This resolution can be lowered and should be considered as we add
* regulatory rule support for other "bands".
**/
static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
u32 freq_khz)
{
#define ONE_GHZ_IN_KHZ 1000000
/*
* From 802.11ad: directional multi-gigabit (DMG):
* Pertaining to operation in a frequency band containing a channel
* with the Channel starting frequency above 45 GHz.
*/
u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
return true;
if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
return true;
return false;
#undef ONE_GHZ_IN_KHZ
}
/*
* Later on we can perhaps use the more restrictive DFS
* region but we don't have information for that yet so
* for now simply disallow conflicts.
*/
static enum nl80211_dfs_regions
reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1,
const enum nl80211_dfs_regions dfs_region2)
{
if (dfs_region1 != dfs_region2)
return NL80211_DFS_UNSET;
return dfs_region1;
}
/*
* Helper for regdom_intersect(), this does the real
* mathematical intersection fun
*/
static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
const struct ieee80211_regdomain *rd2,
const struct ieee80211_reg_rule *rule1,
const struct ieee80211_reg_rule *rule2,
struct ieee80211_reg_rule *intersected_rule)
{
const struct ieee80211_freq_range *freq_range1, *freq_range2;
struct ieee80211_freq_range *freq_range;
const struct ieee80211_power_rule *power_rule1, *power_rule2;
struct ieee80211_power_rule *power_rule;
u32 freq_diff, max_bandwidth1, max_bandwidth2;
freq_range1 = &rule1->freq_range;
freq_range2 = &rule2->freq_range;
freq_range = &intersected_rule->freq_range;
power_rule1 = &rule1->power_rule;
power_rule2 = &rule2->power_rule;
power_rule = &intersected_rule->power_rule;
freq_range->start_freq_khz = max(freq_range1->start_freq_khz,
freq_range2->start_freq_khz);
freq_range->end_freq_khz = min(freq_range1->end_freq_khz,
freq_range2->end_freq_khz);
max_bandwidth1 = freq_range1->max_bandwidth_khz;
max_bandwidth2 = freq_range2->max_bandwidth_khz;
if (rule1->flags & NL80211_RRF_AUTO_BW)
max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
if (rule2->flags & NL80211_RRF_AUTO_BW)
max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2);
intersected_rule->flags = rule1->flags | rule2->flags;
/*
* In case NL80211_RRF_AUTO_BW requested for both rules
* set AUTO_BW in intersected rule also. Next we will
* calculate BW correctly in handle_channel function.
* In other case remove AUTO_BW flag while we calculate
* maximum bandwidth correctly and auto calculation is
* not required.
*/
if ((rule1->flags & NL80211_RRF_AUTO_BW) &&
(rule2->flags & NL80211_RRF_AUTO_BW))
intersected_rule->flags |= NL80211_RRF_AUTO_BW;
else
intersected_rule->flags &= ~NL80211_RRF_AUTO_BW;
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
if (freq_range->max_bandwidth_khz > freq_diff)
freq_range->max_bandwidth_khz = freq_diff;
power_rule->max_eirp = min(power_rule1->max_eirp,
power_rule2->max_eirp);
power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
power_rule2->max_antenna_gain);
intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms,
rule2->dfs_cac_ms);
if (!is_valid_reg_rule(intersected_rule))
return -EINVAL;
return 0;
}
/* check whether old rule contains new rule */
static bool rule_contains(struct ieee80211_reg_rule *r1,
struct ieee80211_reg_rule *r2)
{
/* for simplicity, currently consider only same flags */
if (r1->flags != r2->flags)
return false;
/* verify r1 is more restrictive */
if ((r1->power_rule.max_antenna_gain >
r2->power_rule.max_antenna_gain) ||
r1->power_rule.max_eirp > r2->power_rule.max_eirp)
return false;
/* make sure r2's range is contained within r1 */
if (r1->freq_range.start_freq_khz > r2->freq_range.start_freq_khz ||
r1->freq_range.end_freq_khz < r2->freq_range.end_freq_khz)
return false;
/* and finally verify that r1.max_bw >= r2.max_bw */
if (r1->freq_range.max_bandwidth_khz <
r2->freq_range.max_bandwidth_khz)
return false;
return true;
}
/* add or extend current rules. do nothing if rule is already contained */
static void add_rule(struct ieee80211_reg_rule *rule,
struct ieee80211_reg_rule *reg_rules, u32 *n_rules)
{
struct ieee80211_reg_rule *tmp_rule;
int i;
for (i = 0; i < *n_rules; i++) {
tmp_rule = &reg_rules[i];
/* rule is already contained - do nothing */
if (rule_contains(tmp_rule, rule))
return;
/* extend rule if possible */
if (rule_contains(rule, tmp_rule)) {
memcpy(tmp_rule, rule, sizeof(*rule));
return;
}
}
memcpy(&reg_rules[*n_rules], rule, sizeof(*rule));
(*n_rules)++;
}
/**
* regdom_intersect - do the intersection between two regulatory domains
* @rd1: first regulatory domain
* @rd2: second regulatory domain
*
* Use this function to get the intersection between two regulatory domains.
* Once completed we will mark the alpha2 for the rd as intersected, "98",
* as no one single alpha2 can represent this regulatory domain.
*
* Returns a pointer to the regulatory domain structure which will hold the
* resulting intersection of rules between rd1 and rd2. We will
* kzalloc() this structure for you.
*/
static struct ieee80211_regdomain *
regdom_intersect(const struct ieee80211_regdomain *rd1,
const struct ieee80211_regdomain *rd2)
{
int r, size_of_regd;
unsigned int x, y;
unsigned int num_rules = 0;
const struct ieee80211_reg_rule *rule1, *rule2;
struct ieee80211_reg_rule intersected_rule;
struct ieee80211_regdomain *rd;
if (!rd1 || !rd2)
return NULL;
/*
* First we get a count of the rules we'll need, then we actually
* build them. This is to so we can malloc() and free() a
* regdomain once. The reason we use reg_rules_intersect() here
* is it will return -EINVAL if the rule computed makes no sense.
* All rules that do check out OK are valid.
*/
for (x = 0; x < rd1->n_reg_rules; x++) {
rule1 = &rd1->reg_rules[x];
for (y = 0; y < rd2->n_reg_rules; y++) {
rule2 = &rd2->reg_rules[y];
if (!reg_rules_intersect(rd1, rd2, rule1, rule2,
&intersected_rule))
num_rules++;
}
}
if (!num_rules)
return NULL;
size_of_regd = sizeof(struct ieee80211_regdomain) +
num_rules * sizeof(struct ieee80211_reg_rule);
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
return NULL;
for (x = 0; x < rd1->n_reg_rules; x++) {
rule1 = &rd1->reg_rules[x];
for (y = 0; y < rd2->n_reg_rules; y++) {
rule2 = &rd2->reg_rules[y];
r = reg_rules_intersect(rd1, rd2, rule1, rule2,
&intersected_rule);
/*
* No need to memset here the intersected rule here as
* we're not using the stack anymore
*/
if (r)
continue;
add_rule(&intersected_rule, rd->reg_rules,
&rd->n_reg_rules);
}
}
rd->alpha2[0] = '9';
rd->alpha2[1] = '8';
rd->dfs_region = reg_intersect_dfs_region(rd1->dfs_region,
rd2->dfs_region);
return rd;
}
/*
* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may
* want to just have the channel structure use these
*/
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
static u32 map_regdom_flags(u32 rd_flags)
{
u32 channel_flags = 0;
if (rd_flags & NL80211_RRF_NO_IR_ALL)
channel_flags |= IEEE80211_CHAN_NO_IR;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (rd_flags & NL80211_RRF_DFS)
channel_flags |= IEEE80211_CHAN_RADAR;
if (rd_flags & NL80211_RRF_NO_OFDM)
channel_flags |= IEEE80211_CHAN_NO_OFDM;
if (rd_flags & NL80211_RRF_NO_OUTDOOR)
channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
if (rd_flags & NL80211_RRF_IR_CONCURRENT)
channel_flags |= IEEE80211_CHAN_IR_CONCURRENT;
if (rd_flags & NL80211_RRF_NO_HT40MINUS)
channel_flags |= IEEE80211_CHAN_NO_HT40MINUS;
if (rd_flags & NL80211_RRF_NO_HT40PLUS)
channel_flags |= IEEE80211_CHAN_NO_HT40PLUS;
if (rd_flags & NL80211_RRF_NO_80MHZ)
channel_flags |= IEEE80211_CHAN_NO_80MHZ;
if (rd_flags & NL80211_RRF_NO_160MHZ)
channel_flags |= IEEE80211_CHAN_NO_160MHZ;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return channel_flags;
}
static const struct ieee80211_reg_rule *
freq_reg_info_regd(u32 center_freq,
const struct ieee80211_regdomain *regd, u32 bw)
{
int i;
bool band_rule_found = false;
bool bw_fits = false;
if (!regd)
return ERR_PTR(-EINVAL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
for (i = 0; i < regd->n_reg_rules; i++) {
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
const struct ieee80211_reg_rule *rr;
const struct ieee80211_freq_range *fr = NULL;
rr = &regd->reg_rules[i];
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
fr = &rr->freq_range;
/*
* We only need to know if one frequency rule was
* was in center_freq's band, that's enough, so lets
* not overwrite it once found
*/
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
bw_fits = cfg80211_does_bw_fit_range(fr, center_freq, bw);
if (band_rule_found && bw_fits)
return rr;
}
if (!band_rule_found)
return ERR_PTR(-ERANGE);
return ERR_PTR(-EINVAL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static const struct ieee80211_reg_rule *
__freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
{
const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy);
const struct ieee80211_reg_rule *reg_rule = NULL;
u32 bw;
for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
reg_rule = freq_reg_info_regd(center_freq, regd, bw);
if (!IS_ERR(reg_rule))
return reg_rule;
}
return reg_rule;
}
const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
u32 center_freq)
{
return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
}
EXPORT_SYMBOL(freq_reg_info);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
{
switch (initiator) {
case NL80211_REGDOM_SET_BY_CORE:
return "core";
case NL80211_REGDOM_SET_BY_USER:
return "user";
case NL80211_REGDOM_SET_BY_DRIVER:
return "driver";
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
return "country IE";
default:
WARN_ON(1);
return "bug";
}
}
EXPORT_SYMBOL(reg_initiator_name);
static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd,
const struct ieee80211_reg_rule *reg_rule,
const struct ieee80211_channel *chan)
{
const struct ieee80211_freq_range *freq_range = NULL;
u32 max_bandwidth_khz, bw_flags = 0;
freq_range = &reg_rule->freq_range;
max_bandwidth_khz = freq_range->max_bandwidth_khz;
/* Check if auto calculation requested */
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
/* If we get a reg_rule we can assume that at least 5Mhz fit */
if (!cfg80211_does_bw_fit_range(freq_range,
MHZ_TO_KHZ(chan->center_freq),
MHZ_TO_KHZ(10)))
bw_flags |= IEEE80211_CHAN_NO_10MHZ;
if (!cfg80211_does_bw_fit_range(freq_range,
MHZ_TO_KHZ(chan->center_freq),
MHZ_TO_KHZ(20)))
bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(10))
bw_flags |= IEEE80211_CHAN_NO_10MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(20))
bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
bw_flags |= IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
bw_flags |= IEEE80211_CHAN_NO_160MHZ;
return bw_flags;
}
/*
* Note that right now we assume the desired channel bandwidth
* is always 20 MHz for each individual channel (HT40 uses 20 MHz
* per channel, the primary and the extension channel).
*/
static void handle_channel(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
struct ieee80211_channel *chan)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
u32 flags, bw_flags = 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
struct wiphy *request_wiphy = NULL;
struct regulatory_request *lr = get_last_request();
const struct ieee80211_regdomain *regd;
request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
flags = chan->orig_flags;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq));
if (IS_ERR(reg_rule)) {
/*
* We will disable all channels that do not match our
* received regulatory rule unless the hint is coming
* from a Country IE and the Country IE had no information
* about a band. The IEEE 802.11 spec allows for an AP
* to send only a subset of the regulatory rules allowed,
* so an AP in the US that only supports 2.4 GHz may only send
* a country IE with information for the 2.4 GHz band
* while 5 GHz is still supported.
*/
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
PTR_ERR(reg_rule) == -ERANGE)
return;
if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
pr_debug("Disabling freq %d MHz for good\n",
chan->center_freq);
chan->orig_flags |= IEEE80211_CHAN_DISABLED;
chan->flags = chan->orig_flags;
} else {
pr_debug("Disabling freq %d MHz\n",
chan->center_freq);
chan->flags |= IEEE80211_CHAN_DISABLED;
}
return;
}
regd = reg_get_regdomain(wiphy);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
power_rule = &reg_rule->power_rule;
bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
/*
* This guarantees the driver's requested regulatory domain
* will always be used as a base for further regulatory
* settings
*/
chan->flags = chan->orig_flags =
map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
chan->max_reg_power = chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
if (chan->flags & IEEE80211_CHAN_RADAR) {
chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
if (reg_rule->dfs_cac_ms)
chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
}
return;
}
chan->dfs_state = NL80211_DFS_USABLE;
chan->dfs_state_entered = jiffies;
chan->beacon_found = false;
chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain =
min_t(int, chan->orig_mag,
MBI_TO_DBI(power_rule->max_antenna_gain));
chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp);
if (chan->flags & IEEE80211_CHAN_RADAR) {
if (reg_rule->dfs_cac_ms)
chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
else
chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
}
if (chan->orig_mpwr) {
/*
* Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER
* will always follow the passed country IE power settings.
*/
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER)
chan->max_power = chan->max_reg_power;
else
chan->max_power = min(chan->orig_mpwr,
chan->max_reg_power);
} else
chan->max_power = chan->max_reg_power;
}
static void handle_band(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
struct ieee80211_supported_band *sband)
{
unsigned int i;
if (!sband)
return;
for (i = 0; i < sband->n_channels; i++)
handle_channel(wiphy, initiator, &sband->channels[i]);
}
static bool reg_request_cell_base(struct regulatory_request *request)
{
if (request->initiator != NL80211_REGDOM_SET_BY_USER)
return false;
return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE;
}
bool reg_last_request_cell_base(void)
{
return reg_request_cell_base(get_last_request());
}
#ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS
/* Core specific check */
static enum reg_request_treatment
reg_ignore_cell_hint(struct regulatory_request *pending_request)
{
struct regulatory_request *lr = get_last_request();
if (!reg_num_devs_support_basehint)
return REG_REQ_IGNORE;
if (reg_request_cell_base(lr) &&
!regdom_changes(pending_request->alpha2))
return REG_REQ_ALREADY_SET;
return REG_REQ_OK;
}
/* Device specific check */
static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy)
{
return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS);
}
#else
static enum reg_request_treatment
reg_ignore_cell_hint(struct regulatory_request *pending_request)
{
return REG_REQ_IGNORE;
}
static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy)
{
return true;
}
#endif
static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy)
{
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
if (wiphy->regulatory_flags & REGULATORY_STRICT_REG &&
!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG))
return true;
return false;
}
static bool ignore_reg_update(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
{
struct regulatory_request *lr = get_last_request();
if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED)
return true;
if (!lr) {
pr_debug("Ignoring regulatory request set by %s since last_request is not set\n",
reg_initiator_name(initiator));
return true;
}
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
pr_debug("Ignoring regulatory request set by %s since the driver uses its own custom regulatory domain\n",
reg_initiator_name(initiator));
return true;
}
/*
* wiphy->regd will be set once the device has its own
* desired regulatory domain set
*/
if (wiphy_strict_alpha2_regd(wiphy) && !wiphy->regd &&
initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
!is_world_regdom(lr->alpha2)) {
pr_debug("Ignoring regulatory request set by %s since the driver requires its own regulatory domain to be set first\n",
reg_initiator_name(initiator));
return true;
}
if (reg_request_cell_base(lr))
return reg_dev_ignore_cell_hint(wiphy);
return false;
}
static bool reg_is_world_roaming(struct wiphy *wiphy)
{
const struct ieee80211_regdomain *cr = get_cfg80211_regdom();
const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy);
struct regulatory_request *lr = get_last_request();
if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2)))
return true;
if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
return true;
return false;
}
static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx,
struct reg_beacon *reg_beacon)
{
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
bool channel_changed = false;
struct ieee80211_channel chan_before;
sband = wiphy->bands[reg_beacon->chan.band];
chan = &sband->channels[chan_idx];
if (likely(chan->center_freq != reg_beacon->chan.center_freq))
return;
if (chan->beacon_found)
return;
chan->beacon_found = true;
if (!reg_is_world_roaming(wiphy))
return;
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS)
cfg80211: fix regression on beacon world roaming feature A regression was added through patch a4ed90d6: "cfg80211: respect API on orig_flags on channel for beacon hint" We did indeed respect _orig flags but the intention was not clearly stated in the commit log. This patch fixes firmware issues picked up by iwlwifi when we lift passive scan of beaconing restrictions on channels its EEPROM has been configured to always enable. By doing so though we also disallowed beacon hints on devices registering their wiphy with custom world regulatory domains enabled, this happens to be currently ath5k, ath9k and ar9170. The passive scan and beacon restrictions on those devices would never be lifted even if we did find a beacon and the hardware did support such enhancements when world roaming. Since Johannes indicates iwlwifi firmware cannot be changed to allow beacon hinting we set up a flag now to specifically allow drivers to disable beacon hints for devices which cannot use them. We enable the flag on iwlwifi to disable beacon hints and by default enable it for all other drivers. It should be noted beacon hints lift passive scan flags and beacon restrictions when we receive a beacon from an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz band. We don't bother with channels 1-11 as those channels are allowed world wide. This should fix world roaming for ath5k, ath9k and ar9170, thereby improving scan time when we receive the first beacon from any AP, and also enabling beaconing operation (AP/IBSS/Mesh) on cards which would otherwise not be allowed to do so. Drivers not using custom regulatory stuff (wiphy_apply_custom_regulatory()) were not affected by this as the orig_flags for the channels would have been cleared upon wiphy registration. I tested this with a world roaming ath5k card. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-31 08:43:48 +08:00
return;
chan_before.center_freq = chan->center_freq;
chan_before.flags = chan->flags;
if (chan->flags & IEEE80211_CHAN_NO_IR) {
chan->flags &= ~IEEE80211_CHAN_NO_IR;
channel_changed = true;
}
if (channel_changed)
nl80211_send_beacon_hint_event(wiphy, &chan_before, chan);
}
/*
* Called when a scan on a wiphy finds a beacon on
* new channel
*/
static void wiphy_update_new_beacon(struct wiphy *wiphy,
struct reg_beacon *reg_beacon)
{
unsigned int i;
struct ieee80211_supported_band *sband;
if (!wiphy->bands[reg_beacon->chan.band])
return;
sband = wiphy->bands[reg_beacon->chan.band];
for (i = 0; i < sband->n_channels; i++)
handle_reg_beacon(wiphy, i, reg_beacon);
}
/*
* Called upon reg changes or a new wiphy is added
*/
static void wiphy_update_beacon_reg(struct wiphy *wiphy)
{
unsigned int i;
struct ieee80211_supported_band *sband;
struct reg_beacon *reg_beacon;
list_for_each_entry(reg_beacon, &reg_beacon_list, list) {
if (!wiphy->bands[reg_beacon->chan.band])
continue;
sband = wiphy->bands[reg_beacon->chan.band];
for (i = 0; i < sband->n_channels; i++)
handle_reg_beacon(wiphy, i, reg_beacon);
}
}
/* Reap the advantages of previously found beacons */
static void reg_process_beacons(struct wiphy *wiphy)
{
cfg80211: fix bug while trying to process beacon hints on init During initialization we would not have received any beacons so skip processing reg beacon hints, also adds a check to reg_is_world_roaming() for last_request before accessing its fields. This should fix this: BUG: unable to handle kernel NULL pointer dereference at IP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295 *pdpt = 0000000008bf1001 *pde = 0000000000000000 Oops: 0000 [#1] last sysfs file: /sys/class/backlight/eeepc/brightness Modules linked in: ath5k(+) mac80211 led_class cfg80211 go_bit cfbcopyarea cfbimgblt cfbfillrect ipv6 ydev usual_tables(P) snd_hda_codec_realtek snd_hda_intel nd_hwdep uhci_hcd snd_pcm_oss snd_mixer_oss i2c_i801 e serio_raw i2c_core pcspkr atl2 snd_pcm intel_agp re agpgart eeepc_laptop snd_page_alloc ac video backlight rfkill button processor evdev thermal fan ata_generic Pid: 2909, comm: modprobe Tainted: Pc #112) 701 EIP: 0060:[<e0171332>] EFLAGS: 00010246 CPU: 0 EIP is at wiphy_update_regulatory+0x20f/0x295 [cfg80211] EAX: 00000000 EBX: c5da0000 ECX: 00000000 EDX: c5da0060 ESI: 0000001a EDI: c5da0060 EBP: df3bdd70 ESP: df3bdd40 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process modprobe (pid: 2909, ti=df3bc000 task=c5d030000) Stack: df3bdd90 c5da0060 c04277e0 00000001 00000044 c04277e402 00000002 c5da0000 0000001a c5da0060 df3bdda8 e01706a2 02 00000282 000080d0 00000068 c5d53500 00000080 0000028240 Call Trace: [<e01706a2>] ? wiphy_register+0x122/0x1b7 [cfg80211] [<e0328e02>] ? ieee80211_register_hw+0xd8/0x346 [<e06a7c9f>] ? ath5k_hw_set_bssid_mask+0x71/0x78 [ath5k] [<e06b0c52>] ? ath5k_pci_probe+0xa5c/0xd0a [ath5k] [<c01a6037>] ? sysfs_find_dirent+0x16/0x27 [<c01fec95>] ? local_pci_probe+0xe/0x10 [<c01ff526>] ? pci_device_probe+0x48/0x66 [<c024c9fd>] ? driver_probe_device+0x7f/0xf2 [<c024cab3>] ? __driver_attach+0x43/0x5f [<c024c0af>] ? bus_for_each_dev+0x39/0x5a [<c024c8d0>] ? driver_attach+0x14/0x16 [<c024ca70>] ? __driver_attach+0x0/0x5f [<c024c5b3>] ? bus_add_driver+0xd7/0x1e7 [<c024ccb9>] ? driver_register+0x7b/0xd7 [<c01ff827>] ? __pci_register_driver+0x32/0x85 [<e00a8018>] ? init_ath5k_pci+0x18/0x30 [ath5k] [<c0101131>] ? _stext+0x49/0x10b [<e00a8000>] ? init_ath5k_pci+0x0/0x30 [ath5k] [<c012f452>] ? __blocking_notifier_call_chain+0x40/0x4c [<c013a714>] ? sys_init_module+0x87/0x18b [<c0102804>] ? sysenter_do_call+0x12/0x22 Code: b8 da 17 e0 83 c0 04 e8 92 f9 ff ff 84 c0 75 2a 8b 85 c0 74 0c 83 c0 04 e8 7c f9 ff ff 84 c0 75 14 a1 bc da 4 03 74 66 8b 4d d4 80 79 08 00 74 5d a1 e0 d2 17 e0 48 EIP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295 SP 0068:df3bdd40 CR2: 0000000000000004 ---[ end trace 830f2dd2a95fd1a8 ]--- This issue is hard to reproduce, but it was noticed and discussed on this thread: http://marc.info/?t=123938022700005&r=1&w=2 Cc: stable@kernel.org Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-02 12:34:15 +08:00
/*
* Means we are just firing up cfg80211, so no beacons would
* have been processed yet.
*/
if (!last_request)
return;
wiphy_update_beacon_reg(wiphy);
}
static bool is_ht40_allowed(struct ieee80211_channel *chan)
{
if (!chan)
return false;
if (chan->flags & IEEE80211_CHAN_DISABLED)
return false;
/* This would happen when regulatory rules disallow HT40 completely */
if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40)
return false;
return true;
}
static void reg_process_ht_flags_channel(struct wiphy *wiphy,
struct ieee80211_channel *channel)
{
struct ieee80211_supported_band *sband = wiphy->bands[channel->band];
struct ieee80211_channel *channel_before = NULL, *channel_after = NULL;
unsigned int i;
if (!is_ht40_allowed(channel)) {
channel->flags |= IEEE80211_CHAN_NO_HT40;
return;
}
/*
* We need to ensure the extension channels exist to
* be able to use HT40- or HT40+, this finds them (or not)
*/
for (i = 0; i < sband->n_channels; i++) {
struct ieee80211_channel *c = &sband->channels[i];
if (c->center_freq == (channel->center_freq - 20))
channel_before = c;
if (c->center_freq == (channel->center_freq + 20))
channel_after = c;
}
/*
* Please note that this assumes target bandwidth is 20 MHz,
* if that ever changes we also need to change the below logic
* to include that as well.
*/
if (!is_ht40_allowed(channel_before))
channel->flags |= IEEE80211_CHAN_NO_HT40MINUS;
else
channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
if (!is_ht40_allowed(channel_after))
channel->flags |= IEEE80211_CHAN_NO_HT40PLUS;
else
channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
}
static void reg_process_ht_flags_band(struct wiphy *wiphy,
struct ieee80211_supported_band *sband)
{
unsigned int i;
if (!sband)
return;
for (i = 0; i < sband->n_channels; i++)
reg_process_ht_flags_channel(wiphy, &sband->channels[i]);
}
static void reg_process_ht_flags(struct wiphy *wiphy)
{
enum nl80211_band band;
if (!wiphy)
return;
for (band = 0; band < NUM_NL80211_BANDS; band++)
reg_process_ht_flags_band(wiphy, wiphy->bands[band]);
}
static void reg_call_notifier(struct wiphy *wiphy,
struct regulatory_request *request)
{
if (wiphy->reg_notifier)
wiphy->reg_notifier(wiphy, request);
}
static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
{
struct cfg80211_chan_def chandef;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
enum nl80211_iftype iftype;
wdev_lock(wdev);
iftype = wdev->iftype;
/* make sure the interface is active */
if (!wdev->netdev || !netif_running(wdev->netdev))
goto wdev_inactive_unlock;
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (!wdev->beacon_interval)
goto wdev_inactive_unlock;
chandef = wdev->chandef;
break;
case NL80211_IFTYPE_ADHOC:
if (!wdev->ssid_len)
goto wdev_inactive_unlock;
chandef = wdev->chandef;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (!wdev->current_bss ||
!wdev->current_bss->pub.channel)
goto wdev_inactive_unlock;
if (!rdev->ops->get_channel ||
rdev_get_channel(rdev, wdev, &chandef))
cfg80211_chandef_create(&chandef,
wdev->current_bss->pub.channel,
NL80211_CHAN_NO_HT);
break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_DEVICE:
/* no enforcement required */
break;
default:
/* others not implemented for now */
WARN_ON(1);
break;
}
wdev_unlock(wdev);
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_ADHOC:
return cfg80211_reg_can_beacon_relax(wiphy, &chandef, iftype);
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
return cfg80211_chandef_usable(wiphy, &chandef,
IEEE80211_CHAN_DISABLED);
default:
break;
}
return true;
wdev_inactive_unlock:
wdev_unlock(wdev);
return true;
}
static void reg_leave_invalid_chans(struct wiphy *wiphy)
{
struct wireless_dev *wdev;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list)
if (!reg_wdev_chan_valid(wiphy, wdev))
cfg80211_leave(rdev, wdev);
}
static void reg_check_chans_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
pr_debug("Verifying active interfaces after reg change\n");
rtnl_lock();
list_for_each_entry(rdev, &cfg80211_rdev_list, list)
if (!(rdev->wiphy.regulatory_flags &
REGULATORY_IGNORE_STALE_KICKOFF))
reg_leave_invalid_chans(&rdev->wiphy);
rtnl_unlock();
}
static void reg_check_channels(void)
{
/*
* Give usermode a chance to do something nicer (move to another
* channel, orderly disconnection), before forcing a disconnection.
*/
mod_delayed_work(system_power_efficient_wq,
&reg_check_chans,
msecs_to_jiffies(REG_ENFORCE_GRACE_MS));
}
static void wiphy_update_regulatory(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
enum nl80211_band band;
struct regulatory_request *lr = get_last_request();
if (ignore_reg_update(wiphy, initiator)) {
/*
* Regulatory updates set by CORE are ignored for custom
* regulatory cards. Let us notify the changes to the driver,
* as some drivers used this to restore its orig_* reg domain.
*/
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)
reg_call_notifier(wiphy, lr);
return;
}
lr->dfs_region = get_cfg80211_regdom()->dfs_region;
for (band = 0; band < NUM_NL80211_BANDS; band++)
handle_band(wiphy, initiator, wiphy->bands[band]);
reg_process_beacons(wiphy);
reg_process_ht_flags(wiphy);
reg_call_notifier(wiphy, lr);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)
{
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
ASSERT_RTNL();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
wiphy = &rdev->wiphy;
wiphy_update_regulatory(wiphy, initiator);
}
reg_check_channels();
}
static void handle_channel_custom(struct wiphy *wiphy,
struct ieee80211_channel *chan,
const struct ieee80211_regdomain *regd)
{
u32 bw_flags = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
u32 bw;
cfg80211: fix race condition with wiphy_apply_custom_regulatory() We forgot to lock using the cfg80211_mutex in wiphy_apply_custom_regulatory(). Without the lock there is possible race between processing a reply from CRDA and a driver calling wiphy_apply_custom_regulatory(). During the processing of the reply from CRDA we free last_request and wiphy_apply_custom_regulatory() eventually accesses an element from last_request in the through freq_reg_info_regd(). This is very difficult to reproduce (I haven't), it takes us 3 hours and you need to be banging hard, but the race is obvious by looking at the code. This should only affect those who use this caller, which currently is ath5k, ath9k, and ar9170. EIP: 0060:[<f8ebec50>] EFLAGS: 00210282 CPU: 1 EIP is at freq_reg_info_regd+0x24/0x121 [cfg80211] EAX: 00000000 EBX: f7ca0060 ECX: f5183d94 EDX: 0024cde0 ESI: f8f56edc EDI: 00000000 EBP: 00000000 ESP: f5183d44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 14617, ti=f5182000 task=f3934d10 task.ti=f5182000) Stack: c0505300 f7ca0ab4 f5183d94 0024cde0 f8f403a6 f8f63160 f7ca0060 00000000 00000000 f8ebedf8 f5183d90 f8f56edc 00000000 00000004 00000f40 f8f56edc f7ca0060 f7ca1234 00000000 00000000 00000000 f7ca14f0 f7ca0ab4 f7ca1289 Call Trace: [<f8ebedf8>] wiphy_apply_custom_regulatory+0x8f/0x122 [cfg80211] [<f8f3f798>] ath_attach+0x707/0x9e6 [ath9k] [<f8f45e46>] ath_pci_probe+0x18d/0x29a [ath9k] [<c023c7ba>] pci_device_probe+0xa3/0xe4 [<c02a860b>] really_probe+0xd7/0x1de [<c02a87e7>] __driver_attach+0x37/0x55 [<c02a7eed>] bus_for_each_dev+0x31/0x57 [<c02a83bd>] driver_attach+0x16/0x18 [<c02a78e6>] bus_add_driver+0xec/0x21b [<c02a8959>] driver_register+0x85/0xe2 [<c023c9bb>] __pci_register_driver+0x3c/0x69 [<f8e93043>] ath9k_init+0x43/0x68 [ath9k] [<c010112b>] _stext+0x3b/0x116 [<c014a872>] sys_init_module+0x8a/0x19e [<c01049ad>] sysenter_do_call+0x12/0x21 [<ffffe430>] 0xffffe430 ======================= Code: 0f 94 c0 c3 31 c0 c3 55 57 56 53 89 c3 83 ec 14 8b 74 24 2c 89 54 24 0c 89 4c 24 08 85 f6 75 06 8b 35 c8 bb ec f8 a1 cc bb ec f8 <8b> 40 04 83 f8 03 74 3a 48 74 37 8b 43 28 85 c0 74 30 89 c6 8b EIP: [<f8ebec50>] freq_reg_info_regd+0x24/0x121 [cfg80211] SS:ESP 0068:f5183d44 Cc: stable@kernel.org Reported-by: Nataraj Sadasivam <Nataraj.Sadasivam@Atheros.com> Reported-by: Vivek Natarajan <Vivek.Natarajan@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-02 06:44:50 +08:00
for (bw = MHZ_TO_KHZ(20); bw >= MHZ_TO_KHZ(5); bw = bw / 2) {
reg_rule = freq_reg_info_regd(MHZ_TO_KHZ(chan->center_freq),
regd, bw);
if (!IS_ERR(reg_rule))
break;
}
if (IS_ERR(reg_rule)) {
pr_debug("Disabling freq %d MHz as custom regd has no rule that fits it\n",
chan->center_freq);
if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) {
chan->flags |= IEEE80211_CHAN_DISABLED;
} else {
chan->orig_flags |= IEEE80211_CHAN_DISABLED;
chan->flags = chan->orig_flags;
}
return;
}
power_rule = &reg_rule->power_rule;
bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan);
chan->dfs_state_entered = jiffies;
chan->dfs_state = NL80211_DFS_USABLE;
chan->beacon_found = false;
if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED)
chan->flags = chan->orig_flags | bw_flags |
map_regdom_flags(reg_rule->flags);
else
chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
chan->max_reg_power = chan->max_power =
(int) MBM_TO_DBM(power_rule->max_eirp);
if (chan->flags & IEEE80211_CHAN_RADAR) {
if (reg_rule->dfs_cac_ms)
chan->dfs_cac_ms = reg_rule->dfs_cac_ms;
else
chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS;
}
chan->max_power = chan->max_reg_power;
}
static void handle_band_custom(struct wiphy *wiphy,
struct ieee80211_supported_band *sband,
const struct ieee80211_regdomain *regd)
{
unsigned int i;
if (!sband)
return;
for (i = 0; i < sband->n_channels; i++)
handle_channel_custom(wiphy, &sband->channels[i], regd);
}
/* Used by drivers prior to wiphy registration */
void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd)
{
enum nl80211_band band;
unsigned int bands_set = 0;
cfg80211: fix race condition with wiphy_apply_custom_regulatory() We forgot to lock using the cfg80211_mutex in wiphy_apply_custom_regulatory(). Without the lock there is possible race between processing a reply from CRDA and a driver calling wiphy_apply_custom_regulatory(). During the processing of the reply from CRDA we free last_request and wiphy_apply_custom_regulatory() eventually accesses an element from last_request in the through freq_reg_info_regd(). This is very difficult to reproduce (I haven't), it takes us 3 hours and you need to be banging hard, but the race is obvious by looking at the code. This should only affect those who use this caller, which currently is ath5k, ath9k, and ar9170. EIP: 0060:[<f8ebec50>] EFLAGS: 00210282 CPU: 1 EIP is at freq_reg_info_regd+0x24/0x121 [cfg80211] EAX: 00000000 EBX: f7ca0060 ECX: f5183d94 EDX: 0024cde0 ESI: f8f56edc EDI: 00000000 EBP: 00000000 ESP: f5183d44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 14617, ti=f5182000 task=f3934d10 task.ti=f5182000) Stack: c0505300 f7ca0ab4 f5183d94 0024cde0 f8f403a6 f8f63160 f7ca0060 00000000 00000000 f8ebedf8 f5183d90 f8f56edc 00000000 00000004 00000f40 f8f56edc f7ca0060 f7ca1234 00000000 00000000 00000000 f7ca14f0 f7ca0ab4 f7ca1289 Call Trace: [<f8ebedf8>] wiphy_apply_custom_regulatory+0x8f/0x122 [cfg80211] [<f8f3f798>] ath_attach+0x707/0x9e6 [ath9k] [<f8f45e46>] ath_pci_probe+0x18d/0x29a [ath9k] [<c023c7ba>] pci_device_probe+0xa3/0xe4 [<c02a860b>] really_probe+0xd7/0x1de [<c02a87e7>] __driver_attach+0x37/0x55 [<c02a7eed>] bus_for_each_dev+0x31/0x57 [<c02a83bd>] driver_attach+0x16/0x18 [<c02a78e6>] bus_add_driver+0xec/0x21b [<c02a8959>] driver_register+0x85/0xe2 [<c023c9bb>] __pci_register_driver+0x3c/0x69 [<f8e93043>] ath9k_init+0x43/0x68 [ath9k] [<c010112b>] _stext+0x3b/0x116 [<c014a872>] sys_init_module+0x8a/0x19e [<c01049ad>] sysenter_do_call+0x12/0x21 [<ffffe430>] 0xffffe430 ======================= Code: 0f 94 c0 c3 31 c0 c3 55 57 56 53 89 c3 83 ec 14 8b 74 24 2c 89 54 24 0c 89 4c 24 08 85 f6 75 06 8b 35 c8 bb ec f8 a1 cc bb ec f8 <8b> 40 04 83 f8 03 74 3a 48 74 37 8b 43 28 85 c0 74 30 89 c6 8b EIP: [<f8ebec50>] freq_reg_info_regd+0x24/0x121 [cfg80211] SS:ESP 0068:f5183d44 Cc: stable@kernel.org Reported-by: Nataraj Sadasivam <Nataraj.Sadasivam@Atheros.com> Reported-by: Vivek Natarajan <Vivek.Natarajan@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-02 06:44:50 +08:00
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG),
"wiphy should have REGULATORY_CUSTOM_REG\n");
wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
if (!wiphy->bands[band])
continue;
handle_band_custom(wiphy, wiphy->bands[band], regd);
bands_set++;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
/*
* no point in calling this if it won't have any effect
* on your device's supported bands.
*/
WARN_ON(!bands_set);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
static void reg_set_request_processed(void)
{
bool need_more_processing = false;
struct regulatory_request *lr = get_last_request();
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
lr->processed = true;
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
spin_lock(&reg_requests_lock);
if (!list_empty(&reg_requests_list))
need_more_processing = true;
spin_unlock(&reg_requests_lock);
cancel_crda_timeout();
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
if (need_more_processing)
schedule_work(&reg_work);
}
/**
* reg_process_hint_core - process core regulatory requests
* @pending_request: a pending core regulatory request
*
* The wireless subsystem can use this function to process
* a regulatory request issued by the regulatory core.
*/
static enum reg_request_treatment
reg_process_hint_core(struct regulatory_request *core_request)
{
if (reg_query_database(core_request)) {
core_request->intersect = false;
core_request->processed = false;
reg_update_last_request(core_request);
return REG_REQ_OK;
}
return REG_REQ_IGNORE;
}
static enum reg_request_treatment
__reg_process_hint_user(struct regulatory_request *user_request)
{
struct regulatory_request *lr = get_last_request();
if (reg_request_cell_base(user_request))
return reg_ignore_cell_hint(user_request);
if (reg_request_cell_base(lr))
return REG_REQ_IGNORE;
if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
return REG_REQ_INTERSECT;
/*
* If the user knows better the user should set the regdom
* to their country before the IE is picked up
*/
if (lr->initiator == NL80211_REGDOM_SET_BY_USER &&
lr->intersect)
return REG_REQ_IGNORE;
/*
* Process user requests only after previous user/driver/core
* requests have been processed
*/
if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE ||
lr->initiator == NL80211_REGDOM_SET_BY_DRIVER ||
lr->initiator == NL80211_REGDOM_SET_BY_USER) &&
regdom_changes(lr->alpha2))
return REG_REQ_IGNORE;
if (!regdom_changes(user_request->alpha2))
return REG_REQ_ALREADY_SET;
return REG_REQ_OK;
}
/**
* reg_process_hint_user - process user regulatory requests
* @user_request: a pending user regulatory request
*
* The wireless subsystem can use this function to process
* a regulatory request initiated by userspace.
*/
static enum reg_request_treatment
reg_process_hint_user(struct regulatory_request *user_request)
{
enum reg_request_treatment treatment;
treatment = __reg_process_hint_user(user_request);
if (treatment == REG_REQ_IGNORE ||
treatment == REG_REQ_ALREADY_SET)
return REG_REQ_IGNORE;
user_request->intersect = treatment == REG_REQ_INTERSECT;
user_request->processed = false;
if (reg_query_database(user_request)) {
reg_update_last_request(user_request);
user_alpha2[0] = user_request->alpha2[0];
user_alpha2[1] = user_request->alpha2[1];
return REG_REQ_OK;
}
return REG_REQ_IGNORE;
}
static enum reg_request_treatment
__reg_process_hint_driver(struct regulatory_request *driver_request)
{
struct regulatory_request *lr = get_last_request();
if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) {
if (regdom_changes(driver_request->alpha2))
return REG_REQ_OK;
return REG_REQ_ALREADY_SET;
}
/*
* This would happen if you unplug and plug your card
* back in or if you add a new device for which the previously
* loaded card also agrees on the regulatory domain.
*/
if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
!regdom_changes(driver_request->alpha2))
return REG_REQ_ALREADY_SET;
return REG_REQ_INTERSECT;
}
/**
* reg_process_hint_driver - process driver regulatory requests
* @driver_request: a pending driver regulatory request
*
* The wireless subsystem can use this function to process
* a regulatory request issued by an 802.11 driver.
*
* Returns one of the different reg request treatment values.
*/
static enum reg_request_treatment
reg_process_hint_driver(struct wiphy *wiphy,
struct regulatory_request *driver_request)
{
const struct ieee80211_regdomain *regd, *tmp;
enum reg_request_treatment treatment;
treatment = __reg_process_hint_driver(driver_request);
switch (treatment) {
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
return REG_REQ_IGNORE;
case REG_REQ_INTERSECT:
case REG_REQ_ALREADY_SET:
regd = reg_copy_regd(get_cfg80211_regdom());
if (IS_ERR(regd))
return REG_REQ_IGNORE;
tmp = get_wiphy_regdom(wiphy);
rcu_assign_pointer(wiphy->regd, regd);
rcu_free_regdom(tmp);
}
driver_request->intersect = treatment == REG_REQ_INTERSECT;
driver_request->processed = false;
/*
* Since CRDA will not be called in this case as we already
* have applied the requested regulatory domain before we just
* inform userspace we have processed the request
*/
if (treatment == REG_REQ_ALREADY_SET) {
nl80211_send_reg_change_event(driver_request);
reg_update_last_request(driver_request);
reg_set_request_processed();
return REG_REQ_ALREADY_SET;
}
if (reg_query_database(driver_request)) {
reg_update_last_request(driver_request);
return REG_REQ_OK;
}
return REG_REQ_IGNORE;
}
static enum reg_request_treatment
__reg_process_hint_country_ie(struct wiphy *wiphy,
struct regulatory_request *country_ie_request)
{
struct wiphy *last_wiphy = NULL;
struct regulatory_request *lr = get_last_request();
if (reg_request_cell_base(lr)) {
/* Trust a Cell base station over the AP's country IE */
if (regdom_changes(country_ie_request->alpha2))
return REG_REQ_IGNORE;
return REG_REQ_ALREADY_SET;
} else {
if (wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_IGNORE)
return REG_REQ_IGNORE;
}
if (unlikely(!is_an_alpha2(country_ie_request->alpha2)))
return -EINVAL;
if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE)
return REG_REQ_OK;
last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
if (last_wiphy != wiphy) {
/*
* Two cards with two APs claiming different
* Country IE alpha2s. We could
* intersect them, but that seems unlikely
* to be correct. Reject second one for now.
*/
if (regdom_changes(country_ie_request->alpha2))
return REG_REQ_IGNORE;
return REG_REQ_ALREADY_SET;
}
if (regdom_changes(country_ie_request->alpha2))
return REG_REQ_OK;
return REG_REQ_ALREADY_SET;
}
/**
* reg_process_hint_country_ie - process regulatory requests from country IEs
* @country_ie_request: a regulatory request from a country IE
*
* The wireless subsystem can use this function to process
* a regulatory request issued by a country Information Element.
*
* Returns one of the different reg request treatment values.
*/
static enum reg_request_treatment
reg_process_hint_country_ie(struct wiphy *wiphy,
struct regulatory_request *country_ie_request)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
enum reg_request_treatment treatment;
treatment = __reg_process_hint_country_ie(wiphy, country_ie_request);
switch (treatment) {
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
return REG_REQ_IGNORE;
case REG_REQ_ALREADY_SET:
reg_free_request(country_ie_request);
return REG_REQ_ALREADY_SET;
case REG_REQ_INTERSECT:
/*
* This doesn't happen yet, not sure we
* ever want to support it for this case.
*/
WARN_ONCE(1, "Unexpected intersection for country IEs");
return REG_REQ_IGNORE;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
country_ie_request->intersect = false;
country_ie_request->processed = false;
if (reg_query_database(country_ie_request)) {
reg_update_last_request(country_ie_request);
return REG_REQ_OK;
}
return REG_REQ_IGNORE;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
bool reg_dfs_domain_same(struct wiphy *wiphy1, struct wiphy *wiphy2)
{
const struct ieee80211_regdomain *wiphy1_regd = NULL;
const struct ieee80211_regdomain *wiphy2_regd = NULL;
const struct ieee80211_regdomain *cfg80211_regd = NULL;
bool dfs_domain_same;
rcu_read_lock();
cfg80211_regd = rcu_dereference(cfg80211_regdomain);
wiphy1_regd = rcu_dereference(wiphy1->regd);
if (!wiphy1_regd)
wiphy1_regd = cfg80211_regd;
wiphy2_regd = rcu_dereference(wiphy2->regd);
if (!wiphy2_regd)
wiphy2_regd = cfg80211_regd;
dfs_domain_same = wiphy1_regd->dfs_region == wiphy2_regd->dfs_region;
rcu_read_unlock();
return dfs_domain_same;
}
static void reg_copy_dfs_chan_state(struct ieee80211_channel *dst_chan,
struct ieee80211_channel *src_chan)
{
if (!(dst_chan->flags & IEEE80211_CHAN_RADAR) ||
!(src_chan->flags & IEEE80211_CHAN_RADAR))
return;
if (dst_chan->flags & IEEE80211_CHAN_DISABLED ||
src_chan->flags & IEEE80211_CHAN_DISABLED)
return;
if (src_chan->center_freq == dst_chan->center_freq &&
dst_chan->dfs_state == NL80211_DFS_USABLE) {
dst_chan->dfs_state = src_chan->dfs_state;
dst_chan->dfs_state_entered = src_chan->dfs_state_entered;
}
}
static void wiphy_share_dfs_chan_state(struct wiphy *dst_wiphy,
struct wiphy *src_wiphy)
{
struct ieee80211_supported_band *src_sband, *dst_sband;
struct ieee80211_channel *src_chan, *dst_chan;
int i, j, band;
if (!reg_dfs_domain_same(dst_wiphy, src_wiphy))
return;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
dst_sband = dst_wiphy->bands[band];
src_sband = src_wiphy->bands[band];
if (!dst_sband || !src_sband)
continue;
for (i = 0; i < dst_sband->n_channels; i++) {
dst_chan = &dst_sband->channels[i];
for (j = 0; j < src_sband->n_channels; j++) {
src_chan = &src_sband->channels[j];
reg_copy_dfs_chan_state(dst_chan, src_chan);
}
}
}
}
static void wiphy_all_share_dfs_chan_state(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (wiphy == &rdev->wiphy)
continue;
wiphy_share_dfs_chan_state(wiphy, &rdev->wiphy);
}
}
/* This processes *all* regulatory hints */
static void reg_process_hint(struct regulatory_request *reg_request)
{
struct wiphy *wiphy = NULL;
enum reg_request_treatment treatment;
if (reg_request->wiphy_idx != WIPHY_IDX_INVALID)
wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
switch (reg_request->initiator) {
case NL80211_REGDOM_SET_BY_CORE:
treatment = reg_process_hint_core(reg_request);
break;
case NL80211_REGDOM_SET_BY_USER:
treatment = reg_process_hint_user(reg_request);
break;
case NL80211_REGDOM_SET_BY_DRIVER:
if (!wiphy)
goto out_free;
treatment = reg_process_hint_driver(wiphy, reg_request);
break;
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
if (!wiphy)
goto out_free;
treatment = reg_process_hint_country_ie(wiphy, reg_request);
break;
default:
WARN(1, "invalid initiator %d\n", reg_request->initiator);
goto out_free;
}
if (treatment == REG_REQ_IGNORE)
goto out_free;
WARN(treatment != REG_REQ_OK && treatment != REG_REQ_ALREADY_SET,
"unexpected treatment value %d\n", treatment);
/* This is required so that the orig_* parameters are saved.
* NOTE: treatment must be set for any case that reaches here!
*/
if (treatment == REG_REQ_ALREADY_SET && wiphy &&
wiphy->regulatory_flags & REGULATORY_STRICT_REG) {
wiphy_update_regulatory(wiphy, reg_request->initiator);
wiphy_all_share_dfs_chan_state(wiphy);
reg_check_channels();
}
return;
out_free:
reg_free_request(reg_request);
}
static bool reg_only_self_managed_wiphys(void)
{
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
bool self_managed_found = false;
ASSERT_RTNL();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
wiphy = &rdev->wiphy;
if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED)
self_managed_found = true;
else
return false;
}
/* make sure at least one self-managed wiphy exists */
return self_managed_found;
}
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
/*
* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_*
* Regulatory hints come on a first come first serve basis and we
* must process each one atomically.
*/
static void reg_process_pending_hints(void)
{
struct regulatory_request *reg_request, *lr;
lr = get_last_request();
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
/* When last_request->processed becomes true this will be rescheduled */
if (lr && !lr->processed) {
reg_process_hint(lr);
return;
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
}
spin_lock(&reg_requests_lock);
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
if (list_empty(&reg_requests_list)) {
spin_unlock(&reg_requests_lock);
return;
}
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
reg_request = list_first_entry(&reg_requests_list,
struct regulatory_request,
list);
list_del_init(&reg_request->list);
spin_unlock(&reg_requests_lock);
if (reg_only_self_managed_wiphys()) {
reg_free_request(reg_request);
return;
}
reg_process_hint(reg_request);
lr = get_last_request();
spin_lock(&reg_requests_lock);
if (!list_empty(&reg_requests_list) && lr && lr->processed)
schedule_work(&reg_work);
spin_unlock(&reg_requests_lock);
}
/* Processes beacon hints -- this has nothing to do with country IEs */
static void reg_process_pending_beacon_hints(void)
{
struct cfg80211_registered_device *rdev;
struct reg_beacon *pending_beacon, *tmp;
/* This goes through the _pending_ beacon list */
spin_lock_bh(&reg_pending_beacons_lock);
list_for_each_entry_safe(pending_beacon, tmp,
&reg_pending_beacons, list) {
list_del_init(&pending_beacon->list);
/* Applies the beacon hint to current wiphys */
list_for_each_entry(rdev, &cfg80211_rdev_list, list)
wiphy_update_new_beacon(&rdev->wiphy, pending_beacon);
/* Remembers the beacon hint for new wiphys or reg changes */
list_add_tail(&pending_beacon->list, &reg_beacon_list);
}
spin_unlock_bh(&reg_pending_beacons_lock);
}
static void reg_process_self_managed_hints(void)
{
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
const struct ieee80211_regdomain *tmp;
const struct ieee80211_regdomain *regd;
enum nl80211_band band;
struct regulatory_request request = {};
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
wiphy = &rdev->wiphy;
spin_lock(&reg_requests_lock);
regd = rdev->requested_regd;
rdev->requested_regd = NULL;
spin_unlock(&reg_requests_lock);
if (regd == NULL)
continue;
tmp = get_wiphy_regdom(wiphy);
rcu_assign_pointer(wiphy->regd, regd);
rcu_free_regdom(tmp);
for (band = 0; band < NUM_NL80211_BANDS; band++)
handle_band_custom(wiphy, wiphy->bands[band], regd);
reg_process_ht_flags(wiphy);
request.wiphy_idx = get_wiphy_idx(wiphy);
request.alpha2[0] = regd->alpha2[0];
request.alpha2[1] = regd->alpha2[1];
request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
nl80211_send_wiphy_reg_change_event(&request);
}
reg_check_channels();
}
static void reg_todo(struct work_struct *work)
{
rtnl_lock();
reg_process_pending_hints();
reg_process_pending_beacon_hints();
reg_process_self_managed_hints();
rtnl_unlock();
}
static void queue_regulatory_request(struct regulatory_request *request)
{
request->alpha2[0] = toupper(request->alpha2[0]);
request->alpha2[1] = toupper(request->alpha2[1]);
spin_lock(&reg_requests_lock);
list_add_tail(&request->list, &reg_requests_list);
spin_unlock(&reg_requests_lock);
schedule_work(&reg_work);
}
/*
* Core regulatory hint -- happens during cfg80211_init()
* and when we restore regulatory settings.
*/
static int regulatory_hint_core(const char *alpha2)
{
struct regulatory_request *request;
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_CORE;
queue_regulatory_request(request);
return 0;
}
/* User hints */
int regulatory_hint_user(const char *alpha2,
enum nl80211_user_reg_hint_type user_reg_hint_type)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
struct regulatory_request *request;
if (WARN_ON(!alpha2))
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->wiphy_idx = WIPHY_IDX_INVALID;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_USER;
request->user_reg_hint_type = user_reg_hint_type;
/* Allow calling CRDA again */
reset_crda_timeouts();
queue_regulatory_request(request);
return 0;
}
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
int regulatory_hint_indoor(bool is_indoor, u32 portid)
{
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
spin_lock(&reg_indoor_lock);
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
/* It is possible that more than one user space process is trying to
* configure the indoor setting. To handle such cases, clear the indoor
* setting in case that some process does not think that the device
* is operating in an indoor environment. In addition, if a user space
* process indicates that it is controlling the indoor setting, save its
* portid, i.e., make it the owner.
*/
reg_is_indoor = is_indoor;
if (reg_is_indoor) {
if (!reg_is_indoor_portid)
reg_is_indoor_portid = portid;
} else {
reg_is_indoor_portid = 0;
}
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
spin_unlock(&reg_indoor_lock);
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
if (!is_indoor)
reg_check_channels();
return 0;
}
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
void regulatory_netlink_notify(u32 portid)
{
spin_lock(&reg_indoor_lock);
if (reg_is_indoor_portid != portid) {
spin_unlock(&reg_indoor_lock);
return;
}
reg_is_indoor = false;
reg_is_indoor_portid = 0;
spin_unlock(&reg_indoor_lock);
reg_check_channels();
}
/* Driver hints */
int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
{
struct regulatory_request *request;
if (WARN_ON(!alpha2 || !wiphy))
return -EINVAL;
wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
if (!request)
return -ENOMEM;
request->wiphy_idx = get_wiphy_idx(wiphy);
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_DRIVER;
/* Allow calling CRDA again */
reset_crda_timeouts();
queue_regulatory_request(request);
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
EXPORT_SYMBOL(regulatory_hint);
void regulatory_hint_country_ie(struct wiphy *wiphy, enum nl80211_band band,
const u8 *country_ie, u8 country_ie_len)
{
char alpha2[2];
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
return;
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (!request)
return;
alpha2[0] = country_ie[0];
alpha2[1] = country_ie[1];
if (country_ie[2] == 'I')
env = ENVIRON_INDOOR;
else if (country_ie[2] == 'O')
env = ENVIRON_OUTDOOR;
rcu_read_lock();
lr = get_last_request();
if (unlikely(!lr))
goto out;
/*
* We will run this only upon a successful connection on cfg80211.
* We leave conflict resolution to the workqueue, where can hold
* the RTNL.
*/
if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
lr->wiphy_idx != WIPHY_IDX_INVALID)
goto out;
request->wiphy_idx = get_wiphy_idx(wiphy);
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE;
request->country_ie_env = env;
/* Allow calling CRDA again */
reset_crda_timeouts();
queue_regulatory_request(request);
request = NULL;
out:
kfree(request);
rcu_read_unlock();
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
static void restore_alpha2(char *alpha2, bool reset_user)
{
/* indicates there is no alpha2 to consider for restoration */
alpha2[0] = '9';
alpha2[1] = '7';
/* The user setting has precedence over the module parameter */
if (is_user_regdom_saved()) {
/* Unless we're asked to ignore it and reset it */
if (reset_user) {
pr_debug("Restoring regulatory settings including user preference\n");
user_alpha2[0] = '9';
user_alpha2[1] = '7';
/*
* If we're ignoring user settings, we still need to
* check the module parameter to ensure we put things
* back as they were for a full restore.
*/
if (!is_world_regdom(ieee80211_regdom)) {
pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n",
ieee80211_regdom[0], ieee80211_regdom[1]);
alpha2[0] = ieee80211_regdom[0];
alpha2[1] = ieee80211_regdom[1];
}
} else {
pr_debug("Restoring regulatory settings while preserving user preference for: %c%c\n",
user_alpha2[0], user_alpha2[1]);
alpha2[0] = user_alpha2[0];
alpha2[1] = user_alpha2[1];
}
} else if (!is_world_regdom(ieee80211_regdom)) {
pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n",
ieee80211_regdom[0], ieee80211_regdom[1]);
alpha2[0] = ieee80211_regdom[0];
alpha2[1] = ieee80211_regdom[1];
} else
pr_debug("Restoring regulatory settings\n");
}
static void restore_custom_reg_settings(struct wiphy *wiphy)
{
struct ieee80211_supported_band *sband;
enum nl80211_band band;
struct ieee80211_channel *chan;
int i;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
sband = wiphy->bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
chan->flags = chan->orig_flags;
chan->max_antenna_gain = chan->orig_mag;
chan->max_power = chan->orig_mpwr;
chan->beacon_found = false;
}
}
}
/*
* Restoring regulatory settings involves ingoring any
* possibly stale country IE information and user regulatory
* settings if so desired, this includes any beacon hints
* learned as we could have traveled outside to another country
* after disconnection. To restore regulatory settings we do
* exactly what we did at bootup:
*
* - send a core regulatory hint
* - send a user regulatory hint if applicable
*
* Device drivers that send a regulatory hint for a specific country
* keep their own regulatory domain on wiphy->regd so that does does
* not need to be remembered.
*/
static void restore_regulatory_settings(bool reset_user)
{
char alpha2[2];
char world_alpha2[2];
struct reg_beacon *reg_beacon, *btmp;
LIST_HEAD(tmp_reg_req_list);
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
/*
* Clear the indoor setting in case that it is not controlled by user
* space, as otherwise there is no guarantee that the device is still
* operating in an indoor environment.
*/
spin_lock(&reg_indoor_lock);
if (reg_is_indoor && !reg_is_indoor_portid) {
reg_is_indoor = false;
reg_check_channels();
}
spin_unlock(&reg_indoor_lock);
reset_regdomains(true, &world_regdom);
restore_alpha2(alpha2, reset_user);
/*
* If there's any pending requests we simply
* stash them to a temporary pending queue and
* add then after we've restored regulatory
* settings.
*/
spin_lock(&reg_requests_lock);
list_splice_tail_init(&reg_requests_list, &tmp_reg_req_list);
spin_unlock(&reg_requests_lock);
/* Clear beacon hints */
spin_lock_bh(&reg_pending_beacons_lock);
list_for_each_entry_safe(reg_beacon, btmp, &reg_pending_beacons, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
spin_unlock_bh(&reg_pending_beacons_lock);
list_for_each_entry_safe(reg_beacon, btmp, &reg_beacon_list, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
/* First restore to the basic regulatory settings */
world_alpha2[0] = cfg80211_world_regdom->alpha2[0];
world_alpha2[1] = cfg80211_world_regdom->alpha2[1];
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED)
continue;
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG)
restore_custom_reg_settings(&rdev->wiphy);
}
regulatory_hint_core(world_alpha2);
/*
* This restores the ieee80211_regdom module parameter
* preference or the last user requested regulatory
* settings, user regulatory settings takes precedence.
*/
if (is_an_alpha2(alpha2))
regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER);
spin_lock(&reg_requests_lock);
list_splice_tail_init(&tmp_reg_req_list, &reg_requests_list);
spin_unlock(&reg_requests_lock);
pr_debug("Kicking the queue\n");
schedule_work(&reg_work);
}
void regulatory_hint_disconnect(void)
{
pr_debug("All devices are disconnected, going to restore regulatory settings\n");
restore_regulatory_settings(false);
}
static bool freq_is_chan_12_13_14(u16 freq)
{
if (freq == ieee80211_channel_to_frequency(12, NL80211_BAND_2GHZ) ||
freq == ieee80211_channel_to_frequency(13, NL80211_BAND_2GHZ) ||
freq == ieee80211_channel_to_frequency(14, NL80211_BAND_2GHZ))
return true;
return false;
}
static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan)
{
struct reg_beacon *pending_beacon;
list_for_each_entry(pending_beacon, &reg_pending_beacons, list)
if (beacon_chan->center_freq ==
pending_beacon->chan.center_freq)
return true;
return false;
}
int regulatory_hint_found_beacon(struct wiphy *wiphy,
struct ieee80211_channel *beacon_chan,
gfp_t gfp)
{
struct reg_beacon *reg_beacon;
bool processing;
if (beacon_chan->beacon_found ||
beacon_chan->flags & IEEE80211_CHAN_RADAR ||
(beacon_chan->band == NL80211_BAND_2GHZ &&
!freq_is_chan_12_13_14(beacon_chan->center_freq)))
return 0;
spin_lock_bh(&reg_pending_beacons_lock);
processing = pending_reg_beacon(beacon_chan);
spin_unlock_bh(&reg_pending_beacons_lock);
if (processing)
return 0;
reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp);
if (!reg_beacon)
return -ENOMEM;
pr_debug("Found new beacon on frequency: %d MHz (Ch %d) on %s\n",
beacon_chan->center_freq,
ieee80211_frequency_to_channel(beacon_chan->center_freq),
wiphy_name(wiphy));
memcpy(&reg_beacon->chan, beacon_chan,
sizeof(struct ieee80211_channel));
/*
* Since we can be called from BH or and non-BH context
* we must use spin_lock_bh()
*/
spin_lock_bh(&reg_pending_beacons_lock);
list_add_tail(&reg_beacon->list, &reg_pending_beacons);
spin_unlock_bh(&reg_pending_beacons_lock);
schedule_work(&reg_work);
return 0;
}
static void print_rd_rules(const struct ieee80211_regdomain *rd)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
unsigned int i;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_freq_range *freq_range = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
char bw[32], cac_time[32];
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
pr_debug(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n");
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
for (i = 0; i < rd->n_reg_rules; i++) {
reg_rule = &rd->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
freq_range->max_bandwidth_khz,
reg_get_max_bandwidth(rd, reg_rule));
else
snprintf(bw, sizeof(bw), "%d KHz",
freq_range->max_bandwidth_khz);
if (reg_rule->flags & NL80211_RRF_DFS)
scnprintf(cac_time, sizeof(cac_time), "%u s",
reg_rule->dfs_cac_ms/1000);
else
scnprintf(cac_time, sizeof(cac_time), "N/A");
/*
* There may not be documentation for max antenna gain
* in certain regions
*/
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (power_rule->max_antenna_gain)
pr_debug(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n",
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
freq_range->start_freq_khz,
freq_range->end_freq_khz,
bw,
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
power_rule->max_antenna_gain,
power_rule->max_eirp,
cac_time);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
else
pr_debug(" (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n",
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
freq_range->start_freq_khz,
freq_range->end_freq_khz,
bw,
power_rule->max_eirp,
cac_time);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
}
bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region)
{
switch (dfs_region) {
case NL80211_DFS_UNSET:
case NL80211_DFS_FCC:
case NL80211_DFS_ETSI:
case NL80211_DFS_JP:
return true;
default:
pr_debug("Ignoring uknown DFS master region: %d\n", dfs_region);
return false;
}
}
static void print_regdomain(const struct ieee80211_regdomain *rd)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
struct regulatory_request *lr = get_last_request();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (is_intersected_alpha2(rd->alpha2)) {
if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
struct cfg80211_registered_device *rdev;
rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx);
if (rdev) {
pr_debug("Current regulatory domain updated by AP to: %c%c\n",
rdev->country_ie_alpha2[0],
rdev->country_ie_alpha2[1]);
} else
pr_debug("Current regulatory domain intersected:\n");
} else
pr_debug("Current regulatory domain intersected:\n");
} else if (is_world_regdom(rd->alpha2)) {
pr_debug("World regulatory domain updated:\n");
} else {
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (is_unknown_alpha2(rd->alpha2))
pr_debug("Regulatory domain changed to driver built-in settings (unknown country)\n");
else {
if (reg_request_cell_base(lr))
pr_debug("Regulatory domain changed to country: %c%c by Cell Station\n",
rd->alpha2[0], rd->alpha2[1]);
else
pr_debug("Regulatory domain changed to country: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
pr_debug(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region));
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
print_rd_rules(rd);
}
static void print_regdomain_info(const struct ieee80211_regdomain *rd)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
pr_debug("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
print_rd_rules(rd);
}
static int reg_set_rd_core(const struct ieee80211_regdomain *rd)
{
if (!is_world_regdom(rd->alpha2))
return -EINVAL;
update_world_regdomain(rd);
return 0;
}
static int reg_set_rd_user(const struct ieee80211_regdomain *rd,
struct regulatory_request *user_request)
{
const struct ieee80211_regdomain *intersected_rd = NULL;
if (!regdom_changes(rd->alpha2))
return -EALREADY;
if (!is_valid_rd(rd)) {
pr_err("Invalid regulatory domain detected: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
print_regdomain_info(rd);
return -EINVAL;
}
if (!user_request->intersect) {
reset_regdomains(false, rd);
return 0;
}
intersected_rd = regdom_intersect(rd, get_cfg80211_regdom());
if (!intersected_rd)
return -EINVAL;
kfree(rd);
rd = NULL;
reset_regdomains(false, intersected_rd);
return 0;
}
static int reg_set_rd_driver(const struct ieee80211_regdomain *rd,
struct regulatory_request *driver_request)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
const struct ieee80211_regdomain *regd;
const struct ieee80211_regdomain *intersected_rd = NULL;
const struct ieee80211_regdomain *tmp;
struct wiphy *request_wiphy;
if (is_world_regdom(rd->alpha2))
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return -EINVAL;
if (!regdom_changes(rd->alpha2))
return -EALREADY;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (!is_valid_rd(rd)) {
pr_err("Invalid regulatory domain detected: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
print_regdomain_info(rd);
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
request_wiphy = wiphy_idx_to_wiphy(driver_request->wiphy_idx);
if (!request_wiphy)
return -ENODEV;
if (!driver_request->intersect) {
cfg80211: fix for duplicate response for driver reg request As Pavel puts userspace can be stupid and should not cause kernel crashes. In this case Pavel was able to find a crash here but unable to reproduce. Either way lets deal with this. This should fix: ------------[ cut here ]------------ kernel BUG at /home/proski/src/linux-2.6/net/wireless/reg.c:2132! Oops: Exception in kernel mode, sig: 5 [#1] PowerMac Modules linked in: ath5k ath [last unloaded: scsi_wait_scan] NIP: c02f3eac LR: c02f3d08 CTR: 00000000 REGS: ef107aa0 TRAP: 0700 Not tainted (2.6.30-rc8-wl) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 88002442 XER: 20000000 TASK = ef84acb0[834] 'crda' THREAD: ef106000 GPR00: ef953840 ef107b50 ef84acb0 ef1380bc 00000006 c035a5c8 ef107b90 c035a5c8 GPR08: 00080005 efb68980 c0445628 ef130004 28002422 10019ce0 10012d3c 00000001 GPR16: 1070b2ac 00000005 48023558 1070b380 4802304c 00000000 ef107ddc c035a5c8 GPR24: ef107b78 c0443350 ef8bcb00 00000005 ef138080 c04a6a70 c04a0000 ef8bcb00 NIP [c02f3eac] set_regdom+0x4c4/0x4ec LR [c02f3d08] set_regdom+0x320/0x4ec Call Trace: [ef107b50] [c02f3d08] set_regdom+0x320/0x4ec (unreliable) [ef107b70] [c02f9d10] nl80211_set_reg+0x140/0x2d0 [ef107bc0] [c02aa2b8] genl_rcv_msg+0x204/0x228 [ef107c10] [c02a97cc] netlink_rcv_skb+0xe8/0x10c [ef107c30] [c02aa094] genl_rcv+0x3c/0x5c [ef107c40] [c02a9050] netlink_unicast+0x308/0x36c [ef107c80] [c02a92bc] netlink_sendmsg+0x208/0x2f0 [ef107cd0] [c0282048] sock_sendmsg+0xac/0xe4 [ef107db0] [c02822b4] sys_sendmsg+0x234/0x2d8 [ef107f00] [c0283a88] sys_socketcall+0x108/0x258 [ef107f40] [c0012790] ret_from_syscall+0x0/0x38 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-09 09:54:37 +08:00
if (request_wiphy->regd)
return -EALREADY;
regd = reg_copy_regd(rd);
if (IS_ERR(regd))
return PTR_ERR(regd);
rcu_assign_pointer(request_wiphy->regd, regd);
reset_regdomains(false, rd);
return 0;
}
intersected_rd = regdom_intersect(rd, get_cfg80211_regdom());
if (!intersected_rd)
return -EINVAL;
/*
* We can trash what CRDA provided now.
* However if a driver requested this specific regulatory
* domain we keep it for its private use
*/
tmp = get_wiphy_regdom(request_wiphy);
rcu_assign_pointer(request_wiphy->regd, rd);
rcu_free_regdom(tmp);
rd = NULL;
reset_regdomains(false, intersected_rd);
return 0;
}
static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd,
struct regulatory_request *country_ie_request)
{
struct wiphy *request_wiphy;
if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) &&
!is_unknown_alpha2(rd->alpha2))
return -EINVAL;
/*
* Lets only bother proceeding on the same alpha2 if the current
* rd is non static (it means CRDA was present and was used last)
* and the pending request came in from a country IE
*/
if (!is_valid_rd(rd)) {
pr_err("Invalid regulatory domain detected: %c%c\n",
rd->alpha2[0], rd->alpha2[1]);
print_regdomain_info(rd);
return -EINVAL;
}
request_wiphy = wiphy_idx_to_wiphy(country_ie_request->wiphy_idx);
if (!request_wiphy)
return -ENODEV;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
if (country_ie_request->intersect)
return -EINVAL;
reset_regdomains(false, rd);
return 0;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/*
* Use this call to set the current regulatory domain. Conflicts with
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
* multiple drivers can be ironed out later. Caller must've already
* kmalloc'd the rd structure.
*/
int set_regdom(const struct ieee80211_regdomain *rd,
enum ieee80211_regd_source regd_src)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
struct regulatory_request *lr;
bool user_reset = false;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
int r;
if (!reg_is_valid_request(rd->alpha2)) {
kfree(rd);
return -EINVAL;
}
if (regd_src == REGD_SOURCE_CRDA)
reset_crda_timeouts();
lr = get_last_request();
cfg80211: decouple regulatory variables from cfg80211_mutex We change regulatory code to be protected by its own regulatory mutex and alleviate cfg80211_mutex to only be used to protect cfg80211_rdev_list, the registered device list. By doing this we will be able to work on regulatory core components without having to have hog up the cfg80211_mutex. An example here is we no longer need to use the cfg80211_mutex during driver specific wiphy_apply_custom_regulatory(). We also no longer need it for the the country IE regulatory hint; by doing so we end up curing this new lockdep warning: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #12 ------------------------------------------------------- phy1/1709 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa00af852>] regulatory_hint_11d+0x32/0x3f0 [cfg80211] but task is already holding lock: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ifmgd->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa0141bb8>] ieee80211_mgd_auth+0x108/0x1f0 [mac80211] [<ffffffffa0148563>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffa00bc3a1>] __cfg80211_mlme_auth+0x1b1/0x2a0 [cfg80211] [<ffffffffa00bc516>] cfg80211_mlme_auth+0x86/0xc0 [cfg80211] [<ffffffffa00b368d>] nl80211_authenticate+0x21d/0x230 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #2 (&wdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ab304>] cfg80211_netdev_notifier_call+0x1a4/0x390 [cfg80211] [<ffffffff814f3dff>] notifier_call_chain+0x3f/0x80 [<ffffffff81075a91>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813f665a>] dev_open+0x10a/0x120 [<ffffffff813f59bd>] dev_change_flags+0x9d/0x1e0 [<ffffffff8144eb6e>] devinet_ioctl+0x6fe/0x760 [<ffffffff81450204>] inet_ioctl+0x94/0xc0 [<ffffffff813e25fa>] sock_ioctl+0x6a/0x290 [<ffffffff8111e911>] vfs_ioctl+0x31/0xa0 [<ffffffff8111ea9a>] do_vfs_ioctl+0x8a/0x5c0 [<ffffffff8111f069>] sys_ioctl+0x99/0xa0 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #1 (&rdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ac4d0>] cfg80211_get_dev_from_ifindex+0x60/0x90 [cfg80211] [<ffffffffa00b21ff>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa00b51eb>] nl80211_set_interface+0x3b/0x260 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff other info that might help us debug this: 3 locks held by phy1/1709: #0: ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #1: (&ifmgd->work){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] Reported-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-31 08:38:08 +08:00
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/* Note that this doesn't update the wiphys, this is done below */
switch (lr->initiator) {
case NL80211_REGDOM_SET_BY_CORE:
r = reg_set_rd_core(rd);
break;
case NL80211_REGDOM_SET_BY_USER:
r = reg_set_rd_user(rd, lr);
user_reset = true;
break;
case NL80211_REGDOM_SET_BY_DRIVER:
r = reg_set_rd_driver(rd, lr);
break;
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
r = reg_set_rd_country_ie(rd, lr);
break;
default:
WARN(1, "invalid initiator %d\n", lr->initiator);
kfree(rd);
return -EINVAL;
}
if (r) {
switch (r) {
case -EALREADY:
reg_set_request_processed();
break;
default:
/* Back to world regulatory in case of errors */
restore_regulatory_settings(user_reset);
}
kfree(rd);
return r;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/* This would make this whole thing pointless */
if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom()))
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
/* update all wiphys now with the new established regulatory domain */
update_all_wiphy_regulatory(lr->initiator);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
print_regdomain(get_cfg80211_regdom());
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
nl80211_send_reg_change_event(lr);
cfg80211: Fix regulatory bug with multiple cards and delays When two cards are connected with the same regulatory domain if CRDA had a delayed response then cfg80211's own set regulatory domain would still be the world regulatory domain. There was a bug on cfg80211's logic such that it assumed that once you pegged a request as the last request it was already the currently set regulatory domain. This would mean we would race setting a stale regulatory domain to secondary cards which had the same regulatory domain since the alpha2 would match. We fix this by processing each regulatory request atomically, and only move on to the next one once we get it fully processed. In the case CRDA is not present we will simply world roam. This issue is only present when you have a slow system and the CRDA processing is delayed. Because of this it is not a known regression. Without this fix when a delay is present with CRDA the second card would end up with an intersected regulatory domain and not allow it to use the channels it really is designed for. When two cards with two different regulatory domains were inserted you'd end up rejecting the second card's regulatory domain request. This fails with mac80211_hswim's regtest=2 (two requests, same alpha2) and regtest=3 (two requests, different alpha2) module parameter options. This was reproduced and tested against mac80211_hwsim using this CRDA delayer: #!/bin/bash echo $COUNTRY >> /tmp/log sleep 2 /sbin/crda.orig And these regulatory tests: modprobe mac80211_hwsim regtest=2 modprobe mac80211_hwsim regtest=3 Reported-by: Mark Mentovai <mark@moxienet.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Mark Mentovai <mark@moxienet.com> Tested-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18 13:46:09 +08:00
reg_set_request_processed();
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
}
static int __regulatory_set_wiphy_regd(struct wiphy *wiphy,
struct ieee80211_regdomain *rd)
{
const struct ieee80211_regdomain *regd;
const struct ieee80211_regdomain *prev_regd;
struct cfg80211_registered_device *rdev;
if (WARN_ON(!wiphy || !rd))
return -EINVAL;
if (WARN(!(wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED),
"wiphy should have REGULATORY_WIPHY_SELF_MANAGED\n"))
return -EPERM;
if (WARN(!is_valid_rd(rd), "Invalid regulatory domain detected\n")) {
print_regdomain_info(rd);
return -EINVAL;
}
regd = reg_copy_regd(rd);
if (IS_ERR(regd))
return PTR_ERR(regd);
rdev = wiphy_to_rdev(wiphy);
spin_lock(&reg_requests_lock);
prev_regd = rdev->requested_regd;
rdev->requested_regd = regd;
spin_unlock(&reg_requests_lock);
kfree(prev_regd);
return 0;
}
int regulatory_set_wiphy_regd(struct wiphy *wiphy,
struct ieee80211_regdomain *rd)
{
int ret = __regulatory_set_wiphy_regd(wiphy, rd);
if (ret)
return ret;
schedule_work(&reg_work);
return 0;
}
EXPORT_SYMBOL(regulatory_set_wiphy_regd);
int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy,
struct ieee80211_regdomain *rd)
{
int ret;
ASSERT_RTNL();
ret = __regulatory_set_wiphy_regd(wiphy, rd);
if (ret)
return ret;
/* process the request immediately */
reg_process_self_managed_hints();
return 0;
}
EXPORT_SYMBOL(regulatory_set_wiphy_regd_sync_rtnl);
void wiphy_regulatory_register(struct wiphy *wiphy)
{
struct regulatory_request *lr;
/* self-managed devices ignore external hints */
if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED)
wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS |
REGULATORY_COUNTRY_IE_IGNORE;
if (!reg_dev_ignore_cell_hint(wiphy))
reg_num_devs_support_basehint++;
lr = get_last_request();
wiphy_update_regulatory(wiphy, lr->initiator);
wiphy_all_share_dfs_chan_state(wiphy);
}
void wiphy_regulatory_deregister(struct wiphy *wiphy)
{
struct wiphy *request_wiphy = NULL;
struct regulatory_request *lr;
lr = get_last_request();
cfg80211: decouple regulatory variables from cfg80211_mutex We change regulatory code to be protected by its own regulatory mutex and alleviate cfg80211_mutex to only be used to protect cfg80211_rdev_list, the registered device list. By doing this we will be able to work on regulatory core components without having to have hog up the cfg80211_mutex. An example here is we no longer need to use the cfg80211_mutex during driver specific wiphy_apply_custom_regulatory(). We also no longer need it for the the country IE regulatory hint; by doing so we end up curing this new lockdep warning: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #12 ------------------------------------------------------- phy1/1709 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa00af852>] regulatory_hint_11d+0x32/0x3f0 [cfg80211] but task is already holding lock: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ifmgd->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa0141bb8>] ieee80211_mgd_auth+0x108/0x1f0 [mac80211] [<ffffffffa0148563>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffa00bc3a1>] __cfg80211_mlme_auth+0x1b1/0x2a0 [cfg80211] [<ffffffffa00bc516>] cfg80211_mlme_auth+0x86/0xc0 [cfg80211] [<ffffffffa00b368d>] nl80211_authenticate+0x21d/0x230 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #2 (&wdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ab304>] cfg80211_netdev_notifier_call+0x1a4/0x390 [cfg80211] [<ffffffff814f3dff>] notifier_call_chain+0x3f/0x80 [<ffffffff81075a91>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813f665a>] dev_open+0x10a/0x120 [<ffffffff813f59bd>] dev_change_flags+0x9d/0x1e0 [<ffffffff8144eb6e>] devinet_ioctl+0x6fe/0x760 [<ffffffff81450204>] inet_ioctl+0x94/0xc0 [<ffffffff813e25fa>] sock_ioctl+0x6a/0x290 [<ffffffff8111e911>] vfs_ioctl+0x31/0xa0 [<ffffffff8111ea9a>] do_vfs_ioctl+0x8a/0x5c0 [<ffffffff8111f069>] sys_ioctl+0x99/0xa0 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #1 (&rdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ac4d0>] cfg80211_get_dev_from_ifindex+0x60/0x90 [cfg80211] [<ffffffffa00b21ff>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa00b51eb>] nl80211_set_interface+0x3b/0x260 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff other info that might help us debug this: 3 locks held by phy1/1709: #0: ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #1: (&ifmgd->work){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] Reported-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-31 08:38:08 +08:00
if (!reg_dev_ignore_cell_hint(wiphy))
reg_num_devs_support_basehint--;
rcu_free_regdom(get_wiphy_regdom(wiphy));
RCU_INIT_POINTER(wiphy->regd, NULL);
if (lr)
request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
if (!request_wiphy || request_wiphy != wiphy)
return;
lr->wiphy_idx = WIPHY_IDX_INVALID;
lr->country_ie_env = ENVIRON_ANY;
}
/*
* See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for
* UNII band definitions
*/
int cfg80211_get_unii(int freq)
{
/* UNII-1 */
if (freq >= 5150 && freq <= 5250)
return 0;
/* UNII-2A */
if (freq > 5250 && freq <= 5350)
return 1;
/* UNII-2B */
if (freq > 5350 && freq <= 5470)
return 2;
/* UNII-2C */
if (freq > 5470 && freq <= 5725)
return 3;
/* UNII-3 */
if (freq > 5725 && freq <= 5825)
return 4;
return -EINVAL;
}
bool regulatory_indoor_allowed(void)
{
return reg_is_indoor;
}
bool regulatory_pre_cac_allowed(struct wiphy *wiphy)
{
const struct ieee80211_regdomain *regd = NULL;
const struct ieee80211_regdomain *wiphy_regd = NULL;
bool pre_cac_allowed = false;
rcu_read_lock();
regd = rcu_dereference(cfg80211_regdomain);
wiphy_regd = rcu_dereference(wiphy->regd);
if (!wiphy_regd) {
if (regd->dfs_region == NL80211_DFS_ETSI)
pre_cac_allowed = true;
rcu_read_unlock();
return pre_cac_allowed;
}
if (regd->dfs_region == wiphy_regd->dfs_region &&
wiphy_regd->dfs_region == NL80211_DFS_ETSI)
pre_cac_allowed = true;
rcu_read_unlock();
return pre_cac_allowed;
}
void regulatory_propagate_dfs_state(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
enum nl80211_dfs_state dfs_state,
enum nl80211_radar_event event)
{
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
if (WARN_ON(!cfg80211_chandef_valid(chandef)))
return;
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (wiphy == &rdev->wiphy)
continue;
if (!reg_dfs_domain_same(wiphy, &rdev->wiphy))
continue;
if (!ieee80211_get_channel(&rdev->wiphy,
chandef->chan->center_freq))
continue;
cfg80211_set_dfs_state(&rdev->wiphy, chandef, dfs_state);
if (event == NL80211_RADAR_DETECTED ||
event == NL80211_RADAR_CAC_FINISHED)
cfg80211_sched_dfs_chan_update(rdev);
nl80211_radar_notify(rdev, chandef, event, NULL, GFP_KERNEL);
}
}
int __init regulatory_init(void)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
int err = 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0);
if (IS_ERR(reg_pdev))
return PTR_ERR(reg_pdev);
spin_lock_init(&reg_requests_lock);
spin_lock_init(&reg_pending_beacons_lock);
cfg80211: Add API to change the indoor regulatory setting Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 13:32:06 +08:00
spin_lock_init(&reg_indoor_lock);
cfg80211: warn if db.txt is empty with CONFIG_CFG80211_INTERNAL_REGDB It has happened twice now where elaborate troubleshooting has undergone on systems where CONFIG_CFG80211_INTERNAL_REGDB [0] has been set but yet net/wireless/db.txt was not updated. Despite the documentation on this it seems system integrators could use some more help with this, so throw out a kernel warning at boot time when their database is empty. This does mean that the error-prone system integrator won't likely realize the issue until they boot the machine but -- it does not seem to make sense to enable a build bug breaking random build testing. [0] http://wireless.kernel.org/en/developers/Regulatory/CRDA#CONFIG_CFG80211_INTERNAL_REGDB Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Youngsin Lee <youngsin@qualcomm.com> Cc: Raja Mani <rmani@qca.qualcomm.com> Cc: Senthil Kumar Balasubramanian <senthilb@qca.qualcomm.com> Cc: Vipin Mehta <vipimeht@qca.qualcomm.com> Cc: yahuan@qca.qualcomm.com Cc: jjan@qca.qualcomm.com Cc: vthiagar@qca.qualcomm.com Cc: henrykim@qualcomm.com Cc: jouni@qca.qualcomm.com Cc: athiruve@qca.qualcomm.com Cc: cjkim@qualcomm.com Cc: philipk@qca.qualcomm.com Cc: sunnykim@qualcomm.com Cc: sskwak@qualcomm.com Cc: kkim@qualcomm.com Cc: mattbyun@qualcomm.com Cc: ryanlee@qualcomm.com Cc: simbap@qualcomm.com Cc: krislee@qualcomm.com Cc: conner@qualcomm.com Cc: hojinkim@qualcomm.com Cc: honglee@qualcomm.com Cc: johnwkim@qualcomm.com Cc: jinyong@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-23 22:23:31 +08:00
reg_regdb_size_check();
rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom);
user_alpha2[0] = '9';
user_alpha2[1] = '7';
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
if (err) {
if (err == -ENOMEM) {
platform_device_unregister(reg_pdev);
return err;
}
/*
* N.B. kobject_uevent_env() can fail mainly for when we're out
* memory which is handled and propagated appropriately above
* but it can also fail during a netlink_broadcast() or during
* early boot for call_usermodehelper(). For now treat these
* errors as non-fatal.
*/
pr_err("kobject_uevent_env() was unable to call CRDA during init\n");
}
/*
* Finally, if the user set the module parameter treat it
* as a user hint.
*/
if (!is_world_regdom(ieee80211_regdom))
regulatory_hint_user(ieee80211_regdom,
NL80211_USER_REG_HINT_USER);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
return 0;
}
void regulatory_exit(void)
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
{
struct regulatory_request *reg_request, *tmp;
struct reg_beacon *reg_beacon, *btmp;
cancel_work_sync(&reg_work);
cancel_crda_timeout_sync();
cancel_delayed_work_sync(&reg_check_chans);
/* Lock to suppress warnings */
rtnl_lock();
reset_regdomains(true, NULL);
rtnl_unlock();
cfg80211: fix bug on regulatory core exit on access to last_request Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[<ffffffffa030df9a>] [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81305307>] ? devres_release_all+0x27/0x60 [<ffffffff8124206b>] kobject_uevent+0xb/0x10 [<ffffffff812fee27>] device_del+0x157/0x1b0 [<ffffffff8130377d>] platform_device_del+0x1d/0x90 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211] [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211] [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b Code: <all your base are belong to me> RIP [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP <ffff88001c5f9d58> CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Scott James Remnant <keybuk@google.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09 06:28:06 +08:00
dev_set_uevent_suppress(&reg_pdev->dev, true);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
platform_device_unregister(reg_pdev);
list_for_each_entry_safe(reg_beacon, btmp, &reg_pending_beacons, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
list_for_each_entry_safe(reg_beacon, btmp, &reg_beacon_list, list) {
list_del(&reg_beacon->list);
kfree(reg_beacon);
}
list_for_each_entry_safe(reg_request, tmp, &reg_requests_list, list) {
list_del(&reg_request->list);
kfree(reg_request);
}
}