OpenCloudOS-Kernel/drivers/net/ethernet/cavium/liquidio/octeon_droq.c

1015 lines
26 KiB
C
Raw Normal View History

Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2016 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more details.
***********************************************************************/
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
#include <linux/pci.h>
#include <linux/netdevice.h>
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
#include <linux/vmalloc.h>
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "octeon_main.h"
#include "octeon_network.h"
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "cn23xx_pf_device.h"
#include "cn23xx_vf_device.h"
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
struct niclist {
struct list_head list;
void *ptr;
};
struct __dispatch {
struct list_head list;
struct octeon_recv_info *rinfo;
octeon_dispatch_fn_t disp_fn;
};
/** Get the argument that the user set when registering dispatch
* function for a given opcode/subcode.
* @param octeon_dev - the octeon device pointer.
* @param opcode - the opcode for which the dispatch argument
* is to be checked.
* @param subcode - the subcode for which the dispatch argument
* is to be checked.
* @return Success: void * (argument to the dispatch function)
* @return Failure: NULL
*
*/
static inline void *octeon_get_dispatch_arg(struct octeon_device *octeon_dev,
u16 opcode, u16 subcode)
{
int idx;
struct list_head *dispatch;
void *fn_arg = NULL;
u16 combined_opcode = OPCODE_SUBCODE(opcode, subcode);
idx = combined_opcode & OCTEON_OPCODE_MASK;
spin_lock_bh(&octeon_dev->dispatch.lock);
if (octeon_dev->dispatch.count == 0) {
spin_unlock_bh(&octeon_dev->dispatch.lock);
return NULL;
}
if (octeon_dev->dispatch.dlist[idx].opcode == combined_opcode) {
fn_arg = octeon_dev->dispatch.dlist[idx].arg;
} else {
list_for_each(dispatch,
&octeon_dev->dispatch.dlist[idx].list) {
if (((struct octeon_dispatch *)dispatch)->opcode ==
combined_opcode) {
fn_arg = ((struct octeon_dispatch *)
dispatch)->arg;
break;
}
}
}
spin_unlock_bh(&octeon_dev->dispatch.lock);
return fn_arg;
}
/** Check for packets on Droq. This function should be called with lock held.
* @param droq - Droq on which count is checked.
* @return Returns packet count.
*/
u32 octeon_droq_check_hw_for_pkts(struct octeon_droq *droq)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
{
u32 pkt_count = 0;
u32 last_count;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
pkt_count = readl(droq->pkts_sent_reg);
last_count = pkt_count - droq->pkt_count;
droq->pkt_count = pkt_count;
/* we shall write to cnts at napi irq enable or end of droq tasklet */
if (last_count)
atomic_add(last_count, &droq->pkts_pending);
return last_count;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
static void octeon_droq_compute_max_packet_bufs(struct octeon_droq *droq)
{
u32 count = 0;
/* max_empty_descs is the max. no. of descs that can have no buffers.
* If the empty desc count goes beyond this value, we cannot safely
* read in a 64K packet sent by Octeon
* (64K is max pkt size from Octeon)
*/
droq->max_empty_descs = 0;
do {
droq->max_empty_descs++;
count += droq->buffer_size;
} while (count < (64 * 1024));
droq->max_empty_descs = droq->max_count - droq->max_empty_descs;
}
static void octeon_droq_reset_indices(struct octeon_droq *droq)
{
droq->read_idx = 0;
droq->write_idx = 0;
droq->refill_idx = 0;
droq->refill_count = 0;
atomic_set(&droq->pkts_pending, 0);
}
static void
octeon_droq_destroy_ring_buffers(struct octeon_device *oct,
struct octeon_droq *droq)
{
u32 i;
struct octeon_skb_page_info *pg_info;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
for (i = 0; i < droq->max_count; i++) {
pg_info = &droq->recv_buf_list[i].pg_info;
if (pg_info->dma)
lio_unmap_ring(oct->pci_dev,
(u64)pg_info->dma);
pg_info->dma = 0;
if (pg_info->page)
recv_buffer_destroy(droq->recv_buf_list[i].buffer,
pg_info);
droq->recv_buf_list[i].buffer = NULL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
octeon_droq_reset_indices(droq);
}
static int
octeon_droq_setup_ring_buffers(struct octeon_device *oct,
struct octeon_droq *droq)
{
u32 i;
void *buf;
struct octeon_droq_desc *desc_ring = droq->desc_ring;
for (i = 0; i < droq->max_count; i++) {
buf = recv_buffer_alloc(oct, &droq->recv_buf_list[i].pg_info);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (!buf) {
dev_err(&oct->pci_dev->dev, "%s buffer alloc failed\n",
__func__);
droq->stats.rx_alloc_failure++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return -ENOMEM;
}
droq->recv_buf_list[i].buffer = buf;
droq->recv_buf_list[i].data = get_rbd(buf);
desc_ring[i].info_ptr = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
desc_ring[i].buffer_ptr =
lio_map_ring(droq->recv_buf_list[i].buffer);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
octeon_droq_reset_indices(droq);
octeon_droq_compute_max_packet_bufs(droq);
return 0;
}
int octeon_delete_droq(struct octeon_device *oct, u32 q_no)
{
struct octeon_droq *droq = oct->droq[q_no];
dev_dbg(&oct->pci_dev->dev, "%s[%d]\n", __func__, q_no);
octeon_droq_destroy_ring_buffers(oct, droq);
vfree(droq->recv_buf_list);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (droq->desc_ring)
lio_dma_free(oct, (droq->max_count * OCT_DROQ_DESC_SIZE),
droq->desc_ring, droq->desc_ring_dma);
memset(droq, 0, OCT_DROQ_SIZE);
return 0;
}
int octeon_init_droq(struct octeon_device *oct,
u32 q_no,
u32 num_descs,
u32 desc_size,
void *app_ctx)
{
struct octeon_droq *droq;
u32 desc_ring_size = 0, c_num_descs = 0, c_buf_size = 0;
u32 c_pkts_per_intr = 0, c_refill_threshold = 0;
int numa_node = dev_to_node(&oct->pci_dev->dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
dev_dbg(&oct->pci_dev->dev, "%s[%d]\n", __func__, q_no);
droq = oct->droq[q_no];
memset(droq, 0, OCT_DROQ_SIZE);
droq->oct_dev = oct;
droq->q_no = q_no;
if (app_ctx)
droq->app_ctx = app_ctx;
else
droq->app_ctx = (void *)(size_t)q_no;
c_num_descs = num_descs;
c_buf_size = desc_size;
if (OCTEON_CN6XXX(oct)) {
struct octeon_config *conf6x = CHIP_CONF(oct, cn6xxx);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf6x);
c_refill_threshold =
(u32)CFG_GET_OQ_REFILL_THRESHOLD(conf6x);
} else if (OCTEON_CN23XX_PF(oct)) {
struct octeon_config *conf23 = CHIP_CONF(oct, cn23xx_pf);
c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf23);
c_refill_threshold = (u32)CFG_GET_OQ_REFILL_THRESHOLD(conf23);
} else if (OCTEON_CN23XX_VF(oct)) {
struct octeon_config *conf23 = CHIP_CONF(oct, cn23xx_vf);
c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf23);
c_refill_threshold = (u32)CFG_GET_OQ_REFILL_THRESHOLD(conf23);
} else {
return 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
droq->max_count = c_num_descs;
droq->buffer_size = c_buf_size;
desc_ring_size = droq->max_count * OCT_DROQ_DESC_SIZE;
droq->desc_ring = lio_dma_alloc(oct, desc_ring_size,
(dma_addr_t *)&droq->desc_ring_dma);
if (!droq->desc_ring) {
dev_err(&oct->pci_dev->dev,
"Output queue %d ring alloc failed\n", q_no);
return 1;
}
dev_dbg(&oct->pci_dev->dev, "droq[%d]: desc_ring: virt: 0x%p, dma: %lx\n",
q_no, droq->desc_ring, droq->desc_ring_dma);
dev_dbg(&oct->pci_dev->dev, "droq[%d]: num_desc: %d\n", q_no,
droq->max_count);
droq->recv_buf_list = (struct octeon_recv_buffer *)
vmalloc_node(droq->max_count *
OCT_DROQ_RECVBUF_SIZE,
numa_node);
if (!droq->recv_buf_list)
droq->recv_buf_list = (struct octeon_recv_buffer *)
vmalloc(droq->max_count *
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
OCT_DROQ_RECVBUF_SIZE);
if (!droq->recv_buf_list) {
dev_err(&oct->pci_dev->dev, "Output queue recv buf list alloc failed\n");
goto init_droq_fail;
}
if (octeon_droq_setup_ring_buffers(oct, droq))
goto init_droq_fail;
droq->pkts_per_intr = c_pkts_per_intr;
droq->refill_threshold = c_refill_threshold;
dev_dbg(&oct->pci_dev->dev, "DROQ INIT: max_empty_descs: %d\n",
droq->max_empty_descs);
spin_lock_init(&droq->lock);
INIT_LIST_HEAD(&droq->dispatch_list);
/* For 56xx Pass1, this function won't be called, so no checks. */
oct->fn_list.setup_oq_regs(oct, q_no);
oct->io_qmask.oq |= BIT_ULL(q_no);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return 0;
init_droq_fail:
octeon_delete_droq(oct, q_no);
return 1;
}
/* octeon_create_recv_info
* Parameters:
* octeon_dev - pointer to the octeon device structure
* droq - droq in which the packet arrived.
* buf_cnt - no. of buffers used by the packet.
* idx - index in the descriptor for the first buffer in the packet.
* Description:
* Allocates a recv_info_t and copies the buffer addresses for packet data
* into the recv_pkt space which starts at an 8B offset from recv_info_t.
* Flags the descriptors for refill later. If available descriptors go
* below the threshold to receive a 64K pkt, new buffers are first allocated
* before the recv_pkt_t is created.
* This routine will be called in interrupt context.
* Returns:
* Success: Pointer to recv_info_t
* Failure: NULL.
* Locks:
* The droq->lock is held when this routine is called.
*/
static inline struct octeon_recv_info *octeon_create_recv_info(
struct octeon_device *octeon_dev,
struct octeon_droq *droq,
u32 buf_cnt,
u32 idx)
{
struct octeon_droq_info *info;
struct octeon_recv_pkt *recv_pkt;
struct octeon_recv_info *recv_info;
u32 i, bytes_left;
struct octeon_skb_page_info *pg_info;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
info = (struct octeon_droq_info *)droq->recv_buf_list[idx].data;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
recv_info = octeon_alloc_recv_info(sizeof(struct __dispatch));
if (!recv_info)
return NULL;
recv_pkt = recv_info->recv_pkt;
recv_pkt->rh = info->rh;
recv_pkt->length = (u32)info->length;
recv_pkt->buffer_count = (u16)buf_cnt;
recv_pkt->octeon_id = (u16)octeon_dev->octeon_id;
i = 0;
bytes_left = (u32)info->length;
while (buf_cnt) {
{
pg_info = &droq->recv_buf_list[idx].pg_info;
lio_unmap_ring(octeon_dev->pci_dev,
(u64)pg_info->dma);
pg_info->page = NULL;
pg_info->dma = 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
recv_pkt->buffer_size[i] =
(bytes_left >=
droq->buffer_size) ? droq->buffer_size : bytes_left;
recv_pkt->buffer_ptr[i] = droq->recv_buf_list[idx].buffer;
droq->recv_buf_list[idx].buffer = NULL;
idx = incr_index(idx, 1, droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
bytes_left -= droq->buffer_size;
i++;
buf_cnt--;
}
return recv_info;
}
/* If we were not able to refill all buffers, try to move around
* the buffers that were not dispatched.
*/
static inline u32
octeon_droq_refill_pullup_descs(struct octeon_droq *droq,
struct octeon_droq_desc *desc_ring)
{
u32 desc_refilled = 0;
u32 refill_index = droq->refill_idx;
while (refill_index != droq->read_idx) {
if (droq->recv_buf_list[refill_index].buffer) {
droq->recv_buf_list[droq->refill_idx].buffer =
droq->recv_buf_list[refill_index].buffer;
droq->recv_buf_list[droq->refill_idx].data =
droq->recv_buf_list[refill_index].data;
desc_ring[droq->refill_idx].buffer_ptr =
desc_ring[refill_index].buffer_ptr;
droq->recv_buf_list[refill_index].buffer = NULL;
desc_ring[refill_index].buffer_ptr = 0;
do {
droq->refill_idx = incr_index(droq->refill_idx,
1,
droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
desc_refilled++;
droq->refill_count--;
} while (droq->recv_buf_list[droq->refill_idx].buffer);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
refill_index = incr_index(refill_index, 1, droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
} /* while */
return desc_refilled;
}
/* octeon_droq_refill
* Parameters:
* droq - droq in which descriptors require new buffers.
* Description:
* Called during normal DROQ processing in interrupt mode or by the poll
* thread to refill the descriptors from which buffers were dispatched
* to upper layers. Attempts to allocate new buffers. If that fails, moves
* up buffers (that were not dispatched) to form a contiguous ring.
* Returns:
* No of descriptors refilled.
* Locks:
* This routine is called with droq->lock held.
*/
static u32
octeon_droq_refill(struct octeon_device *octeon_dev, struct octeon_droq *droq)
{
struct octeon_droq_desc *desc_ring;
void *buf = NULL;
u8 *data;
u32 desc_refilled = 0;
struct octeon_skb_page_info *pg_info;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
desc_ring = droq->desc_ring;
while (droq->refill_count && (desc_refilled < droq->max_count)) {
/* If a valid buffer exists (happens if there is no dispatch),
* reuse
* the buffer, else allocate.
*/
if (!droq->recv_buf_list[droq->refill_idx].buffer) {
pg_info =
&droq->recv_buf_list[droq->refill_idx].pg_info;
/* Either recycle the existing pages or go for
* new page alloc
*/
if (pg_info->page)
buf = recv_buffer_reuse(octeon_dev, pg_info);
else
buf = recv_buffer_alloc(octeon_dev, pg_info);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
/* If a buffer could not be allocated, no point in
* continuing
*/
if (!buf) {
droq->stats.rx_alloc_failure++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
break;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->recv_buf_list[droq->refill_idx].buffer =
buf;
data = get_rbd(buf);
} else {
data = get_rbd(droq->recv_buf_list
[droq->refill_idx].buffer);
}
droq->recv_buf_list[droq->refill_idx].data = data;
desc_ring[droq->refill_idx].buffer_ptr =
lio_map_ring(droq->recv_buf_list[
droq->refill_idx].buffer);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->refill_idx = incr_index(droq->refill_idx, 1,
droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
desc_refilled++;
droq->refill_count--;
}
if (droq->refill_count)
desc_refilled +=
octeon_droq_refill_pullup_descs(droq, desc_ring);
/* if droq->refill_count
* The refill count would not change in pass two. We only moved buffers
* to close the gap in the ring, but we would still have the same no. of
* buffers to refill.
*/
return desc_refilled;
}
/** check if we can allocate packets to get out of oom.
* @param droq - Droq being checked.
* @return does not return anything
*/
void octeon_droq_check_oom(struct octeon_droq *droq)
{
int desc_refilled;
struct octeon_device *oct = droq->oct_dev;
if (readl(droq->pkts_credit_reg) <= CN23XX_SLI_DEF_BP) {
spin_lock_bh(&droq->lock);
desc_refilled = octeon_droq_refill(oct, droq);
if (desc_refilled) {
/* Flush the droq descriptor data to memory to be sure
* that when we update the credits the data in memory
* is accurate.
*/
wmb();
writel(desc_refilled, droq->pkts_credit_reg);
/* make sure mmio write completes */
mmiowb();
}
spin_unlock_bh(&droq->lock);
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
static inline u32
octeon_droq_get_bufcount(u32 buf_size, u32 total_len)
{
return ((total_len + buf_size - 1) / buf_size);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
static int
octeon_droq_dispatch_pkt(struct octeon_device *oct,
struct octeon_droq *droq,
union octeon_rh *rh,
struct octeon_droq_info *info)
{
u32 cnt;
octeon_dispatch_fn_t disp_fn;
struct octeon_recv_info *rinfo;
cnt = octeon_droq_get_bufcount(droq->buffer_size, (u32)info->length);
disp_fn = octeon_get_dispatch(oct, (u16)rh->r.opcode,
(u16)rh->r.subcode);
if (disp_fn) {
rinfo = octeon_create_recv_info(oct, droq, cnt, droq->read_idx);
if (rinfo) {
struct __dispatch *rdisp = rinfo->rsvd;
rdisp->rinfo = rinfo;
rdisp->disp_fn = disp_fn;
rinfo->recv_pkt->rh = *rh;
list_add_tail(&rdisp->list,
&droq->dispatch_list);
} else {
droq->stats.dropped_nomem++;
}
} else {
dev_err(&oct->pci_dev->dev, "DROQ: No dispatch function (opcode %u/%u)\n",
(unsigned int)rh->r.opcode,
(unsigned int)rh->r.subcode);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->stats.dropped_nodispatch++;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return cnt;
}
static inline void octeon_droq_drop_packets(struct octeon_device *oct,
struct octeon_droq *droq,
u32 cnt)
{
u32 i = 0, buf_cnt;
struct octeon_droq_info *info;
for (i = 0; i < cnt; i++) {
info = (struct octeon_droq_info *)
droq->recv_buf_list[droq->read_idx].data;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
octeon_swap_8B_data((u64 *)info, 2);
if (info->length) {
info->length += OCTNET_FRM_LENGTH_SIZE;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->stats.bytes_received += info->length;
buf_cnt = octeon_droq_get_bufcount(droq->buffer_size,
(u32)info->length);
} else {
dev_err(&oct->pci_dev->dev, "DROQ: In drop: pkt with len 0\n");
buf_cnt = 1;
}
droq->read_idx = incr_index(droq->read_idx, buf_cnt,
droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->refill_count += buf_cnt;
}
}
static u32
octeon_droq_fast_process_packets(struct octeon_device *oct,
struct octeon_droq *droq,
u32 pkts_to_process)
{
struct octeon_droq_info *info;
union octeon_rh *rh;
u32 pkt, total_len = 0, pkt_count;
pkt_count = pkts_to_process;
for (pkt = 0; pkt < pkt_count; pkt++) {
u32 pkt_len = 0;
struct sk_buff *nicbuf = NULL;
struct octeon_skb_page_info *pg_info;
void *buf;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
info = (struct octeon_droq_info *)
droq->recv_buf_list[droq->read_idx].data;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
octeon_swap_8B_data((u64 *)info, 2);
if (!info->length) {
dev_err(&oct->pci_dev->dev,
"DROQ[%d] idx: %d len:0, pkt_cnt: %d\n",
droq->q_no, droq->read_idx, pkt_count);
print_hex_dump_bytes("", DUMP_PREFIX_ADDRESS,
(u8 *)info,
OCT_DROQ_INFO_SIZE);
break;
}
/* Len of resp hdr in included in the received data len. */
rh = &info->rh;
info->length += OCTNET_FRM_LENGTH_SIZE;
rh->r_dh.len += (ROUNDUP8(OCT_DROQ_INFO_SIZE) / sizeof(u64));
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
total_len += (u32)info->length;
if (opcode_slow_path(rh)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
u32 buf_cnt;
buf_cnt = octeon_droq_dispatch_pkt(oct, droq, rh, info);
droq->read_idx = incr_index(droq->read_idx,
buf_cnt, droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->refill_count += buf_cnt;
} else {
if (info->length <= droq->buffer_size) {
pkt_len = (u32)info->length;
nicbuf = droq->recv_buf_list[
droq->read_idx].buffer;
pg_info = &droq->recv_buf_list[
droq->read_idx].pg_info;
if (recv_buffer_recycle(oct, pg_info))
pg_info->page = NULL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->recv_buf_list[droq->read_idx].buffer =
NULL;
droq->read_idx = incr_index(droq->read_idx, 1,
droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->refill_count++;
} else {
nicbuf = octeon_fast_packet_alloc((u32)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
info->length);
pkt_len = 0;
/* nicbuf allocation can fail. We'll handle it
* inside the loop.
*/
while (pkt_len < info->length) {
int cpy_len, idx = droq->read_idx;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
cpy_len = ((pkt_len + droq->buffer_size)
> info->length) ?
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
((u32)info->length - pkt_len) :
droq->buffer_size;
if (nicbuf) {
octeon_fast_packet_next(droq,
nicbuf,
cpy_len,
idx);
buf = droq->recv_buf_list[
idx].buffer;
recv_buffer_fast_free(buf);
droq->recv_buf_list[idx].buffer
= NULL;
} else {
droq->stats.rx_alloc_failure++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
pkt_len += cpy_len;
droq->read_idx =
incr_index(droq->read_idx, 1,
droq->max_count);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->refill_count++;
}
}
if (nicbuf) {
if (droq->ops.fptr) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->ops.fptr(oct->octeon_id,
nicbuf, pkt_len,
rh, &droq->napi,
droq->ops.farg);
} else {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
recv_buffer_free(nicbuf);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
}
if (droq->refill_count >= droq->refill_threshold) {
int desc_refilled = octeon_droq_refill(oct, droq);
/* Flush the droq descriptor data to memory to be sure
* that when we update the credits the data in memory
* is accurate.
*/
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
wmb();
writel((desc_refilled), droq->pkts_credit_reg);
/* make sure mmio write completes */
mmiowb();
}
} /* for (each packet)... */
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
/* Increment refill_count by the number of buffers processed. */
droq->stats.pkts_received += pkt;
droq->stats.bytes_received += total_len;
if ((droq->ops.drop_on_max) && (pkts_to_process - pkt)) {
octeon_droq_drop_packets(oct, droq, (pkts_to_process - pkt));
droq->stats.dropped_toomany += (pkts_to_process - pkt);
return pkts_to_process;
}
return pkt;
}
int
octeon_droq_process_packets(struct octeon_device *oct,
struct octeon_droq *droq,
u32 budget)
{
u32 pkt_count = 0, pkts_processed = 0;
struct list_head *tmp, *tmp2;
/* Grab the droq lock */
spin_lock(&droq->lock);
octeon_droq_check_hw_for_pkts(droq);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
pkt_count = atomic_read(&droq->pkts_pending);
if (!pkt_count) {
spin_unlock(&droq->lock);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (pkt_count > budget)
pkt_count = budget;
pkts_processed = octeon_droq_fast_process_packets(oct, droq, pkt_count);
atomic_sub(pkts_processed, &droq->pkts_pending);
/* Release the spin lock */
spin_unlock(&droq->lock);
list_for_each_safe(tmp, tmp2, &droq->dispatch_list) {
struct __dispatch *rdisp = (struct __dispatch *)tmp;
list_del(tmp);
rdisp->disp_fn(rdisp->rinfo,
octeon_get_dispatch_arg
(oct,
(u16)rdisp->rinfo->recv_pkt->rh.r.opcode,
(u16)rdisp->rinfo->recv_pkt->rh.r.subcode));
}
/* If there are packets pending. schedule tasklet again */
if (atomic_read(&droq->pkts_pending))
return 1;
return 0;
}
/**
* Utility function to poll for packets. check_hw_for_packets must be
* called before calling this routine.
*/
static int
octeon_droq_process_poll_pkts(struct octeon_device *oct,
struct octeon_droq *droq, u32 budget)
{
struct list_head *tmp, *tmp2;
u32 pkts_available = 0, pkts_processed = 0;
u32 total_pkts_processed = 0;
if (budget > droq->max_count)
budget = droq->max_count;
spin_lock(&droq->lock);
while (total_pkts_processed < budget) {
octeon_droq_check_hw_for_pkts(droq);
pkts_available = min((budget - total_pkts_processed),
(u32)(atomic_read(&droq->pkts_pending)));
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (pkts_available == 0)
break;
pkts_processed =
octeon_droq_fast_process_packets(oct, droq,
pkts_available);
atomic_sub(pkts_processed, &droq->pkts_pending);
total_pkts_processed += pkts_processed;
}
spin_unlock(&droq->lock);
list_for_each_safe(tmp, tmp2, &droq->dispatch_list) {
struct __dispatch *rdisp = (struct __dispatch *)tmp;
list_del(tmp);
rdisp->disp_fn(rdisp->rinfo,
octeon_get_dispatch_arg
(oct,
(u16)rdisp->rinfo->recv_pkt->rh.r.opcode,
(u16)rdisp->rinfo->recv_pkt->rh.r.subcode));
}
return total_pkts_processed;
}
int
octeon_process_droq_poll_cmd(struct octeon_device *oct, u32 q_no, int cmd,
u32 arg)
{
struct octeon_droq *droq;
droq = oct->droq[q_no];
if (cmd == POLL_EVENT_PROCESS_PKTS)
return octeon_droq_process_poll_pkts(oct, droq, arg);
if (cmd == POLL_EVENT_PENDING_PKTS) {
u32 pkt_cnt = atomic_read(&droq->pkts_pending);
return octeon_droq_process_packets(oct, droq, pkt_cnt);
}
if (cmd == POLL_EVENT_ENABLE_INTR) {
u32 value;
unsigned long flags;
/* Enable Pkt Interrupt */
switch (oct->chip_id) {
case OCTEON_CN66XX:
case OCTEON_CN68XX: {
struct octeon_cn6xxx *cn6xxx =
(struct octeon_cn6xxx *)oct->chip;
spin_lock_irqsave
(&cn6xxx->lock_for_droq_int_enb_reg, flags);
value =
octeon_read_csr(oct,
CN6XXX_SLI_PKT_TIME_INT_ENB);
value |= (1 << q_no);
octeon_write_csr(oct,
CN6XXX_SLI_PKT_TIME_INT_ENB,
value);
value =
octeon_read_csr(oct,
CN6XXX_SLI_PKT_CNT_INT_ENB);
value |= (1 << q_no);
octeon_write_csr(oct,
CN6XXX_SLI_PKT_CNT_INT_ENB,
value);
/* don't bother flushing the enables */
spin_unlock_irqrestore
(&cn6xxx->lock_for_droq_int_enb_reg, flags);
return 0;
}
break;
case OCTEON_CN23XX_PF_VID: {
lio_enable_irq(oct->droq[q_no], oct->instr_queue[q_no]);
}
break;
case OCTEON_CN23XX_VF_VID:
lio_enable_irq(oct->droq[q_no], oct->instr_queue[q_no]);
break;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
return 0;
}
dev_err(&oct->pci_dev->dev, "%s Unknown command: %d\n", __func__, cmd);
return -EINVAL;
}
int octeon_register_droq_ops(struct octeon_device *oct, u32 q_no,
struct octeon_droq_ops *ops)
{
struct octeon_droq *droq;
unsigned long flags;
struct octeon_config *oct_cfg = NULL;
oct_cfg = octeon_get_conf(oct);
if (!oct_cfg)
return -EINVAL;
if (!(ops)) {
dev_err(&oct->pci_dev->dev, "%s: droq_ops pointer is NULL\n",
__func__);
return -EINVAL;
}
if (q_no >= CFG_GET_OQ_MAX_Q(oct_cfg)) {
dev_err(&oct->pci_dev->dev, "%s: droq id (%d) exceeds MAX (%d)\n",
__func__, q_no, (oct->num_oqs - 1));
return -EINVAL;
}
droq = oct->droq[q_no];
spin_lock_irqsave(&droq->lock, flags);
memcpy(&droq->ops, ops, sizeof(struct octeon_droq_ops));
spin_unlock_irqrestore(&droq->lock, flags);
return 0;
}
int octeon_unregister_droq_ops(struct octeon_device *oct, u32 q_no)
{
unsigned long flags;
struct octeon_droq *droq;
struct octeon_config *oct_cfg = NULL;
oct_cfg = octeon_get_conf(oct);
if (!oct_cfg)
return -EINVAL;
if (q_no >= CFG_GET_OQ_MAX_Q(oct_cfg)) {
dev_err(&oct->pci_dev->dev, "%s: droq id (%d) exceeds MAX (%d)\n",
__func__, q_no, oct->num_oqs - 1);
return -EINVAL;
}
droq = oct->droq[q_no];
if (!droq) {
dev_info(&oct->pci_dev->dev,
"Droq id (%d) not available.\n", q_no);
return 0;
}
spin_lock_irqsave(&droq->lock, flags);
droq->ops.fptr = NULL;
droq->ops.farg = NULL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
droq->ops.drop_on_max = 0;
spin_unlock_irqrestore(&droq->lock, flags);
return 0;
}
int octeon_create_droq(struct octeon_device *oct,
u32 q_no, u32 num_descs,
u32 desc_size, void *app_ctx)
{
struct octeon_droq *droq;
int numa_node = dev_to_node(&oct->pci_dev->dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (oct->droq[q_no]) {
dev_dbg(&oct->pci_dev->dev, "Droq already in use. Cannot create droq %d again\n",
q_no);
return 1;
}
/* Allocate the DS for the new droq. */
droq = vmalloc_node(sizeof(*droq), numa_node);
if (!droq)
droq = vmalloc(sizeof(*droq));
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (!droq)
return -1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
memset(droq, 0, sizeof(struct octeon_droq));
/*Disable the pkt o/p for this Q */
octeon_set_droq_pkt_op(oct, q_no, 0);
oct->droq[q_no] = droq;
/* Initialize the Droq */
if (octeon_init_droq(oct, q_no, num_descs, desc_size, app_ctx)) {
vfree(oct->droq[q_no]);
oct->droq[q_no] = NULL;
return -1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
oct->num_oqs++;
dev_dbg(&oct->pci_dev->dev, "%s: Total number of OQ: %d\n", __func__,
oct->num_oqs);
/* Global Droq register settings */
/* As of now not required, as setting are done for all 32 Droqs at
* the same time.
*/
return 0;
}