OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_dp_mst.c

617 lines
19 KiB
C
Raw Normal View History

2014-05-02 12:02:48 +08:00
/*
* Copyright © 2008 Intel Corporation
* 2014 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <drm/drmP.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include <drm/drm_atomic_helper.h>
2014-05-02 12:02:48 +08:00
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
2014-05-02 12:02:48 +08:00
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
2014-05-02 12:02:48 +08:00
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct intel_connector *connector =
to_intel_connector(conn_state->connector);
struct drm_atomic_state *state = pipe_config->base.state;
int bpp;
int lane_count, slots;
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
2014-05-02 12:02:48 +08:00
int mst_pbn;
bool reduce_m_n = drm_dp_has_quirk(&intel_dp->desc,
DP_DPCD_QUIRK_LIMITED_M_N);
2014-05-02 12:02:48 +08:00
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return false;
2014-05-02 12:02:48 +08:00
pipe_config->has_pch_encoder = false;
bpp = 24;
drm/i915: Add support for DP Video pattern compliance tests The intel_dp_autotest_video_pattern() function gets invoked through the compliance test handler on a HPD short pulse if the test type is set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers reads to read the requested test pattern, video pattern resolution, frame rate and bits per color value. The results of this analysis are handed off to userspace so that the userspace app can set the video pattern mode appropriately for the test result/response. When the test is requested with specific BPC value, we read the BPC value from the DPCD register. If this BPC value in intel_dp structure has a non-zero value and we're on a display port connector, then we use the value to calculate the bpp for the pipe. Also in this case if its a 18bpp video pattern request, then we force the dithering on pipe to be disabled since it causes CRC mismatches. The compliance_test_active flag is set at the end of the individual test handling functions. This is so that the kernel-side operations can be completed without the risk of interruption from the userspace app that is polling on that flag. v5: * Remove test_result variable * Populate the compliance test data at the end of the function (Jani Nikula) v4: *Return TEST_NAK on read failures and invalid values (Jani Nikula) * Address CRC mismatch errors v3: * Use the updated properly shifted bit definitions (Jani Nikula) * Force dithering to be disabled on 18bpp compliance test request (Manasi Navare) v2: * Updated the DPCD Register reads based on proper defines in header (Jani Nikula) * Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485274909-17470-1-git-send-email-manasi.d.navare@intel.com
2017-01-25 00:21:49 +08:00
if (intel_dp->compliance.test_data.bpc) {
bpp = intel_dp->compliance.test_data.bpc * 3;
DRM_DEBUG_KMS("Setting pipe bpp to %d\n",
bpp);
}
2014-05-02 12:02:48 +08:00
/*
* for MST we always configure max link bw - the spec doesn't
* seem to suggest we should do otherwise.
*/
lane_count = intel_dp_max_lane_count(intel_dp);
pipe_config->lane_count = lane_count;
2014-05-02 12:02:48 +08:00
drm/i915: Add support for DP Video pattern compliance tests The intel_dp_autotest_video_pattern() function gets invoked through the compliance test handler on a HPD short pulse if the test type is set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers reads to read the requested test pattern, video pattern resolution, frame rate and bits per color value. The results of this analysis are handed off to userspace so that the userspace app can set the video pattern mode appropriately for the test result/response. When the test is requested with specific BPC value, we read the BPC value from the DPCD register. If this BPC value in intel_dp structure has a non-zero value and we're on a display port connector, then we use the value to calculate the bpp for the pipe. Also in this case if its a 18bpp video pattern request, then we force the dithering on pipe to be disabled since it causes CRC mismatches. The compliance_test_active flag is set at the end of the individual test handling functions. This is so that the kernel-side operations can be completed without the risk of interruption from the userspace app that is polling on that flag. v5: * Remove test_result variable * Populate the compliance test data at the end of the function (Jani Nikula) v4: *Return TEST_NAK on read failures and invalid values (Jani Nikula) * Address CRC mismatch errors v3: * Use the updated properly shifted bit definitions (Jani Nikula) * Force dithering to be disabled on 18bpp compliance test request (Manasi Navare) v2: * Updated the DPCD Register reads based on proper defines in header (Jani Nikula) * Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485274909-17470-1-git-send-email-manasi.d.navare@intel.com
2017-01-25 00:21:49 +08:00
pipe_config->pipe_bpp = bpp;
2014-05-02 12:02:48 +08:00
pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, connector->port))
pipe_config->has_audio = true;
2014-05-02 12:02:48 +08:00
mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
2014-05-02 12:02:48 +08:00
pipe_config->pbn = mst_pbn;
slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
connector->port, mst_pbn);
if (slots < 0) {
DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
return false;
}
2014-05-02 12:02:48 +08:00
intel_link_compute_m_n(bpp, lane_count,
adjusted_mode->crtc_clock,
pipe_config->port_clock,
&pipe_config->dp_m_n,
reduce_m_n);
2014-05-02 12:02:48 +08:00
pipe_config->dp_m_n.tu = slots;
if (IS_GEN9_LP(dev_priv))
pipe_config->lane_lat_optim_mask =
bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count);
intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
2014-05-02 12:02:48 +08:00
return true;
}
2014-05-02 12:02:48 +08:00
static int intel_dp_mst_atomic_check(struct drm_connector *connector,
struct drm_connector_state *new_conn_state)
{
struct drm_atomic_state *state = new_conn_state->state;
struct drm_connector_state *old_conn_state;
struct drm_crtc *old_crtc;
struct drm_crtc_state *crtc_state;
int slots, ret = 0;
old_conn_state = drm_atomic_get_old_connector_state(state, connector);
old_crtc = old_conn_state->crtc;
if (!old_crtc)
return ret;
crtc_state = drm_atomic_get_new_crtc_state(state, old_crtc);
slots = to_intel_crtc_state(crtc_state)->dp_m_n.tu;
if (drm_atomic_crtc_needs_modeset(crtc_state) && slots > 0) {
struct drm_dp_mst_topology_mgr *mgr;
struct drm_encoder *old_encoder;
old_encoder = old_conn_state->best_encoder;
mgr = &enc_to_mst(old_encoder)->primary->dp.mst_mgr;
ret = drm_dp_atomic_release_vcpi_slots(state, mgr, slots);
if (ret)
DRM_DEBUG_KMS("failed releasing %d vcpi slots:%d\n", slots, ret);
else
to_intel_crtc_state(crtc_state)->dp_m_n.tu = 0;
}
return ret;
2014-05-02 12:02:48 +08:00
}
static void intel_mst_disable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
2014-05-02 12:02:48 +08:00
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct intel_connector *connector =
to_intel_connector(old_conn_state->connector);
2014-05-02 12:02:48 +08:00
int ret;
DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
2014-05-02 12:02:48 +08:00
drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
2014-05-02 12:02:48 +08:00
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
}
drm/i915: Fix POWER_DOMAIN_AUDIO refcounting. If the crtc was brought up with audio before the driver loads, then crtc_disable will remove a refcount to audio that doesn't exist before. Fortunately we already set power domains on readout, so we can just add the power domain handling to get_crtc_power_domains, which will update the power domains correctly in all cases. This was found when testing module reload on CI with the crtc enabled, which resulted in the following warn after module reload + modeset: [ 24.197041] ------------[ cut here ]------------ [ 24.197075] WARNING: CPU: 0 PID: 99 at drivers/gpu/drm/i915/intel_runtime_pm.c:1790 intel_display_power_put+0x134/0x140 [i915] [ 24.197076] Use count on domain AUDIO is already zero [ 24.197098] CPU: 0 PID: 99 Comm: kworker/u8:2 Not tainted 4.9.0-CI-Trybot_393+ #1 [ 24.197099] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0042.2016.0409.1246 04/09/2016 [ 24.197102] Workqueue: events_unbound async_run_entry_fn [ 24.197105] ffffc900003c7688 ffffffff81435b35 ffffc900003c76d8 0000000000000000 [ 24.197107] ffffc900003c76c8 ffffffff8107e4d6 000006fe5dc36f28 ffff88025dc30054 [ 24.197109] ffff88025dc36f28 ffff88025dc30000 ffff88025dc30000 0000000000000015 [ 24.197110] Call Trace: [ 24.197113] [<ffffffff81435b35>] dump_stack+0x67/0x92 [ 24.197116] [<ffffffff8107e4d6>] __warn+0xc6/0xe0 [ 24.197118] [<ffffffff8107e53a>] warn_slowpath_fmt+0x4a/0x50 [ 24.197149] [<ffffffffa039b4b4>] intel_display_power_put+0x134/0x140 [i915] [ 24.197187] [<ffffffffa04217dd>] intel_disable_ddi+0x4d/0x80 [i915] [ 24.197223] [<ffffffffa03f388f>] intel_encoders_disable.isra.74+0x7f/0x90 [i915] [ 24.197257] [<ffffffffa03f6c05>] haswell_crtc_disable+0x55/0x170 [i915] [ 24.197292] [<ffffffffa03fec88>] intel_atomic_commit_tail+0x108/0xfd0 [i915] [ 24.197295] [<ffffffff810d47c6>] ? __lock_is_held+0x66/0x90 [ 24.197330] [<ffffffffa03fff79>] intel_atomic_commit+0x429/0x560 [i915] [ 24.197332] [<ffffffff81570186>] ?drm_atomic_add_affected_connectors+0x56/0xf0 [ 24.197334] [<ffffffff8156f726>] drm_atomic_commit+0x46/0x50 [ 24.197336] [<ffffffff81553f87>] restore_fbdev_mode+0x147/0x270 [ 24.197337] [<ffffffff81555bee>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [ 24.197339] [<ffffffff81555aa8>] drm_fb_helper_set_par+0x28/0x50 [ 24.197374] [<ffffffffa041c7d3>] intel_fbdev_set_par+0x13/0x70 [i915] [ 24.197376] [<ffffffff8149e07a>] fbcon_init+0x57a/0x600 [ 24.197379] [<ffffffff81514b71>] visual_init+0xd1/0x130 [ 24.197381] [<ffffffff8151603c>] do_bind_con_driver+0x1bc/0x3a0 [ 24.197384] [<ffffffff81516521>] do_take_over_console+0x111/0x180 [ 24.197386] [<ffffffff8149e152>] do_fbcon_takeover+0x52/0xb0 [ 24.197387] [<ffffffff814a12c3>] fbcon_event_notify+0x723/0x850 [ 24.197390] [<ffffffff810a4830>] ?__blocking_notifier_call_chain+0x30/0x70 [ 24.197392] [<ffffffff810a44a4>] notifier_call_chain+0x34/0xa0 [ 24.197394] [<ffffffff810a4848>] __blocking_notifier_call_chain+0x48/0x70 [ 24.197397] [<ffffffff810a4881>] blocking_notifier_call_chain+0x11/0x20 [ 24.197398] [<ffffffff814a4556>] fb_notifier_call_chain+0x16/0x20 [ 24.197400] [<ffffffff814a678c>] register_framebuffer+0x24c/0x330 [ 24.197402] [<ffffffff815558d9>] drm_fb_helper_initial_config+0x219/0x3c0 [ 24.197436] [<ffffffffa041d373>] intel_fbdev_initial_config+0x13/0x30 [i915] [ 24.197438] [<ffffffff810a5d44>] async_run_entry_fn+0x34/0x140 [ 24.197440] [<ffffffff8109c26c>] process_one_work+0x1ec/0x6b0 [ 24.197442] [<ffffffff8109c1e6>] ? process_one_work+0x166/0x6b0 [ 24.197445] [<ffffffff8109c779>] worker_thread+0x49/0x490 [ 24.197447] [<ffffffff8109c730>] ? process_one_work+0x6b0/0x6b0 [ 24.197448] [<ffffffff810a2a9b>] kthread+0xeb/0x110 [ 24.197451] [<ffffffff810a29b0>] ? kthread_park+0x60/0x60 [ 24.197453] [<ffffffff818241a7>] ret_from_fork+0x27/0x40 [ 24.197476] ---[ end trace bda64b683b8e8162 ]--- Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-15 22:29:43 +08:00
if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
2014-05-02 12:02:48 +08:00
}
static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
2014-05-02 12:02:48 +08:00
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct intel_connector *connector =
to_intel_connector(old_conn_state->connector);
2014-05-02 12:02:48 +08:00
/* this can fail */
drm_dp_check_act_status(&intel_dp->mst_mgr);
/* and this can also fail */
drm_dp_update_payload_part2(&intel_dp->mst_mgr);
drm_dp_mst_deallocate_vcpi(&intel_dp->mst_mgr, connector->port);
2014-05-02 12:02:48 +08:00
/*
* Power down mst path before disabling the port, otherwise we end
* up getting interrupts from the sink upon detecting link loss.
*/
drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port,
false);
intel_dp->active_mst_links--;
intel_mst->connector = NULL;
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 09:10:53 +08:00
if (intel_dp->active_mst_links == 0) {
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
intel_dig_port->base.post_disable(&intel_dig_port->base,
old_crtc_state, NULL);
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 09:10:53 +08:00
}
DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
2014-05-02 12:02:48 +08:00
}
static void intel_mst_pre_pll_enable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
if (intel_dp->active_mst_links == 0 &&
intel_dig_port->base.pre_pll_enable)
intel_dig_port->base.pre_pll_enable(&intel_dig_port->base,
pipe_config, NULL);
}
static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
2014-05-02 12:02:48 +08:00
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 23:24:34 +08:00
enum port port = intel_dig_port->base.port;
struct intel_connector *connector =
to_intel_connector(conn_state->connector);
2014-05-02 12:02:48 +08:00
int ret;
uint32_t temp;
/* MST encoders are bound to a crtc, not to a connector,
* force the mapping here for get_hw_state.
*/
connector->encoder = encoder;
intel_mst->connector = connector;
DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 09:10:53 +08:00
if (intel_dp->active_mst_links == 0)
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true);
drm/i915/dp: Send DPCD ON for MST before phy_up When doing a modeset where the sink is transitioning from D3 to D0 , it would sometimes be possible for the initial power_up_phy() to start timing out. This would only be observed in the last action before the sink went into D3 mode was intel_dp_sink_dpms(DRM_MODE_DPMS_OFF). We originally thought this might be an issue with us accidentally shutting off the aux block when putting the sink into D3, but since the DP spec mandates that sinks must wake up within 1ms while we have 100ms to respond to an ESI irq, this didn't really add up. Turns out that the problem is more subtle then that: It turns out that the timeout is from us not enabling DPMS on the MST hub before actually trying to initiate sideband communications. This would cause the first sideband communication (power_up_phy()), to start timing out because the sink wasn't ready to respond. Afterwards, we would call intel_dp_sink_dpms(DRM_MODE_DPMS_ON) in intel_ddi_pre_enable_dp(), which would actually result in waking up the sink so that sideband requests would work again. Since DPMS is what lets us actually bring the hub up into a state where sideband communications become functional again, we just need to make sure to enable DPMS on the display before attempting to perform sideband communications. Changes since v1: - Remove comment above if (!intel_dp->is_mst) - vsryjala - Move intel_dp_sink_dpms() for MST into intel_dp_post_disable_mst() to keep enable/disable paths symmetrical - Improve commit message - dhnkrn Changes since v2: - Only send DPMS off when we're disabling the last sink, and only send DPMS on when we're enabling the first sink - dhnkrn Changes since v3: - Check against is_mst, not intel_dp->is_mst - dhnkrn/vsyrjala Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: ad260ab32a4d9 ("drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.") Link: https://patchwork.freedesktop.org/patch/msgid/20180407011053.22437-1-lyude@redhat.com
2018-04-07 09:10:53 +08:00
if (intel_dp->active_mst_links == 0)
intel_dig_port->base.pre_enable(&intel_dig_port->base,
pipe_config, NULL);
2014-05-02 12:02:48 +08:00
ret = drm_dp_mst_allocate_vcpi(&intel_dp->mst_mgr,
connector->port,
pipe_config->pbn,
pipe_config->dp_m_n.tu);
2014-05-02 12:02:48 +08:00
if (ret == false) {
DRM_ERROR("failed to allocate vcpi\n");
return;
}
intel_dp->active_mst_links++;
2014-05-02 12:02:48 +08:00
temp = I915_READ(DP_TP_STATUS(port));
I915_WRITE(DP_TP_STATUS(port), temp);
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
}
static void intel_mst_enable_dp(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
2014-05-02 12:02:48 +08:00
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 23:24:34 +08:00
enum port port = intel_dig_port->base.port;
2014-05-02 12:02:48 +08:00
int ret;
DRM_DEBUG_KMS("active links %d\n", intel_dp->active_mst_links);
2014-05-02 12:02:48 +08:00
if (intel_wait_for_register(dev_priv,
DP_TP_STATUS(port),
DP_TP_STATUS_ACT_SENT,
DP_TP_STATUS_ACT_SENT,
1))
2014-05-02 12:02:48 +08:00
DRM_ERROR("Timed out waiting for ACT sent\n");
ret = drm_dp_check_act_status(&intel_dp->mst_mgr);
ret = drm_dp_update_payload_part2(&intel_dp->mst_mgr);
drm/i915: Fix POWER_DOMAIN_AUDIO refcounting. If the crtc was brought up with audio before the driver loads, then crtc_disable will remove a refcount to audio that doesn't exist before. Fortunately we already set power domains on readout, so we can just add the power domain handling to get_crtc_power_domains, which will update the power domains correctly in all cases. This was found when testing module reload on CI with the crtc enabled, which resulted in the following warn after module reload + modeset: [ 24.197041] ------------[ cut here ]------------ [ 24.197075] WARNING: CPU: 0 PID: 99 at drivers/gpu/drm/i915/intel_runtime_pm.c:1790 intel_display_power_put+0x134/0x140 [i915] [ 24.197076] Use count on domain AUDIO is already zero [ 24.197098] CPU: 0 PID: 99 Comm: kworker/u8:2 Not tainted 4.9.0-CI-Trybot_393+ #1 [ 24.197099] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0042.2016.0409.1246 04/09/2016 [ 24.197102] Workqueue: events_unbound async_run_entry_fn [ 24.197105] ffffc900003c7688 ffffffff81435b35 ffffc900003c76d8 0000000000000000 [ 24.197107] ffffc900003c76c8 ffffffff8107e4d6 000006fe5dc36f28 ffff88025dc30054 [ 24.197109] ffff88025dc36f28 ffff88025dc30000 ffff88025dc30000 0000000000000015 [ 24.197110] Call Trace: [ 24.197113] [<ffffffff81435b35>] dump_stack+0x67/0x92 [ 24.197116] [<ffffffff8107e4d6>] __warn+0xc6/0xe0 [ 24.197118] [<ffffffff8107e53a>] warn_slowpath_fmt+0x4a/0x50 [ 24.197149] [<ffffffffa039b4b4>] intel_display_power_put+0x134/0x140 [i915] [ 24.197187] [<ffffffffa04217dd>] intel_disable_ddi+0x4d/0x80 [i915] [ 24.197223] [<ffffffffa03f388f>] intel_encoders_disable.isra.74+0x7f/0x90 [i915] [ 24.197257] [<ffffffffa03f6c05>] haswell_crtc_disable+0x55/0x170 [i915] [ 24.197292] [<ffffffffa03fec88>] intel_atomic_commit_tail+0x108/0xfd0 [i915] [ 24.197295] [<ffffffff810d47c6>] ? __lock_is_held+0x66/0x90 [ 24.197330] [<ffffffffa03fff79>] intel_atomic_commit+0x429/0x560 [i915] [ 24.197332] [<ffffffff81570186>] ?drm_atomic_add_affected_connectors+0x56/0xf0 [ 24.197334] [<ffffffff8156f726>] drm_atomic_commit+0x46/0x50 [ 24.197336] [<ffffffff81553f87>] restore_fbdev_mode+0x147/0x270 [ 24.197337] [<ffffffff81555bee>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [ 24.197339] [<ffffffff81555aa8>] drm_fb_helper_set_par+0x28/0x50 [ 24.197374] [<ffffffffa041c7d3>] intel_fbdev_set_par+0x13/0x70 [i915] [ 24.197376] [<ffffffff8149e07a>] fbcon_init+0x57a/0x600 [ 24.197379] [<ffffffff81514b71>] visual_init+0xd1/0x130 [ 24.197381] [<ffffffff8151603c>] do_bind_con_driver+0x1bc/0x3a0 [ 24.197384] [<ffffffff81516521>] do_take_over_console+0x111/0x180 [ 24.197386] [<ffffffff8149e152>] do_fbcon_takeover+0x52/0xb0 [ 24.197387] [<ffffffff814a12c3>] fbcon_event_notify+0x723/0x850 [ 24.197390] [<ffffffff810a4830>] ?__blocking_notifier_call_chain+0x30/0x70 [ 24.197392] [<ffffffff810a44a4>] notifier_call_chain+0x34/0xa0 [ 24.197394] [<ffffffff810a4848>] __blocking_notifier_call_chain+0x48/0x70 [ 24.197397] [<ffffffff810a4881>] blocking_notifier_call_chain+0x11/0x20 [ 24.197398] [<ffffffff814a4556>] fb_notifier_call_chain+0x16/0x20 [ 24.197400] [<ffffffff814a678c>] register_framebuffer+0x24c/0x330 [ 24.197402] [<ffffffff815558d9>] drm_fb_helper_initial_config+0x219/0x3c0 [ 24.197436] [<ffffffffa041d373>] intel_fbdev_initial_config+0x13/0x30 [i915] [ 24.197438] [<ffffffff810a5d44>] async_run_entry_fn+0x34/0x140 [ 24.197440] [<ffffffff8109c26c>] process_one_work+0x1ec/0x6b0 [ 24.197442] [<ffffffff8109c1e6>] ? process_one_work+0x166/0x6b0 [ 24.197445] [<ffffffff8109c779>] worker_thread+0x49/0x490 [ 24.197447] [<ffffffff8109c730>] ? process_one_work+0x6b0/0x6b0 [ 24.197448] [<ffffffff810a2a9b>] kthread+0xeb/0x110 [ 24.197451] [<ffffffff810a29b0>] ? kthread_park+0x60/0x60 [ 24.197453] [<ffffffff818241a7>] ret_from_fork+0x27/0x40 [ 24.197476] ---[ end trace bda64b683b8e8162 ]--- Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-15 22:29:43 +08:00
if (pipe_config->has_audio)
intel_audio_codec_enable(encoder, pipe_config, conn_state);
2014-05-02 12:02:48 +08:00
}
static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
*pipe = intel_mst->pipe;
if (intel_mst->connector)
2014-05-02 12:02:48 +08:00
return true;
return false;
}
static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
2014-05-02 12:02:48 +08:00
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
struct intel_digital_port *intel_dig_port = intel_mst->primary;
intel_ddi_get_config(&intel_dig_port->base, pipe_config);
2014-05-02 12:02:48 +08:00
}
static int intel_dp_mst_get_ddc_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dp *intel_dp = intel_connector->mst_port;
struct edid *edid;
int ret;
if (!intel_dp) {
return intel_connector_update_modes(connector, NULL);
}
2014-05-02 12:02:48 +08:00
edid = drm_dp_mst_get_edid(connector, &intel_dp->mst_mgr, intel_connector->port);
2014-05-02 12:02:48 +08:00
ret = intel_connector_update_modes(connector, edid);
kfree(edid);
return ret;
}
static enum drm_connector_status
intel_dp_mst_detect(struct drm_connector *connector, bool force)
2014-05-02 12:02:48 +08:00
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dp *intel_dp = intel_connector->mst_port;
if (!intel_dp)
return connector_status_disconnected;
return drm_dp_mst_detect_port(connector, &intel_dp->mst_mgr, intel_connector->port);
2014-05-02 12:02:48 +08:00
}
static void
intel_dp_mst_connector_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
if (!IS_ERR_OR_NULL(intel_connector->edid))
kfree(intel_connector->edid);
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_connector_funcs intel_dp_mst_connector_funcs = {
.detect = intel_dp_mst_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
2014-05-02 12:02:48 +08:00
.destroy = intel_dp_mst_connector_destroy,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
2014-05-02 12:02:48 +08:00
};
static int intel_dp_mst_get_modes(struct drm_connector *connector)
{
return intel_dp_mst_get_ddc_modes(connector);
}
static enum drm_mode_status
intel_dp_mst_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dp *intel_dp = intel_connector->mst_port;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
int bpp = 24; /* MST uses fixed bpp */
int max_rate, mode_rate, max_lanes, max_link_clock;
if (!intel_dp)
return MODE_ERROR;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
max_link_clock = intel_dp_max_link_rate(intel_dp);
max_lanes = intel_dp_max_lane_count(intel_dp);
max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
mode_rate = intel_dp_link_required(mode->clock, bpp);
2014-05-02 12:02:48 +08:00
/* TODO - validate mode against available PBN for link */
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
return MODE_H_ILLEGAL;
if (mode_rate > max_rate || mode->clock > max_dotclk)
return MODE_CLOCK_HIGH;
2014-05-02 12:02:48 +08:00
return MODE_OK;
}
static struct drm_encoder *intel_mst_atomic_best_encoder(struct drm_connector *connector,
struct drm_connector_state *state)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dp *intel_dp = intel_connector->mst_port;
struct intel_crtc *crtc = to_intel_crtc(state->crtc);
if (!intel_dp)
return NULL;
return &intel_dp->mst_encoders[crtc->pipe]->base.base;
}
2014-05-02 12:02:48 +08:00
static const struct drm_connector_helper_funcs intel_dp_mst_connector_helper_funcs = {
.get_modes = intel_dp_mst_get_modes,
.mode_valid = intel_dp_mst_mode_valid,
.atomic_best_encoder = intel_mst_atomic_best_encoder,
.atomic_check = intel_dp_mst_atomic_check,
2014-05-02 12:02:48 +08:00
};
static void intel_dp_mst_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
drm_encoder_cleanup(encoder);
kfree(intel_mst);
}
static const struct drm_encoder_funcs intel_dp_mst_enc_funcs = {
.destroy = intel_dp_mst_encoder_destroy,
};
static bool intel_dp_mst_get_hw_state(struct intel_connector *connector)
{
if (connector->encoder && connector->base.state->crtc) {
2014-05-02 12:02:48 +08:00
enum pipe pipe;
if (!connector->encoder->get_hw_state(connector->encoder, &pipe))
return false;
return true;
}
return false;
}
static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, const char *pathprop)
2014-05-02 12:02:48 +08:00
{
struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
2014-05-02 12:02:48 +08:00
struct intel_connector *intel_connector;
struct drm_connector *connector;
enum pipe pipe;
int ret;
2014-05-02 12:02:48 +08:00
intel_connector = intel_connector_alloc();
2014-05-02 12:02:48 +08:00
if (!intel_connector)
return NULL;
connector = &intel_connector->base;
ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
DRM_MODE_CONNECTOR_DisplayPort);
if (ret) {
intel_connector_free(intel_connector);
return NULL;
}
2014-05-02 12:02:48 +08:00
drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs);
intel_connector->get_hw_state = intel_dp_mst_get_hw_state;
intel_connector->mst_port = intel_dp;
intel_connector->port = port;
for_each_pipe(dev_priv, pipe) {
struct drm_encoder *enc =
&intel_dp->mst_encoders[pipe]->base.base;
ret = drm_connector_attach_encoder(&intel_connector->base, enc);
if (ret)
goto err;
2014-05-02 12:02:48 +08:00
}
drm_object_attach_property(&connector->base, dev->mode_config.path_property, 0);
drm_object_attach_property(&connector->base, dev->mode_config.tile_property, 0);
ret = drm_connector_set_path_property(connector, pathprop);
if (ret)
goto err;
return connector;
err:
drm_connector_cleanup(connector);
return NULL;
}
static void intel_dp_register_mst_connector(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
if (dev_priv->fbdev)
drm_fb_helper_add_one_connector(&dev_priv->fbdev->helper,
connector);
drm_connector_register(connector);
2014-05-02 12:02:48 +08:00
}
static void intel_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_i915_private *dev_priv = to_i915(connector->dev);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name);
drm_connector_unregister(connector);
drm/i915: Fix race condition in intel_dp_destroy_mst_connector() After unplugging a DP MST display from the system, we have to go through and destroy all of the DRM connectors associated with it since none of them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector() doesn't do a good enough job of ensuring that throughout the destruction process that no modesettings can be done with the connectors. As it is right now, intel_dp_destroy_mst_connector() works like this: * Take all modeset locks * Clear the configuration of the crtc on the connector, if there is one * Drop all modeset locks, this is required because of circular dependency issues that arise with trying to remove the connector from sysfs with modeset locks held * Unregister the connector * Take all modeset locks, again * Do the rest of the required cleaning for destroying the connector * Finally drop all modeset locks for good This only works sometimes. During the destruction process, it's very possible that a userspace application will attempt to do a modesetting using the connector. When we drop the modeset locks, an ioctl handler such as drm_mode_setcrtc has the oppurtunity to take all of the modeset locks from us. When this happens, one thing leads to another and eventually we end up committing a mode with the non-existent connector: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi And in some cases, such as with the T460s using an MST dock, this results in breaking modesetting and/or panicking the system. To work around this, we now unregister the connector at the very beginning of intel_dp_destroy_mst_connector(), grab all the modesetting locks, and then hold them until we finish the rest of the function. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Rob Clark <rclark@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458155884-13877-1-git-send-email-cpaul@redhat.com
2016-03-17 03:18:04 +08:00
if (dev_priv->fbdev)
drm_fb_helper_remove_one_connector(&dev_priv->fbdev->helper,
connector);
/* prevent race with the check in ->detect */
drm_modeset_lock(&connector->dev->mode_config.connection_mutex, NULL);
intel_connector->mst_port = NULL;
drm_modeset_unlock(&connector->dev->mode_config.connection_mutex);
2014-05-02 12:02:48 +08:00
drm_connector_put(connector);
2014-05-02 12:02:48 +08:00
}
static void intel_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
{
struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
drm_kms_helper_hotplug_event(dev);
}
static const struct drm_dp_mst_topology_cbs mst_cbs = {
2014-05-02 12:02:48 +08:00
.add_connector = intel_dp_add_mst_connector,
.register_connector = intel_dp_register_mst_connector,
2014-05-02 12:02:48 +08:00
.destroy_connector = intel_dp_destroy_mst_connector,
.hotplug = intel_dp_mst_hotplug,
};
static struct intel_dp_mst_encoder *
intel_dp_create_fake_mst_encoder(struct intel_digital_port *intel_dig_port, enum pipe pipe)
{
struct intel_dp_mst_encoder *intel_mst;
struct intel_encoder *intel_encoder;
struct drm_device *dev = intel_dig_port->base.base.dev;
intel_mst = kzalloc(sizeof(*intel_mst), GFP_KERNEL);
if (!intel_mst)
return NULL;
intel_mst->pipe = pipe;
intel_encoder = &intel_mst->base;
intel_mst->primary = intel_dig_port;
drm_encoder_init(dev, &intel_encoder->base, &intel_dp_mst_enc_funcs,
DRM_MODE_ENCODER_DPMST, "DP-MST %c", pipe_name(pipe));
2014-05-02 12:02:48 +08:00
intel_encoder->type = INTEL_OUTPUT_DP_MST;
intel_encoder->power_domain = intel_dig_port->base.power_domain;
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 23:24:34 +08:00
intel_encoder->port = intel_dig_port->base.port;
2014-05-02 12:02:48 +08:00
intel_encoder->crtc_mask = 0x7;
intel_encoder->cloneable = 0;
intel_encoder->compute_config = intel_dp_mst_compute_config;
intel_encoder->disable = intel_mst_disable_dp;
intel_encoder->post_disable = intel_mst_post_disable_dp;
intel_encoder->pre_pll_enable = intel_mst_pre_pll_enable_dp;
2014-05-02 12:02:48 +08:00
intel_encoder->pre_enable = intel_mst_pre_enable_dp;
intel_encoder->enable = intel_mst_enable_dp;
intel_encoder->get_hw_state = intel_dp_mst_enc_get_hw_state;
intel_encoder->get_config = intel_dp_mst_enc_get_config;
return intel_mst;
}
static bool
intel_dp_create_fake_mst_encoders(struct intel_digital_port *intel_dig_port)
{
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
enum pipe pipe;
2014-05-02 12:02:48 +08:00
for_each_pipe(dev_priv, pipe)
intel_dp->mst_encoders[pipe] = intel_dp_create_fake_mst_encoder(intel_dig_port, pipe);
2014-05-02 12:02:48 +08:00
return true;
}
int
intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_base_id)
{
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_device *dev = intel_dig_port->base.base.dev;
int ret;
intel_dp->can_mst = true;
intel_dp->mst_mgr.cbs = &mst_cbs;
/* create encoders */
intel_dp_create_fake_mst_encoders(intel_dig_port);
ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, dev,
&intel_dp->aux, 16, 3, conn_base_id);
2014-05-02 12:02:48 +08:00
if (ret) {
intel_dp->can_mst = false;
return ret;
}
return 0;
}
void
intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port)
{
struct intel_dp *intel_dp = &intel_dig_port->dp;
if (!intel_dp->can_mst)
return;
drm_dp_mst_topology_mgr_destroy(&intel_dp->mst_mgr);
/* encoders will get killed by normal cleanup */
}