2019-01-22 02:05:50 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
2015-09-10 04:49:53 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2015 Microchip Technology
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mii.h>
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <linux/phy.h>
|
|
|
|
#include <linux/microchipphy.h>
|
2018-04-11 23:06:36 +08:00
|
|
|
#include <linux/delay.h>
|
2018-04-20 00:59:39 +08:00
|
|
|
#include <linux/of.h>
|
|
|
|
#include <dt-bindings/net/microchip-lan78xx.h>
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
|
|
|
|
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
|
|
|
|
|
|
|
|
struct lan88xx_priv {
|
|
|
|
int chip_id;
|
|
|
|
int chip_rev;
|
|
|
|
__u32 wolopts;
|
|
|
|
};
|
|
|
|
|
2018-04-11 23:06:36 +08:00
|
|
|
static int lan88xx_read_page(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int lan88xx_write_page(struct phy_device *phydev, int page)
|
|
|
|
{
|
|
|
|
return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
|
|
|
|
}
|
|
|
|
|
2015-09-10 04:49:53 +08:00
|
|
|
static int lan88xx_phy_config_intr(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
|
|
/* unmask all source and clear them before enable */
|
|
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
|
|
|
|
rc = phy_read(phydev, LAN88XX_INT_STS);
|
|
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK,
|
|
|
|
LAN88XX_INT_MASK_MDINTPIN_EN_ |
|
|
|
|
LAN88XX_INT_MASK_LINK_CHANGE_);
|
|
|
|
} else {
|
|
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
|
2020-11-14 00:52:12 +08:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
2015-09-10 04:49:53 +08:00
|
|
|
|
2020-11-14 00:52:12 +08:00
|
|
|
/* Ack interrupts after they have been disabled */
|
|
|
|
rc = phy_read(phydev, LAN88XX_INT_STS);
|
|
|
|
}
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
return rc < 0 ? rc : 0;
|
|
|
|
}
|
|
|
|
|
2020-11-14 00:52:11 +08:00
|
|
|
static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int irq_status;
|
|
|
|
|
|
|
|
irq_status = phy_read(phydev, LAN88XX_INT_STS);
|
|
|
|
if (irq_status < 0) {
|
|
|
|
phy_error(phydev);
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_))
|
|
|
|
return IRQ_NONE;
|
|
|
|
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2016-09-18 16:26:34 +08:00
|
|
|
static int lan88xx_suspend(struct phy_device *phydev)
|
2015-09-10 04:49:53 +08:00
|
|
|
{
|
|
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
|
|
|
|
/* do not power down PHY when WOL is enabled */
|
|
|
|
if (!priv->wolopts)
|
|
|
|
genphy_suspend(phydev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-04-11 23:06:36 +08:00
|
|
|
static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
|
|
|
|
u32 data)
|
|
|
|
{
|
|
|
|
int val, save_page, ret = 0;
|
|
|
|
u16 buf;
|
|
|
|
|
|
|
|
/* Save current page */
|
|
|
|
save_page = phy_save_page(phydev);
|
|
|
|
if (save_page < 0) {
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to get current page\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Switch to TR page */
|
|
|
|
lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
|
|
|
|
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
|
|
|
|
(data & 0xFFFF));
|
|
|
|
if (ret < 0) {
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to write TR low data\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
|
|
|
|
(data & 0x00FF0000) >> 16);
|
|
|
|
if (ret < 0) {
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to write TR high data\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Config control bits [15:13] of register */
|
|
|
|
buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
|
|
|
|
buf |= 0x8000; /* Set [15] to Packet transmit */
|
|
|
|
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
|
|
|
|
if (ret < 0) {
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to write data in reg\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
usleep_range(1000, 2000);/* Wait for Data to be written */
|
|
|
|
val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
|
|
|
|
if (!(val & 0x8000))
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
|
|
|
|
regaddr);
|
2018-04-11 23:06:36 +08:00
|
|
|
err:
|
|
|
|
return phy_restore_page(phydev, save_page, ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void lan88xx_config_TR_regs(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* Get access to Channel 0x1, Node 0xF , Register 0x01.
|
|
|
|
* Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
|
|
|
|
* MrvlTrFix1000Kp, MasterEnableTR bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x06.
|
|
|
|
* Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
|
|
|
|
* SSTrKp1000Mas bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1111, Register 0x11.
|
|
|
|
* Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
|
|
|
|
* bits
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x10.
|
|
|
|
* Write 24-bit value 0xEEFFDD to register. Setting
|
|
|
|
* eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
|
|
|
|
* eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x13.
|
|
|
|
* Write 24-bit value 0x071448 to register. Setting
|
|
|
|
* slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x12.
|
|
|
|
* Write 24-bit value 0x13132F to register. Setting
|
|
|
|
* slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x14.
|
|
|
|
* Write 24-bit value 0x0 to register. Setting eee_3level_delay,
|
|
|
|
* eee_TrKf_freeze_delay bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x34.
|
|
|
|
* Write 24-bit value 0x91B06C to register. Setting
|
|
|
|
* FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
|
|
|
|
* FastMseSearchUpdGain1000 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x3E.
|
|
|
|
* Write 24-bit value 0xC0A028 to register. Setting
|
|
|
|
* FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
|
|
|
|
* FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x35.
|
|
|
|
* Write 24-bit value 0x041600 to register. Setting
|
|
|
|
* FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
|
|
|
|
* FastMsePhChangeDelay1000 bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x03.
|
|
|
|
* Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
|
|
|
|
*/
|
|
|
|
err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
|
|
|
|
if (err < 0)
|
2018-09-30 05:04:10 +08:00
|
|
|
phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
|
2018-04-11 23:06:36 +08:00
|
|
|
}
|
|
|
|
|
2015-09-10 04:49:53 +08:00
|
|
|
static int lan88xx_probe(struct phy_device *phydev)
|
|
|
|
{
|
2016-01-07 03:11:16 +08:00
|
|
|
struct device *dev = &phydev->mdio.dev;
|
2015-09-10 04:49:53 +08:00
|
|
|
struct lan88xx_priv *priv;
|
2018-04-20 00:59:39 +08:00
|
|
|
u32 led_modes[4];
|
|
|
|
int len;
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv->wolopts = 0;
|
|
|
|
|
2018-04-20 00:59:39 +08:00
|
|
|
len = of_property_read_variable_u32_array(dev->of_node,
|
|
|
|
"microchip,led-modes",
|
|
|
|
led_modes,
|
|
|
|
0,
|
|
|
|
ARRAY_SIZE(led_modes));
|
|
|
|
if (len >= 0) {
|
|
|
|
u32 reg = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < len; i++) {
|
|
|
|
if (led_modes[i] > 15)
|
|
|
|
return -EINVAL;
|
|
|
|
reg |= led_modes[i] << (i * 4);
|
|
|
|
}
|
|
|
|
for (; i < ARRAY_SIZE(led_modes); i++)
|
|
|
|
reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
|
|
|
|
(void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
|
|
|
|
} else if (len == -EOVERFLOW) {
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2015-09-10 04:49:53 +08:00
|
|
|
/* these values can be used to identify internal PHY */
|
2017-03-22 00:36:53 +08:00
|
|
|
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
|
|
|
|
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
phydev->priv = priv;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void lan88xx_remove(struct phy_device *phydev)
|
|
|
|
{
|
2016-01-07 03:11:16 +08:00
|
|
|
struct device *dev = &phydev->mdio.dev;
|
2015-09-10 04:49:53 +08:00
|
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
|
|
|
|
if (priv)
|
|
|
|
devm_kfree(dev, priv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int lan88xx_set_wol(struct phy_device *phydev,
|
|
|
|
struct ethtool_wolinfo *wol)
|
|
|
|
{
|
|
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
|
|
|
|
priv->wolopts = wol->wolopts;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-11-18 06:10:02 +08:00
|
|
|
static void lan88xx_set_mdix(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int buf;
|
|
|
|
int val;
|
|
|
|
|
2016-11-29 17:46:49 +08:00
|
|
|
switch (phydev->mdix_ctrl) {
|
2016-11-18 06:10:02 +08:00
|
|
|
case ETH_TP_MDI:
|
|
|
|
val = LAN88XX_EXT_MODE_CTRL_MDI_;
|
|
|
|
break;
|
|
|
|
case ETH_TP_MDI_X:
|
|
|
|
val = LAN88XX_EXT_MODE_CTRL_MDI_X_;
|
|
|
|
break;
|
|
|
|
case ETH_TP_MDI_AUTO:
|
|
|
|
val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1);
|
|
|
|
buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL);
|
|
|
|
buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_;
|
|
|
|
buf |= val;
|
|
|
|
phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf);
|
|
|
|
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
|
|
|
|
}
|
|
|
|
|
2018-04-11 23:06:36 +08:00
|
|
|
static int lan88xx_config_init(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int val;
|
|
|
|
|
|
|
|
/*Zerodetect delay enable */
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS,
|
|
|
|
PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
|
|
|
|
val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
|
|
|
|
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
|
|
|
|
val);
|
|
|
|
|
|
|
|
/* Config DSP registers */
|
|
|
|
lan88xx_config_TR_regs(phydev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-11-18 06:10:02 +08:00
|
|
|
static int lan88xx_config_aneg(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
lan88xx_set_mdix(phydev);
|
|
|
|
|
|
|
|
return genphy_config_aneg(phydev);
|
|
|
|
}
|
|
|
|
|
2023-03-01 23:43:07 +08:00
|
|
|
static void lan88xx_link_change_notify(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int temp;
|
|
|
|
|
|
|
|
/* At forced 100 F/H mode, chip may fail to set mode correctly
|
|
|
|
* when cable is switched between long(~50+m) and short one.
|
|
|
|
* As workaround, set to 10 before setting to 100
|
|
|
|
* at forced 100 F/H mode.
|
|
|
|
*/
|
|
|
|
if (!phydev->autoneg && phydev->speed == 100) {
|
|
|
|
/* disable phy interrupt */
|
|
|
|
temp = phy_read(phydev, LAN88XX_INT_MASK);
|
|
|
|
temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
|
|
|
|
phy_write(phydev, LAN88XX_INT_MASK, temp);
|
|
|
|
|
|
|
|
temp = phy_read(phydev, MII_BMCR);
|
|
|
|
temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
|
|
|
|
phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
|
|
|
|
temp |= BMCR_SPEED100;
|
|
|
|
phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
|
|
|
|
|
|
|
|
/* clear pending interrupt generated while workaround */
|
|
|
|
temp = phy_read(phydev, LAN88XX_INT_STS);
|
|
|
|
|
|
|
|
/* enable phy interrupt back */
|
|
|
|
temp = phy_read(phydev, LAN88XX_INT_MASK);
|
|
|
|
temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
|
|
|
|
phy_write(phydev, LAN88XX_INT_MASK, temp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-09-10 04:49:53 +08:00
|
|
|
static struct phy_driver microchip_phy_driver[] = {
|
|
|
|
{
|
2022-05-06 02:12:51 +08:00
|
|
|
.phy_id = 0x0007c132,
|
2022-05-10 02:58:03 +08:00
|
|
|
/* This mask (0xfffffff2) is to differentiate from
|
|
|
|
* LAN8742 (phy_id 0x0007c130 and 0x0007c131)
|
|
|
|
* and allows future phy_id revisions.
|
|
|
|
*/
|
2022-05-06 02:12:51 +08:00
|
|
|
.phy_id_mask = 0xfffffff2,
|
2015-09-10 04:49:53 +08:00
|
|
|
.name = "Microchip LAN88xx",
|
|
|
|
|
2019-04-13 02:47:03 +08:00
|
|
|
/* PHY_GBIT_FEATURES */
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
.probe = lan88xx_probe,
|
|
|
|
.remove = lan88xx_remove,
|
|
|
|
|
2018-04-11 23:06:36 +08:00
|
|
|
.config_init = lan88xx_config_init,
|
2016-11-18 06:10:02 +08:00
|
|
|
.config_aneg = lan88xx_config_aneg,
|
2023-03-01 23:43:07 +08:00
|
|
|
.link_change_notify = lan88xx_link_change_notify,
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
.config_intr = lan88xx_phy_config_intr,
|
2020-11-14 00:52:11 +08:00
|
|
|
.handle_interrupt = lan88xx_handle_interrupt,
|
2015-09-10 04:49:53 +08:00
|
|
|
|
|
|
|
.suspend = lan88xx_suspend,
|
|
|
|
.resume = genphy_resume,
|
|
|
|
.set_wol = lan88xx_set_wol,
|
2018-04-11 23:06:36 +08:00
|
|
|
.read_page = lan88xx_read_page,
|
|
|
|
.write_page = lan88xx_write_page,
|
2015-09-10 04:49:53 +08:00
|
|
|
} };
|
|
|
|
|
|
|
|
module_phy_driver(microchip_phy_driver);
|
|
|
|
|
|
|
|
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
|
2022-05-06 02:12:51 +08:00
|
|
|
{ 0x0007c132, 0xfffffff2 },
|
2015-09-10 04:49:53 +08:00
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(mdio, microchip_tbl);
|
|
|
|
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
|
|
MODULE_LICENSE("GPL");
|