OpenCloudOS-Kernel/drivers/net/ethernet/cavium/liquidio/lio_main.c

3666 lines
93 KiB
C
Raw Normal View History

Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/crc32.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/ip.h>
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
#include <net/ip.h>
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
#include <linux/ipv6.h>
#include <linux/net_tstamp.h>
#include <linux/if_vlan.h>
#include <linux/firmware.h>
#include <linux/ethtool.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include "octeon_config.h"
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "octeon_nic.h"
#include "octeon_main.h"
#include "octeon_network.h"
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "cn68xx_regs.h"
#include "cn68xx_device.h"
#include "liquidio_image.h"
MODULE_AUTHOR("Cavium Networks, <support@cavium.com>");
MODULE_DESCRIPTION("Cavium LiquidIO Intelligent Server Adapter Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(LIQUIDIO_VERSION);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210SV_NAME LIO_FW_NAME_SUFFIX);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210NV_NAME LIO_FW_NAME_SUFFIX);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_410NV_NAME LIO_FW_NAME_SUFFIX);
static int ddr_timeout = 10000;
module_param(ddr_timeout, int, 0644);
MODULE_PARM_DESC(ddr_timeout,
"Number of milliseconds to wait for DDR initialization. 0 waits for ddr_timeout to be set to non-zero value before starting to check");
static u32 console_bitmask;
module_param(console_bitmask, int, 0644);
MODULE_PARM_DESC(console_bitmask,
"Bitmask indicating which consoles have debug output redirected to syslog.");
#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
static int debug = -1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "NETIF_MSG debug bits");
static char fw_type[LIO_MAX_FW_TYPE_LEN];
module_param_string(fw_type, fw_type, sizeof(fw_type), 0000);
MODULE_PARM_DESC(fw_type, "Type of firmware to be loaded. Default \"nic\"");
static int conf_type;
module_param(conf_type, int, 0);
MODULE_PARM_DESC(conf_type, "select octeon configuration 0 default 1 ovs");
/* Bit mask values for lio->ifstate */
#define LIO_IFSTATE_DROQ_OPS 0x01
#define LIO_IFSTATE_REGISTERED 0x02
#define LIO_IFSTATE_RUNNING 0x04
#define LIO_IFSTATE_RX_TIMESTAMP_ENABLED 0x08
/* Polling interval for determining when NIC application is alive */
#define LIQUIDIO_STARTER_POLL_INTERVAL_MS 100
/* runtime link query interval */
#define LIQUIDIO_LINK_QUERY_INTERVAL_MS 1000
struct liquidio_if_cfg_context {
int octeon_id;
wait_queue_head_t wc;
int cond;
};
struct liquidio_if_cfg_resp {
u64 rh;
struct liquidio_if_cfg_info cfg_info;
u64 status;
};
struct oct_link_status_resp {
u64 rh;
struct oct_link_info link_info;
u64 status;
};
struct oct_timestamp_resp {
u64 rh;
u64 timestamp;
u64 status;
};
#define OCT_TIMESTAMP_RESP_SIZE (sizeof(struct oct_timestamp_resp))
union tx_info {
u64 u64;
struct {
#ifdef __BIG_ENDIAN_BITFIELD
u16 gso_size;
u16 gso_segs;
u32 reserved;
#else
u32 reserved;
u16 gso_segs;
u16 gso_size;
#endif
} s;
};
/** Octeon device properties to be used by the NIC module.
* Each octeon device in the system will be represented
* by this structure in the NIC module.
*/
#define OCTNIC_MAX_SG (MAX_SKB_FRAGS)
#define OCTNIC_GSO_MAX_HEADER_SIZE 128
#define OCTNIC_GSO_MAX_SIZE (GSO_MAX_SIZE - OCTNIC_GSO_MAX_HEADER_SIZE)
/** Structure of a node in list of gather components maintained by
* NIC driver for each network device.
*/
struct octnic_gather {
/** List manipulation. Next and prev pointers. */
struct list_head list;
/** Size of the gather component at sg in bytes. */
int sg_size;
/** Number of bytes that sg was adjusted to make it 8B-aligned. */
int adjust;
/** Gather component that can accommodate max sized fragment list
* received from the IP layer.
*/
struct octeon_sg_entry *sg;
};
/** This structure is used by NIC driver to store information required
* to free the sk_buff when the packet has been fetched by Octeon.
* Bytes offset below assume worst-case of a 64-bit system.
*/
struct octnet_buf_free_info {
/** Bytes 1-8. Pointer to network device private structure. */
struct lio *lio;
/** Bytes 9-16. Pointer to sk_buff. */
struct sk_buff *skb;
/** Bytes 17-24. Pointer to gather list. */
struct octnic_gather *g;
/** Bytes 25-32. Physical address of skb->data or gather list. */
u64 dptr;
/** Bytes 33-47. Piggybacked soft command, if any */
struct octeon_soft_command *sc;
};
struct handshake {
struct completion init;
struct completion started;
struct pci_dev *pci_dev;
int init_ok;
int started_ok;
};
struct octeon_device_priv {
/** Tasklet structures for this device. */
struct tasklet_struct droq_tasklet;
unsigned long napi_mask;
};
static int octeon_device_init(struct octeon_device *);
static void liquidio_remove(struct pci_dev *pdev);
static int liquidio_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
static struct handshake handshake[MAX_OCTEON_DEVICES];
static struct completion first_stage;
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
static void octeon_droq_bh(unsigned long pdev)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
{
int q_no;
int reschedule = 0;
struct octeon_device *oct = (struct octeon_device *)pdev;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
/* for (q_no = 0; q_no < oct->num_oqs; q_no++) { */
for (q_no = 0; q_no < MAX_OCTEON_OUTPUT_QUEUES; q_no++) {
if (!(oct->io_qmask.oq & (1UL << q_no)))
continue;
reschedule |= octeon_droq_process_packets(oct, oct->droq[q_no],
MAX_PACKET_BUDGET);
}
if (reschedule)
tasklet_schedule(&oct_priv->droq_tasklet);
}
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
static int lio_wait_for_oq_pkts(struct octeon_device *oct)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
{
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
int retry = 100, pkt_cnt = 0, pending_pkts = 0;
int i;
do {
pending_pkts = 0;
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
if (!(oct->io_qmask.oq & (1UL << i)))
continue;
pkt_cnt += octeon_droq_check_hw_for_pkts(oct,
oct->droq[i]);
}
if (pkt_cnt > 0) {
pending_pkts += pkt_cnt;
tasklet_schedule(&oct_priv->droq_tasklet);
}
pkt_cnt = 0;
schedule_timeout_uninterruptible(1);
} while (retry-- && pending_pkts);
return pkt_cnt;
}
void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
unsigned int bytes_compl)
{
struct netdev_queue *netdev_queue = txq;
netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl);
}
void octeon_update_tx_completion_counters(void *buf, int reqtype,
unsigned int *pkts_compl,
unsigned int *bytes_compl)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb = NULL;
struct octeon_soft_command *sc;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
(*pkts_compl)++;
*bytes_compl += skb->len;
}
void octeon_report_sent_bytes_to_bql(void *buf, int reqtype)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct octeon_soft_command *sc;
struct netdev_queue *txq;
switch (reqtype) {
case REQTYPE_NORESP_NET:
case REQTYPE_NORESP_NET_SG:
finfo = buf;
skb = finfo->skb;
break;
case REQTYPE_RESP_NET_SG:
case REQTYPE_RESP_NET:
sc = buf;
skb = sc->callback_arg;
break;
default:
return;
}
txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb));
netdev_tx_sent_queue(txq, skb->len);
}
int octeon_console_debug_enabled(u32 console)
{
return (console_bitmask >> (console)) & 0x1;
}
/**
* \brief Forces all IO queues off on a given device
* @param oct Pointer to Octeon device
*/
static void force_io_queues_off(struct octeon_device *oct)
{
if ((oct->chip_id == OCTEON_CN66XX) ||
(oct->chip_id == OCTEON_CN68XX)) {
/* Reset the Enable bits for Input Queues. */
octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, 0);
/* Reset the Enable bits for Output Queues. */
octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, 0);
}
}
/**
* \brief wait for all pending requests to complete
* @param oct Pointer to Octeon device
*
* Called during shutdown sequence
*/
static int wait_for_pending_requests(struct octeon_device *oct)
{
int i, pcount = 0;
for (i = 0; i < 100; i++) {
pcount =
atomic_read(&oct->response_list
[OCTEON_ORDERED_SC_LIST].pending_req_count);
if (pcount)
schedule_timeout_uninterruptible(HZ / 10);
else
break;
}
if (pcount)
return 1;
return 0;
}
/**
* \brief Cause device to go quiet so it can be safely removed/reset/etc
* @param oct Pointer to Octeon device
*/
static inline void pcierror_quiesce_device(struct octeon_device *oct)
{
int i;
/* Disable the input and output queues now. No more packets will
* arrive from Octeon, but we should wait for all packet processing
* to finish.
*/
force_io_queues_off(oct);
/* To allow for in-flight requests */
schedule_timeout_uninterruptible(100);
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
/* Force all requests waiting to be fetched by OCTEON to complete. */
for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
struct octeon_instr_queue *iq;
if (!(oct->io_qmask.iq & (1UL << i)))
continue;
iq = oct->instr_queue[i];
if (atomic_read(&iq->instr_pending)) {
spin_lock_bh(&iq->lock);
iq->fill_cnt = 0;
iq->octeon_read_index = iq->host_write_index;
iq->stats.instr_processed +=
atomic_read(&iq->instr_pending);
lio_process_iq_request_list(oct, iq);
spin_unlock_bh(&iq->lock);
}
}
/* Force all pending ordered list requests to time out. */
lio_process_ordered_list(oct, 1);
/* We do not need to wait for output queue packets to be processed. */
}
/**
* \brief Cleanup PCI AER uncorrectable error status
* @param dev Pointer to PCI device
*/
static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
{
int pos = 0x100;
u32 status, mask;
pr_info("%s :\n", __func__);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
if (dev->error_state == pci_channel_io_normal)
status &= ~mask; /* Clear corresponding nonfatal bits */
else
status &= mask; /* Clear corresponding fatal bits */
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
}
/**
* \brief Stop all PCI IO to a given device
* @param dev Pointer to Octeon device
*/
static void stop_pci_io(struct octeon_device *oct)
{
/* No more instructions will be forwarded. */
atomic_set(&oct->status, OCT_DEV_IN_RESET);
pci_disable_device(oct->pci_dev);
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct->chip);
pcierror_quiesce_device(oct);
/* Release the interrupt line */
free_irq(oct->pci_dev->irq, oct);
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
lio_get_state_string(&oct->status));
/* cn63xx_cleanup_aer_uncorrect_error_status(oct->pci_dev); */
/* making it a common function for all OCTEON models */
cleanup_aer_uncorrect_error_status(oct->pci_dev);
}
/**
* \brief called when PCI error is detected
* @param pdev Pointer to PCI device
* @param state The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
*/
static pci_ers_result_t liquidio_pcie_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct octeon_device *oct = pci_get_drvdata(pdev);
/* Non-correctable Non-fatal errors */
if (state == pci_channel_io_normal) {
dev_err(&oct->pci_dev->dev, "Non-correctable non-fatal error reported:\n");
cleanup_aer_uncorrect_error_status(oct->pci_dev);
return PCI_ERS_RESULT_CAN_RECOVER;
}
/* Non-correctable Fatal errors */
dev_err(&oct->pci_dev->dev, "Non-correctable FATAL reported by PCI AER driver\n");
stop_pci_io(oct);
/* Always return a DISCONNECT. There is no support for recovery but only
* for a clean shutdown.
*/
return PCI_ERS_RESULT_DISCONNECT;
}
/**
* \brief mmio handler
* @param pdev Pointer to PCI device
*/
static pci_ers_result_t liquidio_pcie_mmio_enabled(struct pci_dev *pdev)
{
/* We should never hit this since we never ask for a reset for a Fatal
* Error. We always return DISCONNECT in io_error above.
* But play safe and return RECOVERED for now.
*/
return PCI_ERS_RESULT_RECOVERED;
}
/**
* \brief called after the pci bus has been reset.
* @param pdev Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot. Implementation
* resembles the first-half of the octeon_resume routine.
*/
static pci_ers_result_t liquidio_pcie_slot_reset(struct pci_dev *pdev)
{
/* We should never hit this since we never ask for a reset for a Fatal
* Error. We always return DISCONNECT in io_error above.
* But play safe and return RECOVERED for now.
*/
return PCI_ERS_RESULT_RECOVERED;
}
/**
* \brief called when traffic can start flowing again.
* @param pdev Pointer to PCI device
*
* This callback is called when the error recovery driver tells us that
* its OK to resume normal operation. Implementation resembles the
* second-half of the octeon_resume routine.
*/
static void liquidio_pcie_resume(struct pci_dev *pdev)
{
/* Nothing to be done here. */
}
#ifdef CONFIG_PM
/**
* \brief called when suspending
* @param pdev Pointer to PCI device
* @param state state to suspend to
*/
static int liquidio_suspend(struct pci_dev *pdev, pm_message_t state)
{
return 0;
}
/**
* \brief called when resuming
* @param pdev Pointer to PCI device
*/
static int liquidio_resume(struct pci_dev *pdev)
{
return 0;
}
#endif
/* For PCI-E Advanced Error Recovery (AER) Interface */
static const struct pci_error_handlers liquidio_err_handler = {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
.error_detected = liquidio_pcie_error_detected,
.mmio_enabled = liquidio_pcie_mmio_enabled,
.slot_reset = liquidio_pcie_slot_reset,
.resume = liquidio_pcie_resume,
};
static const struct pci_device_id liquidio_pci_tbl[] = {
{ /* 68xx */
PCI_VENDOR_ID_CAVIUM, 0x91, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{ /* 66xx */
PCI_VENDOR_ID_CAVIUM, 0x92, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{
0, 0, 0, 0, 0, 0, 0
}
};
MODULE_DEVICE_TABLE(pci, liquidio_pci_tbl);
static struct pci_driver liquidio_pci_driver = {
.name = "LiquidIO",
.id_table = liquidio_pci_tbl,
.probe = liquidio_probe,
.remove = liquidio_remove,
.err_handler = &liquidio_err_handler, /* For AER */
#ifdef CONFIG_PM
.suspend = liquidio_suspend,
.resume = liquidio_resume,
#endif
};
/**
* \brief register PCI driver
*/
static int liquidio_init_pci(void)
{
return pci_register_driver(&liquidio_pci_driver);
}
/**
* \brief unregister PCI driver
*/
static void liquidio_deinit_pci(void)
{
pci_unregister_driver(&liquidio_pci_driver);
}
/**
* \brief check interface state
* @param lio per-network private data
* @param state_flag flag state to check
*/
static inline int ifstate_check(struct lio *lio, int state_flag)
{
return atomic_read(&lio->ifstate) & state_flag;
}
/**
* \brief set interface state
* @param lio per-network private data
* @param state_flag flag state to set
*/
static inline void ifstate_set(struct lio *lio, int state_flag)
{
atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) | state_flag));
}
/**
* \brief clear interface state
* @param lio per-network private data
* @param state_flag flag state to clear
*/
static inline void ifstate_reset(struct lio *lio, int state_flag)
{
atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) & ~(state_flag)));
}
/**
* \brief Stop Tx queues
* @param netdev network device
*/
static inline void txqs_stop(struct net_device *netdev)
{
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++)
netif_stop_subqueue(netdev, i);
} else {
netif_stop_queue(netdev);
}
}
/**
* \brief Start Tx queues
* @param netdev network device
*/
static inline void txqs_start(struct net_device *netdev)
{
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++)
netif_start_subqueue(netdev, i);
} else {
netif_start_queue(netdev);
}
}
/**
* \brief Wake Tx queues
* @param netdev network device
*/
static inline void txqs_wake(struct net_device *netdev)
{
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++)
netif_wake_subqueue(netdev, i);
} else {
netif_wake_queue(netdev);
}
}
/**
* \brief Stop Tx queue
* @param netdev network device
*/
static void stop_txq(struct net_device *netdev)
{
txqs_stop(netdev);
}
/**
* \brief Start Tx queue
* @param netdev network device
*/
static void start_txq(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (lio->linfo.link.s.status) {
txqs_start(netdev);
return;
}
}
/**
* \brief Wake a queue
* @param netdev network device
* @param q which queue to wake
*/
static inline void wake_q(struct net_device *netdev, int q)
{
if (netif_is_multiqueue(netdev))
netif_wake_subqueue(netdev, q);
else
netif_wake_queue(netdev);
}
/**
* \brief Stop a queue
* @param netdev network device
* @param q which queue to stop
*/
static inline void stop_q(struct net_device *netdev, int q)
{
if (netif_is_multiqueue(netdev))
netif_stop_subqueue(netdev, q);
else
netif_stop_queue(netdev);
}
/**
* \brief Check Tx queue status, and take appropriate action
* @param lio per-network private data
* @returns 0 if full, number of queues woken up otherwise
*/
static inline int check_txq_status(struct lio *lio)
{
int ret_val = 0;
if (netif_is_multiqueue(lio->netdev)) {
int numqs = lio->netdev->num_tx_queues;
int q, iq = 0;
/* check each sub-queue state */
for (q = 0; q < numqs; q++) {
iq = lio->linfo.txpciq[q & (lio->linfo.num_txpciq - 1)];
if (octnet_iq_is_full(lio->oct_dev, iq))
continue;
wake_q(lio->netdev, q);
ret_val++;
}
} else {
if (octnet_iq_is_full(lio->oct_dev, lio->txq))
return 0;
wake_q(lio->netdev, lio->txq);
ret_val = 1;
}
return ret_val;
}
/**
* Remove the node at the head of the list. The list would be empty at
* the end of this call if there are no more nodes in the list.
*/
static inline struct list_head *list_delete_head(struct list_head *root)
{
struct list_head *node;
if ((root->prev == root) && (root->next == root))
node = NULL;
else
node = root->next;
if (node)
list_del(node);
return node;
}
/**
* \brief Delete gather list
* @param lio per-network private data
*/
static void delete_glist(struct lio *lio)
{
struct octnic_gather *g;
do {
g = (struct octnic_gather *)
list_delete_head(&lio->glist);
if (g) {
if (g->sg)
kfree((void *)((unsigned long)g->sg -
g->adjust));
kfree(g);
}
} while (g);
}
/**
* \brief Setup gather list
* @param lio per-network private data
*/
static int setup_glist(struct lio *lio)
{
int i;
struct octnic_gather *g;
INIT_LIST_HEAD(&lio->glist);
for (i = 0; i < lio->tx_qsize; i++) {
g = kzalloc(sizeof(*g), GFP_KERNEL);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
if (!g)
break;
g->sg_size =
((ROUNDUP4(OCTNIC_MAX_SG) >> 2) * OCT_SG_ENTRY_SIZE);
g->sg = kmalloc(g->sg_size + 8, GFP_KERNEL);
if (!g->sg) {
kfree(g);
break;
}
/* The gather component should be aligned on 64-bit boundary */
if (((unsigned long)g->sg) & 7) {
g->adjust = 8 - (((unsigned long)g->sg) & 7);
g->sg = (struct octeon_sg_entry *)
((unsigned long)g->sg + g->adjust);
}
list_add_tail(&g->list, &lio->glist);
}
if (i == lio->tx_qsize)
return 0;
delete_glist(lio);
return 1;
}
/**
* \brief Print link information
* @param netdev network device
*/
static void print_link_info(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED) {
struct oct_link_info *linfo = &lio->linfo;
if (linfo->link.s.status) {
netif_info(lio, link, lio->netdev, "%d Mbps %s Duplex UP\n",
linfo->link.s.speed,
(linfo->link.s.duplex) ? "Full" : "Half");
} else {
netif_info(lio, link, lio->netdev, "Link Down\n");
}
}
}
/**
* \brief Update link status
* @param netdev network device
* @param ls link status structure
*
* Called on receipt of a link status response from the core application to
* update each interface's link status.
*/
static inline void update_link_status(struct net_device *netdev,
union oct_link_status *ls)
{
struct lio *lio = GET_LIO(netdev);
if ((lio->intf_open) && (lio->linfo.link.u64 != ls->u64)) {
lio->linfo.link.u64 = ls->u64;
print_link_info(netdev);
if (lio->linfo.link.s.status) {
netif_carrier_on(netdev);
/* start_txq(netdev); */
txqs_wake(netdev);
} else {
netif_carrier_off(netdev);
stop_txq(netdev);
}
}
}
/**
* \brief Droq packet processor sceduler
* @param oct octeon device
*/
static
void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
{
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
u64 oq_no;
struct octeon_droq *droq;
if (oct->int_status & OCT_DEV_INTR_PKT_DATA) {
for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES; oq_no++) {
if (!(oct->droq_intr & (1 << oq_no)))
continue;
droq = oct->droq[oq_no];
if (droq->ops.poll_mode) {
droq->ops.napi_fn(droq);
oct_priv->napi_mask |= (1 << oq_no);
} else {
tasklet_schedule(&oct_priv->droq_tasklet);
}
}
}
}
/**
* \brief Interrupt handler for octeon
* @param irq unused
* @param dev octeon device
*/
static
irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev)
{
struct octeon_device *oct = (struct octeon_device *)dev;
irqreturn_t ret;
/* Disable our interrupts for the duration of ISR */
oct->fn_list.disable_interrupt(oct->chip);
ret = oct->fn_list.process_interrupt_regs(oct);
if (ret == IRQ_HANDLED)
liquidio_schedule_droq_pkt_handlers(oct);
/* Re-enable our interrupts */
if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET))
oct->fn_list.enable_interrupt(oct->chip);
return ret;
}
/**
* \brief Setup interrupt for octeon device
* @param oct octeon device
*
* Enable interrupt in Octeon device as given in the PCI interrupt mask.
*/
static int octeon_setup_interrupt(struct octeon_device *oct)
{
int irqret, err;
err = pci_enable_msi(oct->pci_dev);
if (err)
dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n",
err);
else
oct->flags |= LIO_FLAG_MSI_ENABLED;
irqret = request_irq(oct->pci_dev->irq, liquidio_intr_handler,
IRQF_SHARED, "octeon", oct);
if (irqret) {
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n",
irqret);
return 1;
}
return 0;
}
/**
* \brief PCI probe handler
* @param pdev PCI device structure
* @param ent unused
*/
static int liquidio_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct octeon_device *oct_dev = NULL;
struct handshake *hs;
oct_dev = octeon_allocate_device(pdev->device,
sizeof(struct octeon_device_priv));
if (!oct_dev) {
dev_err(&pdev->dev, "Unable to allocate device\n");
return -ENOMEM;
}
dev_info(&pdev->dev, "Initializing device %x:%x.\n",
(u32)pdev->vendor, (u32)pdev->device);
/* Assign octeon_device for this device to the private data area. */
pci_set_drvdata(pdev, oct_dev);
/* set linux specific device pointer */
oct_dev->pci_dev = (void *)pdev;
hs = &handshake[oct_dev->octeon_id];
init_completion(&hs->init);
init_completion(&hs->started);
hs->pci_dev = pdev;
if (oct_dev->octeon_id == 0)
/* first LiquidIO NIC is detected */
complete(&first_stage);
if (octeon_device_init(oct_dev)) {
liquidio_remove(pdev);
return -ENOMEM;
}
dev_dbg(&oct_dev->pci_dev->dev, "Device is ready\n");
return 0;
}
/**
*\brief Destroy resources associated with octeon device
* @param pdev PCI device structure
* @param ent unused
*/
static void octeon_destroy_resources(struct octeon_device *oct)
{
int i;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct handshake *hs;
switch (atomic_read(&oct->status)) {
case OCT_DEV_RUNNING:
case OCT_DEV_CORE_OK:
/* No more instructions will be forwarded. */
atomic_set(&oct->status, OCT_DEV_IN_RESET);
oct->app_mode = CVM_DRV_INVALID_APP;
dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
lio_get_state_string(&oct->status));
schedule_timeout_uninterruptible(HZ / 10);
/* fallthrough */
case OCT_DEV_HOST_OK:
/* fallthrough */
case OCT_DEV_CONSOLE_INIT_DONE:
/* Remove any consoles */
octeon_remove_consoles(oct);
/* fallthrough */
case OCT_DEV_IO_QUEUES_DONE:
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
if (lio_wait_for_instr_fetch(oct))
dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n");
/* Disable the input and output queues now. No more packets will
* arrive from Octeon, but we should wait for all packet
* processing to finish.
*/
oct->fn_list.disable_io_queues(oct);
if (lio_wait_for_oq_pkts(oct))
dev_err(&oct->pci_dev->dev, "OQ had pending packets\n");
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct->chip);
/* Release the interrupt line */
free_irq(oct->pci_dev->irq, oct);
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
/* Soft reset the octeon device before exiting */
oct->fn_list.soft_reset(oct);
/* Disable the device, releasing the PCI INT */
pci_disable_device(oct->pci_dev);
/* fallthrough */
case OCT_DEV_IN_RESET:
case OCT_DEV_DROQ_INIT_DONE:
/*atomic_set(&oct->status, OCT_DEV_DROQ_INIT_DONE);*/
mdelay(100);
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
if (!(oct->io_qmask.oq & (1UL << i)))
continue;
octeon_delete_droq(oct, i);
}
/* Force any pending handshakes to complete */
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
handshake[oct->octeon_id].init_ok = 0;
complete(&handshake[oct->octeon_id].init);
handshake[oct->octeon_id].started_ok = 0;
complete(&handshake[oct->octeon_id].started);
}
}
/* fallthrough */
case OCT_DEV_RESP_LIST_INIT_DONE:
octeon_delete_response_list(oct);
/* fallthrough */
case OCT_DEV_SC_BUFF_POOL_INIT_DONE:
octeon_free_sc_buffer_pool(oct);
/* fallthrough */
case OCT_DEV_INSTR_QUEUE_INIT_DONE:
for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
if (!(oct->io_qmask.iq & (1UL << i)))
continue;
octeon_delete_instr_queue(oct, i);
}
/* fallthrough */
case OCT_DEV_DISPATCH_INIT_DONE:
octeon_delete_dispatch_list(oct);
cancel_delayed_work_sync(&oct->nic_poll_work.work);
/* fallthrough */
case OCT_DEV_PCI_MAP_DONE:
octeon_unmap_pci_barx(oct, 0);
octeon_unmap_pci_barx(oct, 1);
/* fallthrough */
case OCT_DEV_BEGIN_STATE:
/* Nothing to be done here either */
break;
} /* end switch(oct->status) */
tasklet_kill(&oct_priv->droq_tasklet);
}
/**
* \brief Send Rx control command
* @param lio per-network private data
* @param start_stop whether to start or stop
*/
static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
{
struct octnic_ctrl_pkt nctrl;
struct octnic_ctrl_params nparams;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.s.cmd = OCTNET_CMD_RX_CTL;
nctrl.ncmd.s.param1 = lio->linfo.ifidx;
nctrl.ncmd.s.param2 = start_stop;
nctrl.netpndev = (u64)lio->netdev;
nparams.resp_order = OCTEON_RESP_NORESPONSE;
if (octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams) < 0)
netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n");
}
/**
* \brief Destroy NIC device interface
* @param oct octeon device
* @param ifidx which interface to destroy
*
* Cleanup associated with each interface for an Octeon device when NIC
* module is being unloaded or if initialization fails during load.
*/
static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx)
{
struct net_device *netdev = oct->props[ifidx].netdev;
struct lio *lio;
if (!netdev) {
dev_err(&oct->pci_dev->dev, "%s No netdevice ptr for index %d\n",
__func__, ifidx);
return;
}
lio = GET_LIO(netdev);
dev_dbg(&oct->pci_dev->dev, "NIC device cleanup\n");
send_rx_ctrl_cmd(lio, 0);
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING)
txqs_stop(netdev);
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED)
unregister_netdev(netdev);
delete_glist(lio);
free_netdev(netdev);
oct->props[ifidx].netdev = NULL;
}
/**
* \brief Stop complete NIC functionality
* @param oct octeon device
*/
static int liquidio_stop_nic_module(struct octeon_device *oct)
{
int i, j;
struct lio *lio;
dev_dbg(&oct->pci_dev->dev, "Stopping network interfaces\n");
if (!oct->ifcount) {
dev_err(&oct->pci_dev->dev, "Init for Octeon was not completed\n");
return 1;
}
for (i = 0; i < oct->ifcount; i++) {
lio = GET_LIO(oct->props[i].netdev);
for (j = 0; j < lio->linfo.num_rxpciq; j++)
octeon_unregister_droq_ops(oct, lio->linfo.rxpciq[j]);
}
for (i = 0; i < oct->ifcount; i++)
liquidio_destroy_nic_device(oct, i);
dev_dbg(&oct->pci_dev->dev, "Network interfaces stopped\n");
return 0;
}
/**
* \brief Cleans up resources at unload time
* @param pdev PCI device structure
*/
static void liquidio_remove(struct pci_dev *pdev)
{
struct octeon_device *oct_dev = pci_get_drvdata(pdev);
dev_dbg(&oct_dev->pci_dev->dev, "Stopping device\n");
if (oct_dev->app_mode && (oct_dev->app_mode == CVM_DRV_NIC_APP))
liquidio_stop_nic_module(oct_dev);
/* Reset the octeon device and cleanup all memory allocated for
* the octeon device by driver.
*/
octeon_destroy_resources(oct_dev);
dev_info(&oct_dev->pci_dev->dev, "Device removed\n");
/* This octeon device has been removed. Update the global
* data structure to reflect this. Free the device structure.
*/
octeon_free_device_mem(oct_dev);
}
/**
* \brief Identify the Octeon device and to map the BAR address space
* @param oct octeon device
*/
static int octeon_chip_specific_setup(struct octeon_device *oct)
{
u32 dev_id, rev_id;
int ret = 1;
pci_read_config_dword(oct->pci_dev, 0, &dev_id);
pci_read_config_dword(oct->pci_dev, 8, &rev_id);
oct->rev_id = rev_id & 0xff;
switch (dev_id) {
case OCTEON_CN68XX_PCIID:
oct->chip_id = OCTEON_CN68XX;
ret = lio_setup_cn68xx_octeon_device(oct);
break;
case OCTEON_CN66XX_PCIID:
oct->chip_id = OCTEON_CN66XX;
ret = lio_setup_cn66xx_octeon_device(oct);
break;
default:
dev_err(&oct->pci_dev->dev, "Unknown device found (dev_id: %x)\n",
dev_id);
}
if (!ret)
dev_info(&oct->pci_dev->dev, "CN68XX PASS%d.%d %s\n",
OCTEON_MAJOR_REV(oct),
OCTEON_MINOR_REV(oct),
octeon_get_conf(oct)->card_name);
return ret;
}
/**
* \brief PCI initialization for each Octeon device.
* @param oct octeon device
*/
static int octeon_pci_os_setup(struct octeon_device *oct)
{
/* setup PCI stuff first */
if (pci_enable_device(oct->pci_dev)) {
dev_err(&oct->pci_dev->dev, "pci_enable_device failed\n");
return 1;
}
if (dma_set_mask_and_coherent(&oct->pci_dev->dev, DMA_BIT_MASK(64))) {
dev_err(&oct->pci_dev->dev, "Unexpected DMA device capability\n");
return 1;
}
/* Enable PCI DMA Master. */
pci_set_master(oct->pci_dev);
return 0;
}
/**
* \brief Check Tx queue state for a given network buffer
* @param lio per-network private data
* @param skb network buffer
*/
static inline int check_txq_state(struct lio *lio, struct sk_buff *skb)
{
int q = 0, iq = 0;
if (netif_is_multiqueue(lio->netdev)) {
q = skb->queue_mapping;
iq = lio->linfo.txpciq[(q & (lio->linfo.num_txpciq - 1))];
} else {
iq = lio->txq;
}
if (octnet_iq_is_full(lio->oct_dev, iq))
return 0;
wake_q(lio->netdev, q);
return 1;
}
/**
* \brief Unmap and free network buffer
* @param buf buffer
*/
static void free_netbuf(void *buf)
{
struct sk_buff *skb;
struct octnet_buf_free_info *finfo;
struct lio *lio;
finfo = (struct octnet_buf_free_info *)buf;
skb = finfo->skb;
lio = finfo->lio;
dma_unmap_single(&lio->oct_dev->pci_dev->dev, finfo->dptr, skb->len,
DMA_TO_DEVICE);
check_txq_state(lio, skb);
recv_buffer_free((struct sk_buff *)skb);
}
/**
* \brief Unmap and free gather buffer
* @param buf buffer
*/
static void free_netsgbuf(void *buf)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct lio *lio;
struct octnic_gather *g;
int i, frags;
finfo = (struct octnet_buf_free_info *)buf;
skb = finfo->skb;
lio = finfo->lio;
g = finfo->g;
frags = skb_shinfo(skb)->nr_frags;
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
g->sg[0].ptr[0], (skb->len - skb->data_len),
DMA_TO_DEVICE);
i = 1;
while (frags--) {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
pci_unmap_page((lio->oct_dev)->pci_dev,
g->sg[(i >> 2)].ptr[(i & 3)],
frag->size, DMA_TO_DEVICE);
i++;
}
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
finfo->dptr, g->sg_size,
DMA_TO_DEVICE);
spin_lock(&lio->lock);
list_add_tail(&g->list, &lio->glist);
spin_unlock(&lio->lock);
check_txq_state(lio, skb); /* mq support: sub-queue state check */
recv_buffer_free((struct sk_buff *)skb);
}
/**
* \brief Unmap and free gather buffer with response
* @param buf buffer
*/
static void free_netsgbuf_with_resp(void *buf)
{
struct octeon_soft_command *sc;
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct lio *lio;
struct octnic_gather *g;
int i, frags;
sc = (struct octeon_soft_command *)buf;
skb = (struct sk_buff *)sc->callback_arg;
finfo = (struct octnet_buf_free_info *)&skb->cb;
lio = finfo->lio;
g = finfo->g;
frags = skb_shinfo(skb)->nr_frags;
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
g->sg[0].ptr[0], (skb->len - skb->data_len),
DMA_TO_DEVICE);
i = 1;
while (frags--) {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
pci_unmap_page((lio->oct_dev)->pci_dev,
g->sg[(i >> 2)].ptr[(i & 3)],
frag->size, DMA_TO_DEVICE);
i++;
}
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
finfo->dptr, g->sg_size,
DMA_TO_DEVICE);
spin_lock(&lio->lock);
list_add_tail(&g->list, &lio->glist);
spin_unlock(&lio->lock);
/* Don't free the skb yet */
check_txq_state(lio, skb);
}
/**
* \brief Adjust ptp frequency
* @param ptp PTP clock info
* @param ppb how much to adjust by, in parts-per-billion
*/
static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
{
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
u64 comp, delta;
unsigned long flags;
bool neg_adj = false;
if (ppb < 0) {
neg_adj = true;
ppb = -ppb;
}
/* The hardware adds the clock compensation value to the
* PTP clock on every coprocessor clock cycle, so we
* compute the delta in terms of coprocessor clocks.
*/
delta = (u64)ppb << 32;
do_div(delta, oct->coproc_clock_rate);
spin_lock_irqsave(&lio->ptp_lock, flags);
comp = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_COMP);
if (neg_adj)
comp -= delta;
else
comp += delta;
lio_pci_writeq(oct, comp, CN6XXX_MIO_PTP_CLOCK_COMP);
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Adjust ptp time
* @param ptp PTP clock info
* @param delta how much to adjust by, in nanosecs
*/
static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
spin_lock_irqsave(&lio->ptp_lock, flags);
lio->ptp_adjust += delta;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Get hardware clock time, including any adjustment
* @param ptp PTP clock info
* @param ts timespec
*/
static int liquidio_ptp_gettime(struct ptp_clock_info *ptp,
struct timespec64 *ts)
{
u64 ns;
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
spin_lock_irqsave(&lio->ptp_lock, flags);
ns = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_HI);
ns += lio->ptp_adjust;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
*ts = ns_to_timespec64(ns);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return 0;
}
/**
* \brief Set hardware clock time. Reset adjustment
* @param ptp PTP clock info
* @param ts timespec
*/
static int liquidio_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
u64 ns;
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
ns = timespec_to_ns(ts);
spin_lock_irqsave(&lio->ptp_lock, flags);
lio_pci_writeq(oct, ns, CN6XXX_MIO_PTP_CLOCK_HI);
lio->ptp_adjust = 0;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Check if PTP is enabled
* @param ptp PTP clock info
* @param rq request
* @param on is it on
*/
static int liquidio_ptp_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *rq, int on)
{
return -EOPNOTSUPP;
}
/**
* \brief Open PTP clock source
* @param netdev network device
*/
static void oct_ptp_open(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
spin_lock_init(&lio->ptp_lock);
snprintf(lio->ptp_info.name, 16, "%s", netdev->name);
lio->ptp_info.owner = THIS_MODULE;
lio->ptp_info.max_adj = 250000000;
lio->ptp_info.n_alarm = 0;
lio->ptp_info.n_ext_ts = 0;
lio->ptp_info.n_per_out = 0;
lio->ptp_info.pps = 0;
lio->ptp_info.adjfreq = liquidio_ptp_adjfreq;
lio->ptp_info.adjtime = liquidio_ptp_adjtime;
lio->ptp_info.gettime64 = liquidio_ptp_gettime;
lio->ptp_info.settime64 = liquidio_ptp_settime;
lio->ptp_info.enable = liquidio_ptp_enable;
lio->ptp_adjust = 0;
lio->ptp_clock = ptp_clock_register(&lio->ptp_info,
&oct->pci_dev->dev);
if (IS_ERR(lio->ptp_clock))
lio->ptp_clock = NULL;
}
/**
* \brief Init PTP clock
* @param oct octeon device
*/
static void liquidio_ptp_init(struct octeon_device *oct)
{
u64 clock_comp, cfg;
clock_comp = (u64)NSEC_PER_SEC << 32;
do_div(clock_comp, oct->coproc_clock_rate);
lio_pci_writeq(oct, clock_comp, CN6XXX_MIO_PTP_CLOCK_COMP);
/* Enable */
cfg = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_CFG);
lio_pci_writeq(oct, cfg | 0x01, CN6XXX_MIO_PTP_CLOCK_CFG);
}
/**
* \brief Load firmware to device
* @param oct octeon device
*
* Maps device to firmware filename, requests firmware, and downloads it
*/
static int load_firmware(struct octeon_device *oct)
{
int ret = 0;
const struct firmware *fw;
char fw_name[LIO_MAX_FW_FILENAME_LEN];
char *tmp_fw_type;
if (strncmp(fw_type, LIO_FW_NAME_TYPE_NONE,
sizeof(LIO_FW_NAME_TYPE_NONE)) == 0) {
dev_info(&oct->pci_dev->dev, "Skipping firmware load\n");
return ret;
}
if (fw_type[0] == '\0')
tmp_fw_type = LIO_FW_NAME_TYPE_NIC;
else
tmp_fw_type = fw_type;
sprintf(fw_name, "%s%s%s_%s%s", LIO_FW_DIR, LIO_FW_BASE_NAME,
octeon_get_conf(oct)->card_name, tmp_fw_type,
LIO_FW_NAME_SUFFIX);
ret = request_firmware(&fw, fw_name, &oct->pci_dev->dev);
if (ret) {
dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n.",
fw_name);
return ret;
}
ret = octeon_download_firmware(oct, fw->data, fw->size);
release_firmware(fw);
return ret;
}
/**
* \brief Setup output queue
* @param oct octeon device
* @param q_no which queue
* @param num_descs how many descriptors
* @param desc_size size of each descriptor
* @param app_ctx application context
*/
static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs,
int desc_size, void *app_ctx)
{
int ret_val = 0;
dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no);
/* droq creation and local register settings. */
ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx);
if (ret_val < 0)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
return ret_val;
if (ret_val == 1) {
dev_dbg(&oct->pci_dev->dev, "Using default droq %d\n", q_no);
return 0;
}
/* tasklet creation for the droq */
/* Enable the droq queues */
octeon_set_droq_pkt_op(oct, q_no, 1);
/* Send Credit for Octeon Output queues. Credits are always
* sent after the output queue is enabled.
*/
writel(oct->droq[q_no]->max_count,
oct->droq[q_no]->pkts_credit_reg);
return ret_val;
}
/**
* \brief Callback for getting interface configuration
* @param status status of request
* @param buf pointer to resp structure
*/
static void if_cfg_callback(struct octeon_device *oct,
u32 status,
void *buf)
{
struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
struct liquidio_if_cfg_resp *resp;
struct liquidio_if_cfg_context *ctx;
resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
oct = lio_get_device(ctx->octeon_id);
if (resp->status)
dev_err(&oct->pci_dev->dev, "nic if cfg instruction failed. Status: %llx\n",
CVM_CAST64(resp->status));
ACCESS_ONCE(ctx->cond) = 1;
/* This barrier is required to be sure that the response has been
* written fully before waking up the handler
*/
wmb();
wake_up_interruptible(&ctx->wc);
}
/**
* \brief Select queue based on hash
* @param dev Net device
* @param skb sk_buff structure
* @returns selected queue number
*/
static u16 select_q(struct net_device *dev, struct sk_buff *skb,
void *accel_priv, select_queue_fallback_t fallback)
{
int qindex;
struct lio *lio;
lio = GET_LIO(dev);
/* select queue on chosen queue_mapping or core */
qindex = skb_rx_queue_recorded(skb) ?
skb_get_rx_queue(skb) : smp_processor_id();
return (u16)(qindex & (lio->linfo.num_txpciq - 1));
}
/** Routine to push packets arriving on Octeon interface upto network layer.
* @param oct_id - octeon device id.
* @param skbuff - skbuff struct to be passed to network layer.
* @param len - size of total data received.
* @param rh - Control header associated with the packet
* @param param - additional control data with the packet
*/
static void
liquidio_push_packet(u32 octeon_id,
void *skbuff,
u32 len,
union octeon_rh *rh,
void *param)
{
struct napi_struct *napi = param;
struct octeon_device *oct = lio_get_device(octeon_id);
struct sk_buff *skb = (struct sk_buff *)skbuff;
struct skb_shared_hwtstamps *shhwtstamps;
u64 ns;
struct net_device *netdev =
(struct net_device *)oct->props[rh->r_dh.link].netdev;
struct octeon_droq *droq = container_of(param, struct octeon_droq,
napi);
if (netdev) {
int packet_was_received;
struct lio *lio = GET_LIO(netdev);
/* Do not proceed if the interface is not in RUNNING state. */
if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) {
recv_buffer_free(skb);
droq->stats.rx_dropped++;
return;
}
skb->dev = netdev;
if (rh->r_dh.has_hwtstamp) {
/* timestamp is included from the hardware at the
* beginning of the packet.
*/
if (ifstate_check(lio,
LIO_IFSTATE_RX_TIMESTAMP_ENABLED)) {
/* Nanoseconds are in the first 64-bits
* of the packet.
*/
memcpy(&ns, (skb->data), sizeof(ns));
shhwtstamps = skb_hwtstamps(skb);
shhwtstamps->hwtstamp =
ns_to_ktime(ns + lio->ptp_adjust);
}
skb_pull(skb, sizeof(ns));
}
skb->protocol = eth_type_trans(skb, skb->dev);
if ((netdev->features & NETIF_F_RXCSUM) &&
(rh->r_dh.csum_verified == CNNIC_CSUM_VERIFIED))
/* checksum has already been verified */
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
packet_was_received = napi_gro_receive(napi, skb) != GRO_DROP;
if (packet_was_received) {
droq->stats.rx_bytes_received += len;
droq->stats.rx_pkts_received++;
netdev->last_rx = jiffies;
} else {
droq->stats.rx_dropped++;
netif_info(lio, rx_err, lio->netdev,
"droq:%d error rx_dropped:%llu\n",
droq->q_no, droq->stats.rx_dropped);
}
} else {
recv_buffer_free(skb);
}
}
/**
* \brief wrapper for calling napi_schedule
* @param param parameters to pass to napi_schedule
*
* Used when scheduling on different CPUs
*/
static void napi_schedule_wrapper(void *param)
{
struct napi_struct *napi = param;
napi_schedule(napi);
}
/**
* \brief callback when receive interrupt occurs and we are in NAPI mode
* @param arg pointer to octeon output queue
*/
static void liquidio_napi_drv_callback(void *arg)
{
struct octeon_droq *droq = arg;
int this_cpu = smp_processor_id();
if (droq->cpu_id == this_cpu) {
napi_schedule(&droq->napi);
} else {
struct call_single_data *csd = &droq->csd;
csd->func = napi_schedule_wrapper;
csd->info = &droq->napi;
csd->flags = 0;
smp_call_function_single_async(droq->cpu_id, csd);
}
}
/**
* \brief Main NAPI poll function
* @param droq octeon output queue
* @param budget maximum number of items to process
*/
static int liquidio_napi_do_rx(struct octeon_droq *droq, int budget)
{
int work_done;
struct lio *lio = GET_LIO(droq->napi.dev);
struct octeon_device *oct = lio->oct_dev;
work_done = octeon_process_droq_poll_cmd(oct, droq->q_no,
POLL_EVENT_PROCESS_PKTS,
budget);
if (work_done < 0) {
netif_info(lio, rx_err, lio->netdev,
"Receive work_done < 0, rxq:%d\n", droq->q_no);
goto octnet_napi_finish;
}
if (work_done > budget)
dev_err(&oct->pci_dev->dev, ">>>> %s work_done: %d budget: %d\n",
__func__, work_done, budget);
return work_done;
octnet_napi_finish:
napi_complete(&droq->napi);
octeon_process_droq_poll_cmd(oct, droq->q_no, POLL_EVENT_ENABLE_INTR,
0);
return 0;
}
/**
* \brief Entry point for NAPI polling
* @param napi NAPI structure
* @param budget maximum number of items to process
*/
static int liquidio_napi_poll(struct napi_struct *napi, int budget)
{
struct octeon_droq *droq;
int work_done;
droq = container_of(napi, struct octeon_droq, napi);
work_done = liquidio_napi_do_rx(droq, budget);
if (work_done < budget) {
napi_complete(napi);
octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no,
POLL_EVENT_ENABLE_INTR, 0);
return 0;
}
return work_done;
}
/**
* \brief Setup input and output queues
* @param octeon_dev octeon device
* @param net_device Net device
*
* Note: Queues are with respect to the octeon device. Thus
* an input queue is for egress packets, and output queues
* are for ingress packets.
*/
static inline int setup_io_queues(struct octeon_device *octeon_dev,
struct net_device *net_device)
{
static int first_time = 1;
static struct octeon_droq_ops droq_ops;
static int cpu_id;
static int cpu_id_modulus;
struct octeon_droq *droq;
struct napi_struct *napi;
int q, q_no, retval = 0;
struct lio *lio;
int num_tx_descs;
lio = GET_LIO(net_device);
if (first_time) {
first_time = 0;
memset(&droq_ops, 0, sizeof(struct octeon_droq_ops));
droq_ops.fptr = liquidio_push_packet;
droq_ops.poll_mode = 1;
droq_ops.napi_fn = liquidio_napi_drv_callback;
cpu_id = 0;
cpu_id_modulus = num_present_cpus();
}
/* set up DROQs. */
for (q = 0; q < lio->linfo.num_rxpciq; q++) {
q_no = lio->linfo.rxpciq[q];
retval = octeon_setup_droq(octeon_dev, q_no,
CFG_GET_NUM_RX_DESCS_NIC_IF
(octeon_get_conf(octeon_dev),
lio->ifidx),
CFG_GET_NUM_RX_BUF_SIZE_NIC_IF
(octeon_get_conf(octeon_dev),
lio->ifidx), NULL);
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
" %s : Runtime DROQ(RxQ) creation failed.\n",
__func__);
return 1;
}
droq = octeon_dev->droq[q_no];
napi = &droq->napi;
netif_napi_add(net_device, napi, liquidio_napi_poll, 64);
/* designate a CPU for this droq */
droq->cpu_id = cpu_id;
cpu_id++;
if (cpu_id >= cpu_id_modulus)
cpu_id = 0;
octeon_register_droq_ops(octeon_dev, q_no, &droq_ops);
}
/* set up IQs. */
for (q = 0; q < lio->linfo.num_txpciq; q++) {
num_tx_descs = CFG_GET_NUM_TX_DESCS_NIC_IF(octeon_get_conf
(octeon_dev),
lio->ifidx);
retval = octeon_setup_iq(octeon_dev, lio->linfo.txpciq[q],
num_tx_descs,
netdev_get_tx_queue(net_device, q));
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
" %s : Runtime IQ(TxQ) creation failed.\n",
__func__);
return 1;
}
}
return 0;
}
/**
* \brief Poll routine for checking transmit queue status
* @param work work_struct data structure
*/
static void octnet_poll_check_txq_status(struct work_struct *work)
{
struct cavium_wk *wk = (struct cavium_wk *)work;
struct lio *lio = (struct lio *)wk->ctxptr;
if (!ifstate_check(lio, LIO_IFSTATE_RUNNING))
return;
check_txq_status(lio);
queue_delayed_work(lio->txq_status_wq.wq,
&lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
}
/**
* \brief Sets up the txq poll check
* @param netdev network device
*/
static inline void setup_tx_poll_fn(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
lio->txq_status_wq.wq = create_workqueue("txq-status");
if (!lio->txq_status_wq.wq) {
dev_err(&oct->pci_dev->dev, "unable to create cavium txq status wq\n");
return;
}
INIT_DELAYED_WORK(&lio->txq_status_wq.wk.work,
octnet_poll_check_txq_status);
lio->txq_status_wq.wk.ctxptr = lio;
queue_delayed_work(lio->txq_status_wq.wq,
&lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
}
/**
* \brief Net device open for LiquidIO
* @param netdev network device
*/
static int liquidio_open(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct napi_struct *napi, *n;
list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
napi_enable(napi);
oct_ptp_open(netdev);
ifstate_set(lio, LIO_IFSTATE_RUNNING);
setup_tx_poll_fn(netdev);
start_txq(netdev);
netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
try_module_get(THIS_MODULE);
/* tell Octeon to start forwarding packets to host */
send_rx_ctrl_cmd(lio, 1);
/* Ready for link status updates */
lio->intf_open = 1;
dev_info(&oct->pci_dev->dev, "%s interface is opened\n",
netdev->name);
return 0;
}
/**
* \brief Net device stop for LiquidIO
* @param netdev network device
*/
static int liquidio_stop(struct net_device *netdev)
{
struct napi_struct *napi, *n;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n");
/* Inform that netif carrier is down */
lio->intf_open = 0;
lio->linfo.link.s.status = 0;
netif_carrier_off(netdev);
/* tell Octeon to stop forwarding packets to host */
send_rx_ctrl_cmd(lio, 0);
cancel_delayed_work_sync(&lio->txq_status_wq.wk.work);
flush_workqueue(lio->txq_status_wq.wq);
destroy_workqueue(lio->txq_status_wq.wq);
if (lio->ptp_clock) {
ptp_clock_unregister(lio->ptp_clock);
lio->ptp_clock = NULL;
}
ifstate_reset(lio, LIO_IFSTATE_RUNNING);
/* This is a hack that allows DHCP to continue working. */
set_bit(__LINK_STATE_START, &lio->netdev->state);
list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
napi_disable(napi);
txqs_stop(netdev);
dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);
module_put(THIS_MODULE);
return 0;
}
void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr)
{
struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr;
struct net_device *netdev = (struct net_device *)nctrl->netpndev;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
switch (nctrl->ncmd.s.cmd) {
case OCTNET_CMD_CHANGE_DEVFLAGS:
case OCTNET_CMD_SET_MULTI_LIST:
break;
case OCTNET_CMD_CHANGE_MACADDR:
/* If command is successful, change the MACADDR. */
netif_info(lio, probe, lio->netdev, " MACAddr changed to 0x%llx\n",
CVM_CAST64(nctrl->udd[0]));
dev_info(&oct->pci_dev->dev, "%s MACAddr changed to 0x%llx\n",
netdev->name, CVM_CAST64(nctrl->udd[0]));
memcpy(netdev->dev_addr, ((u8 *)&nctrl->udd[0]) + 2, ETH_ALEN);
break;
case OCTNET_CMD_CHANGE_MTU:
/* If command is successful, change the MTU. */
netif_info(lio, probe, lio->netdev, " MTU Changed from %d to %d\n",
netdev->mtu, nctrl->ncmd.s.param2);
dev_info(&oct->pci_dev->dev, "%s MTU Changed from %d to %d\n",
netdev->name, netdev->mtu,
nctrl->ncmd.s.param2);
netdev->mtu = nctrl->ncmd.s.param2;
break;
case OCTNET_CMD_GPIO_ACCESS:
netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n");
break;
case OCTNET_CMD_LRO_ENABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
break;
case OCTNET_CMD_LRO_DISABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
netdev->name);
break;
case OCTNET_CMD_VERBOSE_ENABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
break;
case OCTNET_CMD_VERBOSE_DISABLE:
dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
netdev->name);
break;
case OCTNET_CMD_SET_SETTINGS:
dev_info(&oct->pci_dev->dev, "%s settings changed\n",
netdev->name);
break;
default:
dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__,
nctrl->ncmd.s.cmd);
}
}
/**
* \brief Converts a mask based on net device flags
* @param netdev network device
*
* This routine generates a octnet_ifflags mask from the net device flags
* received from the OS.
*/
static inline enum octnet_ifflags get_new_flags(struct net_device *netdev)
{
enum octnet_ifflags f = OCTNET_IFFLAG_UNICAST;
if (netdev->flags & IFF_PROMISC)
f |= OCTNET_IFFLAG_PROMISC;
if (netdev->flags & IFF_ALLMULTI)
f |= OCTNET_IFFLAG_ALLMULTI;
if (netdev->flags & IFF_MULTICAST) {
f |= OCTNET_IFFLAG_MULTICAST;
/* Accept all multicast addresses if there are more than we
* can handle
*/
if (netdev_mc_count(netdev) > MAX_OCTEON_MULTICAST_ADDR)
f |= OCTNET_IFFLAG_ALLMULTI;
}
if (netdev->flags & IFF_BROADCAST)
f |= OCTNET_IFFLAG_BROADCAST;
return f;
}
/**
* \brief Net device set_multicast_list
* @param netdev network device
*/
static void liquidio_set_mcast_list(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
struct octnic_ctrl_params nparams;
struct netdev_hw_addr *ha;
u64 *mc;
int ret, i;
int mc_count = min(netdev_mc_count(netdev), MAX_OCTEON_MULTICAST_ADDR);
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
/* Create a ctrl pkt command to be sent to core app. */
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_SET_MULTI_LIST;
nctrl.ncmd.s.param1 = lio->linfo.ifidx;
nctrl.ncmd.s.param2 = get_new_flags(netdev);
nctrl.ncmd.s.param3 = mc_count;
nctrl.ncmd.s.more = mc_count;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
/* copy all the addresses into the udd */
i = 0;
mc = &nctrl.udd[0];
netdev_for_each_mc_addr(ha, netdev) {
*mc = 0;
memcpy(((u8 *)mc) + 2, ha->addr, ETH_ALEN);
/* no need to swap bytes */
if (++mc > &nctrl.udd[mc_count])
break;
}
/* Apparently, any activity in this call from the kernel has to
* be atomic. So we won't wait for response.
*/
nctrl.wait_time = 0;
nparams.resp_order = OCTEON_RESP_NORESPONSE;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "DEVFLAGS change failed in core (ret: 0x%x)\n",
ret);
}
}
/**
* \brief Net device set_mac_address
* @param netdev network device
*/
static int liquidio_set_mac(struct net_device *netdev, void *p)
{
int ret = 0;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct sockaddr *addr = (struct sockaddr *)p;
struct octnic_ctrl_pkt nctrl;
struct octnic_ctrl_params nparams;
if ((!is_valid_ether_addr(addr->sa_data)) ||
(ifstate_check(lio, LIO_IFSTATE_RUNNING)))
return -EADDRNOTAVAIL;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MACADDR;
nctrl.ncmd.s.param1 = lio->linfo.ifidx;
nctrl.ncmd.s.param2 = 0;
nctrl.ncmd.s.more = 1;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
nctrl.wait_time = 100;
nctrl.udd[0] = 0;
/* The MAC Address is presented in network byte order. */
memcpy((u8 *)&nctrl.udd[0] + 2, addr->sa_data, ETH_ALEN);
nparams.resp_order = OCTEON_RESP_ORDERED;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "MAC Address change failed\n");
return -ENOMEM;
}
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(((u8 *)&lio->linfo.hw_addr) + 2, addr->sa_data, ETH_ALEN);
return 0;
}
/**
* \brief Net device get_stats
* @param netdev network device
*/
static struct net_device_stats *liquidio_get_stats(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct net_device_stats *stats = &netdev->stats;
struct octeon_device *oct;
u64 pkts = 0, drop = 0, bytes = 0;
struct oct_droq_stats *oq_stats;
struct oct_iq_stats *iq_stats;
int i, iq_no, oq_no;
oct = lio->oct_dev;
for (i = 0; i < lio->linfo.num_txpciq; i++) {
iq_no = lio->linfo.txpciq[i];
iq_stats = &oct->instr_queue[iq_no]->stats;
pkts += iq_stats->tx_done;
drop += iq_stats->tx_dropped;
bytes += iq_stats->tx_tot_bytes;
}
stats->tx_packets = pkts;
stats->tx_bytes = bytes;
stats->tx_dropped = drop;
pkts = 0;
drop = 0;
bytes = 0;
for (i = 0; i < lio->linfo.num_rxpciq; i++) {
oq_no = lio->linfo.rxpciq[i];
oq_stats = &oct->droq[oq_no]->stats;
pkts += oq_stats->rx_pkts_received;
drop += (oq_stats->rx_dropped +
oq_stats->dropped_nodispatch +
oq_stats->dropped_toomany +
oq_stats->dropped_nomem);
bytes += oq_stats->rx_bytes_received;
}
stats->rx_bytes = bytes;
stats->rx_packets = pkts;
stats->rx_dropped = drop;
return stats;
}
/**
* \brief Net device change_mtu
* @param netdev network device
*/
static int liquidio_change_mtu(struct net_device *netdev, int new_mtu)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
struct octnic_ctrl_params nparams;
int max_frm_size = new_mtu + OCTNET_FRM_HEADER_SIZE;
int ret = 0;
/* Limit the MTU to make sure the ethernet packets are between 64 bytes
* and 65535 bytes
*/
if ((max_frm_size < OCTNET_MIN_FRM_SIZE) ||
(max_frm_size > OCTNET_MAX_FRM_SIZE)) {
dev_err(&oct->pci_dev->dev, "Invalid MTU: %d\n", new_mtu);
dev_err(&oct->pci_dev->dev, "Valid range %d and %d\n",
(OCTNET_MIN_FRM_SIZE - OCTNET_FRM_HEADER_SIZE),
(OCTNET_MAX_FRM_SIZE - OCTNET_FRM_HEADER_SIZE));
return -EINVAL;
}
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MTU;
nctrl.ncmd.s.param1 = lio->linfo.ifidx;
nctrl.ncmd.s.param2 = new_mtu;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
nparams.resp_order = OCTEON_RESP_ORDERED;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Failed to set MTU\n");
return -1;
}
lio->mtu = new_mtu;
return 0;
}
/**
* \brief Handler for SIOCSHWTSTAMP ioctl
* @param netdev network device
* @param ifr interface request
* @param cmd command
*/
static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
struct hwtstamp_config conf;
struct lio *lio = GET_LIO(netdev);
if (copy_from_user(&conf, ifr->ifr_data, sizeof(conf)))
return -EFAULT;
if (conf.flags)
return -EINVAL;
switch (conf.tx_type) {
case HWTSTAMP_TX_ON:
case HWTSTAMP_TX_OFF:
break;
default:
return -ERANGE;
}
switch (conf.rx_filter) {
case HWTSTAMP_FILTER_NONE:
break;
case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_SOME:
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
conf.rx_filter = HWTSTAMP_FILTER_ALL;
break;
default:
return -ERANGE;
}
if (conf.rx_filter == HWTSTAMP_FILTER_ALL)
ifstate_set(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
else
ifstate_reset(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
return copy_to_user(ifr->ifr_data, &conf, sizeof(conf)) ? -EFAULT : 0;
}
/**
* \brief ioctl handler
* @param netdev network device
* @param ifr interface request
* @param cmd command
*/
static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
case SIOCSHWTSTAMP:
return hwtstamp_ioctl(netdev, ifr, cmd);
default:
return -EOPNOTSUPP;
}
}
/**
* \brief handle a Tx timestamp response
* @param status response status
* @param buf pointer to skb
*/
static void handle_timestamp(struct octeon_device *oct,
u32 status,
void *buf)
{
struct octnet_buf_free_info *finfo;
struct octeon_soft_command *sc;
struct oct_timestamp_resp *resp;
struct lio *lio;
struct sk_buff *skb = (struct sk_buff *)buf;
finfo = (struct octnet_buf_free_info *)skb->cb;
lio = finfo->lio;
sc = finfo->sc;
oct = lio->oct_dev;
resp = (struct oct_timestamp_resp *)sc->virtrptr;
if (status != OCTEON_REQUEST_DONE) {
dev_err(&oct->pci_dev->dev, "Tx timestamp instruction failed. Status: %llx\n",
CVM_CAST64(status));
resp->timestamp = 0;
}
octeon_swap_8B_data(&resp->timestamp, 1);
if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) != 0)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
struct skb_shared_hwtstamps ts;
u64 ns = resp->timestamp;
netif_info(lio, tx_done, lio->netdev,
"Got resulting SKBTX_HW_TSTAMP skb=%p ns=%016llu\n",
skb, (unsigned long long)ns);
ts.hwtstamp = ns_to_ktime(ns + lio->ptp_adjust);
skb_tstamp_tx(skb, &ts);
}
octeon_free_soft_command(oct, sc);
recv_buffer_free(skb);
}
/* \brief Send a data packet that will be timestamped
* @param oct octeon device
* @param ndata pointer to network data
* @param finfo pointer to private network data
*/
static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
struct octnic_data_pkt *ndata,
struct octnet_buf_free_info *finfo,
int xmit_more)
{
int retval;
struct octeon_soft_command *sc;
struct octeon_instr_ih *ih;
struct octeon_instr_rdp *rdp;
struct lio *lio;
int ring_doorbell;
lio = finfo->lio;
sc = octeon_alloc_soft_command_resp(oct, &ndata->cmd,
sizeof(struct oct_timestamp_resp));
finfo->sc = sc;
if (!sc) {
dev_err(&oct->pci_dev->dev, "No memory for timestamped data packet\n");
return IQ_SEND_FAILED;
}
if (ndata->reqtype == REQTYPE_NORESP_NET)
ndata->reqtype = REQTYPE_RESP_NET;
else if (ndata->reqtype == REQTYPE_NORESP_NET_SG)
ndata->reqtype = REQTYPE_RESP_NET_SG;
sc->callback = handle_timestamp;
sc->callback_arg = finfo->skb;
sc->iq_no = ndata->q_no;
ih = (struct octeon_instr_ih *)&sc->cmd.ih;
rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
ring_doorbell = !xmit_more;
retval = octeon_send_command(oct, sc->iq_no, ring_doorbell, &sc->cmd,
sc, ih->dlengsz, ndata->reqtype);
if (retval) {
dev_err(&oct->pci_dev->dev, "timestamp data packet failed status: %x\n",
retval);
octeon_free_soft_command(oct, sc);
} else {
netif_info(lio, tx_queued, lio->netdev, "Queued timestamp packet\n");
}
return retval;
}
static inline int is_ipv4(struct sk_buff *skb)
{
return (skb->protocol == htons(ETH_P_IP)) &&
(ip_hdr(skb)->version == 4);
}
static inline int is_vlan(struct sk_buff *skb)
{
return skb->protocol == htons(ETH_P_8021Q);
}
static inline int is_ip_fragmented(struct sk_buff *skb)
{
/* The Don't fragment and Reserved flag fields are ignored.
* IP is fragmented if
* - the More fragments bit is set (indicating this IP is a fragment
* with more to follow; the current offset could be 0 ).
* - ths offset field is non-zero.
*/
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
return (ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ? 1 : 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
}
static inline int is_ipv6(struct sk_buff *skb)
{
return (skb->protocol == htons(ETH_P_IPV6)) &&
(ipv6_hdr(skb)->version == 6);
}
static inline int is_with_extn_hdr(struct sk_buff *skb)
{
return (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP) &&
(ipv6_hdr(skb)->nexthdr != IPPROTO_UDP);
}
static inline int is_tcpudp(struct sk_buff *skb)
{
return (ip_hdr(skb)->protocol == IPPROTO_TCP) ||
(ip_hdr(skb)->protocol == IPPROTO_UDP);
}
static inline u32 get_ipv4_5tuple_tag(struct sk_buff *skb)
{
u32 tag;
struct iphdr *iphdr = ip_hdr(skb);
tag = crc32(0, &iphdr->protocol, 1);
tag = crc32(tag, (u8 *)&iphdr->saddr, 8);
tag = crc32(tag, skb_transport_header(skb), 4);
return tag;
}
static inline u32 get_ipv6_5tuple_tag(struct sk_buff *skb)
{
u32 tag;
struct ipv6hdr *ipv6hdr = ipv6_hdr(skb);
tag = crc32(0, &ipv6hdr->nexthdr, 1);
tag = crc32(tag, (u8 *)&ipv6hdr->saddr, 32);
tag = crc32(tag, skb_transport_header(skb), 4);
return tag;
}
/** \brief Transmit networks packets to the Octeon interface
* @param skbuff skbuff struct to be passed to network layer.
* @param netdev pointer to network device
* @returns whether the packet was transmitted to the device okay or not
* (NETDEV_TX_OK or NETDEV_TX_BUSY)
*/
static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct lio *lio;
struct octnet_buf_free_info *finfo;
union octnic_cmd_setup cmdsetup;
struct octnic_data_pkt ndata;
struct octeon_device *oct;
struct oct_iq_stats *stats;
int cpu = 0, status = 0;
int q_idx = 0, iq_no = 0;
int xmit_more;
u32 tag = 0;
lio = GET_LIO(netdev);
oct = lio->oct_dev;
if (netif_is_multiqueue(netdev)) {
cpu = skb->queue_mapping;
q_idx = (cpu & (lio->linfo.num_txpciq - 1));
iq_no = lio->linfo.txpciq[q_idx];
} else {
iq_no = lio->txq;
}
stats = &oct->instr_queue[iq_no]->stats;
/* Check for all conditions in which the current packet cannot be
* transmitted.
*/
if (!(atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING) ||
(!lio->linfo.link.s.status) ||
(skb->len <= 0)) {
netif_info(lio, tx_err, lio->netdev,
"Transmit failed link_status : %d\n",
lio->linfo.link.s.status);
goto lio_xmit_failed;
}
/* Use space in skb->cb to store info used to unmap and
* free the buffers.
*/
finfo = (struct octnet_buf_free_info *)skb->cb;
finfo->lio = lio;
finfo->skb = skb;
finfo->sc = NULL;
/* Prepare the attributes for the data to be passed to OSI. */
memset(&ndata, 0, sizeof(struct octnic_data_pkt));
ndata.buf = (void *)finfo;
ndata.q_no = iq_no;
if (netif_is_multiqueue(netdev)) {
if (octnet_iq_is_full(oct, ndata.q_no)) {
/* defer sending if queue is full */
netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
ndata.q_no);
stats->tx_iq_busy++;
return NETDEV_TX_BUSY;
}
} else {
if (octnet_iq_is_full(oct, lio->txq)) {
/* defer sending if queue is full */
stats->tx_iq_busy++;
netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
ndata.q_no);
return NETDEV_TX_BUSY;
}
}
/* pr_info(" XMIT - valid Qs: %d, 1st Q no: %d, cpu: %d, q_no:%d\n",
* lio->linfo.num_txpciq, lio->txq, cpu, ndata.q_no );
*/
ndata.datasize = skb->len;
cmdsetup.u64 = 0;
cmdsetup.s.ifidx = lio->linfo.ifidx;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (is_ipv4(skb) && !is_ip_fragmented(skb) && is_tcpudp(skb)) {
tag = get_ipv4_5tuple_tag(skb);
cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1;
if (ip_hdr(skb)->ihl > 5)
cmdsetup.s.ipv4opts_ipv6exthdr =
OCT_PKT_PARAM_IPV4OPTS;
} else if (is_ipv6(skb)) {
tag = get_ipv6_5tuple_tag(skb);
cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1;
if (is_with_extn_hdr(skb))
cmdsetup.s.ipv4opts_ipv6exthdr =
OCT_PKT_PARAM_IPV6EXTHDR;
} else if (is_vlan(skb)) {
if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto
== htons(ETH_P_IP) &&
!is_ip_fragmented(skb) && is_tcpudp(skb)) {
tag = get_ipv4_5tuple_tag(skb);
cmdsetup.s.cksum_offset =
sizeof(struct vlan_ethhdr) + 1;
if (ip_hdr(skb)->ihl > 5)
cmdsetup.s.ipv4opts_ipv6exthdr =
OCT_PKT_PARAM_IPV4OPTS;
} else if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto
== htons(ETH_P_IPV6)) {
tag = get_ipv6_5tuple_tag(skb);
cmdsetup.s.cksum_offset =
sizeof(struct vlan_ethhdr) + 1;
if (is_with_extn_hdr(skb))
cmdsetup.s.ipv4opts_ipv6exthdr =
OCT_PKT_PARAM_IPV6EXTHDR;
}
}
}
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
cmdsetup.s.timestamp = 1;
}
if (skb_shinfo(skb)->nr_frags == 0) {
cmdsetup.s.u.datasize = skb->len;
octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag);
/* Offload checksum calculation for TCP/UDP packets */
ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev,
skb->data,
skb->len,
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) {
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 1\n",
__func__);
return NETDEV_TX_BUSY;
}
finfo->dptr = ndata.cmd.dptr;
ndata.reqtype = REQTYPE_NORESP_NET;
} else {
int i, frags;
struct skb_frag_struct *frag;
struct octnic_gather *g;
spin_lock(&lio->lock);
g = (struct octnic_gather *)list_delete_head(&lio->glist);
spin_unlock(&lio->lock);
if (!g) {
netif_info(lio, tx_err, lio->netdev,
"Transmit scatter gather: glist null!\n");
goto lio_xmit_failed;
}
cmdsetup.s.gather = 1;
cmdsetup.s.u.gatherptrs = (skb_shinfo(skb)->nr_frags + 1);
octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag);
memset(g->sg, 0, g->sg_size);
g->sg[0].ptr[0] = dma_map_single(&oct->pci_dev->dev,
skb->data,
(skb->len - skb->data_len),
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev, g->sg[0].ptr[0])) {
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 2\n",
__func__);
return NETDEV_TX_BUSY;
}
add_sg_size(&g->sg[0], (skb->len - skb->data_len), 0);
frags = skb_shinfo(skb)->nr_frags;
i = 1;
while (frags--) {
frag = &skb_shinfo(skb)->frags[i - 1];
g->sg[(i >> 2)].ptr[(i & 3)] =
dma_map_page(&oct->pci_dev->dev,
frag->page.p,
frag->page_offset,
frag->size,
DMA_TO_DEVICE);
add_sg_size(&g->sg[(i >> 2)], frag->size, (i & 3));
i++;
}
ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev,
g->sg, g->sg_size,
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) {
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 3\n",
__func__);
dma_unmap_single(&oct->pci_dev->dev, g->sg[0].ptr[0],
skb->len - skb->data_len,
DMA_TO_DEVICE);
return NETDEV_TX_BUSY;
}
finfo->dptr = ndata.cmd.dptr;
finfo->g = g;
ndata.reqtype = REQTYPE_NORESP_NET_SG;
}
if (skb_shinfo(skb)->gso_size) {
struct octeon_instr_irh *irh =
(struct octeon_instr_irh *)&ndata.cmd.irh;
union tx_info *tx_info = (union tx_info *)&ndata.cmd.ossp[0];
irh->len = 1; /* to indicate that ossp[0] contains tx_info */
tx_info->s.gso_size = skb_shinfo(skb)->gso_size;
tx_info->s.gso_segs = skb_shinfo(skb)->gso_segs;
}
xmit_more = skb->xmit_more;
if (unlikely(cmdsetup.s.timestamp))
status = send_nic_timestamp_pkt(oct, &ndata, finfo, xmit_more);
else
status = octnet_send_nic_data_pkt(oct, &ndata, xmit_more);
if (status == IQ_SEND_FAILED)
goto lio_xmit_failed;
netif_info(lio, tx_queued, lio->netdev, "Transmit queued successfully\n");
if (status == IQ_SEND_STOP)
stop_q(lio->netdev, q_idx);
netdev->trans_start = jiffies;
stats->tx_done++;
stats->tx_tot_bytes += skb->len;
return NETDEV_TX_OK;
lio_xmit_failed:
stats->tx_dropped++;
netif_info(lio, tx_err, lio->netdev, "IQ%d Transmit dropped:%llu\n",
iq_no, stats->tx_dropped);
dma_unmap_single(&oct->pci_dev->dev, ndata.cmd.dptr,
ndata.datasize, DMA_TO_DEVICE);
recv_buffer_free(skb);
return NETDEV_TX_OK;
}
/** \brief Network device Tx timeout
* @param netdev pointer to network device
*/
static void liquidio_tx_timeout(struct net_device *netdev)
{
struct lio *lio;
lio = GET_LIO(netdev);
netif_info(lio, tx_err, lio->netdev,
"Transmit timeout tx_dropped:%ld, waking up queues now!!\n",
netdev->stats.tx_dropped);
netdev->trans_start = jiffies;
txqs_wake(netdev);
}
int liquidio_set_feature(struct net_device *netdev, int cmd)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
struct octnic_ctrl_params nparams;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = cmd;
nctrl.ncmd.s.param1 = lio->linfo.ifidx;
nctrl.ncmd.s.param2 = OCTNIC_LROIPV4 | OCTNIC_LROIPV6;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
nparams.resp_order = OCTEON_RESP_NORESPONSE;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n",
ret);
}
return ret;
}
/** \brief Net device fix features
* @param netdev pointer to network device
* @param request features requested
* @returns updated features list
*/
static netdev_features_t liquidio_fix_features(struct net_device *netdev,
netdev_features_t request)
{
struct lio *lio = netdev_priv(netdev);
if ((request & NETIF_F_RXCSUM) &&
!(lio->dev_capability & NETIF_F_RXCSUM))
request &= ~NETIF_F_RXCSUM;
if ((request & NETIF_F_HW_CSUM) &&
!(lio->dev_capability & NETIF_F_HW_CSUM))
request &= ~NETIF_F_HW_CSUM;
if ((request & NETIF_F_TSO) && !(lio->dev_capability & NETIF_F_TSO))
request &= ~NETIF_F_TSO;
if ((request & NETIF_F_TSO6) && !(lio->dev_capability & NETIF_F_TSO6))
request &= ~NETIF_F_TSO6;
if ((request & NETIF_F_LRO) && !(lio->dev_capability & NETIF_F_LRO))
request &= ~NETIF_F_LRO;
/*Disable LRO if RXCSUM is off */
if (!(request & NETIF_F_RXCSUM) && (netdev->features & NETIF_F_LRO) &&
(lio->dev_capability & NETIF_F_LRO))
request &= ~NETIF_F_LRO;
return request;
}
/** \brief Net device set features
* @param netdev pointer to network device
* @param features features to enable/disable
*/
static int liquidio_set_features(struct net_device *netdev,
netdev_features_t features)
{
struct lio *lio = netdev_priv(netdev);
if (!((netdev->features ^ features) & NETIF_F_LRO))
return 0;
if ((features & NETIF_F_LRO) && (lio->dev_capability & NETIF_F_LRO))
liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE);
else if (!(features & NETIF_F_LRO) &&
(lio->dev_capability & NETIF_F_LRO))
liquidio_set_feature(netdev, OCTNET_CMD_LRO_DISABLE);
return 0;
}
static struct net_device_ops lionetdevops = {
.ndo_open = liquidio_open,
.ndo_stop = liquidio_stop,
.ndo_start_xmit = liquidio_xmit,
.ndo_get_stats = liquidio_get_stats,
.ndo_set_mac_address = liquidio_set_mac,
.ndo_set_rx_mode = liquidio_set_mcast_list,
.ndo_tx_timeout = liquidio_tx_timeout,
.ndo_change_mtu = liquidio_change_mtu,
.ndo_do_ioctl = liquidio_ioctl,
.ndo_fix_features = liquidio_fix_features,
.ndo_set_features = liquidio_set_features,
};
/** \brief Entry point for the liquidio module
*/
static int __init liquidio_init(void)
{
int i;
struct handshake *hs;
init_completion(&first_stage);
octeon_init_device_list(conf_type);
if (liquidio_init_pci())
return -EINVAL;
wait_for_completion_timeout(&first_stage, msecs_to_jiffies(1000));
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
wait_for_completion(&hs->init);
if (!hs->init_ok) {
/* init handshake failed */
dev_err(&hs->pci_dev->dev,
"Failed to init device\n");
liquidio_deinit_pci();
return -EIO;
}
}
}
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
wait_for_completion_timeout(&hs->started,
msecs_to_jiffies(30000));
if (!hs->started_ok) {
/* starter handshake failed */
dev_err(&hs->pci_dev->dev,
"Firmware failed to start\n");
liquidio_deinit_pci();
return -EIO;
}
}
}
return 0;
}
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13 09:11:50 +08:00
static int lio_nic_info(struct octeon_recv_info *recv_info, void *buf)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 09:15:23 +08:00
{
struct octeon_device *oct = (struct octeon_device *)buf;
struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt;
int ifidx = 0;
union oct_link_status *ls;
int i;
if ((recv_pkt->buffer_size[0] != sizeof(*ls)) ||
(recv_pkt->rh.r_nic_info.ifidx > oct->ifcount)) {
dev_err(&oct->pci_dev->dev, "Malformed NIC_INFO, len=%d, ifidx=%d\n",
recv_pkt->buffer_size[0],
recv_pkt->rh.r_nic_info.ifidx);
goto nic_info_err;
}
ifidx = recv_pkt->rh.r_nic_info.ifidx;
ls = (union oct_link_status *)get_rbd(recv_pkt->buffer_ptr[0]);
octeon_swap_8B_data((u64 *)ls, (sizeof(union oct_link_status)) >> 3);
update_link_status(oct->props[ifidx].netdev, ls);
nic_info_err:
for (i = 0; i < recv_pkt->buffer_count; i++)
recv_buffer_free(recv_pkt->buffer_ptr[i]);
octeon_free_recv_info(recv_info);
return 0;
}
/**
* \brief Setup network interfaces
* @param octeon_dev octeon device
*
* Called during init time for each device. It assumes the NIC
* is already up and running. The link information for each
* interface is passed in link_info.
*/
static int setup_nic_devices(struct octeon_device *octeon_dev)
{
struct lio *lio = NULL;
struct net_device *netdev;
u8 mac[6], i, j;
struct octeon_soft_command *sc;
struct liquidio_if_cfg_context *ctx;
struct liquidio_if_cfg_resp *resp;
struct octdev_props *props;
int retval, num_iqueues, num_oqueues, q_no;
u64 q_mask;
int num_cpus = num_online_cpus();
union oct_nic_if_cfg if_cfg;
unsigned int base_queue;
unsigned int gmx_port_id;
u32 resp_size, ctx_size;
/* This is to handle link status changes */
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
OPCODE_NIC_INFO,
lio_nic_info, octeon_dev);
/* REQTYPE_RESP_NET and REQTYPE_SOFT_COMMAND do not have free functions.
* They are handled directly.
*/
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET,
free_netbuf);
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET_SG,
free_netsgbuf);
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_RESP_NET_SG,
free_netsgbuf_with_resp);
for (i = 0; i < octeon_dev->ifcount; i++) {
resp_size = sizeof(struct liquidio_if_cfg_resp);
ctx_size = sizeof(struct liquidio_if_cfg_context);
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(octeon_dev, 0,
resp_size, ctx_size);
resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
num_iqueues =
CFG_GET_NUM_TXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
num_oqueues =
CFG_GET_NUM_RXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
base_queue =
CFG_GET_BASE_QUE_NIC_IF(octeon_get_conf(octeon_dev), i);
gmx_port_id =
CFG_GET_GMXID_NIC_IF(octeon_get_conf(octeon_dev), i);
if (num_iqueues > num_cpus)
num_iqueues = num_cpus;
if (num_oqueues > num_cpus)
num_oqueues = num_cpus;
dev_dbg(&octeon_dev->pci_dev->dev,
"requesting config for interface %d, iqs %d, oqs %d\n",
i, num_iqueues, num_oqueues);
ACCESS_ONCE(ctx->cond) = 0;
ctx->octeon_id = lio_get_device_id(octeon_dev);
init_waitqueue_head(&ctx->wc);
if_cfg.u64 = 0;
if_cfg.s.num_iqueues = num_iqueues;
if_cfg.s.num_oqueues = num_oqueues;
if_cfg.s.base_queue = base_queue;
if_cfg.s.gmx_port_id = gmx_port_id;
octeon_prepare_soft_command(octeon_dev, sc, OPCODE_NIC,
OPCODE_NIC_IF_CFG, i,
if_cfg.u64, 0);
sc->callback = if_cfg_callback;
sc->callback_arg = sc;
sc->wait_time = 1000;
retval = octeon_send_soft_command(octeon_dev, sc);
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
"iq/oq config failed status: %x\n",
retval);
/* Soft instr is freed by driver in case of failure. */
goto setup_nic_dev_fail;
}
/* Sleep on a wait queue till the cond flag indicates that the
* response arrived or timed-out.
*/
sleep_cond(&ctx->wc, &ctx->cond);
retval = resp->status;
if (retval) {
dev_err(&octeon_dev->pci_dev->dev, "iq/oq config failed\n");
goto setup_nic_dev_fail;
}
octeon_swap_8B_data((u64 *)(&resp->cfg_info),
(sizeof(struct liquidio_if_cfg_info)) >> 3);
num_iqueues = hweight64(resp->cfg_info.iqmask);
num_oqueues = hweight64(resp->cfg_info.oqmask);
if (!(num_iqueues) || !(num_oqueues)) {
dev_err(&octeon_dev->pci_dev->dev,
"Got bad iqueues (%016llx) or oqueues (%016llx) from firmware.\n",
resp->cfg_info.iqmask,
resp->cfg_info.oqmask);
goto setup_nic_dev_fail;
}
dev_dbg(&octeon_dev->pci_dev->dev,
"interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d\n",
i, resp->cfg_info.iqmask, resp->cfg_info.oqmask,
num_iqueues, num_oqueues);
netdev = alloc_etherdev_mq(LIO_SIZE, num_iqueues);
if (!netdev) {
dev_err(&octeon_dev->pci_dev->dev, "Device allocation failed\n");
goto setup_nic_dev_fail;
}
props = &octeon_dev->props[i];
props->netdev = netdev;
if (num_iqueues > 1)
lionetdevops.ndo_select_queue = select_q;
/* Associate the routines that will handle different
* netdev tasks.
*/
netdev->netdev_ops = &lionetdevops;
lio = GET_LIO(netdev);
memset(lio, 0, sizeof(struct lio));
lio->linfo.ifidx = resp->cfg_info.ifidx;
lio->ifidx = resp->cfg_info.ifidx;
lio->linfo.num_rxpciq = num_oqueues;
lio->linfo.num_txpciq = num_iqueues;
q_mask = resp->cfg_info.oqmask;
/* q_mask is 0-based and already verified mask is nonzero */
for (j = 0; j < num_oqueues; j++) {
q_no = __ffs64(q_mask);
q_mask &= (~(1UL << q_no));
lio->linfo.rxpciq[j] = q_no;
}
q_mask = resp->cfg_info.iqmask;
for (j = 0; j < num_iqueues; j++) {
q_no = __ffs64(q_mask);
q_mask &= (~(1UL << q_no));
lio->linfo.txpciq[j] = q_no;
}
lio->linfo.hw_addr = resp->cfg_info.linfo.hw_addr;
lio->linfo.gmxport = resp->cfg_info.linfo.gmxport;
lio->linfo.link.u64 = resp->cfg_info.linfo.link.u64;
lio->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
lio->dev_capability = NETIF_F_HIGHDMA
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
| NETIF_F_SG | NETIF_F_RXCSUM
| NETIF_F_TSO | NETIF_F_TSO6
| NETIF_F_LRO;
netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE);
netdev->features = lio->dev_capability;
netdev->vlan_features = lio->dev_capability;
netdev->hw_features = lio->dev_capability;
/* Point to the properties for octeon device to which this
* interface belongs.
*/
lio->oct_dev = octeon_dev;
lio->octprops = props;
lio->netdev = netdev;
spin_lock_init(&lio->lock);
dev_dbg(&octeon_dev->pci_dev->dev,
"if%d gmx: %d hw_addr: 0x%llx\n", i,
lio->linfo.gmxport, CVM_CAST64(lio->linfo.hw_addr));
/* 64-bit swap required on LE machines */
octeon_swap_8B_data(&lio->linfo.hw_addr, 1);
for (j = 0; j < 6; j++)
mac[j] = *((u8 *)(((u8 *)&lio->linfo.hw_addr) + 2 + j));
/* Copy MAC Address to OS network device structure */
ether_addr_copy(netdev->dev_addr, mac);
if (setup_io_queues(octeon_dev, netdev)) {
dev_err(&octeon_dev->pci_dev->dev, "I/O queues creation failed\n");
goto setup_nic_dev_fail;
}
ifstate_set(lio, LIO_IFSTATE_DROQ_OPS);
/* By default all interfaces on a single Octeon uses the same
* tx and rx queues
*/
lio->txq = lio->linfo.txpciq[0];
lio->rxq = lio->linfo.rxpciq[0];
lio->tx_qsize = octeon_get_tx_qsize(octeon_dev, lio->txq);
lio->rx_qsize = octeon_get_rx_qsize(octeon_dev, lio->rxq);
if (setup_glist(lio)) {
dev_err(&octeon_dev->pci_dev->dev,
"Gather list allocation failed\n");
goto setup_nic_dev_fail;
}
/* Register ethtool support */
liquidio_set_ethtool_ops(netdev);
liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE);
if ((debug != -1) && (debug & NETIF_MSG_HW))
liquidio_set_feature(netdev, OCTNET_CMD_VERBOSE_ENABLE);
/* Register the network device with the OS */
if (register_netdev(netdev)) {
dev_err(&octeon_dev->pci_dev->dev, "Device registration failed\n");
goto setup_nic_dev_fail;
}
dev_dbg(&octeon_dev->pci_dev->dev,
"Setup NIC ifidx:%d mac:%02x%02x%02x%02x%02x%02x\n",
i, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
netif_carrier_off(netdev);
if (lio->linfo.link.s.status) {
netif_carrier_on(netdev);
start_txq(netdev);
} else {
netif_carrier_off(netdev);
}
ifstate_set(lio, LIO_IFSTATE_REGISTERED);
dev_dbg(&octeon_dev->pci_dev->dev,
"NIC ifidx:%d Setup successful\n", i);
octeon_free_soft_command(octeon_dev, sc);
}
return 0;
setup_nic_dev_fail:
octeon_free_soft_command(octeon_dev, sc);
while (i--) {
dev_err(&octeon_dev->pci_dev->dev,
"NIC ifidx:%d Setup failed\n", i);
liquidio_destroy_nic_device(octeon_dev, i);
}
return -ENODEV;
}
/**
* \brief initialize the NIC
* @param oct octeon device
*
* This initialization routine is called once the Octeon device application is
* up and running
*/
static int liquidio_init_nic_module(struct octeon_device *oct)
{
struct oct_intrmod_cfg *intrmod_cfg;
int retval = 0;
int num_nic_ports = CFG_GET_NUM_NIC_PORTS(octeon_get_conf(oct));
dev_dbg(&oct->pci_dev->dev, "Initializing network interfaces\n");
/* only default iq and oq were initialized
* initialize the rest as well
*/
/* run port_config command for each port */
oct->ifcount = num_nic_ports;
memset(oct->props, 0,
sizeof(struct octdev_props) * num_nic_ports);
retval = setup_nic_devices(oct);
if (retval) {
dev_err(&oct->pci_dev->dev, "Setup NIC devices failed\n");
goto octnet_init_failure;
}
liquidio_ptp_init(oct);
/* Initialize interrupt moderation params */
intrmod_cfg = &((struct octeon_device *)oct)->intrmod;
intrmod_cfg->intrmod_enable = 1;
intrmod_cfg->intrmod_check_intrvl = LIO_INTRMOD_CHECK_INTERVAL;
intrmod_cfg->intrmod_maxpkt_ratethr = LIO_INTRMOD_MAXPKT_RATETHR;
intrmod_cfg->intrmod_minpkt_ratethr = LIO_INTRMOD_MINPKT_RATETHR;
intrmod_cfg->intrmod_maxcnt_trigger = LIO_INTRMOD_MAXCNT_TRIGGER;
intrmod_cfg->intrmod_maxtmr_trigger = LIO_INTRMOD_MAXTMR_TRIGGER;
intrmod_cfg->intrmod_mintmr_trigger = LIO_INTRMOD_MINTMR_TRIGGER;
intrmod_cfg->intrmod_mincnt_trigger = LIO_INTRMOD_MINCNT_TRIGGER;
dev_dbg(&oct->pci_dev->dev, "Network interfaces ready\n");
return retval;
octnet_init_failure:
oct->ifcount = 0;
return retval;
}
/**
* \brief starter callback that invokes the remaining initialization work after
* the NIC is up and running.
* @param octptr work struct work_struct
*/
static void nic_starter(struct work_struct *work)
{
struct octeon_device *oct;
struct cavium_wk *wk = (struct cavium_wk *)work;
oct = (struct octeon_device *)wk->ctxptr;
if (atomic_read(&oct->status) == OCT_DEV_RUNNING)
return;
/* If the status of the device is CORE_OK, the core
* application has reported its application type. Call
* any registered handlers now and move to the RUNNING
* state.
*/
if (atomic_read(&oct->status) != OCT_DEV_CORE_OK) {
schedule_delayed_work(&oct->nic_poll_work.work,
LIQUIDIO_STARTER_POLL_INTERVAL_MS);
return;
}
atomic_set(&oct->status, OCT_DEV_RUNNING);
if (oct->app_mode && oct->app_mode == CVM_DRV_NIC_APP) {
dev_dbg(&oct->pci_dev->dev, "Starting NIC module\n");
if (liquidio_init_nic_module(oct))
dev_err(&oct->pci_dev->dev, "NIC initialization failed\n");
else
handshake[oct->octeon_id].started_ok = 1;
} else {
dev_err(&oct->pci_dev->dev,
"Unexpected application running on NIC (%d). Check firmware.\n",
oct->app_mode);
}
complete(&handshake[oct->octeon_id].started);
}
/**
* \brief Device initialization for each Octeon device that is probed
* @param octeon_dev octeon device
*/
static int octeon_device_init(struct octeon_device *octeon_dev)
{
int j, ret;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)octeon_dev->priv;
atomic_set(&octeon_dev->status, OCT_DEV_BEGIN_STATE);
/* Enable access to the octeon device and make its DMA capability
* known to the OS.
*/
if (octeon_pci_os_setup(octeon_dev))
return 1;
/* Identify the Octeon type and map the BAR address space. */
if (octeon_chip_specific_setup(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Chip specific setup failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_PCI_MAP_DONE);
octeon_dev->app_mode = CVM_DRV_INVALID_APP;
/* Do a soft reset of the Octeon device. */
if (octeon_dev->fn_list.soft_reset(octeon_dev))
return 1;
/* Initialize the dispatch mechanism used to push packets arriving on
* Octeon Output queues.
*/
if (octeon_init_dispatch_list(octeon_dev))
return 1;
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
OPCODE_NIC_CORE_DRV_ACTIVE,
octeon_core_drv_init,
octeon_dev);
INIT_DELAYED_WORK(&octeon_dev->nic_poll_work.work, nic_starter);
octeon_dev->nic_poll_work.ctxptr = (void *)octeon_dev;
schedule_delayed_work(&octeon_dev->nic_poll_work.work,
LIQUIDIO_STARTER_POLL_INTERVAL_MS);
atomic_set(&octeon_dev->status, OCT_DEV_DISPATCH_INIT_DONE);
octeon_set_io_queues_off(octeon_dev);
/* Setup the data structures that manage this Octeon's Input queues. */
if (octeon_setup_instr_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev,
"instruction queue initialization failed\n");
/* On error, release any previously allocated queues */
for (j = 0; j < octeon_dev->num_iqs; j++)
octeon_delete_instr_queue(octeon_dev, j);
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE);
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
/* Initialize lists to manage the requests of different types that
* arrive from user & kernel applications for this octeon device.
*/
if (octeon_setup_response_list(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Response list allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_RESP_LIST_INIT_DONE);
if (octeon_setup_output_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Output queue initialization failed\n");
/* Release any previously allocated queues */
for (j = 0; j < octeon_dev->num_oqs; j++)
octeon_delete_droq(octeon_dev, j);
}
atomic_set(&octeon_dev->status, OCT_DEV_DROQ_INIT_DONE);
/* The input and output queue registers were setup earlier (the queues
* were not enabled). Any additional registers that need to be
* programmed should be done now.
*/
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev,
"Failed to configure device registers\n");
return ret;
}
/* Initialize the tasklet that handles output queue packet processing.*/
dev_dbg(&octeon_dev->pci_dev->dev, "Initializing droq tasklet\n");
tasklet_init(&oct_priv->droq_tasklet, octeon_droq_bh,
(unsigned long)octeon_dev);
/* Setup the interrupt handler and record the INT SUM register address
*/
octeon_setup_interrupt(octeon_dev);
/* Enable Octeon device interrupts */
octeon_dev->fn_list.enable_interrupt(octeon_dev->chip);
/* Enable the input and output queues for this Octeon device */
octeon_dev->fn_list.enable_io_queues(octeon_dev);
atomic_set(&octeon_dev->status, OCT_DEV_IO_QUEUES_DONE);
dev_dbg(&octeon_dev->pci_dev->dev, "Waiting for DDR initialization...\n");
if (ddr_timeout == 0) {
dev_info(&octeon_dev->pci_dev->dev,
"WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n");
}
schedule_timeout_uninterruptible(HZ * LIO_RESET_SECS);
/* Wait for the octeon to initialize DDR after the soft-reset. */
ret = octeon_wait_for_ddr_init(octeon_dev, &ddr_timeout);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev,
"DDR not initialized. Please confirm that board is configured to boot from Flash, ret: %d\n",
ret);
return 1;
}
if (octeon_wait_for_bootloader(octeon_dev, 1000) != 0) {
dev_err(&octeon_dev->pci_dev->dev, "Board not responding\n");
return 1;
}
dev_dbg(&octeon_dev->pci_dev->dev, "Initializing consoles\n");
ret = octeon_init_consoles(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not access board consoles\n");
return 1;
}
ret = octeon_add_console(octeon_dev, 0);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not access board console\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_CONSOLE_INIT_DONE);
dev_dbg(&octeon_dev->pci_dev->dev, "Loading firmware\n");
ret = load_firmware(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not load firmware to board\n");
return 1;
}
handshake[octeon_dev->octeon_id].init_ok = 1;
complete(&handshake[octeon_dev->octeon_id].init);
atomic_set(&octeon_dev->status, OCT_DEV_HOST_OK);
/* Send Credit for Octeon Output queues. Credits are always sent after
* the output queue is enabled.
*/
for (j = 0; j < octeon_dev->num_oqs; j++)
writel(octeon_dev->droq[j]->max_count,
octeon_dev->droq[j]->pkts_credit_reg);
/* Packets can start arriving on the output queues from this point. */
return 0;
}
/**
* \brief Exits the module
*/
static void __exit liquidio_exit(void)
{
liquidio_deinit_pci();
pr_info("LiquidIO network module is now unloaded\n");
}
module_init(liquidio_init);
module_exit(liquidio_exit);