UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/soc/samsung/Kconfig

237 lines
6.7 KiB
Plaintext
Raw Normal View History

ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
tristate "ASoC support for Samsung"
ASoC: samsung: add support for exynos7 I2S controller Exynos7 I2S controller has no internal dma, supports more no. of root clock sampling frequencies and has more no.of Rx fifos to support 7.1CH recording in TDM mode. Due to more no. of root clock frequency values some of the bit offsets got shifted up by one. Also I2S1 on previous Samsung platforms uses v3 dai type but on Exynos7 it is upgraded to v5 with slightly modified register offsets for supporting more no.of RFS values. Due to the above changes, the driver has to be modified to handle all versions of I2S controller. For this I introduced a new structure to hold modified bit offsets and masks which is passed as dai data. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07 14:54:40 +08:00
depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
ASoC: samsung: s3c24xx dmaengine follow-up Commit ae602456e83c92 ("ASoC: samsung: drop support for legacy S3C24XX DMA API") removed the old code for the samsung specific DMA interfaces, now that everybody can use dmaengine. This picks up the few remaining pieces left over by that patch: The most important one is the removal of the dma_data->ops->started() calls in ac97. My understanding is that these are only required for drivers that do not support cyclic transfers, which the new dma engine driver now does, so we can simply remove them. This would also fix at least one bug in the ac97 driver on newer machines, which currently gives us a NULL pointer dereference from trying to call dma_data->ops->started(). Further, we must no longer 'select' S3C2410_DMA, which conflicts with the dmaengine driver. The SND_S3C_DMA symbol is now useless, because it is always selected, so we can remove it and build the dmaengine support unconditionally. Finally, we should not 'select' S3C24XX_DMAC or S3C64XX_PL080, which may have additional dependencies. This replaces it with 'depends on', to be more conservative. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-11 21:45:07 +08:00
depends on S3C64XX_PL080 || !ARCH_S3C64XX
depends on S3C24XX_DMAC || !ARCH_S3C24XX
ASoC: samsung: s3c24{xx,12}-i2s: port to use generic dmaengine API Use dmaengine instead of legacy s3c24xx DMA API for s3c24xx and s3c2412 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-24 04:24:04 +08:00
select SND_SOC_GENERIC_DMAENGINE_PCM
[ALSA] ASoC Samsung S3C24xx build This patch builds the Samsung S3C24xx audio DMA and I2S drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-14 20:20:46 +08:00
help
Say Y or M if you want to add support for codecs attached to
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
the Samsung SoCs' Audio interfaces. You will also need to
ASoC: Disable S3C64xx support in Kconfig Due to the process and communications issues with the 2.6.30 S3C platform merges none of the underlying arch/arm code for S3C64xx audio support made it into mainline, rendering the drivers useless. Disable them in Kconfig to avoid user confusion - users patching in the required support can always reenable this too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-09 23:40:41 +08:00
select the audio interfaces to support below.
[ALSA] ASoC Samsung S3C24xx build This patch builds the Samsung S3C24xx audio DMA and I2S drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-14 20:20:46 +08:00
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
config SND_S3C24XX_I2S
[ALSA] ASoC Samsung S3C24xx build This patch builds the Samsung S3C24xx audio DMA and I2S drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-14 20:20:46 +08:00
tristate
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
ASoC: Split s3c2412-i2s.c into core and SoC specific parts The S3C2412 I2S (IIS) interface is replicated on further Samsung SoC parts in a broadly compatible way, so split the common code out into a core called s3c-i2s-v2.[ch] so that the newer SoCs such as the S3C6410 can make use of it. As such, all the original s3c2412 functions are currently being left with their original names, and will be renamed later in the series. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 08:49:30 +08:00
config SND_S3C_I2SV2_SOC
tristate
[ALSA] ASoC: S3C2412 IIS driver S3C2412 SoC IIS support for ALSA/ASoC Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 21:47:21 +08:00
config SND_S3C2412_SOC_I2S
tristate
ASoC: Split s3c2412-i2s.c into core and SoC specific parts The S3C2412 I2S (IIS) interface is replicated on further Samsung SoC parts in a broadly compatible way, so split the common code out into a core called s3c-i2s-v2.[ch] so that the newer SoCs such as the S3C6410 can make use of it. As such, all the original s3c2412 functions are currently being left with their original names, and will be renamed later in the series. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 08:49:30 +08:00
select SND_S3C_I2SV2_SOC
[ALSA] ASoC: S3C2412 IIS driver S3C2412 SoC IIS support for ALSA/ASoC Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-10 21:47:21 +08:00
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
config SND_SAMSUNG_PCM
ASoC: Added the CPU driver for PCM controllers Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-17 15:54:03 +08:00
tristate
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
config SND_SAMSUNG_AC97
ASoC: AC97: S3C: Add controller driver Add the AC97 controller driver for Samsung SoCs that have one. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 13:59:08 +08:00
tristate
select SND_SOC_AC97_BUS
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
config SND_SAMSUNG_SPDIF
ASoC: SAMSUNG: Add S/PDIF CPU driver This patch adds S/PDIF CPU driver for various Samsung SoCs. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12 19:51:23 +08:00
tristate
select SND_SOC_SPDIF
ASoC: Samsung: Add common I2S driver The I2S controllers since S3C64XX are incremental revisions, with a new feature added to the last one. The programming i/f doesn't conflict between these revisions, so it is possible to have one common driver that could manage various versions of I2S (v3, 4 & 5) Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:36:59 +08:00
config SND_SAMSUNG_I2S
tristate
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_NEO1973_WM8753
ASoC: samsung: remove last traces of neo1973-gta01 The support for the Openmoko Neo1973 GTA01 got removed in commit 1ae5cbc52e7c6619a3f44b87809fd25370df31bb ("ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine"). Remove its last traces in the Kconfig file too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-13 06:09:35 +08:00
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_S3C24XX_I2S
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
select SND_SOC_WM8753
ASoC: samsung: Fix a typo of CONFIG_SND_SOC_BT_SCO ... instead of CONFIG_SND_SOC_SCO. Introduced in the commit 200ceb96. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-22 00:09:49 +08:00
select SND_SOC_BT_SCO
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
help
ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driver The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware setup. They both use the same codec with the same routing to the gsm modem and bluetooth chip. But they do use different AMPs though and there are some minor differences in the speaker setup. As a result most of the code of those two drivers is identical. So from a maintenance point of view it makes sense to merge them into a single driver. It also reduces the size of kernel images supporting both the GTA01 and GTA02. As a side-effect of this merge the GTA01 for example gains support for routing audio to and from the bluetooth DAI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07 15:04:58 +08:00
Say Y here to enable audio support for the Openmoko Neo1973
Smartphones.
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_JIVE_WM8750
ASoC: Add JIVE audio support Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 08:49:27 +08:00
tristate "SoC I2S Audio support for Jive"
ASoC: samsung: add explicit i2c/spi dependencies I got another build error from SND_SOC_SMARTQ selecting SND_SOC_WM8750 without ensuring that I2C is enabled, in this example, i2c is a loadable module: sound/built-in.o: In function `wm8750_i2c_probe': :(.text+0x3e6c0): undefined reference to `devm_regmap_init_i2c' sound/built-in.o: In function `wm8750_exit': :(.exit.text+0x3f4): undefined reference to `i2c_del_driver' sound/built-in.o: In function `wm8750_modinit': :(.init.text+0x13d0): undefined reference to `i2c_register_driver' This changes the samsund ASoC Kconfig to have explicit I2C dependencies for each driver that uses an i2c bus and SPI dependencies for the ones using those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-11 21:45:04 +08:00
depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C
ASoC: Add JIVE audio support Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 08:49:27 +08:00
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
ASoC: samsung: Fix trivial typo Changed Sat -> Say. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30 14:28:28 +08:00
Say Y if you want to add support for SoC audio on the Jive.
ASoC: Add JIVE audio support Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04 08:49:27 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SMDK_WM8580
ASoC: SMDK64XX: Rename for other platforms We plan to use the same ASoC Machine driver for most of latest SMDK platforms. So rename the 64XX specific driver to generic named. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:16 +08:00
tristate "SoC I2S Audio support for WM8580 on SMDK"
ASoC: samsung: no more support for S5P6440 and S5P6450 SoCs This patch removes s5p64x0 related WM8580 because of removing support for s5p64x0 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [pebolle@tiscali.nl: reported missing dependency for smdk6450] Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03 06:40:17 +08:00
depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
ASoC: samsung: Replace depends on REGMAP_I2C with depends on I2C regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it, since this can create dependency loops. E.g. if machine driver depends on REGMAP_I2C and selects the CODEC driver and the CODEC driver selects REGMAP_I2C, then the machine driver selects by extension one of its dependencies. The proper way to handle this is for machine drivers to depend on the same dependencies as the CODEC driver they select. In this case it is I2C. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-17 03:04:16 +08:00
depends on I2C
ASoC: Support WM8580 based audio subsystem on SMDK64xx machines New machine driver for WM8580 I2S i/f on SMDK64XX. By default SoC-Slave is set and WM8580 is configured to use it's PLLA to generate clocks from a 12MHz crystal attached to WM8580. [Added dependency on BROKEN since the IISv4 interface hasn't been merged yet, fixed the PLL API usage and removed the disabling of the PLL in the hw_free function since that'll break simultaneous playback and record -- broonie.] Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-19 08:46:06 +08:00
select SND_SOC_WM8580
ASoC: SMDK64XX: Move to use new I2S driver Modify the smdk64xx_wm8580.c to use new i2s controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:07 +08:00
select SND_SAMSUNG_I2S
ASoC: Support WM8580 based audio subsystem on SMDK64xx machines New machine driver for WM8580 I2S i/f on SMDK64XX. By default SoC-Slave is set and WM8580 is configured to use it's PLLA to generate clocks from a 12MHz crystal attached to WM8580. [Added dependency on BROKEN since the IISv4 interface hasn't been merged yet, fixed the PLL API usage and removed the disabling of the PLL in the hw_free function since that'll break simultaneous playback and record -- broonie.] Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-19 08:46:06 +08:00
help
ASoC: SMDK64XX: Rename for other platforms We plan to use the same ASoC Machine driver for most of latest SMDK platforms. So rename the 64XX specific driver to generic named. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:16 +08:00
Say Y if you want to add support for SoC audio on the SMDKs.
ASoC: Support WM8580 based audio subsystem on SMDK64xx machines New machine driver for WM8580 I2S i/f on SMDK64XX. By default SoC-Slave is set and WM8580 is configured to use it's PLLA to generate clocks from a 12MHz crystal attached to WM8580. [Added dependency on BROKEN since the IISv4 interface hasn't been merged yet, fixed the PLL API usage and removed the disabling of the PLL in the hw_free function since that'll break simultaneous playback and record -- broonie.] Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-19 08:46:06 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SMDK_WM8994
ASoC: SMDKV310: Add I2S support Add ASoC machine driver for SMDKV310/C210 boards that have a WM8994 attached to I2S-0. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20 10:05:57 +08:00
tristate "SoC I2S Audio support for WM8994 on SMDK"
ASoC: Samsung: Update Kconfig for I2S,SPDIF and PCM audio Update Kconfig file to enable I2S,PCM audio for wm8994 and spdif on all samsung platforms. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-18 19:47:08 +08:00
depends on SND_SOC_SAMSUNG
Remove GENERIC_HARDIRQ config option After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30 15:39:53 +08:00
depends on I2C=y
ASoC: samsung: WM8994 depends on MFD_WM8994 Any driver that selects SND_SOC_WM8994 should also make sure that MFD_WM8994 is set, since the codec relies on the mfd code: sound/built-in.o: In function `wm8994_read': last.c:(.text+0x20160): undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_write': last.c:(.text+0x20e68): undefined reference to `wm8994_reg_write' This solves the problem by selecting the MFD driver directly and adding extra 'depends on' statements to make sure that we respect the dependencies of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03 22:35:46 +08:00
select MFD_WM8994
ASoC: SMDKV310: Add I2S support Add ASoC machine driver for SMDKV310/C210 boards that have a WM8994 attached to I2S-0. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-20 10:05:57 +08:00
select SND_SOC_WM8994
select SND_SAMSUNG_I2S
help
Say Y if you want to add support for SoC audio on the SMDKs.
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SMDK2443_WM9710
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
depends on SND_SOC_SAMSUNG && MACH_SMDK2443
ASoC: AC97: SMDK2443: Switch to s3c-ac97.c Switch to use s3c-ac97.c AC97 controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 14:01:03 +08:00
select AC97_BUS
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
select SND_SOC_AC97_CODEC
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_SAMSUNG_AC97
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
help
Say Y if you want to add support for SoC audio on smdk2443
with the WM9710.
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
[ALSA] soc - ln2440sbc ac97 support This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-26 20:53:47 +08:00
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-03 13:29:23 +08:00
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
ASoC: AC97: LN2440SBC: Switch to s3c-ac97.c Switch to use s3c-ac97.c AC97 controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 14:02:04 +08:00
select AC97_BUS
[ALSA] soc - ln2440sbc ac97 support This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-26 20:53:47 +08:00
select SND_SOC_AC97_CODEC
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_SAMSUNG_AC97
[ALSA] soc - ln2440sbc ac97 support This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-26 20:53:47 +08:00
help
Say Y if you want to add support for SoC audio on ln2440sbc
with the ALC650.
[ALSA] ASoC S3C24xx machine drivers - Kconfig This patch adds Kconfig and build support for the Neo1973, SMDK2443 and S3C2443 AC97 ALSA audio drivers. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-14 17:06:11 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_S3C24XX_UDA134X
ASoC: Machine driver for for s3c24xx with uda134x Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-15 15:58:32 +08:00
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-03 13:29:23 +08:00
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_S3C24XX_I2S
ASoC: Fix L3 bus handling in Kconfig It has no external dependencies but needs to be selected for L3 based codecs to work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-23 23:34:54 +08:00
select SND_SOC_L3
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_SOC_UDA134X
ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:40 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SIMTEC
ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:40 +08:00
tristate
help
Internal node for common S3C24XX/Simtec suppor
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:40 +08:00
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
ASoC: samsung: TLV320AIC23 and Simtec Hermes audio need I2C This codec requires I2C to be enabled, so any other option that selects it should also depend on I2C. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 19:18:31 +08:00
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_S3C24XX_I2S
ASoC: update Kconfig of AIC23 users to select I2C variant Now that AIC23 supports two control interfaces all existing I2C users should select I2C variant. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 18:04:42 +08:00
select SND_SOC_TLV320AIC23_I2C
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
select SND_SOC_SAMSUNG_SIMTEC
ASoC: S3C24XX: Support for Simtec Hermes boards Add support for the tlv320aic3x CODEC on the Simtec Hermes board. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:43 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SIMTEC_HERMES
ASoC: S3C24XX: Support for Simtec Hermes boards Add support for the tlv320aic3x CODEC on the Simtec Hermes board. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:43 +08:00
tristate "SoC I2S Audio support for Simtec Hermes board"
ASoC: samsung: TLV320AIC23 and Simtec Hermes audio need I2C This codec requires I2C to be enabled, so any other option that selects it should also depend on I2C. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 19:18:31 +08:00
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_S3C24XX_I2S
ASoC: S3C24XX: Support for Simtec Hermes boards Add support for the tlv320aic3x CODEC on the Simtec Hermes board. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 05:50:43 +08:00
select SND_SOC_TLV320AIC3X
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
select SND_SOC_SAMSUNG_SIMTEC
ASoC: AC97: SMDK: Add wm9713 machine driver This patch adds the common machine driver for SMDKs that have a WM9713 codec attched to the AC97 controller. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 13:59:19 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_H1940_UDA1380
ASoC: Add HP iPAQ H1940 support Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on H1940. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-10 03:17:56 +08:00
tristate "Audio support for the HP iPAQ H1940"
ASoC: samsung: UDA1380 needs I2C The UDA1380 driver needs I2C to be enabled, so SND_SOC_SAMSUNG_H1940_UDA1380 and SND_SOC_SAMSUNG_RX1950_UDA1380 also require this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 19:18:28 +08:00
depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C
ASoC: Add HP iPAQ H1940 support Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on H1940. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-10 03:17:56 +08:00
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ h1940 PDA.
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_RX1950_UDA1380
ASoC: Add HP iPAQ RX1950 support Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-30 16:28:08 +08:00
tristate "Audio support for the HP iPAQ RX1950"
ASoC: samsung: UDA1380 needs I2C The UDA1380 driver needs I2C to be enabled, so SND_SOC_SAMSUNG_H1940_UDA1380 and SND_SOC_SAMSUNG_RX1950_UDA1380 also require this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-29 19:18:28 +08:00
depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_S3C24XX_I2S
ASoC: Add HP iPAQ RX1950 support Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-30 16:28:08 +08:00
select SND_SOC_UDA1380
help
This driver provides audio support for HP iPAQ RX1950 PDA.
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SMDK_WM9713
ASoC: AC97: SMDK: Add wm9713 machine driver This patch adds the common machine driver for SMDKs that have a WM9713 codec attched to the AC97 controller. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 13:59:19 +08:00
tristate "SoC AC97 Audio support for SMDK with WM9713"
ASoC: samsung: Remove invalid dependencies These symbols got eliminated when non-DT support for Exynos was removed. Remove them. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30 14:28:27 +08:00
depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
ASoC: AC97: SMDK: Add wm9713 machine driver This patch adds the common machine driver for SMDKs that have a WM9713 codec attched to the AC97 controller. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 13:59:19 +08:00
select SND_SOC_WM9713
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_SAMSUNG_AC97
ASoC: AC97: SMDK: Add wm9713 machine driver This patch adds the common machine driver for SMDKs that have a WM9713 codec attched to the AC97 controller. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-27 13:59:19 +08:00
help
ASoC: samsung: Fix trivial typo Changed Sat -> Say. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-30 14:28:28 +08:00
Say Y if you want to add support for SoC audio on the SMDK.
ASoC: Add SmartQ sound driver This adds sound support for the SmartQ board. The hardware consists of a S3C6410 coupled with a WM8987 over I²S. The WM8750 driver is used for driving the WM8987, as they are register compatible. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-03 08:46:12 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SMARTQ
ASoC: Add SmartQ sound driver This adds sound support for the SmartQ board. The hardware consists of a S3C6410 coupled with a WM8987 over I²S. The WM8750 driver is used for driving the WM8987, as they are register compatible. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-03 08:46:12 +08:00
tristate "SoC I2S Audio support for SmartQ board"
ASoC: samsung: add explicit i2c/spi dependencies I got another build error from SND_SOC_SMARTQ selecting SND_SOC_WM8750 without ensuring that I2C is enabled, in this example, i2c is a loadable module: sound/built-in.o: In function `wm8750_i2c_probe': :(.text+0x3e6c0): undefined reference to `devm_regmap_init_i2c' sound/built-in.o: In function `wm8750_exit': :(.exit.text+0x3f4): undefined reference to `i2c_del_driver' sound/built-in.o: In function `wm8750_modinit': :(.init.text+0x13d0): undefined reference to `i2c_register_driver' This changes the samsund ASoC Kconfig to have explicit I2C dependencies for each driver that uses an i2c bus and SPI dependencies for the ones using those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-11 21:45:04 +08:00
depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C
ASoC: SMARTQ: Move to use new I2S driver Modify the smartq_wm8987.c to use new i2s controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:02 +08:00
select SND_SAMSUNG_I2S
ASoC: Add SmartQ sound driver This adds sound support for the SmartQ board. The hardware consists of a S3C6410 coupled with a WM8987 over I²S. The WM8750 driver is used for driving the WM8987, as they are register compatible. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-03 08:46:12 +08:00
select SND_SOC_WM8750
ASoC: multi-component - Add Aquila sound driver This patch add sound support for the Aquila board based on S5PC110. The Aquila board is based on Samsung SoC(S5PC110) and include WM8994 codec over I2S to support sound. This uses the I2Sv4 driver compatible with I2Sv5 to run sound. The kind of jack is below states : * SND_JACK_HEADPHONE * SND_JACK_HEADSET * SND_JACK_MECHANICAL : When TV-OUT cable is inserted on Aquila board, the TV-OUT cable isn't connected to television. * SND_JACK_AVOUT : When TV-OUT cable is inserted on Aquila board, the TV-OUT cable is connected to television. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> ASoC: multi-component: SAMSUNG: Fix wrong field name on Aquila board This patch modify the wrong field name on Aquila board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-21 07:06:56 +08:00
ASoC: Change Samsung Kconfig from ASOC_ to SND_SOC_ The rest of ASoC is using SND_SOC_ as the prefix for all the Kconfig symbols so do so for the new Samsung drivers too, rather than using ASOC_ as they currently are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-02 22:07:46 +08:00
config SND_SOC_SAMSUNG_SMDK_SPDIF
ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio This patch add S/PDIF machine driver to support S/PDIF PCM audio on SMDKC100, SMDKC110 and SMDKV210 boards. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12 19:58:52 +08:00
tristate "SoC S/PDIF Audio support for SMDK"
ASoC: Samsung: Update Kconfig for I2S,SPDIF and PCM audio Update Kconfig file to enable I2S,PCM audio for wm8994 and spdif on all samsung platforms. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-18 19:47:08 +08:00
depends on SND_SOC_SAMSUNG
ASoC: Samsung: Generalize Kconfig symbols Move prefixes to repesent the nature of Samsung ASoC suitably. SND_S3C24XX_SOC -> ASOC_SAMSUNG SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97 SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580 SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713 SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22 14:37:22 +08:00
select SND_SAMSUNG_SPDIF
ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio This patch add S/PDIF machine driver to support S/PDIF PCM audio on SMDKC100, SMDKC110 and SMDKV210 boards. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12 19:58:52 +08:00
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
ASoC: SAMSUNG: Add WM8580 PCM Machine driver This patch add WM8580 PCM machine driver to support PCM audio on SMDKC110, SMDKV210, SMDK6450, SMDK6440 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKC110, SMDKV210, SMDK6450 Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-09 09:57:59 +08:00
config SND_SOC_SMDK_WM8580_PCM
tristate "SoC PCM Audio support for WM8580 on SMDK"
ASoC: samsung: no more support for S5P6440 and S5P6450 SoCs This patch removes s5p64x0 related WM8580 because of removing support for s5p64x0 SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [pebolle@tiscali.nl: reported missing dependency for smdk6450] Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-03 06:40:17 +08:00
depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110)
ASoC: samsung: Replace depends on REGMAP_I2C with depends on I2C regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it, since this can create dependency loops. E.g. if machine driver depends on REGMAP_I2C and selects the CODEC driver and the CODEC driver selects REGMAP_I2C, then the machine driver selects by extension one of its dependencies. The proper way to handle this is for machine drivers to depend on the same dependencies as the CODEC driver they select. In this case it is I2C. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-17 03:04:16 +08:00
depends on I2C
ASoC: SAMSUNG: Add WM8580 PCM Machine driver This patch add WM8580 PCM machine driver to support PCM audio on SMDKC110, SMDKV210, SMDK6450, SMDK6440 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKC110, SMDKV210, SMDK6450 Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-09 09:57:59 +08:00
select SND_SOC_WM8580
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK.
ASoC: Initial audio support for Speyside on Cragganmore 6410 This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 08:24:39 +08:00
ASoC: SAMSUNG: Add WM8994 PCM Machine driver This patch add WM8994 PCM machine driver to support PCM audio on SMDKV310, SMDKC210 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKV310, SMDKC210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-20 16:29:29 +08:00
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
ASoC: Samsung: Update Kconfig for I2S,SPDIF and PCM audio Update Kconfig file to enable I2S,PCM audio for wm8994 and spdif on all samsung platforms. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-18 19:47:08 +08:00
depends on SND_SOC_SAMSUNG
Remove GENERIC_HARDIRQ config option After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30 15:39:53 +08:00
depends on I2C=y
ASoC: samsung: WM8994 depends on MFD_WM8994 Any driver that selects SND_SOC_WM8994 should also make sure that MFD_WM8994 is set, since the codec relies on the mfd code: sound/built-in.o: In function `wm8994_read': last.c:(.text+0x20160): undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_write': last.c:(.text+0x20e68): undefined reference to `wm8994_reg_write' This solves the problem by selecting the MFD driver directly and adding extra 'depends on' statements to make sure that we respect the dependencies of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03 22:35:46 +08:00
select MFD_WM8994
ASoC: SAMSUNG: Add WM8994 PCM Machine driver This patch add WM8994 PCM machine driver to support PCM audio on SMDKV310, SMDKC210 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKV310, SMDKC210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-20 16:29:29 +08:00
select SND_SOC_WM8994
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK
ASoC: Initial audio support for Speyside on Cragganmore 6410 This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 08:24:39 +08:00
config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
ASoC: Samsung: add missing I2C/SPI dependencies A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19 04:35:08 +08:00
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C && SPI_MASTER
ASoC: Initial audio support for Speyside on Cragganmore 6410 This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13 08:24:39 +08:00
select SND_SAMSUNG_I2S
ASoC: Rename WM8915 to WM8996 For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-24 19:10:44 +08:00
select SND_SOC_WM8996
ASoC: Support the sub speaker driver on Speyside Speyside includes a WM9081 configured as an external speaker driver taking an analogue input from HPOUT2 on the WM8915 on the system. Add support for this to the driver, using a prefix of "Sub" for the WM9081 controls to ensure we avoid collisions with controls on the WM8915. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-12 14:42:25 +08:00
select SND_SOC_WM9081
ASoC: samsung: Add hookup of WM0010 on Speyside The Speyside platform by default has a WM0010 fitted. Now that we have a public driver hook it up in the machine integration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-24 00:05:48 +08:00
select SND_SOC_WM0010
ASoC: Add Springbank I/O card to Speyside Kconfig Signed-off-by: Joseph Pentland <jp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-23 17:41:50 +08:00
select SND_SOC_WM1250_EV1
ASoC: Support Speyside build variants with WM8962 fitted Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26 01:30:45 +08:00
ASoC: Rename Speyside WM8962 to Tobermory All the other machine drivers for non-default configurations are named after the relevant audio module so do so for Tobermory also. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-30 21:30:27 +08:00
config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
ASoC: samsung: add explicit i2c/spi dependencies I got another build error from SND_SOC_SMARTQ selecting SND_SOC_WM8750 without ensuring that I2C is enabled, in this example, i2c is a loadable module: sound/built-in.o: In function `wm8750_i2c_probe': :(.text+0x3e6c0): undefined reference to `devm_regmap_init_i2c' sound/built-in.o: In function `wm8750_exit': :(.exit.text+0x3f4): undefined reference to `i2c_del_driver' sound/built-in.o: In function `wm8750_modinit': :(.init.text+0x13d0): undefined reference to `i2c_register_driver' This changes the samsund ASoC Kconfig to have explicit I2C dependencies for each driver that uses an i2c bus and SPI dependencies for the ones using those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-11 21:45:04 +08:00
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT && I2C
ASoC: Support Speyside build variants with WM8962 fitted Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-26 01:30:45 +08:00
select SND_SAMSUNG_I2S
select SND_SOC_WM8962
ASoC: Add Lowland machine driver The Lowland platform is based on the Cragganmore system like Speyside but uses the WM5100 audio CODEC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24 00:40:01 +08:00
ASoC: bells: Add machine driver for Wolfson Bells boards The Wolfson Bells board takes submodules for various audio functions but since the system integrations are virtually identical for most of them we can support the overwhemling majority from the same machine driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-08 03:03:02 +08:00
config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
ASoC: Samsung: add missing I2C/SPI dependencies A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19 04:35:08 +08:00
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA && I2C && SPI_MASTER
ASoC: bells: Add machine driver for Wolfson Bells boards The Wolfson Bells board takes submodules for various audio functions but since the system integrations are virtually identical for most of them we can support the overwhemling majority from the same machine driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-08 03:03:02 +08:00
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
select SND_SOC_WM5110
select SND_SOC_WM9081
ASoC: bells: Add missing select of WM0010 Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-02 21:02:53 +08:00
select SND_SOC_WM0010
ASoC: bells: Select WM1250-EV1 Springbank audio I/O module Ensure we select the WM1250-EV1 as the current software system configuration demands it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-02 21:02:54 +08:00
select SND_SOC_WM1250_EV1
ASoC: bells: Add machine driver for Wolfson Bells boards The Wolfson Bells board takes submodules for various audio functions but since the system integrations are virtually identical for most of them we can support the overwhemling majority from the same machine driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-08 03:03:02 +08:00
ASoC: Add Lowland machine driver The Lowland platform is based on the Cragganmore system like Speyside but uses the WM5100 audio CODEC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24 00:40:01 +08:00
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
ASoC: samsung: add explicit i2c/spi dependencies I got another build error from SND_SOC_SMARTQ selecting SND_SOC_WM8750 without ensuring that I2C is enabled, in this example, i2c is a loadable module: sound/built-in.o: In function `wm8750_i2c_probe': :(.text+0x3e6c0): undefined reference to `devm_regmap_init_i2c' sound/built-in.o: In function `wm8750_exit': :(.exit.text+0x3f4): undefined reference to `i2c_del_driver' sound/built-in.o: In function `wm8750_modinit': :(.init.text+0x13d0): undefined reference to `i2c_register_driver' This changes the samsund ASoC Kconfig to have explicit I2C dependencies for each driver that uses an i2c bus and SPI dependencies for the ones using those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-11 21:45:04 +08:00
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
ASoC: Add Lowland machine driver The Lowland platform is based on the Cragganmore system like Speyside but uses the WM5100 audio CODEC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24 00:40:01 +08:00
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
select SND_SOC_WM9081
ASoC: Add basic 1277-EV1 Littlemill audio driver The Littlemill audio card supports a number of pluggable miniboards, normally for the WM8994 family of devices. As all these devices look mostly the same from an external configuration point of view and are runtime enumerable we can write a standard machine driver which will work out of the box with any of them. Start doing that with the bare bones of a driver, only supporting AIF1. Future patches will flesh this out to be more fully featured. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 06:05:41 +08:00
config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
ASoC: Samsung: add missing I2C/SPI dependencies A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19 04:35:08 +08:00
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C
ASoC: Add basic 1277-EV1 Littlemill audio driver The Littlemill audio card supports a number of pluggable miniboards, normally for the WM8994 family of devices. As all these devices look mostly the same from an external configuration point of view and are runtime enumerable we can write a standard machine driver which will work out of the box with any of them. Start doing that with the bare bones of a driver, only supporting AIF1. Future patches will flesh this out to be more fully featured. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 06:05:41 +08:00
select SND_SAMSUNG_I2S
ASoC: Make SND_SOC_LITTLEMILL select MFD_WM8994 SND_SOC_LITTLEMILL selects SND_SOC_WM8994, but SND_SOC_WM8994 needs MFD_WM8994. Thus we need to select MFD_WM8994 to fix below build error: LD .tmp_vmlinux1 sound/built-in.o: In function `wm8994_write': sound/soc/codecs/wm8994.c:201: undefined reference to `wm8994_reg_write' sound/built-in.o: In function `wm8994_read': sound/soc/codecs/wm8994.c:222: undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_resume': sound/soc/codecs/wm8994.c:2847: undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_codec_probe': sound/soc/codecs/wm8994.c:3501: undefined reference to `wm8994_reg_read' sound/soc/codecs/wm8994.c:3660: undefined reference to `wm8994_reg_read' sound/soc/codecs/wm8994.c:3672: undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8958_dsp2_fw': sound/soc/codecs/wm8958-dsp2.c:154: undefined reference to `wm8994_bulk_write' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-04 08:15:17 +08:00
select MFD_WM8994
ASoC: Add basic 1277-EV1 Littlemill audio driver The Littlemill audio card supports a number of pluggable miniboards, normally for the WM8994 family of devices. As all these devices look mostly the same from an external configuration point of view and are runtime enumerable we can write a standard machine driver which will work out of the box with any of them. Start doing that with the bare bones of a driver, only supporting AIF1. Future patches will flesh this out to be more fully featured. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 06:05:41 +08:00
select SND_SOC_WM8994
ASoC: samsung: Add sound card driver for Snow board Added machine driver to instantiate I2S based sound card on Snow board. It has MAX98095 audio codec on board. There are some other variants for Snow board which have MAX98090 audio codec. Hence support for MAX98090 is also added to this driver. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 12:44:39 +08:00
config SND_SOC_SNOW
tristate "Audio support for Google Snow boards"
ASoC: samsung: Add I2C dependency for snow Both codecs used by snow, max98090 and max98095 require the use of I2C, so we can only select this driver if I2C is there, otherwise we get a build error like: codecs/max98090.c:2494:1: warning: data definition has no type or storage class [enabled by default] module_i2c_driver(max98090_i2c_driver); ^ codecs/max98095.c:2443:1: warning: data definition has no type or storage class [enabled by default] module_i2c_driver(max98095_i2c_driver); ^ This adds one more I2C dependency to the hundreds we already have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-04 17:40:40 +08:00
depends on SND_SOC_SAMSUNG && I2C
ASoC: samsung: Add sound card driver for Snow board Added machine driver to instantiate I2S based sound card on Snow board. It has MAX98095 audio codec on board. There are some other variants for Snow board which have MAX98090 audio codec. Hence support for MAX98090 is also added to this driver. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 12:44:39 +08:00
select SND_SOC_MAX98090
select SND_SOC_MAX98095
select SND_SAMSUNG_I2S
help
Say Y if you want to add audio support for various Snow
boards based on Exynos5 series of SoCs.
ASoC: samsung: Add machine driver for Odroid X2/U3 This patch adds the sound subsystem driver for Odroid-X2 and Odroid-U3 boards. The codec works in I2S master mode; there are two separate audio routing paths defined, as there are differences in the signal routing between the X2 and U3 boards, i.e. U3 uses single jack for headphones and microphone. Signed-off-by: Chen Zhen <zhen1.chen@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04 21:13:45 +08:00
config SND_SOC_ODROIDX2
tristate "Audio support for Odroid-X2 and Odroid-U3"
ASoC: Samsung: add missing I2C/SPI dependencies A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19 04:35:08 +08:00
depends on SND_SOC_SAMSUNG && I2C
ASoC: samsung: Add machine driver for Odroid X2/U3 This patch adds the sound subsystem driver for Odroid-X2 and Odroid-U3 boards. The codec works in I2S master mode; there are two separate audio routing paths defined, as there are differences in the signal routing between the X2 and U3 boards, i.e. U3 uses single jack for headphones and microphone. Signed-off-by: Chen Zhen <zhen1.chen@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04 21:13:45 +08:00
select SND_SOC_MAX98090
select SND_SAMSUNG_I2S
help
Say Y here to enable audio support for the Odroid-X2/U3.
ASoC: Samsung: Add arndale_rt5631 machine driver and binding Adding machine driver to instantiate I2S based realtek's ALC5631 sound card on Arndale board. There are other variants of Audio Daughter Cards for Arndale Board for which support already exists but there is no support for Realtek's alc5631 codec hence support for ALC5631 based machine driver is being added. This patch also documents the device tree binding for the Arndale board based machine driver. Signed-off-by: Claude Youn <claude.youn@gmail.com> Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26 17:23:04 +08:00
config SND_SOC_ARNDALE_RT5631_ALC5631
tristate "Audio support for RT5631(ALC5631) on Arndale Board"
ASoC: Samsung: add missing I2C/SPI dependencies A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-19 04:35:08 +08:00
depends on SND_SOC_SAMSUNG && I2C
ASoC: Samsung: Add arndale_rt5631 machine driver and binding Adding machine driver to instantiate I2S based realtek's ALC5631 sound card on Arndale board. There are other variants of Audio Daughter Cards for Arndale Board for which support already exists but there is no support for Realtek's alc5631 codec hence support for ALC5631 based machine driver is being added. This patch also documents the device tree binding for the Arndale board based machine driver. Signed-off-by: Claude Youn <claude.youn@gmail.com> Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26 17:23:04 +08:00
select SND_SAMSUNG_I2S
select SND_SOC_RT5631