ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2014 Chen-Yu Tsai
|
|
|
|
*
|
|
|
|
* Chen-Yu Tsai <wens@csie.org>
|
|
|
|
*
|
|
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
|
|
* licensing only applies to this file, and not this project as a
|
|
|
|
* whole.
|
|
|
|
*
|
2014-10-17 17:38:23 +08:00
|
|
|
* a) This file is free software; you can redistribute it and/or
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
|
|
* License, or (at your option) any later version.
|
|
|
|
*
|
2014-10-17 17:38:23 +08:00
|
|
|
* This file is distributed in the hope that it will be useful,
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public
|
2014-10-17 17:38:23 +08:00
|
|
|
* License along with this file; if not, write to the Free
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
|
|
* MA 02110-1301 USA
|
|
|
|
*
|
|
|
|
* Or, alternatively,
|
|
|
|
*
|
|
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
|
|
* obtaining a copy of this software and associated documentation
|
|
|
|
* files (the "Software"), to deal in the Software without
|
|
|
|
* restriction, including without limitation the rights to use,
|
|
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following
|
|
|
|
* conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be
|
|
|
|
* included in all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
2014-12-17 05:59:54 +08:00
|
|
|
#include "sun9i-a80.dtsi"
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Merrii A80 Optimus Board";
|
|
|
|
compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
bootargs = "earlyprintk console=ttyS0,115200";
|
|
|
|
};
|
|
|
|
|
|
|
|
soc {
|
2014-10-31 11:05:48 +08:00
|
|
|
pio: pinctrl@06000800 {
|
|
|
|
i2c3_pins_a: i2c3@0 {
|
|
|
|
/* Enable internal pull-up */
|
|
|
|
allwinner,pull = <1>;
|
|
|
|
};
|
2014-10-31 11:05:49 +08:00
|
|
|
|
|
|
|
led_pins_optimus: led-pins@0 {
|
|
|
|
allwinner,pins = "PH0", "PH1";
|
|
|
|
allwinner,function = "gpio_out";
|
|
|
|
allwinner,drive = <0>;
|
|
|
|
allwinner,pull = <0>;
|
|
|
|
};
|
2014-10-31 11:05:51 +08:00
|
|
|
|
|
|
|
uart4_pins_a: uart4@0 {
|
|
|
|
/* Enable internal pull-up */
|
|
|
|
allwinner,pull = <1>;
|
|
|
|
};
|
2014-10-31 11:05:48 +08:00
|
|
|
};
|
|
|
|
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
uart0: serial@07000000 {
|
2014-10-29 05:41:29 +08:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart0_pins_a>;
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
status = "okay";
|
|
|
|
};
|
2014-10-31 11:05:48 +08:00
|
|
|
|
2014-10-31 11:05:51 +08:00
|
|
|
uart4: serial@07001000 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart4_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-10-31 11:05:48 +08:00
|
|
|
i2c3: i2c@07003400 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c3_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
};
|
2014-10-31 11:05:49 +08:00
|
|
|
|
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&led_pins_optimus>;
|
|
|
|
|
|
|
|
/* The LED names match those found on the board */
|
|
|
|
|
|
|
|
led2 {
|
|
|
|
label = "optimus:led2:usr";
|
|
|
|
gpios = <&pio 7 1 0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* led3 is on PM15, in R_PIO */
|
|
|
|
|
|
|
|
led4 {
|
|
|
|
label = "optimus:led4:usr";
|
|
|
|
gpios = <&pio 7 0 0>;
|
|
|
|
};
|
|
|
|
};
|
ARM: dts: sun9i: Add A80 Optimus Board support
The A80 Optimus Board is was launched with the Allwinner A80 SoC.
It was jointly developed by Allwinner and Merrii.
This board has a UART port, a JTAG connector, USB host ports, a USB
3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
jack, IR receiver, and additional GPIO headers.
This patch adds only basic support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2014-10-08 21:02:54 +08:00
|
|
|
};
|