staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
/*
|
2017-12-06 04:29:31 +08:00
|
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
* Author: Rob Clark <rob@ti.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
|
|
* the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
* more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along with
|
|
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
2018-02-12 17:44:39 +08:00
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/sort.h>
|
2017-05-06 07:57:12 +08:00
|
|
|
#include <linux/sys_soc.h>
|
|
|
|
|
2015-03-06 05:42:39 +08:00
|
|
|
#include <drm/drm_atomic.h>
|
2015-03-06 03:50:00 +08:00
|
|
|
#include <drm/drm_atomic_helper.h>
|
2015-03-06 03:31:37 +08:00
|
|
|
#include <drm/drm_crtc_helper.h>
|
|
|
|
#include <drm/drm_fb_helper.h>
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2012-03-06 00:48:39 +08:00
|
|
|
#include "omap_dmm_tiler.h"
|
2015-03-06 03:31:37 +08:00
|
|
|
#include "omap_drv.h"
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
|
|
|
#define DRIVER_NAME MODULE_NAME
|
|
|
|
#define DRIVER_DESC "OMAP DRM"
|
|
|
|
#define DRIVER_DATE "20110917"
|
|
|
|
#define DRIVER_MAJOR 1
|
|
|
|
#define DRIVER_MINOR 0
|
|
|
|
#define DRIVER_PATCHLEVEL 0
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mode config funcs
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Notes about mapping DSS and DRM entities:
|
|
|
|
* CRTC: overlay
|
|
|
|
* encoder: manager.. with some extension to allow one primary CRTC
|
|
|
|
* and zero or more video CRTC's to be mapped to one encoder?
|
|
|
|
* connector: dssdev.. manager can be attached/detached from different
|
|
|
|
* devices
|
|
|
|
*/
|
|
|
|
|
2015-05-29 21:01:18 +08:00
|
|
|
static void omap_atomic_wait_for_completion(struct drm_device *dev,
|
|
|
|
struct drm_atomic_state *old_state)
|
|
|
|
{
|
2017-07-19 22:39:17 +08:00
|
|
|
struct drm_crtc_state *new_crtc_state;
|
2015-05-29 21:01:18 +08:00
|
|
|
struct drm_crtc *crtc;
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
|
2017-07-19 22:39:17 +08:00
|
|
|
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
|
|
|
|
if (!new_crtc_state->active)
|
2015-05-29 21:01:18 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = omap_crtc_wait_pending(crtc);
|
|
|
|
|
|
|
|
if (!ret)
|
|
|
|
dev_warn(dev->dev,
|
|
|
|
"atomic complete timeout (pipe %u)!\n", i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-05-09 06:27:10 +08:00
|
|
|
static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
|
2015-03-06 05:42:39 +08:00
|
|
|
{
|
2017-05-09 06:27:10 +08:00
|
|
|
struct drm_device *dev = old_state->dev;
|
2015-03-06 05:42:39 +08:00
|
|
|
struct omap_drm_private *priv = dev->dev_private;
|
|
|
|
|
2018-02-13 20:00:42 +08:00
|
|
|
priv->dispc_ops->runtime_get(priv->dispc);
|
2015-05-28 07:09:56 +08:00
|
|
|
|
2017-05-09 06:27:10 +08:00
|
|
|
/* Apply the atomic update. */
|
2015-03-06 05:42:39 +08:00
|
|
|
drm_atomic_helper_commit_modeset_disables(dev, old_state);
|
2017-01-27 18:04:55 +08:00
|
|
|
|
2017-08-23 17:19:02 +08:00
|
|
|
if (priv->omaprev != 0x3430) {
|
|
|
|
/* With the current dss dispc implementation we have to enable
|
|
|
|
* the new modeset before we can commit planes. The dispc ovl
|
|
|
|
* configuration relies on the video mode configuration been
|
|
|
|
* written into the HW when the ovl configuration is
|
|
|
|
* calculated.
|
|
|
|
*
|
|
|
|
* This approach is not ideal because after a mode change the
|
|
|
|
* plane update is executed only after the first vblank
|
|
|
|
* interrupt. The dispc implementation should be fixed so that
|
|
|
|
* it is able use uncommitted drm state information.
|
|
|
|
*/
|
|
|
|
drm_atomic_helper_commit_modeset_enables(dev, old_state);
|
|
|
|
omap_atomic_wait_for_completion(dev, old_state);
|
|
|
|
|
|
|
|
drm_atomic_helper_commit_planes(dev, old_state, 0);
|
|
|
|
|
|
|
|
drm_atomic_helper_commit_hw_done(old_state);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* OMAP3 DSS seems to have issues with the work-around above,
|
|
|
|
* resulting in endless sync losts if a crtc is enabled without
|
|
|
|
* a plane. For now, skip the WA for OMAP3.
|
|
|
|
*/
|
|
|
|
drm_atomic_helper_commit_planes(dev, old_state, 0);
|
|
|
|
|
|
|
|
drm_atomic_helper_commit_modeset_enables(dev, old_state);
|
|
|
|
|
|
|
|
drm_atomic_helper_commit_hw_done(old_state);
|
|
|
|
}
|
2017-05-09 06:27:10 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Wait for completion of the page flips to ensure that old buffers
|
|
|
|
* can't be touched by the hardware anymore before cleaning up planes.
|
|
|
|
*/
|
2015-05-29 21:01:18 +08:00
|
|
|
omap_atomic_wait_for_completion(dev, old_state);
|
2015-03-06 05:42:39 +08:00
|
|
|
|
|
|
|
drm_atomic_helper_cleanup_planes(dev, old_state);
|
|
|
|
|
2018-02-13 20:00:42 +08:00
|
|
|
priv->dispc_ops->runtime_put(priv->dispc);
|
2015-03-06 05:42:39 +08:00
|
|
|
}
|
|
|
|
|
2017-05-09 06:27:10 +08:00
|
|
|
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
|
|
|
|
.atomic_commit_tail = omap_atomic_commit_tail,
|
|
|
|
};
|
2015-03-06 05:42:39 +08:00
|
|
|
|
2012-05-17 19:27:23 +08:00
|
|
|
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
.fb_create = omap_framebuffer_create,
|
2017-12-06 02:25:01 +08:00
|
|
|
.output_poll_changed = drm_fb_helper_output_poll_changed,
|
2015-03-06 03:50:00 +08:00
|
|
|
.atomic_check = drm_atomic_helper_check,
|
2017-05-09 06:27:10 +08:00
|
|
|
.atomic_commit = drm_atomic_helper_commit,
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
};
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
static int get_connector_type(struct omap_dss_device *display)
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
{
|
2018-03-05 21:02:22 +08:00
|
|
|
switch (display->type) {
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
case OMAP_DISPLAY_TYPE_HDMI:
|
|
|
|
return DRM_MODE_CONNECTOR_HDMIA;
|
2013-05-14 19:14:15 +08:00
|
|
|
case OMAP_DISPLAY_TYPE_DVI:
|
|
|
|
return DRM_MODE_CONNECTOR_DVID;
|
2016-03-09 00:39:36 +08:00
|
|
|
case OMAP_DISPLAY_TYPE_DSI:
|
|
|
|
return DRM_MODE_CONNECTOR_DSI;
|
2017-04-27 18:02:28 +08:00
|
|
|
case OMAP_DISPLAY_TYPE_DPI:
|
|
|
|
case OMAP_DISPLAY_TYPE_DBI:
|
|
|
|
return DRM_MODE_CONNECTOR_DPI;
|
|
|
|
case OMAP_DISPLAY_TYPE_VENC:
|
|
|
|
/* TODO: This could also be composite */
|
|
|
|
return DRM_MODE_CONNECTOR_SVIDEO;
|
|
|
|
case OMAP_DISPLAY_TYPE_SDI:
|
|
|
|
return DRM_MODE_CONNECTOR_LVDS;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
default:
|
|
|
|
return DRM_MODE_CONNECTOR_Unknown;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
static void omap_disconnect_pipelines(struct drm_device *ddev)
|
2014-01-02 17:19:52 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
|
|
unsigned int i;
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
2018-03-05 05:42:36 +08:00
|
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
2014-01-02 17:19:52 +08:00
|
|
|
|
2018-03-05 05:42:36 +08:00
|
|
|
omapdss_device_disconnect(NULL, pipe->output);
|
|
|
|
|
|
|
|
omapdss_device_put(pipe->output);
|
|
|
|
omapdss_device_put(pipe->display);
|
|
|
|
pipe->output = NULL;
|
|
|
|
pipe->display = NULL;
|
2018-02-12 17:44:37 +08:00
|
|
|
}
|
|
|
|
|
2018-03-07 06:01:33 +08:00
|
|
|
memset(&priv->channels, 0, sizeof(priv->channels));
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
priv->num_pipes = 0;
|
2014-01-02 17:19:52 +08:00
|
|
|
}
|
drm/omap: Fix and improve crtc and overlay manager correlation
The omapdrm driver currently takes a config/module arg to figure out the number
of crtcs it needs to create. We could create as many crtcs as there are overlay
managers in the DSS hardware, but we don't do that because each crtc eats up
one DSS overlay, and that reduces the number of planes we can attach to a single
crtc.
Since the number of crtcs may be lesser than the number of hardware overlay
managers, we need to figure out which overlay managers to use for our crtcs. The
current approach is to use pipe2chan(), which returns a higher numbered manager
for the crtc.
The problem with this approach is that it assumes that the overlay managers we
choose will connect to the encoders the platform's panels are going to use,
this isn't true, an overlay manager connects only to a few outputs/encoders, and
choosing any overlay manager for our crtc might lead to a situation where the
encoder cannot connect to any of the crtcs we have chosen. For example, an
omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the
current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot
connect to the hdmi encoder at all. The only manager that could have connected
to hdmi was the TV overlay manager.
Therefore, there is a need to choose our overlay managers keeping in mind the
panels we have on that platform. The new approach iterates through all the
available panels, creates encoders and connectors for them, and then tries to
get a suitable overlay manager to create a crtc which can connect to the
encoders.
We use the dispc_channel field in omap_dss_output to retrieve the desired
overlay manager's channel number, we then check whether the manager had already
been assigned to a crtc or not. If it was already assigned to a crtc, we assume
that out of all the encoders which intend use this crtc, only one will run at a
time. If the overlay manager wan't assigned to a crtc till then, we create a
new crtc and link it with the overlay manager.
This approach just looks for the best dispc_channel for each encoder. On DSS HW,
some encoders can connect to multiple overlay managers. Since we don't try
looking for alternate overlay managers, there is a greater possibility that 2
or more encoders end up asking for the same crtc, causing only one encoder to
run at a time.
Also, this approach isn't the most optimal one, it can do either good or bad
depending on the sequence in which the panels/outputs are parsed. The optimal
way would be some sort of back tracking approach, where we improve the set of
managers we use as we iterate through the list of panels/encoders. That's
something left for later.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 21:45:19 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
static int omap_compare_pipes(const void *a, const void *b)
|
2018-02-12 17:44:39 +08:00
|
|
|
{
|
2018-03-05 21:02:22 +08:00
|
|
|
const struct omap_drm_pipeline *pipe1 = a;
|
|
|
|
const struct omap_drm_pipeline *pipe2 = b;
|
2018-02-12 17:44:39 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
if (pipe1->display->alias_id > pipe2->display->alias_id)
|
2018-02-12 17:44:39 +08:00
|
|
|
return 1;
|
2018-03-05 21:02:22 +08:00
|
|
|
else if (pipe1->display->alias_id < pipe2->display->alias_id)
|
2018-02-12 17:44:39 +08:00
|
|
|
return -1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
static int omap_connect_pipelines(struct drm_device *ddev)
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
2018-03-05 05:42:36 +08:00
|
|
|
struct omap_dss_device *output = NULL;
|
2018-03-07 06:01:33 +08:00
|
|
|
unsigned int i;
|
2018-02-12 17:44:37 +08:00
|
|
|
int r;
|
2016-05-04 03:08:01 +08:00
|
|
|
|
|
|
|
if (!omapdss_stack_is_ready())
|
|
|
|
return -EPROBE_DEFER;
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
|
2018-03-05 05:42:36 +08:00
|
|
|
for_each_dss_output(output) {
|
|
|
|
r = omapdss_device_connect(priv->dss, NULL, output);
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
if (r == -EPROBE_DEFER) {
|
2018-03-05 05:42:36 +08:00
|
|
|
omapdss_device_put(output);
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
goto cleanup;
|
|
|
|
} else if (r) {
|
2018-03-05 05:42:36 +08:00
|
|
|
dev_warn(output->dev, "could not connect output %s\n",
|
|
|
|
output->name);
|
2018-02-12 17:44:37 +08:00
|
|
|
} else {
|
2018-03-05 05:42:36 +08:00
|
|
|
struct omap_drm_pipeline *pipe;
|
|
|
|
|
|
|
|
pipe = &priv->pipes[priv->num_pipes++];
|
|
|
|
pipe->output = omapdss_device_get(output);
|
|
|
|
pipe->display = omapdss_display_get(output);
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
|
2018-03-05 05:42:36 +08:00
|
|
|
/* To balance the 'for_each_dss_output' loop */
|
|
|
|
omapdss_device_put(output);
|
2018-02-12 17:44:37 +08:00
|
|
|
break;
|
|
|
|
}
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-02-12 17:44:39 +08:00
|
|
|
/* Sort the list by DT aliases */
|
2018-03-05 21:02:22 +08:00
|
|
|
sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]),
|
|
|
|
omap_compare_pipes, NULL);
|
2018-02-12 17:44:39 +08:00
|
|
|
|
2018-03-07 06:01:33 +08:00
|
|
|
/*
|
|
|
|
* Populate the pipeline lookup table by DISPC channel. Only one display
|
|
|
|
* is allowed per channel.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < priv->num_pipes; ++i) {
|
|
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
|
|
enum omap_channel channel = pipe->output->dispc_channel;
|
|
|
|
|
|
|
|
if (WARN_ON(priv->channels[channel] != NULL)) {
|
|
|
|
r = -EINVAL;
|
|
|
|
goto cleanup;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->channels[channel] = pipe;
|
|
|
|
}
|
|
|
|
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
cleanup:
|
|
|
|
/*
|
|
|
|
* if we are deferring probe, we disconnect the devices we previously
|
|
|
|
* connected
|
|
|
|
*/
|
2018-03-05 21:02:22 +08:00
|
|
|
omap_disconnect_pipelines(ddev);
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
drm/omap: Fix and improve crtc and overlay manager correlation
The omapdrm driver currently takes a config/module arg to figure out the number
of crtcs it needs to create. We could create as many crtcs as there are overlay
managers in the DSS hardware, but we don't do that because each crtc eats up
one DSS overlay, and that reduces the number of planes we can attach to a single
crtc.
Since the number of crtcs may be lesser than the number of hardware overlay
managers, we need to figure out which overlay managers to use for our crtcs. The
current approach is to use pipe2chan(), which returns a higher numbered manager
for the crtc.
The problem with this approach is that it assumes that the overlay managers we
choose will connect to the encoders the platform's panels are going to use,
this isn't true, an overlay manager connects only to a few outputs/encoders, and
choosing any overlay manager for our crtc might lead to a situation where the
encoder cannot connect to any of the crtcs we have chosen. For example, an
omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the
current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot
connect to the hdmi encoder at all. The only manager that could have connected
to hdmi was the TV overlay manager.
Therefore, there is a need to choose our overlay managers keeping in mind the
panels we have on that platform. The new approach iterates through all the
available panels, creates encoders and connectors for them, and then tries to
get a suitable overlay manager to create a crtc which can connect to the
encoders.
We use the dispc_channel field in omap_dss_output to retrieve the desired
overlay manager's channel number, we then check whether the manager had already
been assigned to a crtc or not. If it was already assigned to a crtc, we assume
that out of all the encoders which intend use this crtc, only one will run at a
time. If the overlay manager wan't assigned to a crtc till then, we create a
new crtc and link it with the overlay manager.
This approach just looks for the best dispc_channel for each encoder. On DSS HW,
some encoders can connect to multiple overlay managers. Since we don't try
looking for alternate overlay managers, there is a greater possibility that 2
or more encoders end up asking for the same crtc, causing only one encoder to
run at a time.
Also, this approach isn't the most optimal one, it can do either good or bad
depending on the sequence in which the panels/outputs are parsed. The optimal
way would be some sort of back tracking approach, where we improve the set of
managers we use as we iterate through the list of panels/encoders. That's
something left for later.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 21:45:19 +08:00
|
|
|
|
2015-03-06 23:16:43 +08:00
|
|
|
static int omap_modeset_init_properties(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct omap_drm_private *priv = dev->dev_private;
|
2018-02-13 20:00:42 +08:00
|
|
|
unsigned int num_planes = priv->dispc_ops->get_num_ovls(priv->dispc);
|
2015-03-06 23:16:43 +08:00
|
|
|
|
2017-05-09 06:27:14 +08:00
|
|
|
priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0,
|
|
|
|
num_planes - 1);
|
2015-03-06 23:16:43 +08:00
|
|
|
if (!priv->zorder_prop)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
static int omap_modeset_init(struct drm_device *dev)
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
{
|
|
|
|
struct omap_drm_private *priv = dev->dev_private;
|
2018-02-13 20:00:42 +08:00
|
|
|
int num_ovls = priv->dispc_ops->get_num_ovls(priv->dispc);
|
|
|
|
int num_mgrs = priv->dispc_ops->get_num_mgrs(priv->dispc);
|
2018-02-12 17:44:37 +08:00
|
|
|
unsigned int i;
|
2015-01-11 22:30:44 +08:00
|
|
|
int ret;
|
2017-03-24 22:47:55 +08:00
|
|
|
u32 plane_crtc_mask;
|
2013-05-14 15:55:19 +08:00
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
drm_mode_config_init(dev);
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2015-03-06 23:16:43 +08:00
|
|
|
ret = omap_modeset_init_properties(dev);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
/*
|
2017-03-24 22:47:55 +08:00
|
|
|
* This function creates exactly one connector, encoder, crtc,
|
|
|
|
* and primary plane per each connected dss-device. Each
|
|
|
|
* connector->encoder->crtc chain is expected to be separate
|
|
|
|
* and each crtc is connect to a single dss-channel. If the
|
|
|
|
* configuration does not match the expectations or exceeds
|
|
|
|
* the available resources, the configuration is rejected.
|
2012-12-05 03:59:12 +08:00
|
|
|
*/
|
2018-03-05 21:02:22 +08:00
|
|
|
if (priv->num_pipes > num_mgrs || priv->num_pipes > num_ovls) {
|
2017-03-24 22:47:55 +08:00
|
|
|
dev_err(dev->dev, "%s(): Too many connected displays\n",
|
|
|
|
__func__);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2018-03-06 01:11:30 +08:00
|
|
|
/* Create all planes first. They can all be put to any CRTC. */
|
2018-03-05 21:02:22 +08:00
|
|
|
plane_crtc_mask = (1 << priv->num_pipes) - 1;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2018-03-06 01:11:30 +08:00
|
|
|
for (i = 0; i < num_ovls; i++) {
|
2018-03-05 21:02:22 +08:00
|
|
|
enum drm_plane_type type = i < priv->num_pipes
|
2018-03-06 01:11:30 +08:00
|
|
|
? DRM_PLANE_TYPE_PRIMARY
|
|
|
|
: DRM_PLANE_TYPE_OVERLAY;
|
|
|
|
struct drm_plane *plane;
|
|
|
|
|
|
|
|
if (WARN_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
plane = omap_plane_init(dev, i, type, plane_crtc_mask);
|
|
|
|
if (IS_ERR(plane))
|
|
|
|
return PTR_ERR(plane);
|
|
|
|
|
|
|
|
priv->planes[priv->num_planes++] = plane;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Create the CRTCs, encoders and connectors. */
|
2018-03-05 21:02:22 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
|
|
struct omap_drm_pipeline *pipe = &priv->pipes[i];
|
|
|
|
struct omap_dss_device *display = pipe->display;
|
2012-12-05 03:59:12 +08:00
|
|
|
struct drm_connector *connector;
|
|
|
|
struct drm_encoder *encoder;
|
2017-03-24 22:47:55 +08:00
|
|
|
struct drm_crtc *crtc;
|
2012-11-14 18:30:38 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
encoder = omap_encoder_init(dev, display);
|
2017-03-24 22:47:55 +08:00
|
|
|
if (!encoder)
|
2012-12-05 03:59:12 +08:00
|
|
|
return -ENOMEM;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
connector = omap_connector_init(dev,
|
2018-03-05 21:02:22 +08:00
|
|
|
get_connector_type(display), display, encoder);
|
2017-03-24 22:47:55 +08:00
|
|
|
if (!connector)
|
2012-12-05 03:59:12 +08:00
|
|
|
return -ENOMEM;
|
2012-01-17 02:51:16 +08:00
|
|
|
|
2018-03-07 05:37:25 +08:00
|
|
|
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
|
2017-03-24 22:47:55 +08:00
|
|
|
if (IS_ERR(crtc))
|
|
|
|
return PTR_ERR(crtc);
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2018-07-09 16:40:07 +08:00
|
|
|
drm_connector_attach_encoder(connector, encoder);
|
2018-03-05 20:47:47 +08:00
|
|
|
encoder->possible_crtcs = 1 << i;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
pipe->crtc = crtc;
|
|
|
|
pipe->encoder = encoder;
|
|
|
|
pipe->connector = connector;
|
drm/omap: Fix and improve crtc and overlay manager correlation
The omapdrm driver currently takes a config/module arg to figure out the number
of crtcs it needs to create. We could create as many crtcs as there are overlay
managers in the DSS hardware, but we don't do that because each crtc eats up
one DSS overlay, and that reduces the number of planes we can attach to a single
crtc.
Since the number of crtcs may be lesser than the number of hardware overlay
managers, we need to figure out which overlay managers to use for our crtcs. The
current approach is to use pipe2chan(), which returns a higher numbered manager
for the crtc.
The problem with this approach is that it assumes that the overlay managers we
choose will connect to the encoders the platform's panels are going to use,
this isn't true, an overlay manager connects only to a few outputs/encoders, and
choosing any overlay manager for our crtc might lead to a situation where the
encoder cannot connect to any of the crtcs we have chosen. For example, an
omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the
current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot
connect to the hdmi encoder at all. The only manager that could have connected
to hdmi was the TV overlay manager.
Therefore, there is a need to choose our overlay managers keeping in mind the
panels we have on that platform. The new approach iterates through all the
available panels, creates encoders and connectors for them, and then tries to
get a suitable overlay manager to create a crtc which can connect to the
encoders.
We use the dispc_channel field in omap_dss_output to retrieve the desired
overlay manager's channel number, we then check whether the manager had already
been assigned to a crtc or not. If it was already assigned to a crtc, we assume
that out of all the encoders which intend use this crtc, only one will run at a
time. If the overlay manager wan't assigned to a crtc till then, we create a
new crtc and link it with the overlay manager.
This approach just looks for the best dispc_channel for each encoder. On DSS HW,
some encoders can connect to multiple overlay managers. Since we don't try
looking for alternate overlay managers, there is a greater possibility that 2
or more encoders end up asking for the same crtc, causing only one encoder to
run at a time.
Also, this approach isn't the most optimal one, it can do either good or bad
depending on the sequence in which the panels/outputs are parsed. The optimal
way would be some sort of back tracking approach, where we improve the set of
managers we use as we iterate through the list of panels/encoders. That's
something left for later.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 21:45:19 +08:00
|
|
|
}
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
DBG("registered %u planes, %u crtcs/encoders/connectors\n",
|
|
|
|
priv->num_planes, priv->num_pipes);
|
drm/omap: Fix and improve crtc and overlay manager correlation
The omapdrm driver currently takes a config/module arg to figure out the number
of crtcs it needs to create. We could create as many crtcs as there are overlay
managers in the DSS hardware, but we don't do that because each crtc eats up
one DSS overlay, and that reduces the number of planes we can attach to a single
crtc.
Since the number of crtcs may be lesser than the number of hardware overlay
managers, we need to figure out which overlay managers to use for our crtcs. The
current approach is to use pipe2chan(), which returns a higher numbered manager
for the crtc.
The problem with this approach is that it assumes that the overlay managers we
choose will connect to the encoders the platform's panels are going to use,
this isn't true, an overlay manager connects only to a few outputs/encoders, and
choosing any overlay manager for our crtc might lead to a situation where the
encoder cannot connect to any of the crtcs we have chosen. For example, an
omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the
current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot
connect to the hdmi encoder at all. The only manager that could have connected
to hdmi was the TV overlay manager.
Therefore, there is a need to choose our overlay managers keeping in mind the
panels we have on that platform. The new approach iterates through all the
available panels, creates encoders and connectors for them, and then tries to
get a suitable overlay manager to create a crtc which can connect to the
encoders.
We use the dispc_channel field in omap_dss_output to retrieve the desired
overlay manager's channel number, we then check whether the manager had already
been assigned to a crtc or not. If it was already assigned to a crtc, we assume
that out of all the encoders which intend use this crtc, only one will run at a
time. If the overlay manager wan't assigned to a crtc till then, we create a
new crtc and link it with the overlay manager.
This approach just looks for the best dispc_channel for each encoder. On DSS HW,
some encoders can connect to multiple overlay managers. Since we don't try
looking for alternate overlay managers, there is a greater possibility that 2
or more encoders end up asking for the same crtc, causing only one encoder to
run at a time.
Also, this approach isn't the most optimal one, it can do either good or bad
depending on the sequence in which the panels/outputs are parsed. The optimal
way would be some sort of back tracking approach, where we improve the set of
managers we use as we iterate through the list of panels/encoders. That's
something left for later.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 21:45:19 +08:00
|
|
|
|
2016-08-23 17:35:39 +08:00
|
|
|
dev->mode_config.min_width = 8;
|
|
|
|
dev->mode_config.min_height = 2;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2018-01-10 17:31:18 +08:00
|
|
|
/*
|
|
|
|
* Note: these values are used for multiple independent things:
|
|
|
|
* connector mode filtering, buffer sizes, crtc sizes...
|
|
|
|
* Use big enough values here to cover all use cases, and do more
|
|
|
|
* specific checking in the respective code paths.
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
*/
|
2018-01-10 17:31:18 +08:00
|
|
|
dev->mode_config.max_width = 8192;
|
|
|
|
dev->mode_config.max_height = 8192;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2018-03-21 18:20:29 +08:00
|
|
|
/* We want the zpos to be normalized */
|
|
|
|
dev->mode_config.normalize_zpos = true;
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
dev->mode_config.funcs = &omap_mode_config_funcs;
|
2017-05-09 06:27:10 +08:00
|
|
|
dev->mode_config.helper_private = &omap_mode_config_helper_funcs;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2015-03-06 03:38:16 +08:00
|
|
|
drm_mode_config_reset(dev);
|
|
|
|
|
2015-05-28 05:21:29 +08:00
|
|
|
omap_drm_irq_install(dev);
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-06-02 20:26:35 +08:00
|
|
|
/*
|
|
|
|
* Enable the HPD in external components if supported
|
|
|
|
*/
|
2018-02-12 17:44:37 +08:00
|
|
|
static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
|
2017-06-02 20:26:35 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
|
|
int i;
|
|
|
|
|
2018-05-31 02:46:44 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++)
|
|
|
|
omap_connector_enable_hpd(priv->pipes[i].connector);
|
2017-06-02 20:26:35 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable the HPD in external components if supported
|
|
|
|
*/
|
2018-02-12 17:44:37 +08:00
|
|
|
static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
|
2017-06-02 20:26:35 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
|
|
int i;
|
|
|
|
|
2018-05-31 02:46:44 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++)
|
|
|
|
omap_connector_disable_hpd(priv->pipes[i].connector);
|
2017-06-02 20:26:35 +08:00
|
|
|
}
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
/*
|
|
|
|
* drm ioctl funcs
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
static int ioctl_get_param(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
2012-10-29 16:31:12 +08:00
|
|
|
struct omap_drm_private *priv = dev->dev_private;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
struct drm_omap_param *args = data;
|
|
|
|
|
|
|
|
DBG("%p: param=%llu", dev, args->param);
|
|
|
|
|
|
|
|
switch (args->param) {
|
|
|
|
case OMAP_PARAM_CHIPSET_ID:
|
2012-10-29 16:31:12 +08:00
|
|
|
args->value = priv->omaprev;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
DBG("unknown parameter %lld", args->param);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ioctl_set_param(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct drm_omap_param *args = data;
|
|
|
|
|
|
|
|
switch (args->param) {
|
|
|
|
default:
|
|
|
|
DBG("unknown parameter %lld", args->param);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-12-15 04:39:36 +08:00
|
|
|
#define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
static int ioctl_gem_new(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct drm_omap_gem_new *args = data;
|
2015-12-15 04:39:36 +08:00
|
|
|
u32 flags = args->flags & OMAP_BO_USER_MASK;
|
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
|
2015-12-15 04:39:36 +08:00
|
|
|
args->size.bytes, flags);
|
|
|
|
|
|
|
|
return omap_gem_new_handle(dev, file_priv, args->size, flags,
|
|
|
|
&args->handle);
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ioctl_gem_info(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct drm_omap_gem_info *args = data;
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
int ret = 0;
|
|
|
|
|
2012-12-05 03:59:12 +08:00
|
|
|
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
|
2016-05-09 18:04:54 +08:00
|
|
|
obj = drm_gem_object_lookup(file_priv, args->handle);
|
2012-11-14 18:30:38 +08:00
|
|
|
if (!obj)
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
return -ENOENT;
|
|
|
|
|
2011-12-06 09:19:22 +08:00
|
|
|
args->size = omap_gem_mmap_size(obj);
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
args->offset = omap_gem_mmap_offset(obj);
|
|
|
|
|
|
|
|
drm_gem_object_unreference_unlocked(obj);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-08-03 01:27:49 +08:00
|
|
|
static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
|
2016-06-08 02:23:19 +08:00
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param,
|
|
|
|
DRM_AUTH | DRM_RENDER_ALLOW),
|
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param,
|
|
|
|
DRM_AUTH | DRM_MASTER | DRM_ROOT_ONLY),
|
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new,
|
|
|
|
DRM_AUTH | DRM_RENDER_ALLOW),
|
2017-05-09 06:27:11 +08:00
|
|
|
/* Deprecated, to be removed. */
|
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, drm_noop,
|
2016-06-08 02:23:19 +08:00
|
|
|
DRM_AUTH | DRM_RENDER_ALLOW),
|
2017-05-09 06:27:11 +08:00
|
|
|
/* Deprecated, to be removed. */
|
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, drm_noop,
|
2016-06-08 02:23:19 +08:00
|
|
|
DRM_AUTH | DRM_RENDER_ALLOW),
|
|
|
|
DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info,
|
|
|
|
DRM_AUTH | DRM_RENDER_ALLOW),
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* drm driver funcs
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int dev_open(struct drm_device *dev, struct drm_file *file)
|
|
|
|
{
|
|
|
|
file->driver_priv = NULL;
|
|
|
|
|
|
|
|
DBG("open: dev=%p, file=%p", dev, file);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-05-17 19:27:22 +08:00
|
|
|
static const struct vm_operations_struct omap_gem_vm_ops = {
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
.fault = omap_gem_fault,
|
|
|
|
.open = drm_gem_vm_open,
|
|
|
|
.close = drm_gem_vm_close,
|
|
|
|
};
|
|
|
|
|
2012-01-17 02:51:14 +08:00
|
|
|
static const struct file_operations omapdriver_fops = {
|
2015-01-11 06:02:07 +08:00
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = drm_open,
|
|
|
|
.unlocked_ioctl = drm_ioctl,
|
2017-02-24 19:24:50 +08:00
|
|
|
.compat_ioctl = drm_compat_ioctl,
|
2015-01-11 06:02:07 +08:00
|
|
|
.release = drm_release,
|
|
|
|
.mmap = omap_gem_mmap,
|
|
|
|
.poll = drm_poll,
|
|
|
|
.read = drm_read,
|
|
|
|
.llseek = noop_llseek,
|
2012-01-17 02:51:14 +08:00
|
|
|
};
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
static struct drm_driver omap_drm_driver = {
|
2015-10-02 16:10:41 +08:00
|
|
|
.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
|
2016-06-08 02:23:19 +08:00
|
|
|
DRIVER_ATOMIC | DRIVER_RENDER,
|
2015-01-11 06:02:07 +08:00
|
|
|
.open = dev_open,
|
2017-12-06 02:25:01 +08:00
|
|
|
.lastclose = drm_fb_helper_lastclose,
|
2011-12-16 11:05:17 +08:00
|
|
|
#ifdef CONFIG_DEBUG_FS
|
2015-01-11 06:02:07 +08:00
|
|
|
.debugfs_init = omap_debugfs_init,
|
2011-12-16 11:05:17 +08:00
|
|
|
#endif
|
2015-01-11 06:02:07 +08:00
|
|
|
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
|
|
|
|
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
|
|
|
|
.gem_prime_export = omap_gem_prime_export,
|
|
|
|
.gem_prime_import = omap_gem_prime_import,
|
2018-05-26 00:39:25 +08:00
|
|
|
.gem_free_object_unlocked = omap_gem_free_object,
|
2015-01-11 06:02:07 +08:00
|
|
|
.gem_vm_ops = &omap_gem_vm_ops,
|
|
|
|
.dumb_create = omap_gem_dumb_create,
|
|
|
|
.dumb_map_offset = omap_gem_dumb_map_offset,
|
|
|
|
.ioctls = ioctls,
|
|
|
|
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
|
|
|
|
.fops = &omapdriver_fops,
|
|
|
|
.name = DRIVER_NAME,
|
|
|
|
.desc = DRIVER_DESC,
|
|
|
|
.date = DRIVER_DATE,
|
|
|
|
.major = DRIVER_MAJOR,
|
|
|
|
.minor = DRIVER_MINOR,
|
|
|
|
.patchlevel = DRIVER_PATCHLEVEL,
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
};
|
|
|
|
|
2017-05-06 07:57:12 +08:00
|
|
|
static const struct soc_device_attribute omapdrm_soc_devices[] = {
|
|
|
|
{ .family = "OMAP3", .data = (void *)0x3430 },
|
|
|
|
{ .family = "OMAP4", .data = (void *)0x4430 },
|
|
|
|
{ .family = "OMAP5", .data = (void *)0x5430 },
|
|
|
|
{ .family = "DRA7", .data = (void *)0x0752 },
|
|
|
|
{ /* sentinel */ }
|
|
|
|
};
|
|
|
|
|
2018-02-13 20:00:19 +08:00
|
|
|
static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
{
|
2017-05-06 07:57:12 +08:00
|
|
|
const struct soc_device_attribute *soc;
|
2016-12-12 17:28:47 +08:00
|
|
|
struct drm_device *ddev;
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
|
2018-02-13 20:00:19 +08:00
|
|
|
DBG("%s", dev_name(dev));
|
2013-05-23 17:07:50 +08:00
|
|
|
|
2018-02-12 17:44:36 +08:00
|
|
|
/* Allocate and initialize the DRM device. */
|
|
|
|
ddev = drm_dev_alloc(&omap_drm_driver, dev);
|
|
|
|
if (IS_ERR(ddev))
|
|
|
|
return PTR_ERR(ddev);
|
|
|
|
|
|
|
|
priv->ddev = ddev;
|
|
|
|
ddev->dev_private = priv;
|
|
|
|
|
2018-02-13 20:00:19 +08:00
|
|
|
priv->dev = dev;
|
2018-02-13 20:00:41 +08:00
|
|
|
priv->dss = omapdss_get_dss();
|
2018-02-13 20:00:42 +08:00
|
|
|
priv->dispc = dispc_get_dispc(priv->dss);
|
2018-02-13 20:00:41 +08:00
|
|
|
priv->dispc_ops = dispc_get_ops(priv->dss);
|
2017-08-11 21:49:08 +08:00
|
|
|
|
2018-02-13 20:00:39 +08:00
|
|
|
omap_crtc_pre_init(priv);
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
ret = omap_connect_pipelines(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
if (ret)
|
|
|
|
goto err_crtc_uninit;
|
|
|
|
|
2017-05-06 07:57:12 +08:00
|
|
|
soc = soc_device_match(omapdrm_soc_devices);
|
|
|
|
priv->omaprev = soc ? (unsigned int)soc->data : 0;
|
2016-12-12 17:28:47 +08:00
|
|
|
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
|
|
|
|
|
2018-05-26 00:39:24 +08:00
|
|
|
mutex_init(&priv->list_lock);
|
2016-12-12 17:28:47 +08:00
|
|
|
INIT_LIST_HEAD(&priv->obj_list);
|
|
|
|
|
2017-11-30 20:12:37 +08:00
|
|
|
/* Get memory bandwidth limits */
|
|
|
|
if (priv->dispc_ops->get_memory_bandwidth_limit)
|
|
|
|
priv->max_bandwidth =
|
2018-02-13 20:00:42 +08:00
|
|
|
priv->dispc_ops->get_memory_bandwidth_limit(priv->dispc);
|
2017-11-30 20:12:37 +08:00
|
|
|
|
2016-12-12 17:28:47 +08:00
|
|
|
omap_gem_init(ddev);
|
|
|
|
|
|
|
|
ret = omap_modeset_init(ddev);
|
|
|
|
if (ret) {
|
2018-02-13 20:00:19 +08:00
|
|
|
dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
|
2018-02-12 17:44:36 +08:00
|
|
|
goto err_gem_deinit;
|
2016-12-12 17:28:47 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Initialize vblank handling, start with all CRTCs disabled. */
|
2018-03-05 21:02:22 +08:00
|
|
|
ret = drm_vblank_init(ddev, priv->num_pipes);
|
2016-12-12 17:28:47 +08:00
|
|
|
if (ret) {
|
2018-02-13 20:00:19 +08:00
|
|
|
dev_err(priv->dev, "could not init vblank\n");
|
2016-12-12 17:28:47 +08:00
|
|
|
goto err_cleanup_modeset;
|
drm/omap: fix: Defer probe if an omapdss device requests for it at connect
With the omapdss device model changes. omapdrm is required to call dssdriver's
connect() op to register a panel. This is currently done in omap_modeset_init()
A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI)
they connect to have some resource(like regulators, I2C adapter) missing. If
this happens, the correct approach is to defer omapdrm's probe.
omapdrm currently ignores those panels which return a non zero value when
connected. This could result in omapdrm ignoring all panels on an omap board.
The right approach would be for omapdrm to request for probe deferral when a
panel's connect op returns -EPROBE_DEFER.
In order to do this, we need to call connect() much earlier during omapdrm's
probe to prevent too many things are already done by then. We now connect the
panels during pdev_probe(), before anything else is initialized, so that we
don't need to undo too many things if a defer was requested.
Now when we enter omap_modeset_init(), we have a set of panels that have been
connected. We now proceed with registering only those panels that are already
connected.
A special case has to be considered when no panels are available to connect when
omapdrm probes. In this case too, we defer probe and expect that a panel will be
available to connect the next time.
Checking whether the panel has a driver or whether it has get_timing/read_edid
ops in omap_modeset_init() are redundant with the new display model. These can
be removed since a dssdev device will always have a driver associated with it,
and all dssdev drivers have a get_timings op.
This will mainly fix cases when omapdrm is built-in the kernel, since that's
generally where resources like regulators or I2C are unavailable because of
probe order dependencies.
In particular this fixes boot with omapdrm built-in on an omap4 panda ES board.
The regulators used by HDMI(provided by I2C based TWL regulators) aren't
initialized because I2C isn't initialized, I2C isn't initialized as it's pins
are not configured because pinctrl is yet to probe.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 17:19:51 +08:00
|
|
|
}
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++)
|
|
|
|
drm_crtc_vblank_off(priv->pipes[i].crtc);
|
2016-12-12 17:28:47 +08:00
|
|
|
|
2018-02-09 15:36:23 +08:00
|
|
|
omap_fbdev_init(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
|
|
|
|
drm_kms_helper_poll_init(ddev);
|
2018-02-12 17:44:37 +08:00
|
|
|
omap_modeset_enable_external_hpd(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Register the DRM device with the core and the connectors with
|
|
|
|
* sysfs.
|
|
|
|
*/
|
|
|
|
ret = drm_dev_register(ddev, 0);
|
|
|
|
if (ret)
|
|
|
|
goto err_cleanup_helpers;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_cleanup_helpers:
|
2018-02-12 17:44:37 +08:00
|
|
|
omap_modeset_disable_external_hpd(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
drm_kms_helper_poll_fini(ddev);
|
2018-02-09 15:36:23 +08:00
|
|
|
|
|
|
|
omap_fbdev_fini(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
err_cleanup_modeset:
|
|
|
|
drm_mode_config_cleanup(ddev);
|
|
|
|
omap_drm_irq_uninstall(ddev);
|
2018-02-12 17:44:36 +08:00
|
|
|
err_gem_deinit:
|
2016-12-12 17:28:47 +08:00
|
|
|
omap_gem_deinit(ddev);
|
|
|
|
destroy_workqueue(priv->wq);
|
2018-03-05 21:02:22 +08:00
|
|
|
omap_disconnect_pipelines(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
err_crtc_uninit:
|
2018-03-02 09:05:10 +08:00
|
|
|
omap_crtc_pre_uninit(priv);
|
2018-02-12 17:44:36 +08:00
|
|
|
drm_dev_unref(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
return ret;
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
}
|
|
|
|
|
2018-02-13 20:00:19 +08:00
|
|
|
static void omapdrm_cleanup(struct omap_drm_private *priv)
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
{
|
2018-02-13 20:00:19 +08:00
|
|
|
struct drm_device *ddev = priv->ddev;
|
2016-12-12 17:28:47 +08:00
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
DBG("");
|
2012-03-06 00:48:39 +08:00
|
|
|
|
2016-12-12 17:28:47 +08:00
|
|
|
drm_dev_unregister(ddev);
|
|
|
|
|
2018-02-12 17:44:37 +08:00
|
|
|
omap_modeset_disable_external_hpd(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
drm_kms_helper_poll_fini(ddev);
|
|
|
|
|
2018-02-09 15:36:23 +08:00
|
|
|
omap_fbdev_fini(ddev);
|
2016-12-12 17:28:47 +08:00
|
|
|
|
2017-03-27 15:02:22 +08:00
|
|
|
drm_atomic_helper_shutdown(ddev);
|
|
|
|
|
2016-12-12 17:28:47 +08:00
|
|
|
drm_mode_config_cleanup(ddev);
|
|
|
|
|
|
|
|
omap_drm_irq_uninstall(ddev);
|
|
|
|
omap_gem_deinit(ddev);
|
|
|
|
|
|
|
|
destroy_workqueue(priv->wq);
|
2014-04-02 18:47:43 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
omap_disconnect_pipelines(ddev);
|
2018-03-02 09:05:10 +08:00
|
|
|
omap_crtc_pre_uninit(priv);
|
2018-02-12 17:44:36 +08:00
|
|
|
|
|
|
|
drm_dev_unref(ddev);
|
2018-02-13 20:00:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int pdev_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct omap_drm_private *priv;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (omapdss_is_initialized() == false)
|
|
|
|
return -EPROBE_DEFER;
|
|
|
|
|
|
|
|
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "Failed to set the DMA mask\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate and initialize the driver private structure. */
|
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
|
|
|
|
ret = omapdrm_init(priv, &pdev->dev);
|
|
|
|
if (ret < 0)
|
|
|
|
kfree(priv);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pdev_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct omap_drm_private *priv = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
omapdrm_cleanup(priv);
|
|
|
|
kfree(priv);
|
2013-12-11 18:34:26 +08:00
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-02-26 21:57:17 +08:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2018-02-12 17:44:37 +08:00
|
|
|
static int omap_drm_suspend_all_displays(struct drm_device *ddev)
|
2015-10-02 16:10:42 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
|
|
int i;
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
|
|
struct omap_dss_device *display = priv->pipes[i].display;
|
2015-10-02 16:10:42 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
if (display->state == OMAP_DSS_DISPLAY_ACTIVE) {
|
2018-06-02 00:45:01 +08:00
|
|
|
display->ops->disable(display);
|
2018-03-05 21:02:22 +08:00
|
|
|
display->activate_after_resume = true;
|
2015-10-02 16:10:42 +08:00
|
|
|
} else {
|
2018-03-05 21:02:22 +08:00
|
|
|
display->activate_after_resume = false;
|
2015-10-02 16:10:42 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-02-12 17:44:37 +08:00
|
|
|
static int omap_drm_resume_all_displays(struct drm_device *ddev)
|
2015-10-02 16:10:42 +08:00
|
|
|
{
|
2018-02-12 17:44:37 +08:00
|
|
|
struct omap_drm_private *priv = ddev->dev_private;
|
|
|
|
int i;
|
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
for (i = 0; i < priv->num_pipes; i++) {
|
|
|
|
struct omap_dss_device *display = priv->pipes[i].display;
|
2015-10-02 16:10:42 +08:00
|
|
|
|
2018-03-05 21:02:22 +08:00
|
|
|
if (display->activate_after_resume) {
|
2018-06-02 00:45:01 +08:00
|
|
|
display->ops->enable(display);
|
2018-03-05 21:02:22 +08:00
|
|
|
display->activate_after_resume = false;
|
2015-10-02 16:10:42 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-14 21:18:28 +08:00
|
|
|
static int omap_drm_suspend(struct device *dev)
|
|
|
|
{
|
2018-02-13 20:00:19 +08:00
|
|
|
struct omap_drm_private *priv = dev_get_drvdata(dev);
|
|
|
|
struct drm_device *drm_dev = priv->ddev;
|
2014-11-14 21:18:28 +08:00
|
|
|
|
|
|
|
drm_kms_helper_poll_disable(drm_dev);
|
|
|
|
|
2015-10-02 16:10:42 +08:00
|
|
|
drm_modeset_lock_all(drm_dev);
|
2018-02-12 17:44:37 +08:00
|
|
|
omap_drm_suspend_all_displays(drm_dev);
|
2015-10-02 16:10:42 +08:00
|
|
|
drm_modeset_unlock_all(drm_dev);
|
|
|
|
|
2014-11-14 21:18:28 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int omap_drm_resume(struct device *dev)
|
|
|
|
{
|
2018-02-13 20:00:19 +08:00
|
|
|
struct omap_drm_private *priv = dev_get_drvdata(dev);
|
|
|
|
struct drm_device *drm_dev = priv->ddev;
|
2014-11-14 21:18:28 +08:00
|
|
|
|
2015-10-02 16:10:42 +08:00
|
|
|
drm_modeset_lock_all(drm_dev);
|
2018-02-12 17:44:37 +08:00
|
|
|
omap_drm_resume_all_displays(drm_dev);
|
2015-10-02 16:10:42 +08:00
|
|
|
drm_modeset_unlock_all(drm_dev);
|
|
|
|
|
2014-11-14 21:18:28 +08:00
|
|
|
drm_kms_helper_poll_enable(drm_dev);
|
|
|
|
|
2017-10-13 22:58:58 +08:00
|
|
|
return omap_gem_resume(drm_dev);
|
2014-11-14 21:18:28 +08:00
|
|
|
}
|
2012-12-20 04:53:37 +08:00
|
|
|
#endif
|
|
|
|
|
2015-02-26 21:57:17 +08:00
|
|
|
static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume);
|
|
|
|
|
2013-04-10 15:44:00 +08:00
|
|
|
static struct platform_driver pdev = {
|
2015-01-11 06:02:07 +08:00
|
|
|
.driver = {
|
2017-08-16 17:43:55 +08:00
|
|
|
.name = "omapdrm",
|
2015-01-11 06:02:07 +08:00
|
|
|
.pm = &omapdrm_pm_ops,
|
|
|
|
},
|
|
|
|
.probe = pdev_probe,
|
|
|
|
.remove = pdev_remove,
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
};
|
|
|
|
|
2015-12-03 00:23:31 +08:00
|
|
|
static struct platform_driver * const drivers[] = {
|
|
|
|
&omap_dmm_driver,
|
|
|
|
&pdev,
|
|
|
|
};
|
|
|
|
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
static int __init omap_drm_init(void)
|
|
|
|
{
|
|
|
|
DBG("init");
|
2014-04-02 19:31:50 +08:00
|
|
|
|
2015-12-03 00:23:31 +08:00
|
|
|
return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit omap_drm_fini(void)
|
|
|
|
{
|
|
|
|
DBG("fini");
|
2014-04-02 19:31:50 +08:00
|
|
|
|
2015-12-03 00:23:31 +08:00
|
|
|
platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
|
staging: add omapdrm DRM/KMS driver for TI OMAP platforms
A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev)
and omap_vout (v4l2 display) drivers in the past, this driver uses the
DSS2 driver to access the display hardware, including support for
HDMI, DVI, and various types of LCD panels. And it implements GEM
support for buffer allocation (for KMS as well as offscreen buffers
used by the xf86-video-omap userspace xorg driver).
The driver maps CRTCs to overlays, encoders to overlay-managers, and
connectors to dssdev's. Note that this arrangement might change slightly
when support for drm_plane overlays is added.
For GEM support, non-scanout buffers are using the shmem backed pages
provided by GEM core (In drm_gem_object_init()). In the case of scanout
buffers, which need to be physically contiguous, those are allocated
with CMA and use drm_gem_private_object_init().
See userspace xorg driver:
git://github.com/robclark/xf86-video-omap.git
Refer to this link for CMA (Continuous Memory Allocator):
http://lkml.org/lkml/2011/8/19/302
Links to previous versions of the patch:
v1: http://lwn.net/Articles/458137/
v2: http://patches.linaro.org/4156/
v3: http://patches.linaro.org/4688/
v4: http://patches.linaro.org/4791/
History:
v5: move headers from include/drm at Greg KH's request, minor rebasing
on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages()
because "drm/gem: add functions to get/put pages" patch is not
merged yet
v4: bit of rework of encoder/connector _dpms() code, modeset_init()
rework to not use nested functions, update TODO.txt
v3: minor cleanups, improved error handling for dev_load(), some minor
API changes that will be needed later for tiled buffer support
v2: replace omap_vram with CMA for scanout buffer allocation, remove
unneeded functions, use dma_addr_t for physical addresses, error
handling cleanup, refactor attach/detach pages into common drm
functions, split non-userspace-facing API into omap_priv.h, remove
plugin API
v1: original
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 02:09:40 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* need late_initcall() so we load after dss_driver's are loaded */
|
|
|
|
late_initcall(omap_drm_init);
|
|
|
|
module_exit(omap_drm_fini);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Rob Clark <rob@ti.com>");
|
|
|
|
MODULE_DESCRIPTION("OMAP DRM Display Driver");
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
MODULE_LICENSE("GPL v2");
|