License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2015-11-06 10:49:43 +08:00
|
|
|
* Memory Migration functionality - linux/mm/migrate.c
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Silicon Graphics, Inc., Christoph Lameter
|
|
|
|
*
|
|
|
|
* Page migration was first developed in the context of the memory hotplug
|
|
|
|
* project. The main authors of the migration code are:
|
|
|
|
*
|
|
|
|
* IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
|
|
|
|
* Hirokazu Takahashi <taka@valinux.co.jp>
|
|
|
|
* Dave Hansen <haveblue@us.ibm.com>
|
2008-07-05 00:59:22 +08:00
|
|
|
* Christoph Lameter
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/migrate.h>
|
2011-10-16 14:01:52 +08:00
|
|
|
#include <linux/export.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/swap.h>
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
#include <linux/swapops.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/pagemap.h>
|
2006-04-11 13:52:57 +08:00
|
|
|
#include <linux/buffer_head.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/mm_inline.h>
|
2007-10-19 14:40:14 +08:00
|
|
|
#include <linux/nsproxy.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/pagevec.h>
|
ksm: rmap_walk to remove_migation_ptes
A side-effect of making ksm pages swappable is that they have to be placed
on the LRUs: which then exposes them to isolate_lru_page() and hence to
page migration.
Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and
rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some
consolidation with existing code is possible, but don't attempt that yet
(try_to_unmap needs to handle nonlinears, but migration pte removal does
not).
rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like
remove_anon_migration_ptes() which it replaces, avoids calling
page_lock_anon_vma(), because that includes a page_mapped() test which
fails when all migration ptes are in place. That was valid when NUMA page
migration was introduced (holding mmap_sem provided the missing guarantee
that anon_vma's slab had not already been destroyed), but I believe not
valid in the memory hotremove case added since.
For now do the same as before, and consider the best way to fix that
unlikely race later on. When fixed, we can probably use rmap_walk() on
hwpoisoned ksm pages too: for now, they remain among hwpoison's various
exceptions (its PageKsm test comes before the page is locked, but its
page_lock_anon_vma fails safely if an anon gets upgraded).
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 09:59:31 +08:00
|
|
|
#include <linux/ksm.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/rmap.h>
|
|
|
|
#include <linux/topology.h>
|
|
|
|
#include <linux/cpu.h>
|
|
|
|
#include <linux/cpuset.h>
|
2006-06-23 17:03:38 +08:00
|
|
|
#include <linux/writeback.h>
|
2006-06-23 17:03:55 +08:00
|
|
|
#include <linux/mempolicy.h>
|
|
|
|
#include <linux/vmalloc.h>
|
2006-06-23 17:04:02 +08:00
|
|
|
#include <linux/security.h>
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
#include <linux/backing-dev.h>
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
#include <linux/compaction.h>
|
2008-07-24 12:27:02 +08:00
|
|
|
#include <linux/syscalls.h>
|
2018-03-17 23:08:03 +08:00
|
|
|
#include <linux/compat.h>
|
2010-09-08 09:19:35 +08:00
|
|
|
#include <linux/hugetlb.h>
|
2012-08-01 07:42:27 +08:00
|
|
|
#include <linux/hugetlb_cgroup.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/gfp.h>
|
2017-09-09 07:12:24 +08:00
|
|
|
#include <linux/pfn_t.h>
|
2017-09-09 07:12:17 +08:00
|
|
|
#include <linux/memremap.h>
|
2017-09-09 07:12:21 +08:00
|
|
|
#include <linux/userfaultfd_k.h>
|
2012-12-12 08:02:42 +08:00
|
|
|
#include <linux/balloon_compaction.h>
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 06:35:45 +08:00
|
|
|
#include <linux/page_idle.h>
|
2016-03-16 05:56:15 +08:00
|
|
|
#include <linux/page_owner.h>
|
2017-02-09 01:51:29 +08:00
|
|
|
#include <linux/sched/mm.h>
|
2017-08-21 04:26:27 +08:00
|
|
|
#include <linux/ptrace.h>
|
2020-01-31 14:14:44 +08:00
|
|
|
#include <linux/oom.h>
|
2021-09-03 05:59:09 +08:00
|
|
|
#include <linux/memory.h>
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
#include <linux/random.h>
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
#include <linux/sched/sysctl.h>
|
2022-08-18 21:10:41 +08:00
|
|
|
#include <linux/memory-tiers.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2010-12-22 09:24:26 +08:00
|
|
|
#include <asm/tlbflush.h>
|
|
|
|
|
2012-10-19 21:07:31 +08:00
|
|
|
#include <trace/events/migrate.h>
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
#include "internal.h"
|
|
|
|
|
2023-02-15 18:39:37 +08:00
|
|
|
bool isolate_movable_page(struct page *page, isolate_mode_t mode)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
{
|
2023-01-31 05:43:51 +08:00
|
|
|
struct folio *folio = folio_get_nontail_page(page);
|
2022-06-08 03:38:48 +08:00
|
|
|
const struct movable_operations *mops;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Avoid burning cycles with pages that are yet under __free_pages(),
|
|
|
|
* or just got freed under us.
|
|
|
|
*
|
|
|
|
* In case we 'win' a race for a movable page being freed under us and
|
|
|
|
* raise its refcount preventing __free_pages() from doing its job
|
|
|
|
* the put_page() at the end of this block will take care of
|
|
|
|
* release this page, thus avoiding a nasty leakage.
|
|
|
|
*/
|
2023-01-31 05:43:51 +08:00
|
|
|
if (!folio)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
goto out;
|
|
|
|
|
2023-01-31 05:43:51 +08:00
|
|
|
if (unlikely(folio_test_slab(folio)))
|
|
|
|
goto out_putfolio;
|
2022-11-04 22:57:26 +08:00
|
|
|
/* Pairs with smp_wmb() in slab freeing, e.g. SLUB's __free_slab() */
|
|
|
|
smp_rmb();
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
/*
|
2022-11-04 22:57:26 +08:00
|
|
|
* Check movable flag before taking the page lock because
|
|
|
|
* we use non-atomic bitops on newly allocated page flags so
|
|
|
|
* unconditionally grabbing the lock ruins page's owner side.
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
*/
|
2023-01-31 05:43:51 +08:00
|
|
|
if (unlikely(!__folio_test_movable(folio)))
|
|
|
|
goto out_putfolio;
|
2022-11-04 22:57:26 +08:00
|
|
|
/* Pairs with smp_wmb() in slab allocation, e.g. SLUB's alloc_slab_page() */
|
|
|
|
smp_rmb();
|
2023-01-31 05:43:51 +08:00
|
|
|
if (unlikely(folio_test_slab(folio)))
|
|
|
|
goto out_putfolio;
|
2022-11-04 22:57:26 +08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
/*
|
|
|
|
* As movable pages are not isolated from LRU lists, concurrent
|
|
|
|
* compaction threads can race against page migration functions
|
|
|
|
* as well as race against the releasing a page.
|
|
|
|
*
|
|
|
|
* In order to avoid having an already isolated movable page
|
|
|
|
* being (wrongly) re-isolated while it is under migration,
|
|
|
|
* or to avoid attempting to isolate pages being released,
|
|
|
|
* lets be sure we have the page lock
|
|
|
|
* before proceeding with the movable page isolation steps.
|
|
|
|
*/
|
2023-01-31 05:43:51 +08:00
|
|
|
if (unlikely(!folio_trylock(folio)))
|
|
|
|
goto out_putfolio;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
2023-01-31 05:43:51 +08:00
|
|
|
if (!folio_test_movable(folio) || folio_test_isolated(folio))
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
goto out_no_isolated;
|
|
|
|
|
2023-01-31 05:43:51 +08:00
|
|
|
mops = folio_movable_ops(folio);
|
|
|
|
VM_BUG_ON_FOLIO(!mops, folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
2023-01-31 05:43:51 +08:00
|
|
|
if (!mops->isolate_page(&folio->page, mode))
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
goto out_no_isolated;
|
|
|
|
|
|
|
|
/* Driver shouldn't use PG_isolated bit of page->flags */
|
2023-01-31 05:43:51 +08:00
|
|
|
WARN_ON_ONCE(folio_test_isolated(folio));
|
|
|
|
folio_set_isolated(folio);
|
|
|
|
folio_unlock(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
2023-02-15 18:39:37 +08:00
|
|
|
return true;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
|
|
|
out_no_isolated:
|
2023-01-31 05:43:51 +08:00
|
|
|
folio_unlock(folio);
|
|
|
|
out_putfolio:
|
|
|
|
folio_put(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
out:
|
2023-02-15 18:39:37 +08:00
|
|
|
return false;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
2023-01-31 05:43:52 +08:00
|
|
|
static void putback_movable_folio(struct folio *folio)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
{
|
2023-01-31 05:43:52 +08:00
|
|
|
const struct movable_operations *mops = folio_movable_ops(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
2023-01-31 05:43:52 +08:00
|
|
|
mops->putback_page(&folio->page);
|
|
|
|
folio_clear_isolated(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
2012-12-12 08:02:47 +08:00
|
|
|
/*
|
|
|
|
* Put previously isolated pages back onto the appropriate lists
|
|
|
|
* from where they were once taken off for compaction/migration.
|
|
|
|
*
|
2014-01-22 07:51:17 +08:00
|
|
|
* This function shall be used whenever the isolated pageset has been
|
|
|
|
* built from lru, balloon, hugetlbfs page. See isolate_migratepages_range()
|
2022-05-30 19:30:15 +08:00
|
|
|
* and isolate_hugetlb().
|
2012-12-12 08:02:47 +08:00
|
|
|
*/
|
|
|
|
void putback_movable_pages(struct list_head *l)
|
|
|
|
{
|
2023-01-31 05:43:52 +08:00
|
|
|
struct folio *folio;
|
|
|
|
struct folio *folio2;
|
2012-12-12 08:02:47 +08:00
|
|
|
|
2023-01-31 05:43:52 +08:00
|
|
|
list_for_each_entry_safe(folio, folio2, l, lru) {
|
|
|
|
if (unlikely(folio_test_hugetlb(folio))) {
|
|
|
|
folio_putback_active_hugetlb(folio);
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:21:59 +08:00
|
|
|
continue;
|
|
|
|
}
|
2023-01-31 05:43:52 +08:00
|
|
|
list_del(&folio->lru);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
/*
|
2023-01-31 05:43:52 +08:00
|
|
|
* We isolated non-lru movable folio so here we can use
|
|
|
|
* __PageMovable because LRU folio's mapping cannot have
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* PAGE_MAPPING_MOVABLE.
|
|
|
|
*/
|
2023-01-31 05:43:52 +08:00
|
|
|
if (unlikely(__folio_test_movable(folio))) {
|
|
|
|
VM_BUG_ON_FOLIO(!folio_test_isolated(folio), folio);
|
|
|
|
folio_lock(folio);
|
|
|
|
if (folio_test_movable(folio))
|
|
|
|
putback_movable_folio(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
else
|
2023-01-31 05:43:52 +08:00
|
|
|
folio_clear_isolated(folio);
|
|
|
|
folio_unlock(folio);
|
|
|
|
folio_put(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
} else {
|
2023-01-31 05:43:52 +08:00
|
|
|
node_stat_mod_folio(folio, NR_ISOLATED_ANON +
|
|
|
|
folio_is_file_lru(folio), -folio_nr_pages(folio));
|
|
|
|
folio_putback_lru(folio);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
/*
|
|
|
|
* Restore a potential migration pte to a working pte entry
|
|
|
|
*/
|
2022-01-30 05:06:53 +08:00
|
|
|
static bool remove_migration_pte(struct folio *folio,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr, void *old)
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
DEFINE_FOLIO_VMA_WALK(pvmw, old, vma, addr, PVMW_SYNC | PVMW_MIGRATION);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
while (page_vma_mapped_walk(&pvmw)) {
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 09:20:44 +08:00
|
|
|
rmap_t rmap_flags = RMAP_NONE;
|
2022-01-29 12:32:59 +08:00
|
|
|
pte_t pte;
|
|
|
|
swp_entry_t entry;
|
|
|
|
struct page *new;
|
|
|
|
unsigned long idx = 0;
|
|
|
|
|
|
|
|
/* pgoff is invalid for ksm pages, but they are never large */
|
|
|
|
if (folio_test_large(folio) && !folio_test_hugetlb(folio))
|
|
|
|
idx = linear_page_index(vma, pvmw.address) - pvmw.pgoff;
|
|
|
|
new = folio_page(folio, idx);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-09-09 07:10:57 +08:00
|
|
|
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
|
|
|
|
/* PMD-mapped THP migration entry */
|
|
|
|
if (!pvmw.pte) {
|
2022-01-29 12:32:59 +08:00
|
|
|
VM_BUG_ON_FOLIO(folio_test_hugetlb(folio) ||
|
|
|
|
!folio_test_pmd_mappable(folio), folio);
|
2017-09-09 07:10:57 +08:00
|
|
|
remove_migration_pmd(&pvmw, new);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2022-01-29 12:32:59 +08:00
|
|
|
folio_get(folio);
|
2022-08-12 00:13:29 +08:00
|
|
|
pte = mk_pte(new, READ_ONCE(vma->vm_page_prot));
|
2017-02-25 06:58:16 +08:00
|
|
|
if (pte_swp_soft_dirty(*pvmw.pte))
|
|
|
|
pte = pte_mksoft_dirty(pte);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
entry = pte_to_swp_entry(*pvmw.pte);
|
2022-08-12 00:13:29 +08:00
|
|
|
if (!is_migration_entry_young(entry))
|
|
|
|
pte = pte_mkold(pte);
|
|
|
|
if (folio_test_dirty(folio) && is_migration_entry_dirty(entry))
|
|
|
|
pte = pte_mkdirty(pte);
|
2021-07-01 09:54:09 +08:00
|
|
|
if (is_writable_migration_entry(entry))
|
2023-04-18 22:21:13 +08:00
|
|
|
pte = pte_mkwrite(pte);
|
2020-04-07 11:06:01 +08:00
|
|
|
else if (pte_swp_uffd_wp(*pvmw.pte))
|
|
|
|
pte = pte_mkuffd_wp(pte);
|
2014-10-03 02:47:41 +08:00
|
|
|
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 09:20:44 +08:00
|
|
|
if (folio_test_anon(folio) && !is_readable_migration_entry(entry))
|
|
|
|
rmap_flags |= RMAP_EXCLUSIVE;
|
|
|
|
|
2020-09-05 07:36:04 +08:00
|
|
|
if (unlikely(is_device_private_page(new))) {
|
2021-07-01 09:54:09 +08:00
|
|
|
if (pte_write(pte))
|
|
|
|
entry = make_writable_device_private_entry(
|
|
|
|
page_to_pfn(new));
|
|
|
|
else
|
|
|
|
entry = make_readable_device_private_entry(
|
|
|
|
page_to_pfn(new));
|
2020-09-05 07:36:04 +08:00
|
|
|
pte = swp_entry_to_pte(entry);
|
2020-09-05 07:36:07 +08:00
|
|
|
if (pte_swp_soft_dirty(*pvmw.pte))
|
|
|
|
pte = pte_swp_mksoft_dirty(pte);
|
2020-09-05 07:36:04 +08:00
|
|
|
if (pte_swp_uffd_wp(*pvmw.pte))
|
|
|
|
pte = pte_swp_mkuffd_wp(pte);
|
2019-03-29 11:44:28 +08:00
|
|
|
}
|
2017-09-09 07:12:17 +08:00
|
|
|
|
2010-10-11 22:03:21 +08:00
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:48:00 +08:00
|
|
|
unsigned int shift = huge_page_shift(hstate_vma(vma));
|
|
|
|
|
|
|
|
pte = arch_make_huge_pte(pte, shift, vma->vm_flags);
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_anon(folio))
|
2022-05-10 09:20:43 +08:00
|
|
|
hugepage_add_anon_rmap(new, vma, pvmw.address,
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 09:20:44 +08:00
|
|
|
rmap_flags);
|
2017-02-25 06:58:16 +08:00
|
|
|
else
|
2022-05-10 09:20:43 +08:00
|
|
|
page_dup_file_rmap(new, true);
|
2022-01-15 06:06:29 +08:00
|
|
|
set_huge_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
|
2017-07-07 06:38:41 +08:00
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_anon(folio))
|
2022-05-10 09:20:43 +08:00
|
|
|
page_add_anon_rmap(new, vma, pvmw.address,
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 09:20:44 +08:00
|
|
|
rmap_flags);
|
2017-07-07 06:38:41 +08:00
|
|
|
else
|
mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
inline functions which check (vma->vm_flags & VM_LOCKED) before calling
mlock_page() and munlock_page() in mm/mlock.c.
Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
because we have understandable difficulty in accounting pte maps of THPs,
and if passed a PageHead page, mlock_page() and munlock_page() cannot
tell whether it's a pmd map to be counted or a pte map to be ignored.
Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the
others, and use that to call mlock_vma_page() at the end of the page
adds, and munlock_vma_page() at the end of page_remove_rmap() (end or
beginning? unimportant, but end was easier for assertions in testing).
No page lock is required (although almost all adds happen to hold it):
delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s.
Certainly page lock did serialize with page migration, but I'm having
difficulty explaining why that was ever important.
Mlock accounting on THPs has been hard to define, differed between anon
and file, involved PageDoubleMap in some places and not others, required
clear_page_mlock() at some points. Keep it simple now: just count the
pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
page_add_new_anon_rmap() callers unchanged: they have long been calling
lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED
handling (it also checks for not VM_SPECIAL: I think that's overcautious,
and inconsistent with other checks, that mmap_region() already prevents
VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 10:26:39 +08:00
|
|
|
page_add_file_rmap(new, vma, false);
|
2022-01-15 06:06:29 +08:00
|
|
|
set_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
|
2017-07-07 06:38:41 +08:00
|
|
|
}
|
2022-02-15 10:38:47 +08:00
|
|
|
if (vma->vm_flags & VM_LOCKED)
|
2023-01-12 20:39:31 +08:00
|
|
|
mlock_drain_local();
|
mm, thp: fix mlocking THP page with migration enabled
A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.
If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.
We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.
Introduction of THP migration breaks[1] the rules around mlocking THP
pages. If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.
For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().
Anon THP pages can only be shared between processes via fork(). Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().
For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page. PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.
Test-case:
#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>
int main(void)
{
unsigned long nodemask = 4;
void *addr;
addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);
if (fork()) {
wait(NULL);
return 0;
}
mlock(addr, 4UL << 10);
mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
&nodemask, 4, MPOL_MF_MOVE);
return 0;
}
[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com
Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-06 06:51:41 +08:00
|
|
|
|
2022-03-25 09:10:01 +08:00
|
|
|
trace_remove_migration_pte(pvmw.address, pte_val(pte),
|
|
|
|
compound_order(new));
|
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
/* No need to invalidate - it was non-present before */
|
|
|
|
update_mmu_cache(vma, pvmw.address, pvmw.pte);
|
|
|
|
}
|
2015-11-06 10:49:37 +08:00
|
|
|
|
2017-05-04 05:54:27 +08:00
|
|
|
return true;
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
/*
|
|
|
|
* Get rid of all migration entries and replace them by
|
|
|
|
* references to the indicated page.
|
|
|
|
*/
|
2022-01-29 12:32:59 +08:00
|
|
|
void remove_migration_ptes(struct folio *src, struct folio *dst, bool locked)
|
2006-06-23 17:03:38 +08:00
|
|
|
{
|
2014-01-22 07:49:48 +08:00
|
|
|
struct rmap_walk_control rwc = {
|
|
|
|
.rmap_one = remove_migration_pte,
|
2022-01-29 12:32:59 +08:00
|
|
|
.arg = src,
|
2014-01-22 07:49:48 +08:00
|
|
|
};
|
|
|
|
|
2016-03-18 05:20:07 +08:00
|
|
|
if (locked)
|
2022-01-30 05:06:53 +08:00
|
|
|
rmap_walk_locked(dst, &rwc);
|
2016-03-18 05:20:07 +08:00
|
|
|
else
|
2022-01-30 05:06:53 +08:00
|
|
|
rmap_walk(dst, &rwc);
|
2006-06-23 17:03:38 +08:00
|
|
|
}
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
/*
|
|
|
|
* Something used the pte of a page under migration. We need to
|
|
|
|
* get to the page and wait until migration is finished.
|
|
|
|
* When we return from this function the fault will be retried.
|
|
|
|
*/
|
mm/hugetlb: take page table lock in follow_huge_pmd()
We have a race condition between move_pages() and freeing hugepages, where
move_pages() calls follow_page(FOLL_GET) for hugepages internally and
tries to get its refcount without preventing concurrent freeing. This
race crashes the kernel, so this patch fixes it by moving FOLL_GET code
for hugepages into follow_huge_pmd() with taking the page table lock.
This patch intentionally removes page==NULL check after pte_page.
This is justified because pte_page() never returns NULL for any
architectures or configurations.
This patch changes the behavior of follow_huge_pmd() for tail pages and
then tail pages can be pinned/returned. So the caller must be changed to
properly handle the returned tail pages.
We could have a choice to add the similar locking to
follow_huge_(addr|pud) for consistency, but it's not necessary because
currently these functions don't support FOLL_GET flag, so let's leave it
for future development.
Here is the reproducer:
$ cat movepages.c
#include <stdio.h>
#include <stdlib.h>
#include <numaif.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
#define PS 0x1000
int main(int argc, char *argv[]) {
int i;
int nr_hp = strtol(argv[1], NULL, 0);
int nr_p = nr_hp * HPS / PS;
int ret;
void **addrs;
int *status;
int *nodes;
pid_t pid;
pid = strtol(argv[2], NULL, 0);
addrs = malloc(sizeof(char *) * nr_p + 1);
status = malloc(sizeof(char *) * nr_p + 1);
nodes = malloc(sizeof(char *) * nr_p + 1);
while (1) {
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 1;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 0;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
}
return 0;
}
$ cat hugepage.c
#include <stdio.h>
#include <sys/mman.h>
#include <string.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
int main(int argc, char *argv[]) {
int nr_hp = strtol(argv[1], NULL, 0);
char *p;
while (1) {
p = mmap((void *)ADDR_INPUT, nr_hp * HPS, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (p != (void *)ADDR_INPUT) {
perror("mmap");
break;
}
memset(p, 0, nr_hp * HPS);
munmap(p, nr_hp * HPS);
}
}
$ sysctl vm.nr_hugepages=40
$ ./hugepage 10 &
$ ./movepages 10 $(pgrep -f hugepage)
Fixes: e632a938d914 ("mm: migrate: add hugepage migration code to move_pages()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:25:22 +08:00
|
|
|
void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep,
|
2013-06-13 05:05:04 +08:00
|
|
|
spinlock_t *ptl)
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
{
|
2013-06-13 05:05:04 +08:00
|
|
|
pte_t pte;
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
swp_entry_t entry;
|
|
|
|
|
2013-06-13 05:05:04 +08:00
|
|
|
spin_lock(ptl);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
pte = *ptep;
|
|
|
|
if (!is_swap_pte(pte))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
entry = pte_to_swp_entry(pte);
|
|
|
|
if (!is_migration_entry(entry))
|
|
|
|
goto out;
|
|
|
|
|
2022-01-22 14:10:46 +08:00
|
|
|
migration_entry_wait_on_locked(entry, ptep, ptl);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
return;
|
|
|
|
out:
|
|
|
|
pte_unmap_unlock(ptep, ptl);
|
|
|
|
}
|
|
|
|
|
2013-06-13 05:05:04 +08:00
|
|
|
void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl = pte_lockptr(mm, pmd);
|
|
|
|
pte_t *ptep = pte_offset_map(pmd, address);
|
|
|
|
__migration_entry_wait(mm, ptep, ptl);
|
|
|
|
}
|
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
2022-12-16 23:50:55 +08:00
|
|
|
/*
|
|
|
|
* The vma read lock must be held upon entry. Holding that lock prevents either
|
|
|
|
* the pte or the ptl from being freed.
|
|
|
|
*
|
|
|
|
* This function will release the vma lock before returning.
|
|
|
|
*/
|
|
|
|
void __migration_entry_wait_huge(struct vm_area_struct *vma,
|
|
|
|
pte_t *ptep, spinlock_t *ptl)
|
2013-06-13 05:05:04 +08:00
|
|
|
{
|
2022-05-30 19:30:16 +08:00
|
|
|
pte_t pte;
|
|
|
|
|
2022-12-16 23:50:55 +08:00
|
|
|
hugetlb_vma_assert_locked(vma);
|
2022-05-30 19:30:16 +08:00
|
|
|
spin_lock(ptl);
|
|
|
|
pte = huge_ptep_get(ptep);
|
|
|
|
|
2022-12-16 23:50:55 +08:00
|
|
|
if (unlikely(!is_hugetlb_entry_migration(pte))) {
|
2022-05-30 19:30:16 +08:00
|
|
|
spin_unlock(ptl);
|
2022-12-16 23:50:55 +08:00
|
|
|
hugetlb_vma_unlock_read(vma);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* If migration entry existed, safe to release vma lock
|
|
|
|
* here because the pgtable page won't be freed without the
|
|
|
|
* pgtable lock released. See comment right above pgtable
|
|
|
|
* lock release in migration_entry_wait_on_locked().
|
|
|
|
*/
|
|
|
|
hugetlb_vma_unlock_read(vma);
|
2022-05-30 19:30:16 +08:00
|
|
|
migration_entry_wait_on_locked(pte_to_swp_entry(pte), NULL, ptl);
|
2022-12-16 23:50:55 +08:00
|
|
|
}
|
2013-06-13 05:05:04 +08:00
|
|
|
}
|
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
void migration_entry_wait_huge(struct vm_area_struct *vma, pte_t *pte)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl = huge_pte_lockptr(hstate_vma(vma), vma->vm_mm, pte);
|
|
|
|
|
2022-12-16 23:50:55 +08:00
|
|
|
__migration_entry_wait_huge(vma, pte, ptl);
|
2022-05-30 19:30:16 +08:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2017-09-09 07:10:57 +08:00
|
|
|
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
|
|
|
|
void pmd_migration_entry_wait(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl;
|
|
|
|
|
|
|
|
ptl = pmd_lock(mm, pmd);
|
|
|
|
if (!is_pmd_migration_entry(*pmd))
|
|
|
|
goto unlock;
|
2022-01-22 14:10:46 +08:00
|
|
|
migration_entry_wait_on_locked(pmd_to_swp_entry(*pmd), NULL, ptl);
|
2017-09-09 07:10:57 +08:00
|
|
|
return;
|
|
|
|
unlock:
|
|
|
|
spin_unlock(ptl);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2022-06-07 04:25:10 +08:00
|
|
|
static int folio_expected_refs(struct address_space *mapping,
|
|
|
|
struct folio *folio)
|
2018-12-28 16:39:01 +08:00
|
|
|
{
|
2022-06-07 04:25:10 +08:00
|
|
|
int refs = 1;
|
|
|
|
if (!mapping)
|
|
|
|
return refs;
|
2018-12-28 16:39:01 +08:00
|
|
|
|
2022-06-07 04:25:10 +08:00
|
|
|
refs += folio_nr_pages(folio);
|
|
|
|
if (folio_test_private(folio))
|
|
|
|
refs++;
|
|
|
|
|
|
|
|
return refs;
|
2018-12-28 16:39:01 +08:00
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2006-06-23 17:03:32 +08:00
|
|
|
* Replace the page in the mapping.
|
2006-06-23 17:03:29 +08:00
|
|
|
*
|
|
|
|
* The number of remaining references must be:
|
|
|
|
* 1 for anonymous pages without a mapping
|
|
|
|
* 2 for pages with a mapping
|
2009-04-03 23:42:36 +08:00
|
|
|
* 3 for pages with a mapping and PagePrivate/PagePrivate2 set.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
int folio_migrate_mapping(struct address_space *mapping,
|
|
|
|
struct folio *newfolio, struct folio *folio, int extra_count)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2021-05-07 19:28:40 +08:00
|
|
|
XA_STATE(xas, &mapping->i_pages, folio_index(folio));
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
struct zone *oldzone, *newzone;
|
|
|
|
int dirty;
|
2022-06-07 04:25:10 +08:00
|
|
|
int expected_count = folio_expected_refs(mapping, folio) + extra_count;
|
2021-05-07 19:28:40 +08:00
|
|
|
long nr = folio_nr_pages(folio);
|
2017-09-09 07:12:09 +08:00
|
|
|
|
2006-06-23 17:03:37 +08:00
|
|
|
if (!mapping) {
|
2007-04-24 05:41:09 +08:00
|
|
|
/* Anonymous page without mapping */
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_ref_count(folio) != expected_count)
|
2006-06-23 17:03:37 +08:00
|
|
|
return -EAGAIN;
|
2015-11-06 10:50:02 +08:00
|
|
|
|
|
|
|
/* No turning back from here */
|
2021-05-07 19:28:40 +08:00
|
|
|
newfolio->index = folio->index;
|
|
|
|
newfolio->mapping = folio->mapping;
|
|
|
|
if (folio_test_swapbacked(folio))
|
|
|
|
__folio_set_swapbacked(newfolio);
|
2015-11-06 10:50:02 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2006-06-23 17:03:37 +08:00
|
|
|
}
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
oldzone = folio_zone(folio);
|
|
|
|
newzone = folio_zone(newfolio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_lock_irq(&xas);
|
2021-05-07 19:28:40 +08:00
|
|
|
if (!folio_ref_freeze(folio, expected_count)) {
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2008-07-26 10:45:30 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2021-05-07 19:28:40 +08:00
|
|
|
* Now we know that no one else is looking at the folio:
|
2015-11-06 10:50:02 +08:00
|
|
|
* no turning back from here.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
newfolio->index = folio->index;
|
|
|
|
newfolio->mapping = folio->mapping;
|
|
|
|
folio_ref_add(newfolio, nr); /* add cache reference */
|
|
|
|
if (folio_test_swapbacked(folio)) {
|
|
|
|
__folio_set_swapbacked(newfolio);
|
|
|
|
if (folio_test_swapcache(folio)) {
|
|
|
|
folio_set_swapcache(newfolio);
|
|
|
|
newfolio->private = folio_get_private(folio);
|
2016-12-25 11:00:29 +08:00
|
|
|
}
|
|
|
|
} else {
|
2021-05-07 19:28:40 +08:00
|
|
|
VM_BUG_ON_FOLIO(folio_test_swapcache(folio), folio);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
/* Move dirty while page refs frozen and newpage not yet exposed */
|
2021-05-07 19:28:40 +08:00
|
|
|
dirty = folio_test_dirty(folio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
if (dirty) {
|
2021-05-07 19:28:40 +08:00
|
|
|
folio_clear_dirty(folio);
|
|
|
|
folio_set_dirty(newfolio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
xas_store(&xas, newfolio);
|
2006-12-07 12:33:44 +08:00
|
|
|
|
|
|
|
/*
|
2012-01-11 07:07:11 +08:00
|
|
|
* Drop cache reference from old page by unfreezing
|
|
|
|
* to one less reference.
|
2006-12-07 12:33:44 +08:00
|
|
|
* We know this isn't the last reference.
|
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
folio_ref_unfreeze(folio, expected_count - nr);
|
2006-12-07 12:33:44 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock(&xas);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
/* Leave irq disabled to prevent preemption while updating stats */
|
|
|
|
|
2007-04-24 05:41:09 +08:00
|
|
|
/*
|
|
|
|
* If moved to a different zone then also account
|
|
|
|
* the page for that zone. Other VM counters will be
|
|
|
|
* taken care of when we establish references to the
|
|
|
|
* new page and drop references to the old page.
|
|
|
|
*
|
|
|
|
* Note that anonymous pages are accounted for
|
2016-07-29 06:46:17 +08:00
|
|
|
* via NR_FILE_PAGES and NR_ANON_MAPPED if they
|
2007-04-24 05:41:09 +08:00
|
|
|
* are mapped to swap space.
|
|
|
|
*/
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
if (newzone != oldzone) {
|
2020-06-04 07:01:54 +08:00
|
|
|
struct lruvec *old_lruvec, *new_lruvec;
|
|
|
|
struct mem_cgroup *memcg;
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
memcg = folio_memcg(folio);
|
2020-06-04 07:01:54 +08:00
|
|
|
old_lruvec = mem_cgroup_lruvec(memcg, oldzone->zone_pgdat);
|
|
|
|
new_lruvec = mem_cgroup_lruvec(memcg, newzone->zone_pgdat);
|
|
|
|
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_FILE_PAGES, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_FILE_PAGES, nr);
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_test_swapbacked(folio) && !folio_test_swapcache(folio)) {
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_SHMEM, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_SHMEM, nr);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
2021-02-25 04:03:55 +08:00
|
|
|
#ifdef CONFIG_SWAP
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_test_swapcache(folio)) {
|
2021-02-25 04:03:55 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_SWAPCACHE, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_SWAPCACHE, nr);
|
|
|
|
}
|
|
|
|
#endif
|
2020-09-24 14:51:40 +08:00
|
|
|
if (dirty && mapping_can_writeback(mapping)) {
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_FILE_DIRTY, -nr);
|
|
|
|
__mod_zone_page_state(oldzone, NR_ZONE_WRITE_PENDING, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_FILE_DIRTY, nr);
|
|
|
|
__mod_zone_page_state(newzone, NR_ZONE_WRITE_PENDING, nr);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
2009-09-22 08:01:33 +08:00
|
|
|
}
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
local_irq_enable();
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2021-05-07 19:28:40 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_mapping);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
/*
|
|
|
|
* The expected number of remaining references is the same as that
|
2021-05-07 19:28:40 +08:00
|
|
|
* of folio_migrate_mapping().
|
2010-09-08 09:19:35 +08:00
|
|
|
*/
|
|
|
|
int migrate_huge_page_move_mapping(struct address_space *mapping,
|
2022-06-06 22:47:21 +08:00
|
|
|
struct folio *dst, struct folio *src)
|
2010-09-08 09:19:35 +08:00
|
|
|
{
|
2022-06-06 22:47:21 +08:00
|
|
|
XA_STATE(xas, &mapping->i_pages, folio_index(src));
|
2010-09-08 09:19:35 +08:00
|
|
|
int expected_count;
|
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_lock_irq(&xas);
|
2022-06-06 22:47:21 +08:00
|
|
|
expected_count = 2 + folio_has_private(src);
|
|
|
|
if (!folio_ref_freeze(src, expected_count)) {
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2010-09-08 09:19:35 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2022-06-06 22:47:21 +08:00
|
|
|
dst->index = src->index;
|
|
|
|
dst->mapping = src->mapping;
|
2016-03-16 05:57:19 +08:00
|
|
|
|
2022-06-06 22:47:21 +08:00
|
|
|
folio_get(dst);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-06-06 22:47:21 +08:00
|
|
|
xas_store(&xas, dst);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-06-06 22:47:21 +08:00
|
|
|
folio_ref_unfreeze(src, expected_count - 1);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2016-03-16 05:57:19 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2010-09-08 09:19:35 +08:00
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2021-05-08 03:26:29 +08:00
|
|
|
* Copy the flags and some other ancillary information
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
void folio_migrate_flags(struct folio *newfolio, struct folio *folio)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2013-10-07 18:29:23 +08:00
|
|
|
int cpupid;
|
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_error(folio))
|
|
|
|
folio_set_error(newfolio);
|
|
|
|
if (folio_test_referenced(folio))
|
|
|
|
folio_set_referenced(newfolio);
|
|
|
|
if (folio_test_uptodate(folio))
|
|
|
|
folio_mark_uptodate(newfolio);
|
|
|
|
if (folio_test_clear_active(folio)) {
|
|
|
|
VM_BUG_ON_FOLIO(folio_test_unevictable(folio), folio);
|
|
|
|
folio_set_active(newfolio);
|
|
|
|
} else if (folio_test_clear_unevictable(folio))
|
|
|
|
folio_set_unevictable(newfolio);
|
|
|
|
if (folio_test_workingset(folio))
|
|
|
|
folio_set_workingset(newfolio);
|
|
|
|
if (folio_test_checked(folio))
|
|
|
|
folio_set_checked(newfolio);
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 09:20:44 +08:00
|
|
|
/*
|
|
|
|
* PG_anon_exclusive (-> PG_mappedtodisk) is always migrated via
|
|
|
|
* migration entries. We can still have PG_anon_exclusive set on an
|
|
|
|
* effectively unmapped and unreferenced first sub-pages of an
|
|
|
|
* anonymous THP: we can simply copy it here via PG_mappedtodisk.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_mappedtodisk(folio))
|
|
|
|
folio_set_mappedtodisk(newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
/* Move dirty on pages not done by folio_migrate_mapping() */
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_dirty(folio))
|
|
|
|
folio_set_dirty(newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_young(folio))
|
|
|
|
folio_set_young(newfolio);
|
|
|
|
if (folio_test_idle(folio))
|
|
|
|
folio_set_idle(newfolio);
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 06:35:45 +08:00
|
|
|
|
2013-10-07 18:29:23 +08:00
|
|
|
/*
|
|
|
|
* Copy NUMA information to the new page, to prevent over-eager
|
|
|
|
* future migrations of this same page.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
cpupid = page_cpupid_xchg_last(&folio->page, -1);
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 16:39:51 +08:00
|
|
|
/*
|
|
|
|
* For memory tiering mode, when migrate between slow and fast
|
|
|
|
* memory node, reset cpupid, because that is used to record
|
|
|
|
* page access time in slow memory node.
|
|
|
|
*/
|
|
|
|
if (sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING) {
|
|
|
|
bool f_toptier = node_is_toptier(page_to_nid(&folio->page));
|
|
|
|
bool t_toptier = node_is_toptier(page_to_nid(&newfolio->page));
|
|
|
|
|
|
|
|
if (f_toptier != t_toptier)
|
|
|
|
cpupid = -1;
|
|
|
|
}
|
2021-05-08 03:26:29 +08:00
|
|
|
page_cpupid_xchg_last(&newfolio->page, cpupid);
|
2013-10-07 18:29:23 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
folio_migrate_ksm(newfolio, folio);
|
ksm: make KSM page migration possible
KSM page migration is already supported in the case of memory hotremove,
which takes the ksm_thread_mutex across all its migrations to keep life
simple.
But the new KSM NUMA merge_across_nodes knob introduces a problem, when
it's set to non-default 0: if a KSM page is migrated to a different NUMA
node, how do we migrate its stable node to the right tree? And what if
that collides with an existing stable node?
So far there's no provision for that, and this patch does not attempt to
deal with it either. But how will I test a solution, when I don't know
how to hotremove memory? The best answer is to enable KSM page migration
in all cases now, and test more common cases. With THP and compaction
added since KSM came in, page migration is now mainstream, and it's a
shame that a KSM page can frustrate freeing a page block.
Without worrying about merge_across_nodes 0 for now, this patch gets KSM
page migration working reliably for default merge_across_nodes 1 (but
leave the patch enabling it until near the end of the series).
It's much simpler than I'd originally imagined, and does not require an
additional tier of locking: page migration relies on the page lock, KSM
page reclaim relies on the page lock, the page lock is enough for KSM page
migration too.
Almost all the care has to be in get_ksm_page(): that's the function which
worries about when a stable node is stale and should be freed, now it also
has to worry about the KSM page being migrated.
The only new overhead is an additional put/get/lock/unlock_page when
stable_tree_search() arrives at a matching node: to make sure migration
respects the raised page count, and so does not migrate the page while
we're busy with it here. That's probably avoidable, either by changing
internal interfaces from using kpage to stable_node, or by moving the
ksm_migrate_page() callsite into a page_freeze_refs() section (even if not
swapcache); but this works well, I've no urge to pull it apart now.
(Descents of the stable tree may pass through nodes whose KSM pages are
under migration: being unlocked, the raised page count does not prevent
that, nor need it: it's safe to memcmp against either old or new page.)
You might worry about mremap, and whether page migration's rmap_walk to
remove migration entries will find all the KSM locations where it inserted
earlier: that should already be handled, by the satisfyingly heavy hammer
of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:35:10 +08:00
|
|
|
/*
|
|
|
|
* Please do not reorder this without considering how mm/ksm.c's
|
|
|
|
* get_ksm_page() depends upon ksm_migrate_page() and PageSwapCache().
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_swapcache(folio))
|
|
|
|
folio_clear_swapcache(folio);
|
|
|
|
folio_clear_private(folio);
|
2021-07-01 09:47:21 +08:00
|
|
|
|
|
|
|
/* page->private contains hugetlb specific flags */
|
2021-05-08 03:26:29 +08:00
|
|
|
if (!folio_test_hugetlb(folio))
|
|
|
|
folio->private = NULL;
|
2006-03-22 16:09:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If any waiters have accumulated on the new page then
|
|
|
|
* wake them up.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_writeback(newfolio))
|
|
|
|
folio_end_writeback(newfolio);
|
2016-03-16 05:56:15 +08:00
|
|
|
|
2020-04-07 11:04:21 +08:00
|
|
|
/*
|
|
|
|
* PG_readahead shares the same bit with PG_reclaim. The above
|
|
|
|
* end_page_writeback() may clear PG_readahead mistakenly, so set the
|
|
|
|
* bit after that.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_readahead(folio))
|
|
|
|
folio_set_readahead(newfolio);
|
2020-04-07 11:04:21 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
folio_copy_owner(newfolio, folio);
|
2016-03-16 05:57:54 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (!folio_test_hugetlb(folio))
|
2021-05-07 06:14:59 +08:00
|
|
|
mem_cgroup_migrate(folio, newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2021-05-08 03:26:29 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_flags);
|
2017-09-09 07:12:06 +08:00
|
|
|
|
2021-05-08 03:05:06 +08:00
|
|
|
void folio_migrate_copy(struct folio *newfolio, struct folio *folio)
|
2017-09-09 07:12:06 +08:00
|
|
|
{
|
2021-05-08 03:05:06 +08:00
|
|
|
folio_copy(newfolio, folio);
|
|
|
|
folio_migrate_flags(newfolio, folio);
|
2017-09-09 07:12:06 +08:00
|
|
|
}
|
2021-05-08 03:05:06 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_copy);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2006-06-23 17:03:28 +08:00
|
|
|
/************************************************************
|
|
|
|
* Migration functions
|
|
|
|
***********************************************************/
|
|
|
|
|
2022-09-28 20:01:15 +08:00
|
|
|
int migrate_folio_extra(struct address_space *mapping, struct folio *dst,
|
|
|
|
struct folio *src, enum migrate_mode mode, int extra_count)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
BUG_ON(folio_test_writeback(src)); /* Writeback must be complete */
|
|
|
|
|
|
|
|
rc = folio_migrate_mapping(mapping, dst, src, extra_count);
|
|
|
|
|
|
|
|
if (rc != MIGRATEPAGE_SUCCESS)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (mode != MIGRATE_SYNC_NO_COPY)
|
|
|
|
folio_migrate_copy(dst, src);
|
|
|
|
else
|
|
|
|
folio_migrate_flags(dst, src);
|
|
|
|
return MIGRATEPAGE_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2022-06-06 22:27:41 +08:00
|
|
|
/**
|
|
|
|
* migrate_folio() - Simple folio migration.
|
|
|
|
* @mapping: The address_space containing the folio.
|
|
|
|
* @dst: The folio to migrate the data to.
|
|
|
|
* @src: The folio containing the current data.
|
|
|
|
* @mode: How to migrate the page.
|
|
|
|
*
|
|
|
|
* Common logic to directly migrate a single LRU folio suitable for
|
|
|
|
* folios that do not use PagePrivate/PagePrivate2.
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
2022-06-06 22:27:41 +08:00
|
|
|
* Folios are locked upon entry and exit.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2022-06-06 22:27:41 +08:00
|
|
|
int migrate_folio(struct address_space *mapping, struct folio *dst,
|
|
|
|
struct folio *src, enum migrate_mode mode)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2022-09-28 20:01:15 +08:00
|
|
|
return migrate_folio_extra(mapping, dst, src, mode, 0);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2022-06-06 22:27:41 +08:00
|
|
|
EXPORT_SYMBOL(migrate_folio);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
|
|
|
#ifdef CONFIG_BLOCK
|
2018-12-28 16:39:09 +08:00
|
|
|
/* Returns true if all buffers are successfully locked */
|
|
|
|
static bool buffer_migrate_lock_buffers(struct buffer_head *head,
|
|
|
|
enum migrate_mode mode)
|
|
|
|
{
|
|
|
|
struct buffer_head *bh = head;
|
|
|
|
|
|
|
|
/* Simple case, sync compaction */
|
|
|
|
if (mode != MIGRATE_ASYNC) {
|
|
|
|
do {
|
|
|
|
lock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
|
|
|
|
} while (bh != head);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* async case, we cannot block on lock_buffer so use trylock_buffer */
|
|
|
|
do {
|
|
|
|
if (!trylock_buffer(bh)) {
|
|
|
|
/*
|
|
|
|
* We failed to lock the buffer and cannot stall in
|
|
|
|
* async migration. Release the taken locks
|
|
|
|
*/
|
|
|
|
struct buffer_head *failed_bh = bh;
|
|
|
|
bh = head;
|
|
|
|
while (bh != failed_bh) {
|
|
|
|
unlock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2022-06-06 22:20:31 +08:00
|
|
|
static int __buffer_migrate_folio(struct address_space *mapping,
|
|
|
|
struct folio *dst, struct folio *src, enum migrate_mode mode,
|
2018-12-28 16:39:12 +08:00
|
|
|
bool check_refs)
|
2006-06-23 17:03:28 +08:00
|
|
|
{
|
|
|
|
struct buffer_head *bh, *head;
|
|
|
|
int rc;
|
2018-12-28 16:39:05 +08:00
|
|
|
int expected_count;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2022-06-06 22:20:31 +08:00
|
|
|
head = folio_buffers(src);
|
|
|
|
if (!head)
|
2022-06-06 22:27:41 +08:00
|
|
|
return migrate_folio(mapping, dst, src, mode);
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
/* Check whether page does not have extra refs before we do more work */
|
2022-06-07 04:25:10 +08:00
|
|
|
expected_count = folio_expected_refs(mapping, src);
|
2022-06-06 22:20:31 +08:00
|
|
|
if (folio_ref_count(src) != expected_count)
|
2018-12-28 16:39:05 +08:00
|
|
|
return -EAGAIN;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
if (!buffer_migrate_lock_buffers(head, mode))
|
|
|
|
return -EAGAIN;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:12 +08:00
|
|
|
if (check_refs) {
|
|
|
|
bool busy;
|
|
|
|
bool invalidated = false;
|
|
|
|
|
|
|
|
recheck_buffers:
|
|
|
|
busy = false;
|
|
|
|
spin_lock(&mapping->private_lock);
|
|
|
|
bh = head;
|
|
|
|
do {
|
|
|
|
if (atomic_read(&bh->b_count)) {
|
|
|
|
busy = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
if (busy) {
|
|
|
|
if (invalidated) {
|
|
|
|
rc = -EAGAIN;
|
|
|
|
goto unlock_buffers;
|
|
|
|
}
|
2019-08-03 12:48:47 +08:00
|
|
|
spin_unlock(&mapping->private_lock);
|
2018-12-28 16:39:12 +08:00
|
|
|
invalidate_bh_lrus();
|
|
|
|
invalidated = true;
|
|
|
|
goto recheck_buffers;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-06-06 22:20:31 +08:00
|
|
|
rc = folio_migrate_mapping(mapping, dst, src, 0);
|
2012-12-12 08:02:31 +08:00
|
|
|
if (rc != MIGRATEPAGE_SUCCESS)
|
2018-12-28 16:39:05 +08:00
|
|
|
goto unlock_buffers;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2022-06-06 22:20:31 +08:00
|
|
|
folio_attach_private(dst, folio_detach_private(src));
|
2006-06-23 17:03:28 +08:00
|
|
|
|
|
|
|
bh = head;
|
|
|
|
do {
|
2022-06-06 22:20:31 +08:00
|
|
|
set_bh_page(bh, &dst->page, bh_offset(bh));
|
2006-06-23 17:03:28 +08:00
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
|
2017-09-09 07:12:06 +08:00
|
|
|
if (mode != MIGRATE_SYNC_NO_COPY)
|
2022-06-06 22:20:31 +08:00
|
|
|
folio_migrate_copy(dst, src);
|
2017-09-09 07:12:06 +08:00
|
|
|
else
|
2022-06-06 22:20:31 +08:00
|
|
|
folio_migrate_flags(dst, src);
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
rc = MIGRATEPAGE_SUCCESS;
|
|
|
|
unlock_buffers:
|
2019-08-03 12:48:47 +08:00
|
|
|
if (check_refs)
|
|
|
|
spin_unlock(&mapping->private_lock);
|
2006-06-23 17:03:28 +08:00
|
|
|
bh = head;
|
|
|
|
do {
|
|
|
|
unlock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
return rc;
|
2006-06-23 17:03:28 +08:00
|
|
|
}
|
2018-12-28 16:39:12 +08:00
|
|
|
|
2022-06-06 22:20:31 +08:00
|
|
|
/**
|
|
|
|
* buffer_migrate_folio() - Migration function for folios with buffers.
|
|
|
|
* @mapping: The address space containing @src.
|
|
|
|
* @dst: The folio to migrate to.
|
|
|
|
* @src: The folio to migrate from.
|
|
|
|
* @mode: How to migrate the folio.
|
|
|
|
*
|
|
|
|
* This function can only be used if the underlying filesystem guarantees
|
|
|
|
* that no other references to @src exist. For example attached buffer
|
|
|
|
* heads are accessed only under the folio lock. If your filesystem cannot
|
|
|
|
* provide this guarantee, buffer_migrate_folio_norefs() may be more
|
|
|
|
* appropriate.
|
|
|
|
*
|
|
|
|
* Return: 0 on success or a negative errno on failure.
|
2018-12-28 16:39:12 +08:00
|
|
|
*/
|
2022-06-06 22:20:31 +08:00
|
|
|
int buffer_migrate_folio(struct address_space *mapping,
|
|
|
|
struct folio *dst, struct folio *src, enum migrate_mode mode)
|
2018-12-28 16:39:12 +08:00
|
|
|
{
|
2022-06-06 22:20:31 +08:00
|
|
|
return __buffer_migrate_folio(mapping, dst, src, mode, false);
|
2018-12-28 16:39:12 +08:00
|
|
|
}
|
2022-06-06 22:20:31 +08:00
|
|
|
EXPORT_SYMBOL(buffer_migrate_folio);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* buffer_migrate_folio_norefs() - Migration function for folios with buffers.
|
|
|
|
* @mapping: The address space containing @src.
|
|
|
|
* @dst: The folio to migrate to.
|
|
|
|
* @src: The folio to migrate from.
|
|
|
|
* @mode: How to migrate the folio.
|
|
|
|
*
|
|
|
|
* Like buffer_migrate_folio() except that this variant is more careful
|
|
|
|
* and checks that there are also no buffer head references. This function
|
|
|
|
* is the right one for mappings where buffer heads are directly looked
|
|
|
|
* up and referenced (such as block device mappings).
|
|
|
|
*
|
|
|
|
* Return: 0 on success or a negative errno on failure.
|
2018-12-28 16:39:12 +08:00
|
|
|
*/
|
2022-06-06 22:20:31 +08:00
|
|
|
int buffer_migrate_folio_norefs(struct address_space *mapping,
|
|
|
|
struct folio *dst, struct folio *src, enum migrate_mode mode)
|
2018-12-28 16:39:12 +08:00
|
|
|
{
|
2022-06-06 22:20:31 +08:00
|
|
|
return __buffer_migrate_folio(mapping, dst, src, mode, true);
|
2018-12-28 16:39:12 +08:00
|
|
|
}
|
2022-12-07 19:27:14 +08:00
|
|
|
EXPORT_SYMBOL_GPL(buffer_migrate_folio_norefs);
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
|
|
|
#endif
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2022-06-07 00:55:08 +08:00
|
|
|
int filemap_migrate_folio(struct address_space *mapping,
|
|
|
|
struct folio *dst, struct folio *src, enum migrate_mode mode)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = folio_migrate_mapping(mapping, dst, src, 0);
|
|
|
|
if (ret != MIGRATEPAGE_SUCCESS)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (folio_get_private(src))
|
|
|
|
folio_attach_private(dst, folio_detach_private(src));
|
|
|
|
|
|
|
|
if (mode != MIGRATE_SYNC_NO_COPY)
|
|
|
|
folio_migrate_copy(dst, src);
|
|
|
|
else
|
|
|
|
folio_migrate_flags(dst, src);
|
|
|
|
return MIGRATEPAGE_SUCCESS;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(filemap_migrate_folio);
|
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
/*
|
2022-06-06 21:41:03 +08:00
|
|
|
* Writeback a folio to clean the dirty state
|
2006-06-23 17:03:38 +08:00
|
|
|
*/
|
2022-06-06 21:41:03 +08:00
|
|
|
static int writeout(struct address_space *mapping, struct folio *folio)
|
2006-06-23 17:03:33 +08:00
|
|
|
{
|
2006-06-23 17:03:38 +08:00
|
|
|
struct writeback_control wbc = {
|
|
|
|
.sync_mode = WB_SYNC_NONE,
|
|
|
|
.nr_to_write = 1,
|
|
|
|
.range_start = 0,
|
|
|
|
.range_end = LLONG_MAX,
|
|
|
|
.for_reclaim = 1
|
|
|
|
};
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!mapping->a_ops->writepage)
|
|
|
|
/* No write method for the address space */
|
|
|
|
return -EINVAL;
|
|
|
|
|
2022-06-06 21:41:03 +08:00
|
|
|
if (!folio_clear_dirty_for_io(folio))
|
2006-06-23 17:03:38 +08:00
|
|
|
/* Someone else already triggered a write */
|
|
|
|
return -EAGAIN;
|
|
|
|
|
2006-06-23 17:03:33 +08:00
|
|
|
/*
|
2022-06-06 21:41:03 +08:00
|
|
|
* A dirty folio may imply that the underlying filesystem has
|
|
|
|
* the folio on some queue. So the folio must be clean for
|
|
|
|
* migration. Writeout may mean we lose the lock and the
|
|
|
|
* folio state is no longer what we checked for earlier.
|
2006-06-23 17:03:38 +08:00
|
|
|
* At this point we know that the migration attempt cannot
|
|
|
|
* be successful.
|
2006-06-23 17:03:33 +08:00
|
|
|
*/
|
2022-01-29 12:32:59 +08:00
|
|
|
remove_migration_ptes(folio, folio, false);
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2022-06-06 21:41:03 +08:00
|
|
|
rc = mapping->a_ops->writepage(&folio->page, &wbc);
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
if (rc != AOP_WRITEPAGE_ACTIVATE)
|
|
|
|
/* unlocked. Relock */
|
2022-06-06 21:41:03 +08:00
|
|
|
folio_lock(folio);
|
2006-06-23 17:03:38 +08:00
|
|
|
|
2008-11-20 07:36:36 +08:00
|
|
|
return (rc < 0) ? -EIO : -EAGAIN;
|
2006-06-23 17:03:38 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Default handling if a filesystem does not provide a migration function.
|
|
|
|
*/
|
2022-06-06 21:34:36 +08:00
|
|
|
static int fallback_migrate_folio(struct address_space *mapping,
|
|
|
|
struct folio *dst, struct folio *src, enum migrate_mode mode)
|
2006-06-23 17:03:38 +08:00
|
|
|
{
|
2022-06-06 21:34:36 +08:00
|
|
|
if (folio_test_dirty(src)) {
|
|
|
|
/* Only writeback folios in full synchronous migration */
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
2012-01-13 09:19:34 +08:00
|
|
|
return -EBUSY;
|
2017-09-09 07:12:06 +08:00
|
|
|
}
|
2022-06-06 21:41:03 +08:00
|
|
|
return writeout(mapping, src);
|
2012-01-13 09:19:34 +08:00
|
|
|
}
|
2006-06-23 17:03:33 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Buffers may be managed in a filesystem specific way.
|
|
|
|
* We must have no buffers or drop them.
|
|
|
|
*/
|
2022-06-06 21:34:36 +08:00
|
|
|
if (folio_test_private(src) &&
|
|
|
|
!filemap_release_folio(src, GFP_KERNEL))
|
2019-03-06 07:44:43 +08:00
|
|
|
return mode == MIGRATE_SYNC ? -EAGAIN : -EBUSY;
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2022-06-06 22:27:41 +08:00
|
|
|
return migrate_folio(mapping, dst, src, mode);
|
2006-06-23 17:03:33 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
|
|
|
* Move a page to a newly allocated page
|
|
|
|
* The page is locked and all ptes have been successfully removed.
|
|
|
|
*
|
|
|
|
* The new page will have replaced the old page if this function
|
|
|
|
* is successful.
|
Unevictable LRU Infrastructure
When the system contains lots of mlocked or otherwise unevictable pages,
the pageout code (kswapd) can spend lots of time scanning over these
pages. Worse still, the presence of lots of unevictable pages can confuse
kswapd into thinking that more aggressive pageout modes are required,
resulting in all kinds of bad behaviour.
Infrastructure to manage pages excluded from reclaim--i.e., hidden from
vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to
maintain "unevictable" pages on a separate per-zone LRU list, to "hide"
them from vmscan.
Kosaki Motohiro added the support for the memory controller unevictable
lru list.
Pages on the unevictable list have both PG_unevictable and PG_lru set.
Thus, PG_unevictable is analogous to and mutually exclusive with
PG_active--it specifies which LRU list the page is on.
The unevictable infrastructure is enabled by a new mm Kconfig option
[CONFIG_]UNEVICTABLE_LRU.
A new function 'page_evictable(page, vma)' in vmscan.c tests whether or
not a page may be evictable. Subsequent patches will add the various
!evictable tests. We'll want to keep these tests light-weight for use in
shrink_active_list() and, possibly, the fault path.
To avoid races between tasks putting pages [back] onto an LRU list and
tasks that might be moving the page from non-evictable to evictable state,
the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()'
-- tests the "evictability" of a page after placing it on the LRU, before
dropping the reference. If the page has become unevictable,
putback_lru_page() will redo the 'putback', thus moving the page to the
unevictable list. This way, we avoid "stranding" evictable pages on the
unevictable list.
[akpm@linux-foundation.org: fix fallout from out-of-order merge]
[riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build]
[nishimura@mxp.nes.nec.co.jp: remove redundant mapping check]
[kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework]
[kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c]
[kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure]
[kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch]
[kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:26:39 +08:00
|
|
|
*
|
|
|
|
* Return value:
|
|
|
|
* < 0 - error code
|
2012-12-12 08:02:31 +08:00
|
|
|
* MIGRATEPAGE_SUCCESS - success
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
2022-05-13 11:23:05 +08:00
|
|
|
static int move_to_new_folio(struct folio *dst, struct folio *src,
|
2015-11-06 10:49:53 +08:00
|
|
|
enum migrate_mode mode)
|
2006-06-23 17:03:51 +08:00
|
|
|
{
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
int rc = -EAGAIN;
|
2022-05-13 11:23:05 +08:00
|
|
|
bool is_lru = !__PageMovable(&src->page);
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2022-05-13 11:23:05 +08:00
|
|
|
VM_BUG_ON_FOLIO(!folio_test_locked(src), src);
|
|
|
|
VM_BUG_ON_FOLIO(!folio_test_locked(dst), dst);
|
2006-06-23 17:03:51 +08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (likely(is_lru)) {
|
2022-06-08 03:38:48 +08:00
|
|
|
struct address_space *mapping = folio_mapping(src);
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (!mapping)
|
2022-06-06 22:27:41 +08:00
|
|
|
rc = migrate_folio(mapping, dst, src, mode);
|
2022-06-06 21:00:16 +08:00
|
|
|
else if (mapping->a_ops->migrate_folio)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
/*
|
2022-06-06 21:00:16 +08:00
|
|
|
* Most folios have a mapping and most filesystems
|
|
|
|
* provide a migrate_folio callback. Anonymous folios
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* are part of swap space which also has its own
|
2022-06-06 21:00:16 +08:00
|
|
|
* migrate_folio callback. This is the most common path
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* for page migration.
|
|
|
|
*/
|
2022-06-06 21:00:16 +08:00
|
|
|
rc = mapping->a_ops->migrate_folio(mapping, dst, src,
|
|
|
|
mode);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
else
|
2022-06-06 21:34:36 +08:00
|
|
|
rc = fallback_migrate_folio(mapping, dst, src, mode);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
} else {
|
2022-06-08 03:38:48 +08:00
|
|
|
const struct movable_operations *mops;
|
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* In case of non-lru page, it could be released after
|
|
|
|
* isolation step. In that case, we shouldn't try migration.
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
2022-05-13 11:23:05 +08:00
|
|
|
VM_BUG_ON_FOLIO(!folio_test_isolated(src), src);
|
|
|
|
if (!folio_test_movable(src)) {
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
rc = MIGRATEPAGE_SUCCESS;
|
2022-05-13 11:23:05 +08:00
|
|
|
folio_clear_isolated(src);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2023-01-31 05:43:50 +08:00
|
|
|
mops = folio_movable_ops(src);
|
2022-06-08 03:38:48 +08:00
|
|
|
rc = mops->migrate_page(&dst->page, &src->page, mode);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
WARN_ON_ONCE(rc == MIGRATEPAGE_SUCCESS &&
|
2022-05-13 11:23:05 +08:00
|
|
|
!folio_test_isolated(src));
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2015-11-06 10:49:53 +08:00
|
|
|
/*
|
2022-05-13 11:23:05 +08:00
|
|
|
* When successful, old pagecache src->mapping must be cleared before
|
|
|
|
* src is freed; but stats require that PageAnon be left as PageAnon.
|
2015-11-06 10:49:53 +08:00
|
|
|
*/
|
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
2022-05-13 11:23:05 +08:00
|
|
|
if (__PageMovable(&src->page)) {
|
|
|
|
VM_BUG_ON_FOLIO(!folio_test_isolated(src), src);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We clear PG_movable under page_lock so any compactor
|
|
|
|
* cannot try to migrate this page.
|
|
|
|
*/
|
2022-05-13 11:23:05 +08:00
|
|
|
folio_clear_isolated(src);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2022-05-13 11:23:05 +08:00
|
|
|
* Anonymous and movable src->mapping will be cleared by
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* free_pages_prepare so don't reset it here for keeping
|
|
|
|
* the type to work PageAnon, for example.
|
|
|
|
*/
|
2022-05-13 11:23:05 +08:00
|
|
|
if (!folio_mapping_flags(src))
|
|
|
|
src->mapping = NULL;
|
2019-03-29 11:44:28 +08:00
|
|
|
|
2022-05-13 11:23:05 +08:00
|
|
|
if (likely(!folio_is_zone_device(dst)))
|
|
|
|
flush_dcache_folio(dst);
|
2010-05-25 05:32:20 +08:00
|
|
|
}
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
out:
|
2006-06-23 17:03:51 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
/*
|
|
|
|
* To record some information during migration, we use some unused
|
|
|
|
* fields (mapping and private) of struct folio of the newly allocated
|
|
|
|
* destination folio. This is safe because nobody is using them
|
|
|
|
* except us.
|
|
|
|
*/
|
mm: avoid gcc complaint about pointer casting
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05 06:03:27 +08:00
|
|
|
union migration_ptr {
|
|
|
|
struct anon_vma *anon_vma;
|
|
|
|
struct address_space *mapping;
|
|
|
|
};
|
2023-02-13 20:34:39 +08:00
|
|
|
static void __migrate_folio_record(struct folio *dst,
|
|
|
|
unsigned long page_was_mapped,
|
|
|
|
struct anon_vma *anon_vma)
|
|
|
|
{
|
mm: avoid gcc complaint about pointer casting
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05 06:03:27 +08:00
|
|
|
union migration_ptr ptr = { .anon_vma = anon_vma };
|
|
|
|
dst->mapping = ptr.mapping;
|
2023-02-13 20:34:39 +08:00
|
|
|
dst->private = (void *)page_was_mapped;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __migrate_folio_extract(struct folio *dst,
|
|
|
|
int *page_was_mappedp,
|
|
|
|
struct anon_vma **anon_vmap)
|
|
|
|
{
|
mm: avoid gcc complaint about pointer casting
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-05 06:03:27 +08:00
|
|
|
union migration_ptr ptr = { .mapping = dst->mapping };
|
|
|
|
*anon_vmap = ptr.anon_vma;
|
2023-02-13 20:34:39 +08:00
|
|
|
*page_was_mappedp = (unsigned long)dst->private;
|
|
|
|
dst->mapping = NULL;
|
|
|
|
dst->private = NULL;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
/* Restore the source folio to the original state upon failure */
|
|
|
|
static void migrate_folio_undo_src(struct folio *src,
|
|
|
|
int page_was_mapped,
|
|
|
|
struct anon_vma *anon_vma,
|
2023-02-13 20:34:42 +08:00
|
|
|
bool locked,
|
2023-02-13 20:34:40 +08:00
|
|
|
struct list_head *ret)
|
|
|
|
{
|
|
|
|
if (page_was_mapped)
|
|
|
|
remove_migration_ptes(src, src, false);
|
|
|
|
/* Drop an anon_vma reference if we took one */
|
|
|
|
if (anon_vma)
|
|
|
|
put_anon_vma(anon_vma);
|
2023-02-13 20:34:42 +08:00
|
|
|
if (locked)
|
|
|
|
folio_unlock(src);
|
|
|
|
if (ret)
|
|
|
|
list_move_tail(&src->lru, ret);
|
2023-02-13 20:34:40 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Restore the destination folio to the original state upon failure */
|
|
|
|
static void migrate_folio_undo_dst(struct folio *dst,
|
2023-02-13 20:34:42 +08:00
|
|
|
bool locked,
|
2023-02-13 20:34:40 +08:00
|
|
|
free_page_t put_new_page,
|
|
|
|
unsigned long private)
|
|
|
|
{
|
2023-02-13 20:34:42 +08:00
|
|
|
if (locked)
|
|
|
|
folio_unlock(dst);
|
2023-02-13 20:34:40 +08:00
|
|
|
if (put_new_page)
|
|
|
|
put_new_page(&dst->page, private);
|
|
|
|
else
|
|
|
|
folio_put(dst);
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
/* Cleanup src folio upon migration success */
|
|
|
|
static void migrate_folio_done(struct folio *src,
|
|
|
|
enum migrate_reason reason)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Compaction can migrate also non-LRU pages which are
|
|
|
|
* not accounted to NR_ISOLATED_*. They can be recognized
|
|
|
|
* as __PageMovable
|
|
|
|
*/
|
|
|
|
if (likely(!__folio_test_movable(src)))
|
|
|
|
mod_node_page_state(folio_pgdat(src), NR_ISOLATED_ANON +
|
|
|
|
folio_is_file_lru(src), -folio_nr_pages(src));
|
|
|
|
|
|
|
|
if (reason != MR_MEMORY_FAILURE)
|
|
|
|
/* We release the page in page_handle_poison. */
|
|
|
|
folio_put(src);
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
/* Obtain the lock on page, remove all ptes. */
|
|
|
|
static int migrate_folio_unmap(new_page_t get_new_page, free_page_t put_new_page,
|
|
|
|
unsigned long private, struct folio *src,
|
2023-03-03 11:01:55 +08:00
|
|
|
struct folio **dstp, enum migrate_mode mode,
|
|
|
|
enum migrate_reason reason, struct list_head *ret)
|
2006-06-23 17:03:51 +08:00
|
|
|
{
|
2023-02-13 20:34:42 +08:00
|
|
|
struct folio *dst;
|
2011-11-01 08:06:57 +08:00
|
|
|
int rc = -EAGAIN;
|
2023-02-13 20:34:42 +08:00
|
|
|
struct page *newpage = NULL;
|
2023-02-13 20:34:39 +08:00
|
|
|
int page_was_mapped = 0;
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:17 +08:00
|
|
|
struct anon_vma *anon_vma = NULL;
|
2022-09-03 03:46:46 +08:00
|
|
|
bool is_lru = !__PageMovable(&src->page);
|
2023-02-13 20:34:42 +08:00
|
|
|
bool locked = false;
|
|
|
|
bool dst_locked = false;
|
|
|
|
|
|
|
|
if (folio_ref_count(src) == 1) {
|
|
|
|
/* Folio was freed from under us. So we are done. */
|
|
|
|
folio_clear_active(src);
|
|
|
|
folio_clear_unevictable(src);
|
|
|
|
/* free_pages_prepare() will clear PG_isolated. */
|
|
|
|
list_del(&src->lru);
|
|
|
|
migrate_folio_done(src, reason);
|
|
|
|
return MIGRATEPAGE_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
newpage = get_new_page(&src->page, private);
|
|
|
|
if (!newpage)
|
|
|
|
return -ENOMEM;
|
|
|
|
dst = page_folio(newpage);
|
|
|
|
*dstp = dst;
|
|
|
|
|
|
|
|
dst->private = NULL;
|
2006-06-23 17:03:53 +08:00
|
|
|
|
2022-09-03 03:46:46 +08:00
|
|
|
if (!folio_trylock(src)) {
|
2023-03-03 11:01:55 +08:00
|
|
|
if (mode == MIGRATE_ASYNC)
|
2011-11-01 08:06:57 +08:00
|
|
|
goto out;
|
2011-01-14 07:45:56 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* It's not safe for direct compaction to call lock_page.
|
|
|
|
* For example, during page readahead pages are added locked
|
|
|
|
* to the LRU. Later, when the IO completes the pages are
|
|
|
|
* marked uptodate and unlocked. However, the queueing
|
|
|
|
* could be merging multiple pages for one bio (e.g.
|
fs: convert mpage_readpages to mpage_readahead
Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).
The callers are all trivial except for GFS2 & OCFS2.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 12:47:02 +08:00
|
|
|
* mpage_readahead). If an allocation happens for the
|
2011-01-14 07:45:56 +08:00
|
|
|
* second or third page, the process can end up locking
|
|
|
|
* the same page twice and deadlocking. Rather than
|
|
|
|
* trying to be clever about what pages can be locked,
|
|
|
|
* avoid the use of lock_page for direct compaction
|
|
|
|
* altogether.
|
|
|
|
*/
|
|
|
|
if (current->flags & PF_MEMALLOC)
|
2011-11-01 08:06:57 +08:00
|
|
|
goto out;
|
2011-01-14 07:45:56 +08:00
|
|
|
|
2022-09-03 03:46:46 +08:00
|
|
|
folio_lock(src);
|
2006-06-23 17:03:51 +08:00
|
|
|
}
|
2023-02-13 20:34:42 +08:00
|
|
|
locked = true;
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2022-09-03 03:46:46 +08:00
|
|
|
if (folio_test_writeback(src)) {
|
2011-03-23 07:33:11 +08:00
|
|
|
/*
|
2013-04-30 06:07:58 +08:00
|
|
|
* Only in the case of a full synchronous migration is it
|
2012-01-13 09:19:43 +08:00
|
|
|
* necessary to wait for PageWriteback. In the async case,
|
|
|
|
* the retry loop is too short and in the sync-light case,
|
|
|
|
* the overhead of stalling is too much
|
2011-03-23 07:33:11 +08:00
|
|
|
*/
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
2011-03-23 07:33:11 +08:00
|
|
|
rc = -EBUSY;
|
2023-02-13 20:34:42 +08:00
|
|
|
goto out;
|
2011-03-23 07:33:11 +08:00
|
|
|
}
|
2022-09-03 03:46:46 +08:00
|
|
|
folio_wait_writeback(src);
|
2006-06-23 17:03:51 +08:00
|
|
|
}
|
2015-11-06 10:49:56 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
2022-09-03 03:46:46 +08:00
|
|
|
* By try_to_migrate(), src->mapcount goes down to 0 here. In this case,
|
|
|
|
* we cannot notice that anon_vma is freed while we migrate a page.
|
2011-01-14 07:47:30 +08:00
|
|
|
* This get_anon_vma() delays freeing anon_vma pointer until the end
|
2007-07-27 01:41:07 +08:00
|
|
|
* of migration. File cache pages are no problem because of page_lock()
|
2007-08-31 14:56:21 +08:00
|
|
|
* File Caches may use write_page() or lock_page() in migration, then,
|
|
|
|
* just care Anon page here.
|
2015-11-06 10:49:56 +08:00
|
|
|
*
|
2022-09-03 03:46:50 +08:00
|
|
|
* Only folio_get_anon_vma() understands the subtleties of
|
2015-11-06 10:49:56 +08:00
|
|
|
* getting a hold on an anon_vma from outside one of its mms.
|
|
|
|
* But if we cannot get anon_vma, then we won't need it anyway,
|
|
|
|
* because that implies that the anon page is no longer mapped
|
|
|
|
* (and cannot be remapped so long as we hold the page lock).
|
2007-07-27 01:41:07 +08:00
|
|
|
*/
|
2022-09-03 03:46:46 +08:00
|
|
|
if (folio_test_anon(src) && !folio_test_ksm(src))
|
2022-09-03 03:46:50 +08:00
|
|
|
anon_vma = folio_get_anon_vma(src);
|
2008-02-05 14:29:33 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
/*
|
|
|
|
* Block others from accessing the new page when we get around to
|
|
|
|
* establishing additional references. We are usually the only one
|
2022-09-03 03:46:46 +08:00
|
|
|
* holding a reference to dst at this point. We used to have a BUG
|
|
|
|
* here if folio_trylock(dst) fails, but would like to allow for
|
|
|
|
* cases where there might be a race with the previous use of dst.
|
2015-11-06 10:49:49 +08:00
|
|
|
* This is much like races on refcount of oldpage: just don't BUG().
|
|
|
|
*/
|
2022-09-03 03:46:46 +08:00
|
|
|
if (unlikely(!folio_trylock(dst)))
|
2023-02-13 20:34:42 +08:00
|
|
|
goto out;
|
|
|
|
dst_locked = true;
|
2015-11-06 10:49:49 +08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (unlikely(!is_lru)) {
|
2023-02-13 20:34:39 +08:00
|
|
|
__migrate_folio_record(dst, page_was_mapped, anon_vma);
|
|
|
|
return MIGRATEPAGE_UNMAP;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
2007-07-27 01:41:07 +08:00
|
|
|
/*
|
2008-02-05 14:29:33 +08:00
|
|
|
* Corner case handling:
|
|
|
|
* 1. When a new swap-cache page is read into, it is added to the LRU
|
|
|
|
* and treated as swapcache but it has no rmap yet.
|
2022-09-03 03:46:46 +08:00
|
|
|
* Calling try_to_unmap() against a src->mapping==NULL page will
|
2008-02-05 14:29:33 +08:00
|
|
|
* trigger a BUG. So handle it here.
|
2020-12-15 11:13:02 +08:00
|
|
|
* 2. An orphaned page (see truncate_cleanup_page) might have
|
2008-02-05 14:29:33 +08:00
|
|
|
* fs-private metadata. The page can be picked up due to memory
|
|
|
|
* offlining. Everywhere else except page reclaim, the page is
|
|
|
|
* invisible to the vm, so the page can not be migrated. So try to
|
|
|
|
* free the metadata, so the page can be freed.
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
2022-09-03 03:46:46 +08:00
|
|
|
if (!src->mapping) {
|
|
|
|
if (folio_test_private(src)) {
|
|
|
|
try_to_free_buffers(src);
|
2023-02-13 20:34:42 +08:00
|
|
|
goto out;
|
2008-02-05 14:29:33 +08:00
|
|
|
}
|
2022-09-03 03:46:46 +08:00
|
|
|
} else if (folio_mapped(src)) {
|
2015-11-06 10:49:49 +08:00
|
|
|
/* Establish migration ptes */
|
2022-09-03 03:46:46 +08:00
|
|
|
VM_BUG_ON_FOLIO(folio_test_anon(src) &&
|
|
|
|
!folio_test_ksm(src) && !anon_vma, src);
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
try_to_migrate(src, mode == MIGRATE_ASYNC ? TTU_BATCH_FLUSH : 0);
|
2023-02-13 20:34:39 +08:00
|
|
|
page_was_mapped = 1;
|
2014-12-13 08:56:19 +08:00
|
|
|
}
|
2007-07-27 01:41:07 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
if (!folio_mapped(src)) {
|
|
|
|
__migrate_folio_record(dst, page_was_mapped, anon_vma);
|
|
|
|
return MIGRATEPAGE_UNMAP;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
2023-02-13 20:34:41 +08:00
|
|
|
/*
|
|
|
|
* A folio that has not been unmapped will be restored to
|
|
|
|
* right list unless we want to retry.
|
|
|
|
*/
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
if (rc == -EAGAIN)
|
2023-02-13 20:34:42 +08:00
|
|
|
ret = NULL;
|
2023-02-13 20:34:41 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
migrate_folio_undo_src(src, page_was_mapped, anon_vma, locked, ret);
|
|
|
|
migrate_folio_undo_dst(dst, dst_locked, put_new_page, private);
|
2023-02-13 20:34:41 +08:00
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
/* Migrate the folio to the newly allocated folio in dst. */
|
|
|
|
static int migrate_folio_move(free_page_t put_new_page, unsigned long private,
|
|
|
|
struct folio *src, struct folio *dst,
|
|
|
|
enum migrate_mode mode, enum migrate_reason reason,
|
|
|
|
struct list_head *ret)
|
2023-02-13 20:34:39 +08:00
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
int page_was_mapped = 0;
|
|
|
|
struct anon_vma *anon_vma = NULL;
|
|
|
|
bool is_lru = !__PageMovable(&src->page);
|
2023-02-13 20:34:40 +08:00
|
|
|
struct list_head *prev;
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
__migrate_folio_extract(dst, &page_was_mapped, &anon_vma);
|
2023-02-13 20:34:40 +08:00
|
|
|
prev = dst->lru.prev;
|
|
|
|
list_del(&dst->lru);
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
rc = move_to_new_folio(dst, src, mode);
|
2023-02-13 20:34:42 +08:00
|
|
|
if (rc)
|
|
|
|
goto out;
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
if (unlikely(!is_lru))
|
|
|
|
goto out_unlock_both;
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2022-02-15 10:33:17 +08:00
|
|
|
/*
|
2022-09-03 03:46:46 +08:00
|
|
|
* When successful, push dst to LRU immediately: so that if it
|
2022-02-15 10:33:17 +08:00
|
|
|
* turns out to be an mlocked page, remove_migration_ptes() will
|
2022-09-03 03:46:46 +08:00
|
|
|
* automatically build up the correct dst->mlock_count for it.
|
2022-02-15 10:33:17 +08:00
|
|
|
*
|
|
|
|
* We would like to do something similar for the old page, when
|
|
|
|
* unsuccessful, and other cases when a page has been temporarily
|
|
|
|
* isolated from the unevictable LRU: but this case is the easiest.
|
|
|
|
*/
|
2023-02-13 20:34:42 +08:00
|
|
|
folio_add_lru(dst);
|
|
|
|
if (page_was_mapped)
|
|
|
|
lru_add_drain();
|
2022-02-15 10:33:17 +08:00
|
|
|
|
2015-11-06 10:49:53 +08:00
|
|
|
if (page_was_mapped)
|
2023-02-13 20:34:42 +08:00
|
|
|
remove_migration_ptes(src, dst, false);
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:17 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
out_unlock_both:
|
2022-09-03 03:46:46 +08:00
|
|
|
folio_unlock(dst);
|
2023-02-13 20:34:42 +08:00
|
|
|
set_page_owner_migrate_reason(&dst->page, reason);
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
/*
|
2022-09-03 03:46:46 +08:00
|
|
|
* If migration is successful, decrease refcount of dst,
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
* which will not free the page because new page owner increased
|
2022-02-15 10:33:17 +08:00
|
|
|
* refcounter.
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
*/
|
2023-02-13 20:34:42 +08:00
|
|
|
folio_put(dst);
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
2023-02-13 20:34:42 +08:00
|
|
|
* A folio that has been migrated has all references removed
|
|
|
|
* and will be freed.
|
2020-12-15 11:13:06 +08:00
|
|
|
*/
|
2023-02-13 20:34:42 +08:00
|
|
|
list_del(&src->lru);
|
|
|
|
/* Drop an anon_vma reference if we took one */
|
|
|
|
if (anon_vma)
|
|
|
|
put_anon_vma(anon_vma);
|
|
|
|
folio_unlock(src);
|
|
|
|
migrate_folio_done(src, reason);
|
2012-12-12 08:02:42 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
return rc;
|
2011-11-01 08:06:57 +08:00
|
|
|
out:
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
2023-02-13 20:34:42 +08:00
|
|
|
* A folio that has not been migrated will be restored to
|
|
|
|
* right list unless we want to retry.
|
2020-12-15 11:13:06 +08:00
|
|
|
*/
|
2023-02-13 20:34:42 +08:00
|
|
|
if (rc == -EAGAIN) {
|
|
|
|
list_add(&dst->lru, prev);
|
|
|
|
__migrate_folio_record(dst, page_was_mapped, anon_vma);
|
|
|
|
return rc;
|
2006-06-23 17:03:51 +08:00
|
|
|
}
|
2014-06-05 07:08:25 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
migrate_folio_undo_src(src, page_was_mapped, anon_vma, true, ret);
|
|
|
|
migrate_folio_undo_dst(dst, true, put_new_page, private);
|
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
/*
|
|
|
|
* Counterpart of unmap_and_move_page() for hugepage migration.
|
|
|
|
*
|
|
|
|
* This function doesn't wait the completion of hugepage I/O
|
|
|
|
* because there is no race between I/O and migration for hugepage.
|
|
|
|
* Note that currently hugepage I/O occurs only in direct I/O
|
|
|
|
* where no lock is held and PG_writeback is irrelevant,
|
|
|
|
* and writeback status of all subpages are counted in the reference
|
|
|
|
* count of the head page (i.e. if all subpages of a 2MB hugepage are
|
|
|
|
* under direct I/O, the reference of the head page is 512 and a bit more.)
|
|
|
|
* This means that when we try to migrate hugepage whose subpages are
|
|
|
|
* doing direct I/O, some references remain after try_to_unmap() and
|
|
|
|
* hugepage migration fails without data corruption.
|
|
|
|
*
|
|
|
|
* There is also no race when direct I/O is issued on the page under migration,
|
|
|
|
* because then pte is replaced with migration swap entry and direct I/O code
|
|
|
|
* will wait in the page fault for migration to complete.
|
|
|
|
*/
|
|
|
|
static int unmap_and_move_huge_page(new_page_t get_new_page,
|
2014-06-05 07:08:25 +08:00
|
|
|
free_page_t put_new_page, unsigned long private,
|
|
|
|
struct page *hpage, int force,
|
2020-12-15 11:13:06 +08:00
|
|
|
enum migrate_mode mode, int reason,
|
|
|
|
struct list_head *ret)
|
2010-09-08 09:19:35 +08:00
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
struct folio *dst, *src = page_folio(hpage);
|
2015-11-06 10:49:46 +08:00
|
|
|
int rc = -EAGAIN;
|
2014-12-13 08:56:19 +08:00
|
|
|
int page_was_mapped = 0;
|
2014-01-22 07:51:15 +08:00
|
|
|
struct page *new_hpage;
|
2010-09-08 09:19:35 +08:00
|
|
|
struct anon_vma *anon_vma = NULL;
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
struct address_space *mapping = NULL;
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (folio_ref_count(src) == 1) {
|
2021-02-05 10:32:17 +08:00
|
|
|
/* page was freed from under us. So we are done. */
|
2023-01-26 01:05:32 +08:00
|
|
|
folio_putback_active_hugetlb(src);
|
2021-02-05 10:32:17 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2018-04-11 07:30:03 +08:00
|
|
|
new_hpage = get_new_page(hpage, private);
|
2010-09-08 09:19:35 +08:00
|
|
|
if (!new_hpage)
|
|
|
|
return -ENOMEM;
|
2022-01-29 12:32:59 +08:00
|
|
|
dst = page_folio(new_hpage);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (!folio_trylock(src)) {
|
2017-09-09 07:12:06 +08:00
|
|
|
if (!force)
|
2010-09-08 09:19:35 +08:00
|
|
|
goto out;
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto out;
|
|
|
|
}
|
2022-09-03 03:46:47 +08:00
|
|
|
folio_lock(src);
|
2010-09-08 09:19:35 +08:00
|
|
|
}
|
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
/*
|
|
|
|
* Check for pages which are in the process of being freed. Without
|
2022-09-03 03:46:47 +08:00
|
|
|
* folio_mapping() set, hugetlbfs specific move page routine will not
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
* be called and we could leak usage counts for subpools.
|
|
|
|
*/
|
2022-11-02 06:30:59 +08:00
|
|
|
if (hugetlb_folio_subpool(src) && !folio_mapping(src)) {
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
rc = -EBUSY;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (folio_test_anon(src))
|
2022-09-03 03:46:50 +08:00
|
|
|
anon_vma = folio_get_anon_vma(src);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (unlikely(!folio_trylock(dst)))
|
2015-11-06 10:49:49 +08:00
|
|
|
goto put_anon;
|
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (folio_mapped(src)) {
|
2021-07-01 09:54:16 +08:00
|
|
|
enum ttu_flags ttu = 0;
|
2020-11-14 14:52:16 +08:00
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (!folio_test_anon(src)) {
|
2020-11-14 14:52:16 +08:00
|
|
|
/*
|
|
|
|
* In shared mappings, try_to_unmap could potentially
|
|
|
|
* call huge_pmd_unshare. Because of this, take
|
|
|
|
* semaphore in write mode here and set TTU_RMAP_LOCKED
|
|
|
|
* to let lower levels know we have taken the lock.
|
|
|
|
*/
|
|
|
|
mapping = hugetlb_page_mapping_lock_write(hpage);
|
|
|
|
if (unlikely(!mapping))
|
|
|
|
goto unlock_put_anon;
|
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
ttu = TTU_RMAP_LOCKED;
|
2020-11-14 14:52:16 +08:00
|
|
|
}
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
|
2022-01-29 03:29:43 +08:00
|
|
|
try_to_migrate(src, ttu);
|
2014-12-13 08:56:19 +08:00
|
|
|
page_was_mapped = 1;
|
2020-11-14 14:52:16 +08:00
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
if (ttu & TTU_RMAP_LOCKED)
|
2020-11-14 14:52:16 +08:00
|
|
|
i_mmap_unlock_write(mapping);
|
2014-12-13 08:56:19 +08:00
|
|
|
}
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2022-09-03 03:46:47 +08:00
|
|
|
if (!folio_mapped(src))
|
2022-05-13 11:23:05 +08:00
|
|
|
rc = move_to_new_folio(dst, src, mode);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2020-11-14 14:52:16 +08:00
|
|
|
if (page_was_mapped)
|
2022-01-29 12:32:59 +08:00
|
|
|
remove_migration_ptes(src,
|
|
|
|
rc == MIGRATEPAGE_SUCCESS ? dst : src, false);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
unlock_put_anon:
|
2022-09-03 03:46:47 +08:00
|
|
|
folio_unlock(dst);
|
2015-11-06 10:49:49 +08:00
|
|
|
|
|
|
|
put_anon:
|
2011-01-14 07:47:31 +08:00
|
|
|
if (anon_vma)
|
2011-03-23 07:32:46 +08:00
|
|
|
put_anon_vma(anon_vma);
|
2012-08-01 07:42:27 +08:00
|
|
|
|
2015-11-06 10:49:46 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
2022-11-02 06:30:59 +08:00
|
|
|
move_hugetlb_state(src, dst, reason);
|
2015-11-06 10:49:46 +08:00
|
|
|
put_new_page = NULL;
|
|
|
|
}
|
2012-08-01 07:42:27 +08:00
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
out_unlock:
|
2022-09-03 03:46:47 +08:00
|
|
|
folio_unlock(src);
|
2011-12-09 06:34:20 +08:00
|
|
|
out:
|
2020-12-15 11:13:06 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS)
|
2023-01-26 01:05:32 +08:00
|
|
|
folio_putback_active_hugetlb(src);
|
2021-05-05 09:37:07 +08:00
|
|
|
else if (rc != -EAGAIN)
|
2022-09-03 03:46:47 +08:00
|
|
|
list_move_tail(&src->lru, ret);
|
2014-06-05 07:08:25 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If migration was not successful and there's a freeing callback, use
|
|
|
|
* it. Otherwise, put_page() will drop the reference grabbed during
|
|
|
|
* isolation.
|
|
|
|
*/
|
2015-11-06 10:49:46 +08:00
|
|
|
if (put_new_page)
|
2014-06-05 07:08:25 +08:00
|
|
|
put_new_page(new_hpage, private);
|
|
|
|
else
|
2023-01-26 01:05:32 +08:00
|
|
|
folio_putback_active_hugetlb(dst);
|
2014-06-05 07:08:25 +08:00
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
static inline int try_split_folio(struct folio *folio, struct list_head *split_folios)
|
2020-12-15 11:13:16 +08:00
|
|
|
{
|
2022-08-17 16:14:02 +08:00
|
|
|
int rc;
|
2020-12-15 11:13:16 +08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
folio_lock(folio);
|
|
|
|
rc = split_folio_to_list(folio, split_folios);
|
|
|
|
folio_unlock(folio);
|
2022-08-17 16:14:06 +08:00
|
|
|
if (!rc)
|
2022-11-09 09:23:48 +08:00
|
|
|
list_move_tail(&folio->lru, split_folios);
|
2020-12-15 11:13:16 +08:00
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
#define NR_MAX_BATCHED_MIGRATION HPAGE_PMD_NR
|
|
|
|
#else
|
|
|
|
#define NR_MAX_BATCHED_MIGRATION 512
|
|
|
|
#endif
|
2023-02-13 20:34:37 +08:00
|
|
|
#define NR_MAX_MIGRATE_PAGES_RETRY 10
|
2023-03-03 11:01:55 +08:00
|
|
|
#define NR_MAX_MIGRATE_ASYNC_RETRY 3
|
|
|
|
#define NR_MAX_MIGRATE_SYNC_RETRY \
|
|
|
|
(NR_MAX_MIGRATE_PAGES_RETRY - NR_MAX_MIGRATE_ASYNC_RETRY)
|
2023-02-13 20:34:37 +08:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
struct migrate_pages_stats {
|
|
|
|
int nr_succeeded; /* Normal and large folios migrated successfully, in
|
|
|
|
units of base pages */
|
|
|
|
int nr_failed_pages; /* Normal and large folios failed to be migrated, in
|
|
|
|
units of base pages. Untried folios aren't counted */
|
|
|
|
int nr_thp_succeeded; /* THP migrated successfully */
|
|
|
|
int nr_thp_failed; /* THP failed to be migrated */
|
|
|
|
int nr_thp_split; /* THP split before migrating */
|
|
|
|
};
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2023-02-13 20:34:37 +08:00
|
|
|
* Returns the number of hugetlb folios that were not migrated, or an error code
|
|
|
|
* after NR_MAX_MIGRATE_PAGES_RETRY attempts or if no hugetlb folios are movable
|
|
|
|
* any more because the list has become empty or no retryable hugetlb folios
|
|
|
|
* exist any more. It is caller's responsibility to call putback_movable_pages()
|
|
|
|
* only if ret != 0.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2023-02-13 20:34:37 +08:00
|
|
|
static int migrate_hugetlbs(struct list_head *from, new_page_t get_new_page,
|
|
|
|
free_page_t put_new_page, unsigned long private,
|
|
|
|
enum migrate_mode mode, int reason,
|
|
|
|
struct migrate_pages_stats *stats,
|
|
|
|
struct list_head *ret_folios)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2006-06-23 17:03:51 +08:00
|
|
|
int retry = 1;
|
2023-02-13 20:34:37 +08:00
|
|
|
int nr_failed = 0;
|
|
|
|
int nr_retry_pages = 0;
|
|
|
|
int pass = 0;
|
|
|
|
struct folio *folio, *folio2;
|
|
|
|
int rc, nr_pages;
|
|
|
|
|
|
|
|
for (pass = 0; pass < NR_MAX_MIGRATE_PAGES_RETRY && retry; pass++) {
|
|
|
|
retry = 0;
|
|
|
|
nr_retry_pages = 0;
|
|
|
|
|
|
|
|
list_for_each_entry_safe(folio, folio2, from, lru) {
|
|
|
|
if (!folio_test_hugetlb(folio))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
nr_pages = folio_nr_pages(folio);
|
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
/*
|
|
|
|
* Migratability of hugepages depends on architectures and
|
|
|
|
* their size. This check is necessary because some callers
|
|
|
|
* of hugepage migration like soft offline and memory
|
|
|
|
* hotremove don't walk through page tables or check whether
|
|
|
|
* the hugepage is pmd-based or not before kicking migration.
|
|
|
|
*/
|
|
|
|
if (!hugepage_migration_supported(folio_hstate(folio))) {
|
|
|
|
nr_failed++;
|
|
|
|
stats->nr_failed_pages += nr_pages;
|
|
|
|
list_move_tail(&folio->lru, ret_folios);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
rc = unmap_and_move_huge_page(get_new_page,
|
|
|
|
put_new_page, private,
|
|
|
|
&folio->page, pass > 2, mode,
|
|
|
|
reason, ret_folios);
|
|
|
|
/*
|
|
|
|
* The rules are:
|
|
|
|
* Success: hugetlb folio will be put back
|
|
|
|
* -EAGAIN: stay on the from list
|
|
|
|
* -ENOMEM: stay on the from list
|
|
|
|
* Other errno: put on ret_folios list
|
|
|
|
*/
|
|
|
|
switch(rc) {
|
|
|
|
case -ENOMEM:
|
|
|
|
/*
|
|
|
|
* When memory is low, don't bother to try to migrate
|
|
|
|
* other folios, just exit.
|
|
|
|
*/
|
|
|
|
stats->nr_failed_pages += nr_pages + nr_retry_pages;
|
|
|
|
return -ENOMEM;
|
|
|
|
case -EAGAIN:
|
|
|
|
retry++;
|
|
|
|
nr_retry_pages += nr_pages;
|
|
|
|
break;
|
|
|
|
case MIGRATEPAGE_SUCCESS:
|
|
|
|
stats->nr_succeeded += nr_pages;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/*
|
|
|
|
* Permanent failure (-EBUSY, etc.):
|
|
|
|
* unlike -EAGAIN case, the failed folio is
|
|
|
|
* removed from migration folio list and not
|
|
|
|
* retried in the next outer loop.
|
|
|
|
*/
|
|
|
|
nr_failed++;
|
|
|
|
stats->nr_failed_pages += nr_pages;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* nr_failed is number of hugetlb folios failed to be migrated. After
|
|
|
|
* NR_MAX_MIGRATE_PAGES_RETRY attempts, give up and count retried hugetlb
|
|
|
|
* folios as failed.
|
|
|
|
*/
|
|
|
|
nr_failed += retry;
|
|
|
|
stats->nr_failed_pages += nr_retry_pages;
|
|
|
|
|
|
|
|
return nr_failed;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
/*
|
|
|
|
* migrate_pages_batch() first unmaps folios in the from list as many as
|
|
|
|
* possible, then move the unmapped folios.
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
*
|
|
|
|
* We only batch migration if mode == MIGRATE_ASYNC to avoid to wait a
|
|
|
|
* lock or bit when we have locked more than one folio. Which may cause
|
|
|
|
* deadlock (e.g., for loop device). So, if mode != MIGRATE_ASYNC, the
|
|
|
|
* length of the from list must be <= 1.
|
2023-02-13 20:34:40 +08:00
|
|
|
*/
|
2023-02-13 20:34:38 +08:00
|
|
|
static int migrate_pages_batch(struct list_head *from, new_page_t get_new_page,
|
2014-06-05 07:08:25 +08:00
|
|
|
free_page_t put_new_page, unsigned long private,
|
2023-02-13 20:34:38 +08:00
|
|
|
enum migrate_mode mode, int reason, struct list_head *ret_folios,
|
2023-03-03 11:01:54 +08:00
|
|
|
struct list_head *split_folios, struct migrate_pages_stats *stats,
|
|
|
|
int nr_pass)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2023-03-03 11:01:54 +08:00
|
|
|
int retry = 1;
|
2022-11-09 09:23:48 +08:00
|
|
|
int large_retry = 1;
|
2020-08-12 09:31:51 +08:00
|
|
|
int thp_retry = 1;
|
2006-03-22 16:09:12 +08:00
|
|
|
int nr_failed = 0;
|
2022-08-17 16:14:07 +08:00
|
|
|
int nr_retry_pages = 0;
|
2022-11-09 09:23:48 +08:00
|
|
|
int nr_large_failed = 0;
|
2006-03-22 16:09:12 +08:00
|
|
|
int pass = 0;
|
2022-11-09 09:23:48 +08:00
|
|
|
bool is_large = false;
|
2020-08-12 09:31:51 +08:00
|
|
|
bool is_thp = false;
|
2023-02-13 20:34:40 +08:00
|
|
|
struct folio *folio, *folio2, *dst = NULL, *dst2;
|
2023-03-03 11:01:54 +08:00
|
|
|
int rc, rc_saved = 0, nr_pages;
|
2023-02-13 20:34:40 +08:00
|
|
|
LIST_HEAD(unmap_folios);
|
|
|
|
LIST_HEAD(dst_folios);
|
2021-07-01 09:51:48 +08:00
|
|
|
bool nosplit = (reason == MR_NUMA_MISPLACED);
|
2023-02-13 20:34:37 +08:00
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
VM_WARN_ON_ONCE(mode != MIGRATE_ASYNC &&
|
|
|
|
!list_empty(from) && !list_is_singular(from));
|
2023-03-03 11:01:54 +08:00
|
|
|
|
|
|
|
for (pass = 0; pass < nr_pass && (retry || large_retry); pass++) {
|
2006-06-23 17:03:51 +08:00
|
|
|
retry = 0;
|
2022-11-09 09:23:48 +08:00
|
|
|
large_retry = 0;
|
2020-08-12 09:31:51 +08:00
|
|
|
thp_retry = 0;
|
2022-08-17 16:14:07 +08:00
|
|
|
nr_retry_pages = 0;
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
list_for_each_entry_safe(folio, folio2, from, lru) {
|
2020-08-12 09:31:51 +08:00
|
|
|
/*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Large folio statistics is based on the source large
|
|
|
|
* folio. Capture required information that might get
|
|
|
|
* lost during migration.
|
2020-08-12 09:31:51 +08:00
|
|
|
*/
|
2023-02-13 20:34:37 +08:00
|
|
|
is_large = folio_test_large(folio);
|
2022-11-09 09:23:48 +08:00
|
|
|
is_thp = is_large && folio_test_pmd_mappable(folio);
|
|
|
|
nr_pages = folio_nr_pages(folio);
|
2023-02-13 20:34:37 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
cond_resched();
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2020-12-15 11:13:16 +08:00
|
|
|
/*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Large folio migration might be unsupported or
|
2023-02-13 20:34:44 +08:00
|
|
|
* the allocation might be failed so we should retry
|
2022-11-09 09:23:48 +08:00
|
|
|
* on the same folio with the large folio split
|
|
|
|
* to normal folios.
|
2020-12-15 11:13:16 +08:00
|
|
|
*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Split folios are put in split_folios, and
|
2022-08-17 16:14:06 +08:00
|
|
|
* we will migrate them after the rest of the
|
|
|
|
* list is processed.
|
2020-12-15 11:13:16 +08:00
|
|
|
*/
|
2023-02-13 20:34:44 +08:00
|
|
|
if (!thp_migration_supported() && is_thp) {
|
|
|
|
nr_large_failed++;
|
|
|
|
stats->nr_thp_failed++;
|
2023-03-03 11:01:54 +08:00
|
|
|
if (!try_split_folio(folio, split_folios)) {
|
2023-02-13 20:34:44 +08:00
|
|
|
stats->nr_thp_split++;
|
|
|
|
continue;
|
2022-04-29 14:16:08 +08:00
|
|
|
}
|
2023-02-13 20:34:44 +08:00
|
|
|
stats->nr_failed_pages += nr_pages;
|
|
|
|
list_move_tail(&folio->lru, ret_folios);
|
|
|
|
continue;
|
|
|
|
}
|
2022-04-29 14:16:08 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
rc = migrate_folio_unmap(get_new_page, put_new_page, private,
|
2023-03-03 11:01:55 +08:00
|
|
|
folio, &dst, mode, reason, ret_folios);
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
|
|
|
* The rules are:
|
2023-02-13 20:34:37 +08:00
|
|
|
* Success: folio will be freed
|
2023-02-13 20:34:40 +08:00
|
|
|
* Unmap: folio will be put on unmap_folios list,
|
|
|
|
* dst folio put on dst_folios list
|
2020-12-15 11:13:06 +08:00
|
|
|
* -EAGAIN: stay on the from list
|
|
|
|
* -ENOMEM: stay on the from list
|
2023-02-13 20:34:38 +08:00
|
|
|
* Other errno: put on ret_folios list
|
2020-12-15 11:13:06 +08:00
|
|
|
*/
|
2006-06-23 17:03:51 +08:00
|
|
|
switch(rc) {
|
2006-06-23 17:03:53 +08:00
|
|
|
case -ENOMEM:
|
2018-04-11 07:30:07 +08:00
|
|
|
/*
|
2020-12-15 11:13:16 +08:00
|
|
|
* When memory is low, don't bother to try to migrate
|
2023-02-13 20:34:40 +08:00
|
|
|
* other folios, move unmapped folios, then exit.
|
2018-04-11 07:30:07 +08:00
|
|
|
*/
|
2022-11-09 09:23:48 +08:00
|
|
|
if (is_large) {
|
|
|
|
nr_large_failed++;
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_thp_failed += is_thp;
|
2022-11-09 09:23:48 +08:00
|
|
|
/* Large folio NUMA faulting doesn't split to retry. */
|
mm: migrate: try again if THP split is failed due to page refcnt
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 16:34:22 +08:00
|
|
|
if (!nosplit) {
|
2023-03-03 11:01:54 +08:00
|
|
|
int ret = try_split_folio(folio, split_folios);
|
mm: migrate: try again if THP split is failed due to page refcnt
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 16:34:22 +08:00
|
|
|
|
|
|
|
if (!ret) {
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_thp_split += is_thp;
|
mm: migrate: try again if THP split is failed due to page refcnt
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 16:34:22 +08:00
|
|
|
break;
|
|
|
|
} else if (reason == MR_LONGTERM_PIN &&
|
|
|
|
ret == -EAGAIN) {
|
|
|
|
/*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Try again to split large folio to
|
|
|
|
* mitigate the failure of longterm pinning.
|
mm: migrate: try again if THP split is failed due to page refcnt
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 16:34:22 +08:00
|
|
|
*/
|
2022-11-09 09:23:48 +08:00
|
|
|
large_retry++;
|
|
|
|
thp_retry += is_thp;
|
|
|
|
nr_retry_pages += nr_pages;
|
2023-04-17 07:59:29 +08:00
|
|
|
/* Undo duplicated failure counting. */
|
|
|
|
nr_large_failed--;
|
|
|
|
stats->nr_thp_failed -= is_thp;
|
mm: migrate: try again if THP split is failed due to page refcnt
When creating a virtual machine, we will use memfd_create() to get a file
descriptor which can be used to create share memory mappings using the
mmap function, meanwhile the mmap() will set the MAP_POPULATE flag to
allocate physical pages for the virtual machine.
When allocating physical pages for the guest, the host can fallback to
allocate some CMA pages for the guest when over half of the zone's free
memory is in the CMA area.
In guest os, when the application wants to do some data transaction with
DMA, our QEMU will call VFIO_IOMMU_MAP_DMA ioctl to do longterm-pin and
create IOMMU mappings for the DMA pages. However, when calling
VFIO_IOMMU_MAP_DMA ioctl to pin the physical pages, we found it will be
failed to longterm-pin sometimes.
After some invetigation, we found the pages used to do DMA mapping can
contain some CMA pages, and these CMA pages will cause a possible failure
of the longterm-pin, due to failed to migrate the CMA pages. The reason
of migration failure may be temporary reference count or memory allocation
failure. So that will cause the VFIO_IOMMU_MAP_DMA ioctl returns error,
which makes the application failed to start.
I observed one migration failure case (which is not easy to reproduce) is
that, the 'thp_migration_fail' count is 1 and the 'thp_split_page_failed'
count is also 1.
That means when migrating a THP which is in CMA area, but can not allocate
a new THP due to memory fragmentation, so it will split the THP. However
THP split is also failed, probably the reason is temporary reference count
of this THP. And the temporary reference count can be caused by dropping
page caches (I observed the drop caches operation in the system), but we
can not drop the shmem page caches due to they are already dirty at that
time.
Especially for THP split failure, which is caused by temporary reference
count, we can try again to mitigate the failure of migration in this case
according to previous discussion [1].
[1] https://lore.kernel.org/all/470dc638-a300-f261-94b4-e27250e42f96@redhat.com/
Link: https://lkml.kernel.org/r/6784730480a1df82e8f4cba1ed088e4ac767994b.1666599848.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-24 16:34:22 +08:00
|
|
|
break;
|
|
|
|
}
|
2018-04-11 07:30:07 +08:00
|
|
|
}
|
2023-03-03 11:01:54 +08:00
|
|
|
} else {
|
2022-04-29 14:16:08 +08:00
|
|
|
nr_failed++;
|
2020-08-12 09:31:51 +08:00
|
|
|
}
|
2022-01-15 06:08:34 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_failed_pages += nr_pages + nr_retry_pages;
|
2022-08-17 16:14:03 +08:00
|
|
|
/* nr_failed isn't updated for not used */
|
2022-11-09 09:23:48 +08:00
|
|
|
nr_large_failed += large_retry;
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_thp_failed += thp_retry;
|
2023-02-13 20:34:40 +08:00
|
|
|
rc_saved = rc;
|
|
|
|
if (list_empty(&unmap_folios))
|
|
|
|
goto out;
|
|
|
|
else
|
|
|
|
goto move;
|
2006-06-23 17:03:51 +08:00
|
|
|
case -EAGAIN:
|
2022-11-09 09:23:48 +08:00
|
|
|
if (is_large) {
|
|
|
|
large_retry++;
|
|
|
|
thp_retry += is_thp;
|
2023-03-03 11:01:54 +08:00
|
|
|
} else {
|
2022-04-29 14:16:08 +08:00
|
|
|
retry++;
|
2022-11-09 09:23:48 +08:00
|
|
|
}
|
|
|
|
nr_retry_pages += nr_pages;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2012-12-12 08:02:31 +08:00
|
|
|
case MIGRATEPAGE_SUCCESS:
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_succeeded += nr_pages;
|
|
|
|
stats->nr_thp_succeeded += is_thp;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2023-02-13 20:34:40 +08:00
|
|
|
case MIGRATEPAGE_UNMAP:
|
|
|
|
list_move_tail(&folio->lru, &unmap_folios);
|
|
|
|
list_add_tail(&dst->lru, &dst_folios);
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
|
|
|
default:
|
2014-01-22 07:51:14 +08:00
|
|
|
/*
|
2020-12-15 11:13:16 +08:00
|
|
|
* Permanent failure (-EBUSY, etc.):
|
2022-11-09 09:23:48 +08:00
|
|
|
* unlike -EAGAIN case, the failed folio is
|
|
|
|
* removed from migration folio list and not
|
2014-01-22 07:51:14 +08:00
|
|
|
* retried in the next outer loop.
|
|
|
|
*/
|
2022-11-09 09:23:48 +08:00
|
|
|
if (is_large) {
|
|
|
|
nr_large_failed++;
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_thp_failed += is_thp;
|
2023-03-03 11:01:54 +08:00
|
|
|
} else {
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed++;
|
2022-11-09 09:23:48 +08:00
|
|
|
}
|
2022-04-29 14:16:08 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_failed_pages += nr_pages;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2006-06-23 17:03:33 +08:00
|
|
|
}
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
}
|
2022-08-17 16:14:08 +08:00
|
|
|
nr_failed += retry;
|
2022-11-09 09:23:48 +08:00
|
|
|
nr_large_failed += large_retry;
|
2023-02-13 20:34:38 +08:00
|
|
|
stats->nr_thp_failed += thp_retry;
|
|
|
|
stats->nr_failed_pages += nr_retry_pages;
|
2023-02-13 20:34:40 +08:00
|
|
|
move:
|
2023-02-13 20:34:43 +08:00
|
|
|
/* Flush TLBs for all unmapped folios */
|
|
|
|
try_to_unmap_flush();
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
retry = 1;
|
2023-03-03 11:01:54 +08:00
|
|
|
for (pass = 0; pass < nr_pass && (retry || large_retry); pass++) {
|
2023-02-13 20:34:40 +08:00
|
|
|
retry = 0;
|
|
|
|
large_retry = 0;
|
|
|
|
thp_retry = 0;
|
|
|
|
nr_retry_pages = 0;
|
|
|
|
|
|
|
|
dst = list_first_entry(&dst_folios, struct folio, lru);
|
|
|
|
dst2 = list_next_entry(dst, lru);
|
|
|
|
list_for_each_entry_safe(folio, folio2, &unmap_folios, lru) {
|
|
|
|
is_large = folio_test_large(folio);
|
|
|
|
is_thp = is_large && folio_test_pmd_mappable(folio);
|
|
|
|
nr_pages = folio_nr_pages(folio);
|
|
|
|
|
|
|
|
cond_resched();
|
|
|
|
|
|
|
|
rc = migrate_folio_move(put_new_page, private,
|
|
|
|
folio, dst, mode,
|
|
|
|
reason, ret_folios);
|
|
|
|
/*
|
|
|
|
* The rules are:
|
|
|
|
* Success: folio will be freed
|
|
|
|
* -EAGAIN: stay on the unmap_folios list
|
|
|
|
* Other errno: put on ret_folios list
|
|
|
|
*/
|
|
|
|
switch(rc) {
|
|
|
|
case -EAGAIN:
|
|
|
|
if (is_large) {
|
|
|
|
large_retry++;
|
|
|
|
thp_retry += is_thp;
|
2023-03-03 11:01:54 +08:00
|
|
|
} else {
|
2023-02-13 20:34:40 +08:00
|
|
|
retry++;
|
|
|
|
}
|
|
|
|
nr_retry_pages += nr_pages;
|
|
|
|
break;
|
|
|
|
case MIGRATEPAGE_SUCCESS:
|
|
|
|
stats->nr_succeeded += nr_pages;
|
|
|
|
stats->nr_thp_succeeded += is_thp;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
if (is_large) {
|
|
|
|
nr_large_failed++;
|
|
|
|
stats->nr_thp_failed += is_thp;
|
2023-03-03 11:01:54 +08:00
|
|
|
} else {
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed++;
|
2022-11-09 09:23:48 +08:00
|
|
|
}
|
2022-04-29 14:16:08 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
stats->nr_failed_pages += nr_pages;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2006-06-23 17:03:33 +08:00
|
|
|
}
|
2023-02-13 20:34:40 +08:00
|
|
|
dst = dst2;
|
|
|
|
dst2 = list_next_entry(dst, lru);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
}
|
2022-08-17 16:14:08 +08:00
|
|
|
nr_failed += retry;
|
2022-11-09 09:23:48 +08:00
|
|
|
nr_large_failed += large_retry;
|
2023-02-13 20:34:40 +08:00
|
|
|
stats->nr_thp_failed += thp_retry;
|
|
|
|
stats->nr_failed_pages += nr_retry_pages;
|
|
|
|
|
|
|
|
if (rc_saved)
|
|
|
|
rc = rc_saved;
|
|
|
|
else
|
|
|
|
rc = nr_failed + nr_large_failed;
|
|
|
|
out:
|
|
|
|
/* Cleanup remaining folios */
|
|
|
|
dst = list_first_entry(&dst_folios, struct folio, lru);
|
|
|
|
dst2 = list_next_entry(dst, lru);
|
|
|
|
list_for_each_entry_safe(folio, folio2, &unmap_folios, lru) {
|
|
|
|
int page_was_mapped = 0;
|
|
|
|
struct anon_vma *anon_vma = NULL;
|
|
|
|
|
|
|
|
__migrate_folio_extract(dst, &page_was_mapped, &anon_vma);
|
|
|
|
migrate_folio_undo_src(folio, page_was_mapped, anon_vma,
|
2023-02-13 20:34:42 +08:00
|
|
|
true, ret_folios);
|
2023-02-13 20:34:40 +08:00
|
|
|
list_del(&dst->lru);
|
2023-02-13 20:34:42 +08:00
|
|
|
migrate_folio_undo_dst(dst, true, put_new_page, private);
|
2023-02-13 20:34:40 +08:00
|
|
|
dst = dst2;
|
|
|
|
dst2 = list_next_entry(dst, lru);
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
static int migrate_pages_sync(struct list_head *from, new_page_t get_new_page,
|
|
|
|
free_page_t put_new_page, unsigned long private,
|
|
|
|
enum migrate_mode mode, int reason, struct list_head *ret_folios,
|
|
|
|
struct list_head *split_folios, struct migrate_pages_stats *stats)
|
|
|
|
{
|
|
|
|
int rc, nr_failed = 0;
|
|
|
|
LIST_HEAD(folios);
|
|
|
|
struct migrate_pages_stats astats;
|
|
|
|
|
|
|
|
memset(&astats, 0, sizeof(astats));
|
|
|
|
/* Try to migrate in batch with MIGRATE_ASYNC mode firstly */
|
|
|
|
rc = migrate_pages_batch(from, get_new_page, put_new_page, private, MIGRATE_ASYNC,
|
|
|
|
reason, &folios, split_folios, &astats,
|
|
|
|
NR_MAX_MIGRATE_ASYNC_RETRY);
|
|
|
|
stats->nr_succeeded += astats.nr_succeeded;
|
|
|
|
stats->nr_thp_succeeded += astats.nr_thp_succeeded;
|
|
|
|
stats->nr_thp_split += astats.nr_thp_split;
|
|
|
|
if (rc < 0) {
|
|
|
|
stats->nr_failed_pages += astats.nr_failed_pages;
|
|
|
|
stats->nr_thp_failed += astats.nr_thp_failed;
|
|
|
|
list_splice_tail(&folios, ret_folios);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
stats->nr_thp_failed += astats.nr_thp_split;
|
|
|
|
nr_failed += astats.nr_thp_split;
|
|
|
|
/*
|
|
|
|
* Fall back to migrate all failed folios one by one synchronously. All
|
|
|
|
* failed folios except split THPs will be retried, so their failure
|
|
|
|
* isn't counted
|
|
|
|
*/
|
|
|
|
list_splice_tail_init(&folios, from);
|
|
|
|
while (!list_empty(from)) {
|
|
|
|
list_move(from->next, &folios);
|
|
|
|
rc = migrate_pages_batch(&folios, get_new_page, put_new_page,
|
|
|
|
private, mode, reason, ret_folios,
|
|
|
|
split_folios, stats, NR_MAX_MIGRATE_SYNC_RETRY);
|
|
|
|
list_splice_tail_init(&folios, ret_folios);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
nr_failed += rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
return nr_failed;
|
|
|
|
}
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
/*
|
|
|
|
* migrate_pages - migrate the folios specified in a list, to the free folios
|
|
|
|
* supplied as the target for the page migration
|
|
|
|
*
|
|
|
|
* @from: The list of folios to be migrated.
|
|
|
|
* @get_new_page: The function used to allocate free folios to be used
|
|
|
|
* as the target of the folio migration.
|
|
|
|
* @put_new_page: The function used to free target folios if migration
|
|
|
|
* fails, or NULL if no special handling is necessary.
|
|
|
|
* @private: Private data to be passed on to get_new_page()
|
|
|
|
* @mode: The migration mode that specifies the constraints for
|
|
|
|
* folio migration, if any.
|
|
|
|
* @reason: The reason for folio migration.
|
|
|
|
* @ret_succeeded: Set to the number of folios migrated successfully if
|
|
|
|
* the caller passes a non-NULL pointer.
|
|
|
|
*
|
|
|
|
* The function returns after NR_MAX_MIGRATE_PAGES_RETRY attempts or if no folios
|
|
|
|
* are movable any more because the list has become empty or no retryable folios
|
|
|
|
* exist any more. It is caller's responsibility to call putback_movable_pages()
|
|
|
|
* only if ret != 0.
|
|
|
|
*
|
|
|
|
* Returns the number of {normal folio, large folio, hugetlb} that were not
|
|
|
|
* migrated, or an error code. The number of large folio splits will be
|
|
|
|
* considered as the number of non-migrated large folio, no matter how many
|
|
|
|
* split folios of the large folio are migrated successfully.
|
|
|
|
*/
|
|
|
|
int migrate_pages(struct list_head *from, new_page_t get_new_page,
|
|
|
|
free_page_t put_new_page, unsigned long private,
|
|
|
|
enum migrate_mode mode, int reason, unsigned int *ret_succeeded)
|
|
|
|
{
|
|
|
|
int rc, rc_gather;
|
2023-03-03 11:01:55 +08:00
|
|
|
int nr_pages;
|
2023-02-13 20:34:38 +08:00
|
|
|
struct folio *folio, *folio2;
|
|
|
|
LIST_HEAD(folios);
|
|
|
|
LIST_HEAD(ret_folios);
|
2023-03-03 11:01:54 +08:00
|
|
|
LIST_HEAD(split_folios);
|
2023-02-13 20:34:38 +08:00
|
|
|
struct migrate_pages_stats stats;
|
|
|
|
|
|
|
|
trace_mm_migrate_pages_start(mode, reason);
|
|
|
|
|
|
|
|
memset(&stats, 0, sizeof(stats));
|
|
|
|
|
|
|
|
rc_gather = migrate_hugetlbs(from, get_new_page, put_new_page, private,
|
|
|
|
mode, reason, &stats, &ret_folios);
|
|
|
|
if (rc_gather < 0)
|
|
|
|
goto out;
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
again:
|
|
|
|
nr_pages = 0;
|
|
|
|
list_for_each_entry_safe(folio, folio2, from, lru) {
|
|
|
|
/* Retried hugetlb folios will be kept in list */
|
|
|
|
if (folio_test_hugetlb(folio)) {
|
|
|
|
list_move_tail(&folio->lru, &ret_folios);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
nr_pages += folio_nr_pages(folio);
|
2023-03-03 11:01:55 +08:00
|
|
|
if (nr_pages >= NR_MAX_BATCHED_MIGRATION)
|
2023-02-13 20:34:38 +08:00
|
|
|
break;
|
|
|
|
}
|
2023-03-03 11:01:55 +08:00
|
|
|
if (nr_pages >= NR_MAX_BATCHED_MIGRATION)
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
list_cut_before(&folios, from, &folio2->lru);
|
2023-02-13 20:34:38 +08:00
|
|
|
else
|
|
|
|
list_splice_init(from, &folios);
|
2023-03-03 11:01:55 +08:00
|
|
|
if (mode == MIGRATE_ASYNC)
|
|
|
|
rc = migrate_pages_batch(&folios, get_new_page, put_new_page, private,
|
|
|
|
mode, reason, &ret_folios, &split_folios, &stats,
|
|
|
|
NR_MAX_MIGRATE_PAGES_RETRY);
|
|
|
|
else
|
|
|
|
rc = migrate_pages_sync(&folios, get_new_page, put_new_page, private,
|
|
|
|
mode, reason, &ret_folios, &split_folios, &stats);
|
2023-02-13 20:34:38 +08:00
|
|
|
list_splice_tail_init(&folios, &ret_folios);
|
|
|
|
if (rc < 0) {
|
|
|
|
rc_gather = rc;
|
2023-03-03 11:01:54 +08:00
|
|
|
list_splice_tail(&split_folios, &ret_folios);
|
2023-02-13 20:34:38 +08:00
|
|
|
goto out;
|
|
|
|
}
|
2023-03-03 11:01:54 +08:00
|
|
|
if (!list_empty(&split_folios)) {
|
|
|
|
/*
|
|
|
|
* Failure isn't counted since all split folios of a large folio
|
|
|
|
* is counted as 1 failure already. And, we only try to migrate
|
|
|
|
* with minimal effort, force MIGRATE_ASYNC mode and retry once.
|
|
|
|
*/
|
|
|
|
migrate_pages_batch(&split_folios, get_new_page, put_new_page, private,
|
|
|
|
MIGRATE_ASYNC, reason, &ret_folios, NULL, &stats, 1);
|
|
|
|
list_splice_tail_init(&split_folios, &ret_folios);
|
|
|
|
}
|
2023-02-13 20:34:38 +08:00
|
|
|
rc_gather += rc;
|
|
|
|
if (!list_empty(from))
|
|
|
|
goto again;
|
2006-06-23 17:03:53 +08:00
|
|
|
out:
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Put the permanent failure folio back to migration list, they
|
2020-12-15 11:13:06 +08:00
|
|
|
* will be put back to the right list by the caller.
|
|
|
|
*/
|
2022-11-09 09:23:48 +08:00
|
|
|
list_splice(&ret_folios, from);
|
2020-12-15 11:13:06 +08:00
|
|
|
|
2022-10-24 16:34:21 +08:00
|
|
|
/*
|
2022-11-09 09:23:48 +08:00
|
|
|
* Return 0 in case all split folios of fail-to-migrate large folios
|
|
|
|
* are migrated successfully.
|
2022-10-24 16:34:21 +08:00
|
|
|
*/
|
|
|
|
if (list_empty(from))
|
2023-02-13 20:34:38 +08:00
|
|
|
rc_gather = 0;
|
2022-10-24 16:34:21 +08:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
count_vm_events(PGMIGRATE_SUCCESS, stats.nr_succeeded);
|
|
|
|
count_vm_events(PGMIGRATE_FAIL, stats.nr_failed_pages);
|
|
|
|
count_vm_events(THP_MIGRATION_SUCCESS, stats.nr_thp_succeeded);
|
|
|
|
count_vm_events(THP_MIGRATION_FAIL, stats.nr_thp_failed);
|
|
|
|
count_vm_events(THP_MIGRATION_SPLIT, stats.nr_thp_split);
|
|
|
|
trace_mm_migrate_pages(stats.nr_succeeded, stats.nr_failed_pages,
|
|
|
|
stats.nr_thp_succeeded, stats.nr_thp_failed,
|
|
|
|
stats.nr_thp_split, mode, reason);
|
2012-10-19 21:07:31 +08:00
|
|
|
|
2021-09-03 05:59:13 +08:00
|
|
|
if (ret_succeeded)
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
*ret_succeeded = stats.nr_succeeded;
|
2021-09-03 05:59:13 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
return rc_gather;
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2006-06-23 17:03:53 +08:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
struct page *alloc_migration_target(struct page *page, unsigned long private)
|
2020-08-12 09:37:14 +08:00
|
|
|
{
|
2022-04-05 02:35:04 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
struct migration_target_control *mtc;
|
|
|
|
gfp_t gfp_mask;
|
2020-08-12 09:37:14 +08:00
|
|
|
unsigned int order = 0;
|
2023-01-14 06:30:55 +08:00
|
|
|
struct folio *hugetlb_folio = NULL;
|
2022-04-05 02:35:04 +08:00
|
|
|
struct folio *new_folio = NULL;
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
int nid;
|
|
|
|
int zidx;
|
|
|
|
|
|
|
|
mtc = (struct migration_target_control *)private;
|
|
|
|
gfp_mask = mtc->gfp_mask;
|
|
|
|
nid = mtc->nid;
|
|
|
|
if (nid == NUMA_NO_NODE)
|
2022-04-05 02:35:04 +08:00
|
|
|
nid = folio_nid(folio);
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
2022-09-22 23:42:07 +08:00
|
|
|
struct hstate *h = folio_hstate(folio);
|
2020-08-12 09:37:17 +08:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
gfp_mask = htlb_modify_alloc_mask(h, gfp_mask);
|
2023-01-14 06:30:55 +08:00
|
|
|
hugetlb_folio = alloc_hugetlb_folio_nodemask(h, nid,
|
|
|
|
mtc->nmask, gfp_mask);
|
|
|
|
return &hugetlb_folio->page;
|
2020-08-12 09:37:17 +08:00
|
|
|
}
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
if (folio_test_large(folio)) {
|
2020-08-12 09:37:20 +08:00
|
|
|
/*
|
|
|
|
* clear __GFP_RECLAIM to make the migration callback
|
|
|
|
* consistent with regular THP allocations.
|
|
|
|
*/
|
|
|
|
gfp_mask &= ~__GFP_RECLAIM;
|
2020-08-12 09:37:14 +08:00
|
|
|
gfp_mask |= GFP_TRANSHUGE;
|
2022-04-05 02:35:04 +08:00
|
|
|
order = folio_order(folio);
|
2020-08-12 09:37:14 +08:00
|
|
|
}
|
2022-04-05 02:35:04 +08:00
|
|
|
zidx = zone_idx(folio_zone(folio));
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
if (is_highmem_idx(zidx) || zidx == ZONE_MOVABLE)
|
2020-08-12 09:37:14 +08:00
|
|
|
gfp_mask |= __GFP_HIGHMEM;
|
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
new_folio = __folio_alloc(gfp_mask, order, nid, mtc->nmask);
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
return &new_folio->page;
|
2020-08-12 09:37:14 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:55 +08:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
static int store_status(int __user *status, int start, int value, int nr)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
while (nr-- > 0) {
|
|
|
|
if (put_user(value, status + start))
|
|
|
|
return -EFAULT;
|
|
|
|
start++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int do_move_pages_to_node(struct mm_struct *mm,
|
|
|
|
struct list_head *pagelist, int node)
|
|
|
|
{
|
|
|
|
int err;
|
2020-08-12 09:37:28 +08:00
|
|
|
struct migration_target_control mtc = {
|
|
|
|
.nid = node,
|
|
|
|
.gfp_mask = GFP_HIGHUSER_MOVABLE | __GFP_THISNODE,
|
|
|
|
};
|
2018-04-11 07:29:59 +08:00
|
|
|
|
2020-08-12 09:37:28 +08:00
|
|
|
err = migrate_pages(pagelist, alloc_migration_target, NULL,
|
2021-09-03 05:59:13 +08:00
|
|
|
(unsigned long)&mtc, MIGRATE_SYNC, MR_SYSCALL, NULL);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
putback_movable_pages(pagelist);
|
|
|
|
return err;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2018-04-11 07:29:59 +08:00
|
|
|
* Resolves the given address to a struct page, isolates it from the LRU and
|
|
|
|
* puts it to the given pagelist.
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
* Returns:
|
|
|
|
* errno - if the page cannot be found/isolated
|
|
|
|
* 0 - when it doesn't have to be migrated because it is already on the
|
|
|
|
* target node
|
|
|
|
* 1 - when it has been queued
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2023-03-12 19:26:00 +08:00
|
|
|
static int add_page_for_migration(struct mm_struct *mm, const void __user *p,
|
2018-04-11 07:29:59 +08:00
|
|
|
int node, struct list_head *pagelist, bool migrate_all)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
struct vm_area_struct *vma;
|
2023-03-12 19:26:00 +08:00
|
|
|
unsigned long addr;
|
2018-04-11 07:29:59 +08:00
|
|
|
struct page *page;
|
2006-06-23 17:03:55 +08:00
|
|
|
int err;
|
2023-02-15 18:39:36 +08:00
|
|
|
bool isolated;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_lock(mm);
|
2023-03-12 19:26:00 +08:00
|
|
|
addr = (unsigned long)untagged_addr_remote(mm, p);
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EFAULT;
|
2022-04-29 14:16:07 +08:00
|
|
|
vma = vma_lookup(mm, addr);
|
|
|
|
if (!vma || !vma_migratable(vma))
|
2018-04-11 07:29:59 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
/* FOLL_DUMP to ignore special (like zero) pages */
|
2022-03-23 05:45:29 +08:00
|
|
|
page = follow_page(vma, addr, FOLL_GET | FOLL_DUMP);
|
2008-06-21 02:18:25 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = PTR_ERR(page);
|
|
|
|
if (IS_ERR(page))
|
|
|
|
goto out;
|
2008-06-21 02:18:25 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -ENOENT;
|
2022-08-23 21:58:41 +08:00
|
|
|
if (!page)
|
2018-04-11 07:29:59 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2022-08-23 21:58:41 +08:00
|
|
|
if (is_zone_device_page(page))
|
|
|
|
goto out_putpage;
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = 0;
|
|
|
|
if (page_to_nid(page) == node)
|
|
|
|
goto out_putpage;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EACCES;
|
|
|
|
if (page_mapcount(page) > 1 && !migrate_all)
|
|
|
|
goto out_putpage;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
if (PageHuge(page)) {
|
|
|
|
if (PageHead(page)) {
|
2023-02-15 18:39:36 +08:00
|
|
|
isolated = isolate_hugetlb(page_folio(page), pagelist);
|
|
|
|
err = isolated ? 1 : -EBUSY;
|
2013-09-12 05:22:04 +08:00
|
|
|
}
|
2018-04-11 07:29:59 +08:00
|
|
|
} else {
|
|
|
|
struct page *head;
|
2013-09-12 05:22:04 +08:00
|
|
|
|
2017-09-09 07:11:12 +08:00
|
|
|
head = compound_head(page);
|
2023-02-15 18:39:35 +08:00
|
|
|
isolated = isolate_lru_page(head);
|
|
|
|
if (!isolated) {
|
|
|
|
err = -EBUSY;
|
2018-04-11 07:29:59 +08:00
|
|
|
goto out_putpage;
|
2023-02-15 18:39:35 +08:00
|
|
|
}
|
2006-06-23 17:03:55 +08:00
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
err = 1;
|
2018-04-11 07:29:59 +08:00
|
|
|
list_add_tail(&head->lru, pagelist);
|
|
|
|
mod_node_page_state(page_pgdat(head),
|
2020-04-07 11:04:41 +08:00
|
|
|
NR_ISOLATED_ANON + page_is_file_lru(head),
|
2020-08-15 08:30:37 +08:00
|
|
|
thp_nr_pages(head));
|
2018-04-11 07:29:59 +08:00
|
|
|
}
|
|
|
|
out_putpage:
|
|
|
|
/*
|
|
|
|
* Either remove the duplicate refcount from
|
|
|
|
* isolate_lru_page() or drop the page ref if it was
|
|
|
|
* not isolated.
|
|
|
|
*/
|
|
|
|
put_page(page);
|
|
|
|
out:
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_unlock(mm);
|
2006-06-23 17:03:55 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
static int move_pages_and_store_status(struct mm_struct *mm, int node,
|
|
|
|
struct list_head *pagelist, int __user *status,
|
|
|
|
int start, int i, unsigned long nr_pages)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
2020-04-07 11:04:15 +08:00
|
|
|
if (list_empty(pagelist))
|
|
|
|
return 0;
|
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
err = do_move_pages_to_node(mm, pagelist, node);
|
|
|
|
if (err) {
|
|
|
|
/*
|
|
|
|
* Positive err means the number of failed
|
|
|
|
* pages to migrate. Since we are going to
|
|
|
|
* abort and return the number of non-migrated
|
2020-12-15 11:12:52 +08:00
|
|
|
* pages, so need to include the rest of the
|
2020-04-07 11:04:12 +08:00
|
|
|
* nr_pages that have not been attempted as
|
|
|
|
* well.
|
|
|
|
*/
|
|
|
|
if (err > 0)
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
err += nr_pages - i;
|
2020-04-07 11:04:12 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
return store_status(status, start, node, i - start);
|
|
|
|
}
|
|
|
|
|
2008-10-19 11:27:17 +08:00
|
|
|
/*
|
|
|
|
* Migrate an array of page address onto an array of nodes and fill
|
|
|
|
* the corresponding array of status.
|
|
|
|
*/
|
2012-03-22 07:34:06 +08:00
|
|
|
static int do_pages_move(struct mm_struct *mm, nodemask_t task_nodes,
|
2008-10-19 11:27:17 +08:00
|
|
|
unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
const int __user *nodes,
|
|
|
|
int __user *status, int flags)
|
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
int current_node = NUMA_NO_NODE;
|
|
|
|
LIST_HEAD(pagelist);
|
|
|
|
int start, i;
|
|
|
|
int err = 0, err1;
|
2009-06-17 06:32:43 +08:00
|
|
|
|
2021-05-05 09:36:57 +08:00
|
|
|
lru_cache_disable();
|
2009-06-17 06:32:43 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
for (i = start = 0; i < nr_pages; i++) {
|
|
|
|
const void __user *p;
|
|
|
|
int node;
|
2009-01-07 06:38:57 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EFAULT;
|
|
|
|
if (get_user(p, pages + i))
|
|
|
|
goto out_flush;
|
|
|
|
if (get_user(node, nodes + i))
|
|
|
|
goto out_flush;
|
|
|
|
|
|
|
|
err = -ENODEV;
|
|
|
|
if (node < 0 || node >= MAX_NUMNODES)
|
|
|
|
goto out_flush;
|
|
|
|
if (!node_state(node, N_MEMORY))
|
|
|
|
goto out_flush;
|
2008-10-19 11:27:17 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EACCES;
|
|
|
|
if (!node_isset(node, task_nodes))
|
|
|
|
goto out_flush;
|
|
|
|
|
|
|
|
if (current_node == NUMA_NO_NODE) {
|
|
|
|
current_node = node;
|
|
|
|
start = i;
|
|
|
|
} else if (node != current_node) {
|
2020-04-07 11:04:12 +08:00
|
|
|
err = move_pages_and_store_status(mm, current_node,
|
|
|
|
&pagelist, status, start, i, nr_pages);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
start = i;
|
|
|
|
current_node = node;
|
2009-01-07 06:38:57 +08:00
|
|
|
}
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
/*
|
|
|
|
* Errors in the page lookup or isolation are not fatal and we simply
|
|
|
|
* report them via status
|
|
|
|
*/
|
2023-03-12 19:26:00 +08:00
|
|
|
err = add_page_for_migration(mm, p, current_node, &pagelist,
|
|
|
|
flags & MPOL_MF_MOVE_ALL);
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
|
2020-04-07 11:04:18 +08:00
|
|
|
if (err > 0) {
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
/* The page is successfully queued for migration */
|
|
|
|
continue;
|
|
|
|
}
|
2009-01-07 06:38:57 +08:00
|
|
|
|
2022-03-23 05:39:40 +08:00
|
|
|
/*
|
|
|
|
* The move_pages() man page does not have an -EEXIST choice, so
|
|
|
|
* use -EFAULT instead.
|
|
|
|
*/
|
|
|
|
if (err == -EEXIST)
|
|
|
|
err = -EFAULT;
|
|
|
|
|
2020-04-07 11:04:18 +08:00
|
|
|
/*
|
|
|
|
* If the page is already on the target node (!err), store the
|
|
|
|
* node, otherwise, store the err.
|
|
|
|
*/
|
|
|
|
err = store_status(status, i, err ? : current_node, 1);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
goto out_flush;
|
2008-10-19 11:27:17 +08:00
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
err = move_pages_and_store_status(mm, current_node, &pagelist,
|
|
|
|
status, start, i, nr_pages);
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
if (err) {
|
|
|
|
/* We have accounted for page i */
|
|
|
|
if (err > 0)
|
|
|
|
err--;
|
2020-04-07 11:04:09 +08:00
|
|
|
goto out;
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
}
|
2018-04-11 07:29:59 +08:00
|
|
|
current_node = NUMA_NO_NODE;
|
2009-01-07 06:38:57 +08:00
|
|
|
}
|
2018-04-11 07:29:59 +08:00
|
|
|
out_flush:
|
|
|
|
/* Make sure we do not overwrite the existing error */
|
2020-04-07 11:04:12 +08:00
|
|
|
err1 = move_pages_and_store_status(mm, current_node, &pagelist,
|
|
|
|
status, start, i, nr_pages);
|
2020-01-31 14:11:14 +08:00
|
|
|
if (err >= 0)
|
2018-04-11 07:29:59 +08:00
|
|
|
err = err1;
|
2008-10-19 11:27:17 +08:00
|
|
|
out:
|
2021-05-05 09:36:57 +08:00
|
|
|
lru_cache_enable();
|
2008-10-19 11:27:17 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:55 +08:00
|
|
|
/*
|
2008-10-19 11:27:16 +08:00
|
|
|
* Determine the nodes of an array of pages and store it in an array of status.
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2008-12-10 05:14:23 +08:00
|
|
|
static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
|
|
|
|
const void __user **pages, int *status)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2008-10-19 11:27:16 +08:00
|
|
|
unsigned long i;
|
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_lock(mm);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2008-10-19 11:27:16 +08:00
|
|
|
for (i = 0; i < nr_pages; i++) {
|
2008-12-10 05:14:23 +08:00
|
|
|
unsigned long addr = (unsigned long)(*pages);
|
2006-06-23 17:03:55 +08:00
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct page *page;
|
2008-12-16 15:06:43 +08:00
|
|
|
int err = -EFAULT;
|
2008-10-19 11:27:16 +08:00
|
|
|
|
2021-06-29 10:39:44 +08:00
|
|
|
vma = vma_lookup(mm, addr);
|
|
|
|
if (!vma)
|
2006-06-23 17:03:55 +08:00
|
|
|
goto set_status;
|
|
|
|
|
2015-09-05 06:47:53 +08:00
|
|
|
/* FOLL_DUMP to ignore special (like zero) pages */
|
2022-11-09 16:40:27 +08:00
|
|
|
page = follow_page(vma, addr, FOLL_GET | FOLL_DUMP);
|
2008-06-21 02:18:25 +08:00
|
|
|
|
|
|
|
err = PTR_ERR(page);
|
|
|
|
if (IS_ERR(page))
|
|
|
|
goto set_status;
|
|
|
|
|
2022-08-23 21:58:41 +08:00
|
|
|
err = -ENOENT;
|
|
|
|
if (!page)
|
|
|
|
goto set_status;
|
|
|
|
|
|
|
|
if (!is_zone_device_page(page))
|
2022-04-29 14:16:08 +08:00
|
|
|
err = page_to_nid(page);
|
2022-08-23 21:58:41 +08:00
|
|
|
|
2022-11-09 16:40:27 +08:00
|
|
|
put_page(page);
|
2006-06-23 17:03:55 +08:00
|
|
|
set_status:
|
2008-12-10 05:14:23 +08:00
|
|
|
*status = err;
|
|
|
|
|
|
|
|
pages++;
|
|
|
|
status++;
|
|
|
|
}
|
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_unlock(mm);
|
2008-12-10 05:14:23 +08:00
|
|
|
}
|
|
|
|
|
2021-09-09 06:18:17 +08:00
|
|
|
static int get_compat_pages_array(const void __user *chunk_pages[],
|
|
|
|
const void __user * __user *pages,
|
|
|
|
unsigned long chunk_nr)
|
|
|
|
{
|
|
|
|
compat_uptr_t __user *pages32 = (compat_uptr_t __user *)pages;
|
|
|
|
compat_uptr_t p;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < chunk_nr; i++) {
|
|
|
|
if (get_user(p, pages32 + i))
|
|
|
|
return -EFAULT;
|
|
|
|
chunk_pages[i] = compat_ptr(p);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-12-10 05:14:23 +08:00
|
|
|
/*
|
|
|
|
* Determine the nodes of a user array of pages and store it in
|
|
|
|
* a user array of status.
|
|
|
|
*/
|
|
|
|
static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
int __user *status)
|
|
|
|
{
|
2022-04-29 14:16:07 +08:00
|
|
|
#define DO_PAGES_STAT_CHUNK_NR 16UL
|
2008-12-10 05:14:23 +08:00
|
|
|
const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
|
|
|
|
int chunk_status[DO_PAGES_STAT_CHUNK_NR];
|
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
while (nr_pages) {
|
2022-04-29 14:16:07 +08:00
|
|
|
unsigned long chunk_nr = min(nr_pages, DO_PAGES_STAT_CHUNK_NR);
|
2010-02-19 08:13:40 +08:00
|
|
|
|
2021-09-09 06:18:17 +08:00
|
|
|
if (in_compat_syscall()) {
|
|
|
|
if (get_compat_pages_array(chunk_pages, pages,
|
|
|
|
chunk_nr))
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
if (copy_from_user(chunk_pages, pages,
|
|
|
|
chunk_nr * sizeof(*chunk_pages)))
|
|
|
|
break;
|
|
|
|
}
|
2008-12-10 05:14:23 +08:00
|
|
|
|
|
|
|
do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
|
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
|
|
|
|
break;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
pages += chunk_nr;
|
|
|
|
status += chunk_nr;
|
|
|
|
nr_pages -= chunk_nr;
|
|
|
|
}
|
|
|
|
return nr_pages ? -EFAULT : 0;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
static struct mm_struct *find_mm_struct(pid_t pid, nodemask_t *mem_nodes)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
/*
|
|
|
|
* There is no need to check if current process has the right to modify
|
|
|
|
* the specified process when they are same.
|
|
|
|
*/
|
|
|
|
if (!pid) {
|
|
|
|
mmget(current->mm);
|
|
|
|
*mem_nodes = cpuset_mems_allowed(current);
|
|
|
|
return current->mm;
|
|
|
|
}
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
/* Find the mm_struct */
|
2011-02-26 06:44:13 +08:00
|
|
|
rcu_read_lock();
|
2020-10-18 07:14:03 +08:00
|
|
|
task = find_task_by_vpid(pid);
|
2006-06-23 17:03:55 +08:00
|
|
|
if (!task) {
|
2011-02-26 06:44:13 +08:00
|
|
|
rcu_read_unlock();
|
2020-10-18 07:14:03 +08:00
|
|
|
return ERR_PTR(-ESRCH);
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
2012-03-22 07:34:06 +08:00
|
|
|
get_task_struct(task);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if this process has the right to modify the specified
|
2017-08-21 04:26:27 +08:00
|
|
|
* process. Use the regular "ptrace_may_access()" checks.
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2017-08-21 04:26:27 +08:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS)) {
|
2008-11-14 07:39:19 +08:00
|
|
|
rcu_read_unlock();
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(-EPERM);
|
2008-10-19 11:27:17 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
2008-11-14 07:39:19 +08:00
|
|
|
rcu_read_unlock();
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(security_task_movememory(task));
|
|
|
|
if (IS_ERR(mm))
|
2008-10-19 11:27:17 +08:00
|
|
|
goto out;
|
2020-10-18 07:14:03 +08:00
|
|
|
*mem_nodes = cpuset_mems_allowed(task);
|
2012-03-22 07:34:06 +08:00
|
|
|
mm = get_task_mm(task);
|
2020-10-18 07:14:03 +08:00
|
|
|
out:
|
2012-03-22 07:34:06 +08:00
|
|
|
put_task_struct(task);
|
2012-04-26 07:01:53 +08:00
|
|
|
if (!mm)
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(-EINVAL);
|
|
|
|
return mm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Move a list of pages in the address space of the currently executing
|
|
|
|
* process.
|
|
|
|
*/
|
|
|
|
static int kernel_move_pages(pid_t pid, unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
const int __user *nodes,
|
|
|
|
int __user *status, int flags)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm;
|
|
|
|
int err;
|
|
|
|
nodemask_t task_nodes;
|
|
|
|
|
|
|
|
/* Check flags */
|
|
|
|
if (flags & ~(MPOL_MF_MOVE|MPOL_MF_MOVE_ALL))
|
2012-04-26 07:01:53 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
if ((flags & MPOL_MF_MOVE_ALL) && !capable(CAP_SYS_NICE))
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
mm = find_mm_struct(pid, &task_nodes);
|
|
|
|
if (IS_ERR(mm))
|
|
|
|
return PTR_ERR(mm);
|
|
|
|
|
2012-04-26 07:01:53 +08:00
|
|
|
if (nodes)
|
|
|
|
err = do_pages_move(mm, task_nodes, nr_pages, pages,
|
|
|
|
nodes, status, flags);
|
|
|
|
else
|
|
|
|
err = do_pages_stat(mm, nr_pages, pages, status);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
mmput(mm);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2018-03-17 23:08:03 +08:00
|
|
|
SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
|
|
|
|
const void __user * __user *, pages,
|
|
|
|
const int __user *, nodes,
|
|
|
|
int __user *, status, int, flags)
|
|
|
|
{
|
|
|
|
return kernel_move_pages(pid, nr_pages, pages, nodes, status, flags);
|
|
|
|
}
|
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
|
|
|
/*
|
|
|
|
* Returns true if this is a safe migration target node for misplaced NUMA
|
2022-04-29 14:16:03 +08:00
|
|
|
* pages. Currently it only checks the watermarks which is crude.
|
2012-10-25 20:16:34 +08:00
|
|
|
*/
|
|
|
|
static bool migrate_balanced_pgdat(struct pglist_data *pgdat,
|
2013-02-23 08:34:27 +08:00
|
|
|
unsigned long nr_migrate_pages)
|
2012-10-25 20:16:34 +08:00
|
|
|
{
|
|
|
|
int z;
|
2016-07-29 06:45:31 +08:00
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
|
|
|
|
struct zone *zone = pgdat->node_zones + z;
|
|
|
|
|
2022-04-29 14:16:03 +08:00
|
|
|
if (!managed_zone(zone))
|
2012-10-25 20:16:34 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Avoid waking kswapd by allocating pages_to_migrate pages. */
|
|
|
|
if (!zone_watermark_ok(zone, 0,
|
|
|
|
high_wmark_pages(zone) +
|
|
|
|
nr_migrate_pages,
|
autonuma: fix watermark checking in migrate_balanced_pgdat()
When zone_watermark_ok() is called in migrate_balanced_pgdat() to check
migration target node, the parameter classzone_idx (for requested zone)
is specified as 0 (ZONE_DMA). But when allocating memory for autonuma
in alloc_misplaced_dst_page(), the requested zone from GFP flags is
ZONE_MOVABLE. That is, the requested zone is different. The size of
lowmem_reserve for the different requested zone is different. And this
may cause some issues.
For example, in the zoneinfo of a test machine as below,
Node 0, zone DMA32
pages free 61592
min 29
low 454
high 879
spanned 1044480
present 442306
managed 425921
protection: (0, 0, 62457, 62457, 62457)
The free page number of ZONE_DMA32 is greater than "high watermark +
lowmem_reserve[ZONE_DMA]", but less than "high watermark +
lowmem_reserve[ZONE_MOVABLE]". And because __alloc_pages_node() in
alloc_misplaced_dst_page() requests ZONE_MOVABLE, the
zone_watermark_ok() on ZONE_DMA32 in migrate_balanced_pgdat() may always
return true. So, autonuma may not stop even when memory pressure in
node 0 is heavy.
To fix the issue, ZONE_MOVABLE is used as parameter to call
zone_watermark_ok() in migrate_balanced_pgdat(). This makes it same as
requested zone in alloc_misplaced_dst_page(). So that
migrate_balanced_pgdat() returns false when memory pressure is heavy.
Link: http://lkml.kernel.org/r/20191101075727.26683-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 09:57:28 +08:00
|
|
|
ZONE_MOVABLE, 0))
|
2012-10-25 20:16:34 +08:00
|
|
|
continue;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct page *alloc_misplaced_dst_page(struct page *page,
|
2018-04-11 07:30:03 +08:00
|
|
|
unsigned long data)
|
2012-10-25 20:16:34 +08:00
|
|
|
{
|
|
|
|
int nid = (int) data;
|
2021-07-06 22:50:39 +08:00
|
|
|
int order = compound_order(page);
|
|
|
|
gfp_t gfp = __GFP_THISNODE;
|
|
|
|
struct folio *new;
|
|
|
|
|
|
|
|
if (order > 0)
|
|
|
|
gfp |= GFP_TRANSHUGE_LIGHT;
|
|
|
|
else {
|
|
|
|
gfp |= GFP_HIGHUSER_MOVABLE | __GFP_NOMEMALLOC | __GFP_NORETRY |
|
|
|
|
__GFP_NOWARN;
|
|
|
|
gfp &= ~__GFP_RECLAIM;
|
|
|
|
}
|
|
|
|
new = __folio_alloc_node(gfp, order, nid);
|
2021-07-01 09:51:42 +08:00
|
|
|
|
2021-07-06 22:50:39 +08:00
|
|
|
return &new->page;
|
2021-07-01 09:51:42 +08:00
|
|
|
}
|
|
|
|
|
2014-01-22 07:50:58 +08:00
|
|
|
static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
|
2012-11-19 20:35:47 +08:00
|
|
|
{
|
2021-09-09 06:18:01 +08:00
|
|
|
int nr_pages = thp_nr_pages(page);
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
int order = compound_order(page);
|
2012-11-15 05:41:46 +08:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
VM_BUG_ON_PAGE(order && !PageTransHuge(page), page);
|
2013-02-23 08:34:27 +08:00
|
|
|
|
2021-07-01 09:51:51 +08:00
|
|
|
/* Do not migrate THP mapped by multiple processes */
|
|
|
|
if (PageTransHuge(page) && total_mapcount(page) > 1)
|
|
|
|
return 0;
|
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
/* Avoid migrating to a node that is nearly full */
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
if (!migrate_balanced_pgdat(pgdat, nr_pages)) {
|
|
|
|
int z;
|
|
|
|
|
|
|
|
if (!(sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING))
|
|
|
|
return 0;
|
|
|
|
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
|
2022-04-29 14:16:03 +08:00
|
|
|
if (managed_zone(pgdat->node_zones + z))
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
wakeup_kswapd(pgdat->node_zones + z, 0, order, ZONE_MOVABLE);
|
2013-02-23 08:34:33 +08:00
|
|
|
return 0;
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
}
|
2012-10-25 20:16:34 +08:00
|
|
|
|
2023-02-15 18:39:35 +08:00
|
|
|
if (!isolate_lru_page(page))
|
2013-02-23 08:34:33 +08:00
|
|
|
return 0;
|
2012-10-25 20:16:34 +08:00
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON + page_is_file_lru(page),
|
2021-09-09 06:18:01 +08:00
|
|
|
nr_pages);
|
2013-02-23 08:34:33 +08:00
|
|
|
|
2012-11-27 22:03:05 +08:00
|
|
|
/*
|
2013-02-23 08:34:33 +08:00
|
|
|
* Isolating the page has taken another reference, so the
|
|
|
|
* caller's reference can be safely dropped without the page
|
|
|
|
* disappearing underneath us during migration.
|
2012-11-27 22:03:05 +08:00
|
|
|
*/
|
|
|
|
put_page(page);
|
2013-02-23 08:34:33 +08:00
|
|
|
return 1;
|
2012-11-19 20:35:47 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to migrate a misplaced page to the specified destination
|
|
|
|
* node. Caller is expected to have an elevated reference count on
|
|
|
|
* the page that will be dropped by this function before returning.
|
|
|
|
*/
|
2013-10-07 18:29:05 +08:00
|
|
|
int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
|
|
|
|
int node)
|
2012-11-19 20:35:47 +08:00
|
|
|
{
|
|
|
|
pg_data_t *pgdat = NODE_DATA(node);
|
2013-02-23 08:34:33 +08:00
|
|
|
int isolated;
|
2012-11-19 20:35:47 +08:00
|
|
|
int nr_remaining;
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:20 +08:00
|
|
|
unsigned int nr_succeeded;
|
2012-11-19 20:35:47 +08:00
|
|
|
LIST_HEAD(migratepages);
|
2021-07-30 05:53:47 +08:00
|
|
|
int nr_pages = thp_nr_pages(page);
|
2021-07-01 09:51:42 +08:00
|
|
|
|
2012-11-19 20:35:47 +08:00
|
|
|
/*
|
2013-10-07 18:29:05 +08:00
|
|
|
* Don't migrate file pages that are mapped in multiple processes
|
|
|
|
* with execute permissions as they are probably shared libraries.
|
2012-11-19 20:35:47 +08:00
|
|
|
*/
|
2021-05-05 09:37:16 +08:00
|
|
|
if (page_mapcount(page) != 1 && page_is_file_lru(page) &&
|
|
|
|
(vma->vm_flags & VM_EXEC))
|
2012-11-19 20:35:47 +08:00
|
|
|
goto out;
|
|
|
|
|
2018-04-11 07:29:20 +08:00
|
|
|
/*
|
|
|
|
* Also do not migrate dirty pages as not all filesystems can move
|
|
|
|
* dirty pages in MIGRATE_ASYNC mode which is a waste of cycles.
|
|
|
|
*/
|
2020-04-07 11:04:41 +08:00
|
|
|
if (page_is_file_lru(page) && PageDirty(page))
|
2018-04-11 07:29:20 +08:00
|
|
|
goto out;
|
|
|
|
|
2012-11-19 20:35:47 +08:00
|
|
|
isolated = numamigrate_isolate_page(pgdat, page);
|
|
|
|
if (!isolated)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
list_add(&page->lru, &migratepages);
|
2021-07-06 22:50:39 +08:00
|
|
|
nr_remaining = migrate_pages(&migratepages, alloc_misplaced_dst_page,
|
|
|
|
NULL, node, MIGRATE_ASYNC,
|
|
|
|
MR_NUMA_MISPLACED, &nr_succeeded);
|
2012-11-19 20:35:47 +08:00
|
|
|
if (nr_remaining) {
|
2014-01-22 07:51:17 +08:00
|
|
|
if (!list_empty(&migratepages)) {
|
|
|
|
list_del(&page->lru);
|
2021-07-01 09:51:45 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
|
|
|
|
page_is_file_lru(page), -nr_pages);
|
2014-01-22 07:51:17 +08:00
|
|
|
putback_lru_page(page);
|
|
|
|
}
|
2012-11-19 20:35:47 +08:00
|
|
|
isolated = 0;
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:20 +08:00
|
|
|
}
|
|
|
|
if (nr_succeeded) {
|
|
|
|
count_vm_numa_events(NUMA_PAGE_MIGRATE, nr_succeeded);
|
|
|
|
if (!node_is_toptier(page_to_nid(page)) && node_is_toptier(node))
|
|
|
|
mod_node_page_state(pgdat, PGPROMOTE_SUCCESS,
|
|
|
|
nr_succeeded);
|
|
|
|
}
|
2012-10-25 20:16:34 +08:00
|
|
|
BUG_ON(!list_empty(&migratepages));
|
|
|
|
return isolated;
|
2013-02-23 08:34:33 +08:00
|
|
|
|
|
|
|
out:
|
|
|
|
put_page(page);
|
|
|
|
return 0;
|
2012-10-25 20:16:34 +08:00
|
|
|
}
|
2012-12-05 17:32:56 +08:00
|
|
|
#endif /* CONFIG_NUMA_BALANCING */
|
2022-08-18 21:10:34 +08:00
|
|
|
#endif /* CONFIG_NUMA */
|