2009-06-03 05:17:38 +08:00
|
|
|
/*
|
|
|
|
|
* This file contains the 64-bit "server" PowerPC variant
|
|
|
|
|
* of the low level exception handling including exception
|
|
|
|
|
* vectors, exception return, part of the slb and stab
|
|
|
|
|
* handling and other fixed offset specific things.
|
|
|
|
|
*
|
|
|
|
|
* This file is meant to be #included from head_64.S due to
|
2011-03-31 09:57:33 +08:00
|
|
|
* position dependent assembly.
|
2009-06-03 05:17:38 +08:00
|
|
|
*
|
|
|
|
|
* Most of this originates from head_64.S and thus has the same
|
|
|
|
|
* copyright history.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
#include <asm/hw_irq.h>
|
2009-07-15 04:52:52 +08:00
|
|
|
#include <asm/exception-64s.h>
|
2010-11-18 23:06:17 +08:00
|
|
|
#include <asm/ptrace.h>
|
2014-12-10 02:56:52 +08:00
|
|
|
#include <asm/cpuidle.h>
|
2016-09-30 17:43:18 +08:00
|
|
|
#include <asm/head-64.h>
|
2009-07-15 04:52:52 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/*
|
2016-09-28 09:31:48 +08:00
|
|
|
* There are a few constraints to be concerned with.
|
|
|
|
|
* - Real mode exceptions code/data must be located at their physical location.
|
|
|
|
|
* - Virtual mode exceptions must be mapped at their 0xc000... location.
|
|
|
|
|
* - Fixed location code must not call directly beyond the __end_interrupts
|
|
|
|
|
* area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
|
|
|
|
|
* must be used.
|
|
|
|
|
* - LOAD_HANDLER targets must be within first 64K of physical 0 /
|
|
|
|
|
* virtual 0xc00...
|
|
|
|
|
* - Conditional branch targets must be within +/-32K of caller.
|
|
|
|
|
*
|
|
|
|
|
* "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
|
|
|
|
|
* therefore don't have to run in physically located code or rfid to
|
|
|
|
|
* virtual mode kernel code. However on relocatable kernels they do have
|
|
|
|
|
* to branch to KERNELBASE offset because the rest of the kernel (outside
|
|
|
|
|
* the exception vectors) may be located elsewhere.
|
|
|
|
|
*
|
|
|
|
|
* Virtual exceptions correspond with physical, except their entry points
|
|
|
|
|
* are offset by 0xc000000000000000 and also tend to get an added 0x4000
|
|
|
|
|
* offset applied. Virtual exceptions are enabled with the Alternate
|
|
|
|
|
* Interrupt Location (AIL) bit set in the LPCR. However this does not
|
|
|
|
|
* guarantee they will be delivered virtually. Some conditions (see the ISA)
|
|
|
|
|
* cause exceptions to be delivered in real mode.
|
|
|
|
|
*
|
|
|
|
|
* It's impossible to receive interrupts below 0x300 via AIL.
|
|
|
|
|
*
|
|
|
|
|
* KVM: None of the virtual exceptions are from the guest. Anything that
|
|
|
|
|
* escalated to HV=1 from HV=0 is delivered via real mode handlers.
|
|
|
|
|
*
|
|
|
|
|
*
|
2009-06-03 05:17:38 +08:00
|
|
|
* We layout physical memory as follows:
|
|
|
|
|
* 0x0000 - 0x00ff : Secondary processor spin code
|
2016-09-28 09:31:48 +08:00
|
|
|
* 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
|
|
|
|
|
* 0x1900 - 0x3fff : Real mode trampolines
|
|
|
|
|
* 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
|
|
|
|
|
* 0x5900 - 0x6fff : Relon mode trampolines
|
2009-06-03 05:17:38 +08:00
|
|
|
* 0x7000 - 0x7fff : FWNMI data area
|
2016-09-28 09:31:48 +08:00
|
|
|
* 0x8000 - .... : Common interrupt handlers, remaining early
|
|
|
|
|
* setup code, rest of kernel.
|
2016-09-21 15:44:07 +08:00
|
|
|
*
|
|
|
|
|
* We could reclaim 0x4000-0x42ff for real mode trampolines if the space
|
|
|
|
|
* is necessary. Until then it's more consistent to explicitly put VIRT_NONE
|
|
|
|
|
* vectors there.
|
2016-09-28 09:31:48 +08:00
|
|
|
*/
|
|
|
|
|
OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900)
|
|
|
|
|
OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000)
|
|
|
|
|
OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900)
|
|
|
|
|
OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000)
|
|
|
|
|
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
|
|
|
|
|
/*
|
|
|
|
|
* Data area reserved for FWNMI option.
|
|
|
|
|
* This address (0x7000) is fixed by the RPA.
|
|
|
|
|
* pseries and powernv need to keep the whole page from
|
|
|
|
|
* 0x7000 to 0x8000 free for use by the firmware
|
2009-06-03 05:17:38 +08:00
|
|
|
*/
|
2016-09-28 09:31:48 +08:00
|
|
|
ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000)
|
|
|
|
|
OPEN_TEXT_SECTION(0x8000)
|
|
|
|
|
#else
|
|
|
|
|
OPEN_TEXT_SECTION(0x7000)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
USE_FIXED_SECTION(real_vectors)
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/*
|
|
|
|
|
* This is the start of the interrupt handlers for pSeries
|
|
|
|
|
* This code runs with relocation off.
|
|
|
|
|
* Code from here to __end_interrupts gets copied down to real
|
|
|
|
|
* address 0x100 when we are running a relocatable kernel.
|
|
|
|
|
* Therefore any relative branches in this section must only
|
|
|
|
|
* branch to labels in this section.
|
|
|
|
|
*/
|
|
|
|
|
.globl __start_interrupts
|
|
|
|
|
__start_interrupts:
|
|
|
|
|
|
2016-09-21 15:44:07 +08:00
|
|
|
/* No virt vectors corresponding with 0x0..0x100 */
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_NONE(0x4000, 0x100)
|
2016-09-21 15:44:07 +08:00
|
|
|
|
2016-10-13 10:17:14 +08:00
|
|
|
|
2011-01-24 15:42:41 +08:00
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
2016-10-13 10:17:14 +08:00
|
|
|
/*
|
|
|
|
|
* If running native on arch 2.06 or later, check if we are waking up
|
2017-06-25 01:29:01 +08:00
|
|
|
* from nap/sleep/winkle, and branch to idle handler. This tests SRR1
|
|
|
|
|
* bits 46:47. A non-0 value indicates that we are coming from a power
|
|
|
|
|
* saving state. The idle wakeup handler initially runs in real mode,
|
|
|
|
|
* but we branch to the 0xc000... address so we can turn on relocation
|
|
|
|
|
* with mtmsr.
|
2011-01-24 15:42:41 +08:00
|
|
|
*/
|
2016-10-13 10:17:14 +08:00
|
|
|
#define IDLETEST(n) \
|
|
|
|
|
BEGIN_FTR_SECTION ; \
|
|
|
|
|
mfspr r10,SPRN_SRR1 ; \
|
|
|
|
|
rlwinm. r10,r10,47-31,30,31 ; \
|
|
|
|
|
beq- 1f ; \
|
|
|
|
|
cmpwi cr3,r10,2 ; \
|
2017-06-13 21:05:50 +08:00
|
|
|
BRANCH_TO_C000(r10, system_reset_idle_common) ; \
|
2016-10-13 10:17:14 +08:00
|
|
|
1: \
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
|
|
|
|
|
#else
|
|
|
|
|
#define IDLETEST NOTEST
|
|
|
|
|
#endif
|
KVM: PPC: Allow book3s_hv guests to use SMT processor modes
This lifts the restriction that book3s_hv guests can only run one
hardware thread per core, and allows them to use up to 4 threads
per core on POWER7. The host still has to run single-threaded.
This capability is advertised to qemu through a new KVM_CAP_PPC_SMT
capability. The return value of the ioctl querying this capability
is the number of vcpus per virtual CPU core (vcore), currently 4.
To use this, the host kernel should be booted with all threads
active, and then all the secondary threads should be offlined.
This will put the secondary threads into nap mode. KVM will then
wake them from nap mode and use them for running guest code (while
they are still offline). To wake the secondary threads, we send
them an IPI using a new xics_wake_cpu() function, implemented in
arch/powerpc/sysdev/xics/icp-native.c. In other words, at this stage
we assume that the platform has a XICS interrupt controller and
we are using icp-native.c to drive it. Since the woken thread will
need to acknowledge and clear the IPI, we also export the base
physical address of the XICS registers using kvmppc_set_xics_phys()
for use in the low-level KVM book3s code.
When a vcpu is created, it is assigned to a virtual CPU core.
The vcore number is obtained by dividing the vcpu number by the
number of threads per core in the host. This number is exported
to userspace via the KVM_CAP_PPC_SMT capability. If qemu wishes
to run the guest in single-threaded mode, it should make all vcpu
numbers be multiples of the number of threads per core.
We distinguish three states of a vcpu: runnable (i.e., ready to execute
the guest), blocked (that is, idle), and busy in host. We currently
implement a policy that the vcore can run only when all its threads
are runnable or blocked. This way, if a vcpu needs to execute elsewhere
in the kernel or in qemu, it can do so without being starved of CPU
by the other vcpus.
When a vcore starts to run, it executes in the context of one of the
vcpu threads. The other vcpu threads all go to sleep and stay asleep
until something happens requiring the vcpu thread to return to qemu,
or to wake up to run the vcore (this can happen when another vcpu
thread goes from busy in host state to blocked).
It can happen that a vcpu goes from blocked to runnable state (e.g.
because of an interrupt), and the vcore it belongs to is already
running. In that case it can start to run immediately as long as
the none of the vcpus in the vcore have started to exit the guest.
We send the next free thread in the vcore an IPI to get it to start
to execute the guest. It synchronizes with the other threads via
the vcore->entry_exit_count field to make sure that it doesn't go
into the guest if the other vcpus are exiting by the time that it
is ready to actually enter the guest.
Note that there is no fixed relationship between the hardware thread
number and the vcpu number. Hardware threads are assigned to vcpus
as they become runnable, so we will always use the lower-numbered
hardware threads in preference to higher-numbered threads if not all
the vcpus in the vcore are runnable, regardless of which vcpus are
runnable.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:23:08 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(system_reset, 0x100, 0x100)
|
2016-10-13 10:17:14 +08:00
|
|
|
SET_SCRATCH0(r13)
|
2016-12-20 02:30:05 +08:00
|
|
|
/*
|
|
|
|
|
* MSR_RI is not enabled, because PACA_EXNMI and nmi stack is
|
|
|
|
|
* being used, so a nested NMI exception would corrupt it.
|
|
|
|
|
*/
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_NORI(PACA_EXNMI, system_reset_common, EXC_STD,
|
2016-10-13 10:17:14 +08:00
|
|
|
IDLETEST, 0x100)
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(system_reset, 0x100, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x4100, 0x100)
|
2016-10-13 10:17:14 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
|
|
|
EXC_COMMON_BEGIN(system_reset_idle_common)
|
2017-06-13 21:05:51 +08:00
|
|
|
mfspr r12,SPRN_SRR1
|
2017-04-19 21:05:44 +08:00
|
|
|
b pnv_powersave_wakeup
|
KVM: PPC: Allow book3s_hv guests to use SMT processor modes
This lifts the restriction that book3s_hv guests can only run one
hardware thread per core, and allows them to use up to 4 threads
per core on POWER7. The host still has to run single-threaded.
This capability is advertised to qemu through a new KVM_CAP_PPC_SMT
capability. The return value of the ioctl querying this capability
is the number of vcpus per virtual CPU core (vcore), currently 4.
To use this, the host kernel should be booted with all threads
active, and then all the secondary threads should be offlined.
This will put the secondary threads into nap mode. KVM will then
wake them from nap mode and use them for running guest code (while
they are still offline). To wake the secondary threads, we send
them an IPI using a new xics_wake_cpu() function, implemented in
arch/powerpc/sysdev/xics/icp-native.c. In other words, at this stage
we assume that the platform has a XICS interrupt controller and
we are using icp-native.c to drive it. Since the woken thread will
need to acknowledge and clear the IPI, we also export the base
physical address of the XICS registers using kvmppc_set_xics_phys()
for use in the low-level KVM book3s code.
When a vcpu is created, it is assigned to a virtual CPU core.
The vcore number is obtained by dividing the vcpu number by the
number of threads per core in the host. This number is exported
to userspace via the KVM_CAP_PPC_SMT capability. If qemu wishes
to run the guest in single-threaded mode, it should make all vcpu
numbers be multiples of the number of threads per core.
We distinguish three states of a vcpu: runnable (i.e., ready to execute
the guest), blocked (that is, idle), and busy in host. We currently
implement a policy that the vcore can run only when all its threads
are runnable or blocked. This way, if a vcpu needs to execute elsewhere
in the kernel or in qemu, it can do so without being starved of CPU
by the other vcpus.
When a vcore starts to run, it executes in the context of one of the
vcpu threads. The other vcpu threads all go to sleep and stay asleep
until something happens requiring the vcpu thread to return to qemu,
or to wake up to run the vcore (this can happen when another vcpu
thread goes from busy in host state to blocked).
It can happen that a vcpu goes from blocked to runnable state (e.g.
because of an interrupt), and the vcore it belongs to is already
running. In that case it can start to run immediately as long as
the none of the vcpus in the vcore have started to exit the guest.
We send the next free thread in the vcore an IPI to get it to start
to execute the guest. It synchronizes with the other threads via
the vcore->entry_exit_count field to make sure that it doesn't go
into the guest if the other vcpus are exiting by the time that it
is ready to actually enter the guest.
Note that there is no fixed relationship between the hardware thread
number and the vcpu number. Hardware threads are assigned to vcpus
as they become runnable, so we will always use the lower-numbered
hardware threads in preference to higher-numbered threads if not all
the vcpus in the vcore are runnable, regardless of which vcpus are
runnable.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:23:08 +08:00
|
|
|
#endif
|
|
|
|
|
|
2016-12-20 02:30:04 +08:00
|
|
|
EXC_COMMON_BEGIN(system_reset_common)
|
2016-12-20 02:30:05 +08:00
|
|
|
/*
|
|
|
|
|
* Increment paca->in_nmi then enable MSR_RI. SLB or MCE will be able
|
|
|
|
|
* to recover, but nested NMI will notice in_nmi and not recover
|
|
|
|
|
* because of the use of the NMI stack. in_nmi reentrancy is tested in
|
|
|
|
|
* system_reset_exception.
|
|
|
|
|
*/
|
|
|
|
|
lhz r10,PACA_IN_NMI(r13)
|
|
|
|
|
addi r10,r10,1
|
|
|
|
|
sth r10,PACA_IN_NMI(r13)
|
|
|
|
|
li r10,MSR_RI
|
|
|
|
|
mtmsrd r10,1
|
2014-02-26 08:08:25 +08:00
|
|
|
|
2016-12-20 02:30:06 +08:00
|
|
|
mr r10,r1
|
|
|
|
|
ld r1,PACA_NMI_EMERG_SP(r13)
|
|
|
|
|
subi r1,r1,INT_FRAME_SIZE
|
|
|
|
|
EXCEPTION_COMMON_NORET_STACK(PACA_EXNMI, 0x100,
|
|
|
|
|
system_reset, system_reset_exception,
|
2016-12-20 02:30:05 +08:00
|
|
|
ADD_NVGPRS;ADD_RECONCILE)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The stack is no longer in use, decrement in_nmi.
|
|
|
|
|
*/
|
|
|
|
|
lhz r10,PACA_IN_NMI(r13)
|
|
|
|
|
subi r10,r10,1
|
|
|
|
|
sth r10,PACA_IN_NMI(r13)
|
|
|
|
|
|
|
|
|
|
b ret_from_except
|
2016-09-21 15:43:30 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_PSERIES
|
|
|
|
|
/*
|
|
|
|
|
* Vectors for the FWNMI option. Share common code.
|
|
|
|
|
*/
|
|
|
|
|
TRAMP_REAL_BEGIN(system_reset_fwnmi)
|
|
|
|
|
SET_SCRATCH0(r13) /* save r13 */
|
2016-12-20 02:30:05 +08:00
|
|
|
/* See comment at system_reset exception */
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_NORI(PACA_EXNMI, system_reset_common,
|
|
|
|
|
EXC_STD, NOTEST, 0x100)
|
2016-09-21 15:43:30 +08:00
|
|
|
#endif /* CONFIG_PPC_PSERIES */
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
|
2011-06-29 08:18:26 +08:00
|
|
|
/* This is moved out of line as it can be patched by FW, but
|
|
|
|
|
* some code path might still want to branch into the original
|
|
|
|
|
* vector
|
|
|
|
|
*/
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
SET_SCRATCH0(r13) /* save r13 */
|
|
|
|
|
EXCEPTION_PROLOG_0(PACA_EXMC)
|
powerpc/book3s: handle machine check in Linux host.
Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.
This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.
The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.
This is the code flow:
Machine Check Interrupt
|
V
0x200 vector ME=0, IR=0, DR=0
|
V
+-----------------------------------------------+
|machine_check_pSeries_early: | ME=0, IR=0, DR=0
| Alloc frame on emergency stack |
| Save srr1, srr0, dar and dsisr on stack |
+-----------------------------------------------+
|
(ME=1, IR=0, DR=0, RFID)
|
V
machine_check_handle_early ME=1, IR=0, DR=0
|
V
+-----------------------------------------------+
| machine_check_early (r3=pt_regs) | ME=1, IR=0, DR=0
| Things to do: (in next patches) |
| Flush SLB for SLB errors |
| Flush TLB for TLB errors |
| Decode and save MCE info |
+-----------------------------------------------+
|
(Fall through existing exception handler routine.)
|
V
machine_check_pSerie ME=1, IR=0, DR=0
|
(ME=1, IR=1, DR=1, RFID)
|
V
machine_check_common ME=1, IR=1, DR=1
.
.
.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:34:08 +08:00
|
|
|
BEGIN_FTR_SECTION
|
2016-03-01 13:47:46 +08:00
|
|
|
b machine_check_powernv_early
|
powerpc/book3s: handle machine check in Linux host.
Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.
This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.
The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.
This is the code flow:
Machine Check Interrupt
|
V
0x200 vector ME=0, IR=0, DR=0
|
V
+-----------------------------------------------+
|machine_check_pSeries_early: | ME=0, IR=0, DR=0
| Alloc frame on emergency stack |
| Save srr1, srr0, dar and dsisr on stack |
+-----------------------------------------------+
|
(ME=1, IR=0, DR=0, RFID)
|
V
machine_check_handle_early ME=1, IR=0, DR=0
|
V
+-----------------------------------------------+
| machine_check_early (r3=pt_regs) | ME=1, IR=0, DR=0
| Things to do: (in next patches) |
| Flush SLB for SLB errors |
| Flush TLB for TLB errors |
| Decode and save MCE info |
+-----------------------------------------------+
|
(Fall through existing exception handler routine.)
|
V
machine_check_pSerie ME=1, IR=0, DR=0
|
(ME=1, IR=1, DR=1, RFID)
|
V
machine_check_common ME=1, IR=1, DR=1
.
.
.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:34:08 +08:00
|
|
|
FTR_SECTION_ELSE
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
b machine_check_pSeries_0
|
powerpc/book3s: handle machine check in Linux host.
Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.
This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.
The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.
This is the code flow:
Machine Check Interrupt
|
V
0x200 vector ME=0, IR=0, DR=0
|
V
+-----------------------------------------------+
|machine_check_pSeries_early: | ME=0, IR=0, DR=0
| Alloc frame on emergency stack |
| Save srr1, srr0, dar and dsisr on stack |
+-----------------------------------------------+
|
(ME=1, IR=0, DR=0, RFID)
|
V
machine_check_handle_early ME=1, IR=0, DR=0
|
V
+-----------------------------------------------+
| machine_check_early (r3=pt_regs) | ME=1, IR=0, DR=0
| Things to do: (in next patches) |
| Flush SLB for SLB errors |
| Flush TLB for TLB errors |
| Decode and save MCE info |
+-----------------------------------------------+
|
(Fall through existing exception handler routine.)
|
V
machine_check_pSerie ME=1, IR=0, DR=0
|
(ME=1, IR=1, DR=1, RFID)
|
V
machine_check_common ME=1, IR=1, DR=1
.
.
.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:34:08 +08:00
|
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(machine_check, 0x200, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x4200, 0x100)
|
2016-09-21 15:43:31 +08:00
|
|
|
TRAMP_REAL_BEGIN(machine_check_powernv_early)
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200)
|
|
|
|
|
/*
|
|
|
|
|
* Register contents:
|
|
|
|
|
* R13 = PACA
|
|
|
|
|
* R9 = CR
|
|
|
|
|
* Original R9 to R13 is saved on PACA_EXMC
|
|
|
|
|
*
|
|
|
|
|
* Switch to mc_emergency stack and handle re-entrancy (we limit
|
|
|
|
|
* the nested MCE upto level 4 to avoid stack overflow).
|
|
|
|
|
* Save MCE registers srr1, srr0, dar and dsisr and then set ME=1
|
|
|
|
|
*
|
|
|
|
|
* We use paca->in_mce to check whether this is the first entry or
|
|
|
|
|
* nested machine check. We increment paca->in_mce to track nested
|
|
|
|
|
* machine checks.
|
|
|
|
|
*
|
|
|
|
|
* If this is the first entry then set stack pointer to
|
|
|
|
|
* paca->mc_emergency_sp, otherwise r1 is already pointing to
|
|
|
|
|
* stack frame on mc_emergency stack.
|
|
|
|
|
*
|
|
|
|
|
* NOTE: We are here with MSR_ME=0 (off), which means we risk a
|
|
|
|
|
* checkstop if we get another machine check exception before we do
|
|
|
|
|
* rfid with MSR_ME=1.
|
2017-04-19 21:05:47 +08:00
|
|
|
*
|
|
|
|
|
* This interrupt can wake directly from idle. If that is the case,
|
|
|
|
|
* the machine check is handled then the idle wakeup code is called
|
|
|
|
|
* to restore state. In that case, the POWER9 DD1 idle PACA workaround
|
|
|
|
|
* is not applied in the early machine check code, which will cause
|
|
|
|
|
* bugs.
|
2016-09-21 15:43:31 +08:00
|
|
|
*/
|
|
|
|
|
mr r11,r1 /* Save r1 */
|
|
|
|
|
lhz r10,PACA_IN_MCE(r13)
|
|
|
|
|
cmpwi r10,0 /* Are we in nested machine check */
|
|
|
|
|
bne 0f /* Yes, we are. */
|
|
|
|
|
/* First machine check entry */
|
|
|
|
|
ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */
|
|
|
|
|
0: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
|
|
|
|
|
addi r10,r10,1 /* increment paca->in_mce */
|
|
|
|
|
sth r10,PACA_IN_MCE(r13)
|
|
|
|
|
/* Limit nested MCE to level 4 to avoid stack overflow */
|
|
|
|
|
cmpwi r10,4
|
|
|
|
|
bgt 2f /* Check if we hit limit of 4 */
|
|
|
|
|
std r11,GPR1(r1) /* Save r1 on the stack. */
|
|
|
|
|
std r11,0(r1) /* make stack chain pointer */
|
|
|
|
|
mfspr r11,SPRN_SRR0 /* Save SRR0 */
|
|
|
|
|
std r11,_NIP(r1)
|
|
|
|
|
mfspr r11,SPRN_SRR1 /* Save SRR1 */
|
|
|
|
|
std r11,_MSR(r1)
|
|
|
|
|
mfspr r11,SPRN_DAR /* Save DAR */
|
|
|
|
|
std r11,_DAR(r1)
|
|
|
|
|
mfspr r11,SPRN_DSISR /* Save DSISR */
|
|
|
|
|
std r11,_DSISR(r1)
|
|
|
|
|
std r9,_CCR(r1) /* Save CR in stackframe */
|
|
|
|
|
/* Save r9 through r13 from EXMC save area to stack frame. */
|
|
|
|
|
EXCEPTION_PROLOG_COMMON_2(PACA_EXMC)
|
|
|
|
|
mfmsr r11 /* get MSR value */
|
|
|
|
|
ori r11,r11,MSR_ME /* turn on ME bit */
|
|
|
|
|
ori r11,r11,MSR_RI /* turn on RI bit */
|
|
|
|
|
LOAD_HANDLER(r12, machine_check_handle_early)
|
|
|
|
|
1: mtspr SPRN_SRR0,r12
|
|
|
|
|
mtspr SPRN_SRR1,r11
|
|
|
|
|
rfid
|
|
|
|
|
b . /* prevent speculative execution */
|
|
|
|
|
2:
|
|
|
|
|
/* Stack overflow. Stay on emergency stack and panic.
|
|
|
|
|
* Keep the ME bit off while panic-ing, so that if we hit
|
|
|
|
|
* another machine check we checkstop.
|
|
|
|
|
*/
|
|
|
|
|
addi r1,r1,INT_FRAME_SIZE /* go back to previous stack frame */
|
|
|
|
|
ld r11,PACAKMSR(r13)
|
|
|
|
|
LOAD_HANDLER(r12, unrecover_mce)
|
|
|
|
|
li r10,MSR_ME
|
|
|
|
|
andc r11,r11,r10 /* Turn off MSR_ME */
|
|
|
|
|
b 1b
|
|
|
|
|
b . /* prevent speculative execution */
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
|
|
|
|
|
|
|
|
|
|
TRAMP_REAL_BEGIN(machine_check_pSeries)
|
|
|
|
|
.globl machine_check_fwnmi
|
|
|
|
|
machine_check_fwnmi:
|
|
|
|
|
SET_SCRATCH0(r13) /* save r13 */
|
|
|
|
|
EXCEPTION_PROLOG_0(PACA_EXMC)
|
|
|
|
|
machine_check_pSeries_0:
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST_PR, 0x200)
|
|
|
|
|
/*
|
2016-12-20 02:30:02 +08:00
|
|
|
* MSR_RI is not enabled, because PACA_EXMC is being used, so a
|
|
|
|
|
* nested machine check corrupts it. machine_check_common enables
|
|
|
|
|
* MSR_RI.
|
2016-09-21 15:43:31 +08:00
|
|
|
*/
|
2016-12-20 02:30:02 +08:00
|
|
|
EXCEPTION_PROLOG_PSERIES_1_NORI(machine_check_common, EXC_STD)
|
2016-09-21 15:43:31 +08:00
|
|
|
|
|
|
|
|
TRAMP_KVM_SKIP(PACA_EXMC, 0x200)
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(machine_check_common)
|
|
|
|
|
/*
|
|
|
|
|
* Machine check is different because we use a different
|
|
|
|
|
* save area: PACA_EXMC instead of PACA_EXGEN.
|
|
|
|
|
*/
|
|
|
|
|
mfspr r10,SPRN_DAR
|
|
|
|
|
std r10,PACA_EXMC+EX_DAR(r13)
|
|
|
|
|
mfspr r10,SPRN_DSISR
|
|
|
|
|
stw r10,PACA_EXMC+EX_DSISR(r13)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
|
|
|
|
|
FINISH_NAP
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
ld r3,PACA_EXMC+EX_DAR(r13)
|
|
|
|
|
lwz r4,PACA_EXMC+EX_DSISR(r13)
|
|
|
|
|
/* Enable MSR_RI when finished with PACA_EXMC */
|
|
|
|
|
li r10,MSR_RI
|
|
|
|
|
mtmsrd r10,1
|
|
|
|
|
std r3,_DAR(r1)
|
|
|
|
|
std r4,_DSISR(r1)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl machine_check_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
|
|
|
|
#define MACHINE_CHECK_HANDLER_WINDUP \
|
|
|
|
|
/* Clear MSR_RI before setting SRR0 and SRR1. */\
|
|
|
|
|
li r0,MSR_RI; \
|
|
|
|
|
mfmsr r9; /* get MSR value */ \
|
|
|
|
|
andc r9,r9,r0; \
|
|
|
|
|
mtmsrd r9,1; /* Clear MSR_RI */ \
|
|
|
|
|
/* Move original SRR0 and SRR1 into the respective regs */ \
|
|
|
|
|
ld r9,_MSR(r1); \
|
|
|
|
|
mtspr SPRN_SRR1,r9; \
|
|
|
|
|
ld r3,_NIP(r1); \
|
|
|
|
|
mtspr SPRN_SRR0,r3; \
|
|
|
|
|
ld r9,_CTR(r1); \
|
|
|
|
|
mtctr r9; \
|
|
|
|
|
ld r9,_XER(r1); \
|
|
|
|
|
mtxer r9; \
|
|
|
|
|
ld r9,_LINK(r1); \
|
|
|
|
|
mtlr r9; \
|
|
|
|
|
REST_GPR(0, r1); \
|
|
|
|
|
REST_8GPRS(2, r1); \
|
|
|
|
|
REST_GPR(10, r1); \
|
|
|
|
|
ld r11,_CCR(r1); \
|
|
|
|
|
mtcr r11; \
|
|
|
|
|
/* Decrement paca->in_mce. */ \
|
|
|
|
|
lhz r12,PACA_IN_MCE(r13); \
|
|
|
|
|
subi r12,r12,1; \
|
|
|
|
|
sth r12,PACA_IN_MCE(r13); \
|
|
|
|
|
REST_GPR(11, r1); \
|
|
|
|
|
REST_2GPRS(12, r1); \
|
|
|
|
|
/* restore original r1. */ \
|
|
|
|
|
ld r1,GPR1(r1)
|
|
|
|
|
|
2017-04-19 21:05:47 +08:00
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
|
|
|
/*
|
|
|
|
|
* This is an idle wakeup. Low level machine check has already been
|
|
|
|
|
* done. Queue the event then call the idle code to do the wake up.
|
|
|
|
|
*/
|
|
|
|
|
EXC_COMMON_BEGIN(machine_check_idle_common)
|
|
|
|
|
bl machine_check_queue_event
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We have not used any non-volatile GPRs here, and as a rule
|
|
|
|
|
* most exception code including machine check does not.
|
|
|
|
|
* Therefore PACA_NAPSTATELOST does not need to be set. Idle
|
|
|
|
|
* wakeup will restore volatile registers.
|
|
|
|
|
*
|
|
|
|
|
* Load the original SRR1 into r3 for pnv_powersave_wakeup_mce.
|
|
|
|
|
*
|
|
|
|
|
* Then decrement MCE nesting after finishing with the stack.
|
|
|
|
|
*/
|
|
|
|
|
ld r3,_MSR(r1)
|
|
|
|
|
|
|
|
|
|
lhz r11,PACA_IN_MCE(r13)
|
|
|
|
|
subi r11,r11,1
|
|
|
|
|
sth r11,PACA_IN_MCE(r13)
|
|
|
|
|
|
|
|
|
|
/* Turn off the RI bit because SRR1 is used by idle wakeup code. */
|
|
|
|
|
/* Recoverability could be improved by reducing the use of SRR1. */
|
|
|
|
|
li r11,0
|
|
|
|
|
mtmsrd r11,1
|
|
|
|
|
|
|
|
|
|
b pnv_powersave_wakeup_mce
|
|
|
|
|
#endif
|
2016-09-21 15:43:31 +08:00
|
|
|
/*
|
|
|
|
|
* Handle machine check early in real mode. We come here with
|
|
|
|
|
* ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
|
|
|
|
|
*/
|
|
|
|
|
EXC_COMMON_BEGIN(machine_check_handle_early)
|
|
|
|
|
std r0,GPR0(r1) /* Save r0 */
|
|
|
|
|
EXCEPTION_PROLOG_COMMON_3(0x200)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl machine_check_early
|
|
|
|
|
std r3,RESULT(r1) /* Save result */
|
|
|
|
|
ld r12,_MSR(r1)
|
2017-04-19 21:05:47 +08:00
|
|
|
|
2016-09-21 15:43:31 +08:00
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
|
|
|
/*
|
|
|
|
|
* Check if thread was in power saving mode. We come here when any
|
|
|
|
|
* of the following is true:
|
|
|
|
|
* a. thread wasn't in power saving mode
|
|
|
|
|
* b. thread was in power saving mode with no state loss,
|
|
|
|
|
* supervisor state loss or hypervisor state loss.
|
|
|
|
|
*
|
|
|
|
|
* Go back to nap/sleep/winkle mode again if (b) is true.
|
|
|
|
|
*/
|
2017-04-19 21:05:47 +08:00
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
rlwinm. r11,r12,47-31,30,31
|
2017-05-04 18:41:12 +08:00
|
|
|
bne machine_check_idle_common
|
2017-04-19 21:05:47 +08:00
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
|
2016-09-21 15:43:31 +08:00
|
|
|
#endif
|
2017-04-19 21:05:47 +08:00
|
|
|
|
2016-09-21 15:43:31 +08:00
|
|
|
/*
|
|
|
|
|
* Check if we are coming from hypervisor userspace. If yes then we
|
|
|
|
|
* continue in host kernel in V mode to deliver the MC event.
|
|
|
|
|
*/
|
|
|
|
|
rldicl. r11,r12,4,63 /* See if MC hit while in HV mode. */
|
|
|
|
|
beq 5f
|
|
|
|
|
andi. r11,r12,MSR_PR /* See if coming from user. */
|
|
|
|
|
bne 9f /* continue in V mode if we are. */
|
|
|
|
|
|
|
|
|
|
5:
|
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
|
|
|
/*
|
|
|
|
|
* We are coming from kernel context. Check if we are coming from
|
|
|
|
|
* guest. if yes, then we can continue. We will fall through
|
|
|
|
|
* do_kvm_200->kvmppc_interrupt to deliver the MC event to guest.
|
|
|
|
|
*/
|
|
|
|
|
lbz r11,HSTATE_IN_GUEST(r13)
|
|
|
|
|
cmpwi r11,0 /* Check if coming from guest */
|
|
|
|
|
bne 9f /* continue if we are. */
|
|
|
|
|
#endif
|
|
|
|
|
/*
|
|
|
|
|
* At this point we are not sure about what context we come from.
|
|
|
|
|
* Queue up the MCE event and return from the interrupt.
|
|
|
|
|
* But before that, check if this is an un-recoverable exception.
|
|
|
|
|
* If yes, then stay on emergency stack and panic.
|
|
|
|
|
*/
|
|
|
|
|
andi. r11,r12,MSR_RI
|
|
|
|
|
bne 2f
|
|
|
|
|
1: mfspr r11,SPRN_SRR0
|
|
|
|
|
LOAD_HANDLER(r10,unrecover_mce)
|
|
|
|
|
mtspr SPRN_SRR0,r10
|
|
|
|
|
ld r10,PACAKMSR(r13)
|
|
|
|
|
/*
|
|
|
|
|
* We are going down. But there are chances that we might get hit by
|
|
|
|
|
* another MCE during panic path and we may run into unstable state
|
|
|
|
|
* with no way out. Hence, turn ME bit off while going down, so that
|
|
|
|
|
* when another MCE is hit during panic path, system will checkstop
|
|
|
|
|
* and hypervisor will get restarted cleanly by SP.
|
|
|
|
|
*/
|
|
|
|
|
li r3,MSR_ME
|
|
|
|
|
andc r10,r10,r3 /* Turn off MSR_ME */
|
|
|
|
|
mtspr SPRN_SRR1,r10
|
|
|
|
|
rfid
|
|
|
|
|
b .
|
|
|
|
|
2:
|
|
|
|
|
/*
|
|
|
|
|
* Check if we have successfully handled/recovered from error, if not
|
|
|
|
|
* then stay on emergency stack and panic.
|
|
|
|
|
*/
|
|
|
|
|
ld r3,RESULT(r1) /* Load result */
|
|
|
|
|
cmpdi r3,0 /* see if we handled MCE successfully */
|
|
|
|
|
|
|
|
|
|
beq 1b /* if !handled then panic */
|
|
|
|
|
/*
|
|
|
|
|
* Return from MC interrupt.
|
|
|
|
|
* Queue up the MCE event so that we can log it later, while
|
|
|
|
|
* returning from kernel or opal call.
|
|
|
|
|
*/
|
|
|
|
|
bl machine_check_queue_event
|
|
|
|
|
MACHINE_CHECK_HANDLER_WINDUP
|
|
|
|
|
rfid
|
|
|
|
|
9:
|
|
|
|
|
/* Deliver the machine check to host kernel in V mode. */
|
|
|
|
|
MACHINE_CHECK_HANDLER_WINDUP
|
|
|
|
|
b machine_check_pSeries
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(unrecover_mce)
|
|
|
|
|
/* Invoke machine_check_exception to print MCE event and panic. */
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl machine_check_exception
|
|
|
|
|
/*
|
|
|
|
|
* We will not reach here. Even if we did, there is no way out. Call
|
|
|
|
|
* unrecoverable_exception and die.
|
|
|
|
|
*/
|
|
|
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl unrecoverable_exception
|
|
|
|
|
b 1b
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(data_access, 0x300, 0x80)
|
|
|
|
|
EXC_VIRT(data_access, 0x4300, 0x80, 0x300)
|
2016-09-21 15:43:32 +08:00
|
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x300)
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(data_access_common)
|
|
|
|
|
/*
|
|
|
|
|
* Here r13 points to the paca, r9 contains the saved CR,
|
|
|
|
|
* SRR0 and SRR1 are saved in r11 and r12,
|
|
|
|
|
* r9 - r13 are saved in paca->exgen.
|
|
|
|
|
*/
|
|
|
|
|
mfspr r10,SPRN_DAR
|
|
|
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
|
|
|
mfspr r10,SPRN_DSISR
|
|
|
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
ld r12,_MSR(r1)
|
|
|
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
|
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
|
|
|
li r5,0x300
|
|
|
|
|
std r3,_DAR(r1)
|
|
|
|
|
std r4,_DSISR(r1)
|
|
|
|
|
BEGIN_MMU_FTR_SECTION
|
|
|
|
|
b do_hash_page /* Try to handle as hpte fault */
|
|
|
|
|
MMU_FTR_SECTION_ELSE
|
|
|
|
|
b handle_page_fault
|
|
|
|
|
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
|
2011-04-05 11:59:58 +08:00
|
|
|
SET_SCRATCH0(r13)
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
2016-09-30 17:43:18 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r12,r3 /* save r3 */
|
2009-06-03 05:17:38 +08:00
|
|
|
mfspr r3,SPRN_DAR
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r11,SPRN_SRR1
|
powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-02 19:49:21 +08:00
|
|
|
crset 4*cr6+eq
|
2017-06-19 19:52:03 +08:00
|
|
|
BRANCH_TO_COMMON(r10, slb_miss_common)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(data_access_slb, 0x380, 0x80)
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80)
|
2016-09-21 15:43:33 +08:00
|
|
|
SET_SCRATCH0(r13)
|
|
|
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r12,r3 /* save r3 */
|
2016-09-21 15:43:33 +08:00
|
|
|
mfspr r3,SPRN_DAR
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r11,SPRN_SRR1
|
2016-09-21 15:43:33 +08:00
|
|
|
crset 4*cr6+eq
|
2017-06-19 19:52:03 +08:00
|
|
|
BRANCH_TO_COMMON(r10, slb_miss_common)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_END(data_access_slb, 0x4380, 0x80)
|
2016-09-21 15:43:33 +08:00
|
|
|
TRAMP_KVM_SKIP(PACA_EXSLB, 0x380)
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(instruction_access, 0x400, 0x80)
|
|
|
|
|
EXC_VIRT(instruction_access, 0x4400, 0x80, 0x400)
|
2016-09-21 15:43:34 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x400)
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(instruction_access_common)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
ld r12,_MSR(r1)
|
|
|
|
|
ld r3,_NIP(r1)
|
2017-07-19 12:49:28 +08:00
|
|
|
andis. r4,r12,DSISR_BAD_FAULT_64S@h
|
2016-09-21 15:43:34 +08:00
|
|
|
li r5,0x400
|
|
|
|
|
std r3,_DAR(r1)
|
|
|
|
|
std r4,_DSISR(r1)
|
|
|
|
|
BEGIN_MMU_FTR_SECTION
|
|
|
|
|
b do_hash_page /* Try to handle as hpte fault */
|
|
|
|
|
MMU_FTR_SECTION_ELSE
|
|
|
|
|
b handle_page_fault
|
|
|
|
|
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
|
2011-04-05 11:59:58 +08:00
|
|
|
SET_SCRATCH0(r13)
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
2016-09-30 17:43:18 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r12,r3 /* save r3 */
|
2009-06-03 05:17:38 +08:00
|
|
|
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r11,SPRN_SRR1
|
powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-02 19:49:21 +08:00
|
|
|
crclr 4*cr6+eq
|
2017-06-19 19:52:03 +08:00
|
|
|
BRANCH_TO_COMMON(r10, slb_miss_common)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(instruction_access_slb, 0x480, 0x80)
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80)
|
2016-09-21 15:43:35 +08:00
|
|
|
SET_SCRATCH0(r13)
|
|
|
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r12,r3 /* save r3 */
|
2016-09-21 15:43:35 +08:00
|
|
|
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r11,SPRN_SRR1
|
2016-09-21 15:43:35 +08:00
|
|
|
crclr 4*cr6+eq
|
2017-06-19 19:52:03 +08:00
|
|
|
BRANCH_TO_COMMON(r10, slb_miss_common)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80)
|
2016-09-21 15:43:35 +08:00
|
|
|
TRAMP_KVM(PACA_EXSLB, 0x480)
|
|
|
|
|
|
|
|
|
|
|
2017-06-19 19:52:03 +08:00
|
|
|
/*
|
|
|
|
|
* This handler is used by the 0x380 and 0x480 SLB miss interrupts, as well as
|
|
|
|
|
* the virtual mode 0x4380 and 0x4480 interrupts if AIL is enabled.
|
|
|
|
|
*/
|
|
|
|
|
EXC_COMMON_BEGIN(slb_miss_common)
|
2016-09-21 15:43:35 +08:00
|
|
|
/*
|
|
|
|
|
* r13 points to the PACA, r9 contains the saved CR,
|
2017-05-21 21:15:45 +08:00
|
|
|
* r12 contains the saved r3,
|
|
|
|
|
* r11 contain the saved SRR1, SRR0 is still ready for return
|
2016-09-21 15:43:35 +08:00
|
|
|
* r3 has the faulting address
|
|
|
|
|
* r9 - r13 are saved in paca->exslb.
|
|
|
|
|
* cr6.eq is set for a D-SLB miss, clear for a I-SLB miss
|
|
|
|
|
* We assume we aren't going to take any exceptions during this
|
|
|
|
|
* procedure.
|
|
|
|
|
*/
|
|
|
|
|
mflr r10
|
|
|
|
|
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
|
|
|
|
|
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
|
|
|
|
|
|
2017-05-21 21:15:45 +08:00
|
|
|
/*
|
|
|
|
|
* Test MSR_RI before calling slb_allocate_realmode, because the
|
|
|
|
|
* MSR in r11 gets clobbered. However we still want to allocate
|
|
|
|
|
* SLB in case MSR_RI=0, to minimise the risk of getting stuck in
|
|
|
|
|
* recursive SLB faults. So use cr5 for this, which is preserved.
|
|
|
|
|
*/
|
|
|
|
|
andi. r11,r11,MSR_RI /* check for unrecoverable exception */
|
|
|
|
|
cmpdi cr5,r11,MSR_RI
|
|
|
|
|
|
2016-09-21 15:43:35 +08:00
|
|
|
crset 4*cr0+eq
|
|
|
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
|
|
|
|
BEGIN_MMU_FTR_SECTION
|
2017-06-19 19:57:33 +08:00
|
|
|
bl slb_allocate
|
2016-09-21 15:43:35 +08:00
|
|
|
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
ld r10,PACA_EXSLB+EX_LR(r13)
|
|
|
|
|
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
|
|
|
|
|
mtlr r10
|
|
|
|
|
|
2017-05-21 21:15:43 +08:00
|
|
|
beq- 8f /* if bad address, make full stack frame */
|
2016-09-21 15:43:35 +08:00
|
|
|
|
2017-05-21 21:15:45 +08:00
|
|
|
bne- cr5,2f /* if unrecoverable exception, oops */
|
2016-09-21 15:43:35 +08:00
|
|
|
|
|
|
|
|
/* All done -- return from exception. */
|
|
|
|
|
|
|
|
|
|
.machine push
|
|
|
|
|
.machine "power4"
|
|
|
|
|
mtcrf 0x80,r9
|
2017-05-21 21:15:45 +08:00
|
|
|
mtcrf 0x04,r9 /* MSR[RI] indication is in cr5 */
|
2016-09-21 15:43:35 +08:00
|
|
|
mtcrf 0x02,r9 /* I/D indication is in cr6 */
|
|
|
|
|
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
|
|
|
|
|
.machine pop
|
|
|
|
|
|
2017-05-21 21:15:44 +08:00
|
|
|
RESTORE_CTR(r9, PACA_EXSLB)
|
2016-09-21 15:43:35 +08:00
|
|
|
RESTORE_PPR_PACA(PACA_EXSLB, r9)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r3,r12
|
2016-09-21 15:43:35 +08:00
|
|
|
ld r9,PACA_EXSLB+EX_R9(r13)
|
|
|
|
|
ld r10,PACA_EXSLB+EX_R10(r13)
|
|
|
|
|
ld r11,PACA_EXSLB+EX_R11(r13)
|
|
|
|
|
ld r12,PACA_EXSLB+EX_R12(r13)
|
|
|
|
|
ld r13,PACA_EXSLB+EX_R13(r13)
|
|
|
|
|
rfid
|
|
|
|
|
b . /* prevent speculative execution */
|
|
|
|
|
|
2017-05-21 21:15:43 +08:00
|
|
|
2: std r3,PACA_EXSLB+EX_DAR(r13)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r3,r12
|
2017-05-21 21:15:43 +08:00
|
|
|
mfspr r11,SPRN_SRR0
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r12,SPRN_SRR1
|
2016-09-21 15:43:35 +08:00
|
|
|
LOAD_HANDLER(r10,unrecov_slb)
|
|
|
|
|
mtspr SPRN_SRR0,r10
|
|
|
|
|
ld r10,PACAKMSR(r13)
|
|
|
|
|
mtspr SPRN_SRR1,r10
|
|
|
|
|
rfid
|
|
|
|
|
b .
|
|
|
|
|
|
2017-05-21 21:15:43 +08:00
|
|
|
8: std r3,PACA_EXSLB+EX_DAR(r13)
|
2017-05-21 21:15:45 +08:00
|
|
|
mr r3,r12
|
2017-05-21 21:15:43 +08:00
|
|
|
mfspr r11,SPRN_SRR0
|
2017-05-21 21:15:45 +08:00
|
|
|
mfspr r12,SPRN_SRR1
|
2016-09-21 15:43:35 +08:00
|
|
|
LOAD_HANDLER(r10,bad_addr_slb)
|
|
|
|
|
mtspr SPRN_SRR0,r10
|
|
|
|
|
ld r10,PACAKMSR(r13)
|
|
|
|
|
mtspr SPRN_SRR1,r10
|
|
|
|
|
rfid
|
|
|
|
|
b .
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(unrecov_slb)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl unrecoverable_exception
|
|
|
|
|
b 1b
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_BEGIN(bad_addr_slb)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB)
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
ld r3, PACA_EXSLB+EX_DAR(r13)
|
|
|
|
|
std r3, _DAR(r1)
|
|
|
|
|
beq cr6, 2f
|
|
|
|
|
li r10, 0x480 /* fix trap number for I-SLB miss */
|
|
|
|
|
std r10, _TRAP(r1)
|
|
|
|
|
2: bl save_nvgprs
|
|
|
|
|
addi r3, r1, STACK_FRAME_OVERHEAD
|
|
|
|
|
bl slb_miss_bad_addr
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100)
|
2011-04-05 12:27:11 +08:00
|
|
|
.globl hardware_interrupt_hv;
|
|
|
|
|
hardware_interrupt_hv:
|
2011-04-05 12:20:31 +08:00
|
|
|
BEGIN_FTR_SECTION
|
2016-09-30 17:43:18 +08:00
|
|
|
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
|
2011-06-29 08:18:26 +08:00
|
|
|
EXC_HV, SOFTEN_TEST_HV)
|
KVM: PPC: Add support for Book3S processors in hypervisor mode
This adds support for KVM running on 64-bit Book 3S processors,
specifically POWER7, in hypervisor mode. Using hypervisor mode means
that the guest can use the processor's supervisor mode. That means
that the guest can execute privileged instructions and access privileged
registers itself without trapping to the host. This gives excellent
performance, but does mean that KVM cannot emulate a processor
architecture other than the one that the hardware implements.
This code assumes that the guest is running paravirtualized using the
PAPR (Power Architecture Platform Requirements) interface, which is the
interface that IBM's PowerVM hypervisor uses. That means that existing
Linux distributions that run on IBM pSeries machines will also run
under KVM without modification. In order to communicate the PAPR
hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code
to include/linux/kvm.h.
Currently the choice between book3s_hv support and book3s_pr support
(i.e. the existing code, which runs the guest in user mode) has to be
made at kernel configuration time, so a given kernel binary can only
do one or the other.
This new book3s_hv code doesn't support MMIO emulation at present.
Since we are running paravirtualized guests, this isn't a serious
restriction.
With the guest running in supervisor mode, most exceptions go straight
to the guest. We will never get data or instruction storage or segment
interrupts, alignment interrupts, decrementer interrupts, program
interrupts, single-step interrupts, etc., coming to the hypervisor from
the guest. Therefore this introduces a new KVMTEST_NONHV macro for the
exception entry path so that we don't have to do the KVM test on entry
to those exception handlers.
We do however get hypervisor decrementer, hypervisor data storage,
hypervisor instruction storage, and hypervisor emulation assist
interrupts, so we have to handle those.
In hypervisor mode, real-mode accesses can access all of RAM, not just
a limited amount. Therefore we put all the guest state in the vcpu.arch
and use the shadow_vcpu in the PACA only for temporary scratch space.
We allocate the vcpu with kzalloc rather than vzalloc, and we don't use
anything in the kvmppc_vcpu_book3s struct, so we don't allocate it.
We don't have a shared page with the guest, but we still need a
kvm_vcpu_arch_shared struct to store the values of various registers,
so we include one in the vcpu_arch struct.
The POWER7 processor has a restriction that all threads in a core have
to be in the same partition. MMU-on kernel code counts as a partition
(partition 0), so we have to do a partition switch on every entry to and
exit from the guest. At present we require the host and guest to run
in single-thread mode because of this hardware restriction.
This code allocates a hashed page table for the guest and initializes
it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We
require that the guest memory is allocated using 16MB huge pages, in
order to simplify the low-level memory management. This also means that
we can get away without tracking paging activity in the host for now,
since huge pages can't be paged or swapped.
This also adds a few new exports needed by the book3s_hv code.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:21:34 +08:00
|
|
|
FTR_SECTION_ELSE
|
2016-09-30 17:43:18 +08:00
|
|
|
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
|
powerpc/64: Include KVM guest test in all interrupt vectors
Currently, if HV KVM is configured but PR KVM isn't, we don't include
a test to see whether we were interrupted in KVM guest context for the
set of interrupts which get delivered directly to the guest by hardware
if they occur in the guest. This includes things like program
interrupts.
However, the recent bug where userspace could set the MSR for a VCPU
to have an illegal value in the TS field, and thus cause a TM Bad Thing
type of program interrupt on the hrfid that enters the guest, showed that
we can never be completely sure that these interrupts can never occur
in the guest entry/exit code. If one of these interrupts does happen
and we have HV KVM configured but not PR KVM, then we end up trying to
run the handler in the host with the MMU set to the guest MMU context,
which generally ends badly.
Thus, for robustness it is better to have the test in every interrupt
vector, so that if some way is found to trigger some interrupt in the
guest entry/exit path, we can handle it without immediately crashing
the host.
This means that the distinction between KVMTEST and KVMTEST_PR goes
away. Thus we delete KVMTEST_PR and associated macros and use KVMTEST
everywhere that we previously used either KVMTEST_PR or KVMTEST. It
also means that SOFTEN_TEST_HV_201 becomes the same as SOFTEN_TEST_PR,
so we deleted SOFTEN_TEST_HV_201 and use SOFTEN_TEST_PR instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-12 13:44:42 +08:00
|
|
|
EXC_STD, SOFTEN_TEST_PR)
|
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits
This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to
indicate that we have a usable hypervisor mode, and another to indicate
that the processor conforms to PowerISA version 2.06. We also add
another bit to indicate that the processor conforms to ISA version 2.01
and set that for PPC970 and derivatives.
Some PPC970 chips (specifically those in Apple machines) have a
hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode
is not useful in the sense that there is no way to run any code in
supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1
bits in HID4 are always 0, and we use that as a way of detecting that
hypervisor mode is not useful.
Where we have a feature section in assembly code around code that
only applies on POWER7 in hypervisor mode, we use a construct like
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
The definition of END_FTR_SECTION_IFSET is such that the code will
be enabled (not overwritten with nops) only if all bits in the
provided mask are set.
Note that the CPU feature check in __tlbie() only needs to check the
ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called
if we are running bare-metal, i.e. in hypervisor mode.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
|
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(hardware_interrupt, 0x500, 0x100)
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
|
2016-09-21 15:43:36 +08:00
|
|
|
.globl hardware_interrupt_relon_hv;
|
|
|
|
|
hardware_interrupt_relon_hv:
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_HV, SOFTEN_TEST_HV)
|
|
|
|
|
FTR_SECTION_ELSE
|
|
|
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_STD, SOFTEN_TEST_PR)
|
|
|
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
|
2016-09-21 15:43:36 +08:00
|
|
|
|
2016-12-22 02:29:26 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x500)
|
|
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0x500)
|
2016-09-21 15:43:36 +08:00
|
|
|
EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(alignment, 0x600, 0x100)
|
|
|
|
|
EXC_VIRT(alignment, 0x4600, 0x100, 0x600)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x600)
|
2016-09-21 15:43:37 +08:00
|
|
|
EXC_COMMON_BEGIN(alignment_common)
|
|
|
|
|
mfspr r10,SPRN_DAR
|
|
|
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
|
|
|
mfspr r10,SPRN_DSISR
|
|
|
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
|
|
|
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
|
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
|
|
|
std r3,_DAR(r1)
|
|
|
|
|
std r4,_DSISR(r1)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl alignment_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(program_check, 0x700, 0x100)
|
|
|
|
|
EXC_VIRT(program_check, 0x4700, 0x100, 0x700)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x700)
|
2016-09-21 15:43:38 +08:00
|
|
|
EXC_COMMON_BEGIN(program_check_common)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl program_check_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(fp_unavailable, 0x800, 0x100)
|
|
|
|
|
EXC_VIRT(fp_unavailable, 0x4800, 0x100, 0x800)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x800)
|
2016-09-21 15:43:39 +08:00
|
|
|
EXC_COMMON_BEGIN(fp_unavailable_common)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
|
|
|
|
|
bne 1f /* if from user, just load it up */
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl kernel_fp_unavailable_exception
|
|
|
|
|
BUG_OPCODE
|
|
|
|
|
1:
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
|
|
|
* transaction), go do TM stuff
|
|
|
|
|
*/
|
|
|
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
|
|
|
bne- 2f
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_TM)
|
|
|
|
|
#endif
|
|
|
|
|
bl load_up_fpu
|
|
|
|
|
b fast_exception_return
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
2: /* User process was in a transaction */
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl fp_unavailable_tm
|
|
|
|
|
b ret_from_except
|
|
|
|
|
#endif
|
|
|
|
|
|
2011-04-05 12:20:31 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_MASKABLE(decrementer, 0x900, 0x80)
|
|
|
|
|
EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x80, 0x900)
|
2016-09-21 15:43:40 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x900)
|
|
|
|
|
EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
|
|
|
|
|
|
powerpc: Fix "attempt to move .org backwards" error
Building a 64-bit powerpc kernel with PR KVM enabled currently gives
this error:
AS arch/powerpc/kernel/head_64.o
arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
arch/powerpc/kernel/exceptions-64s.S:258: Error: attempt to move .org backwards
make[2]: *** [arch/powerpc/kernel/head_64.o] Error 1
This happens because the MASKABLE_EXCEPTION_PSERIES macro turns into
33 instructions, but we only have space for 32 at the decrementer
interrupt vector (from 0x900 to 0x980).
In the code generated by the MASKABLE_EXCEPTION_PSERIES macro, we
currently have two instances of the HMT_MEDIUM macro, which has the
effect of setting the SMT thread priority to medium. One is the
first instruction, and is overwritten by a no-op on processors where
we save the PPR (processor priority register), that is, POWER7 or
later. The other is after we have saved the PPR.
In order to reduce the code at 0x900 by one instruction, we omit the
first HMT_MEDIUM. On processors without SMT this will have no effect
since HMT_MEDIUM is a no-op there. On POWER5 and RS64 machines this
will mean that the first few instructions take a little longer in the
case where a decrementer interrupt occurs when the hardware thread is
running at low SMT priority. On POWER6 and later machines, the
hardware automatically boosts the thread priority when a decrementer
interrupt is taken if the thread priority was below medium, so this
change won't make any difference.
The alternative would be to branch out of line after saving the CFAR.
However, that would incur an extra overhead on all processors, whereas
the approach adopted here only adds overhead on older threaded processors.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 01:51:40 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_HV(hdecrementer, 0x980, 0x80)
|
|
|
|
|
EXC_VIRT_HV(hdecrementer, 0x4980, 0x80, 0x980)
|
2016-09-21 15:43:41 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0x980)
|
|
|
|
|
EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
|
|
|
|
|
|
2011-04-05 12:20:31 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_MASKABLE(doorbell_super, 0xa00, 0x100)
|
|
|
|
|
EXC_VIRT_MASKABLE(doorbell_super, 0x4a00, 0x100, 0xa00)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xa00)
|
2016-09-21 15:43:42 +08:00
|
|
|
#ifdef CONFIG_PPC_DOORBELL
|
|
|
|
|
EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
|
|
|
|
|
#else
|
|
|
|
|
EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
|
|
|
|
|
#endif
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(trap_0b, 0xb00, 0x100)
|
|
|
|
|
EXC_VIRT(trap_0b, 0x4b00, 0x100, 0xb00)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xb00)
|
2016-09-21 15:43:43 +08:00
|
|
|
EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
|
|
|
|
|
|
2017-06-08 23:35:04 +08:00
|
|
|
/*
|
|
|
|
|
* system call / hypercall (0xc00, 0x4c00)
|
|
|
|
|
*
|
|
|
|
|
* The system call exception is invoked with "sc 0" and does not alter HV bit.
|
|
|
|
|
* There is support for kernel code to invoke system calls but there are no
|
|
|
|
|
* in-tree users.
|
|
|
|
|
*
|
|
|
|
|
* The hypercall is invoked with "sc 1" and sets HV=1.
|
|
|
|
|
*
|
|
|
|
|
* In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to
|
|
|
|
|
* 0x4c00 virtual mode.
|
|
|
|
|
*
|
|
|
|
|
* Call convention:
|
|
|
|
|
*
|
|
|
|
|
* syscall register convention is in Documentation/powerpc/syscall64-abi.txt
|
|
|
|
|
*
|
|
|
|
|
* For hypercalls, the register convention is as follows:
|
|
|
|
|
* r0 volatile
|
|
|
|
|
* r1-2 nonvolatile
|
|
|
|
|
* r3 volatile parameter and return value for status
|
|
|
|
|
* r4-r10 volatile input and output value
|
|
|
|
|
* r11 volatile hypercall number and output value
|
2017-07-18 13:32:44 +08:00
|
|
|
* r12 volatile input and output value
|
2017-06-08 23:35:04 +08:00
|
|
|
* r13-r31 nonvolatile
|
|
|
|
|
* LR nonvolatile
|
|
|
|
|
* CTR volatile
|
|
|
|
|
* XER volatile
|
|
|
|
|
* CR0-1 CR5-7 volatile
|
|
|
|
|
* CR2-4 nonvolatile
|
|
|
|
|
* Other registers nonvolatile
|
|
|
|
|
*
|
|
|
|
|
* The intersection of volatile registers that don't contain possible
|
2017-07-18 13:32:44 +08:00
|
|
|
* inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
|
|
|
|
|
* without saving, though xer is not a good idea to use, as hardware may
|
|
|
|
|
* interpret some bits so it may be costly to change them.
|
2017-06-08 23:35:04 +08:00
|
|
|
*/
|
2017-01-30 18:21:40 +08:00
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
2017-06-08 23:35:04 +08:00
|
|
|
/*
|
|
|
|
|
* There is a little bit of juggling to get syscall and hcall
|
2017-07-18 13:32:44 +08:00
|
|
|
* working well. Save r13 in ctr to avoid using SPRG scratch
|
|
|
|
|
* register.
|
2017-06-08 23:35:04 +08:00
|
|
|
*
|
|
|
|
|
* Userspace syscalls have already saved the PPR, hcalls must save
|
|
|
|
|
* it before setting HMT_MEDIUM.
|
|
|
|
|
*/
|
2017-01-30 18:21:40 +08:00
|
|
|
#define SYSCALL_KVMTEST \
|
2017-07-18 13:32:44 +08:00
|
|
|
mtctr r13; \
|
2017-01-30 18:21:40 +08:00
|
|
|
GET_PACA(r13); \
|
2017-07-18 13:32:44 +08:00
|
|
|
std r10,PACA_EXGEN+EX_R10(r13); \
|
2017-06-08 23:35:04 +08:00
|
|
|
KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
|
2017-01-30 18:21:40 +08:00
|
|
|
HMT_MEDIUM; \
|
2017-07-18 13:32:44 +08:00
|
|
|
mfctr r9;
|
2017-01-30 18:21:40 +08:00
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
#define SYSCALL_KVMTEST \
|
2017-06-08 23:35:04 +08:00
|
|
|
HMT_MEDIUM; \
|
|
|
|
|
mr r9,r13; \
|
|
|
|
|
GET_PACA(r13);
|
2017-01-30 18:21:40 +08:00
|
|
|
#endif
|
|
|
|
|
|
2016-10-13 10:17:14 +08:00
|
|
|
#define LOAD_SYSCALL_HANDLER(reg) \
|
|
|
|
|
__LOAD_HANDLER(reg, system_call_common)
|
2016-09-21 15:43:44 +08:00
|
|
|
|
2017-06-08 23:35:04 +08:00
|
|
|
#define SYSCALL_FASTENDIAN_TEST \
|
2016-09-21 15:43:44 +08:00
|
|
|
BEGIN_FTR_SECTION \
|
|
|
|
|
cmpdi r0,0x1ebe ; \
|
|
|
|
|
beq- 1f ; \
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
|
|
|
|
|
|
2017-06-08 23:35:04 +08:00
|
|
|
/*
|
|
|
|
|
* After SYSCALL_KVMTEST, we reach here with PACA in r13, r13 in r9,
|
|
|
|
|
* and HMT_MEDIUM.
|
|
|
|
|
*/
|
|
|
|
|
#define SYSCALL_REAL \
|
|
|
|
|
mfspr r11,SPRN_SRR0 ; \
|
2016-09-21 15:43:44 +08:00
|
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
|
|
|
LOAD_SYSCALL_HANDLER(r10) ; \
|
|
|
|
|
mtspr SPRN_SRR0,r10 ; \
|
|
|
|
|
ld r10,PACAKMSR(r13) ; \
|
|
|
|
|
mtspr SPRN_SRR1,r10 ; \
|
|
|
|
|
rfid ; \
|
|
|
|
|
b . ; /* prevent speculative execution */
|
|
|
|
|
|
2017-06-08 23:35:04 +08:00
|
|
|
#define SYSCALL_FASTENDIAN \
|
2016-09-21 15:43:44 +08:00
|
|
|
/* Fast LE/BE switch system call */ \
|
|
|
|
|
1: mfspr r12,SPRN_SRR1 ; \
|
|
|
|
|
xori r12,r12,MSR_LE ; \
|
|
|
|
|
mtspr SPRN_SRR1,r12 ; \
|
2017-06-08 23:35:04 +08:00
|
|
|
mr r13,r9 ; \
|
2016-09-21 15:43:44 +08:00
|
|
|
rfid ; /* return to userspace */ \
|
|
|
|
|
b . ; /* prevent speculative execution */
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_RELOCATABLE)
|
|
|
|
|
/*
|
|
|
|
|
* We can't branch directly so we do it via the CTR which
|
|
|
|
|
* is volatile across system calls.
|
|
|
|
|
*/
|
2017-06-08 23:35:04 +08:00
|
|
|
#define SYSCALL_VIRT \
|
|
|
|
|
LOAD_SYSCALL_HANDLER(r10) ; \
|
|
|
|
|
mtctr r10 ; \
|
|
|
|
|
mfspr r11,SPRN_SRR0 ; \
|
2016-09-21 15:43:44 +08:00
|
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
|
|
|
li r10,MSR_RI ; \
|
|
|
|
|
mtmsrd r10,1 ; \
|
|
|
|
|
bctr ;
|
|
|
|
|
#else
|
|
|
|
|
/* We can branch directly */
|
2017-06-08 23:35:04 +08:00
|
|
|
#define SYSCALL_VIRT \
|
|
|
|
|
mfspr r11,SPRN_SRR0 ; \
|
2016-09-21 15:43:44 +08:00
|
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
|
|
|
li r10,MSR_RI ; \
|
|
|
|
|
mtmsrd r10,1 ; /* Set RI (EE=0) */ \
|
|
|
|
|
b system_call_common ;
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(system_call, 0xc00, 0x100)
|
2017-06-08 23:35:04 +08:00
|
|
|
SYSCALL_KVMTEST /* loads PACA into r13, and saves r13 to r9 */
|
|
|
|
|
SYSCALL_FASTENDIAN_TEST
|
|
|
|
|
SYSCALL_REAL
|
|
|
|
|
SYSCALL_FASTENDIAN
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(system_call, 0xc00, 0x100)
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100)
|
2017-06-08 23:35:04 +08:00
|
|
|
SYSCALL_KVMTEST /* loads PACA into r13, and saves r13 to r9 */
|
|
|
|
|
SYSCALL_FASTENDIAN_TEST
|
|
|
|
|
SYSCALL_VIRT
|
|
|
|
|
SYSCALL_FASTENDIAN
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_END(system_call, 0x4c00, 0x100)
|
2016-09-21 15:43:44 +08:00
|
|
|
|
2017-06-08 23:35:04 +08:00
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
|
|
|
/*
|
|
|
|
|
* This is a hcall, so register convention is as above, with these
|
|
|
|
|
* differences:
|
|
|
|
|
* r13 = PACA
|
2017-07-18 13:32:44 +08:00
|
|
|
* ctr = orig r13
|
|
|
|
|
* orig r10 saved in PACA
|
2017-06-08 23:35:04 +08:00
|
|
|
*/
|
|
|
|
|
TRAMP_KVM_BEGIN(do_kvm_0xc00)
|
|
|
|
|
/*
|
|
|
|
|
* Save the PPR (on systems that support it) before changing to
|
|
|
|
|
* HMT_MEDIUM. That allows the KVM code to save that value into the
|
|
|
|
|
* guest state (it is the guest's PPR value).
|
|
|
|
|
*/
|
2017-07-18 13:32:44 +08:00
|
|
|
OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
|
2017-06-08 23:35:04 +08:00
|
|
|
HMT_MEDIUM
|
2017-07-18 13:32:44 +08:00
|
|
|
OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
|
2017-06-08 23:35:04 +08:00
|
|
|
mfctr r10
|
2017-07-18 13:32:44 +08:00
|
|
|
SET_SCRATCH0(r10)
|
2017-06-08 23:35:04 +08:00
|
|
|
std r9,PACA_EXGEN+EX_R9(r13)
|
|
|
|
|
mfcr r9
|
|
|
|
|
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
|
|
|
|
|
#endif
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-09-21 15:43:44 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(single_step, 0xd00, 0x100)
|
|
|
|
|
EXC_VIRT(single_step, 0x4d00, 0x100, 0xd00)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xd00)
|
2016-09-21 15:43:45 +08:00
|
|
|
EXC_COMMON(single_step_common, 0xd00, single_step_exception)
|
2011-06-29 08:18:26 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_HV(h_data_storage, 0xe00, 0x20)
|
2017-02-14 14:18:29 +08:00
|
|
|
EXC_VIRT_OOL_HV(h_data_storage, 0x4e00, 0x20, 0xe00)
|
2016-09-21 15:43:46 +08:00
|
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0xe00)
|
|
|
|
|
EXC_COMMON_BEGIN(h_data_storage_common)
|
|
|
|
|
mfspr r10,SPRN_HDAR
|
|
|
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
|
|
|
mfspr r10,SPRN_HDSISR
|
|
|
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl unknown_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_HV(h_instr_storage, 0xe20, 0x20)
|
2017-02-14 14:18:29 +08:00
|
|
|
EXC_VIRT_OOL_HV(h_instr_storage, 0x4e20, 0x20, 0xe20)
|
2016-09-21 15:43:47 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe20)
|
|
|
|
|
EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_HV(emulation_assist, 0xe40, 0x20)
|
|
|
|
|
EXC_VIRT_OOL_HV(emulation_assist, 0x4e40, 0x20, 0xe40)
|
2016-09-21 15:43:48 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe40)
|
|
|
|
|
EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
|
2016-09-21 15:44:07 +08:00
|
|
|
/*
|
|
|
|
|
* hmi_exception trampoline is a special case. It jumps to hmi_exception_early
|
|
|
|
|
* first, and then eventaully from there to the trampoline to get into virtual
|
|
|
|
|
* mode.
|
|
|
|
|
*/
|
2016-12-06 09:41:12 +08:00
|
|
|
__EXC_REAL_OOL_HV_DIRECT(hmi_exception, 0xe60, 0x20, hmi_exception_early)
|
2016-12-06 09:40:15 +08:00
|
|
|
__TRAMP_REAL_OOL_MASKABLE_HV(hmi_exception, 0xe60)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_NONE(0x4e60, 0x20)
|
2016-09-21 15:43:49 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe60)
|
|
|
|
|
TRAMP_REAL_BEGIN(hmi_exception_early)
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
|
powerpc/64s: Exception macro for stack frame and initial register save
This code is common to a few exceptions, and another user will be added.
This causes a trivial change to generated code:
- 604: std r9,416(r1)
- 608: mfspr r11,314
- 60c: std r11,368(r1)
- 610: mfspr r12,315
+ 604: mfspr r11,314
+ 608: mfspr r12,315
+ 60c: std r9,416(r1)
+ 610: std r11,368(r1)
machine_check_powernv_early could also use this, but that requires non
trivial changes to generated code, so that's for another patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-20 02:30:03 +08:00
|
|
|
mr r10,r1 /* Save r1 */
|
|
|
|
|
ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */
|
2016-09-21 15:43:49 +08:00
|
|
|
subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
|
|
|
|
|
mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
|
powerpc/64s: Exception macro for stack frame and initial register save
This code is common to a few exceptions, and another user will be added.
This causes a trivial change to generated code:
- 604: std r9,416(r1)
- 608: mfspr r11,314
- 60c: std r11,368(r1)
- 610: mfspr r12,315
+ 604: mfspr r11,314
+ 608: mfspr r12,315
+ 60c: std r9,416(r1)
+ 610: std r11,368(r1)
machine_check_powernv_early could also use this, but that requires non
trivial changes to generated code, so that's for another patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-20 02:30:03 +08:00
|
|
|
mfspr r12,SPRN_HSRR1 /* Save HSRR1 */
|
|
|
|
|
EXCEPTION_PROLOG_COMMON_1()
|
2016-09-21 15:43:49 +08:00
|
|
|
EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON_3(0xe60)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
powerpc/64: Fix HMI exception on LE with CONFIG_RELOCATABLE=y
Prior to commit 2337d207288f ("powerpc/64: CONFIG_RELOCATABLE support for hmi
interrupts"), the branch from hmi_exception_early() to hmi_exception_realmode()
was just a bl hmi_exception_realmode, which the linker would turn into a bl to
the local entry point of hmi_exception_realmode. This was broken when
CONFIG_RELOCATABLE=y because hmi_exception_realmode() is not in the low part of
the kernel text that is copied down to 0x0.
But in fixing that, we added a new bug on little endian kernels. Because the
branch is now a bctrl when CONFIG_RELOCATABLE=y, we branch to the global entry
point of hmi_exception_realmode(). The global entry point must be called with
r12 containing the address of hmi_exception_realmode(), because it uses that
value to calculate the TOC value (r2).
This may manifest as a checkstop, because we take a junk value from r12 which
came from HSRR1, add a small constant to it and then use that as the TOC
pointer. The HSRR1 value will have 0x9 as the top nibble, which puts it above
RAM and somewhere in MMIO space.
Fix it by changing the BRANCH_LINK_TO_FAR() macro to always use r12 to load the
label we're branching to. This means r12 will be setup correctly on LE, fixing
this bug, and r12 is also volatile across function calls on BE so it's a good
choice anyway.
Fixes: 2337d207288f ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts")
Reported-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 12:08:15 +08:00
|
|
|
BRANCH_LINK_TO_FAR(hmi_exception_realmode) /* Function call ABI */
|
2016-09-21 15:43:49 +08:00
|
|
|
/* Windup the stack. */
|
|
|
|
|
/* Move original HSRR0 and HSRR1 into the respective regs */
|
|
|
|
|
ld r9,_MSR(r1)
|
|
|
|
|
mtspr SPRN_HSRR1,r9
|
|
|
|
|
ld r3,_NIP(r1)
|
|
|
|
|
mtspr SPRN_HSRR0,r3
|
|
|
|
|
ld r9,_CTR(r1)
|
|
|
|
|
mtctr r9
|
|
|
|
|
ld r9,_XER(r1)
|
|
|
|
|
mtxer r9
|
|
|
|
|
ld r9,_LINK(r1)
|
|
|
|
|
mtlr r9
|
|
|
|
|
REST_GPR(0, r1)
|
|
|
|
|
REST_8GPRS(2, r1)
|
|
|
|
|
REST_GPR(10, r1)
|
|
|
|
|
ld r11,_CCR(r1)
|
|
|
|
|
mtcr r11
|
|
|
|
|
REST_GPR(11, r1)
|
|
|
|
|
REST_2GPRS(12, r1)
|
|
|
|
|
/* restore original r1. */
|
|
|
|
|
ld r1,GPR1(r1)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Go to virtual mode and pull the HMI event information from
|
|
|
|
|
* firmware.
|
|
|
|
|
*/
|
|
|
|
|
.globl hmi_exception_after_realmode
|
|
|
|
|
hmi_exception_after_realmode:
|
|
|
|
|
SET_SCRATCH0(r13)
|
|
|
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN)
|
|
|
|
|
b tramp_real_hmi_exception
|
|
|
|
|
|
|
|
|
|
EXC_COMMON_ASYNC(hmi_exception_common, 0xe60, handle_hmi_exception)
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_MASKABLE_HV(h_doorbell, 0xe80, 0x20)
|
|
|
|
|
EXC_VIRT_OOL_MASKABLE_HV(h_doorbell, 0x4e80, 0x20, 0xe80)
|
2016-09-21 15:43:50 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe80)
|
|
|
|
|
#ifdef CONFIG_PPC_DOORBELL
|
|
|
|
|
EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
|
|
|
|
|
#else
|
|
|
|
|
EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
|
|
|
|
|
#endif
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_MASKABLE_HV(h_virt_irq, 0xea0, 0x20)
|
|
|
|
|
EXC_VIRT_OOL_MASKABLE_HV(h_virt_irq, 0x4ea0, 0x20, 0xea0)
|
2016-09-21 15:43:51 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xea0)
|
|
|
|
|
EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
|
|
|
|
|
|
2016-07-08 14:37:06 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0xec0, 0x20)
|
|
|
|
|
EXC_VIRT_NONE(0x4ec0, 0x20)
|
|
|
|
|
EXC_REAL_NONE(0xee0, 0x20)
|
|
|
|
|
EXC_VIRT_NONE(0x4ee0, 0x20)
|
2016-09-21 15:43:52 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL(performance_monitor, 0xf00, 0x20)
|
|
|
|
|
EXC_VIRT_OOL(performance_monitor, 0x4f00, 0x20, 0xf00)
|
2016-09-21 15:43:53 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xf00)
|
|
|
|
|
EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL(altivec_unavailable, 0xf20, 0x20)
|
|
|
|
|
EXC_VIRT_OOL(altivec_unavailable, 0x4f20, 0x20, 0xf20)
|
2016-09-21 15:43:54 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xf20)
|
|
|
|
|
EXC_COMMON_BEGIN(altivec_unavailable_common)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
|
|
|
|
|
#ifdef CONFIG_ALTIVEC
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
beq 1f
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(69)
|
|
|
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
|
|
|
* transaction), go do TM stuff
|
|
|
|
|
*/
|
|
|
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
|
|
|
bne- 2f
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
|
|
|
|
|
#endif
|
|
|
|
|
bl load_up_altivec
|
|
|
|
|
b fast_exception_return
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
2: /* User process was in a transaction */
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl altivec_unavailable_tm
|
|
|
|
|
b ret_from_except
|
|
|
|
|
#endif
|
|
|
|
|
1:
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
|
|
|
#endif
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl altivec_unavailable_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL(vsx_unavailable, 0xf40, 0x20)
|
|
|
|
|
EXC_VIRT_OOL(vsx_unavailable, 0x4f40, 0x20, 0xf40)
|
2016-09-21 15:43:55 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xf40)
|
|
|
|
|
EXC_COMMON_BEGIN(vsx_unavailable_common)
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
|
|
|
|
|
#ifdef CONFIG_VSX
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
beq 1f
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(69)
|
|
|
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
|
|
|
* transaction), go do TM stuff
|
|
|
|
|
*/
|
|
|
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
|
|
|
bne- 2f
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
|
|
|
|
|
#endif
|
|
|
|
|
b load_up_vsx
|
|
|
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
|
|
|
2: /* User process was in a transaction */
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl vsx_unavailable_tm
|
|
|
|
|
b ret_from_except
|
|
|
|
|
#endif
|
|
|
|
|
1:
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
|
|
|
|
|
#endif
|
|
|
|
|
bl save_nvgprs
|
|
|
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl vsx_unavailable_exception
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL(facility_unavailable, 0xf60, 0x20)
|
|
|
|
|
EXC_VIRT_OOL(facility_unavailable, 0x4f60, 0x20, 0xf60)
|
2016-09-21 15:43:56 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xf60)
|
|
|
|
|
EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
|
|
|
|
|
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0x20)
|
|
|
|
|
EXC_VIRT_OOL_HV(h_facility_unavailable, 0x4f80, 0x20, 0xf80)
|
2016-09-21 15:43:57 +08:00
|
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xf80)
|
|
|
|
|
EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
|
|
|
|
|
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0xfa0, 0x20)
|
|
|
|
|
EXC_VIRT_NONE(0x4fa0, 0x20)
|
|
|
|
|
EXC_REAL_NONE(0xfc0, 0x20)
|
|
|
|
|
EXC_VIRT_NONE(0x4fc0, 0x20)
|
|
|
|
|
EXC_REAL_NONE(0xfe0, 0x20)
|
|
|
|
|
EXC_VIRT_NONE(0x4fe0, 0x20)
|
|
|
|
|
|
|
|
|
|
EXC_REAL_NONE(0x1000, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5000, 0x100)
|
|
|
|
|
EXC_REAL_NONE(0x1100, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5100, 0x100)
|
2013-02-14 00:21:38 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
#ifdef CONFIG_CBE_RAS
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_HV(cbe_system_error, 0x1200, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5200, 0x100)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1200)
|
2016-09-21 15:43:59 +08:00
|
|
|
EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
|
2016-09-30 17:43:18 +08:00
|
|
|
#else /* CONFIG_CBE_RAS */
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0x1200, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5200, 0x100)
|
2016-09-30 17:43:18 +08:00
|
|
|
#endif
|
2011-06-29 08:18:26 +08:00
|
|
|
|
2016-09-21 15:43:59 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(instruction_breakpoint, 0x1300, 0x100)
|
|
|
|
|
EXC_VIRT(instruction_breakpoint, 0x5300, 0x100, 0x1300)
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x1300)
|
2016-09-21 15:44:00 +08:00
|
|
|
EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
|
|
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0x1400, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5400, 0x100)
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100)
|
2012-09-10 08:35:26 +08:00
|
|
|
mtspr SPRN_SPRG_HSCRATCH0,r13
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN)
|
2013-08-12 14:12:06 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
|
2012-09-10 08:35:26 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
|
|
|
|
mfspr r10,SPRN_HSRR1
|
|
|
|
|
mfspr r11,SPRN_HSRR0 /* save HSRR0 */
|
2016-09-21 15:43:31 +08:00
|
|
|
andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */
|
|
|
|
|
addi r11,r11,-4 /* HSRR0 is next instruction */
|
|
|
|
|
bne+ denorm_assist
|
|
|
|
|
#endif
|
powerpc/book3s: handle machine check in Linux host.
Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.
This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.
The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.
This is the code flow:
Machine Check Interrupt
|
V
0x200 vector ME=0, IR=0, DR=0
|
V
+-----------------------------------------------+
|machine_check_pSeries_early: | ME=0, IR=0, DR=0
| Alloc frame on emergency stack |
| Save srr1, srr0, dar and dsisr on stack |
+-----------------------------------------------+
|
(ME=1, IR=0, DR=0, RFID)
|
V
machine_check_handle_early ME=1, IR=0, DR=0
|
V
+-----------------------------------------------+
| machine_check_early (r3=pt_regs) | ME=1, IR=0, DR=0
| Things to do: (in next patches) |
| Flush SLB for SLB errors |
| Flush TLB for TLB errors |
| Decode and save MCE info |
+-----------------------------------------------+
|
(Fall through existing exception handler routine.)
|
V
machine_check_pSerie ME=1, IR=0, DR=0
|
(ME=1, IR=1, DR=1, RFID)
|
V
machine_check_common ME=1, IR=1, DR=1
.
.
.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 22:34:08 +08:00
|
|
|
|
2016-09-21 15:43:31 +08:00
|
|
|
KVMTEST_PR(0x1500)
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100)
|
2016-08-10 18:48:43 +08:00
|
|
|
|
2016-09-21 15:44:01 +08:00
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
b exc_real_0x1500_denorm_exception_hv
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_END(denorm_exception, 0x5500, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
#else
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_VIRT_NONE(0x5500, 0x100)
|
2016-09-21 15:43:31 +08:00
|
|
|
#endif
|
|
|
|
|
|
2016-09-21 15:44:01 +08:00
|
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x1500)
|
2011-06-29 08:18:26 +08:00
|
|
|
|
2012-09-10 08:35:26 +08:00
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_REAL_BEGIN(denorm_assist)
|
2012-09-10 08:35:26 +08:00
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
/*
|
|
|
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
|
|
|
* For POWER6 do that here for all FP regs.
|
|
|
|
|
*/
|
|
|
|
|
mfmsr r10
|
|
|
|
|
ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
|
|
|
|
|
xori r10,r10,(MSR_FE0|MSR_FE1)
|
|
|
|
|
mtmsrd r10
|
|
|
|
|
sync
|
2013-05-30 05:33:18 +08:00
|
|
|
|
|
|
|
|
#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1
|
|
|
|
|
#define FMR4(n) FMR2(n) ; FMR2(n+2)
|
|
|
|
|
#define FMR8(n) FMR4(n) ; FMR4(n+4)
|
|
|
|
|
#define FMR16(n) FMR8(n) ; FMR8(n+8)
|
|
|
|
|
#define FMR32(n) FMR16(n) ; FMR16(n+16)
|
|
|
|
|
FMR32(0)
|
|
|
|
|
|
2012-09-10 08:35:26 +08:00
|
|
|
FTR_SECTION_ELSE
|
|
|
|
|
/*
|
|
|
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
|
|
|
* For POWER7 do that here for the first 32 VSX registers only.
|
|
|
|
|
*/
|
|
|
|
|
mfmsr r10
|
|
|
|
|
oris r10,r10,MSR_VSX@h
|
|
|
|
|
mtmsrd r10
|
|
|
|
|
sync
|
2013-05-30 05:33:18 +08:00
|
|
|
|
|
|
|
|
#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
|
|
|
|
|
#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
|
|
|
|
|
#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
|
|
|
|
|
#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
|
|
|
|
|
#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
|
|
|
|
|
XVCPSGNDP32(0)
|
|
|
|
|
|
2012-09-10 08:35:26 +08:00
|
|
|
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
|
2013-05-30 05:33:19 +08:00
|
|
|
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
b denorm_done
|
|
|
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
|
|
|
|
|
/*
|
|
|
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
|
|
|
* For POWER8 we need to do that for all 64 VSX registers
|
|
|
|
|
*/
|
|
|
|
|
XVCPSGNDP32(32)
|
|
|
|
|
denorm_done:
|
2012-09-10 08:35:26 +08:00
|
|
|
mtspr SPRN_HSRR0,r11
|
|
|
|
|
mtcrf 0x80,r9
|
|
|
|
|
ld r9,PACA_EXGEN+EX_R9(r13)
|
2012-12-07 05:51:04 +08:00
|
|
|
RESTORE_PPR_PACA(PACA_EXGEN, r10)
|
2013-08-12 14:12:06 +08:00
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
ld r10,PACA_EXGEN+EX_CFAR(r13)
|
|
|
|
|
mtspr SPRN_CFAR,r10
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
|
2012-09-10 08:35:26 +08:00
|
|
|
ld r10,PACA_EXGEN+EX_R10(r13)
|
|
|
|
|
ld r11,PACA_EXGEN+EX_R11(r13)
|
|
|
|
|
ld r12,PACA_EXGEN+EX_R12(r13)
|
|
|
|
|
ld r13,PACA_EXGEN+EX_R13(r13)
|
|
|
|
|
HRFID
|
|
|
|
|
b .
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-09-21 15:44:01 +08:00
|
|
|
EXC_COMMON_HV(denorm_common, 0x1500, unknown_exception)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CBE_RAS
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_HV(cbe_maintenance, 0x1600, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5600, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1600)
|
2016-09-21 15:44:02 +08:00
|
|
|
EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
|
2016-09-21 15:44:01 +08:00
|
|
|
#else /* CONFIG_CBE_RAS */
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0x1600, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5600, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
#endif
|
|
|
|
|
|
2016-09-21 15:44:02 +08:00
|
|
|
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL(altivec_assist, 0x1700, 0x100)
|
|
|
|
|
EXC_VIRT(altivec_assist, 0x5700, 0x100, 0x1700)
|
2016-09-21 15:44:01 +08:00
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x1700)
|
2016-09-21 15:44:03 +08:00
|
|
|
#ifdef CONFIG_ALTIVEC
|
|
|
|
|
EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
|
|
|
|
|
#else
|
|
|
|
|
EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-09-21 15:44:01 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_CBE_RAS
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_HV(cbe_thermal, 0x1800, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5800, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800)
|
2016-09-21 15:44:04 +08:00
|
|
|
EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
|
2016-09-21 15:44:01 +08:00
|
|
|
#else /* CONFIG_CBE_RAS */
|
2016-12-06 09:41:12 +08:00
|
|
|
EXC_REAL_NONE(0x1800, 0x100)
|
|
|
|
|
EXC_VIRT_NONE(0x5800, 0x100)
|
2016-09-21 15:44:01 +08:00
|
|
|
#endif
|
|
|
|
|
|
2017-08-01 20:00:52 +08:00
|
|
|
#ifdef CONFIG_PPC_WATCHDOG
|
2017-07-13 05:35:52 +08:00
|
|
|
|
|
|
|
|
#define MASKED_DEC_HANDLER_LABEL 3f
|
|
|
|
|
|
|
|
|
|
#define MASKED_DEC_HANDLER(_H) \
|
|
|
|
|
3: /* soft-nmi */ \
|
|
|
|
|
std r12,PACA_EXGEN+EX_R12(r13); \
|
|
|
|
|
GET_SCRATCH0(r10); \
|
|
|
|
|
std r10,PACA_EXGEN+EX_R13(r13); \
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_1(soft_nmi_common, _H)
|
|
|
|
|
|
2017-07-29 20:50:27 +08:00
|
|
|
/*
|
|
|
|
|
* Branch to soft_nmi_interrupt using the emergency stack. The emergency
|
|
|
|
|
* stack is one that is usable by maskable interrupts so long as MSR_EE
|
|
|
|
|
* remains off. It is used for recovery when something has corrupted the
|
|
|
|
|
* normal kernel stack, for example. The "soft NMI" must not use the process
|
|
|
|
|
* stack because we want irq disabled sections to avoid touching the stack
|
|
|
|
|
* at all (other than PMU interrupts), so use the emergency stack for this,
|
|
|
|
|
* and run it entirely with interrupts hard disabled.
|
|
|
|
|
*/
|
2017-07-13 05:35:52 +08:00
|
|
|
EXC_COMMON_BEGIN(soft_nmi_common)
|
|
|
|
|
mr r10,r1
|
|
|
|
|
ld r1,PACAEMERGSP(r13)
|
|
|
|
|
subi r1,r1,INT_FRAME_SIZE
|
|
|
|
|
EXCEPTION_COMMON_NORET_STACK(PACA_EXGEN, 0x900,
|
|
|
|
|
system_reset, soft_nmi_interrupt,
|
|
|
|
|
ADD_NVGPRS;ADD_RECONCILE)
|
|
|
|
|
b ret_from_except
|
|
|
|
|
|
2017-08-01 20:00:52 +08:00
|
|
|
#else /* CONFIG_PPC_WATCHDOG */
|
2017-07-13 05:35:52 +08:00
|
|
|
#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */
|
|
|
|
|
#define MASKED_DEC_HANDLER(_H)
|
2017-08-01 20:00:52 +08:00
|
|
|
#endif /* CONFIG_PPC_WATCHDOG */
|
2016-09-21 15:44:01 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/*
|
2012-11-15 02:49:48 +08:00
|
|
|
* An interrupt came in while soft-disabled. We set paca->irq_happened, then:
|
|
|
|
|
* - If it was a decrementer interrupt, we bump the dec to max and and return.
|
|
|
|
|
* - If it was a doorbell we return immediately since doorbells are edge
|
|
|
|
|
* triggered and won't automatically refire.
|
2014-07-29 21:10:01 +08:00
|
|
|
* - If it was a HMI we return immediately since we handled it in realmode
|
|
|
|
|
* and it won't refire.
|
2012-11-15 02:49:48 +08:00
|
|
|
* - else we hard disable and return.
|
|
|
|
|
* This is called with r10 containing the value to OR to the paca field.
|
2009-06-03 05:17:38 +08:00
|
|
|
*/
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
#define MASKED_INTERRUPT(_H) \
|
|
|
|
|
masked_##_H##interrupt: \
|
|
|
|
|
std r11,PACA_EXGEN+EX_R11(r13); \
|
|
|
|
|
lbz r11,PACAIRQHAPPENED(r13); \
|
|
|
|
|
or r11,r11,r10; \
|
|
|
|
|
stb r11,PACAIRQHAPPENED(r13); \
|
2012-11-15 02:49:48 +08:00
|
|
|
cmpwi r10,PACA_IRQ_DEC; \
|
|
|
|
|
bne 1f; \
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
lis r10,0x7fff; \
|
|
|
|
|
ori r10,r10,0xffff; \
|
|
|
|
|
mtspr SPRN_DEC,r10; \
|
2017-07-13 05:35:52 +08:00
|
|
|
b MASKED_DEC_HANDLER_LABEL; \
|
2017-08-12 00:38:59 +08:00
|
|
|
1: andi. r10,r10,(PACA_IRQ_DBELL|PACA_IRQ_HMI); \
|
|
|
|
|
bne 2f; \
|
2012-11-15 02:49:48 +08:00
|
|
|
mfspr r10,SPRN_##_H##SRR1; \
|
2017-08-12 00:39:00 +08:00
|
|
|
xori r10,r10,MSR_EE; /* clear MSR_EE */ \
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
mtspr SPRN_##_H##SRR1,r10; \
|
|
|
|
|
2: mtcrf 0x80,r9; \
|
|
|
|
|
ld r9,PACA_EXGEN+EX_R9(r13); \
|
|
|
|
|
ld r10,PACA_EXGEN+EX_R10(r13); \
|
|
|
|
|
ld r11,PACA_EXGEN+EX_R11(r13); \
|
|
|
|
|
GET_SCRATCH0(r13); \
|
|
|
|
|
##_H##rfid; \
|
2017-07-13 05:35:52 +08:00
|
|
|
b .; \
|
|
|
|
|
MASKED_DEC_HANDLER(_H)
|
2016-09-28 09:31:48 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Real mode exceptions actually use this too, but alternate
|
|
|
|
|
* instruction code patches (which end up in the common .text area)
|
|
|
|
|
* cannot reach these if they are put there.
|
|
|
|
|
*/
|
|
|
|
|
USE_FIXED_SECTION(virt_trampolines)
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
MASKED_INTERRUPT()
|
|
|
|
|
MASKED_INTERRUPT(H)
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2013-09-20 12:52:50 +08:00
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_REAL_BEGIN(kvmppc_skip_interrupt)
|
2013-09-20 12:52:50 +08:00
|
|
|
/*
|
|
|
|
|
* Here all GPRs are unchanged from when the interrupt happened
|
|
|
|
|
* except for r13, which is saved in SPRG_SCRATCH0.
|
|
|
|
|
*/
|
|
|
|
|
mfspr r13, SPRN_SRR0
|
|
|
|
|
addi r13, r13, 4
|
|
|
|
|
mtspr SPRN_SRR0, r13
|
|
|
|
|
GET_SCRATCH0(r13)
|
|
|
|
|
rfid
|
|
|
|
|
b .
|
|
|
|
|
|
2016-09-30 17:43:18 +08:00
|
|
|
TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
|
2013-09-20 12:52:50 +08:00
|
|
|
/*
|
|
|
|
|
* Here all GPRs are unchanged from when the interrupt happened
|
|
|
|
|
* except for r13, which is saved in SPRG_SCRATCH0.
|
|
|
|
|
*/
|
|
|
|
|
mfspr r13, SPRN_HSRR0
|
|
|
|
|
addi r13, r13, 4
|
|
|
|
|
mtspr SPRN_HSRR0, r13
|
|
|
|
|
GET_SCRATCH0(r13)
|
|
|
|
|
hrfid
|
|
|
|
|
b .
|
|
|
|
|
#endif
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/*
|
2016-04-08 06:00:34 +08:00
|
|
|
* Ensure that any handlers that get invoked from the exception prologs
|
|
|
|
|
* above are below the first 64KB (0x10000) of the kernel image because
|
|
|
|
|
* the prologs assemble the addresses of these handlers using the
|
|
|
|
|
* LOAD_HANDLER macro, which uses an ori instruction.
|
2009-06-03 05:17:38 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*** Common interrupt handlers ***/
|
|
|
|
|
|
|
|
|
|
|
2012-11-02 14:21:43 +08:00
|
|
|
/*
|
|
|
|
|
* Relocation-on interrupts: A subset of the interrupts can be delivered
|
|
|
|
|
* with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
|
|
|
|
|
* it. Addresses are the same as the original interrupt addresses, but
|
|
|
|
|
* offset by 0xc000000000004000.
|
|
|
|
|
* It's impossible to receive interrupts below 0x300 via this mechanism.
|
|
|
|
|
* KVM: None of these traps are from the guest ; anything that escalated
|
|
|
|
|
* to HV=1 from HV=0 is delivered via real mode handlers.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This uses the standard macro, since the original 0x300 vector
|
|
|
|
|
* only has extra guff for STAB-based processors -- which never
|
|
|
|
|
* come here.
|
|
|
|
|
*/
|
2016-09-30 17:43:18 +08:00
|
|
|
|
2016-09-28 09:31:48 +08:00
|
|
|
EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
|
2014-02-04 13:04:35 +08:00
|
|
|
b __ppc64_runlatch_on
|
2012-03-01 09:45:27 +08:00
|
|
|
|
2016-09-28 09:31:48 +08:00
|
|
|
USE_FIXED_SECTION(virt_trampolines)
|
powerpc/book3s64: Fix branching to OOL handlers in relocatable kernel
Some of the interrupt vectors on 64-bit POWER server processors are only
32 bytes long (8 instructions), which is not enough for the full
first-level interrupt handler. For these we need to branch to an
out-of-line (OOL) handler. But when we are running a relocatable kernel,
interrupt vectors till __end_interrupts marker are copied down to real
address 0x100. So, branching to labels (ie. OOL handlers) outside this
section must be handled differently (see LOAD_HANDLER()), considering
relocatable kernel, which would need at least 4 instructions.
However, branching from interrupt vector means that we corrupt the
CFAR (come-from address register) on POWER7 and later processors as
mentioned in commit 1707dd16. So, EXCEPTION_PROLOG_0 (6 instructions)
that contains the part up to the point where the CFAR is saved in the
PACA should be part of the short interrupt vectors before we branch out
to OOL handlers.
But as mentioned already, there are interrupt vectors on 64-bit POWER
server processors that are only 32 bytes long (like vectors 0x4f00,
0x4f20, etc.), which cannot accomodate the above two cases at the same
time owing to space constraint. Currently, in these interrupt vectors,
we simply branch out to OOL handlers, without using LOAD_HANDLER(),
which leaves us vulnerable when running a relocatable kernel (eg. kdump
case). While this has been the case for sometime now and kdump is used
widely, we were fortunate not to see any problems so far, for three
reasons:
1. In almost all cases, production kernel (relocatable) is used for
kdump as well, which would mean that crashed kernel's OOL handler
would be at the same place where we end up branching to, from short
interrupt vector of kdump kernel.
2. Also, OOL handler was unlikely the reason for crash in almost all
the kdump scenarios, which meant we had a sane OOL handler from
crashed kernel that we branched to.
3. On most 64-bit POWER server processors, page size is large enough
that marking interrupt vector code as executable (see commit
429d2e83) leads to marking OOL handler code from crashed kernel,
that sits right below interrupt vector code from kdump kernel, as
executable as well.
Let us fix this by moving the __end_interrupts marker down past OOL
handlers to make sure that we also copy OOL handlers to real address
0x100 when running a relocatable kernel.
This fix has been tested successfully in kdump scenario, on an LPAR with
4K page size by using different default/production kernel and kdump
kernel.
Also tested by manually corrupting the OOL handlers in the first kernel
and then kdump'ing, and then causing the OOL handlers to fire - mpe.
Fixes: c1fb6816fb1b ("powerpc: Add relocation on exception vector handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-15 20:48:02 +08:00
|
|
|
/*
|
|
|
|
|
* The __end_interrupts marker must be past the out-of-line (OOL)
|
|
|
|
|
* handlers, so that they are copied to real address 0x100 when running
|
|
|
|
|
* a relocatable kernel. This ensures they can be reached from the short
|
|
|
|
|
* trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
|
|
|
|
|
* directly, without using LOAD_HANDLER().
|
|
|
|
|
*/
|
|
|
|
|
.align 7
|
|
|
|
|
.globl __end_interrupts
|
|
|
|
|
__end_interrupts:
|
2016-09-28 09:31:48 +08:00
|
|
|
DEFINE_FIXED_SYMBOL(__end_interrupts)
|
2013-01-10 14:44:19 +08:00
|
|
|
|
2013-03-25 09:31:31 +08:00
|
|
|
#ifdef CONFIG_PPC_970_NAP
|
2016-10-11 15:47:56 +08:00
|
|
|
EXC_COMMON_BEGIN(power4_fixup_nap)
|
2013-03-25 09:31:31 +08:00
|
|
|
andc r9,r9,r10
|
|
|
|
|
std r9,TI_LOCAL_FLAGS(r11)
|
|
|
|
|
ld r10,_LINK(r1) /* make idle task do the */
|
|
|
|
|
std r10,_NIP(r1) /* equivalent of a blr */
|
|
|
|
|
blr
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-09-28 09:31:48 +08:00
|
|
|
CLOSE_FIXED_SECTION(real_vectors);
|
|
|
|
|
CLOSE_FIXED_SECTION(real_trampolines);
|
|
|
|
|
CLOSE_FIXED_SECTION(virt_vectors);
|
|
|
|
|
CLOSE_FIXED_SECTION(virt_trampolines);
|
|
|
|
|
|
|
|
|
|
USE_TEXT_SECTION()
|
|
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/*
|
|
|
|
|
* Hash table stuff
|
|
|
|
|
*/
|
2016-10-13 11:43:52 +08:00
|
|
|
.balign IFETCH_ALIGN_BYTES
|
2014-02-04 13:06:11 +08:00
|
|
|
do_hash_page:
|
2017-07-19 12:49:27 +08:00
|
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
|
|
|
|
lis r0,DSISR_BAD_FAULT_64S@h
|
|
|
|
|
ori r0,r0,DSISR_BAD_FAULT_64S@l
|
|
|
|
|
and. r0,r4,r0 /* weird error? */
|
2009-06-03 05:17:38 +08:00
|
|
|
bne- handle_page_fault /* if not, try to insert a HPTE */
|
2012-07-05 12:41:35 +08:00
|
|
|
CURRENT_THREAD_INFO(r11, r1)
|
powerpc: Allow perf_counters to access user memory at interrupt time
This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine. Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor. This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table. 32-bit processors are already able to access user memory
at interrupt time. Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.
On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca. This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields. To prevent this, we hard-disable
interrupts in switch_slb. Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.
This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.
Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.
If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism. An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-17 13:17:54 +08:00
|
|
|
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
|
|
|
|
|
andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
|
|
|
|
|
bne 77f /* then don't call hash_page now */
|
2009-06-03 05:17:38 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* r3 contains the faulting address
|
2015-12-01 11:36:44 +08:00
|
|
|
* r4 msr
|
2009-06-03 05:17:38 +08:00
|
|
|
* r5 contains the trap number
|
2014-12-04 13:30:14 +08:00
|
|
|
* r6 contains dsisr
|
2009-06-03 05:17:38 +08:00
|
|
|
*
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
* at return r3 = 0 for success, 1 for page fault, negative for error
|
2009-06-03 05:17:38 +08:00
|
|
|
*/
|
2015-12-01 11:36:44 +08:00
|
|
|
mr r4,r12
|
2014-12-04 13:30:14 +08:00
|
|
|
ld r6,_DSISR(r1)
|
2015-12-01 11:36:44 +08:00
|
|
|
bl __hash_page /* build HPTE if possible */
|
|
|
|
|
cmpdi r3,0 /* see if __hash_page succeeded */
|
2009-06-03 05:17:38 +08:00
|
|
|
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
/* Success */
|
2009-06-03 05:17:38 +08:00
|
|
|
beq fast_exc_return_irq /* Return from exception on success */
|
|
|
|
|
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
/* Error */
|
|
|
|
|
blt- 13f
|
2017-06-14 02:42:00 +08:00
|
|
|
|
|
|
|
|
/* Reload DSISR into r4 for the DABR check below */
|
|
|
|
|
ld r4,_DSISR(r1)
|
2016-04-29 21:26:07 +08:00
|
|
|
#endif /* CONFIG_PPC_STD_MMU_64 */
|
2010-03-30 07:59:25 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
/* Here we have a page fault that hash_page can't handle. */
|
|
|
|
|
handle_page_fault:
|
2017-06-14 02:42:00 +08:00
|
|
|
11: andis. r0,r4,DSISR_DABRMATCH@h
|
|
|
|
|
bne- handle_dabr_fault
|
|
|
|
|
ld r4,_DAR(r1)
|
2009-06-03 05:17:38 +08:00
|
|
|
ld r5,_DSISR(r1)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
2014-02-04 13:04:35 +08:00
|
|
|
bl do_page_fault
|
2009-06-03 05:17:38 +08:00
|
|
|
cmpdi r3,0
|
2012-03-07 13:48:45 +08:00
|
|
|
beq+ 12f
|
2014-02-04 13:04:35 +08:00
|
|
|
bl save_nvgprs
|
2009-06-03 05:17:38 +08:00
|
|
|
mr r5,r3
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
lwz r4,_DAR(r1)
|
2014-02-04 13:04:35 +08:00
|
|
|
bl bad_page_fault
|
|
|
|
|
b ret_from_except
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2012-03-07 13:48:45 +08:00
|
|
|
/* We have a data breakpoint exception - handle it */
|
|
|
|
|
handle_dabr_fault:
|
2014-02-04 13:04:35 +08:00
|
|
|
bl save_nvgprs
|
2012-03-07 13:48:45 +08:00
|
|
|
ld r4,_DAR(r1)
|
|
|
|
|
ld r5,_DSISR(r1)
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
2014-02-04 13:04:35 +08:00
|
|
|
bl do_break
|
|
|
|
|
12: b ret_from_except_lite
|
2012-03-07 13:48:45 +08:00
|
|
|
|
2009-06-03 05:17:38 +08:00
|
|
|
|
2016-04-29 21:26:07 +08:00
|
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
2009-06-03 05:17:38 +08:00
|
|
|
/* We have a page fault that hash_page could handle but HV refused
|
|
|
|
|
* the PTE insertion
|
|
|
|
|
*/
|
2014-02-04 13:04:35 +08:00
|
|
|
13: bl save_nvgprs
|
2009-06-03 05:17:38 +08:00
|
|
|
mr r5,r3
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
ld r4,_DAR(r1)
|
2014-02-04 13:04:35 +08:00
|
|
|
bl low_hash_fault
|
|
|
|
|
b ret_from_except
|
2016-04-29 21:26:07 +08:00
|
|
|
#endif
|
2009-06-03 05:17:38 +08:00
|
|
|
|
powerpc: Allow perf_counters to access user memory at interrupt time
This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine. Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor. This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table. 32-bit processors are already able to access user memory
at interrupt time. Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.
On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca. This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields. To prevent this, we hard-disable
interrupts in switch_slb. Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.
This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.
Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.
If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism. An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-17 13:17:54 +08:00
|
|
|
/*
|
|
|
|
|
* We come here as a result of a DSI at a point where we don't want
|
|
|
|
|
* to call hash_page, such as when we are accessing memory (possibly
|
|
|
|
|
* user memory) inside a PMU interrupt that occurred while interrupts
|
|
|
|
|
* were soft-disabled. We want to invoke the exception handler for
|
|
|
|
|
* the access, or panic if there isn't a handler.
|
|
|
|
|
*/
|
2014-02-04 13:04:35 +08:00
|
|
|
77: bl save_nvgprs
|
powerpc: Allow perf_counters to access user memory at interrupt time
This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine. Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor. This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table. 32-bit processors are already able to access user memory
at interrupt time. Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.
On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca. This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields. To prevent this, we hard-disable
interrupts in switch_slb. Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.
This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.
Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.
If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism. An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-17 13:17:54 +08:00
|
|
|
mr r4,r3
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
li r5,SIGSEGV
|
2014-02-04 13:04:35 +08:00
|
|
|
bl bad_page_fault
|
|
|
|
|
b ret_from_except
|
2014-07-15 18:25:02 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Here we have detected that the kernel stack pointer is bad.
|
|
|
|
|
* R9 contains the saved CR, r13 points to the paca,
|
|
|
|
|
* r10 contains the (bad) kernel stack pointer,
|
|
|
|
|
* r11 and r12 contain the saved SRR0 and SRR1.
|
|
|
|
|
* We switch to using an emergency stack, save the registers there,
|
|
|
|
|
* and call kernel_bad_stack(), which panics.
|
|
|
|
|
*/
|
|
|
|
|
bad_stack:
|
|
|
|
|
ld r1,PACAEMERGSP(r13)
|
|
|
|
|
subi r1,r1,64+INT_FRAME_SIZE
|
|
|
|
|
std r9,_CCR(r1)
|
|
|
|
|
std r10,GPR1(r1)
|
|
|
|
|
std r11,_NIP(r1)
|
|
|
|
|
std r12,_MSR(r1)
|
|
|
|
|
mfspr r11,SPRN_DAR
|
|
|
|
|
mfspr r12,SPRN_DSISR
|
|
|
|
|
std r11,_DAR(r1)
|
|
|
|
|
std r12,_DSISR(r1)
|
|
|
|
|
mflr r10
|
|
|
|
|
mfctr r11
|
|
|
|
|
mfxer r12
|
|
|
|
|
std r10,_LINK(r1)
|
|
|
|
|
std r11,_CTR(r1)
|
|
|
|
|
std r12,_XER(r1)
|
|
|
|
|
SAVE_GPR(0,r1)
|
|
|
|
|
SAVE_GPR(2,r1)
|
|
|
|
|
ld r10,EX_R3(r3)
|
|
|
|
|
std r10,GPR3(r1)
|
|
|
|
|
SAVE_GPR(4,r1)
|
|
|
|
|
SAVE_4GPRS(5,r1)
|
|
|
|
|
ld r9,EX_R9(r3)
|
|
|
|
|
ld r10,EX_R10(r3)
|
|
|
|
|
SAVE_2GPRS(9,r1)
|
|
|
|
|
ld r9,EX_R11(r3)
|
|
|
|
|
ld r10,EX_R12(r3)
|
|
|
|
|
ld r11,EX_R13(r3)
|
|
|
|
|
std r9,GPR11(r1)
|
|
|
|
|
std r10,GPR12(r1)
|
|
|
|
|
std r11,GPR13(r1)
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
ld r10,EX_CFAR(r3)
|
|
|
|
|
std r10,ORIG_GPR3(r1)
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
|
|
|
|
|
SAVE_8GPRS(14,r1)
|
|
|
|
|
SAVE_10GPRS(22,r1)
|
|
|
|
|
lhz r12,PACA_TRAP_SAVE(r13)
|
|
|
|
|
std r12,_TRAP(r1)
|
|
|
|
|
addi r11,r1,INT_FRAME_SIZE
|
|
|
|
|
std r11,0(r1)
|
|
|
|
|
li r12,0
|
|
|
|
|
std r12,0(r11)
|
|
|
|
|
ld r2,PACATOC(r13)
|
|
|
|
|
ld r11,exception_marker@toc(r2)
|
|
|
|
|
std r12,RESULT(r1)
|
|
|
|
|
std r11,STACK_FRAME_OVERHEAD-16(r1)
|
|
|
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
|
|
|
bl kernel_bad_stack
|
|
|
|
|
b 1b
|
2017-06-30 01:49:19 +08:00
|
|
|
_ASM_NOKPROBE_SYMBOL(bad_stack);
|
2016-09-21 15:44:05 +08:00
|
|
|
|
2017-06-13 21:05:48 +08:00
|
|
|
/*
|
|
|
|
|
* When doorbell is triggered from system reset wakeup, the message is
|
|
|
|
|
* not cleared, so it would fire again when EE is enabled.
|
|
|
|
|
*
|
|
|
|
|
* When coming from local_irq_enable, there may be the same problem if
|
|
|
|
|
* we were hard disabled.
|
|
|
|
|
*
|
|
|
|
|
* Execute msgclr to clear pending exceptions before handling it.
|
|
|
|
|
*/
|
|
|
|
|
h_doorbell_common_msgclr:
|
|
|
|
|
LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36))
|
|
|
|
|
PPC_MSGCLR(3)
|
|
|
|
|
b h_doorbell_common
|
|
|
|
|
|
|
|
|
|
doorbell_super_common_msgclr:
|
|
|
|
|
LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36))
|
|
|
|
|
PPC_MSGCLRP(3)
|
|
|
|
|
b doorbell_super_common
|
|
|
|
|
|
2016-09-21 15:44:05 +08:00
|
|
|
/*
|
|
|
|
|
* Called from arch_local_irq_enable when an interrupt needs
|
|
|
|
|
* to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
|
|
|
|
|
* which kind of interrupt. MSR:EE is already off. We generate a
|
|
|
|
|
* stackframe like if a real interrupt had happened.
|
|
|
|
|
*
|
|
|
|
|
* Note: While MSR:EE is off, we need to make sure that _MSR
|
|
|
|
|
* in the generated frame has EE set to 1 or the exception
|
|
|
|
|
* handler will not properly re-enable them.
|
2017-06-13 21:05:49 +08:00
|
|
|
*
|
|
|
|
|
* Note that we don't specify LR as the NIP (return address) for
|
|
|
|
|
* the interrupt because that would unbalance the return branch
|
|
|
|
|
* predictor.
|
2016-09-21 15:44:05 +08:00
|
|
|
*/
|
|
|
|
|
_GLOBAL(__replay_interrupt)
|
|
|
|
|
/* We are going to jump to the exception common code which
|
|
|
|
|
* will retrieve various register values from the PACA which
|
|
|
|
|
* we don't give a damn about, so we don't bother storing them.
|
|
|
|
|
*/
|
|
|
|
|
mfmsr r12
|
2017-08-22 09:51:37 +08:00
|
|
|
LOAD_REG_ADDR(r11, replay_interrupt_return)
|
2016-09-21 15:44:05 +08:00
|
|
|
mfcr r9
|
|
|
|
|
ori r12,r12,MSR_EE
|
|
|
|
|
cmpwi r3,0x900
|
|
|
|
|
beq decrementer_common
|
|
|
|
|
cmpwi r3,0x500
|
|
|
|
|
beq hardware_interrupt_common
|
|
|
|
|
BEGIN_FTR_SECTION
|
|
|
|
|
cmpwi r3,0xe80
|
2017-06-13 21:05:48 +08:00
|
|
|
beq h_doorbell_common_msgclr
|
2016-09-21 15:44:05 +08:00
|
|
|
cmpwi r3,0xea0
|
|
|
|
|
beq h_virt_irq_common
|
|
|
|
|
cmpwi r3,0xe60
|
|
|
|
|
beq hmi_exception_common
|
|
|
|
|
FTR_SECTION_ELSE
|
|
|
|
|
cmpwi r3,0xa00
|
2017-06-13 21:05:48 +08:00
|
|
|
beq doorbell_super_common_msgclr
|
2016-09-21 15:44:05 +08:00
|
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
2017-08-22 09:51:37 +08:00
|
|
|
replay_interrupt_return:
|
2016-09-21 15:44:05 +08:00
|
|
|
blr
|
2017-06-13 21:05:49 +08:00
|
|
|
|
2017-06-30 01:49:19 +08:00
|
|
|
_ASM_NOKPROBE_SYMBOL(__replay_interrupt)
|