OpenCloudOS-Kernel/mm/frontswap.c

498 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* Frontswap frontend
*
* This code provides the generic "frontend" layer to call a matching
* "backend" driver implementation of frontswap. See
* Documentation/vm/frontswap.rst for more information.
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
*
* Copyright (C) 2009-2012 Oracle Corp. All rights reserved.
* Author: Dan Magenheimer
*/
#include <linux/mman.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/security.h>
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/frontswap.h>
#include <linux/swapfile.h>
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
DEFINE_STATIC_KEY_FALSE(frontswap_enabled_key);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* frontswap_ops are added by frontswap_register_ops, and provide the
* frontswap "backend" implementation functions. Multiple implementations
* may be registered, but implementations can never deregister. This
* is a simple singly-linked list of all registered implementations.
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
*/
static struct frontswap_ops *frontswap_ops __read_mostly;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
#define for_each_frontswap_ops(ops) \
for ((ops) = frontswap_ops; (ops); (ops) = (ops)->next)
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* If enabled, frontswap_store will return failure even on success. As
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
* a result, the swap subsystem will always write the page to swap, in
* effect converting frontswap into a writethrough cache. In this mode,
* there is no direct reduction in swap writes, but a frontswap backend
* can unilaterally "reclaim" any pages in use with no data loss, thus
* providing increases control over maximum memory usage due to frontswap.
*/
static bool frontswap_writethrough_enabled __read_mostly;
frontswap: support exclusive gets if tmem backend is capable Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21 03:16:52 +08:00
/*
* If enabled, the underlying tmem implementation is capable of doing
* exclusive gets, so frontswap_load, on a successful tmem_get must
* mark the page as no longer in frontswap AND mark it dirty.
*/
static bool frontswap_tmem_exclusive_gets_enabled __read_mostly;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
#ifdef CONFIG_DEBUG_FS
/*
* Counters available via /sys/kernel/debug/frontswap (if debugfs is
* properly configured). These are for information only so are not protected
* against increment races.
*/
static u64 frontswap_loads;
static u64 frontswap_succ_stores;
static u64 frontswap_failed_stores;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
static u64 frontswap_invalidates;
static inline void inc_frontswap_loads(void) {
frontswap_loads++;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
static inline void inc_frontswap_succ_stores(void) {
frontswap_succ_stores++;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
static inline void inc_frontswap_failed_stores(void) {
frontswap_failed_stores++;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
static inline void inc_frontswap_invalidates(void) {
frontswap_invalidates++;
}
#else
static inline void inc_frontswap_loads(void) { }
static inline void inc_frontswap_succ_stores(void) { }
static inline void inc_frontswap_failed_stores(void) { }
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
static inline void inc_frontswap_invalidates(void) { }
#endif
/*
* Due to the asynchronous nature of the backends loading potentially
* _after_ the swap system has been activated, we have chokepoints
* on all frontswap functions to not call the backend until the backend
* has registered.
*
* This would not guards us against the user deciding to call swapoff right as
* we are calling the backend to initialize (so swapon is in action).
* Fortunatly for us, the swapon_mutex has been taked by the callee so we are
* OK. The other scenario where calls to frontswap_store (called via
* swap_writepage) is racing with frontswap_invalidate_area (called via
* swapoff) is again guarded by the swap subsystem.
*
* While no backend is registered all calls to frontswap_[store|load|
* invalidate_area|invalidate_page] are ignored or fail.
*
* The time between the backend being registered and the swap file system
* calling the backend (via the frontswap_* functions) is indeterminate as
* frontswap_ops is not atomic_t (or a value guarded by a spinlock).
* That is OK as we are comfortable missing some of these calls to the newly
* registered backend.
*
* Obviously the opposite (unloading the backend) must be done after all
* the frontswap_[store|load|invalidate_area|invalidate_page] start
* ignoring or failing the requests. However, there is currently no way
* to unload a backend once it is registered.
*/
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* Register operations for frontswap
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
*/
void frontswap_register_ops(struct frontswap_ops *ops)
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
{
DECLARE_BITMAP(a, MAX_SWAPFILES);
DECLARE_BITMAP(b, MAX_SWAPFILES);
struct swap_info_struct *si;
unsigned int i;
bitmap_zero(a, MAX_SWAPFILES);
bitmap_zero(b, MAX_SWAPFILES);
spin_lock(&swap_lock);
plist_for_each_entry(si, &swap_active_head, list) {
if (!WARN_ON(!si->frontswap_map))
set_bit(si->type, a);
}
spin_unlock(&swap_lock);
/* the new ops needs to know the currently active swap devices */
for_each_set_bit(i, a, MAX_SWAPFILES)
ops->init(i);
/*
* Setting frontswap_ops must happen after the ops->init() calls
* above; cmpxchg implies smp_mb() which will ensure the init is
* complete at this point.
*/
do {
ops->next = frontswap_ops;
} while (cmpxchg(&frontswap_ops, ops->next, ops) != ops->next);
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
static_branch_inc(&frontswap_enabled_key);
spin_lock(&swap_lock);
plist_for_each_entry(si, &swap_active_head, list) {
if (si->frontswap_map)
set_bit(si->type, b);
}
spin_unlock(&swap_lock);
/*
* On the very unlikely chance that a swap device was added or
* removed between setting the "a" list bits and the ops init
* calls, we re-check and do init or invalidate for any changed
* bits.
*/
if (unlikely(!bitmap_equal(a, b, MAX_SWAPFILES))) {
for (i = 0; i < MAX_SWAPFILES; i++) {
if (!test_bit(i, a) && test_bit(i, b))
ops->init(i);
else if (test_bit(i, a) && !test_bit(i, b))
ops->invalidate_area(i);
}
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
EXPORT_SYMBOL(frontswap_register_ops);
/*
* Enable/disable frontswap writethrough (see above).
*/
void frontswap_writethrough(bool enable)
{
frontswap_writethrough_enabled = enable;
}
EXPORT_SYMBOL(frontswap_writethrough);
frontswap: support exclusive gets if tmem backend is capable Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21 03:16:52 +08:00
/*
* Enable/disable frontswap exclusive gets (see above).
*/
void frontswap_tmem_exclusive_gets(bool enable)
{
frontswap_tmem_exclusive_gets_enabled = enable;
}
EXPORT_SYMBOL(frontswap_tmem_exclusive_gets);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* Called when a swap device is swapon'd.
*/
void __frontswap_init(unsigned type, unsigned long *map)
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
{
struct swap_info_struct *sis = swap_info[type];
struct frontswap_ops *ops;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
VM_BUG_ON(sis == NULL);
/*
* p->frontswap is a bitmap that we MUST have to figure out which page
* has gone in frontswap. Without it there is no point of continuing.
*/
if (WARN_ON(!map))
return;
/*
* Irregardless of whether the frontswap backend has been loaded
* before this function or it will be later, we _MUST_ have the
* p->frontswap set to something valid to work properly.
*/
frontswap_map_set(sis, map);
for_each_frontswap_ops(ops)
ops->init(type);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
EXPORT_SYMBOL(__frontswap_init);
bool __frontswap_test(struct swap_info_struct *sis,
pgoff_t offset)
{
if (sis->frontswap_map)
return test_bit(offset, sis->frontswap_map);
return false;
}
EXPORT_SYMBOL(__frontswap_test);
static inline void __frontswap_set(struct swap_info_struct *sis,
pgoff_t offset)
{
set_bit(offset, sis->frontswap_map);
atomic_inc(&sis->frontswap_pages);
}
static inline void __frontswap_clear(struct swap_info_struct *sis,
pgoff_t offset)
{
clear_bit(offset, sis->frontswap_map);
atomic_dec(&sis->frontswap_pages);
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* "Store" data from a page to frontswap and associate it with the page's
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
* swaptype and offset. Page must be locked and in the swap cache.
* If frontswap already contains a page with matching swaptype and
* offset, the frontswap implementation may either overwrite the data and
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
* return success or invalidate the page from frontswap and return failure.
*/
int __frontswap_store(struct page *page)
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
{
int ret = -1;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
swp_entry_t entry = { .val = page_private(page), };
int type = swp_type(entry);
struct swap_info_struct *sis = swap_info[type];
pgoff_t offset = swp_offset(entry);
struct frontswap_ops *ops;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
VM_BUG_ON(!frontswap_ops);
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(sis == NULL);
/*
* If a dup, we must remove the old page first; we can't leave the
* old page no matter if the store of the new page succeeds or fails,
* and we can't rely on the new page replacing the old page as we may
* not store to the same implementation that contains the old page.
*/
if (__frontswap_test(sis, offset)) {
__frontswap_clear(sis, offset);
for_each_frontswap_ops(ops)
ops->invalidate_page(type, offset);
}
/* Try to store in each implementation, until one succeeds. */
for_each_frontswap_ops(ops) {
ret = ops->store(type, offset, page);
if (!ret) /* successful store */
break;
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
if (ret == 0) {
__frontswap_set(sis, offset);
inc_frontswap_succ_stores();
} else {
inc_frontswap_failed_stores();
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
if (frontswap_writethrough_enabled)
/* report failure so swap also writes to swap device */
ret = -1;
return ret;
}
EXPORT_SYMBOL(__frontswap_store);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* "Get" data from frontswap associated with swaptype and offset that were
* specified when the data was put to frontswap and use it to fill the
* specified page with data. Page must be locked and in the swap cache.
*/
int __frontswap_load(struct page *page)
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
{
int ret = -1;
swp_entry_t entry = { .val = page_private(page), };
int type = swp_type(entry);
struct swap_info_struct *sis = swap_info[type];
pgoff_t offset = swp_offset(entry);
struct frontswap_ops *ops;
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
VM_BUG_ON(!frontswap_ops);
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(sis == NULL);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
if (!__frontswap_test(sis, offset))
return -1;
/* Try loading from each implementation, until one succeeds. */
for_each_frontswap_ops(ops) {
ret = ops->load(type, offset, page);
if (!ret) /* successful load */
break;
}
frontswap: support exclusive gets if tmem backend is capable Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21 03:16:52 +08:00
if (ret == 0) {
inc_frontswap_loads();
frontswap: support exclusive gets if tmem backend is capable Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21 03:16:52 +08:00
if (frontswap_tmem_exclusive_gets_enabled) {
SetPageDirty(page);
__frontswap_clear(sis, offset);
frontswap: support exclusive gets if tmem backend is capable Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21 03:16:52 +08:00
}
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
return ret;
}
EXPORT_SYMBOL(__frontswap_load);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* Invalidate any data from frontswap associated with the specified swaptype
* and offset so that a subsequent "get" will fail.
*/
void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
{
struct swap_info_struct *sis = swap_info[type];
struct frontswap_ops *ops;
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
VM_BUG_ON(!frontswap_ops);
VM_BUG_ON(sis == NULL);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
if (!__frontswap_test(sis, offset))
return;
for_each_frontswap_ops(ops)
ops->invalidate_page(type, offset);
__frontswap_clear(sis, offset);
inc_frontswap_invalidates();
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
EXPORT_SYMBOL(__frontswap_invalidate_page);
/*
* Invalidate all data from frontswap associated with all offsets for the
* specified swaptype.
*/
void __frontswap_invalidate_area(unsigned type)
{
struct swap_info_struct *sis = swap_info[type];
struct frontswap_ops *ops;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
mm, frontswap: convert frontswap_enabled to static key I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:42 +08:00
VM_BUG_ON(!frontswap_ops);
VM_BUG_ON(sis == NULL);
if (sis->frontswap_map == NULL)
return;
for_each_frontswap_ops(ops)
ops->invalidate_area(type);
atomic_set(&sis->frontswap_pages, 0);
bitmap_zero(sis->frontswap_map, sis->max);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
}
EXPORT_SYMBOL(__frontswap_invalidate_area);
static unsigned long __frontswap_curr_pages(void)
{
unsigned long totalpages = 0;
struct swap_info_struct *si = NULL;
assert_spin_locked(&swap_lock);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:09:59 +08:00
plist_for_each_entry(si, &swap_active_head, list)
totalpages += atomic_read(&si->frontswap_pages);
return totalpages;
}
static int __frontswap_unuse_pages(unsigned long total, unsigned long *unused,
int *swapid)
{
int ret = -EINVAL;
struct swap_info_struct *si = NULL;
int si_frontswap_pages;
unsigned long total_pages_to_unuse = total;
unsigned long pages = 0, pages_to_unuse = 0;
assert_spin_locked(&swap_lock);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:09:59 +08:00
plist_for_each_entry(si, &swap_active_head, list) {
si_frontswap_pages = atomic_read(&si->frontswap_pages);
if (total_pages_to_unuse < si_frontswap_pages) {
pages = pages_to_unuse = total_pages_to_unuse;
} else {
pages = si_frontswap_pages;
pages_to_unuse = 0; /* unuse all */
}
/* ensure there is enough RAM to fetch pages from frontswap */
if (security_vm_enough_memory_mm(current->mm, pages)) {
ret = -ENOMEM;
continue;
}
vm_unacct_memory(pages);
*unused = pages_to_unuse;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:09:53 +08:00
*swapid = si->type;
ret = 0;
break;
}
return ret;
}
/*
* Used to check if it's necessory and feasible to unuse pages.
* Return 1 when nothing to do, 0 when need to shink pages,
* error code when there is an error.
*/
static int __frontswap_shrink(unsigned long target_pages,
unsigned long *pages_to_unuse,
int *type)
{
unsigned long total_pages = 0, total_pages_to_unuse;
assert_spin_locked(&swap_lock);
total_pages = __frontswap_curr_pages();
if (total_pages <= target_pages) {
/* Nothing to do */
*pages_to_unuse = 0;
return 1;
}
total_pages_to_unuse = total_pages - target_pages;
return __frontswap_unuse_pages(total_pages_to_unuse, pages_to_unuse, type);
}
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* Frontswap, like a true swap device, may unnecessarily retain pages
* under certain circumstances; "shrink" frontswap is essentially a
* "partial swapoff" and works by calling try_to_unuse to attempt to
* unuse enough frontswap pages to attempt to -- subject to memory
* constraints -- reduce the number of pages in frontswap to the
* number given in the parameter target_pages.
*/
void frontswap_shrink(unsigned long target_pages)
{
unsigned long pages_to_unuse = 0;
int uninitialized_var(type), ret;
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
/*
* we don't want to hold swap_lock while doing a very
* lengthy try_to_unuse, but swap_list may change
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:09:59 +08:00
* so restart scan from swap_active_head each time
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
*/
spin_lock(&swap_lock);
ret = __frontswap_shrink(target_pages, &pages_to_unuse, &type);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
spin_unlock(&swap_lock);
if (ret == 0)
try_to_unuse(type, true, pages_to_unuse);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
return;
}
EXPORT_SYMBOL(frontswap_shrink);
/*
* Count and return the number of frontswap pages across all
* swap devices. This is exported so that backend drivers can
* determine current usage without reading debugfs.
*/
unsigned long frontswap_curr_pages(void)
{
unsigned long totalpages = 0;
spin_lock(&swap_lock);
totalpages = __frontswap_curr_pages();
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
spin_unlock(&swap_lock);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
return totalpages;
}
EXPORT_SYMBOL(frontswap_curr_pages);
static int __init init_frontswap(void)
{
#ifdef CONFIG_DEBUG_FS
struct dentry *root = debugfs_create_dir("frontswap", NULL);
if (root == NULL)
return -ENXIO;
debugfs_create_u64("loads", 0444, root, &frontswap_loads);
debugfs_create_u64("succ_stores", 0444, root, &frontswap_succ_stores);
debugfs_create_u64("failed_stores", 0444, root,
&frontswap_failed_stores);
debugfs_create_u64("invalidates", 0444, root, &frontswap_invalidates);
mm: frontswap: core frontswap functionality This patch, 3of4, provides the core frontswap code that interfaces between the hooks in the swap subsystem and a frontswap backend via frontswap_ops. --- New file added: mm/frontswap.c [v14: add support for writethrough, per suggestion by aarcange@redhat.com] [v11: sjenning@linux.vnet.ibm.com: s/puts/failed_puts/] [v10: sjenning@linux.vnet.ibm.com: fix debugfs calls on 32-bit] [v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 1] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: add comment to clarify find_next_to_unuse] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: use new static inlines, no-ops if not config'd] [v6: rebase to 3.1-rc1] [v6: lliubbo@gmail.com: use vzalloc] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v12: Squashed s/flush/invalidate/ in] [v15: A bit of cleanup and seperate DEBUGFS] Signed-off-by: Konrad Wilk <konrad.wilk@oracle.com>
2012-04-10 07:09:27 +08:00
#endif
return 0;
}
module_init(init_frontswap);