UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/fs/xfs/xfs_mount.c

1390 lines
37 KiB
C
Raw Normal View History

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:14 +08:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 11:58:39 +08:00
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include "xfs.h"
[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot. SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 11:38:42 +08:00
#include "xfs_fs.h"
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
#include "xfs_shared.h"
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:50:10 +08:00
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot. SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 11:38:42 +08:00
#include "xfs_bit.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
xfs: decouple inode and bmap btree header files Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:51:50 +08:00
#include "xfs_dir2.h"
[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot. SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 11:38:42 +08:00
#include "xfs_ialloc.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_alloc.h"
#include "xfs_rtalloc.h"
#include "xfs_bmap.h"
xfs: decouple inode and bmap btree header files Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:51:50 +08:00
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_log.h"
xfs: log shutdown triggers should only shut down the log We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-03-30 09:22:01 +08:00
#include "xfs_log_priv.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_error.h"
#include "xfs_quota.h"
#include "xfs_fsops.h"
xfs: rename xfs_sync.[ch] to xfs_icache.[ch] xfs_sync.c now only contains inode reclaim functions and inode cache iteration functions. It is not related to sync operations anymore. Rename to xfs_icache.c to reflect it's contents and prepare for consolidation with the other inode cache file that exists (xfs_iget.c). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 18:56:09 +08:00
#include "xfs_icache.h"
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 06:07:01 +08:00
#include "xfs_sysfs.h"
xfs: define the on-disk rmap btree format Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:36:07 +08:00
#include "xfs_rmap_btree.h"
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:18 +08:00
#include "xfs_refcount_btree.h"
xfs: store in-progress CoW allocations in the refcount btree Due to the way the CoW algorithm in XFS works, there's an interval during which blocks allocated to handle a CoW can be lost -- if the FS goes down after the blocks are allocated but before the block remapping takes place. This is exacerbated by the cowextsz hint -- allocated reservations can sit around for a while, waiting to get used. Since the refcount btree doesn't normally store records with refcount of 1, we can use it to record these in-progress extents. In-progress blocks cannot be shared because they're not user-visible, so there shouldn't be any conflicts with other programs. This is a better solution than holding EFIs during writeback because (a) EFIs can't be relogged currently, (b) even if they could, EFIs are bound by available log space, which puts an unnecessary upper bound on how much CoW we can have in flight, and (c) we already have a mechanism to track blocks. At mount time, read the refcount records and free anything we find with a refcount of 1 because those were in-progress when the FS went down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:39 +08:00
#include "xfs_reflink.h"
xfs: improve handling of busy extents in the low-level allocator Currently we force the log and simply try again if we hit a busy extent, but especially with online discard enabled it might take a while after the log force for the busy extents to disappear, and we might have already completed our second pass. So instead we add a new waitqueue and a generation counter to the pag structure so that we can do wakeups once we've removed busy extents, and we replace the single retry with an unconditional one - after all we hold the AGF buffer lock, so no other allocations or frees can be racing with us in this AG. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-02-08 06:06:57 +08:00
#include "xfs_extent_busy.h"
xfs: replace the BAD_SUMMARY mount flag with the equivalent health code Replace the BAD_SUMMARY mount flag with calls to the equivalent health tracking code. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-12 22:41:15 +08:00
#include "xfs_health.h"
xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-12 05:19:06 +08:00
#include "xfs_trace.h"
xfs: move xfs_perag_get/put to xfs_ag.[ch] They are AG functions, not superblock functions, so move them to the appropriate location. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02 08:48:24 +08:00
#include "xfs_ag.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
static DEFINE_MUTEX(xfs_uuid_table_mutex);
static int xfs_uuid_table_size;
static uuid_t *xfs_uuid_table;
xfs: don't leak uuid table on rmmod Don't leak the UUID table when the module is unloaded. (Found with kmemleak.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 10:06:34 +08:00
void
xfs_uuid_table_free(void)
{
if (xfs_uuid_table_size == 0)
return;
kmem_free(xfs_uuid_table);
xfs_uuid_table = NULL;
xfs_uuid_table_size = 0;
}
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
/*
* See if the UUID is unique among mounted XFS filesystems.
* Mount fails if UUID is nil or a FS with the same UUID is already mounted.
*/
STATIC int
xfs_uuid_mount(
struct xfs_mount *mp)
{
uuid_t *uuid = &mp->m_sb.sb_uuid;
int hole, i;
xfs: publish UUID in struct super_block Copy the uuid of the filesystem to struct super_block s_uuid field, as several other filesystems already do. Copy regardless of the nouuid mount option, because other filesystems also do not guaranty uniqueness of the s_uuid field in super_block struct. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-04-28 23:10:53 +08:00
/* Publish UUID in struct super_block */
fs: switch ->s_uuid to uuid_t For some file systems we still memcpy into it, but in various places this already allows us to use the proper uuid helpers. More to come.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-10 21:06:33 +08:00
uuid_copy(&mp->m_super->s_uuid, uuid);
xfs: publish UUID in struct super_block Copy the uuid of the filesystem to struct super_block s_uuid field, as several other filesystems already do. Copy regardless of the nouuid mount option, because other filesystems also do not guaranty uniqueness of the s_uuid field in super_block struct. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-04-28 23:10:53 +08:00
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (xfs_has_nouuid(mp))
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
return 0;
xfs: use the common helper uuid_is_null() Use the common helper uuid_is_null() and remove the xfs specific helper uuid_is_nil(). The common helper does not check for the NULL pointer value as xfs helper did, but xfs code never calls the helper with a pointer that can be NULL. Conform comments and warning strings to use the term 'null uuid' instead of 'nil uuid', because this is the terminology used by lib/uuid.c and its users. It is also the terminology used in userspace by libuuid and xfsprogs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> [hch: remove now unused uuid.[ch]] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-04 21:26:23 +08:00
if (uuid_is_null(uuid)) {
xfs_warn(mp, "Filesystem has null UUID - can't mount");
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -EINVAL;
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
}
mutex_lock(&xfs_uuid_table_mutex);
for (i = 0, hole = -1; i < xfs_uuid_table_size; i++) {
xfs: use the common helper uuid_is_null() Use the common helper uuid_is_null() and remove the xfs specific helper uuid_is_nil(). The common helper does not check for the NULL pointer value as xfs helper did, but xfs code never calls the helper with a pointer that can be NULL. Conform comments and warning strings to use the term 'null uuid' instead of 'nil uuid', because this is the terminology used by lib/uuid.c and its users. It is also the terminology used in userspace by libuuid and xfsprogs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> [hch: remove now unused uuid.[ch]] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-04 21:26:23 +08:00
if (uuid_is_null(&xfs_uuid_table[i])) {
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
hole = i;
continue;
}
if (uuid_equal(uuid, &xfs_uuid_table[i]))
goto out_duplicate;
}
if (hole < 0) {
xfs: remove kmem_realloc() Remove kmem_realloc() function and convert its users to use MM API directly (krealloc()) Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-08-27 05:05:56 +08:00
xfs_uuid_table = krealloc(xfs_uuid_table,
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
(xfs_uuid_table_size + 1) * sizeof(*xfs_uuid_table),
xfs: remove kmem_realloc() Remove kmem_realloc() function and convert its users to use MM API directly (krealloc()) Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-08-27 05:05:56 +08:00
GFP_KERNEL | __GFP_NOFAIL);
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
hole = xfs_uuid_table_size++;
}
xfs_uuid_table[hole] = *uuid;
mutex_unlock(&xfs_uuid_table_mutex);
return 0;
out_duplicate:
mutex_unlock(&xfs_uuid_table_mutex);
xfs: show uuid when mount fails due to duplicate uuid When a system tries to mount a filesystem (FS) using UUID, the xfs returns -EINVAL and shows a message if a FS with the same UUID has been already mounted. It is useful to output the duplicate UUID with it. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13 13:58:39 +08:00
xfs_warn(mp, "Filesystem has duplicate UUID %pU - can't mount", uuid);
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -EINVAL;
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
}
STATIC void
xfs_uuid_unmount(
struct xfs_mount *mp)
{
uuid_t *uuid = &mp->m_sb.sb_uuid;
int i;
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (xfs_has_nouuid(mp))
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
return;
mutex_lock(&xfs_uuid_table_mutex);
for (i = 0; i < xfs_uuid_table_size; i++) {
xfs: use the common helper uuid_is_null() Use the common helper uuid_is_null() and remove the xfs specific helper uuid_is_nil(). The common helper does not check for the NULL pointer value as xfs helper did, but xfs code never calls the helper with a pointer that can be NULL. Conform comments and warning strings to use the term 'null uuid' instead of 'nil uuid', because this is the terminology used by lib/uuid.c and its users. It is also the terminology used in userspace by libuuid and xfsprogs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> [hch: remove now unused uuid.[ch]] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-04 21:26:23 +08:00
if (uuid_is_null(&xfs_uuid_table[i]))
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
continue;
if (!uuid_equal(uuid, &xfs_uuid_table[i]))
continue;
memset(&xfs_uuid_table[i], 0, sizeof(uuid_t));
break;
}
ASSERT(i < xfs_uuid_table_size);
mutex_unlock(&xfs_uuid_table_mutex);
}
[XFS] Don't grow filesystems past the size they can index. When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-14 16:24:02 +08:00
/*
* Check size of device based on the (data/realtime) block count.
* Note: this check is used by the growfs code as well as mount.
*/
int
xfs_sb_validate_fsb_count(
xfs_sb_t *sbp,
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
uint64_t nblocks)
[XFS] Don't grow filesystems past the size they can index. When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-14 16:24:02 +08:00
{
ASSERT(PAGE_SHIFT >= sbp->sb_blocklog);
ASSERT(sbp->sb_blocklog >= BBSHIFT);
xfs: require 64-bit sector_t Trying to support tiny disks only and saving a bit memory might have made sense on an SGI O2 15 years ago, but is pretty pointless today. Remove the rarely tested codepath that uses various smaller in-memory types to reduce our test matrix and make the codebase a little bit smaller and less complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-30 07:12:05 +08:00
/* Limited by ULONG_MAX of page cache index */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (nblocks >> (PAGE_SHIFT - sbp->sb_blocklog) > ULONG_MAX)
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -EFBIG;
[XFS] Don't grow filesystems past the size they can index. When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-14 16:24:02 +08:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* xfs_readsb
*
* Does the initial read of the superblock.
*/
int
xfs: introduce xfs_sb.c for sharing with libxfs xfs_mount.c is shared with userspace, but the only functions that are shared are to do with physical superblock manipulations. This means that less than 25% of the xfs_mount.c code is actually shared with userspace. Move all the superblock functions to xfs_sb.c and share that instead with libxfs. Note that this will leave all the in-core transaction related superblock counter modifications in xfs_mount.c as none of that is shared with userspace. With a few more small changes, xfs_mount.h won't need to be shared with userspace anymore, either. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 18:49:41 +08:00
xfs_readsb(
struct xfs_mount *mp,
int flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned int sector_size;
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:31 +08:00
struct xfs_buf *bp;
struct xfs_sb *sbp = &mp->m_sb;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int error;
xfs: kill xfs_fs_mount_cmn_err() macro The xfs_fs_mount_cmn_err() hides a simple check as to whether the mount path should output an error or not. Remove the macro and open code the check. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:04:35 +08:00
int loud = !(flags & XFS_MFSI_QUIET);
xfs: skip verification on initial "guess" superblock read When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-19 12:39:16 +08:00
const struct xfs_buf_ops *buf_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(mp->m_sb_bp == NULL);
ASSERT(mp->m_ddev_targp != NULL);
xfs: skip verification on initial "guess" superblock read When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-19 12:39:16 +08:00
/*
* For the initial read, we must guess at the sector
* size based on the block device. It's enough to
* get the sb_sectsize out of the superblock and
* then reread with the proper length.
* We don't verify it yet, because it may not be complete.
*/
sector_size = xfs_getsize_buftarg(mp->m_ddev_targp);
buf_ops = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
xfs: exclude never-released buffers from buftarg I/O accounting The upcoming buftarg I/O accounting mechanism maintains a count of all buffers that have undergone I/O in the current hold-release cycle. Certain buffers associated with core infrastructure (e.g., the xfs_mount superblock buffer, log buffers) are never released, however. This means that accounting I/O submission on such buffers elevates the buftarg count indefinitely and could lead to lockup on unmount. Define a new buffer flag to explicitly exclude buffers from buftarg I/O accounting. Set the flag on the superblock and associated log buffers. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-07-20 09:13:43 +08:00
* Allocate a (locked) buffer to hold the superblock. This will be kept
* around at all times to optimize access to the superblock. Therefore,
* set XBF_NO_IOACCT to make sure it doesn't hold the buftarg count
* elevated.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
reread:
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
error = xfs_buf_read_uncached(mp->m_ddev_targp, XFS_SB_DADDR,
xfs: exclude never-released buffers from buftarg I/O accounting The upcoming buftarg I/O accounting mechanism maintains a count of all buffers that have undergone I/O in the current hold-release cycle. Certain buffers associated with core infrastructure (e.g., the xfs_mount superblock buffer, log buffers) are never released, however. This means that accounting I/O submission on such buffers elevates the buftarg count indefinitely and could lead to lockup on unmount. Define a new buffer flag to explicitly exclude buffers from buftarg I/O accounting. Set the flag on the superblock and associated log buffers. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-07-20 09:13:43 +08:00
BTOBB(sector_size), XBF_NO_IOACCT, &bp,
buf_ops);
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
if (error) {
xfs: uncached buffer reads need to return an error With verification being done as an IO completion callback, different errors can be returned from a read. Uncached reads only return a buffer or NULL on failure, which means the verification error cannot be returned to the caller. Split the error handling for these reads into two - a failure to get a buffer will still return NULL, but a read error will return a referenced buffer with b_error set rather than NULL. The caller is responsible for checking the error state of the buffer returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-12 19:54:02 +08:00
if (loud)
xfs: implement extended feature masks The version 5 superblock has extended feature masks for compatible, incompatible and read-only compatible feature sets. Implement the masking and mount-time checking for these feature masks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:32 +08:00
xfs_warn(mp, "SB validate failed with error %d.", error);
xfs: don't leak EFSBADCRC to userspace While the verifier routines may return EFSBADCRC when a buffer has a bad CRC, we need to translate that to EFSCORRUPTED so that the higher layers treat the error appropriately and we return a consistent error to userspace. This fixes a xfs/005 regression. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-07 13:19:14 +08:00
/* bad CRC means corrupted metadata */
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
if (error == -EFSBADCRC)
error = -EFSCORRUPTED;
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
return error;
xfs: uncached buffer reads need to return an error With verification being done as an IO completion callback, different errors can be returned from a read. Uncached reads only return a buffer or NULL on failure, which means the verification error cannot be returned to the caller. Split the error handling for these reads into two - a failure to get a buffer will still return NULL, but a read error will return a referenced buffer with b_error set rather than NULL. The caller is responsible for checking the error state of the buffer returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-12 19:54:02 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Initialize the mount structure from the superblock.
*/
xfs: remove XFS_BUF_TO_SBP Just dereference bp->b_addr directly and make the code a little simpler and more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-10 23:57:30 +08:00
xfs_sb_from_disk(sbp, bp->b_addr);
xfs: xfs_readsb needs to check for magic numbers Commit daba542 ("xfs: skip verification on initial "guess" superblock read") dropped the use of a verifier for the initial superblock read so we can probe the sector size of the filesystem stored in the superblock. It, however, now fails to validate that what was read initially is actually an XFS superblock and hence will fail the sector size check and return ENOSYS. This causes probe-based mounts to fail because it expects XFS to return EINVAL when it doesn't recognise the superblock format. cc: <stable@vger.kernel.org> Reported-by: Plamen Petrov <plamen.sisi@gmail.com> Tested-by: Plamen Petrov <plamen.sisi@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 14:00:43 +08:00
/*
* If we haven't validated the superblock, do so now before we try
* to check the sector size and reread the superblock appropriately.
*/
if (sbp->sb_magicnum != XFS_SB_MAGIC) {
if (loud)
xfs_warn(mp, "Invalid superblock magic number");
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
error = -EINVAL;
xfs: xfs_readsb needs to check for magic numbers Commit daba542 ("xfs: skip verification on initial "guess" superblock read") dropped the use of a verifier for the initial superblock read so we can probe the sector size of the filesystem stored in the superblock. It, however, now fails to validate that what was read initially is actually an XFS superblock and hence will fail the sector size check and return ENOSYS. This causes probe-based mounts to fail because it expects XFS to return EINVAL when it doesn't recognise the superblock format. cc: <stable@vger.kernel.org> Reported-by: Plamen Petrov <plamen.sisi@gmail.com> Tested-by: Plamen Petrov <plamen.sisi@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 14:00:43 +08:00
goto release_buf;
}
xfs: introduce xfs_sb.c for sharing with libxfs xfs_mount.c is shared with userspace, but the only functions that are shared are to do with physical superblock manipulations. This means that less than 25% of the xfs_mount.c code is actually shared with userspace. Move all the superblock functions to xfs_sb.c and share that instead with libxfs. Note that this will leave all the in-core transaction related superblock counter modifications in xfs_mount.c as none of that is shared with userspace. With a few more small changes, xfs_mount.h won't need to be shared with userspace anymore, either. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 18:49:41 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* We must be able to do sector-sized and sector-aligned IO.
*/
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:31 +08:00
if (sector_size > sbp->sb_sectsize) {
xfs: kill xfs_fs_mount_cmn_err() macro The xfs_fs_mount_cmn_err() hides a simple check as to whether the mount path should output an error or not. Remove the macro and open code the check. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:04:35 +08:00
if (loud)
xfs_warn(mp, "device supports %u byte sectors (not %u)",
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:31 +08:00
sector_size, sbp->sb_sectsize);
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
error = -ENOSYS;
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
goto release_buf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: skip verification on initial "guess" superblock read When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-19 12:39:16 +08:00
if (buf_ops == NULL) {
xfs: xfs_readsb needs to check for magic numbers Commit daba542 ("xfs: skip verification on initial "guess" superblock read") dropped the use of a verifier for the initial superblock read so we can probe the sector size of the filesystem stored in the superblock. It, however, now fails to validate that what was read initially is actually an XFS superblock and hence will fail the sector size check and return ENOSYS. This causes probe-based mounts to fail because it expects XFS to return EINVAL when it doesn't recognise the superblock format. cc: <stable@vger.kernel.org> Reported-by: Plamen Petrov <plamen.sisi@gmail.com> Tested-by: Plamen Petrov <plamen.sisi@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 14:00:43 +08:00
/*
* Re-read the superblock so the buffer is correctly sized,
* and properly verified.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_buf_relse(bp);
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:31 +08:00
sector_size = sbp->sb_sectsize;
xfs: skip verification on initial "guess" superblock read When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-19 12:39:16 +08:00
buf_ops = loud ? &xfs_sb_buf_ops : &xfs_sb_quiet_buf_ops;
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
goto reread;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: reflect sb features in xfs_mount Currently on-disk feature checks require decoding the superblock fileds and so can be non-trivial. We have almost 400 hundred individual feature checks in the XFS code, so this is a significant amount of code. To reduce runtime check overhead, pre-process all the version flags into a features field in the xfs_mount at mount time so we can convert all the feature checks to a simple flag check. There is also a need to convert the dynamic feature flags to update the m_features field. This is required for attr, attr2 and quota features. New xfs_mount based wrappers are added for this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:26 +08:00
mp->m_features |= xfs_sb_version_to_features(sbp);
xfs: Remove icsb infrastructure Now that the in-core superblock infrastructure has been replaced with generic per-cpu counters, we don't need it anymore. Nuke it from orbit so we are sure that it won't haunt us again... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:31 +08:00
xfs_reinit_percpu_counters(mp);
[XFS] On machines with more than 8 cpus, when running parallel I/O threads, the incore superblock lock becomes the limiting factor for buffered write throughput. Make the contended fields in the incore superblock use per-cpu counters so that there is no global lock to limit scalability. SGI-PV: 946630 SGI-Modid: xfs-linux-melb:xfs-kern:25106a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-14 10:13:09 +08:00
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 13:11:31 +08:00
/* no need to be quiet anymore, so reset the buf ops */
bp->b_ops = &xfs_sb_buf_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mp->m_sb_bp = bp;
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
xfs_buf_unlock(bp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
release_buf:
xfs_buf_relse(bp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return error;
}
xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-12 05:19:06 +08:00
/*
* If the sunit/swidth change would move the precomputed root inode value, we
* must reject the ondisk change because repair will stumble over that.
* However, we allow the mount to proceed because we never rejected this
* combination before. Returns true to update the sb, false otherwise.
*/
static inline int
xfs_check_new_dalign(
struct xfs_mount *mp,
int new_dalign,
bool *update_sb)
{
struct xfs_sb *sbp = &mp->m_sb;
xfs_ino_t calc_ino;
calc_ino = xfs_ialloc_calc_rootino(mp, new_dalign);
trace_xfs_check_new_dalign(mp, new_dalign, calc_ino);
if (sbp->sb_rootino == calc_ino) {
*update_sb = true;
return 0;
}
xfs_warn(mp,
"Cannot change stripe alignment; would require moving root inode.");
/*
* XXX: Next time we add a new incompat feature, this should start
* returning -EINVAL to fail the mount. Until then, spit out a warning
* that we're ignoring the administrator's instructions.
*/
xfs_warn(mp, "Skipping superblock stripe alignment update.");
*update_sb = false;
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
* If we were provided with new sunit/swidth values as mount options, make sure
* that they pass basic alignment and superblock feature checks, and convert
* them into the same units (FSB) that everything else expects. This step
* /must/ be done before computing the inode geometry.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
STATIC int
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
xfs_validate_new_dalign(
struct xfs_mount *mp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
if (mp->m_dalign == 0)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
/*
* If stripe unit and stripe width are not multiples
* of the fs blocksize turn off alignment.
*/
if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
(BBTOB(mp->m_swidth) & mp->m_blockmask)) {
xfs_warn(mp,
"alignment check failed: sunit/swidth vs. blocksize(%d)",
mp->m_sb.sb_blocksize);
return -EINVAL;
}
xfs: simplify if-else condition in xfs_validate_new_dalign "else" is not generally useful after a return, so remove them which makes if condition a bit more clear. There is no logical changes. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-09-19 04:49:14 +08:00
/*
* Convert the stripe unit and width to FSBs.
*/
mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
if (mp->m_dalign && (mp->m_sb.sb_agblocks % mp->m_dalign)) {
xfs_warn(mp,
"alignment check failed: sunit/swidth vs. agsize(%d)",
mp->m_sb.sb_agblocks);
return -EINVAL;
}
if (!mp->m_dalign) {
xfs_warn(mp,
"alignment check failed: sunit(%d) less than bsize(%d)",
mp->m_dalign, mp->m_sb.sb_blocksize);
return -EINVAL;
}
mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:37 +08:00
if (!xfs_has_dalign(mp)) {
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
xfs_warn(mp,
"cannot change alignment: superblock does not support data alignment");
return -EINVAL;
}
return 0;
}
/* Update alignment values based on mount options and sb values. */
STATIC int
xfs_update_alignment(
struct xfs_mount *mp)
{
struct xfs_sb *sbp = &mp->m_sb;
if (mp->m_dalign) {
xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-12 05:19:06 +08:00
bool update_sb;
int error;
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
if (sbp->sb_unit == mp->m_dalign &&
sbp->sb_width == mp->m_swidth)
return 0;
xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-12 05:19:06 +08:00
error = xfs_check_new_dalign(mp, mp->m_dalign, &update_sb);
if (error || !update_sb)
return error;
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
sbp->sb_unit = mp->m_dalign;
sbp->sb_width = mp->m_swidth;
mp->m_update_sb = true;
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
} else if (!xfs_has_noalign(mp) && xfs_has_dalign(mp)) {
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
mp->m_dalign = sbp->sb_unit;
mp->m_swidth = sbp->sb_width;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
/*
* precalculate the low space thresholds for dynamic speculative preallocation.
*/
void
xfs_set_low_space_thresholds(
struct xfs_mount *mp)
{
xfs: queue inactivation immediately when free realtime extents are tight Now that we have made the inactivation of unlinked inodes a background task to increase the throughput of file deletions, we need to be a little more careful about how long of a delay we can tolerate. Similar to the patch doing this for free space on the data device, if the file being inactivated is a realtime file and the realtime volume is running low on free extents, we want to run the worker ASAP so that the realtime allocator can make better decisions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:41 +08:00
uint64_t dblocks = mp->m_sb.sb_dblocks;
uint64_t rtexts = mp->m_sb.sb_rextents;
int i;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
xfs: queue inactivation immediately when free realtime extents are tight Now that we have made the inactivation of unlinked inodes a background task to increase the throughput of file deletions, we need to be a little more careful about how long of a delay we can tolerate. Similar to the patch doing this for free space on the data device, if the file being inactivated is a realtime file and the realtime volume is running low on free extents, we want to run the worker ASAP so that the realtime allocator can make better decisions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:41 +08:00
do_div(dblocks, 100);
do_div(rtexts, 100);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
xfs: queue inactivation immediately when free realtime extents are tight Now that we have made the inactivation of unlinked inodes a background task to increase the throughput of file deletions, we need to be a little more careful about how long of a delay we can tolerate. Similar to the patch doing this for free space on the data device, if the file being inactivated is a realtime file and the realtime volume is running low on free extents, we want to run the worker ASAP so that the realtime allocator can make better decisions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:41 +08:00
for (i = 0; i < XFS_LOWSP_MAX; i++) {
mp->m_low_space[i] = dblocks * (i + 1);
mp->m_low_rtexts[i] = rtexts * (i + 1);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
}
}
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
/*
xfs: fix the comment of xfs_check_sizes() Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-07 18:10:58 +08:00
* Check that the data (and log if separate) is an ok size.
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
*/
STATIC int
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
xfs_check_sizes(
struct xfs_mount *mp)
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
{
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
struct xfs_buf *bp;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
xfs_daddr_t d;
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
int error;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "filesystem size mismatch detected");
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -EFBIG;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
error = xfs_buf_read_uncached(mp->m_ddev_targp,
xfs: use unhashed buffers for size checks When we are checking we can access the last block of each device, we do not need to use cached buffers as they will be tossed away immediately. Use uncached buffers for size checks so that all IO prior to full in-memory structure initialisation does not use the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
d - XFS_FSS_TO_BB(mp, 1),
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
XFS_FSS_TO_BB(mp, 1), 0, &bp, NULL);
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "last sector read failed");
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: use unhashed buffers for size checks When we are checking we can access the last block of each device, we do not need to use cached buffers as they will be tossed away immediately. Use uncached buffers for size checks so that all IO prior to full in-memory structure initialisation does not use the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
xfs_buf_relse(bp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
if (mp->m_logdev_targp == mp->m_ddev_targp)
return 0;
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
xfs_warn(mp, "log size mismatch detected");
return -EFBIG;
}
error = xfs_buf_read_uncached(mp->m_logdev_targp,
xfs: use unhashed buffers for size checks When we are checking we can access the last block of each device, we do not need to use cached buffers as they will be tossed away immediately. Use uncached buffers for size checks so that all IO prior to full in-memory structure initialisation does not use the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
d - XFS_FSB_TO_BB(mp, 1),
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
XFS_FSB_TO_BB(mp, 1), 0, &bp, NULL);
if (error) {
xfs_warn(mp, "log device read failed");
return error;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
}
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-02 07:05:32 +08:00
xfs_buf_relse(bp);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
return 0;
}
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
/*
* Clear the quotaflags in memory and in the superblock.
*/
int
xfs_mount_reset_sbqflags(
struct xfs_mount *mp)
{
mp->m_qflags = 0;
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
/* It is OK to look at sb_qflags in the mount path without m_sb_lock. */
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (mp->m_sb.sb_qflags == 0)
return 0;
spin_lock(&mp->m_sb_lock);
mp->m_sb.sb_qflags = 0;
spin_unlock(&mp->m_sb_lock);
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
if (!xfs_fs_writable(mp, SB_FREEZE_WRITE))
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
return 0;
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
return xfs_sync_sb(mp, false);
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
}
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
uint64_t
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
xfs_default_resblks(xfs_mount_t *mp)
{
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
uint64_t resblks;
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
/*
xfs: Increase the default size of the reserved blocks pool The current default size of the reserved blocks pool is easy to deplete with certain workloads, in particular workloads that do lots of concurrent delayed allocation extent conversions. If enough transactions are running in parallel and the entire pool is consumed then subsequent calls to xfs_trans_reserve() will fail with ENOSPC. Also add a rate limited warning so we know if this starts happening again. This is an updated version of an old patch from Lachlan McIlroy. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-04 09:46:25 +08:00
* We default to 5% or 8192 fsbs of space reserved, whichever is
* smaller. This is intended to cover concurrent allocation
* transactions when we initially hit enospc. These each require a 4
* block reservation. Hence by default we cover roughly 2000 concurrent
* allocation reservations.
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
*/
resblks = mp->m_sb.sb_dblocks;
do_div(resblks, 20);
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
resblks = min_t(uint64_t, resblks, 8192);
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
return resblks;
}
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
/* Ensure the summary counts are correct. */
STATIC int
xfs_check_summary_counts(
struct xfs_mount *mp)
{
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
int error = 0;
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
/*
* The AG0 superblock verifier rejects in-progress filesystems,
* so we should never see the flag set this far into mounting.
*/
if (mp->m_sb.sb_inprogress) {
xfs_err(mp, "sb_inprogress set after log recovery??");
WARN_ON(1);
return -EFSCORRUPTED;
}
/*
* Now the log is mounted, we know if it was an unclean shutdown or
* not. If it was, with the first phase of recovery has completed, we
* have consistent AG blocks on disk. We have not recovered EFIs yet,
* but they are recovered transactionally in the second recovery phase
* later.
*
* If the log was clean when we mounted, we can check the summary
* counters. If any of them are obviously incorrect, we can recompute
* them from the AGF headers in the next step.
*/
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (xfs_is_clean(mp) &&
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
(mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks ||
xfs: recalculate summary counters at mount time if icount is bad Since the sb write verifier trips on bad icounts, we should also force a mount time recalculation of the summary counters if the icount is bad. This helps us avoid blowing up at freeze/unmount time when the bad counter gets written back out. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2018-08-11 08:55:56 +08:00
!xfs_verify_icount(mp, mp->m_sb.sb_icount) ||
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
mp->m_sb.sb_ifree > mp->m_sb.sb_icount))
xfs: replace the BAD_SUMMARY mount flag with the equivalent health code Replace the BAD_SUMMARY mount flag with calls to the equivalent health tracking code. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-12 22:41:15 +08:00
xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS);
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
/*
* We can safely re-initialise incore superblock counters from the
* per-ag data. These may not be correct if the filesystem was not
* cleanly unmounted, so we waited for recovery to finish before doing
* this.
*
* If the filesystem was cleanly unmounted or the previous check did
* not flag anything weird, then we can trust the values in the
* superblock to be correct and we don't need to do anything here.
* Otherwise, recalculate the summary counters.
*/
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
if ((xfs_has_lazysbcount(mp) && !xfs_is_clean(mp)) ||
xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) {
error = xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount);
if (error)
return error;
}
/*
* Older kernels misused sb_frextents to reflect both incore
* reservations made by running transactions and the actual count of
* free rt extents in the ondisk metadata. Transactions committed
* during runtime can therefore contain a superblock update that
* undercounts the number of free rt extents tracked in the rt bitmap.
* A clean unmount record will have the correct frextents value since
* there can be no other transactions running at that point.
*
* If we're mounting the rt volume after recovering the log, recompute
* frextents from the rtbitmap file to fix the inconsistency.
*/
if (xfs_has_realtime(mp) && !xfs_is_clean(mp)) {
error = xfs_rtalloc_reinit_frextents(mp);
if (error)
return error;
}
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
return 0;
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-20 03:29:13 +08:00
}
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
/*
* Flush and reclaim dirty inodes in preparation for unmount. Inodes and
* internal inode structures can be sitting in the CIL and AIL at this point,
* so we need to unpin them, write them back and/or reclaim them before unmount
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
* can proceed. In other words, callers are required to have inactivated all
* inodes.
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
*
* An inode cluster that has been freed can have its buffer still pinned in
* memory because the transaction is still sitting in a iclog. The stale inodes
* on that buffer will be pinned to the buffer until the transaction hits the
* disk and the callbacks run. Pushing the AIL will skip the stale inodes and
* may never see the pinned buffer, so nothing will push out the iclog and
* unpin the buffer.
*
* Hence we need to force the log to unpin everything first. However, log
* forces don't wait for the discards they issue to complete, so we have to
* explicitly wait for them to complete here as well.
*
* Then we can tell the world we are unmounting so that error handling knows
* that the filesystem is going away and we should error out anything that we
* have been retrying in the background. This will prevent never-ending
* retries in AIL pushing from hanging the unmount.
*
* Finally, we can push the AIL to clean all the remaining dirty objects, then
* reclaim the remaining inodes that are still in memory at this point in time.
*/
static void
xfs_unmount_flush_inodes(
struct xfs_mount *mp)
{
xfs_log_force(mp, XFS_LOG_SYNC);
xfs_extent_busy_wait_all(mp);
flush_workqueue(xfs_discard_wq);
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
set_bit(XFS_OPSTATE_UNMOUNTING, &mp->m_opstate);
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
xfs_ail_push_all_sync(mp->m_ail);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
xfs_inodegc_stop(mp);
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
cancel_delayed_work_sync(&mp->m_reclaim_work);
xfs_reclaim_inodes(mp);
xfs_health_unmount(mp);
}
xfs: precalculate default inode attribute offset Default attr fork offset is based on inode size, so is a fixed geometry parameter of the inode. Move it to the xfs_ino_geometry structure and stop calculating it on every call to xfs_default_attroffset(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2021-04-06 22:03:24 +08:00
static void
xfs_mount_setup_inode_geom(
struct xfs_mount *mp)
{
struct xfs_ino_geometry *igeo = M_IGEO(mp);
igeo->attr_fork_offset = xfs_bmap_compute_attr_offset(mp);
ASSERT(igeo->attr_fork_offset < XFS_LITINO(mp));
xfs_ialloc_setup_geometry(mp);
}
xfs: compute maximum AG btree height for critical reservation calculation Compute the actual maximum AG btree height for deciding if a per-AG block reservation is critically low. This only affects the sanity check condition, since we /generally/ will trigger on the 10% threshold. This is a long-winded way of saying that we're removing one more usage of XFS_BTREE_MAXLEVELS. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-09-17 03:27:34 +08:00
/* Compute maximum possible height for per-AG btree types for this fs. */
static inline void
xfs_agbtree_compute_maxlevels(
struct xfs_mount *mp)
{
unsigned int levels;
levels = max(mp->m_alloc_maxlevels, M_IGEO(mp)->inobt_maxlevels);
levels = max(levels, mp->m_rmap_maxlevels);
mp->m_agbtree_maxlevels = max(levels, mp->m_refc_maxlevels);
}
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
/*
* This function does the following on an initial mount of a file system:
* - reads the superblock from disk and init the mount struct
* - if we're a 32-bit kernel, do a size check on the superblock
* so we don't mount terabyte filesystems
* - init mount struct realtime fields
* - allocate inode hash table for fs
* - init directory manager
* - perform recovery and init the log manager
*/
int
xfs_mountfs(
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
struct xfs_mount *mp)
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
{
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
struct xfs_sb *sbp = &(mp->m_sb);
struct xfs_inode *rip;
xfs: separate inode geometry Separate the inode geometry information into a distinct structure. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-06 02:19:34 +08:00
struct xfs_ino_geometry *igeo = M_IGEO(mp);
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
uint64_t resblks;
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
uint quotamount = 0;
uint quotaflags = 0;
int error = 0;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
xfs: introduce xfs_sb.c for sharing with libxfs xfs_mount.c is shared with userspace, but the only functions that are shared are to do with physical superblock manipulations. This means that less than 25% of the xfs_mount.c code is actually shared with userspace. Move all the superblock functions to xfs_sb.c and share that instead with libxfs. Note that this will leave all the in-core transaction related superblock counter modifications in xfs_mount.c as none of that is shared with userspace. With a few more small changes, xfs_mount.h won't need to be shared with userspace anymore, either. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 18:49:41 +08:00
xfs_sb_mount_common(mp, sbp);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06 10:45:50 +08:00
/*
xfs: sanitise sb_bad_features2 handling We currently have to ensure that every time we update sb_features2 that we update sb_bad_features2. Now that we log and format the superblock in it's entirety we actually don't have to care because we can simply update the sb_bad_features2 when we format it into the buffer. This removes the need for anything but the mount and superblock formatting code to care about sb_bad_features2, and hence removes the possibility that we forget to update bad_features2 when necessary in the future. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:33 +08:00
* Check for a mismatched features2 values. Older kernels read & wrote
* into the wrong sb offset for sb_features2 on some platforms due to
* xfs_sb_t not being 64bit size aligned when sb_features2 was added,
* which made older superblock reading/writing routines swap it as a
* 64-bit value.
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06 10:45:50 +08:00
*
[XFS] Ensure "both" features2 slots are consistent Since older kernels may look in the sb_bad_features2 slot for flags, rather than zeroing it out on fixup, we should make it equal to the sb_features2 value. Also, if the ATTR2 flag was not found prior to features2 fixup, it was not set in the mount flags, so re-check after the fixup so that the current session will use the feature. Also fix up the comments to reflect these changes. SGI-PV: 980085 SGI-Modid: xfs-linux-melb:xfs-kern:30778a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:19:34 +08:00
* For backwards compatibility, we make both slots equal.
*
xfs: sanitise sb_bad_features2 handling We currently have to ensure that every time we update sb_features2 that we update sb_bad_features2. Now that we log and format the superblock in it's entirety we actually don't have to care because we can simply update the sb_bad_features2 when we format it into the buffer. This removes the need for anything but the mount and superblock formatting code to care about sb_bad_features2, and hence removes the possibility that we forget to update bad_features2 when necessary in the future. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:33 +08:00
* If we detect a mismatched field, we OR the set bits into the existing
* features2 field in case it has already been modified; we don't want
* to lose any features. We then update the bad location with the ORed
* value so that older kernels will see any features2 flags. The
* superblock writeback code ensures the new sb_features2 is copied to
* sb_bad_features2 before it is logged or written to disk.
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06 10:45:50 +08:00
*/
[XFS] Ensure "both" features2 slots are consistent Since older kernels may look in the sb_bad_features2 slot for flags, rather than zeroing it out on fixup, we should make it equal to the sb_features2 value. Also, if the ATTR2 flag was not found prior to features2 fixup, it was not set in the mount flags, so re-check after the fixup so that the current session will use the feature. Also fix up the comments to reflect these changes. SGI-PV: 980085 SGI-Modid: xfs-linux-melb:xfs-kern:30778a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:19:34 +08:00
if (xfs_sb_has_mismatched_features2(sbp)) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "correcting sb_features alignment problem");
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06 10:45:50 +08:00
sbp->sb_features2 |= sbp->sb_bad_features2;
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
mp->m_update_sb = true;
[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields. Previously, mounting with noattr2 failed to achieve anything because although it cleared the attr2 mount flag, it would set it again as soon as it processed the superblock fields. The fix now has an explicit noattr2 flag and uses it later to fix up the versionnum and features2 fields. SGI-PV: 980021 SGI-Modid: xfs-linux-melb:xfs-kern:31003a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-30 16:15:28 +08:00
}
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06 10:45:50 +08:00
xfs: turn NLINK feature on by default mkfs has turned on the XFS_SB_VERSION_NLINKBIT feature bit by default since November 2007. It's about time we simply made the kernel code turn it on by default and so always convert v1 inodes to v2 inodes when reading them in from disk or allocating them. This This removes needless version checks and modification when bumping link counts on inodes, and will take code out of a few common code paths. text data bss dec hex filename 783251 100867 616 884734 d7ffe fs/xfs/xfs.o.orig 782664 100867 616 884147 d7db3 fs/xfs/xfs.o.patched Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 05:46:40 +08:00
/* always use v2 inodes by default now */
if (!(mp->m_sb.sb_versionnum & XFS_SB_VERSION_NLINKBIT)) {
mp->m_sb.sb_versionnum |= XFS_SB_VERSION_NLINKBIT;
xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:37 +08:00
mp->m_features |= XFS_FEAT_NLINK;
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
mp->m_update_sb = true;
xfs: turn NLINK feature on by default mkfs has turned on the XFS_SB_VERSION_NLINKBIT feature bit by default since November 2007. It's about time we simply made the kernel code turn it on by default and so always convert v1 inodes to v2 inodes when reading them in from disk or allocating them. This This removes needless version checks and modification when bumping link counts on inodes, and will take code out of a few common code paths. text data bss dec hex filename 783251 100867 616 884734 d7ffe fs/xfs/xfs.o.orig 782664 100867 616 884147 d7db3 fs/xfs/xfs.o.patched Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 05:46:40 +08:00
}
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
/*
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
* If we were given new sunit/swidth options, do some basic validation
* checks and convert the incore dalign and swidth values to the
* same units (FSB) that everything else uses. This /must/ happen
* before computing the inode geometry.
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
*/
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
error = xfs_validate_new_dalign(mp);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
if (error)
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
xfs_alloc_compute_maxlevels(mp);
xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
xfs: precalculate default inode attribute offset Default attr fork offset is based on inode size, so is a fixed geometry parameter of the inode. Move it to the xfs_ino_geometry structure and stop calculating it on every call to xfs_default_attroffset(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2021-04-06 22:03:24 +08:00
xfs_mount_setup_inode_geom(mp);
xfs: define the on-disk rmap btree format Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:36:07 +08:00
xfs_rmapbt_compute_maxlevels(mp);
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:18 +08:00
xfs_refcountbt_compute_maxlevels(mp);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
xfs: compute maximum AG btree height for critical reservation calculation Compute the actual maximum AG btree height for deciding if a per-AG block reservation is critically low. This only affects the sanity check condition, since we /generally/ will trigger on the 10% threshold. This is a long-winded way of saying that we're removing one more usage of XFS_BTREE_MAXLEVELS. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-09-17 03:27:34 +08:00
xfs_agbtree_compute_maxlevels(mp);
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 03:13:16 +08:00
/*
* Check if sb_agblocks is aligned at stripe boundary. If sb_agblocks
* is NOT aligned turn off m_dalign since allocator alignment is within
* an ag, therefore ag has to be aligned at stripe boundary. Note that
* we must compute the free space and rmap btree geometry before doing
* this.
*/
error = xfs_update_alignment(mp);
if (error)
goto out;
xfs: add "fail at unmount" error handling configuration If we take "retry forever" literally on metadata IO errors, we can hang at unmount, once it retries those writes forever. This is the default behavior, unfortunately. Add an error configuration option for this behavior and default it to "fail" so that an unmount will trigger actuall errors, a shutdown and allow the unmount to succeed. It will be noisy, though, as it will log the errors and shutdown that occurs. To fix this, we need to mark the filesystem as being in the process of unmounting. Do this with a mount flag that is added at the appropriate time (i.e. before the blocking AIL sync). We also need to add this flag if mount fails after the initial phase of log recovery has been run. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 09:11:27 +08:00
/* enable fail_at_unmount as default */
xfs: Fix bool initialization/comparison Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-10-10 02:38:54 +08:00
mp->m_fail_unmount = true;
xfs: add "fail at unmount" error handling configuration If we take "retry forever" literally on metadata IO errors, we can hang at unmount, once it retries those writes forever. This is the default behavior, unfortunately. Add an error configuration option for this behavior and default it to "fail" so that an unmount will trigger actuall errors, a shutdown and allow the unmount to succeed. It will be noisy, though, as it will log the errors and shutdown that occurs. To fix this, we need to mark the filesystem as being in the process of unmounting. Do this with a mount flag that is added at the appropriate time (i.e. before the blocking AIL sync). We also need to add this flag if mount fails after the initial phase of log recovery has been run. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 09:11:27 +08:00
xfs: use super s_id instead of struct xfs_mount m_fsname Eliminate struct xfs_mount field m_fsname by using the super block s_id field directly. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-11-05 05:58:40 +08:00
error = xfs_sysfs_init(&mp->m_kobj, &xfs_mp_ktype,
NULL, mp->m_super->s_id);
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
if (error)
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: per-filesystem stats in sysfs This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 15:21:19 +08:00
error = xfs_sysfs_init(&mp->m_stats.xs_kobj, &xfs_stats_ktype,
&mp->m_kobj, "stats");
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 06:07:01 +08:00
if (error)
goto out_remove_sysfs;
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 08:58:51 +08:00
error = xfs_error_sysfs_init(mp);
xfs: per-filesystem stats in sysfs This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 15:21:19 +08:00
if (error)
goto out_del_stats;
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-21 08:54:46 +08:00
error = xfs_errortag_init(mp);
if (error)
goto out_remove_error_sysfs;
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 08:58:51 +08:00
error = xfs_uuid_mount(mp);
if (error)
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-21 08:54:46 +08:00
goto out_remove_errortag;
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 08:58:51 +08:00
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
/*
xfs: simplify parsing of allocsize mount option Rework xfs_parseargs to fill out the default value and then parse the option directly into the mount structure, similar to what we do for other updates, and open code the now trivial updates based on on the on-disk superblock directly into xfs_mountfs. Note that this change rejects the allocsize=0 mount option that has been documented as invalid for a long time instead of just ignoring it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-28 23:41:45 +08:00
* Update the preferred write size based on the information from the
* on-disk superblock.
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
*/
xfs: simplify parsing of allocsize mount option Rework xfs_parseargs to fill out the default value and then parse the option directly into the mount structure, similar to what we do for other updates, and open code the now trivial updates based on on the on-disk superblock directly into xfs_mountfs. Note that this change rejects the allocsize=0 mount option that has been documented as invalid for a long time instead of just ignoring it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-28 23:41:45 +08:00
mp->m_allocsize_log =
max_t(uint32_t, sbp->sb_blocklog, mp->m_allocsize_log);
mp->m_allocsize_blocks = 1U << (mp->m_allocsize_log - sbp->sb_blocklog);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
/* set the low space thresholds for dynamic preallocation */
xfs_set_low_space_thresholds(mp);
xfs: sparse inode chunks feature helpers and mount requirements The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:57:27 +08:00
/*
* If enabled, sparse inode chunk alignment is expected to match the
* cluster size. Full inode chunk alignment must match the chunk size,
* but that is checked on sb read verification...
*/
xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:37 +08:00
if (xfs_has_sparseinodes(mp) &&
xfs: sparse inode chunks feature helpers and mount requirements The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:57:27 +08:00
mp->m_sb.sb_spino_align !=
xfs: fix inode_cluster_size rounding mayhem inode_cluster_size is supposed to represent the size (in bytes) of an inode cluster buffer. We avoid having to handle multiple clusters per filesystem block on filesystems with large blocks by openly rounding this value up to 1 FSB when necessary. However, we never reset inode_cluster_size to reflect this new rounded value, which adds to the potential for mistakes in calculating geometries. Fix this by setting inode_cluster_size to reflect the rounded-up size if needed, and special-case the few places in the sparse inodes code where we actually need the smaller value to validate on-disk metadata. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-06 02:19:35 +08:00
XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw)) {
xfs: sparse inode chunks feature helpers and mount requirements The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:57:27 +08:00
xfs_warn(mp,
"Sparse inode block alignment (%u) must match cluster size (%llu).",
mp->m_sb.sb_spino_align,
xfs: fix inode_cluster_size rounding mayhem inode_cluster_size is supposed to represent the size (in bytes) of an inode cluster buffer. We avoid having to handle multiple clusters per filesystem block on filesystems with large blocks by openly rounding this value up to 1 FSB when necessary. However, we never reset inode_cluster_size to reflect this new rounded value, which adds to the potential for mistakes in calculating geometries. Fix this by setting inode_cluster_size to reflect the rounded-up size if needed, and special-case the few places in the sparse inodes code where we actually need the smaller value to validate on-disk metadata. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-06 02:19:35 +08:00
XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw));
xfs: sparse inode chunks feature helpers and mount requirements The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:57:27 +08:00
error = -EINVAL;
goto out_remove_uuid;
}
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
/*
xfs: fix the comment of xfs_mountfs() Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 11:15:03 +08:00
* Check that the data (and log if separate) is an ok size.
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
*/
[XFS] cleanup xfs_mountfs Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:49:32 +08:00
error = xfs_check_sizes(mp);
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
if (error)
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_remove_uuid;
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Initialize realtime fields in the mount structure
*/
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
error = xfs_rtmount_init(mp);
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "RT mount failed");
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_remove_uuid;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Copies the low order bits of the timestamp and the randomly
* set "sequence" number out of a UUID.
*/
xfs: remove uuid_getnodeuniq and xfs_uu_t Opencode uuid_getnodeuniq in the only caller, and directly decode the uuid_t representation instead of using a structure cast for it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-05 15:39:10 +08:00
mp->m_fixedfsid[0] =
(get_unaligned_be16(&sbp->sb_uuid.b[8]) << 16) |
get_unaligned_be16(&sbp->sb_uuid.b[4]);
mp->m_fixedfsid[1] = get_unaligned_be32(&sbp->sb_uuid.b[0]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: introduce directory geometry structure The directory code has a dependency on the struct xfs_mount to supply the directory block geometry. Block size, block log size, and other parameters are pre-caclulated in the struct xfs_mount or access directly from the superblock embedded in the struct xfs_mount. Extract all of this geometry information out of the struct xfs_mount and superblock and place it into a new struct xfs_da_geometry defined by the directory code. Allocate and initialise it at mount time, and attach it to the struct xfs_mount so it canbe passed back into the directory code appropriately rather than using the struct xfs_mount. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 13:01:58 +08:00
error = xfs_da_mount(mp);
if (error) {
xfs_warn(mp, "Failed dir/attr init: %d", error);
goto out_remove_uuid;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Initialize the precomputed transaction reservations values.
*/
xfs_trans_init(mp);
/*
* Allocate and initialize the per-ag data.
*/
xfs: Pre-calculate per-AG agbno geometry There is a lot of overhead in functions like xfs_verify_agbno() that repeatedly calculate the geometry limits of an AG. These can be pre-calculated as they are static and the verification context has a per-ag context it can quickly reference. In the case of xfs_verify_agbno(), we now always have a perag context handy, so we can store the AG length and the minimum valid block in the AG in the perag. This means we don't have to calculate it on every call and it can be inlined in callers if we move it to xfs_ag.h. Move xfs_ag_block_count() to xfs_ag.c because it's really a per-ag function and not an XFS type function. We need a little bit of rework that is specific to xfs_initialise_perag() to allow growfs to calculate the new perag sizes before we've updated the primary superblock during the grow (chicken/egg situation). Note that we leave the original xfs_verify_agbno in place in xfs_types.c as a static function as other callers in that file do not have per-ag contexts so still need to go the long way. It's been renamed to xfs_verify_agno_agbno() to indicate it takes both an agno and an agbno to differentiate it from new function. Future commits will make similar changes for other per-ag geometry validation functions. Further: $ size --totals fs/xfs/built-in.a text data bss dec hex filename before 1483006 329588 572 1813166 1baaae (TOTALS) after 1482185 329588 572 1812345 1ba779 (TOTALS) This rework reduces the binary size by ~820 bytes, indicating that much less work is being done to bounds check the agbno values against on per-ag geometry information. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2022-07-07 17:13:02 +08:00
error = xfs_initialize_perag(mp, sbp->sb_agcount, mp->m_sb.sb_dblocks,
&mp->m_maxagi);
xfs: Replace per-ag array with a radix tree The use of an array for the per-ag structures requires reallocation of the array when growing the filesystem. This requires locking access to the array to avoid use after free situations, and the locking is difficult to get right. To avoid needing to reallocate an array, change the per-ag structures to an allocated object per ag and index them using a tree structure. The AGs are always densely indexed (hence the use of an array), but the number supported is 2^32 and lookups tend to be random and hence indexing needs to scale. A simple choice is a radix tree - it works well with this sort of index. This change also removes another large contiguous allocation from the mount/growfs path in XFS. The growing process now needs to change to only initialise the new AGs required for the extra space, and as such only needs to exclusively lock the tree for inserts. The rest of the code only needs to lock the tree while doing lookups, and hence this will remove all the deadlocks that currently occur on the m_perag_lock as it is now an innermost lock. The lock is also changed to a spinlock from a read/write lock as the hold time is now extremely short. To complete the picture, the per-ag structures will need to be reference counted to ensure that we don't free/modify them while they are still in use. This will be done in subsequent patch. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-11 19:47:44 +08:00
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "Failed per-ag init: %d", error);
xfs: introduce directory geometry structure The directory code has a dependency on the struct xfs_mount to supply the directory block geometry. Block size, block log size, and other parameters are pre-caclulated in the struct xfs_mount or access directly from the superblock embedded in the struct xfs_mount. Extract all of this geometry information out of the struct xfs_mount and superblock and place it into a new struct xfs_da_geometry defined by the directory code. Allocate and initialise it at mount time, and attach it to the struct xfs_mount so it canbe passed back into the directory code appropriately rather than using the struct xfs_mount. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 13:01:58 +08:00
goto out_free_dir;
xfs: Replace per-ag array with a radix tree The use of an array for the per-ag structures requires reallocation of the array when growing the filesystem. This requires locking access to the array to avoid use after free situations, and the locking is difficult to get right. To avoid needing to reallocate an array, change the per-ag structures to an allocated object per ag and index them using a tree structure. The AGs are always densely indexed (hence the use of an array), but the number supported is 2^32 and lookups tend to be random and hence indexing needs to scale. A simple choice is a radix tree - it works well with this sort of index. This change also removes another large contiguous allocation from the mount/growfs path in XFS. The growing process now needs to change to only initialise the new AGs required for the extra space, and as such only needs to exclusively lock the tree for inserts. The rest of the code only needs to lock the tree while doing lookups, and hence this will remove all the deadlocks that currently occur on the m_perag_lock as it is now an innermost lock. The lock is also changed to a spinlock from a read/write lock as the hold time is now extremely short. To complete the picture, the per-ag structures will need to be reference counted to ensure that we don't free/modify them while they are still in use. This will be done in subsequent patch. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-11 19:47:44 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: convert open coded corruption check to use XFS_IS_CORRUPT Convert the last of the open coded corruption check and report idioms to use the XFS_IS_CORRUPT macro. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:53:22 +08:00
if (XFS_IS_CORRUPT(mp, !sbp->sb_logblocks)) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "no log defined");
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
error = -EFSCORRUPTED;
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_free_perag;
}
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:43 +08:00
error = xfs_inodegc_register_shrinker(mp);
if (error)
goto out_fail_wait;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
* Log's mount-time initialization. The first part of recovery can place
* some items on the AIL, to be handled when recovery is finished or
* cancelled.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
error = xfs_log_mount(mp, mp->m_logdev_targp,
XFS_FSB_TO_DADDR(mp, sbp->sb_logstart),
XFS_FSB_TO_BB(mp, sbp->sb_logblocks));
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "log mount failed");
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:43 +08:00
goto out_inodegc_shrinker;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
/* Enable background inode inactivation workers. */
xfs_inodegc_start(mp);
xfs: don't run speculative preallocation gc when fs is frozen Now that we have the infrastructure to switch background workers on and off at will, fix the block gc worker code so that we don't actually run the worker when the filesystem is frozen, same as we do for deferred inactivation. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:42 +08:00
xfs_blockgc_start(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:25 +08:00
/*
* Now that we've recovered any pending superblock feature bit
* additions, we can finish setting up the attr2 behaviour for the
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
* mount. The noattr2 option overrides the superblock flag, so only
* check the superblock feature flag if the mount option is not set.
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:25 +08:00
*/
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (xfs_has_noattr2(mp)) {
mp->m_features &= ~XFS_FEAT_ATTR2;
} else if (!xfs_has_attr2(mp) &&
(mp->m_sb.sb_features2 & XFS_SB_VERSION2_ATTR2BIT)) {
mp->m_features |= XFS_FEAT_ATTR2;
}
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:25 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Get and sanity-check the root inode.
* Save the pointer to it in the mount structure.
*/
xfs: verify root inode more thoroughly When looking up the root inode at mount time, we don't actually do any verification to check that the inode is allocated and accounted for correctly in the INOBT. Make the checks on the root inode more robust by making it an untrusted lookup. This forces the inode lookup to use the inode btree to verify the inode is allocated and mapped correctly to disk. This will also have the effect of catching a significant number of AGI/INOBT related corruptions in AG 0 at mount time. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 01:09:33 +08:00
error = xfs_iget(mp, NULL, sbp->sb_rootino, XFS_IGET_UNTRUSTED,
XFS_ILOCK_EXCL, &rip);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (error) {
xfs: verify root inode more thoroughly When looking up the root inode at mount time, we don't actually do any verification to check that the inode is allocated and accounted for correctly in the INOBT. Make the checks on the root inode more robust by making it an untrusted lookup. This forces the inode lookup to use the inode btree to verify the inode is allocated and mapped correctly to disk. This will also have the effect of catching a significant number of AGI/INOBT related corruptions in AG 0 at mount time. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 01:09:33 +08:00
xfs_warn(mp,
"Failed to read root inode 0x%llx, error %d",
sbp->sb_rootino, -error);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_log_dealloc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ASSERT(rip != NULL);
xfs: convert open coded corruption check to use XFS_IS_CORRUPT Convert the last of the open coded corruption check and report idioms to use the XFS_IS_CORRUPT macro. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-12 04:53:22 +08:00
if (XFS_IS_CORRUPT(mp, !S_ISDIR(VFS_I(rip)->i_mode))) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "corrupted root inode %llu: not a directory",
[XFS] Portability changes: remove prdev, stick to one diagnostic interface. SGI-PV: 953338 SGI-Modid: xfs-linux-melb:xfs-kern:26103a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 13:29:40 +08:00
(unsigned long long)rip->i_ino);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_iunlock(rip, XFS_ILOCK_EXCL);
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
error = -EFSCORRUPTED;
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_rele_rip;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
mp->m_rootip = rip; /* save it */
xfs_iunlock(rip, XFS_ILOCK_EXCL);
/*
* Initialize realtime inode pointers in the mount structure
*/
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-12 09:03:40 +08:00
error = xfs_rtmount_inodes(mp);
if (error) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Free up the root inode.
*/
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "failed to read RT inodes");
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
goto out_rele_rip;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
/* Make sure the summary counts are ok. */
error = xfs_check_summary_counts(mp);
if (error)
goto out_rtunmount;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
xfs: fix bad_features2 fixups for the root filesystem Currently the bad_features2 fixup and the alignment updates in the superblock are skipped if we mount a filesystem read-only. But for the root filesystem the typical case is to mount read-only first and only later remount writeable so we'll never perform this update at all. It's not a big problem but means the logs of people needing the fixup get spammed at every boot because they never happen on disk. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19 09:04:07 +08:00
* If this is a read-only mount defer the superblock updates until
* the next remount into writeable mode. Otherwise we would never
* perform the update e.g. for the root filesystem.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (mp->m_update_sb && !xfs_is_readonly(mp)) {
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-22 06:10:31 +08:00
error = xfs_sync_sb(mp, false);
[XFS] Propagate errors from xfs_trans_commit(). xfs_trans_commit() can return errors when there are problems in the transaction subsystem. They are indicative that the entire transaction may be incomplete, and hence the error should be propagated as there is a good possibility that there is something fatally wrong in the filesystem. Catch and propagate or warn about commit errors in the places where they are currently ignored. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30795a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:21:18 +08:00
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "failed to write sb changes");
xfs: make sure to free the real-time inodes in the mount error path When mount fails after allocating the real-time inodes we currently leak them. Add a new helper to free the real-time inodes which can be used by both the mount and unmount path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:33:58 +08:00
goto out_rtunmount;
[XFS] Propagate errors from xfs_trans_commit(). xfs_trans_commit() can return errors when there are problems in the transaction subsystem. They are indicative that the entire transaction may be incomplete, and hence the error should be propagated as there is a good possibility that there is something fatally wrong in the filesystem. Catch and propagate or warn about commit errors in the places where they are currently ignored. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30795a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:21:18 +08:00
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Initialise the XFS quota management subsystem for this mount
*/
xfs: remove the active vs running quota differentiation These only made a difference when quotaoff supported disabling quota accounting on a mounted file system, so we can switch everyone to use a single set of flags and helpers now. Note that the *QUOTA_ON naming for the helpers is kept as it was the much more commonly used one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:37 +08:00
if (XFS_IS_QUOTA_ON(mp)) {
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
error = xfs_qm_newmount(mp, &quotamount, &quotaflags);
if (error)
goto out_rtunmount;
} else {
/*
* If a file system had quotas running earlier, but decided to
* mount without -o uquota/pquota/gquota options, revoke the
* quotachecked license.
*/
if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_notice(mp, "resetting quota flags");
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
error = xfs_mount_reset_sbqflags(mp);
if (error)
xfs: fix a couple error sequence jumps in xfs_mountfs() xfs_mountfs() has a couple failure conditions that do not jump to the correct labels. Specifically: - xfs_initialize_perag_data() failure does not deallocate the log even though it occurs after log initialization - xfs_mount_reset_sbqflags() failure returns the error directly rather than jump to the error sequence Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 05:41:25 +08:00
goto out_rtunmount;
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
* Finish recovering the file system. This part needed to be delayed
* until after the root and real-time bitmap inodes were consistently
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes During regular operation, the xfs_inactive operations create transactions with zero block reservation because in general we're freeing space, not asking for more. The per-AG space reservations created at mount time enable us to handle expansions of the refcount btree without needing to reserve blocks to the transaction. Unfortunately, log recovery doesn't create the per-AG space reservations when intent items are being recovered. This isn't an issue for intent item recovery itself because they explicitly request blocks, but any inode inactivation that can happen during log recovery uses the same xfs_inactive paths as regular runtime. If a refcount btree expansion happens, the transaction will fail due to blk_res_used > blk_res, and we shut down the filesystem unnecessarily. Fix this problem by making per-AG reservations temporarily so that we can handle the inactivations, and releasing them at the end. This brings the recovery environment closer to the runtime environment. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-06-19 02:57:07 +08:00
* read in. Temporarily create per-AG space reservations for metadata
* btree shape changes because space freeing transactions (for inode
* inactivation) require the per-AG reservation in lieu of reserving
* blocks.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes During regular operation, the xfs_inactive operations create transactions with zero block reservation because in general we're freeing space, not asking for more. The per-AG space reservations created at mount time enable us to handle expansions of the refcount btree without needing to reserve blocks to the transaction. Unfortunately, log recovery doesn't create the per-AG space reservations when intent items are being recovered. This isn't an issue for intent item recovery itself because they explicitly request blocks, but any inode inactivation that can happen during log recovery uses the same xfs_inactive paths as regular runtime. If a refcount btree expansion happens, the transaction will fail due to blk_res_used > blk_res, and we shut down the filesystem unnecessarily. Fix this problem by making per-AG reservations temporarily so that we can handle the inactivations, and releasing them at the end. This brings the recovery environment closer to the runtime environment. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-06-19 02:57:07 +08:00
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error == -ENOSPC)
xfs_warn(mp,
"ENOSPC reserving per-AG metadata pool, log recovery may fail.");
[XFS] cleanup xfs_mountfs Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:49:32 +08:00
error = xfs_log_mount_finish(mp);
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes During regular operation, the xfs_inactive operations create transactions with zero block reservation because in general we're freeing space, not asking for more. The per-AG space reservations created at mount time enable us to handle expansions of the refcount btree without needing to reserve blocks to the transaction. Unfortunately, log recovery doesn't create the per-AG space reservations when intent items are being recovered. This isn't an issue for intent item recovery itself because they explicitly request blocks, but any inode inactivation that can happen during log recovery uses the same xfs_inactive paths as regular runtime. If a refcount btree expansion happens, the transaction will fail due to blk_res_used > blk_res, and we shut down the filesystem unnecessarily. Fix this problem by making per-AG reservations temporarily so that we can handle the inactivations, and releasing them at the end. This brings the recovery environment closer to the runtime environment. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-06-19 02:57:07 +08:00
xfs_fs_unreserve_ag_blocks(mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (error) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "log mount finish failed");
xfs: make sure to free the real-time inodes in the mount error path When mount fails after allocating the real-time inodes we currently leak them. Add a new helper to free the real-time inodes which can be used by both the mount and unmount path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:33:58 +08:00
goto out_rtunmount;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: quiesce the filesystem after recovery on readonly mount Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-26 06:21:44 +08:00
/*
* Now the log is fully replayed, we can transition to full read-only
* mode for read-only mounts. This will sync all the metadata and clean
* the log so that the recovery we just performed does not have to be
* replayed again on the next mount.
*
* We use the same quiesce mechanism as the rw->ro remount, as they are
* semantically identical operations.
*/
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (xfs_is_readonly(mp) && !xfs_has_norecovery(mp))
xfs: remove xfs_quiesce_attr() xfs_quiesce_attr() is now a wrapper for xfs_log_clean(). Remove it and call xfs_log_clean() directly. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2021-01-23 08:48:24 +08:00
xfs_log_clean(mp);
xfs: quiesce the filesystem after recovery on readonly mount Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-26 06:21:44 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Complete the quota initialisation, post-log-replay component.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (quotamount) {
ASSERT(mp->m_qflags == 0);
mp->m_qflags = quotaflags;
xfs_qm_mount_quotas(mp);
}
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-18 14:50:27 +08:00
/*
* Now we are mounted, reserve a small amount of unused space for
* privileged transactions. This is needed so that transaction
* space required for critical operations can dip into this pool
* when at ENOSPC. This is needed for operations like create with
* attr, unwritten extent conversion at ENOSPC, etc. Data allocations
* are not allowed to use this reserved space.
xfs: Increase the default size of the reserved blocks pool The current default size of the reserved blocks pool is easy to deplete with certain workloads, in particular workloads that do lots of concurrent delayed allocation extent conversions. If enough transactions are running in parallel and the entire pool is consumed then subsequent calls to xfs_trans_reserve() will fail with ENOSPC. Also add a rate limited warning so we know if this starts happening again. This is an updated version of an old patch from Lachlan McIlroy. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-03-04 09:46:25 +08:00
*
* This may drive us straight to ENOSPC on mount, but that implies
* we were already there on the last unmount. Warn if this occurs.
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-18 14:50:27 +08:00
*/
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:52 +08:00
if (!xfs_is_readonly(mp)) {
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
resblks = xfs_default_resblks(mp);
error = xfs_reserve_blocks(mp, &resblks, NULL);
if (error)
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp,
"Unable to allocate reserve blocks. Continuing without reserve pool.");
xfs: store in-progress CoW allocations in the refcount btree Due to the way the CoW algorithm in XFS works, there's an interval during which blocks allocated to handle a CoW can be lost -- if the FS goes down after the blocks are allocated but before the block remapping takes place. This is exacerbated by the cowextsz hint -- allocated reservations can sit around for a while, waiting to get used. Since the refcount btree doesn't normally store records with refcount of 1, we can use it to record these in-progress extents. In-progress blocks cannot be shared because they're not user-visible, so there shouldn't be any conflicts with other programs. This is a better solution than holding EFIs during writeback because (a) EFIs can't be relogged currently, (b) even if they could, EFIs are bound by available log space, which puts an unnecessary upper bound on how much CoW we can have in flight, and (c) we already have a mechanism to track blocks. At mount time, read the refcount records and free anything we find with a refcount of 1 because those were in-progress when the FS went down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:39 +08:00
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:44 +08:00
/* Reserve AG blocks for future btree expansion. */
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error != -ENOSPC)
goto out_agresv;
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-06 06:59:53 +08:00
}
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-18 14:50:27 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:44 +08:00
out_agresv:
xfs_fs_unreserve_ag_blocks(mp);
xfs: store in-progress CoW allocations in the refcount btree Due to the way the CoW algorithm in XFS works, there's an interval during which blocks allocated to handle a CoW can be lost -- if the FS goes down after the blocks are allocated but before the block remapping takes place. This is exacerbated by the cowextsz hint -- allocated reservations can sit around for a while, waiting to get used. Since the refcount btree doesn't normally store records with refcount of 1, we can use it to record these in-progress extents. In-progress blocks cannot be shared because they're not user-visible, so there shouldn't be any conflicts with other programs. This is a better solution than holding EFIs during writeback because (a) EFIs can't be relogged currently, (b) even if they could, EFIs are bound by available log space, which puts an unnecessary upper bound on how much CoW we can have in flight, and (c) we already have a mechanism to track blocks. At mount time, read the refcount records and free anything we find with a refcount of 1 because those were in-progress when the FS went down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:39 +08:00
xfs_qm_unmount_quotas(mp);
xfs: make sure to free the real-time inodes in the mount error path When mount fails after allocating the real-time inodes we currently leak them. Add a new helper to free the real-time inodes which can be used by both the mount and unmount path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:33:58 +08:00
out_rtunmount:
xfs_rtunmount_inodes(mp);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
out_rele_rip:
xfs: clean up IRELE/iput callsites Replace the IRELE macro with a proper function so that we can do proper typechecking and so that we can stop open-coding iput in scrub, which means that we'll be able to ftrace inode lifetimes going through scrub correctly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-07-26 03:52:32 +08:00
xfs_irele(rip);
xfs: don't leak quotacheck dquots when cow recovery If we fail a mount on account of cow recovery errors, it's possible that a previous quotacheck left some dquots in memory. The bailout clause of xfs_mountfs forgets to purge these, and so we leak them. Fix that. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-08-11 05:20:29 +08:00
/* Clean out dquots that might be in memory after quotacheck. */
xfs_qm_unmount(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
/*
* Inactivate all inodes that might still be in memory after a log
* intent recovery failure so that reclaim can free them. Metadata
* inodes and the root directory shouldn't need inactivation, but the
* mount failed for some reason, so pull down all the state and flee.
*/
xfs_inodegc_flush(mp);
xfs: on failed mount, force-reclaim inodes after unmounting quota controls When mounting fails, we must force-reclaim inodes (and disable delayed reclaim) /after/ the realtime and quota control have let go of the realtime and quota inodes. Without this, we corrupt the timer list and cause other weird problems. Found by xfs/376 fuzzing u3.bmbt[0].lastoff on an rmap filesystem to force a bogus post-eof extent reclaim that causes the fs to go down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 08:26:49 +08:00
/*
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
* Flush all inode reclamation work and flush the log.
xfs: on failed mount, force-reclaim inodes after unmounting quota controls When mounting fails, we must force-reclaim inodes (and disable delayed reclaim) /after/ the realtime and quota control have let go of the realtime and quota inodes. Without this, we corrupt the timer list and cause other weird problems. Found by xfs/376 fuzzing u3.bmbt[0].lastoff on an rmap filesystem to force a bogus post-eof extent reclaim that causes the fs to go down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 08:26:49 +08:00
* We have to do this /after/ rtunmount and qm_unmount because those
* two will have scheduled delayed reclaim for the rt/quota inodes.
*
* This is slightly different from the unmountfs call sequence
* because we could be tearing down a partially set up mount. In
* particular, if log_mount_finish fails we bail out without calling
* qm_unmount_quotas and therefore rely on qm_unmount to release the
* quota inodes.
*/
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
xfs_unmount_flush_inodes(mp);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
out_log_dealloc:
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:58:36 +08:00
xfs_log_mount_cancel(mp);
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:43 +08:00
out_inodegc_shrinker:
unregister_shrinker(&mp->m_inodegc_shrinker);
xfs: flush outstanding buffers on log mount failure When we fail to mount the log in xfs_mountfs(), we tear down all the infrastructure we have already allocated. However, the process of mounting the log may have progressed to the point of reading, caching and modifying buffers in memory. Hence before we can free all the infrastructure, we have to flush and remove all the buffers from memory. Problem first reported by Eric Sandeen, later a different incarnation was reported by Ben Myers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:59:06 +08:00
out_fail_wait:
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp)
xfs: rename xfs_wait_buftarg() to xfs_buftarg_drain() xfs_wait_buftarg() is vaguely named and somewhat overloaded. Its primary purpose is to reclaim all buffers from the provided buffer target LRU. In preparation to refactor xfs_wait_buftarg() into serialization and LRU draining components, rename the function and associated helpers to something more descriptive. This patch has no functional changes with the minor exception of renaming a tracepoint. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-01-23 08:48:19 +08:00
xfs_buftarg_drain(mp->m_logdev_targp);
xfs_buftarg_drain(mp->m_ddev_targp);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
out_free_perag:
[XFS] refactor xfs_mount_free xfs_mount_free mostly frees the perag data, which is something that is duplicated in the mount error path. Move the XFS_QM_DONE call to the caller and remove the useless mutex_destroy/spinlock_destroy calls so that we can re-use it for the mount error path. Also rename it to xfs_free_perag to reflect what it does. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31836a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:50:47 +08:00
xfs_free_perag(mp);
xfs: introduce directory geometry structure The directory code has a dependency on the struct xfs_mount to supply the directory block geometry. Block size, block log size, and other parameters are pre-caclulated in the struct xfs_mount or access directly from the superblock embedded in the struct xfs_mount. Extract all of this geometry information out of the struct xfs_mount and superblock and place it into a new struct xfs_da_geometry defined by the directory code. Allocate and initialise it at mount time, and attach it to the struct xfs_mount so it canbe passed back into the directory code appropriately rather than using the struct xfs_mount. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 13:01:58 +08:00
out_free_dir:
xfs_da_unmount(mp);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
out_remove_uuid:
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
xfs_uuid_unmount(mp);
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-21 08:54:46 +08:00
out_remove_errortag:
xfs_errortag_del(mp);
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 08:58:51 +08:00
out_remove_error_sysfs:
xfs_error_sysfs_del(mp);
xfs: per-filesystem stats in sysfs This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 15:21:19 +08:00
out_del_stats:
xfs_sysfs_del(&mp->m_stats.xs_kobj);
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 06:07:01 +08:00
out_remove_sysfs:
xfs_sysfs_del(&mp->m_kobj);
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:31:52 +08:00
out:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return error;
}
/*
* This flushes out the inodes,dquots and the superblock, unmounts the
* log and makes sure that incore structures are freed.
*/
[XFS] xfs_unmountfs should return void xfs_unmounts can't and shouldn't return errors so declare it as returning void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31833a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:49:57 +08:00
void
xfs_unmountfs(
struct xfs_mount *mp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-17 02:00:05 +08:00
uint64_t resblks;
[XFS] xfs_unmountfs should return void xfs_unmounts can't and shouldn't return errors so declare it as returning void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31833a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:49:57 +08:00
int error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-07 02:05:39 +08:00
/*
* Perform all on-disk metadata updates required to inactivate inodes
* that the VFS evicted earlier in the unmount process. Freeing inodes
* and discarding CoW fork preallocations can cause shape changes to
* the free inode and refcount btrees, respectively, so we must finish
* this before we discard the metadata space reservations. Metadata
* inodes and the root directory do not require inactivation.
*/
xfs_inodegc_flush(mp);
xfs: rename block gc start and stop functions Shorten the names of the two functions that start and stop block preallocation garbage collection and move them up to the other blockgc functions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-01-23 08:48:44 +08:00
xfs_blockgc_stop(mp);
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:44 +08:00
xfs_fs_unreserve_ag_blocks(mp);
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
xfs_qm_unmount_quotas(mp);
xfs: make sure to free the real-time inodes in the mount error path When mount fails after allocating the real-time inodes we currently leak them. Add a new helper to free the real-time inodes which can be used by both the mount and unmount path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-04 16:33:58 +08:00
xfs_rtunmount_inodes(mp);
xfs: clean up IRELE/iput callsites Replace the IRELE macro with a proper function so that we can do proper typechecking and so that we can stop open-coding iput in scrub, which means that we'll be able to ftrace inode lifetimes going through scrub correctly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-07-26 03:52:32 +08:00
xfs_irele(mp->m_rootip);
[XFS] move root inode IRELE into xfs_unmountfs The root inode is allocated in xfs_mountfs so it should be release in xfs_unmountfs. For the unmount case that means we do it after the the xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the dmapi unmount event. Note that both reference the rip variable which might be freed by that time in case inode flushing has kicked in, so strictly speaking this might count as a bug fix SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31830a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:49:04 +08:00
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-03-03 01:32:53 +08:00
xfs_unmount_flush_inodes(mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
xfs_qm_unmount(mp);
[XFS] Fix use-after-free with log and quotas Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Peter Leckie <pleckie@sgi.com>
2008-10-30 13:53:25 +08:00
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-18 14:50:27 +08:00
/*
* Unreserve any blocks we have so that when we unmount we don't account
* the reserved free space as used. This is really only necessary for
* lazy superblock counting because it trusts the incore superblock
xfs: fix various typos Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-03-29 15:55:42 +08:00
* counters to be absolutely correct on clean unmount.
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-06-18 14:50:27 +08:00
*
* We don't bother correcting this elsewhere for lazy superblock
* counting because on mount of an unclean filesystem we reconstruct the
* correct counter value and this is irrelevant.
*
* For non-lazy counter filesystems, this doesn't matter at all because
* we only every apply deltas to the superblock and hence the incore
* value does not matter....
*/
resblks = 0;
[XFS] Report errors from xfs_reserve_blocks(). xfs_reserve_blocks() can fail in interesting ways. In neither case is it a fatal error, but the result can lead to sub-optimal behaviour. Warn to the syslog if the call fails but otherwise continue. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30784a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:20:03 +08:00
error = xfs_reserve_blocks(mp, &resblks, NULL);
if (error)
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_warn(mp, "Unable to free reserved block pool. "
[XFS] Report errors from xfs_reserve_blocks(). xfs_reserve_blocks() can fail in interesting ways. In neither case is it a fatal error, but the result can lead to sub-optimal behaviour. Warn to the syslog if the call fails but otherwise continue. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30784a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 10:20:03 +08:00
"Freespace may not be correct on next mount.");
xfs: cleanup log unmount handling Kill the current xfs_log_unmount wrapper and opencode the two function calls in the only caller. Rename the current xfs_log_unmount_dealloc to xfs_log_unmount as it undoes xfs_log_mount and the new name makes that more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-03-16 15:19:29 +08:00
xfs_log_unmount(mp);
xfs: introduce directory geometry structure The directory code has a dependency on the struct xfs_mount to supply the directory block geometry. Block size, block log size, and other parameters are pre-caclulated in the struct xfs_mount or access directly from the superblock embedded in the struct xfs_mount. Extract all of this geometry information out of the struct xfs_mount and superblock and place it into a new struct xfs_da_geometry defined by the directory code. Allocate and initialise it at mount time, and attach it to the struct xfs_mount so it canbe passed back into the directory code appropriately rather than using the struct xfs_mount. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-06 13:01:58 +08:00
xfs_da_unmount(mp);
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-30 16:21:31 +08:00
xfs_uuid_unmount(mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[XFS] kill INDUCE_IO_ERROR All the error injection is already enabled through ifdef DEBUG, so kill the never set second cpp symbol to activate it without the rest of the debugging infrastructure. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31771a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:17:37 +08:00
#if defined(DEBUG)
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-21 08:54:46 +08:00
xfs_errortag_clearall(mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-07 02:05:43 +08:00
unregister_shrinker(&mp->m_inodegc_shrinker);
[XFS] refactor xfs_mount_free xfs_mount_free mostly frees the perag data, which is something that is duplicated in the mount error path. Move the XFS_QM_DONE call to the caller and remove the useless mutex_destroy/spinlock_destroy calls so that we can re-use it for the mount error path. Also rename it to xfs_free_perag to reflect what it does. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31836a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 14:50:47 +08:00
xfs_free_perag(mp);
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 06:07:01 +08:00
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-21 08:54:46 +08:00
xfs_errortag_del(mp);
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 08:58:51 +08:00
xfs_error_sysfs_del(mp);
xfs: per-filesystem stats in sysfs This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 15:21:19 +08:00
xfs_sysfs_del(&mp->m_stats.xs_kobj);
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-15 06:07:01 +08:00
xfs_sysfs_del(&mp->m_kobj);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: allow lazy sb counter sync during filesystem freeze sequence The expectation since the introduction the lazy superblock counters is that the counters are synced and superblock logged appropriately as part of the filesystem freeze sequence. This does not occur, however, due to the logic in xfs_fs_writable() that prevents progress when the fs is in any state other than SB_UNFROZEN. While this is a bug, it has not been exposed to date because the last thing XFS does during freeze is dirty the log. The log recovery process recalculates the counters from AGI/AGF metadata to ensure everything is correct. Therefore should a crash occur while an fs is frozen, the subsequent log recovery puts everything back in order. See the following commit for reference: 92821e2b [XFS] Lazy Superblock Counters We might not always want to rely on dirtying the log on a frozen fs. Modify xfs_log_sbcount() to proceed when the filesystem is freezing but not once the freeze process has completed. Modify xfs_fs_writable() to accept the minimum freeze level for which modifications should be blocked to support various codepaths. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 11:02:59 +08:00
/*
* Determine whether modifications can proceed. The caller specifies the minimum
* freeze level for which modifications should not be allowed. This allows
* certain operations to proceed while the freeze sequence is in progress, if
* necessary.
*/
bool
xfs_fs_writable(
struct xfs_mount *mp,
int level)
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
{
xfs: allow lazy sb counter sync during filesystem freeze sequence The expectation since the introduction the lazy superblock counters is that the counters are synced and superblock logged appropriately as part of the filesystem freeze sequence. This does not occur, however, due to the logic in xfs_fs_writable() that prevents progress when the fs is in any state other than SB_UNFROZEN. While this is a bug, it has not been exposed to date because the last thing XFS does during freeze is dirty the log. The log recovery process recalculates the counters from AGI/AGF metadata to ensure everything is correct. Therefore should a crash occur while an fs is frozen, the subsequent log recovery puts everything back in order. See the following commit for reference: 92821e2b [XFS] Lazy Superblock Counters We might not always want to rely on dirtying the log on a frozen fs. Modify xfs_log_sbcount() to proceed when the filesystem is freezing but not once the freeze process has completed. Modify xfs_fs_writable() to accept the minimum freeze level for which modifications should be blocked to support various codepaths. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 11:02:59 +08:00
ASSERT(level > SB_UNFROZEN);
if ((mp->m_super->s_writers.frozen >= level) ||
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown Remove the shouty macro and instead use the inline function that matches other state/feature check wrapper naming. This conversion was done with sed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:53 +08:00
xfs_is_shutdown(mp) || xfs_is_readonly(mp))
xfs: allow lazy sb counter sync during filesystem freeze sequence The expectation since the introduction the lazy superblock counters is that the counters are synced and superblock logged appropriately as part of the filesystem freeze sequence. This does not occur, however, due to the logic in xfs_fs_writable() that prevents progress when the fs is in any state other than SB_UNFROZEN. While this is a bug, it has not been exposed to date because the last thing XFS does during freeze is dirty the log. The log recovery process recalculates the counters from AGI/AGF metadata to ensure everything is correct. Therefore should a crash occur while an fs is frozen, the subsequent log recovery puts everything back in order. See the following commit for reference: 92821e2b [XFS] Lazy Superblock Counters We might not always want to rely on dirtying the log on a frozen fs. Modify xfs_log_sbcount() to proceed when the filesystem is freezing but not once the freeze process has completed. Modify xfs_fs_writable() to accept the minimum freeze level for which modifications should be blocked to support various codepaths. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28 11:02:59 +08:00
return false;
return true;
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
}
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
/* Adjust m_fdblocks or m_frextents. */
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
int
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
xfs_mod_freecounter(
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
struct xfs_mount *mp,
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
struct percpu_counter *counter,
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
int64_t delta,
bool rsvd)
{
int64_t lcounter;
long long res_used;
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
uint64_t set_aside = 0;
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
s32 batch;
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
bool has_resv_pool;
ASSERT(counter == &mp->m_fdblocks || counter == &mp->m_frextents);
has_resv_pool = (counter == &mp->m_fdblocks);
if (rsvd)
ASSERT(has_resv_pool);
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
if (delta > 0) {
/*
* If the reserve pool is depleted, put blocks back into it
* first. Most of the time the pool is full.
*/
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
if (likely(!has_resv_pool ||
mp->m_resblks == mp->m_resblks_avail)) {
percpu_counter_add(counter, delta);
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
return 0;
}
spin_lock(&mp->m_sb_lock);
res_used = (long long)(mp->m_resblks - mp->m_resblks_avail);
if (res_used > delta) {
mp->m_resblks_avail += delta;
} else {
delta -= res_used;
mp->m_resblks_avail = mp->m_resblks;
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
percpu_counter_add(counter, delta);
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
}
spin_unlock(&mp->m_sb_lock);
return 0;
}
/*
* Taking blocks away, need to be more accurate the closer we
* are to zero.
*
* If the counter has a value of less than 2 * max batch size,
* then make everything serialise as we are real close to
* ENOSPC.
*/
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
if (__percpu_counter_compare(counter, 2 * XFS_FDBLOCKS_BATCH,
xfs: inode and free block counters need to use __percpu_counter_compare Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0 [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580 [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260 [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0 [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250 [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200 [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0 [<ffffffff811f3958>] evict+0xb8/0x190 [<ffffffff811f433b>] iput+0x18b/0x1f0 [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320 [<ffffffff811d548a>] ? filp_close+0x5a/0x80 [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40 [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 05:39:34 +08:00
XFS_FDBLOCKS_BATCH) < 0)
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
batch = 1;
else
xfs: inode and free block counters need to use __percpu_counter_compare Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0 [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580 [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260 [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0 [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250 [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200 [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0 [<ffffffff811f3958>] evict+0xb8/0x190 [<ffffffff811f433b>] iput+0x18b/0x1f0 [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320 [<ffffffff811d548a>] ? filp_close+0x5a/0x80 [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40 [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 05:39:34 +08:00
batch = XFS_FDBLOCKS_BATCH;
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
xfs: set aside allocation btree blocks from block reservation The blocks used for allocation btrees (bnobt and countbt) are technically considered free space. This is because as free space is used, allocbt blocks are removed and naturally become available for traditional allocation. However, this means that a significant portion of free space may consist of in-use btree blocks if free space is severely fragmented. On large filesystems with large perag reservations, this can lead to a rare but nasty condition where a significant amount of physical free space is available, but the majority of actual usable blocks consist of in-use allocbt blocks. We have a record of a (~12TB, 32 AG) filesystem with multiple AGs in a state with ~2.5GB or so free blocks tracked across ~300 total allocbt blocks, but effectively at 100% full because the the free space is entirely consumed by refcountbt perag reservation. Such a large perag reservation is by design on large filesystems. The problem is that because the free space is so fragmented, this AG contributes the 300 or so allocbt blocks to the global counters as free space. If this pattern repeats across enough AGs, the filesystem lands in a state where global block reservation can outrun physical block availability. For example, a streaming buffered write on the affected filesystem continues to allow delayed allocation beyond the point where writeback starts to fail due to physical block allocation failures. The expected behavior is for the delalloc block reservation to fail gracefully with -ENOSPC before physical block allocation failure is a possibility. To address this problem, set aside in-use allocbt blocks at reservation time and thus ensure they cannot be reserved until truly available for physical allocation. This allows alloc btree metadata to continue to reside in free space, but dynamically adjusts reservation availability based on internal state. Note that the logic requires that the allocbt counter is fully populated at reservation time before it is fully effective. We currently rely on the mount time AGF scan in the perag reservation initialization code for this dependency on filesystems where it's most important (i.e. with active perag reservations). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-04-29 06:06:05 +08:00
/*
* Set aside allocbt blocks because these blocks are tracked as free
* space but not available for allocation. Technically this means that a
* single reservation cannot consume all remaining free space, but the
* ratio of allocbt blocks to usable free blocks should be rather small.
* The tradeoff without this is that filesystems that maintain high
* perag block reservations can over reserve physical block availability
* and fail physical allocation, which leads to much more serious
* problems (i.e. transaction abort, pagecache discards, etc.) than
* slightly premature -ENOSPC.
*/
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
if (has_resv_pool)
set_aside = xfs_fdblocks_unavailable(mp);
percpu_counter_add_batch(counter, delta, batch);
if (__percpu_counter_compare(counter, set_aside,
xfs: inode and free block counters need to use __percpu_counter_compare Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0 [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580 [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260 [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0 [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250 [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200 [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0 [<ffffffff811f3958>] evict+0xb8/0x190 [<ffffffff811f433b>] iput+0x18b/0x1f0 [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320 [<ffffffff811d548a>] ? filp_close+0x5a/0x80 [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40 [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 05:39:34 +08:00
XFS_FDBLOCKS_BATCH) >= 0) {
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
/* we had space! */
return 0;
}
/*
* lock up the sb for dipping into reserves before releasing the space
* that took us to ENOSPC.
*/
spin_lock(&mp->m_sb_lock);
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-12 04:49:42 +08:00
percpu_counter_add(counter, -delta);
if (!has_resv_pool || !rsvd)
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
goto fdblocks_enospc;
lcounter = (long long)mp->m_resblks_avail + delta;
if (lcounter >= 0) {
mp->m_resblks_avail = lcounter;
spin_unlock(&mp->m_sb_lock);
return 0;
}
xfs: define printk_once variants for xfs messages There are a couple places where we directly call printk_once() and one of them doesn't follow the standard xfs subsystem printk format as a result. #define printk_once variants to go with our existing printk_ratelimited #defines so we can do one-shot printks in a consistent manner. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-04-28 02:00:42 +08:00
xfs_warn_once(mp,
"Reserve blocks depleted! Consider increasing reserve pool size.");
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 18:22:03 +08:00
fdblocks_enospc:
spin_unlock(&mp->m_sb_lock);
return -ENOSPC;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Used to free the superblock along various error paths.
*/
void
xfs_freesb(
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
struct xfs_mount *mp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
struct xfs_buf *bp = mp->m_sb_bp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
xfs_buf_lock(bp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mp->m_sb_bp = NULL;
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2010-09-22 08:47:20 +08:00
xfs_buf_relse(bp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: merge xfs_lrw.c into xfs_file.c Currently the code to implement the file operations is split over two small files. Merge the content of xfs_lrw.c into xfs_file.c to have it in one place. Note that I haven't done various cleanups that are possible after this yet, they will follow in the next patch. Also the function xfs_dev_is_read_only which was in xfs_lrw.c before really doesn't fit in here at all and was moved to xfs_mount.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 17:44:46 +08:00
/*
* If the underlying (data/log/rt) device is readonly, there are some
* operations that cannot proceed.
*/
int
xfs_dev_is_read_only(
struct xfs_mount *mp,
char *message)
{
if (xfs_readonly_buftarg(mp->m_ddev_targp) ||
xfs_readonly_buftarg(mp->m_logdev_targp) ||
(mp->m_rtdev_targp && xfs_readonly_buftarg(mp->m_rtdev_targp))) {
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 07:08:35 +08:00
xfs_notice(mp, "%s required on read-only device.", message);
xfs_notice(mp, "write access unavailable, cannot proceed.");
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -EROFS;
xfs: merge xfs_lrw.c into xfs_file.c Currently the code to implement the file operations is split over two small files. Merge the content of xfs_lrw.c into xfs_file.c to have it in one place. Note that I haven't done various cleanups that are possible after this yet, they will follow in the next patch. Also the function xfs_dev_is_read_only which was in xfs_lrw.c before really doesn't fit in here at all and was moved to xfs_mount.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 17:44:46 +08:00
}
return 0;
}
xfs: force summary counter recalc at next mount Use the "bad summary count" mount flag from the previous patch to skip writing the unmount record to force log recovery at the next mount, which will recalculate the summary counters for us. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-21 00:28:40 +08:00
/* Force the summary counters to be recalculated at next mount. */
void
xfs_force_summary_recalc(
struct xfs_mount *mp)
{
xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:37 +08:00
if (!xfs_has_lazysbcount(mp))
xfs: force summary counter recalc at next mount Use the "bad summary count" mount flag from the previous patch to skip writing the unmount record to force log recovery at the next mount, which will recalculate the summary counters for us. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-21 00:28:40 +08:00
return;
xfs: replace the BAD_SUMMARY mount flag with the equivalent health code Replace the BAD_SUMMARY mount flag with calls to the equivalent health tracking code. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-12 22:41:15 +08:00
xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS);
xfs: force summary counter recalc at next mount Use the "bad summary count" mount flag from the previous patch to skip writing the unmount record to force log recovery at the next mount, which will recalculate the summary counters for us. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-21 00:28:40 +08:00
}
xfs: track delayed allocation reservations across the filesystem Add a percpu counter to track the number of blocks directly reserved for delayed allocations on the data device. This counter (in contrast to i_delayed_blks) does not track allocated CoW staging extents or anything going on with the realtime device. It will be used in the upcoming summary counter scrub function to check the free block counts without having to freeze the filesystem or walk all the inodes to find the delayed allocations. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-04-26 09:26:22 +08:00
xfs: allow setting and clearing of log incompat feature flags Log incompat feature flags in the superblock exist for one purpose: to protect the contents of a dirty log from replay on a kernel that isn't prepared to handle those dirty contents. This means that they can be cleared if (a) we know the log is clean and (b) we know that there aren't any other threads in the system that might be setting or relying upon a log incompat flag. Therefore, clear the log incompat flags when we've finished recovering the log, when we're unmounting cleanly, remounting read-only, or freezing; and provide a function so that subsequent patches can start using this. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-08 23:27:12 +08:00
/*
* Enable a log incompat feature flag in the primary superblock. The caller
* cannot have any other transactions in progress.
*/
int
xfs_add_incompat_log_feature(
struct xfs_mount *mp,
uint32_t feature)
{
struct xfs_dsb *dsb;
int error;
ASSERT(hweight32(feature) == 1);
ASSERT(!(feature & XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN));
/*
* Force the log to disk and kick the background AIL thread to reduce
* the chances that the bwrite will stall waiting for the AIL to unpin
* the primary superblock buffer. This isn't a data integrity
* operation, so we don't need a synchronous push.
*/
error = xfs_log_force(mp, XFS_LOG_SYNC);
if (error)
return error;
xfs_ail_push_all(mp->m_ail);
/*
* Lock the primary superblock buffer to serialize all callers that
* are trying to set feature bits.
*/
xfs_buf_lock(mp->m_sb_bp);
xfs_buf_hold(mp->m_sb_bp);
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown Remove the shouty macro and instead use the inline function that matches other state/feature check wrapper naming. This conversion was done with sed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:53 +08:00
if (xfs_is_shutdown(mp)) {
xfs: allow setting and clearing of log incompat feature flags Log incompat feature flags in the superblock exist for one purpose: to protect the contents of a dirty log from replay on a kernel that isn't prepared to handle those dirty contents. This means that they can be cleared if (a) we know the log is clean and (b) we know that there aren't any other threads in the system that might be setting or relying upon a log incompat flag. Therefore, clear the log incompat flags when we've finished recovering the log, when we're unmounting cleanly, remounting read-only, or freezing; and provide a function so that subsequent patches can start using this. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-08 23:27:12 +08:00
error = -EIO;
goto rele;
}
if (xfs_sb_has_incompat_log_feature(&mp->m_sb, feature))
goto rele;
/*
* Write the primary superblock to disk immediately, because we need
* the log_incompat bit to be set in the primary super now to protect
* the log items that we're going to commit later.
*/
dsb = mp->m_sb_bp->b_addr;
xfs_sb_to_disk(dsb, &mp->m_sb);
dsb->sb_features_log_incompat |= cpu_to_be32(feature);
error = xfs_bwrite(mp->m_sb_bp);
if (error)
goto shutdown;
/*
* Add the feature bits to the incore superblock before we unlock the
* buffer.
*/
xfs_sb_add_incompat_log_features(&mp->m_sb, feature);
xfs_buf_relse(mp->m_sb_bp);
/* Log the superblock to disk. */
return xfs_sync_sb(mp, false);
shutdown:
xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
rele:
xfs_buf_relse(mp->m_sb_bp);
return error;
}
/*
* Clear all the log incompat flags from the superblock.
*
* The caller cannot be in a transaction, must ensure that the log does not
* contain any log items protected by any log incompat bit, and must ensure
* that there are no other threads that depend on the state of the log incompat
* feature flags in the primary super.
*
* Returns true if the superblock is dirty.
*/
bool
xfs_clear_incompat_log_features(
struct xfs_mount *mp)
{
bool ret = false;
xfs: convert xfs_sb_version_has checks to use mount features This is a conversion of the remaining xfs_sb_version_has..(sbp) checks to use xfs_has_..(mp) feature checks. This was largely done with a vim replacement macro that did: :0,$s/xfs_sb_version_has\(.*\)&\(.*\)->m_sb/xfs_has_\1\2/g<CR> A couple of other variants were also used, and the rest touched up by hand. $ size -t fs/xfs/built-in.a text data bss dec hex filename before 1127533 311352 484 1439369 15f689 (TOTALS) after 1125360 311352 484 1437196 15ee0c (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:55 +08:00
if (!xfs_has_crc(mp) ||
xfs: allow setting and clearing of log incompat feature flags Log incompat feature flags in the superblock exist for one purpose: to protect the contents of a dirty log from replay on a kernel that isn't prepared to handle those dirty contents. This means that they can be cleared if (a) we know the log is clean and (b) we know that there aren't any other threads in the system that might be setting or relying upon a log incompat flag. Therefore, clear the log incompat flags when we've finished recovering the log, when we're unmounting cleanly, remounting read-only, or freezing; and provide a function so that subsequent patches can start using this. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-08 23:27:12 +08:00
!xfs_sb_has_incompat_log_feature(&mp->m_sb,
XFS_SB_FEAT_INCOMPAT_LOG_ALL) ||
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown Remove the shouty macro and instead use the inline function that matches other state/feature check wrapper naming. This conversion was done with sed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 09:46:53 +08:00
xfs_is_shutdown(mp))
xfs: allow setting and clearing of log incompat feature flags Log incompat feature flags in the superblock exist for one purpose: to protect the contents of a dirty log from replay on a kernel that isn't prepared to handle those dirty contents. This means that they can be cleared if (a) we know the log is clean and (b) we know that there aren't any other threads in the system that might be setting or relying upon a log incompat flag. Therefore, clear the log incompat flags when we've finished recovering the log, when we're unmounting cleanly, remounting read-only, or freezing; and provide a function so that subsequent patches can start using this. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-08 23:27:12 +08:00
return false;
/*
* Update the incore superblock. We synchronize on the primary super
* buffer lock to be consistent with the add function, though at least
* in theory this shouldn't be necessary.
*/
xfs_buf_lock(mp->m_sb_bp);
xfs_buf_hold(mp->m_sb_bp);
if (xfs_sb_has_incompat_log_feature(&mp->m_sb,
XFS_SB_FEAT_INCOMPAT_LOG_ALL)) {
xfs_sb_remove_incompat_log_features(&mp->m_sb);
ret = true;
}
xfs_buf_relse(mp->m_sb_bp);
return ret;
}
xfs: track delayed allocation reservations across the filesystem Add a percpu counter to track the number of blocks directly reserved for delayed allocations on the data device. This counter (in contrast to i_delayed_blks) does not track allocated CoW staging extents or anything going on with the realtime device. It will be used in the upcoming summary counter scrub function to check the free block counts without having to freeze the filesystem or walk all the inodes to find the delayed allocations. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-04-26 09:26:22 +08:00
/*
* Update the in-core delayed block counter.
*
* We prefer to update the counter without having to take a spinlock for every
* counter update (i.e. batching). Each change to delayed allocation
* reservations can change can easily exceed the default percpu counter
* batching, so we use a larger batch factor here.
*
* Note that we don't currently have any callers requiring fast summation
* (e.g. percpu_counter_read) so we can use a big batch value here.
*/
#define XFS_DELALLOC_BATCH (4096)
void
xfs_mod_delalloc(
struct xfs_mount *mp,
int64_t delta)
{
percpu_counter_add_batch(&mp->m_delalloc_blks, delta,
XFS_DELALLOC_BATCH);
}