2018-05-23 00:34:55 +08:00
|
|
|
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/*
|
|
|
|
* Copyright (c) 2018 BayLibre, SAS.
|
|
|
|
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
|
|
*
|
|
|
|
* Sample clock generator divider:
|
|
|
|
* This HW divider gates with value 0 but is otherwise a zero based divider:
|
|
|
|
*
|
|
|
|
* val >= 1
|
|
|
|
* divider = val + 1
|
|
|
|
*
|
|
|
|
* The duty cycle may also be set for the LR clock variant. The duty cycle
|
|
|
|
* ratio is:
|
|
|
|
*
|
|
|
|
* hi = [0 - val]
|
|
|
|
* duty_cycle = (1 + hi) / (1 + val)
|
|
|
|
*/
|
|
|
|
|
clk: meson: rework and clean drivers dependencies
Initially, the meson clock directory only hosted 2 controllers drivers,
for meson8 and gxbb. At the time, both used the same set of clock drivers
so managing the dependencies was not a big concern.
Since this ancient time, entropy did its job, controllers with different
requirement and specific clock drivers have been added. Unfortunately, we
did not do a great job at managing the dependencies between the
controllers and the different clock drivers. Some drivers, such as
clk-phase or vid-pll-div, are compiled even if they are useless on the
target (meson8). As we are adding new controllers, we need to be able to
pick a driver w/o pulling the whole thing.
The patch aims to clean things up by:
* providing a dedicated CONFIG_ for each clock drivers
* allowing clock drivers to be compiled as a modules, if possible
* stating explicitly which drivers are required by each controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
|
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
|
|
|
#include "clk-regmap.h"
|
|
|
|
#include "sclk-div.h"
|
2018-05-23 00:34:55 +08:00
|
|
|
|
|
|
|
static inline struct meson_sclk_div_data *
|
|
|
|
meson_sclk_div_data(struct clk_regmap *clk)
|
|
|
|
{
|
|
|
|
return (struct meson_sclk_div_data *)clk->data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
|
|
|
|
{
|
|
|
|
return (1 << sclk->div.width) - 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
|
|
|
|
{
|
|
|
|
return sclk_div_maxval(sclk) + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
|
|
|
|
unsigned long prate, int maxdiv)
|
|
|
|
{
|
|
|
|
int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
|
|
|
|
|
|
|
|
return clamp(div, 2, maxdiv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
|
|
|
|
unsigned long *prate,
|
|
|
|
struct meson_sclk_div_data *sclk)
|
|
|
|
{
|
|
|
|
struct clk_hw *parent = clk_hw_get_parent(hw);
|
|
|
|
int bestdiv = 0, i;
|
|
|
|
unsigned long maxdiv, now, parent_now;
|
|
|
|
unsigned long best = 0, best_parent = 0;
|
|
|
|
|
|
|
|
if (!rate)
|
|
|
|
rate = 1;
|
|
|
|
|
|
|
|
maxdiv = sclk_div_maxdiv(sclk);
|
|
|
|
|
|
|
|
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT))
|
|
|
|
return sclk_div_getdiv(hw, rate, *prate, maxdiv);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The maximum divider we can use without overflowing
|
|
|
|
* unsigned long in rate * i below
|
|
|
|
*/
|
|
|
|
maxdiv = min(ULONG_MAX / rate, maxdiv);
|
|
|
|
|
|
|
|
for (i = 2; i <= maxdiv; i++) {
|
|
|
|
/*
|
|
|
|
* It's the most ideal case if the requested rate can be
|
|
|
|
* divided from parent clock without needing to change
|
|
|
|
* parent rate, so return the divider immediately.
|
|
|
|
*/
|
|
|
|
if (rate * i == *prate)
|
|
|
|
return i;
|
|
|
|
|
|
|
|
parent_now = clk_hw_round_rate(parent, rate * i);
|
|
|
|
now = DIV_ROUND_UP_ULL((u64)parent_now, i);
|
|
|
|
|
|
|
|
if (abs(rate - now) < abs(rate - best)) {
|
|
|
|
bestdiv = i;
|
|
|
|
best = now;
|
|
|
|
best_parent = parent_now;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!bestdiv)
|
|
|
|
bestdiv = sclk_div_maxdiv(sclk);
|
|
|
|
else
|
|
|
|
*prate = best_parent;
|
|
|
|
|
|
|
|
return bestdiv;
|
|
|
|
}
|
|
|
|
|
2022-12-26 05:26:31 +08:00
|
|
|
static int sclk_div_determine_rate(struct clk_hw *hw,
|
|
|
|
struct clk_rate_request *req)
|
2018-05-23 00:34:55 +08:00
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
int div;
|
|
|
|
|
2022-12-26 05:26:31 +08:00
|
|
|
div = sclk_div_bestdiv(hw, req->rate, &req->best_parent_rate, sclk);
|
|
|
|
req->rate = DIV_ROUND_UP_ULL((u64)req->best_parent_rate, div);
|
2018-05-23 00:34:55 +08:00
|
|
|
|
2022-12-26 05:26:31 +08:00
|
|
|
return 0;
|
2018-05-23 00:34:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void sclk_apply_ratio(struct clk_regmap *clk,
|
|
|
|
struct meson_sclk_div_data *sclk)
|
|
|
|
{
|
|
|
|
unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div *
|
|
|
|
sclk->cached_duty.num,
|
|
|
|
sclk->cached_duty.den);
|
|
|
|
|
|
|
|
if (hi)
|
|
|
|
hi -= 1;
|
|
|
|
|
|
|
|
meson_parm_write(clk->map, &sclk->hi, hi);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_set_duty_cycle(struct clk_hw *hw,
|
|
|
|
struct clk_duty *duty)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
|
|
|
|
if (MESON_PARM_APPLICABLE(&sclk->hi)) {
|
|
|
|
memcpy(&sclk->cached_duty, duty, sizeof(*duty));
|
|
|
|
sclk_apply_ratio(clk, sclk);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_get_duty_cycle(struct clk_hw *hw,
|
|
|
|
struct clk_duty *duty)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
int hi;
|
|
|
|
|
|
|
|
if (!MESON_PARM_APPLICABLE(&sclk->hi)) {
|
|
|
|
duty->num = 1;
|
|
|
|
duty->den = 2;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
hi = meson_parm_read(clk->map, &sclk->hi);
|
|
|
|
duty->num = hi + 1;
|
|
|
|
duty->den = sclk->cached_div;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sclk_apply_divider(struct clk_regmap *clk,
|
|
|
|
struct meson_sclk_div_data *sclk)
|
|
|
|
{
|
|
|
|
if (MESON_PARM_APPLICABLE(&sclk->hi))
|
|
|
|
sclk_apply_ratio(clk, sclk);
|
|
|
|
|
|
|
|
meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
|
|
unsigned long prate)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
unsigned long maxdiv = sclk_div_maxdiv(sclk);
|
|
|
|
|
|
|
|
sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv);
|
|
|
|
|
|
|
|
if (clk_hw_is_enabled(hw))
|
|
|
|
sclk_apply_divider(clk, sclk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long sclk_div_recalc_rate(struct clk_hw *hw,
|
|
|
|
unsigned long prate)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
|
|
|
|
return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_enable(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
|
|
|
|
sclk_apply_divider(clk, sclk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sclk_div_disable(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
|
|
|
|
meson_parm_write(clk->map, &sclk->div, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sclk_div_is_enabled(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
|
|
|
|
if (meson_parm_read(clk->map, &sclk->div))
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-09-24 20:39:53 +08:00
|
|
|
static int sclk_div_init(struct clk_hw *hw)
|
2018-05-23 00:34:55 +08:00
|
|
|
{
|
|
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
|
|
struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
|
|
|
|
unsigned int val;
|
|
|
|
|
|
|
|
val = meson_parm_read(clk->map, &sclk->div);
|
|
|
|
|
|
|
|
/* if the divider is initially disabled, assume max */
|
|
|
|
if (!val)
|
|
|
|
sclk->cached_div = sclk_div_maxdiv(sclk);
|
|
|
|
else
|
|
|
|
sclk->cached_div = val + 1;
|
|
|
|
|
|
|
|
sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
|
2019-09-24 20:39:53 +08:00
|
|
|
|
|
|
|
return 0;
|
2018-05-23 00:34:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
const struct clk_ops meson_sclk_div_ops = {
|
|
|
|
.recalc_rate = sclk_div_recalc_rate,
|
2022-12-26 05:26:31 +08:00
|
|
|
.determine_rate = sclk_div_determine_rate,
|
2018-05-23 00:34:55 +08:00
|
|
|
.set_rate = sclk_div_set_rate,
|
|
|
|
.enable = sclk_div_enable,
|
|
|
|
.disable = sclk_div_disable,
|
|
|
|
.is_enabled = sclk_div_is_enabled,
|
|
|
|
.get_duty_cycle = sclk_div_get_duty_cycle,
|
|
|
|
.set_duty_cycle = sclk_div_set_duty_cycle,
|
|
|
|
.init = sclk_div_init,
|
|
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(meson_sclk_div_ops);
|
clk: meson: rework and clean drivers dependencies
Initially, the meson clock directory only hosted 2 controllers drivers,
for meson8 and gxbb. At the time, both used the same set of clock drivers
so managing the dependencies was not a big concern.
Since this ancient time, entropy did its job, controllers with different
requirement and specific clock drivers have been added. Unfortunately, we
did not do a great job at managing the dependencies between the
controllers and the different clock drivers. Some drivers, such as
clk-phase or vid-pll-div, are compiled even if they are useless on the
target (meson8). As we are adding new controllers, we need to be able to
pick a driver w/o pulling the whole thing.
The patch aims to clean things up by:
* providing a dedicated CONFIG_ for each clock drivers
* allowing clock drivers to be compiled as a modules, if possible
* stating explicitly which drivers are required by each controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Amlogic Sample divider driver");
|
|
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|