OpenCloudOS-Kernel/include/linux/mhi.h

446 lines
14 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
*/
#ifndef _MHI_H_
#define _MHI_H_
#include <linux/device.h>
#include <linux/dma-direction.h>
#include <linux/mutex.h>
#include <linux/rwlock_types.h>
#include <linux/slab.h>
#include <linux/spinlock_types.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
struct mhi_chan;
struct mhi_event;
struct mhi_ctxt;
struct mhi_cmd;
struct mhi_buf_info;
/**
* enum mhi_callback - MHI callback
* @MHI_CB_IDLE: MHI entered idle state
* @MHI_CB_PENDING_DATA: New data available for client to process
* @MHI_CB_LPM_ENTER: MHI host entered low power mode
* @MHI_CB_LPM_EXIT: MHI host about to exit low power mode
* @MHI_CB_EE_RDDM: MHI device entered RDDM exec env
* @MHI_CB_EE_MISSION_MODE: MHI device entered Mission Mode exec env
* @MHI_CB_SYS_ERROR: MHI device entered error state (may recover)
* @MHI_CB_FATAL_ERROR: MHI device entered fatal error state
*/
enum mhi_callback {
MHI_CB_IDLE,
MHI_CB_PENDING_DATA,
MHI_CB_LPM_ENTER,
MHI_CB_LPM_EXIT,
MHI_CB_EE_RDDM,
MHI_CB_EE_MISSION_MODE,
MHI_CB_SYS_ERROR,
MHI_CB_FATAL_ERROR,
};
/**
* enum mhi_flags - Transfer flags
* @MHI_EOB: End of buffer for bulk transfer
* @MHI_EOT: End of transfer
* @MHI_CHAIN: Linked transfer
*/
enum mhi_flags {
MHI_EOB,
MHI_EOT,
MHI_CHAIN,
};
/**
* enum mhi_device_type - Device types
* @MHI_DEVICE_XFER: Handles data transfer
* @MHI_DEVICE_CONTROLLER: Control device
*/
enum mhi_device_type {
MHI_DEVICE_XFER,
MHI_DEVICE_CONTROLLER,
};
/**
* enum mhi_ch_type - Channel types
* @MHI_CH_TYPE_INVALID: Invalid channel type
* @MHI_CH_TYPE_OUTBOUND: Outbound channel to the device
* @MHI_CH_TYPE_INBOUND: Inbound channel from the device
* @MHI_CH_TYPE_INBOUND_COALESCED: Coalesced channel for the device to combine
* multiple packets and send them as a single
* large packet to reduce CPU consumption
*/
enum mhi_ch_type {
MHI_CH_TYPE_INVALID = 0,
MHI_CH_TYPE_OUTBOUND = DMA_TO_DEVICE,
MHI_CH_TYPE_INBOUND = DMA_FROM_DEVICE,
MHI_CH_TYPE_INBOUND_COALESCED = 3,
};
/**
* enum mhi_ee_type - Execution environment types
* @MHI_EE_PBL: Primary Bootloader
* @MHI_EE_SBL: Secondary Bootloader
* @MHI_EE_AMSS: Modem, aka the primary runtime EE
* @MHI_EE_RDDM: Ram dump download mode
* @MHI_EE_WFW: WLAN firmware mode
* @MHI_EE_PTHRU: Passthrough
* @MHI_EE_EDL: Embedded downloader
*/
enum mhi_ee_type {
MHI_EE_PBL,
MHI_EE_SBL,
MHI_EE_AMSS,
MHI_EE_RDDM,
MHI_EE_WFW,
MHI_EE_PTHRU,
MHI_EE_EDL,
MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */
MHI_EE_NOT_SUPPORTED,
MHI_EE_MAX,
};
/**
* enum mhi_ch_ee_mask - Execution environment mask for channel
* @MHI_CH_EE_PBL: Allow channel to be used in PBL EE
* @MHI_CH_EE_SBL: Allow channel to be used in SBL EE
* @MHI_CH_EE_AMSS: Allow channel to be used in AMSS EE
* @MHI_CH_EE_RDDM: Allow channel to be used in RDDM EE
* @MHI_CH_EE_PTHRU: Allow channel to be used in PTHRU EE
* @MHI_CH_EE_WFW: Allow channel to be used in WFW EE
* @MHI_CH_EE_EDL: Allow channel to be used in EDL EE
*/
enum mhi_ch_ee_mask {
MHI_CH_EE_PBL = BIT(MHI_EE_PBL),
MHI_CH_EE_SBL = BIT(MHI_EE_SBL),
MHI_CH_EE_AMSS = BIT(MHI_EE_AMSS),
MHI_CH_EE_RDDM = BIT(MHI_EE_RDDM),
MHI_CH_EE_PTHRU = BIT(MHI_EE_PTHRU),
MHI_CH_EE_WFW = BIT(MHI_EE_WFW),
MHI_CH_EE_EDL = BIT(MHI_EE_EDL),
};
/**
* enum mhi_er_data_type - Event ring data types
* @MHI_ER_DATA: Only client data over this ring
* @MHI_ER_CTRL: MHI control data and client data
*/
enum mhi_er_data_type {
MHI_ER_DATA,
MHI_ER_CTRL,
};
/**
* enum mhi_db_brst_mode - Doorbell mode
* @MHI_DB_BRST_DISABLE: Burst mode disable
* @MHI_DB_BRST_ENABLE: Burst mode enable
*/
enum mhi_db_brst_mode {
MHI_DB_BRST_DISABLE = 0x2,
MHI_DB_BRST_ENABLE = 0x3,
};
/**
* struct mhi_channel_config - Channel configuration structure for controller
* @name: The name of this channel
* @num: The number assigned to this channel
* @num_elements: The number of elements that can be queued to this channel
* @local_elements: The local ring length of the channel
* @event_ring: The event rung index that services this channel
* @dir: Direction that data may flow on this channel
* @type: Channel type
* @ee_mask: Execution Environment mask for this channel
* @pollcfg: Polling configuration for burst mode. 0 is default. milliseconds
for UL channels, multiple of 8 ring elements for DL channels
* @doorbell: Doorbell mode
* @lpm_notify: The channel master requires low power mode notifications
* @offload_channel: The client manages the channel completely
* @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
* @auto_queue: Framework will automatically queue buffers for DL traffic
* @auto_start: Automatically start (open) this channel
* @wake-capable: Channel capable of waking up the system
*/
struct mhi_channel_config {
char *name;
u32 num;
u32 num_elements;
u32 local_elements;
u32 event_ring;
enum dma_data_direction dir;
enum mhi_ch_type type;
u32 ee_mask;
u32 pollcfg;
enum mhi_db_brst_mode doorbell;
bool lpm_notify;
bool offload_channel;
bool doorbell_mode_switch;
bool auto_queue;
bool auto_start;
bool wake_capable;
};
/**
* struct mhi_event_config - Event ring configuration structure for controller
* @num_elements: The number of elements that can be queued to this ring
* @irq_moderation_ms: Delay irq for additional events to be aggregated
* @irq: IRQ associated with this ring
* @channel: Dedicated channel number. U32_MAX indicates a non-dedicated ring
* @priority: Priority of this ring. Use 1 for now
* @mode: Doorbell mode
* @data_type: Type of data this ring will process
* @hardware_event: This ring is associated with hardware channels
* @client_managed: This ring is client managed
* @offload_channel: This ring is associated with an offloaded channel
*/
struct mhi_event_config {
u32 num_elements;
u32 irq_moderation_ms;
u32 irq;
u32 channel;
u32 priority;
enum mhi_db_brst_mode mode;
enum mhi_er_data_type data_type;
bool hardware_event;
bool client_managed;
bool offload_channel;
};
/**
* struct mhi_controller_config - Root MHI controller configuration
* @max_channels: Maximum number of channels supported
* @timeout_ms: Timeout value for operations. 0 means use default
* @buf_len: Size of automatically allocated buffers. 0 means use default
* @num_channels: Number of channels defined in @ch_cfg
* @ch_cfg: Array of defined channels
* @num_events: Number of event rings defined in @event_cfg
* @event_cfg: Array of defined event rings
* @use_bounce_buf: Use a bounce buffer pool due to limited DDR access
* @m2_no_db: Host is not allowed to ring DB in M2 state
*/
struct mhi_controller_config {
u32 max_channels;
u32 timeout_ms;
u32 buf_len;
u32 num_channels;
struct mhi_channel_config *ch_cfg;
u32 num_events;
struct mhi_event_config *event_cfg;
bool use_bounce_buf;
bool m2_no_db;
};
/**
* struct mhi_controller - Master MHI controller structure
* @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI
* controller (required)
* @mhi_dev: MHI device instance for the controller
* @regs: Base address of MHI MMIO register space (required)
* @bhi: Points to base of MHI BHI register space
* @wake_db: MHI WAKE doorbell register address
* @iova_start: IOMMU starting address for data (required)
* @iova_stop: IOMMU stop address for data (required)
* @fw_image: Firmware image name for normal booting (required)
* @edl_image: Firmware image name for emergency download mode (optional)
* @sbl_size: SBL image size downloaded through BHIe (optional)
* @seg_len: BHIe vector size (optional)
* @mhi_chan: Points to the channel configuration table
* @lpm_chans: List of channels that require LPM notifications
* @irq: base irq # to request (required)
* @max_chan: Maximum number of channels the controller supports
* @total_ev_rings: Total # of event rings allocated
* @hw_ev_rings: Number of hardware event rings
* @sw_ev_rings: Number of software event rings
* @nr_irqs_req: Number of IRQs required to operate (optional)
* @nr_irqs: Number of IRQ allocated by bus master (required)
* @mhi_event: MHI event ring configurations table
* @mhi_cmd: MHI command ring configurations table
* @mhi_ctxt: MHI device context, shared memory between host and device
* @pm_mutex: Mutex for suspend/resume operation
* @pm_lock: Lock for protecting MHI power management state
* @timeout_ms: Timeout in ms for state transitions
* @pm_state: MHI power management state
* @db_access: DB access states
* @ee: MHI device execution environment
* @dev_wake: Device wakeup count
* @pending_pkts: Pending packets for the controller
* @transition_list: List of MHI state transitions
* @transition_lock: Lock for protecting MHI state transition list
* @wlock: Lock for protecting device wakeup
* @st_worker: State transition worker
* @fw_worker: Firmware download worker
* @syserr_worker: System error worker
* @state_event: State change event
* @status_cb: CB function to notify power states of the device (required)
* @link_status: CB function to query link status of the device (required)
* @wake_get: CB function to assert device wake (optional)
* @wake_put: CB function to de-assert device wake (optional)
* @wake_toggle: CB function to assert and de-assert device wake (optional)
* @runtime_get: CB function to controller runtime resume (required)
* @runtimet_put: CB function to decrement pm usage (required)
* @buffer_len: Bounce buffer length
* @bounce_buf: Use of bounce buffer
* @fbc_download: MHI host needs to do complete image transfer (optional)
* @pre_init: MHI host needs to do pre-initialization before power up
* @wake_set: Device wakeup set flag
*
* Fields marked as (required) need to be populated by the controller driver
* before calling mhi_register_controller(). For the fields marked as (optional)
* they can be populated depending on the usecase.
*/
struct mhi_controller {
struct device *cntrl_dev;
struct mhi_device *mhi_dev;
void __iomem *regs;
void __iomem *bhi;
void __iomem *wake_db;
dma_addr_t iova_start;
dma_addr_t iova_stop;
const char *fw_image;
const char *edl_image;
size_t sbl_size;
size_t seg_len;
struct mhi_chan *mhi_chan;
struct list_head lpm_chans;
int *irq;
u32 max_chan;
u32 total_ev_rings;
u32 hw_ev_rings;
u32 sw_ev_rings;
u32 nr_irqs_req;
u32 nr_irqs;
struct mhi_event *mhi_event;
struct mhi_cmd *mhi_cmd;
struct mhi_ctxt *mhi_ctxt;
struct mutex pm_mutex;
rwlock_t pm_lock;
u32 timeout_ms;
u32 pm_state;
u32 db_access;
enum mhi_ee_type ee;
atomic_t dev_wake;
atomic_t pending_pkts;
struct list_head transition_list;
spinlock_t transition_lock;
spinlock_t wlock;
struct work_struct st_worker;
struct work_struct fw_worker;
struct work_struct syserr_worker;
wait_queue_head_t state_event;
void (*status_cb)(struct mhi_controller *mhi_cntrl,
enum mhi_callback cb);
int (*link_status)(struct mhi_controller *mhi_cntrl);
void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override);
void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override);
void (*wake_toggle)(struct mhi_controller *mhi_cntrl);
int (*runtime_get)(struct mhi_controller *mhi_cntrl);
void (*runtime_put)(struct mhi_controller *mhi_cntrl);
size_t buffer_len;
bool bounce_buf;
bool fbc_download;
bool pre_init;
bool wake_set;
};
/**
* struct mhi_device - Structure representing a MHI device which binds
* to channels
* @id: Pointer to MHI device ID struct
* @chan_name: Name of the channel to which the device binds
* @mhi_cntrl: Controller the device belongs to
* @ul_chan: UL channel for the device
* @dl_chan: DL channel for the device
* @dev: Driver model device node for the MHI device
* @dev_type: MHI device type
* @ul_chan_id: MHI channel id for UL transfer
* @dl_chan_id: MHI channel id for DL transfer
* @dev_wake: Device wakeup counter
*/
struct mhi_device {
const struct mhi_device_id *id;
const char *chan_name;
struct mhi_controller *mhi_cntrl;
struct mhi_chan *ul_chan;
struct mhi_chan *dl_chan;
struct device dev;
enum mhi_device_type dev_type;
int ul_chan_id;
int dl_chan_id;
u32 dev_wake;
};
/**
* struct mhi_result - Completed buffer information
* @buf_addr: Address of data buffer
* @bytes_xferd: # of bytes transferred
* @dir: Channel direction
* @transaction_status: Status of last transaction
*/
struct mhi_result {
void *buf_addr;
size_t bytes_xferd;
enum dma_data_direction dir;
int transaction_status;
};
/**
* struct mhi_driver - Structure representing a MHI client driver
* @probe: CB function for client driver probe function
* @remove: CB function for client driver remove function
* @ul_xfer_cb: CB function for UL data transfer
* @dl_xfer_cb: CB function for DL data transfer
* @status_cb: CB functions for asynchronous status
* @driver: Device driver model driver
*/
struct mhi_driver {
const struct mhi_device_id *id_table;
int (*probe)(struct mhi_device *mhi_dev,
const struct mhi_device_id *id);
void (*remove)(struct mhi_device *mhi_dev);
void (*ul_xfer_cb)(struct mhi_device *mhi_dev,
struct mhi_result *result);
void (*dl_xfer_cb)(struct mhi_device *mhi_dev,
struct mhi_result *result);
void (*status_cb)(struct mhi_device *mhi_dev, enum mhi_callback mhi_cb);
struct device_driver driver;
};
#define to_mhi_driver(drv) container_of(drv, struct mhi_driver, driver)
#define to_mhi_device(dev) container_of(dev, struct mhi_device, dev)
/**
* mhi_register_controller - Register MHI controller
* @mhi_cntrl: MHI controller to register
* @config: Configuration to use for the controller
*/
int mhi_register_controller(struct mhi_controller *mhi_cntrl,
struct mhi_controller_config *config);
/**
* mhi_unregister_controller - Unregister MHI controller
* @mhi_cntrl: MHI controller to unregister
*/
void mhi_unregister_controller(struct mhi_controller *mhi_cntrl);
/**
* mhi_driver_register - Register driver with MHI framework
* @mhi_drv: Driver associated with the device
*/
int mhi_driver_register(struct mhi_driver *mhi_drv);
/**
* mhi_driver_unregister - Unregister a driver for mhi_devices
* @mhi_drv: Driver associated with the device
*/
void mhi_driver_unregister(struct mhi_driver *mhi_drv);
#endif /* _MHI_H_ */