OpenCloudOS-Kernel/drivers/scsi/qla2xxx/tcm_qla2xxx.h

83 lines
2.5 KiB
C
Raw Normal View History

[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
#include <target/target_core_base.h>
#include <linux/btree.h>
/* length of ASCII WWPNs including pad */
#define TCM_QLA2XXX_NAMELEN 32
qla2xxx: Convert to percpu_ida session tag pre-allocation This patch converts qla2xxx target code to use generic percpu_ida tag allocation provided by target-core, thus removing the original kmem_cache_zalloc() for each struct qla_tgt_cmd descriptor in the incoming ATIO packet fast-path. This includes the conversion of qlt_handle_cmd_for_atio() to perform qla_tgt_sess lookup before dispatching a command descriptor into qla_tgt_wq process context, along with handling the case where no active session exists, and subsequently kicking off a seperate process context for qlt_create_sess_from_atio() to create a new one. It also includes moving tag allocation into generic code within qlt_get_tag(), so that the same logic can be shared between qlt_handle_cmd_for_atio() + qlt_create_sess_from_atio() contexts. Also, __qlt_do_work() has been made generic between both normal process context in qlt_do_work() + qlt_create_sess_from_atio(). Next, update qlt_free_cmd() to release the percpu-ida tags, and drop the now-unused global qla_tgt_cmd_cachep. Finally in tcm_qla2xxx code, tcm_qla2xxx_check_initiator_node_acl() has been updated to use transport_init_session_tags() along with a hardcoded TCM_QLA2XXX_DEFAULT_TAGS=2088 as the number of qla_tgt_cmd descriptors to pre-allocate per qla_tgt_sess instance. (Use ha->fw_xcb_count if available to calculate num_tags, and also factor in extra pad tags - Quinn) Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Roland Dreier <roland@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-23 17:00:56 +08:00
/*
* Number of pre-allocated per-session tags, based upon the worst-case
* per port number of iocbs
*/
#define TCM_QLA2XXX_DEFAULT_TAGS 2088
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
#include "qla_target.h"
struct tcm_qla2xxx_nacl {
struct se_node_acl se_node_acl;
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
/* From libfc struct fc_rport->port_id */
u32 nport_id;
/* Binary World Wide unique Node Name for remote FC Initiator Nport */
u64 nport_wwnn;
/* ASCII formatted WWPN for FC Initiator Nport */
char nport_name[TCM_QLA2XXX_NAMELEN];
/* Pointer to fc_port */
struct fc_port *fc_port;
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
/* Pointer to TCM FC nexus */
struct se_session *nport_nexus;
};
struct tcm_qla2xxx_tpg_attrib {
int generate_node_acls;
int cache_dynamic_acls;
int demo_mode_write_protect;
int prod_mode_write_protect;
int demo_mode_login_only;
int fabric_prot_type;
int jam_host;
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
};
struct tcm_qla2xxx_tpg {
/* FC lport target portal group tag for TCM */
u16 lport_tpgt;
/* Atomic bit to determine TPG active status */
atomic_t lport_tpg_enabled;
/* Pointer back to tcm_qla2xxx_lport */
struct tcm_qla2xxx_lport *lport;
/* Used by tcm_qla2xxx_tpg_attrib_cit */
struct tcm_qla2xxx_tpg_attrib tpg_attrib;
/* Returned by tcm_qla2xxx_make_tpg() */
struct se_portal_group se_tpg;
/* Items for dealing with configfs_depend_item */
struct completion tpg_base_comp;
struct work_struct tpg_base_work;
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
};
struct tcm_qla2xxx_fc_loopid {
struct se_node_acl *se_nacl;
};
struct tcm_qla2xxx_lport {
/* Binary World Wide unique Port Name for FC Target Lport */
u64 lport_wwpn;
/* Binary World Wide unique Port Name for FC NPIV Target Lport */
u64 lport_npiv_wwpn;
/* Binary World Wide unique Node Name for FC NPIV Target Lport */
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
2012-10-12 04:41:31 +08:00
/* ASCII formatted naa WWPN for VPD page 83 etc */
char lport_naa_name[TCM_QLA2XXX_NAMELEN];
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:29 +08:00
/* map for fc_port pointers in 24-bit FC Port ID space */
struct btree_head32 lport_fcport_map;
/* vmalloc-ed memory for fc_port pointers for 16-bit FC loop ID */
struct tcm_qla2xxx_fc_loopid *lport_loopid_map;
/* Pointer to struct scsi_qla_host from qla2xxx LLD */
struct scsi_qla_host *qla_vha;
/* Pointer to struct qla_tgt pointer */
struct qla_tgt lport_qla_tgt;
/* Pointer to TPG=1 for non NPIV mode */
struct tcm_qla2xxx_tpg *tpg_1;
/* Returned by tcm_qla2xxx_make_lport() */
struct se_wwn lport_wwn;
};