UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/imx6q-sbc6x.dts

95 lines
2.1 KiB
Plaintext
Raw Normal View History

ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
/*
* Copyright 2013 Pavel Machek <pavel@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License V2.
*/
/dts-v1/;
#include "imx6q.dtsi"
/ {
model = "MicroSys sbc6x board";
compatible = "microsys,sbc6x", "fsl,imx6q";
memory {
reg = <0x10000000 0x80000000>;
};
};
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
&fec {
pinctrl-names = "default";
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
pinctrl-0 = <&pinctrl_enet>;
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
phy-mode = "rgmii";
status = "okay";
};
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
&iomuxc {
imx6q-sbc6x {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
};
};
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
&uart1 {
pinctrl-names = "default";
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
pinctrl-0 = <&pinctrl_uart1>;
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
status = "okay";
};
&usbotg {
pinctrl-names = "default";
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
pinctrl-0 = <&pinctrl_usbotg>;
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
disable-over-current;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
ARM: dts: imx6qdl: make pinctrl nodes board specific Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 15:36:09 +08:00
pinctrl-0 = <&pinctrl_usdhc3>;
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 20:24:22 +08:00
status = "okay";
};