OpenCloudOS-Kernel/drivers/iommu/intel/iommu.c

5804 lines
146 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright © 2006-2014 Intel Corporation.
*
* Authors: David Woodhouse <dwmw2@infradead.org>,
* Ashok Raj <ashok.raj@intel.com>,
* Shaohua Li <shaohua.li@intel.com>,
* Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
* Fenghua Yu <fenghua.yu@intel.com>
* Joerg Roedel <jroedel@suse.de>
*/
#define pr_fmt(fmt) "DMAR: " fmt
#define dev_fmt(fmt) pr_fmt(fmt)
#include <linux/init.h>
#include <linux/bitmap.h>
#include <linux/debugfs.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/dmar.h>
#include <linux/dma-map-ops.h>
#include <linux/mempool.h>
#include <linux/memory.h>
#include <linux/cpu.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/iova.h>
#include <linux/iommu.h>
#include <linux/dma-iommu.h>
#include <linux/intel-iommu.h>
#include <linux/syscore_ops.h>
#include <linux/tboot.h>
#include <linux/dmi.h>
#include <linux/pci-ats.h>
#include <linux/memblock.h>
#include <linux/dma-direct.h>
#include <linux/crash_dump.h>
mm: replace all open encodings for NUMA_NO_NODE Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 07:42:58 +08:00
#include <linux/numa.h>
#include <asm/irq_remapping.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "../irq_remapping.h"
#include "pasid.h"
iommu/vt-d: Audit IOMMU Capabilities and add helper functions Audit IOMMU Capability/Extended Capability and check if the IOMMUs have the consistent value for features. Report out or scale to the lowest supported when IOMMU features have incompatibility among IOMMUs. Report out features when below features are mismatched: - First Level 5 Level Paging Support (FL5LP) - First Level 1 GByte Page Support (FL1GP) - Read Draining (DRD) - Write Draining (DWD) - Page Selective Invalidation (PSI) - Zero Length Read (ZLR) - Caching Mode (CM) - Protected High/Low-Memory Region (PHMR/PLMR) - Required Write-Buffer Flushing (RWBF) - Advanced Fault Logging (AFL) - RID-PASID Support (RPS) - Scalable Mode Page Walk Coherency (SMPWC) - First Level Translation Support (FLTS) - Second Level Translation Support (SLTS) - No Write Flag Support (NWFS) - Second Level Accessed/Dirty Support (SLADS) - Virtual Command Support (VCS) - Scalable Mode Translation Support (SMTS) - Device TLB Invalidation Throttle (DIT) - Page Drain Support (PDS) - Process Address Space ID Support (PASID) - Extended Accessed Flag Support (EAFS) - Supervisor Request Support (SRS) - Execute Request Support (ERS) - Page Request Support (PRS) - Nested Translation Support (NEST) - Snoop Control (SC) - Pass Through (PT) - Device TLB Support (DT) - Queued Invalidation (QI) - Page walk Coherency (C) Set capability to the lowest supported when below features are mismatched: - Maximum Address Mask Value (MAMV) - Number of Fault Recording Registers (NFR) - Second Level Large Page Support (SLLPS) - Fault Recording Offset (FRO) - Maximum Guest Address Width (MGAW) - Supported Adjusted Guest Address Width (SAGAW) - Number of Domains supported (NDOMS) - Pasid Size Supported (PSS) - Maximum Handle Mask Value (MHMV) - IOTLB Register Offset (IRO) Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04 09:43:56 +08:00
#include "cap_audit.h"
#define ROOT_SIZE VTD_PAGE_SIZE
#define CONTEXT_SIZE VTD_PAGE_SIZE
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
#define IOAPIC_RANGE_END (0xfeefffff)
#define IOVA_START_ADDR (0x1000)
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 57
#define MAX_AGAW_WIDTH 64
#define MAX_AGAW_PFN_WIDTH (MAX_AGAW_WIDTH - VTD_PAGE_SHIFT)
#define __DOMAIN_MAX_PFN(gaw) ((((uint64_t)1) << ((gaw) - VTD_PAGE_SHIFT)) - 1)
#define __DOMAIN_MAX_ADDR(gaw) ((((uint64_t)1) << (gaw)) - 1)
/* We limit DOMAIN_MAX_PFN to fit in an unsigned long, and DOMAIN_MAX_ADDR
to match. That way, we can use 'unsigned long' for PFNs with impunity. */
#define DOMAIN_MAX_PFN(gaw) ((unsigned long) min_t(uint64_t, \
__DOMAIN_MAX_PFN(gaw), (unsigned long)-1))
#define DOMAIN_MAX_ADDR(gaw) (((uint64_t)__DOMAIN_MAX_PFN(gaw)) << VTD_PAGE_SHIFT)
/* IO virtual address start page frame number */
#define IOVA_START_PFN (1)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT)
/* page table handling */
#define LEVEL_STRIDE (9)
#define LEVEL_MASK (((u64)1 << LEVEL_STRIDE) - 1)
/*
* This bitmap is used to advertise the page sizes our hardware support
* to the IOMMU core, which will then use this information to split
* physically contiguous memory regions it is mapping into page sizes
* that we support.
*
* Traditionally the IOMMU core just handed us the mappings directly,
* after making sure the size is an order of a 4KiB page and that the
* mapping has natural alignment.
*
* To retain this behavior, we currently advertise that we support
* all page sizes that are an order of 4KiB.
*
* If at some point we'd like to utilize the IOMMU core's new behavior,
* we could change this to advertise the real page sizes we support.
*/
#define INTEL_IOMMU_PGSIZES (~0xFFFUL)
static inline int agaw_to_level(int agaw)
{
return agaw + 2;
}
static inline int agaw_to_width(int agaw)
{
return min_t(int, 30 + agaw * LEVEL_STRIDE, MAX_AGAW_WIDTH);
}
static inline int width_to_agaw(int width)
{
return DIV_ROUND_UP(width - 30, LEVEL_STRIDE);
}
static inline unsigned int level_to_offset_bits(int level)
{
return (level - 1) * LEVEL_STRIDE;
}
static inline int pfn_level_offset(u64 pfn, int level)
{
return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
}
static inline u64 level_mask(int level)
{
return -1ULL << level_to_offset_bits(level);
}
static inline u64 level_size(int level)
{
return 1ULL << level_to_offset_bits(level);
}
static inline u64 align_to_level(u64 pfn, int level)
{
return (pfn + level_size(level) - 1) & level_mask(level);
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
static inline unsigned long lvl_to_nr_pages(unsigned int lvl)
{
return 1UL << min_t(int, (lvl - 1) * LEVEL_STRIDE, MAX_AGAW_PFN_WIDTH);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
are never going to work. */
static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
{
return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
}
static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
{
return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
}
static inline unsigned long page_to_dma_pfn(struct page *pg)
{
return mm_to_dma_pfn(page_to_pfn(pg));
}
static inline unsigned long virt_to_dma_pfn(void *p)
{
return page_to_dma_pfn(virt_to_page(p));
}
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
static void __init check_tylersburg_isoch(void);
static int rwbf_quirk;
/*
* set to 1 to panic kernel if can't successfully enable VT-d
* (used when kernel is launched w/ TXT)
*/
static int force_on = 0;
static int intel_iommu_tboot_noforce;
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
static int no_platform_optin;
#define ROOT_ENTRY_NR (VTD_PAGE_SIZE/sizeof(struct root_entry))
/*
* Take a root_entry and return the Lower Context Table Pointer (LCTP)
* if marked present.
*/
static phys_addr_t root_entry_lctp(struct root_entry *re)
{
if (!(re->lo & 1))
return 0;
return re->lo & VTD_PAGE_MASK;
}
/*
* Take a root_entry and return the Upper Context Table Pointer (UCTP)
* if marked present.
*/
static phys_addr_t root_entry_uctp(struct root_entry *re)
{
if (!(re->hi & 1))
return 0;
return re->hi & VTD_PAGE_MASK;
}
static inline void context_clear_pasid_enable(struct context_entry *context)
{
context->lo &= ~(1ULL << 11);
}
static inline bool context_pasid_enabled(struct context_entry *context)
{
return !!(context->lo & (1ULL << 11));
}
static inline void context_set_copied(struct context_entry *context)
{
context->hi |= (1ull << 3);
}
static inline bool context_copied(struct context_entry *context)
{
return !!(context->hi & (1ULL << 3));
}
static inline bool __context_present(struct context_entry *context)
{
return (context->lo & 1);
}
bool context_present(struct context_entry *context)
{
return context_pasid_enabled(context) ?
__context_present(context) :
__context_present(context) && !context_copied(context);
}
static inline void context_set_present(struct context_entry *context)
{
context->lo |= 1;
}
static inline void context_set_fault_enable(struct context_entry *context)
{
context->lo &= (((u64)-1) << 2) | 1;
}
static inline void context_set_translation_type(struct context_entry *context,
unsigned long value)
{
context->lo &= (((u64)-1) << 4) | 3;
context->lo |= (value & 3) << 2;
}
static inline void context_set_address_root(struct context_entry *context,
unsigned long value)
{
context->lo &= ~VTD_PAGE_MASK;
context->lo |= value & VTD_PAGE_MASK;
}
static inline void context_set_address_width(struct context_entry *context,
unsigned long value)
{
context->hi |= value & 7;
}
static inline void context_set_domain_id(struct context_entry *context,
unsigned long value)
{
context->hi |= (value & ((1 << 16) - 1)) << 8;
}
static inline int context_domain_id(struct context_entry *c)
{
return((c->hi >> 8) & 0xffff);
}
static inline void context_clear_entry(struct context_entry *context)
{
context->lo = 0;
context->hi = 0;
}
/*
* This domain is a statically identity mapping domain.
* 1. This domain creats a static 1:1 mapping to all usable memory.
* 2. It maps to each iommu if successful.
* 3. Each iommu mapps to this domain if successful.
*/
static struct dmar_domain *si_domain;
static int hw_pass_through = 1;
#define for_each_domain_iommu(idx, domain) \
for (idx = 0; idx < g_num_of_iommus; idx++) \
if (domain->iommu_refcnt[idx])
struct dmar_rmrr_unit {
struct list_head list; /* list of rmrr units */
struct acpi_dmar_header *hdr; /* ACPI header */
u64 base_address; /* reserved base address*/
u64 end_address; /* reserved end address */
struct dmar_dev_scope *devices; /* target devices */
int devices_cnt; /* target device count */
};
struct dmar_atsr_unit {
struct list_head list; /* list of ATSR units */
struct acpi_dmar_header *hdr; /* ACPI header */
struct dmar_dev_scope *devices; /* target devices */
int devices_cnt; /* target device count */
u8 include_all:1; /* include all ports */
};
struct dmar_satc_unit {
struct list_head list; /* list of SATC units */
struct acpi_dmar_header *hdr; /* ACPI header */
struct dmar_dev_scope *devices; /* target devices */
struct intel_iommu *iommu; /* the corresponding iommu */
int devices_cnt; /* target device count */
u8 atc_required:1; /* ATS is required */
};
static LIST_HEAD(dmar_atsr_units);
static LIST_HEAD(dmar_rmrr_units);
static LIST_HEAD(dmar_satc_units);
#define for_each_rmrr_units(rmrr) \
list_for_each_entry(rmrr, &dmar_rmrr_units, list)
/* bitmap for indexing intel_iommus */
static int g_num_of_iommus;
static void domain_exit(struct dmar_domain *domain);
static void domain_remove_dev_info(struct dmar_domain *domain);
static void dmar_remove_one_dev_info(struct device *dev);
static void __dmar_remove_one_dev_info(struct device_domain_info *info);
static int intel_iommu_attach_device(struct iommu_domain *domain,
struct device *dev);
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
dma_addr_t iova);
#ifdef CONFIG_INTEL_IOMMU_DEFAULT_ON
int dmar_disabled = 0;
#else
int dmar_disabled = 1;
#endif /* CONFIG_INTEL_IOMMU_DEFAULT_ON */
#ifdef CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
int intel_iommu_sm = 1;
#else
int intel_iommu_sm;
#endif /* CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON */
int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
static int dmar_forcedac;
static int intel_iommu_strict;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
static int intel_iommu_superpage = 1;
static int iommu_identity_mapping;
static int iommu_skip_te_disable;
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
#define IDENTMAP_GFX 2
#define IDENTMAP_AZALIA 4
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
int intel_iommu_gfx_mapped;
EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
#define DEFER_DEVICE_DOMAIN_INFO ((struct device_domain_info *)(-2))
struct device_domain_info *get_domain_info(struct device *dev)
{
struct device_domain_info *info;
if (!dev)
return NULL;
info = dev_iommu_priv_get(dev);
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
if (unlikely(info == DEFER_DEVICE_DOMAIN_INFO))
return NULL;
return info;
}
iommu/vt-d: debugfs: Add support to show page table internals Export page table internals of the domain attached to each device. Example of such dump on a Skylake machine: $ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct [ ... ] Device 0000:00:14.0 with pasid 0 @0x15f3d9000 IOVA_PFN PML5E PML4E 0x000000008ced0 | 0x0000000000000000 0x000000015f3da003 0x000000008ced1 | 0x0000000000000000 0x000000015f3da003 0x000000008ced2 | 0x0000000000000000 0x000000015f3da003 0x000000008ced3 | 0x0000000000000000 0x000000015f3da003 0x000000008ced4 | 0x0000000000000000 0x000000015f3da003 0x000000008ced5 | 0x0000000000000000 0x000000015f3da003 0x000000008ced6 | 0x0000000000000000 0x000000015f3da003 0x000000008ced7 | 0x0000000000000000 0x000000015f3da003 0x000000008ced8 | 0x0000000000000000 0x000000015f3da003 0x000000008ced9 | 0x0000000000000000 0x000000015f3da003 PDPE PDE PTE 0x000000015f3db003 0x000000015f3dc003 0x000000008ced0003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced1003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced2003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced3003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced4003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced5003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced6003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced7003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced8003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced9003 [ ... ] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-02 08:18:22 +08:00
DEFINE_SPINLOCK(device_domain_lock);
static LIST_HEAD(device_domain_list);
/*
* Iterate over elements in device_domain_list and call the specified
* callback @fn against each element.
*/
int for_each_device_domain(int (*fn)(struct device_domain_info *info,
void *data), void *data)
{
int ret = 0;
unsigned long flags;
struct device_domain_info *info;
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry(info, &device_domain_list, global) {
ret = fn(info, data);
if (ret) {
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
}
spin_unlock_irqrestore(&device_domain_lock, flags);
return 0;
}
const struct iommu_ops intel_iommu_ops;
static bool translation_pre_enabled(struct intel_iommu *iommu)
{
return (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED);
}
static void clear_translation_pre_enabled(struct intel_iommu *iommu)
{
iommu->flags &= ~VTD_FLAG_TRANS_PRE_ENABLED;
}
static void init_translation_status(struct intel_iommu *iommu)
{
u32 gsts;
gsts = readl(iommu->reg + DMAR_GSTS_REG);
if (gsts & DMA_GSTS_TES)
iommu->flags |= VTD_FLAG_TRANS_PRE_ENABLED;
}
static int __init intel_iommu_setup(char *str)
{
if (!str)
return -EINVAL;
while (*str) {
if (!strncmp(str, "on", 2)) {
dmar_disabled = 0;
pr_info("IOMMU enabled\n");
} else if (!strncmp(str, "off", 3)) {
dmar_disabled = 1;
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
no_platform_optin = 1;
pr_info("IOMMU disabled\n");
} else if (!strncmp(str, "igfx_off", 8)) {
dmar_map_gfx = 0;
pr_info("Disable GFX device mapping\n");
} else if (!strncmp(str, "forcedac", 8)) {
pr_info("Forcing DAC for PCI devices\n");
dmar_forcedac = 1;
} else if (!strncmp(str, "strict", 6)) {
pr_info("Disable batched IOTLB flush\n");
intel_iommu_strict = 1;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
intel_iommu_superpage = 0;
} else if (!strncmp(str, "sm_on", 5)) {
pr_info("Intel-IOMMU: scalable mode supported\n");
intel_iommu_sm = 1;
} else if (!strncmp(str, "tboot_noforce", 13)) {
pr_info("Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n");
intel_iommu_tboot_noforce = 1;
}
str += strcspn(str, ",");
while (*str == ',')
str++;
}
return 0;
}
__setup("intel_iommu=", intel_iommu_setup);
static struct kmem_cache *iommu_domain_cache;
static struct kmem_cache *iommu_devinfo_cache;
static struct dmar_domain* get_iommu_domain(struct intel_iommu *iommu, u16 did)
{
struct dmar_domain **domains;
int idx = did >> 8;
domains = iommu->domains[idx];
if (!domains)
return NULL;
return domains[did & 0xff];
}
static void set_iommu_domain(struct intel_iommu *iommu, u16 did,
struct dmar_domain *domain)
{
struct dmar_domain **domains;
int idx = did >> 8;
if (!iommu->domains[idx]) {
size_t size = 256 * sizeof(struct dmar_domain *);
iommu->domains[idx] = kzalloc(size, GFP_ATOMIC);
}
domains = iommu->domains[idx];
if (WARN_ON(!domains))
return;
else
domains[did & 0xff] = domain;
}
void *alloc_pgtable_page(int node)
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
{
struct page *page;
void *vaddr = NULL;
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
page = alloc_pages_node(node, GFP_ATOMIC | __GFP_ZERO, 0);
if (page)
vaddr = page_address(page);
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
return vaddr;
}
void free_pgtable_page(void *vaddr)
{
free_page((unsigned long)vaddr);
}
static inline void *alloc_domain_mem(void)
{
return kmem_cache_alloc(iommu_domain_cache, GFP_ATOMIC);
}
static void free_domain_mem(void *vaddr)
{
kmem_cache_free(iommu_domain_cache, vaddr);
}
static inline void * alloc_devinfo_mem(void)
{
return kmem_cache_alloc(iommu_devinfo_cache, GFP_ATOMIC);
}
static inline void free_devinfo_mem(void *vaddr)
{
kmem_cache_free(iommu_devinfo_cache, vaddr);
}
static inline int domain_type_is_si(struct dmar_domain *domain)
{
return domain->flags & DOMAIN_FLAG_STATIC_IDENTITY;
}
static inline bool domain_use_first_level(struct dmar_domain *domain)
{
return domain->flags & DOMAIN_FLAG_USE_FIRST_LEVEL;
}
static inline int domain_pfn_supported(struct dmar_domain *domain,
unsigned long pfn)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
return !(addr_width < BITS_PER_LONG && pfn >> addr_width);
}
static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
{
unsigned long sagaw;
int agaw = -1;
sagaw = cap_sagaw(iommu->cap);
for (agaw = width_to_agaw(max_gaw);
agaw >= 0; agaw--) {
if (test_bit(agaw, &sagaw))
break;
}
return agaw;
}
/*
* Calculate max SAGAW for each iommu.
*/
int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
{
return __iommu_calculate_agaw(iommu, MAX_AGAW_WIDTH);
}
/*
* calculate agaw for each iommu.
* "SAGAW" may be different across iommus, use a default agaw, and
* get a supported less agaw for iommus that don't support the default agaw.
*/
int iommu_calculate_agaw(struct intel_iommu *iommu)
{
return __iommu_calculate_agaw(iommu, DEFAULT_DOMAIN_ADDRESS_WIDTH);
}
/* This functionin only returns single iommu in a domain */
struct intel_iommu *domain_get_iommu(struct dmar_domain *domain)
{
int iommu_id;
/* si_domain and vm domain should not get here. */
if (WARN_ON(domain->domain.type != IOMMU_DOMAIN_DMA))
return NULL;
for_each_domain_iommu(iommu_id, domain)
break;
if (iommu_id < 0 || iommu_id >= g_num_of_iommus)
return NULL;
return g_iommus[iommu_id];
}
static inline bool iommu_paging_structure_coherency(struct intel_iommu *iommu)
{
return sm_supported(iommu) ?
ecap_smpwc(iommu->ecap) : ecap_coherent(iommu->ecap);
}
static void domain_update_iommu_coherency(struct dmar_domain *domain)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
bool found = false;
int i;
domain->iommu_coherency = 1;
for_each_domain_iommu(i, domain) {
found = true;
if (!iommu_paging_structure_coherency(g_iommus[i])) {
domain->iommu_coherency = 0;
break;
}
}
if (found)
return;
/* No hardware attached; use lowest common denominator */
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (!iommu_paging_structure_coherency(iommu)) {
domain->iommu_coherency = 0;
break;
}
}
rcu_read_unlock();
}
static int domain_update_iommu_snooping(struct intel_iommu *skip)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
int ret = 1;
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (iommu != skip) {
if (!ecap_sc_support(iommu->ecap)) {
ret = 0;
break;
}
}
}
rcu_read_unlock();
return ret;
}
static int domain_update_iommu_superpage(struct dmar_domain *domain,
struct intel_iommu *skip)
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
int mask = 0x3;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!intel_iommu_superpage) {
return 0;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* set iommu_superpage to the smallest common denominator */
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (iommu != skip) {
if (domain && domain_use_first_level(domain)) {
if (!cap_fl1gp_support(iommu->cap))
mask = 0x1;
} else {
mask &= cap_super_page_val(iommu->cap);
}
if (!mask)
break;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
}
rcu_read_unlock();
return fls(mask);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
static int domain_update_device_node(struct dmar_domain *domain)
{
struct device_domain_info *info;
int nid = NUMA_NO_NODE;
assert_spin_locked(&device_domain_lock);
if (list_empty(&domain->devices))
return NUMA_NO_NODE;
list_for_each_entry(info, &domain->devices, link) {
if (!info->dev)
continue;
/*
* There could possibly be multiple device numa nodes as devices
* within the same domain may sit behind different IOMMUs. There
* isn't perfect answer in such situation, so we select first
* come first served policy.
*/
nid = dev_to_node(info->dev);
if (nid != NUMA_NO_NODE)
break;
}
return nid;
}
static void domain_update_iotlb(struct dmar_domain *domain);
/* Some capabilities may be different across iommus */
static void domain_update_iommu_cap(struct dmar_domain *domain)
{
domain_update_iommu_coherency(domain);
domain->iommu_snooping = domain_update_iommu_snooping(NULL);
domain->iommu_superpage = domain_update_iommu_superpage(domain, NULL);
/*
* If RHSA is missing, we should default to the device numa domain
* as fall back.
*/
if (domain->nid == NUMA_NO_NODE)
domain->nid = domain_update_device_node(domain);
/*
* First-level translation restricts the input-address to a
* canonical address (i.e., address bits 63:N have the same
* value as address bit [N-1], where N is 48-bits with 4-level
* paging and 57-bits with 5-level paging). Hence, skip bit
* [N-1].
*/
if (domain_use_first_level(domain))
domain->domain.geometry.aperture_end = __DOMAIN_MAX_ADDR(domain->gaw - 1);
else
domain->domain.geometry.aperture_end = __DOMAIN_MAX_ADDR(domain->gaw);
domain_update_iotlb(domain);
}
struct context_entry *iommu_context_addr(struct intel_iommu *iommu, u8 bus,
u8 devfn, int alloc)
{
struct root_entry *root = &iommu->root_entry[bus];
struct context_entry *context;
u64 *entry;
entry = &root->lo;
if (sm_supported(iommu)) {
if (devfn >= 0x80) {
devfn -= 0x80;
entry = &root->hi;
}
devfn *= 2;
}
if (*entry & 1)
context = phys_to_virt(*entry & VTD_PAGE_MASK);
else {
unsigned long phy_addr;
if (!alloc)
return NULL;
context = alloc_pgtable_page(iommu->node);
if (!context)
return NULL;
__iommu_flush_cache(iommu, (void *)context, CONTEXT_SIZE);
phy_addr = virt_to_phys((void *)context);
*entry = phy_addr | 1;
__iommu_flush_cache(iommu, entry, sizeof(*entry));
}
return &context[devfn];
}
static bool attach_deferred(struct device *dev)
{
return dev_iommu_priv_get(dev) == DEFER_DEVICE_DOMAIN_INFO;
}
/**
* is_downstream_to_pci_bridge - test if a device belongs to the PCI
* sub-hierarchy of a candidate PCI-PCI bridge
* @dev: candidate PCI device belonging to @bridge PCI sub-hierarchy
* @bridge: the candidate PCI-PCI bridge
*
* Return: true if @dev belongs to @bridge PCI sub-hierarchy, else false.
*/
static bool
is_downstream_to_pci_bridge(struct device *dev, struct device *bridge)
{
struct pci_dev *pdev, *pbridge;
if (!dev_is_pci(dev) || !dev_is_pci(bridge))
return false;
pdev = to_pci_dev(dev);
pbridge = to_pci_dev(bridge);
if (pbridge->subordinate &&
pbridge->subordinate->number <= pdev->bus->number &&
pbridge->subordinate->busn_res.end >= pdev->bus->number)
return true;
return false;
}
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
static bool quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
{
struct dmar_drhd_unit *drhd;
u32 vtbar;
int rc;
/* We know that this device on this chipset has its own IOMMU.
* If we find it under a different IOMMU, then the BIOS is lying
* to us. Hope that the IOMMU for this device is actually
* disabled, and it needs no translation...
*/
rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar);
if (rc) {
/* "can't" happen */
dev_info(&pdev->dev, "failed to run vt-d quirk\n");
return false;
}
vtbar &= 0xffff0000;
/* we know that the this iommu should be at offset 0xa000 from vtbar */
drhd = dmar_find_matched_drhd_unit(pdev);
if (!drhd || drhd->reg_base_addr - vtbar != 0xa000) {
pr_warn_once(FW_BUG "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n");
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
return true;
}
return false;
}
static bool iommu_is_dummy(struct intel_iommu *iommu, struct device *dev)
{
if (!iommu || iommu->drhd->ignored)
return true;
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_IOAT_SNB &&
quirk_ioat_snb_local_iommu(pdev))
return true;
}
return false;
}
struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
{
struct dmar_drhd_unit *drhd = NULL;
struct pci_dev *pdev = NULL;
struct intel_iommu *iommu;
struct device *tmp;
u16 segment = 0;
int i;
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
if (!dev)
return NULL;
if (dev_is_pci(dev)) {
struct pci_dev *pf_pdev;
pdev = pci_real_dma_dev(to_pci_dev(dev));
/* VFs aren't listed in scope tables; we need to look up
* the PF instead to find the IOMMU. */
pf_pdev = pci_physfn(pdev);
dev = &pf_pdev->dev;
segment = pci_domain_nr(pdev->bus);
} else if (has_acpi_companion(dev))
dev = &ACPI_COMPANION(dev)->dev;
rcu_read_lock();
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
for_each_iommu(iommu, drhd) {
if (pdev && segment != drhd->segment)
continue;
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, tmp) {
if (tmp == dev) {
/* For a VF use its original BDF# not that of the PF
* which we used for the IOMMU lookup. Strictly speaking
* we could do this for all PCI devices; we only need to
* get the BDF# from the scope table for ACPI matches. */
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu The function device_to_iommu() in the Intel VT-d driver lacks a NULL-ptr check, resulting in this oops at boot on some platforms: BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 PGD 0 [...] Call Trace: ? find_or_alloc_domain.constprop.29+0x1a/0x300 ? dw_dma_probe+0x561/0x580 [dw_dmac_core] ? __get_valid_domain_for_dev+0x39/0x120 ? __intel_map_single+0x138/0x180 ? intel_alloc_coherent+0xb6/0x120 ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm] ? mutex_lock+0x9/0x30 ? kernfs_add_one+0xdb/0x130 ? devres_add+0x19/0x60 ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm] ? platform_drv_probe+0x30/0x90 ? driver_probe_device+0x1ed/0x2b0 ? __driver_attach+0x8f/0xa0 ? driver_probe_device+0x2b0/0x2b0 ? bus_for_each_dev+0x55/0x90 ? bus_add_driver+0x110/0x210 ? 0xffffffffa11ea000 ? driver_register+0x52/0xc0 ? 0xffffffffa11ea000 ? do_one_initcall+0x32/0x130 ? free_vmap_area_noflush+0x37/0x70 ? kmem_cache_alloc+0x88/0xd0 ? do_init_module+0x51/0x1c4 ? load_module+0x1ee9/0x2430 ? show_taint+0x20/0x20 ? kernel_read_file+0xfd/0x190 ? SyS_finit_module+0xa3/0xb0 ? do_syscall_64+0x4a/0xb0 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49 RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 RSP <ffffc90001457a78> CR2: 00000000000007ab ---[ end trace 16f974b6d58d0aad ]--- Add the missing pointer check. Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions") Signed-off-by: Koos Vriezen <koos.vriezen@gmail.com> Cc: stable@vger.kernel.org # 4.8.15+ Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-02 04:02:50 +08:00
if (pdev && pdev->is_virtfn)
goto got_pdev;
if (bus && devfn) {
*bus = drhd->devices[i].bus;
*devfn = drhd->devices[i].devfn;
}
goto out;
}
if (is_downstream_to_pci_bridge(dev, tmp))
goto got_pdev;
}
if (pdev && drhd->include_all) {
got_pdev:
if (bus && devfn) {
*bus = pdev->bus->number;
*devfn = pdev->devfn;
}
goto out;
}
}
iommu = NULL;
out:
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
if (iommu_is_dummy(iommu, dev))
iommu = NULL;
rcu_read_unlock();
return iommu;
}
static void domain_flush_cache(struct dmar_domain *domain,
void *addr, int size)
{
if (!domain->iommu_coherency)
clflush_cache_range(addr, size);
}
static int device_context_mapped(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
struct context_entry *context;
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&iommu->lock, flags);
context = iommu_context_addr(iommu, bus, devfn, 0);
if (context)
ret = context_present(context);
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
}
static void free_context_table(struct intel_iommu *iommu)
{
int i;
unsigned long flags;
struct context_entry *context;
spin_lock_irqsave(&iommu->lock, flags);
if (!iommu->root_entry) {
goto out;
}
for (i = 0; i < ROOT_ENTRY_NR; i++) {
context = iommu_context_addr(iommu, i, 0, 0);
if (context)
free_pgtable_page(context);
if (!sm_supported(iommu))
continue;
context = iommu_context_addr(iommu, i, 0x80, 0);
if (context)
free_pgtable_page(context);
}
free_pgtable_page(iommu->root_entry);
iommu->root_entry = NULL;
out:
spin_unlock_irqrestore(&iommu->lock, flags);
}
static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
unsigned long pfn, int *target_level)
{
struct dma_pte *parent, *pte;
int level = agaw_to_level(domain->agaw);
int offset;
BUG_ON(!domain->pgd);
if (!domain_pfn_supported(domain, pfn))
/* Address beyond IOMMU's addressing capabilities. */
return NULL;
parent = domain->pgd;
while (1) {
void *tmp_page;
offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
if (!*target_level && (dma_pte_superpage(pte) || !dma_pte_present(pte)))
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
break;
if (level == *target_level)
break;
if (!dma_pte_present(pte)) {
uint64_t pteval;
tmp_page = alloc_pgtable_page(domain->nid);
if (!tmp_page)
return NULL;
domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
if (domain_use_first_level(domain)) {
pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
if (domain->domain.type == IOMMU_DOMAIN_DMA)
pteval |= DMA_FL_PTE_ACCESS;
}
if (cmpxchg64(&pte->val, 0ULL, pteval))
/* Someone else set it while we were thinking; use theirs. */
free_pgtable_page(tmp_page);
else
domain_flush_cache(domain, pte, sizeof(*pte));
}
if (level == 1)
break;
parent = phys_to_virt(dma_pte_addr(pte));
level--;
}
if (!*target_level)
*target_level = level;
return pte;
}
/* return address's pte at specific level */
static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
unsigned long pfn,
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
int level, int *large_page)
{
struct dma_pte *parent, *pte;
int total = agaw_to_level(domain->agaw);
int offset;
parent = domain->pgd;
while (level <= total) {
offset = pfn_level_offset(pfn, total);
pte = &parent[offset];
if (level == total)
return pte;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!dma_pte_present(pte)) {
*large_page = total;
break;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
if (dma_pte_superpage(pte)) {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
*large_page = total;
return pte;
}
parent = phys_to_virt(dma_pte_addr(pte));
total--;
}
return NULL;
}
/* clear last level pte, a tlb flush should be followed */
static void dma_pte_clear_range(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
unsigned int large_page;
struct dma_pte *first_pte, *pte;
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
/* we don't need lock here; nobody else touches the iova range */
do {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
large_page = 1;
first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1, &large_page);
if (!pte) {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
start_pfn = align_to_level(start_pfn + 1, large_page + 1);
continue;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
do {
dma_clear_pte(pte);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
start_pfn += lvl_to_nr_pages(large_page);
pte++;
} while (start_pfn <= last_pfn && !first_pte_in_page(pte));
domain_flush_cache(domain, first_pte,
(void *)pte - (void *)first_pte);
} while (start_pfn && start_pfn <= last_pfn);
}
static void dma_pte_free_level(struct dmar_domain *domain, int level,
int retain_level, struct dma_pte *pte,
unsigned long pfn, unsigned long start_pfn,
unsigned long last_pfn)
{
pfn = max(start_pfn, pfn);
pte = &pte[pfn_level_offset(pfn, level)];
do {
unsigned long level_pfn;
struct dma_pte *level_pte;
if (!dma_pte_present(pte) || dma_pte_superpage(pte))
goto next;
iommu/vt-d: Don't over-free page table directories dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0bd668 ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by: Benjamin Serebrin <serebrin@google.com> Signed-off-by: David Dillow <dillow@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-31 11:11:11 +08:00
level_pfn = pfn & level_mask(level);
level_pte = phys_to_virt(dma_pte_addr(pte));
if (level > 2) {
dma_pte_free_level(domain, level - 1, retain_level,
level_pte, level_pfn, start_pfn,
last_pfn);
}
/*
* Free the page table if we're below the level we want to
* retain and the range covers the entire table.
*/
if (level < retain_level && !(start_pfn > level_pfn ||
last_pfn < level_pfn + level_size(level) - 1)) {
dma_clear_pte(pte);
domain_flush_cache(domain, pte, sizeof(*pte));
free_pgtable_page(level_pte);
}
next:
pfn += level_size(level);
} while (!first_pte_in_page(++pte) && pfn <= last_pfn);
}
/*
* clear last level (leaf) ptes and free page table pages below the
* level we wish to keep intact.
*/
static void dma_pte_free_pagetable(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn,
int retain_level)
{
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
dma_pte_clear_range(domain, start_pfn, last_pfn);
/* We don't need lock here; nobody else touches the iova range */
dma_pte_free_level(domain, agaw_to_level(domain->agaw), retain_level,
domain->pgd, 0, start_pfn, last_pfn);
/* free pgd */
if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
free_pgtable_page(domain->pgd);
domain->pgd = NULL;
}
}
/* When a page at a given level is being unlinked from its parent, we don't
need to *modify* it at all. All we need to do is make a list of all the
pages which can be freed just as soon as we've flushed the IOTLB and we
know the hardware page-walk will no longer touch them.
The 'pte' argument is the *parent* PTE, pointing to the page that is to
be freed. */
static struct page *dma_pte_list_pagetables(struct dmar_domain *domain,
int level, struct dma_pte *pte,
struct page *freelist)
{
struct page *pg;
pg = pfn_to_page(dma_pte_addr(pte) >> PAGE_SHIFT);
pg->freelist = freelist;
freelist = pg;
if (level == 1)
return freelist;
pte = page_address(pg);
do {
if (dma_pte_present(pte) && !dma_pte_superpage(pte))
freelist = dma_pte_list_pagetables(domain, level - 1,
pte, freelist);
pte++;
} while (!first_pte_in_page(pte));
return freelist;
}
static struct page *dma_pte_clear_level(struct dmar_domain *domain, int level,
struct dma_pte *pte, unsigned long pfn,
unsigned long start_pfn,
unsigned long last_pfn,
struct page *freelist)
{
struct dma_pte *first_pte = NULL, *last_pte = NULL;
pfn = max(start_pfn, pfn);
pte = &pte[pfn_level_offset(pfn, level)];
do {
unsigned long level_pfn;
if (!dma_pte_present(pte))
goto next;
level_pfn = pfn & level_mask(level);
/* If range covers entire pagetable, free it */
if (start_pfn <= level_pfn &&
last_pfn >= level_pfn + level_size(level) - 1) {
/* These suborbinate page tables are going away entirely. Don't
bother to clear them; we're just going to *free* them. */
if (level > 1 && !dma_pte_superpage(pte))
freelist = dma_pte_list_pagetables(domain, level - 1, pte, freelist);
dma_clear_pte(pte);
if (!first_pte)
first_pte = pte;
last_pte = pte;
} else if (level > 1) {
/* Recurse down into a level that isn't *entirely* obsolete */
freelist = dma_pte_clear_level(domain, level - 1,
phys_to_virt(dma_pte_addr(pte)),
level_pfn, start_pfn, last_pfn,
freelist);
}
next:
pfn += level_size(level);
} while (!first_pte_in_page(++pte) && pfn <= last_pfn);
if (first_pte)
domain_flush_cache(domain, first_pte,
(void *)++last_pte - (void *)first_pte);
return freelist;
}
/* We can't just free the pages because the IOMMU may still be walking
the page tables, and may have cached the intermediate levels. The
pages can only be freed after the IOTLB flush has been done. */
static struct page *domain_unmap(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn,
struct page *freelist)
{
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
/* we don't need lock here; nobody else touches the iova range */
freelist = dma_pte_clear_level(domain, agaw_to_level(domain->agaw),
domain->pgd, 0, start_pfn, last_pfn,
freelist);
/* free pgd */
if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
struct page *pgd_page = virt_to_page(domain->pgd);
pgd_page->freelist = freelist;
freelist = pgd_page;
domain->pgd = NULL;
}
return freelist;
}
static void dma_free_pagelist(struct page *freelist)
{
struct page *pg;
while ((pg = freelist)) {
freelist = pg->freelist;
free_pgtable_page(page_address(pg));
}
}
/* iommu handling */
static int iommu_alloc_root_entry(struct intel_iommu *iommu)
{
struct root_entry *root;
unsigned long flags;
root = (struct root_entry *)alloc_pgtable_page(iommu->node);
if (!root) {
pr_err("Allocating root entry for %s failed\n",
iommu->name);
return -ENOMEM;
}
__iommu_flush_cache(iommu, root, ROOT_SIZE);
spin_lock_irqsave(&iommu->lock, flags);
iommu->root_entry = root;
spin_unlock_irqrestore(&iommu->lock, flags);
return 0;
}
static void iommu_set_root_entry(struct intel_iommu *iommu)
{
u64 addr;
u32 sts;
unsigned long flag;
addr = virt_to_phys(iommu->root_entry);
if (sm_supported(iommu))
addr |= DMA_RTADDR_SMT;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
dmar_writeq(iommu->reg + DMAR_RTADDR_REG, addr);
writel(iommu->gcmd | DMA_GCMD_SRTP, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_RTPS), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
void iommu_flush_write_buffer(struct intel_iommu *iommu)
{
u32 val;
unsigned long flag;
if (!rwbf_quirk && !cap_rwbf(iommu->cap))
return;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
writel(iommu->gcmd | DMA_GCMD_WBF, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (!(val & DMA_GSTS_WBFS)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
/* return value determine if we need a write buffer flush */
static void __iommu_flush_context(struct intel_iommu *iommu,
u16 did, u16 source_id, u8 function_mask,
u64 type)
{
u64 val = 0;
unsigned long flag;
switch (type) {
case DMA_CCMD_GLOBAL_INVL:
val = DMA_CCMD_GLOBAL_INVL;
break;
case DMA_CCMD_DOMAIN_INVL:
val = DMA_CCMD_DOMAIN_INVL|DMA_CCMD_DID(did);
break;
case DMA_CCMD_DEVICE_INVL:
val = DMA_CCMD_DEVICE_INVL|DMA_CCMD_DID(did)
| DMA_CCMD_SID(source_id) | DMA_CCMD_FM(function_mask);
break;
default:
BUG();
}
val |= DMA_CCMD_ICC;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
dmar_writeq(iommu->reg + DMAR_CCMD_REG, val);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_CCMD_REG,
dmar_readq, (!(val & DMA_CCMD_ICC)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
/* return value determine if we need a write buffer flush */
static void __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
u64 addr, unsigned int size_order, u64 type)
{
int tlb_offset = ecap_iotlb_offset(iommu->ecap);
u64 val = 0, val_iva = 0;
unsigned long flag;
switch (type) {
case DMA_TLB_GLOBAL_FLUSH:
/* global flush doesn't need set IVA_REG */
val = DMA_TLB_GLOBAL_FLUSH|DMA_TLB_IVT;
break;
case DMA_TLB_DSI_FLUSH:
val = DMA_TLB_DSI_FLUSH|DMA_TLB_IVT|DMA_TLB_DID(did);
break;
case DMA_TLB_PSI_FLUSH:
val = DMA_TLB_PSI_FLUSH|DMA_TLB_IVT|DMA_TLB_DID(did);
/* IH bit is passed in as part of address */
val_iva = size_order | addr;
break;
default:
BUG();
}
/* Note: set drain read/write */
#if 0
/*
* This is probably to be super secure.. Looks like we can
* ignore it without any impact.
*/
if (cap_read_drain(iommu->cap))
val |= DMA_TLB_READ_DRAIN;
#endif
if (cap_write_drain(iommu->cap))
val |= DMA_TLB_WRITE_DRAIN;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
/* Note: Only uses first TLB reg currently */
if (val_iva)
dmar_writeq(iommu->reg + tlb_offset, val_iva);
dmar_writeq(iommu->reg + tlb_offset + 8, val);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, tlb_offset + 8,
dmar_readq, (!(val & DMA_TLB_IVT)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
/* check IOTLB invalidation granularity */
if (DMA_TLB_IAIG(val) == 0)
pr_err("Flush IOTLB failed\n");
if (DMA_TLB_IAIG(val) != DMA_TLB_IIRG(type))
pr_debug("TLB flush request %Lx, actual %Lx\n",
(unsigned long long)DMA_TLB_IIRG(type),
(unsigned long long)DMA_TLB_IAIG(val));
}
static struct device_domain_info *
iommu_support_dev_iotlb (struct dmar_domain *domain, struct intel_iommu *iommu,
u8 bus, u8 devfn)
{
struct device_domain_info *info;
assert_spin_locked(&device_domain_lock);
if (!iommu->qi)
return NULL;
list_for_each_entry(info, &domain->devices, link)
if (info->iommu == iommu && info->bus == bus &&
info->devfn == devfn) {
if (info->ats_supported && info->dev)
return info;
break;
}
return NULL;
}
static void domain_update_iotlb(struct dmar_domain *domain)
{
struct device_domain_info *info;
bool has_iotlb_device = false;
assert_spin_locked(&device_domain_lock);
list_for_each_entry(info, &domain->devices, link)
if (info->ats_enabled) {
has_iotlb_device = true;
break;
}
if (!has_iotlb_device) {
struct subdev_domain_info *sinfo;
list_for_each_entry(sinfo, &domain->subdevices, link_domain) {
info = get_domain_info(sinfo->pdev);
if (info && info->ats_enabled) {
has_iotlb_device = true;
break;
}
}
}
domain->has_iotlb_device = has_iotlb_device;
}
static void iommu_enable_dev_iotlb(struct device_domain_info *info)
{
struct pci_dev *pdev;
assert_spin_locked(&device_domain_lock);
if (!info || !dev_is_pci(info->dev))
return;
pdev = to_pci_dev(info->dev);
/* For IOMMU that supports device IOTLB throttling (DIT), we assign
* PFSID to the invalidation desc of a VF such that IOMMU HW can gauge
* queue depth at PF level. If DIT is not set, PFSID will be treated as
* reserved, which should be set to 0.
*/
if (!ecap_dit(info->iommu->ecap))
info->pfsid = 0;
else {
struct pci_dev *pf_pdev;
/* pdev will be returned if device is not a vf */
pf_pdev = pci_physfn(pdev);
info->pfsid = pci_dev_id(pf_pdev);
}
#ifdef CONFIG_INTEL_IOMMU_SVM
/* The PCIe spec, in its wisdom, declares that the behaviour of
the device if you enable PASID support after ATS support is
undefined. So always enable PASID support on devices which
have it, even if we can't yet know if we're ever going to
use it. */
if (info->pasid_supported && !pci_enable_pasid(pdev, info->pasid_supported & ~1))
info->pasid_enabled = 1;
if (info->pri_supported &&
(info->pasid_enabled ? pci_prg_resp_pasid_required(pdev) : 1) &&
!pci_reset_pri(pdev) && !pci_enable_pri(pdev, 32))
info->pri_enabled = 1;
#endif
if (info->ats_supported && pci_ats_page_aligned(pdev) &&
!pci_enable_ats(pdev, VTD_PAGE_SHIFT)) {
info->ats_enabled = 1;
domain_update_iotlb(info->domain);
info->ats_qdep = pci_ats_queue_depth(pdev);
}
}
static void iommu_disable_dev_iotlb(struct device_domain_info *info)
{
struct pci_dev *pdev;
assert_spin_locked(&device_domain_lock);
if (!dev_is_pci(info->dev))
return;
pdev = to_pci_dev(info->dev);
if (info->ats_enabled) {
pci_disable_ats(pdev);
info->ats_enabled = 0;
domain_update_iotlb(info->domain);
}
#ifdef CONFIG_INTEL_IOMMU_SVM
if (info->pri_enabled) {
pci_disable_pri(pdev);
info->pri_enabled = 0;
}
if (info->pasid_enabled) {
pci_disable_pasid(pdev);
info->pasid_enabled = 0;
}
#endif
}
static void __iommu_flush_dev_iotlb(struct device_domain_info *info,
u64 addr, unsigned int mask)
{
u16 sid, qdep;
if (!info || !info->ats_enabled)
return;
sid = info->bus << 8 | info->devfn;
qdep = info->ats_qdep;
qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
qdep, addr, mask);
}
static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
u64 addr, unsigned mask)
{
unsigned long flags;
struct device_domain_info *info;
struct subdev_domain_info *sinfo;
if (!domain->has_iotlb_device)
return;
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry(info, &domain->devices, link)
__iommu_flush_dev_iotlb(info, addr, mask);
list_for_each_entry(sinfo, &domain->subdevices, link_domain) {
info = get_domain_info(sinfo->pdev);
__iommu_flush_dev_iotlb(info, addr, mask);
}
spin_unlock_irqrestore(&device_domain_lock, flags);
}
static void domain_flush_piotlb(struct intel_iommu *iommu,
struct dmar_domain *domain,
u64 addr, unsigned long npages, bool ih)
{
u16 did = domain->iommu_did[iommu->seq_id];
if (domain->default_pasid)
qi_flush_piotlb(iommu, did, domain->default_pasid,
addr, npages, ih);
if (!list_empty(&domain->devices))
qi_flush_piotlb(iommu, did, PASID_RID2PASID, addr, npages, ih);
}
static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
struct dmar_domain *domain,
unsigned long pfn, unsigned int pages,
int ih, int map)
{
unsigned int mask = ilog2(__roundup_pow_of_two(pages));
uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
u16 did = domain->iommu_did[iommu->seq_id];
BUG_ON(pages == 0);
if (ih)
ih = 1 << 6;
if (domain_use_first_level(domain)) {
domain_flush_piotlb(iommu, domain, addr, pages, ih);
} else {
/*
* Fallback to domain selective flush if no PSI support or
* the size is too big. PSI requires page size to be 2 ^ x,
* and the base address is naturally aligned to the size.
*/
if (!cap_pgsel_inv(iommu->cap) ||
mask > cap_max_amask_val(iommu->cap))
iommu->flush.flush_iotlb(iommu, did, 0, 0,
DMA_TLB_DSI_FLUSH);
else
iommu->flush.flush_iotlb(iommu, did, addr | ih, mask,
DMA_TLB_PSI_FLUSH);
}
/*
* In caching mode, changes of pages from non-present to present require
* flush. However, device IOTLB doesn't need to be flushed in this case.
*/
if (!cap_caching_mode(iommu->cap) || !map)
iommu/vt-d: Use domain instead of cache fetching after commit a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter to iommu_flush_iotlb_psi(), so no need to fetch it from cache again. More importantly, a NULL reference pointer bug is reported on RHEL7 (and it can be reproduced on some old upstream kernels too, e.g., v4.13) by unplugging an 40g nic from a VM (hard to test unplug on real host, but it should be the same): https://bugzilla.redhat.com/show_bug.cgi?id=1531367 [ 24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed [ 24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press [ 29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK [ 29.783557] iommu: Removing device 0000:01:00.0 from group 3 [ 29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304 [ 29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120 [ 29.786486] PGD 0 [ 29.786487] P4D 0 [ 29.786812] [ 29.787390] Oops: 0000 [#1] SMP [ 29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng [ 29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14 [ 29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014 [ 29.797593] Workqueue: pciehp-0 pciehp_power_thread [ 29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000 [ 29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120 [ 29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086 [ 29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025 [ 29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000 [ 29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0 [ 29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400 [ 29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000 [ 29.805792] FS: 0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000 [ 29.806923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0 [ 29.808747] Call Trace: [ 29.809156] flush_unmaps_timeout+0x126/0x1c0 [ 29.809800] domain_exit+0xd6/0x100 [ 29.810322] device_notifier+0x6b/0x70 [ 29.810902] notifier_call_chain+0x4a/0x70 [ 29.812822] __blocking_notifier_call_chain+0x47/0x60 [ 29.814499] blocking_notifier_call_chain+0x16/0x20 [ 29.816137] device_del+0x233/0x320 [ 29.817588] pci_remove_bus_device+0x6f/0x110 [ 29.819133] pci_stop_and_remove_bus_device+0x1a/0x20 [ 29.820817] pciehp_unconfigure_device+0x7a/0x1d0 [ 29.822434] pciehp_disable_slot+0x52/0xe0 [ 29.823931] pciehp_power_thread+0x8a/0xa0 [ 29.825411] process_one_work+0x18c/0x3a0 [ 29.826875] worker_thread+0x4e/0x3b0 [ 29.828263] kthread+0x109/0x140 [ 29.829564] ? process_one_work+0x3a0/0x3a0 [ 29.831081] ? kthread_park+0x60/0x60 [ 29.832464] ret_from_fork+0x25/0x30 [ 29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf [ 29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0 [ 29.840362] CR2: 0000000000000304 [ 29.841716] ---[ end trace b10ec0d6900868d3 ]--- This patch fixes that problem if applied to v4.13 kernel. The bug does not exist on latest upstream kernel since it's fixed as a side effect of commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing", 2017-08-15). But IMHO it's still good to have this patch upstream. CC: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Fixes: a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi") Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-10 13:51:37 +08:00
iommu_flush_dev_iotlb(domain, addr, mask);
}
/* Notification for newly created mappings */
static inline void __mapping_notify_one(struct intel_iommu *iommu,
struct dmar_domain *domain,
unsigned long pfn, unsigned int pages)
{
/*
* It's a non-present to present mapping. Only flush if caching mode
* and second level.
*/
if (cap_caching_mode(iommu->cap) && !domain_use_first_level(domain))
iommu_flush_iotlb_psi(iommu, domain, pfn, pages, 0, 1);
else
iommu_flush_write_buffer(iommu);
}
static void intel_flush_iotlb_all(struct iommu_domain *domain)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
int idx;
for_each_domain_iommu(idx, dmar_domain) {
struct intel_iommu *iommu = g_iommus[idx];
u16 did = dmar_domain->iommu_did[iommu->seq_id];
if (domain_use_first_level(dmar_domain))
domain_flush_piotlb(iommu, dmar_domain, 0, -1, 0);
else
iommu->flush.flush_iotlb(iommu, did, 0, 0,
DMA_TLB_DSI_FLUSH);
if (!cap_caching_mode(iommu->cap))
iommu_flush_dev_iotlb(get_iommu_domain(iommu, did),
0, MAX_AGAW_PFN_WIDTH);
}
}
static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)
{
u32 pmen;
unsigned long flags;
if (!cap_plmr(iommu->cap) && !cap_phmr(iommu->cap))
return;
raw_spin_lock_irqsave(&iommu->register_lock, flags);
pmen = readl(iommu->reg + DMAR_PMEN_REG);
pmen &= ~DMA_PMEN_EPM;
writel(pmen, iommu->reg + DMAR_PMEN_REG);
/* wait for the protected region status bit to clear */
IOMMU_WAIT_OP(iommu, DMAR_PMEN_REG,
readl, !(pmen & DMA_PMEN_PRS), pmen);
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
static void iommu_enable_translation(struct intel_iommu *iommu)
{
u32 sts;
unsigned long flags;
raw_spin_lock_irqsave(&iommu->register_lock, flags);
iommu->gcmd |= DMA_GCMD_TE;
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_TES), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
static void iommu_disable_translation(struct intel_iommu *iommu)
{
u32 sts;
unsigned long flag;
if (iommu_skip_te_disable && iommu->drhd->gfx_dedicated &&
(cap_read_drain(iommu->cap) || cap_write_drain(iommu->cap)))
return;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
iommu->gcmd &= ~DMA_GCMD_TE;
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (!(sts & DMA_GSTS_TES)), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
static int iommu_init_domains(struct intel_iommu *iommu)
{
u32 ndomains, nlongs;
size_t size;
ndomains = cap_ndoms(iommu->cap);
pr_debug("%s: Number of Domains supported <%d>\n",
iommu->name, ndomains);
nlongs = BITS_TO_LONGS(ndomains);
spin_lock_init(&iommu->lock);
iommu->domain_ids = kcalloc(nlongs, sizeof(unsigned long), GFP_KERNEL);
if (!iommu->domain_ids) {
pr_err("%s: Allocating domain id array failed\n",
iommu->name);
return -ENOMEM;
}
size = (ALIGN(ndomains, 256) >> 8) * sizeof(struct dmar_domain **);
iommu->domains = kzalloc(size, GFP_KERNEL);
if (iommu->domains) {
size = 256 * sizeof(struct dmar_domain *);
iommu->domains[0] = kzalloc(size, GFP_KERNEL);
}
if (!iommu->domains || !iommu->domains[0]) {
pr_err("%s: Allocating domain array failed\n",
iommu->name);
kfree(iommu->domain_ids);
kfree(iommu->domains);
iommu->domain_ids = NULL;
iommu->domains = NULL;
return -ENOMEM;
}
/*
* If Caching mode is set, then invalid translations are tagged
* with domain-id 0, hence we need to pre-allocate it. We also
* use domain-id 0 as a marker for non-allocated domain-id, so
* make sure it is not used for a real domain.
*/
set_bit(0, iommu->domain_ids);
/*
* Vt-d spec rev3.0 (section 6.2.3.1) requires that each pasid
* entry for first-level or pass-through translation modes should
* be programmed with a domain id different from those used for
* second-level or nested translation. We reserve a domain id for
* this purpose.
*/
if (sm_supported(iommu))
set_bit(FLPT_DEFAULT_DID, iommu->domain_ids);
return 0;
}
static void disable_dmar_iommu(struct intel_iommu *iommu)
{
struct device_domain_info *info, *tmp;
unsigned long flags;
if (!iommu->domains || !iommu->domain_ids)
return;
iommu/vt-d: Check for NULL pointer when freeing IOMMU data structure Domain id 0 will be assigned to invalid translation without allocating domain data structure if DMAR unit supports caching mode. So in function free_dmar_iommu(), we should check whether the domain pointer is NULL, otherwise it will cause system crash as below: [ 6.790519] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 [ 6.799520] IP: [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 6.806493] PGD 0 [ 6.817972] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.823303] Modules linked in: [ 6.826862] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #126 [ 6.834252] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.845951] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.854437] RIP: 0010:[<ffffffff810e2dc8>] [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 6.864154] RSP: 0000:ffff880455a89ce0 EFLAGS: 00010046 [ 6.870179] RAX: 0000000000000046 RBX: 0000000000000002 RCX: 0000000000000000 [ 6.878249] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000000c8 [ 6.886318] RBP: ffff880455a89d40 R08: 0000000000000002 R09: 0000000000000001 [ 6.894387] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880455a80000 [ 6.902458] R13: 0000000000000000 R14: 00000000000000c8 R15: 0000000000000000 [ 6.910520] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.919687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.926198] CR2: 00000000000000c8 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.934269] Stack: [ 6.936588] ffffffffffffff10 ffffffff810f59db 0000000000000010 0000000000000246 [ 6.945219] ffff880455a89d10 0000000000000000 ffffffff82bcb980 0000000000000046 [ 6.953850] 0000000000000000 0000000000000000 0000000000000002 0000000000000000 [ 6.962482] Call Trace: [ 6.965300] [<ffffffff810f59db>] ? vprintk_emit+0x4fb/0x5a0 [ 6.971716] [<ffffffff810e3185>] lock_acquire+0x185/0x200 [ 6.977941] [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d [ 6.984167] [<ffffffff81870b06>] _raw_spin_lock_irqsave+0x56/0x90 [ 6.991158] [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d [ 6.997380] [<ffffffff821fbbee>] init_dmars+0x839/0xa1d [ 7.003410] [<ffffffff8147d575>] ? pci_get_dev_by_id+0x75/0xd0 [ 7.010119] [<ffffffff821fc146>] intel_iommu_init+0x2f0/0x502 [ 7.016735] [<ffffffff821a7947>] ? iommu_setup+0x27d/0x27d [ 7.023056] [<ffffffff821a796f>] pci_iommu_init+0x28/0x52 [ 7.029282] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.035702] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.041919] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.048919] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.055336] [<ffffffff8184d3f0>] ? rest_init+0x150/0x150 [ 7.061461] [<ffffffff8184d3fe>] kernel_init+0xe/0x100 [ 7.067393] [<ffffffff8187b5fc>] ret_from_fork+0x7c/0xb0 [ 7.073518] [<ffffffff8184d3f0>] ? rest_init+0x150/0x150 [ 7.079642] Code: 01 76 18 89 05 46 04 36 01 41 be 01 00 00 00 e9 2f 02 00 00 0f 1f 80 00 00 00 00 41 be 01 00 00 00 e9 1d 02 00 00 0f 1f 44 00 00 <49> 81 3e c0 31 34 82 b8 01 00 00 00 0f 44 d8 41 83 ff 01 0f 87 [ 7.104944] RIP [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 7.112008] RSP <ffff880455a89ce0> [ 7.115988] CR2: 00000000000000c8 [ 7.119784] ---[ end trace 13d756f0f462c538 ]--- [ 7.125034] note: swapper/0[1] exited with preempt_count 1 [ 7.131285] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 7.131285] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:30 +08:00
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry_safe(info, tmp, &device_domain_list, global) {
if (info->iommu != iommu)
continue;
if (!info->dev || !info->domain)
continue;
__dmar_remove_one_dev_info(info);
}
spin_unlock_irqrestore(&device_domain_lock, flags);
if (iommu->gcmd & DMA_GCMD_TE)
iommu_disable_translation(iommu);
}
static void free_dmar_iommu(struct intel_iommu *iommu)
{
if ((iommu->domains) && (iommu->domain_ids)) {
int elems = ALIGN(cap_ndoms(iommu->cap), 256) >> 8;
int i;
for (i = 0; i < elems; i++)
kfree(iommu->domains[i]);
kfree(iommu->domains);
kfree(iommu->domain_ids);
iommu->domains = NULL;
iommu->domain_ids = NULL;
}
g_iommus[iommu->seq_id] = NULL;
/* free context mapping */
free_context_table(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_supported(iommu)) {
if (ecap_prs(iommu->ecap))
intel_svm_finish_prq(iommu);
}
if (vccap_pasid(iommu->vccap))
ioasid_unregister_allocator(&iommu->pasid_allocator);
#endif
}
/*
* Check and return whether first level is used by default for
* DMA translation.
*/
static bool first_level_by_default(void)
{
return scalable_mode_support() && intel_cap_flts_sanity();
}
static struct dmar_domain *alloc_domain(int flags)
{
struct dmar_domain *domain;
domain = alloc_domain_mem();
if (!domain)
return NULL;
memset(domain, 0, sizeof(*domain));
mm: replace all open encodings for NUMA_NO_NODE Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 07:42:58 +08:00
domain->nid = NUMA_NO_NODE;
domain->flags = flags;
if (first_level_by_default())
domain->flags |= DOMAIN_FLAG_USE_FIRST_LEVEL;
domain->has_iotlb_device = false;
INIT_LIST_HEAD(&domain->devices);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
INIT_LIST_HEAD(&domain->subdevices);
return domain;
}
/* Must be called with iommu->lock */
static int domain_attach_iommu(struct dmar_domain *domain,
struct intel_iommu *iommu)
{
unsigned long ndomains;
int num;
assert_spin_locked(&device_domain_lock);
assert_spin_locked(&iommu->lock);
domain->iommu_refcnt[iommu->seq_id] += 1;
domain->iommu_count += 1;
if (domain->iommu_refcnt[iommu->seq_id] == 1) {
ndomains = cap_ndoms(iommu->cap);
num = find_first_zero_bit(iommu->domain_ids, ndomains);
if (num >= ndomains) {
pr_err("%s: No free domain ids\n", iommu->name);
domain->iommu_refcnt[iommu->seq_id] -= 1;
domain->iommu_count -= 1;
return -ENOSPC;
}
set_bit(num, iommu->domain_ids);
set_iommu_domain(iommu, num, domain);
domain->iommu_did[iommu->seq_id] = num;
domain->nid = iommu->node;
domain_update_iommu_cap(domain);
}
return 0;
}
static int domain_detach_iommu(struct dmar_domain *domain,
struct intel_iommu *iommu)
{
int num, count;
assert_spin_locked(&device_domain_lock);
assert_spin_locked(&iommu->lock);
domain->iommu_refcnt[iommu->seq_id] -= 1;
count = --domain->iommu_count;
if (domain->iommu_refcnt[iommu->seq_id] == 0) {
num = domain->iommu_did[iommu->seq_id];
clear_bit(num, iommu->domain_ids);
set_iommu_domain(iommu, num, NULL);
domain_update_iommu_cap(domain);
domain->iommu_did[iommu->seq_id] = 0;
}
return count;
}
static inline int guestwidth_to_adjustwidth(int gaw)
{
int agaw;
int r = (gaw - 12) % 9;
if (r == 0)
agaw = gaw;
else
agaw = gaw + 9 - r;
if (agaw > 64)
agaw = 64;
return agaw;
}
static void domain_exit(struct dmar_domain *domain)
{
/* Remove associated devices and clear attached or cached domains */
domain_remove_dev_info(domain);
/* destroy iovas */
if (domain->domain.type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&domain->domain);
if (domain->pgd) {
struct page *freelist;
freelist = domain_unmap(domain, 0,
DOMAIN_MAX_PFN(domain->gaw), NULL);
dma_free_pagelist(freelist);
}
free_domain_mem(domain);
}
/*
* Get the PASID directory size for scalable mode context entry.
* Value of X in the PDTS field of a scalable mode context entry
* indicates PASID directory with 2^(X + 7) entries.
*/
static inline unsigned long context_get_sm_pds(struct pasid_table *table)
{
int pds, max_pde;
max_pde = table->max_pasid >> PASID_PDE_SHIFT;
pds = find_first_bit((unsigned long *)&max_pde, MAX_NR_PASID_BITS);
if (pds < 7)
return 0;
return pds - 7;
}
/*
* Set the RID_PASID field of a scalable mode context entry. The
* IOMMU hardware will use the PASID value set in this field for
* DMA translations of DMA requests without PASID.
*/
static inline void
context_set_sm_rid2pasid(struct context_entry *context, unsigned long pasid)
{
context->hi |= pasid & ((1 << 20) - 1);
}
/*
* Set the DTE(Device-TLB Enable) field of a scalable mode context
* entry.
*/
static inline void context_set_sm_dte(struct context_entry *context)
{
context->lo |= (1 << 2);
}
/*
* Set the PRE(Page Request Enable) field of a scalable mode context
* entry.
*/
static inline void context_set_sm_pre(struct context_entry *context)
{
context->lo |= (1 << 4);
}
/* Convert value to context PASID directory size field coding. */
#define context_pdts(pds) (((pds) & 0x7) << 9)
static int domain_context_mapping_one(struct dmar_domain *domain,
struct intel_iommu *iommu,
struct pasid_table *table,
u8 bus, u8 devfn)
{
u16 did = domain->iommu_did[iommu->seq_id];
int translation = CONTEXT_TT_MULTI_LEVEL;
struct device_domain_info *info = NULL;
struct context_entry *context;
unsigned long flags;
int ret;
WARN_ON(did == 0);
if (hw_pass_through && domain_type_is_si(domain))
translation = CONTEXT_TT_PASS_THROUGH;
pr_debug("Set context mapping for %02x:%02x.%d\n",
bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
BUG_ON(!domain->pgd);
spin_lock_irqsave(&device_domain_lock, flags);
spin_lock(&iommu->lock);
ret = -ENOMEM;
context = iommu_context_addr(iommu, bus, devfn, 1);
if (!context)
goto out_unlock;
ret = 0;
if (context_present(context))
goto out_unlock;
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers under kdump, it can be steadily reproduced on several different machines, the dmesg log is like: HP HPSA Driver (v 3.4.16-0) hpsa 0000:02:00.0: using doorbell to reset controller hpsa 0000:02:00.0: board ready after hard reset. hpsa 0000:02:00.0: Waiting for controller to respond to no-op DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff] DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff] DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set hpsa 0000:02:00.0: controller message 03:00 timed out hpsa 0000:02:00.0: no-op failed; re-trying After some debugging, we found that the fault addr is from DMA initiated at the driver probe stage after reset(not in-flight DMA), and the corresponding pte entry value is correct, the fault is likely due to the old iommu caches of the in-flight DMA before it. Thus we need to flush the old cache after context mapping is setup for the device, where the device is supposed to finish reset at its driver probe stage and no in-flight DMA exists hereafter. I'm not sure if the hardware is responsible for invalidating all the related caches allocated in the iommu hardware before, but seems not the case for hpsa, actually many device drivers have problems in properly resetting the hardware. Anyway flushing (again) by software in kdump kernel when the device gets context mapped which is a quite infrequent operation does little harm. With this patch, the problematic machine can survive the kdump tests. CC: Myron Stowe <myron.stowe@gmail.com> CC: Joseph Szczypek <jszczype@redhat.com> CC: Don Brace <don.brace@microsemi.com> CC: Baoquan He <bhe@redhat.com> CC: Dave Young <dyoung@redhat.com> Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel") Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel") Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries") Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-05 20:09:07 +08:00
/*
* For kdump cases, old valid entries may be cached due to the
* in-flight DMA and copied pgtable, but there is no unmapping
* behaviour for them, thus we need an explicit cache flush for
* the newly-mapped device. For kdump, at this point, the device
* is supposed to finish reset at its driver probe stage, so no
* in-flight DMA will exist, and we don't need to worry anymore
* hereafter.
*/
if (context_copied(context)) {
u16 did_old = context_domain_id(context);
if (did_old < cap_ndoms(iommu->cap)) {
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers under kdump, it can be steadily reproduced on several different machines, the dmesg log is like: HP HPSA Driver (v 3.4.16-0) hpsa 0000:02:00.0: using doorbell to reset controller hpsa 0000:02:00.0: board ready after hard reset. hpsa 0000:02:00.0: Waiting for controller to respond to no-op DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff] DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff] DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set hpsa 0000:02:00.0: controller message 03:00 timed out hpsa 0000:02:00.0: no-op failed; re-trying After some debugging, we found that the fault addr is from DMA initiated at the driver probe stage after reset(not in-flight DMA), and the corresponding pte entry value is correct, the fault is likely due to the old iommu caches of the in-flight DMA before it. Thus we need to flush the old cache after context mapping is setup for the device, where the device is supposed to finish reset at its driver probe stage and no in-flight DMA exists hereafter. I'm not sure if the hardware is responsible for invalidating all the related caches allocated in the iommu hardware before, but seems not the case for hpsa, actually many device drivers have problems in properly resetting the hardware. Anyway flushing (again) by software in kdump kernel when the device gets context mapped which is a quite infrequent operation does little harm. With this patch, the problematic machine can survive the kdump tests. CC: Myron Stowe <myron.stowe@gmail.com> CC: Joseph Szczypek <jszczype@redhat.com> CC: Don Brace <don.brace@microsemi.com> CC: Baoquan He <bhe@redhat.com> CC: Dave Young <dyoung@redhat.com> Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel") Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel") Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries") Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-05 20:09:07 +08:00
iommu->flush.flush_context(iommu, did_old,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
iommu->flush.flush_iotlb(iommu, did_old, 0, 0,
DMA_TLB_DSI_FLUSH);
}
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers under kdump, it can be steadily reproduced on several different machines, the dmesg log is like: HP HPSA Driver (v 3.4.16-0) hpsa 0000:02:00.0: using doorbell to reset controller hpsa 0000:02:00.0: board ready after hard reset. hpsa 0000:02:00.0: Waiting for controller to respond to no-op DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff] DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff] DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set hpsa 0000:02:00.0: controller message 03:00 timed out hpsa 0000:02:00.0: no-op failed; re-trying After some debugging, we found that the fault addr is from DMA initiated at the driver probe stage after reset(not in-flight DMA), and the corresponding pte entry value is correct, the fault is likely due to the old iommu caches of the in-flight DMA before it. Thus we need to flush the old cache after context mapping is setup for the device, where the device is supposed to finish reset at its driver probe stage and no in-flight DMA exists hereafter. I'm not sure if the hardware is responsible for invalidating all the related caches allocated in the iommu hardware before, but seems not the case for hpsa, actually many device drivers have problems in properly resetting the hardware. Anyway flushing (again) by software in kdump kernel when the device gets context mapped which is a quite infrequent operation does little harm. With this patch, the problematic machine can survive the kdump tests. CC: Myron Stowe <myron.stowe@gmail.com> CC: Joseph Szczypek <jszczype@redhat.com> CC: Don Brace <don.brace@microsemi.com> CC: Baoquan He <bhe@redhat.com> CC: Dave Young <dyoung@redhat.com> Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel") Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel") Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries") Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-05 20:09:07 +08:00
}
context_clear_entry(context);
if (sm_supported(iommu)) {
unsigned long pds;
WARN_ON(!table);
/* Setup the PASID DIR pointer: */
pds = context_get_sm_pds(table);
context->lo = (u64)virt_to_phys(table->table) |
context_pdts(pds);
/* Setup the RID_PASID field: */
context_set_sm_rid2pasid(context, PASID_RID2PASID);
/*
* Setup the Device-TLB enable bit and Page request
* Enable bit:
*/
info = iommu_support_dev_iotlb(domain, iommu, bus, devfn);
if (info && info->ats_supported)
context_set_sm_dte(context);
if (info && info->pri_supported)
context_set_sm_pre(context);
} else {
struct dma_pte *pgd = domain->pgd;
int agaw;
context_set_domain_id(context, did);
if (translation != CONTEXT_TT_PASS_THROUGH) {
/*
* Skip top levels of page tables for iommu which has
* less agaw than default. Unnecessary for PT mode.
*/
for (agaw = domain->agaw; agaw > iommu->agaw; agaw--) {
ret = -ENOMEM;
pgd = phys_to_virt(dma_pte_addr(pgd));
if (!dma_pte_present(pgd))
goto out_unlock;
}
info = iommu_support_dev_iotlb(domain, iommu, bus, devfn);
if (info && info->ats_supported)
translation = CONTEXT_TT_DEV_IOTLB;
else
translation = CONTEXT_TT_MULTI_LEVEL;
context_set_address_root(context, virt_to_phys(pgd));
context_set_address_width(context, agaw);
} else {
/*
* In pass through mode, AW must be programmed to
* indicate the largest AGAW value supported by
* hardware. And ASR is ignored by hardware.
*/
context_set_address_width(context, iommu->msagaw);
}
context_set_translation_type(context, translation);
}
context_set_fault_enable(context);
context_set_present(context);
if (!ecap_coherent(iommu->ecap))
clflush_cache_range(context, sizeof(*context));
/*
* It's a non-present to present mapping. If hardware doesn't cache
* non-present entry we only need to flush the write-buffer. If the
* _does_ cache non-present entries, then it does so in the special
* domain #0, which we have to flush:
*/
if (cap_caching_mode(iommu->cap)) {
iommu->flush.flush_context(iommu, 0,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
} else {
iommu_flush_write_buffer(iommu);
}
iommu_enable_dev_iotlb(info);
ret = 0;
out_unlock:
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
struct domain_context_mapping_data {
struct dmar_domain *domain;
struct intel_iommu *iommu;
struct pasid_table *table;
};
static int domain_context_mapping_cb(struct pci_dev *pdev,
u16 alias, void *opaque)
{
struct domain_context_mapping_data *data = opaque;
return domain_context_mapping_one(data->domain, data->iommu,
data->table, PCI_BUS_NUM(alias),
alias & 0xff);
}
static int
domain_context_mapping(struct dmar_domain *domain, struct device *dev)
{
struct domain_context_mapping_data data;
struct pasid_table *table;
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
table = intel_pasid_get_table(dev);
if (!dev_is_pci(dev))
return domain_context_mapping_one(domain, iommu, table,
bus, devfn);
data.domain = domain;
data.iommu = iommu;
data.table = table;
return pci_for_each_dma_alias(to_pci_dev(dev),
&domain_context_mapping_cb, &data);
}
static int domain_context_mapped_cb(struct pci_dev *pdev,
u16 alias, void *opaque)
{
struct intel_iommu *iommu = opaque;
return !device_context_mapped(iommu, PCI_BUS_NUM(alias), alias & 0xff);
}
static int domain_context_mapped(struct device *dev)
{
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
if (!dev_is_pci(dev))
return device_context_mapped(iommu, bus, devfn);
return !pci_for_each_dma_alias(to_pci_dev(dev),
domain_context_mapped_cb, iommu);
}
/* Returns a number of VTD pages, but aligned to MM page size */
static inline unsigned long aligned_nrpages(unsigned long host_addr,
size_t size)
{
host_addr &= ~PAGE_MASK;
return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
/* Return largest possible superpage level for a given mapping */
static inline int hardware_largepage_caps(struct dmar_domain *domain,
unsigned long iov_pfn,
unsigned long phy_pfn,
unsigned long pages)
{
int support, level = 1;
unsigned long pfnmerge;
support = domain->iommu_superpage;
/* To use a large page, the virtual *and* physical addresses
must be aligned to 2MiB/1GiB/etc. Lower bits set in either
of them will mean we have to use smaller pages. So just
merge them and check both at once. */
pfnmerge = iov_pfn | phy_pfn;
while (support && !(pfnmerge & ~VTD_STRIDE_MASK)) {
pages >>= VTD_STRIDE_SHIFT;
if (!pages)
break;
pfnmerge >>= VTD_STRIDE_SHIFT;
level++;
support--;
}
return level;
}
static int
__domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
unsigned long phys_pfn, unsigned long nr_pages, int prot)
{
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
unsigned int largepage_lvl = 0;
unsigned long lvl_pages = 0;
2021-02-04 09:43:58 +08:00
struct dma_pte *pte = NULL;
phys_addr_t pteval;
u64 attr;
BUG_ON(!domain_pfn_supported(domain, iov_pfn + nr_pages - 1));
if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
if (domain_use_first_level(domain)) {
attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
if (domain->domain.type == IOMMU_DOMAIN_DMA) {
attr |= DMA_FL_PTE_ACCESS;
if (prot & DMA_PTE_WRITE)
attr |= DMA_FL_PTE_DIRTY;
}
}
pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
while (nr_pages > 0) {
uint64_t tmp;
if (!pte) {
largepage_lvl = hardware_largepage_caps(domain, iov_pfn,
phys_pfn, nr_pages);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
2021-02-04 09:43:58 +08:00
pte = pfn_to_dma_pte(domain, iov_pfn, &largepage_lvl);
if (!pte)
return -ENOMEM;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
/* It is large page*/
if (largepage_lvl > 1) {
unsigned long nr_superpages, end_pfn;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
pteval |= DMA_PTE_LARGE_PAGE;
lvl_pages = lvl_to_nr_pages(largepage_lvl);
nr_superpages = nr_pages / lvl_pages;
end_pfn = iov_pfn + nr_superpages * lvl_pages - 1;
/*
* Ensure that old small page tables are
* removed to make room for superpage(s).
* We're adding new large pages, so make sure
* we don't remove their parent tables.
*/
dma_pte_free_pagetable(domain, iov_pfn, end_pfn,
largepage_lvl + 1);
} else {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* We don't need lock here, nobody else
* touches the iova range
*/
tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
if (tmp) {
static int dumps = 5;
pr_crit("ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
iov_pfn, tmp, (unsigned long long)pteval);
if (dumps) {
dumps--;
debug_dma_dump_mappings(NULL);
}
WARN_ON(1);
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
lvl_pages = lvl_to_nr_pages(largepage_lvl);
BUG_ON(nr_pages < lvl_pages);
nr_pages -= lvl_pages;
iov_pfn += lvl_pages;
phys_pfn += lvl_pages;
pteval += lvl_pages * VTD_PAGE_SIZE;
/* If the next PTE would be the first in a new page, then we
* need to flush the cache on the entries we've just written.
* And then we'll need to recalculate 'pte', so clear it and
* let it get set again in the if (!pte) block above.
*
* If we're done (!nr_pages) we need to flush the cache too.
*
* Also if we've been setting superpages, we may need to
* recalculate 'pte' and switch back to smaller pages for the
* end of the mapping, if the trailing size is not enough to
* use another superpage (i.e. nr_pages < lvl_pages).
2021-02-04 09:43:58 +08:00
*
* We leave clflush for the leaf pte changes to iotlb_sync_map()
* callback.
*/
pte++;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!nr_pages || first_pte_in_page(pte) ||
2021-02-04 09:43:58 +08:00
(largepage_lvl > 1 && nr_pages < lvl_pages))
pte = NULL;
}
return 0;
}
static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
unsigned long flags;
struct context_entry *context;
u16 did_old;
if (!iommu)
return;
spin_lock_irqsave(&iommu->lock, flags);
context = iommu_context_addr(iommu, bus, devfn, 0);
if (!context) {
spin_unlock_irqrestore(&iommu->lock, flags);
return;
}
did_old = context_domain_id(context);
context_clear_entry(context);
__iommu_flush_cache(iommu, context, sizeof(*context));
spin_unlock_irqrestore(&iommu->lock, flags);
iommu->flush.flush_context(iommu,
did_old,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
iommu->flush.flush_iotlb(iommu,
did_old,
0,
0,
DMA_TLB_DSI_FLUSH);
}
static inline void unlink_domain_info(struct device_domain_info *info)
{
assert_spin_locked(&device_domain_lock);
list_del(&info->link);
list_del(&info->global);
if (info->dev)
dev_iommu_priv_set(info->dev, NULL);
}
static void domain_remove_dev_info(struct dmar_domain *domain)
{
struct device_domain_info *info, *tmp;
unsigned long flags;
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry_safe(info, tmp, &domain->devices, link)
__dmar_remove_one_dev_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
}
iommu/vt-d: debugfs: Add support to show page table internals Export page table internals of the domain attached to each device. Example of such dump on a Skylake machine: $ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct [ ... ] Device 0000:00:14.0 with pasid 0 @0x15f3d9000 IOVA_PFN PML5E PML4E 0x000000008ced0 | 0x0000000000000000 0x000000015f3da003 0x000000008ced1 | 0x0000000000000000 0x000000015f3da003 0x000000008ced2 | 0x0000000000000000 0x000000015f3da003 0x000000008ced3 | 0x0000000000000000 0x000000015f3da003 0x000000008ced4 | 0x0000000000000000 0x000000015f3da003 0x000000008ced5 | 0x0000000000000000 0x000000015f3da003 0x000000008ced6 | 0x0000000000000000 0x000000015f3da003 0x000000008ced7 | 0x0000000000000000 0x000000015f3da003 0x000000008ced8 | 0x0000000000000000 0x000000015f3da003 0x000000008ced9 | 0x0000000000000000 0x000000015f3da003 PDPE PDE PTE 0x000000015f3db003 0x000000015f3dc003 0x000000008ced0003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced1003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced2003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced3003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced4003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced5003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced6003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced7003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced8003 0x000000015f3db003 0x000000015f3dc003 0x000000008ced9003 [ ... ] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-02 08:18:22 +08:00
struct dmar_domain *find_domain(struct device *dev)
{
struct device_domain_info *info;
iommu/vt-d: Fix kernel NULL pointer dereference in find_domain() If calling find_domain() for a device which hasn't been probed by the iommu core, below kernel NULL pointer dereference issue happens. [ 362.736947] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 362.743953] #PF: supervisor read access in kernel mode [ 362.749115] #PF: error_code(0x0000) - not-present page [ 362.754278] PGD 0 P4D 0 [ 362.756843] Oops: 0000 [#1] SMP NOPTI [ 362.760528] CPU: 0 PID: 844 Comm: cat Not tainted 5.9.0-rc4-intel-next+ #1 [ 362.767428] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3384.A02.1909200816 09/20/2019 [ 362.781109] RIP: 0010:find_domain+0xd/0x40 [ 362.785234] Code: 48 81 fb 60 28 d9 b2 75 de 5b 41 5c 41 5d 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 e0 02 00 00 55 <48> 8b 40 38 48 89 e5 48 83 f8 fe 0f 94 c1 48 85 ff 0f 94 c2 08 d1 [ 362.804041] RSP: 0018:ffffb09cc1f0bd38 EFLAGS: 00010046 [ 362.809292] RAX: 0000000000000000 RBX: ffff905b98e4fac8 RCX: 0000000000000000 [ 362.816452] RDX: 0000000000000001 RSI: ffff905b98e4fac8 RDI: ffff905b9ccd40d0 [ 362.823617] RBP: ffffb09cc1f0bda0 R08: ffffb09cc1f0bd48 R09: 000000000000000f [ 362.830778] R10: ffffffffb266c080 R11: ffff905b9042602d R12: ffff905b98e4fac8 [ 362.837944] R13: ffffb09cc1f0bd48 R14: ffff905b9ccd40d0 R15: ffff905b98e4fac8 [ 362.845108] FS: 00007f8485460740(0000) GS:ffff905b9fc00000(0000) knlGS:0000000000000000 [ 362.853227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.858996] CR2: 0000000000000038 CR3: 00000004627a6003 CR4: 0000000000770ef0 [ 362.866161] PKRU: fffffffc [ 362.868890] Call Trace: [ 362.871363] ? show_device_domain_translation+0x32/0x100 [ 362.876700] ? bind_store+0x110/0x110 [ 362.880387] ? klist_next+0x91/0x120 [ 362.883987] ? domain_translation_struct_show+0x50/0x50 [ 362.889237] bus_for_each_dev+0x79/0xc0 [ 362.893121] domain_translation_struct_show+0x36/0x50 [ 362.898204] seq_read+0x135/0x410 [ 362.901545] ? handle_mm_fault+0xeb8/0x1750 [ 362.905755] full_proxy_read+0x5c/0x90 [ 362.909526] vfs_read+0xa6/0x190 [ 362.912782] ksys_read+0x61/0xe0 [ 362.916037] __x64_sys_read+0x1a/0x20 [ 362.919725] do_syscall_64+0x37/0x80 [ 362.923329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 362.928405] RIP: 0033:0x7f84855c5e95 Filter out those devices to avoid such error. Fixes: e2726daea583d ("iommu/vt-d: debugfs: Add support to show page table internals") Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org#v5.6+ Link: https://lore.kernel.org/r/20201028070725.24979-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-28 15:07:25 +08:00
if (unlikely(!dev || !dev->iommu))
return NULL;
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
if (unlikely(attach_deferred(dev)))
return NULL;
/* No lock here, assumes no domain exit in normal case */
info = get_domain_info(dev);
if (likely(info))
return info->domain;
return NULL;
}
static inline struct device_domain_info *
dmar_search_domain_by_dev_info(int segment, int bus, int devfn)
{
struct device_domain_info *info;
list_for_each_entry(info, &device_domain_list, global)
if (info->segment == segment && info->bus == bus &&
info->devfn == devfn)
return info;
return NULL;
}
static int domain_setup_first_level(struct intel_iommu *iommu,
struct dmar_domain *domain,
struct device *dev,
u32 pasid)
{
int flags = PASID_FLAG_SUPERVISOR_MODE;
struct dma_pte *pgd = domain->pgd;
int agaw, level;
/*
* Skip top levels of page tables for iommu which has
* less agaw than default. Unnecessary for PT mode.
*/
for (agaw = domain->agaw; agaw > iommu->agaw; agaw--) {
pgd = phys_to_virt(dma_pte_addr(pgd));
if (!dma_pte_present(pgd))
return -ENOMEM;
}
level = agaw_to_level(agaw);
if (level != 4 && level != 5)
return -EINVAL;
flags |= (level == 5) ? PASID_FLAG_FL5LP : 0;
return intel_pasid_setup_first_level(iommu, dev, (pgd_t *)pgd, pasid,
domain->iommu_did[iommu->seq_id],
flags);
}
static bool dev_is_real_dma_subdevice(struct device *dev)
{
return dev && dev_is_pci(dev) &&
pci_real_dma_dev(to_pci_dev(dev)) != to_pci_dev(dev);
}
static struct dmar_domain *dmar_insert_one_dev_info(struct intel_iommu *iommu,
int bus, int devfn,
struct device *dev,
struct dmar_domain *domain)
{
struct dmar_domain *found = NULL;
struct device_domain_info *info;
unsigned long flags;
int ret;
info = alloc_devinfo_mem();
if (!info)
return NULL;
if (!dev_is_real_dma_subdevice(dev)) {
info->bus = bus;
info->devfn = devfn;
info->segment = iommu->segment;
} else {
struct pci_dev *pdev = to_pci_dev(dev);
info->bus = pdev->bus->number;
info->devfn = pdev->devfn;
info->segment = pci_domain_nr(pdev->bus);
}
info->ats_supported = info->pasid_supported = info->pri_supported = 0;
info->ats_enabled = info->pasid_enabled = info->pri_enabled = 0;
info->ats_qdep = 0;
info->dev = dev;
info->domain = domain;
info->iommu = iommu;
info->pasid_table = NULL;
info->auxd_enabled = 0;
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
INIT_LIST_HEAD(&info->subdevices);
if (dev && dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(info->dev);
if (ecap_dev_iotlb_support(iommu->ecap) &&
pci_ats_supported(pdev) &&
dmar_find_matched_atsr_unit(pdev))
info->ats_supported = 1;
if (sm_supported(iommu)) {
if (pasid_supported(iommu)) {
int features = pci_pasid_features(pdev);
if (features >= 0)
info->pasid_supported = features | 1;
}
if (info->ats_supported && ecap_prs(iommu->ecap) &&
pci_pri_supported(pdev))
info->pri_supported = 1;
}
}
spin_lock_irqsave(&device_domain_lock, flags);
if (dev)
found = find_domain(dev);
if (!found) {
struct device_domain_info *info2;
info2 = dmar_search_domain_by_dev_info(info->segment, info->bus,
info->devfn);
if (info2) {
found = info2->domain;
info2->dev = dev;
}
}
if (found) {
spin_unlock_irqrestore(&device_domain_lock, flags);
free_devinfo_mem(info);
/* Caller must free the original domain */
return found;
}
spin_lock(&iommu->lock);
ret = domain_attach_iommu(domain, iommu);
spin_unlock(&iommu->lock);
if (ret) {
spin_unlock_irqrestore(&device_domain_lock, flags);
free_devinfo_mem(info);
return NULL;
}
list_add(&info->link, &domain->devices);
list_add(&info->global, &device_domain_list);
if (dev)
dev_iommu_priv_set(dev, info);
spin_unlock_irqrestore(&device_domain_lock, flags);
/* PASID table is mandatory for a PCI device in scalable mode. */
if (dev && dev_is_pci(dev) && sm_supported(iommu)) {
ret = intel_pasid_alloc_table(dev);
if (ret) {
dev_err(dev, "PASID table allocation failed\n");
dmar_remove_one_dev_info(dev);
return NULL;
}
/* Setup the PASID entry for requests without PASID: */
spin_lock_irqsave(&iommu->lock, flags);
if (hw_pass_through && domain_type_is_si(domain))
ret = intel_pasid_setup_pass_through(iommu, domain,
dev, PASID_RID2PASID);
else if (domain_use_first_level(domain))
ret = domain_setup_first_level(iommu, domain, dev,
PASID_RID2PASID);
else
ret = intel_pasid_setup_second_level(iommu, domain,
dev, PASID_RID2PASID);
spin_unlock_irqrestore(&iommu->lock, flags);
if (ret) {
dev_err(dev, "Setup RID2PASID failed\n");
dmar_remove_one_dev_info(dev);
return NULL;
}
}
if (dev && domain_context_mapping(domain, dev)) {
dev_err(dev, "Domain context map failed\n");
dmar_remove_one_dev_info(dev);
return NULL;
}
return domain;
}
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long first_vpfn,
unsigned long last_vpfn)
{
/*
* RMRR range might have overlap with physical memory range,
* clear it first
*/
dma_pte_clear_range(domain, first_vpfn, last_vpfn);
return __domain_mapping(domain, first_vpfn,
first_vpfn, last_vpfn - first_vpfn + 1,
DMA_PTE_READ|DMA_PTE_WRITE);
}
static int md_domain_init(struct dmar_domain *domain, int guest_width);
static int __init si_domain_init(int hw)
{
struct dmar_rmrr_unit *rmrr;
struct device *dev;
int i, nid, ret;
si_domain = alloc_domain(DOMAIN_FLAG_STATIC_IDENTITY);
if (!si_domain)
return -EFAULT;
if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
domain_exit(si_domain);
return -EFAULT;
}
if (hw)
return 0;
for_each_online_node(nid) {
unsigned long start_pfn, end_pfn;
int i;
for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, NULL) {
ret = iommu_domain_identity_map(si_domain,
mm_to_dma_pfn(start_pfn),
mm_to_dma_pfn(end_pfn));
if (ret)
return ret;
}
}
/*
* Identity map the RMRRs so that devices with RMRRs could also use
* the si_domain.
*/
for_each_rmrr_units(rmrr) {
for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
i, dev) {
unsigned long long start = rmrr->base_address;
unsigned long long end = rmrr->end_address;
if (WARN_ON(end < start ||
end >> agaw_to_width(si_domain->agaw)))
continue;
ret = iommu_domain_identity_map(si_domain,
mm_to_dma_pfn(start >> PAGE_SHIFT),
mm_to_dma_pfn(end >> PAGE_SHIFT));
if (ret)
return ret;
}
}
return 0;
}
static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev)
{
struct dmar_domain *ndomain;
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
ndomain = dmar_insert_one_dev_info(iommu, bus, devfn, dev, domain);
if (ndomain != domain)
return -EBUSY;
return 0;
}
static bool device_has_rmrr(struct device *dev)
{
struct dmar_rmrr_unit *rmrr;
struct device *tmp;
int i;
rcu_read_lock();
for_each_rmrr_units(rmrr) {
/*
* Return TRUE if this RMRR contains the device that
* is passed in.
*/
for_each_active_dev_scope(rmrr->devices,
rmrr->devices_cnt, i, tmp)
if (tmp == dev ||
is_downstream_to_pci_bridge(dev, tmp)) {
rcu_read_unlock();
return true;
}
}
rcu_read_unlock();
return false;
}
/**
* device_rmrr_is_relaxable - Test whether the RMRR of this device
* is relaxable (ie. is allowed to be not enforced under some conditions)
* @dev: device handle
*
* We assume that PCI USB devices with RMRRs have them largely
* for historical reasons and that the RMRR space is not actively used post
* boot. This exclusion may change if vendors begin to abuse it.
*
* The same exception is made for graphics devices, with the requirement that
* any use of the RMRR regions will be torn down before assigning the device
* to a guest.
*
* Return: true if the RMRR is relaxable, false otherwise
*/
static bool device_rmrr_is_relaxable(struct device *dev)
{
struct pci_dev *pdev;
if (!dev_is_pci(dev))
return false;
pdev = to_pci_dev(dev);
if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
return true;
else
return false;
}
/*
* There are a couple cases where we need to restrict the functionality of
* devices associated with RMRRs. The first is when evaluating a device for
* identity mapping because problems exist when devices are moved in and out
* of domains and their respective RMRR information is lost. This means that
* a device with associated RMRRs will never be in a "passthrough" domain.
* The second is use of the device through the IOMMU API. This interface
* expects to have full control of the IOVA space for the device. We cannot
* satisfy both the requirement that RMRR access is maintained and have an
* unencumbered IOVA space. We also have no ability to quiesce the device's
* use of the RMRR space or even inform the IOMMU API user of the restriction.
* We therefore prevent devices associated with an RMRR from participating in
* the IOMMU API, which eliminates them from device assignment.
*
* In both cases, devices which have relaxable RMRRs are not concerned by this
* restriction. See device_rmrr_is_relaxable comment.
*/
static bool device_is_rmrr_locked(struct device *dev)
{
if (!device_has_rmrr(dev))
return false;
if (device_rmrr_is_relaxable(dev))
return false;
return true;
}
/*
* Return the required default domain type for a specific device.
*
* @dev: the device in query
* @startup: true if this is during early boot
*
* Returns:
* - IOMMU_DOMAIN_DMA: device requires a dynamic mapping domain
* - IOMMU_DOMAIN_IDENTITY: device requires an identical mapping domain
* - 0: both identity and dynamic domains work for this device
*/
static int device_def_domain_type(struct device *dev)
{
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
return IOMMU_DOMAIN_IDENTITY;
if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
return IOMMU_DOMAIN_IDENTITY;
}
return 0;
}
static void intel_iommu_init_qi(struct intel_iommu *iommu)
{
/*
* Start from the sane iommu hardware state.
* If the queued invalidation is already initialized by us
* (for example, while enabling interrupt-remapping) then
* we got the things already rolling from a sane state.
*/
if (!iommu->qi) {
/*
* Clear any previous faults.
*/
dmar_fault(-1, iommu);
/*
* Disable queued invalidation if supported and already enabled
* before OS handover.
*/
dmar_disable_qi(iommu);
}
if (dmar_enable_qi(iommu)) {
/*
* Queued Invalidate not enabled, use Register Based Invalidate
*/
iommu->flush.flush_context = __iommu_flush_context;
iommu->flush.flush_iotlb = __iommu_flush_iotlb;
pr_info("%s: Using Register based invalidation\n",
iommu->name);
} else {
iommu->flush.flush_context = qi_flush_context;
iommu->flush.flush_iotlb = qi_flush_iotlb;
pr_info("%s: Using Queued invalidation\n", iommu->name);
}
}
static int copy_context_table(struct intel_iommu *iommu,
struct root_entry *old_re,
struct context_entry **tbl,
int bus, bool ext)
{
int tbl_idx, pos = 0, idx, devfn, ret = 0, did;
struct context_entry *new_ce = NULL, ce;
struct context_entry *old_ce = NULL;
struct root_entry re;
phys_addr_t old_ce_phys;
tbl_idx = ext ? bus * 2 : bus;
memcpy(&re, old_re, sizeof(re));
for (devfn = 0; devfn < 256; devfn++) {
/* First calculate the correct index */
idx = (ext ? devfn * 2 : devfn) % 256;
if (idx == 0) {
/* First save what we may have and clean up */
if (new_ce) {
tbl[tbl_idx] = new_ce;
__iommu_flush_cache(iommu, new_ce,
VTD_PAGE_SIZE);
pos = 1;
}
if (old_ce)
memunmap(old_ce);
ret = 0;
if (devfn < 0x80)
old_ce_phys = root_entry_lctp(&re);
else
old_ce_phys = root_entry_uctp(&re);
if (!old_ce_phys) {
if (ext && devfn == 0) {
/* No LCTP, try UCTP */
devfn = 0x7f;
continue;
} else {
goto out;
}
}
ret = -ENOMEM;
old_ce = memremap(old_ce_phys, PAGE_SIZE,
MEMREMAP_WB);
if (!old_ce)
goto out;
new_ce = alloc_pgtable_page(iommu->node);
if (!new_ce)
goto out_unmap;
ret = 0;
}
/* Now copy the context entry */
memcpy(&ce, old_ce + idx, sizeof(ce));
if (!__context_present(&ce))
continue;
did = context_domain_id(&ce);
if (did >= 0 && did < cap_ndoms(iommu->cap))
set_bit(did, iommu->domain_ids);
/*
* We need a marker for copied context entries. This
* marker needs to work for the old format as well as
* for extended context entries.
*
* Bit 67 of the context entry is used. In the old
* format this bit is available to software, in the
* extended format it is the PGE bit, but PGE is ignored
* by HW if PASIDs are disabled (and thus still
* available).
*
* So disable PASIDs first and then mark the entry
* copied. This means that we don't copy PASID
* translations from the old kernel, but this is fine as
* faults there are not fatal.
*/
context_clear_pasid_enable(&ce);
context_set_copied(&ce);
new_ce[idx] = ce;
}
tbl[tbl_idx + pos] = new_ce;
__iommu_flush_cache(iommu, new_ce, VTD_PAGE_SIZE);
out_unmap:
memunmap(old_ce);
out:
return ret;
}
static int copy_translation_tables(struct intel_iommu *iommu)
{
struct context_entry **ctxt_tbls;
struct root_entry *old_rt;
phys_addr_t old_rt_phys;
int ctxt_table_entries;
unsigned long flags;
u64 rtaddr_reg;
int bus, ret;
bool new_ext, ext;
rtaddr_reg = dmar_readq(iommu->reg + DMAR_RTADDR_REG);
ext = !!(rtaddr_reg & DMA_RTADDR_RTT);
new_ext = !!ecap_ecs(iommu->ecap);
/*
* The RTT bit can only be changed when translation is disabled,
* but disabling translation means to open a window for data
* corruption. So bail out and don't copy anything if we would
* have to change the bit.
*/
if (new_ext != ext)
return -EINVAL;
old_rt_phys = rtaddr_reg & VTD_PAGE_MASK;
if (!old_rt_phys)
return -EINVAL;
old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
if (!old_rt)
return -ENOMEM;
/* This is too big for the stack - allocate it from slab */
ctxt_table_entries = ext ? 512 : 256;
ret = -ENOMEM;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
ctxt_tbls = kcalloc(ctxt_table_entries, sizeof(void *), GFP_KERNEL);
if (!ctxt_tbls)
goto out_unmap;
for (bus = 0; bus < 256; bus++) {
ret = copy_context_table(iommu, &old_rt[bus],
ctxt_tbls, bus, ext);
if (ret) {
pr_err("%s: Failed to copy context table for bus %d\n",
iommu->name, bus);
continue;
}
}
spin_lock_irqsave(&iommu->lock, flags);
/* Context tables are copied, now write them to the root_entry table */
for (bus = 0; bus < 256; bus++) {
int idx = ext ? bus * 2 : bus;
u64 val;
if (ctxt_tbls[idx]) {
val = virt_to_phys(ctxt_tbls[idx]) | 1;
iommu->root_entry[bus].lo = val;
}
if (!ext || !ctxt_tbls[idx + 1])
continue;
val = virt_to_phys(ctxt_tbls[idx + 1]) | 1;
iommu->root_entry[bus].hi = val;
}
spin_unlock_irqrestore(&iommu->lock, flags);
kfree(ctxt_tbls);
__iommu_flush_cache(iommu, iommu->root_entry, PAGE_SIZE);
ret = 0;
out_unmap:
memunmap(old_rt);
return ret;
}
#ifdef CONFIG_INTEL_IOMMU_SVM
static ioasid_t intel_vcmd_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
{
struct intel_iommu *iommu = data;
ioasid_t ioasid;
if (!iommu)
return INVALID_IOASID;
/*
* VT-d virtual command interface always uses the full 20 bit
* PASID range. Host can partition guest PASID range based on
* policies but it is out of guest's control.
*/
if (min < PASID_MIN || max > intel_pasid_max_id)
return INVALID_IOASID;
if (vcmd_alloc_pasid(iommu, &ioasid))
return INVALID_IOASID;
return ioasid;
}
static void intel_vcmd_ioasid_free(ioasid_t ioasid, void *data)
{
struct intel_iommu *iommu = data;
if (!iommu)
return;
/*
* Sanity check the ioasid owner is done at upper layer, e.g. VFIO
* We can only free the PASID when all the devices are unbound.
*/
if (ioasid_find(NULL, ioasid, NULL)) {
pr_alert("Cannot free active IOASID %d\n", ioasid);
return;
}
vcmd_free_pasid(iommu, ioasid);
}
static void register_pasid_allocator(struct intel_iommu *iommu)
{
/*
* If we are running in the host, no need for custom allocator
* in that PASIDs are allocated from the host system-wide.
*/
if (!cap_caching_mode(iommu->cap))
return;
if (!sm_supported(iommu)) {
pr_warn("VT-d Scalable Mode not enabled, no PASID allocation\n");
return;
}
/*
* Register a custom PASID allocator if we are running in a guest,
* guest PASID must be obtained via virtual command interface.
* There can be multiple vIOMMUs in each guest but only one allocator
* is active. All vIOMMU allocators will eventually be calling the same
* host allocator.
*/
if (!vccap_pasid(iommu->vccap))
return;
pr_info("Register custom PASID allocator\n");
iommu->pasid_allocator.alloc = intel_vcmd_ioasid_alloc;
iommu->pasid_allocator.free = intel_vcmd_ioasid_free;
iommu->pasid_allocator.pdata = (void *)iommu;
if (ioasid_register_allocator(&iommu->pasid_allocator)) {
pr_warn("Custom PASID allocator failed, scalable mode disabled\n");
/*
* Disable scalable mode on this IOMMU if there
* is no custom allocator. Mixing SM capable vIOMMU
* and non-SM vIOMMU are not supported.
*/
intel_iommu_sm = 0;
}
}
#endif
static int __init init_dmars(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
int ret;
/*
* for each drhd
* allocate root
* initialize and program root entry to not present
* endfor
*/
for_each_drhd_unit(drhd) {
/*
* lock not needed as this is only incremented in the single
* threaded kernel __init code path all other access are read
* only
*/
if (g_num_of_iommus < DMAR_UNITS_SUPPORTED) {
g_num_of_iommus++;
continue;
}
pr_err_once("Exceeded %d IOMMUs\n", DMAR_UNITS_SUPPORTED);
}
/* Preallocate enough resources for IOMMU hot-addition */
if (g_num_of_iommus < DMAR_UNITS_SUPPORTED)
g_num_of_iommus = DMAR_UNITS_SUPPORTED;
g_iommus = kcalloc(g_num_of_iommus, sizeof(struct intel_iommu *),
GFP_KERNEL);
if (!g_iommus) {
pr_err("Allocating global iommu array failed\n");
ret = -ENOMEM;
goto error;
}
iommu/vt-d: Audit IOMMU Capabilities and add helper functions Audit IOMMU Capability/Extended Capability and check if the IOMMUs have the consistent value for features. Report out or scale to the lowest supported when IOMMU features have incompatibility among IOMMUs. Report out features when below features are mismatched: - First Level 5 Level Paging Support (FL5LP) - First Level 1 GByte Page Support (FL1GP) - Read Draining (DRD) - Write Draining (DWD) - Page Selective Invalidation (PSI) - Zero Length Read (ZLR) - Caching Mode (CM) - Protected High/Low-Memory Region (PHMR/PLMR) - Required Write-Buffer Flushing (RWBF) - Advanced Fault Logging (AFL) - RID-PASID Support (RPS) - Scalable Mode Page Walk Coherency (SMPWC) - First Level Translation Support (FLTS) - Second Level Translation Support (SLTS) - No Write Flag Support (NWFS) - Second Level Accessed/Dirty Support (SLADS) - Virtual Command Support (VCS) - Scalable Mode Translation Support (SMTS) - Device TLB Invalidation Throttle (DIT) - Page Drain Support (PDS) - Process Address Space ID Support (PASID) - Extended Accessed Flag Support (EAFS) - Supervisor Request Support (SRS) - Execute Request Support (ERS) - Page Request Support (PRS) - Nested Translation Support (NEST) - Snoop Control (SC) - Pass Through (PT) - Device TLB Support (DT) - Queued Invalidation (QI) - Page walk Coherency (C) Set capability to the lowest supported when below features are mismatched: - Maximum Address Mask Value (MAMV) - Number of Fault Recording Registers (NFR) - Second Level Large Page Support (SLLPS) - Fault Recording Offset (FRO) - Maximum Guest Address Width (MGAW) - Supported Adjusted Guest Address Width (SAGAW) - Number of Domains supported (NDOMS) - Pasid Size Supported (PSS) - Maximum Handle Mask Value (MHMV) - IOTLB Register Offset (IRO) Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04 09:43:56 +08:00
ret = intel_cap_audit(CAP_AUDIT_STATIC_DMAR, NULL);
if (ret)
goto free_iommu;
for_each_iommu(iommu, drhd) {
if (drhd->ignored) {
iommu_disable_translation(iommu);
continue;
}
/*
* Find the max pasid size of all IOMMU's in the system.
* We need to ensure the system pasid table is no bigger
* than the smallest supported.
*/
if (pasid_supported(iommu)) {
u32 temp = 2 << ecap_pss(iommu->ecap);
intel_pasid_max_id = min_t(u32, temp,
intel_pasid_max_id);
}
g_iommus[iommu->seq_id] = iommu;
intel_iommu_init_qi(iommu);
ret = iommu_init_domains(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
init_translation_status(iommu);
if (translation_pre_enabled(iommu) && !is_kdump_kernel()) {
iommu_disable_translation(iommu);
clear_translation_pre_enabled(iommu);
pr_warn("Translation was enabled for %s but we are not in kdump mode\n",
iommu->name);
}
/*
* TBD:
* we could share the same root & context tables
* among all IOMMU's. Need to Split it later.
*/
ret = iommu_alloc_root_entry(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
if (translation_pre_enabled(iommu)) {
pr_info("Translation already enabled - trying to copy translation structures\n");
ret = copy_translation_tables(iommu);
if (ret) {
/*
* We found the IOMMU with translation
* enabled - but failed to copy over the
* old root-entry table. Try to proceed
* by disabling translation now and
* allocating a clean root-entry table.
* This might cause DMAR faults, but
* probably the dump will still succeed.
*/
pr_err("Failed to copy translation tables from previous kernel for %s\n",
iommu->name);
iommu_disable_translation(iommu);
clear_translation_pre_enabled(iommu);
} else {
pr_info("Copied translation tables from previous kernel for %s\n",
iommu->name);
}
}
if (!ecap_pass_through(iommu->ecap))
hw_pass_through = 0;
intel_svm_check(iommu);
}
/*
* Now that qi is enabled on all iommus, set the root entry and flush
* caches. This is required on some Intel X58 chipsets, otherwise the
* flush_context function will loop forever and the boot hangs.
*/
for_each_active_iommu(iommu, drhd) {
iommu_flush_write_buffer(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
register_pasid_allocator(iommu);
#endif
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
#ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
dmar_map_gfx = 0;
#endif
if (!dmar_map_gfx)
iommu_identity_mapping |= IDENTMAP_GFX;
check_tylersburg_isoch();
ret = si_domain_init(hw_pass_through);
if (ret)
goto free_iommu;
/*
* for each drhd
* enable fault log
* global invalidate context cache
* global invalidate iotlb
* enable translation
*/
for_each_iommu(iommu, drhd) {
if (drhd->ignored) {
/*
* we always have to disable PMRs or DMA may fail on
* this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
continue;
}
iommu_flush_write_buffer(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_supported(iommu) && ecap_prs(iommu->ecap)) {
iommu/vt-d: Don't request page request irq under dmar_global_lock Requesting page reqest irq under dmar_global_lock could cause potential lock race condition (caught by lockdep). [ 4.100055] ====================================================== [ 4.100063] WARNING: possible circular locking dependency detected [ 4.100072] 5.1.0-rc4+ #2169 Not tainted [ 4.100078] ------------------------------------------------------ [ 4.100086] swapper/0/1 is trying to acquire lock: [ 4.100094] 000000007dcbe3c3 (dmar_lock){+.+.}, at: dmar_alloc_hwirq+0x35/0x140 [ 4.100112] but task is already holding lock: [ 4.100120] 0000000060bbe946 (dmar_global_lock){++++}, at: intel_iommu_init+0x191/0x1438 [ 4.100136] which lock already depends on the new lock. [ 4.100146] the existing dependency chain (in reverse order) is: [ 4.100155] -> #2 (dmar_global_lock){++++}: [ 4.100169] down_read+0x44/0xa0 [ 4.100178] intel_irq_remapping_alloc+0xb2/0x7b0 [ 4.100186] mp_irqdomain_alloc+0x9e/0x2e0 [ 4.100195] __irq_domain_alloc_irqs+0x131/0x330 [ 4.100203] alloc_isa_irq_from_domain.isra.4+0x9a/0xd0 [ 4.100212] mp_map_pin_to_irq+0x244/0x310 [ 4.100221] setup_IO_APIC+0x757/0x7ed [ 4.100229] x86_late_time_init+0x17/0x1c [ 4.100238] start_kernel+0x425/0x4e3 [ 4.100247] secondary_startup_64+0xa4/0xb0 [ 4.100254] -> #1 (irq_domain_mutex){+.+.}: [ 4.100265] __mutex_lock+0x7f/0x9d0 [ 4.100273] __irq_domain_add+0x195/0x2b0 [ 4.100280] irq_domain_create_hierarchy+0x3d/0x40 [ 4.100289] msi_create_irq_domain+0x32/0x110 [ 4.100297] dmar_alloc_hwirq+0x111/0x140 [ 4.100305] dmar_set_interrupt.part.14+0x1a/0x70 [ 4.100314] enable_drhd_fault_handling+0x2c/0x6c [ 4.100323] apic_bsp_setup+0x75/0x7a [ 4.100330] x86_late_time_init+0x17/0x1c [ 4.100338] start_kernel+0x425/0x4e3 [ 4.100346] secondary_startup_64+0xa4/0xb0 [ 4.100352] -> #0 (dmar_lock){+.+.}: [ 4.100364] lock_acquire+0xb4/0x1c0 [ 4.100372] __mutex_lock+0x7f/0x9d0 [ 4.100379] dmar_alloc_hwirq+0x35/0x140 [ 4.100389] intel_svm_enable_prq+0x61/0x180 [ 4.100397] intel_iommu_init+0x1128/0x1438 [ 4.100406] pci_iommu_init+0x16/0x3f [ 4.100414] do_one_initcall+0x5d/0x2be [ 4.100422] kernel_init_freeable+0x1f0/0x27c [ 4.100431] kernel_init+0xa/0x110 [ 4.100438] ret_from_fork+0x3a/0x50 [ 4.100444] other info that might help us debug this: [ 4.100454] Chain exists of: dmar_lock --> irq_domain_mutex --> dmar_global_lock [ 4.100469] Possible unsafe locking scenario: [ 4.100476] CPU0 CPU1 [ 4.100483] ---- ---- [ 4.100488] lock(dmar_global_lock); [ 4.100495] lock(irq_domain_mutex); [ 4.100503] lock(dmar_global_lock); [ 4.100512] lock(dmar_lock); [ 4.100518] *** DEADLOCK *** Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: a222a7f0bb6c9 ("iommu/vt-d: Implement page request handling") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-19 14:43:29 +08:00
/*
* Call dmar_alloc_hwirq() with dmar_global_lock held,
* could cause possible lock race condition.
*/
up_write(&dmar_global_lock);
ret = intel_svm_enable_prq(iommu);
iommu/vt-d: Don't request page request irq under dmar_global_lock Requesting page reqest irq under dmar_global_lock could cause potential lock race condition (caught by lockdep). [ 4.100055] ====================================================== [ 4.100063] WARNING: possible circular locking dependency detected [ 4.100072] 5.1.0-rc4+ #2169 Not tainted [ 4.100078] ------------------------------------------------------ [ 4.100086] swapper/0/1 is trying to acquire lock: [ 4.100094] 000000007dcbe3c3 (dmar_lock){+.+.}, at: dmar_alloc_hwirq+0x35/0x140 [ 4.100112] but task is already holding lock: [ 4.100120] 0000000060bbe946 (dmar_global_lock){++++}, at: intel_iommu_init+0x191/0x1438 [ 4.100136] which lock already depends on the new lock. [ 4.100146] the existing dependency chain (in reverse order) is: [ 4.100155] -> #2 (dmar_global_lock){++++}: [ 4.100169] down_read+0x44/0xa0 [ 4.100178] intel_irq_remapping_alloc+0xb2/0x7b0 [ 4.100186] mp_irqdomain_alloc+0x9e/0x2e0 [ 4.100195] __irq_domain_alloc_irqs+0x131/0x330 [ 4.100203] alloc_isa_irq_from_domain.isra.4+0x9a/0xd0 [ 4.100212] mp_map_pin_to_irq+0x244/0x310 [ 4.100221] setup_IO_APIC+0x757/0x7ed [ 4.100229] x86_late_time_init+0x17/0x1c [ 4.100238] start_kernel+0x425/0x4e3 [ 4.100247] secondary_startup_64+0xa4/0xb0 [ 4.100254] -> #1 (irq_domain_mutex){+.+.}: [ 4.100265] __mutex_lock+0x7f/0x9d0 [ 4.100273] __irq_domain_add+0x195/0x2b0 [ 4.100280] irq_domain_create_hierarchy+0x3d/0x40 [ 4.100289] msi_create_irq_domain+0x32/0x110 [ 4.100297] dmar_alloc_hwirq+0x111/0x140 [ 4.100305] dmar_set_interrupt.part.14+0x1a/0x70 [ 4.100314] enable_drhd_fault_handling+0x2c/0x6c [ 4.100323] apic_bsp_setup+0x75/0x7a [ 4.100330] x86_late_time_init+0x17/0x1c [ 4.100338] start_kernel+0x425/0x4e3 [ 4.100346] secondary_startup_64+0xa4/0xb0 [ 4.100352] -> #0 (dmar_lock){+.+.}: [ 4.100364] lock_acquire+0xb4/0x1c0 [ 4.100372] __mutex_lock+0x7f/0x9d0 [ 4.100379] dmar_alloc_hwirq+0x35/0x140 [ 4.100389] intel_svm_enable_prq+0x61/0x180 [ 4.100397] intel_iommu_init+0x1128/0x1438 [ 4.100406] pci_iommu_init+0x16/0x3f [ 4.100414] do_one_initcall+0x5d/0x2be [ 4.100422] kernel_init_freeable+0x1f0/0x27c [ 4.100431] kernel_init+0xa/0x110 [ 4.100438] ret_from_fork+0x3a/0x50 [ 4.100444] other info that might help us debug this: [ 4.100454] Chain exists of: dmar_lock --> irq_domain_mutex --> dmar_global_lock [ 4.100469] Possible unsafe locking scenario: [ 4.100476] CPU0 CPU1 [ 4.100483] ---- ---- [ 4.100488] lock(dmar_global_lock); [ 4.100495] lock(irq_domain_mutex); [ 4.100503] lock(dmar_global_lock); [ 4.100512] lock(dmar_lock); [ 4.100518] *** DEADLOCK *** Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: a222a7f0bb6c9 ("iommu/vt-d: Implement page request handling") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-04-19 14:43:29 +08:00
down_write(&dmar_global_lock);
if (ret)
goto free_iommu;
}
#endif
ret = dmar_set_interrupt(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
}
return 0;
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
free_iommu:
for_each_active_iommu(iommu, drhd) {
disable_dmar_iommu(iommu);
iommu/vt-d: keep shared resources when failed to initialize iommu devices Data structure drhd->iommu is shared between DMA remapping driver and interrupt remapping driver, so DMA remapping driver shouldn't release drhd->iommu when it failed to initialize IOMMU devices. Otherwise it may cause invalid memory access to the interrupt remapping driver. Sample stack dump: [ 13.315090] BUG: unable to handle kernel paging request at ffffc9000605a088 [ 13.323221] IP: [<ffffffff81461bac>] qi_submit_sync+0x15c/0x400 [ 13.330107] PGD 82f81e067 PUD c2f81e067 PMD 82e846067 PTE 0 [ 13.336818] Oops: 0002 [#1] SMP [ 13.340757] Modules linked in: [ 13.344422] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.13.0-rc1-gerry+ #7 [ 13.352474] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012 [ 13.365659] Workqueue: events work_for_cpu_fn [ 13.370774] task: ffff88042ddf00d0 ti: ffff88042ddee000 task.ti: ffff88042dde e000 [ 13.379389] RIP: 0010:[<ffffffff81461bac>] [<ffffffff81461bac>] qi_submit_sy nc+0x15c/0x400 [ 13.389055] RSP: 0000:ffff88042ddef940 EFLAGS: 00010002 [ 13.395151] RAX: 00000000000005e0 RBX: 0000000000000082 RCX: 0000000200000025 [ 13.403308] RDX: ffffc9000605a000 RSI: 0000000000000010 RDI: ffff88042ddb8610 [ 13.411446] RBP: ffff88042ddef9a0 R08: 00000000000005d0 R09: 0000000000000001 [ 13.419599] R10: 0000000000000000 R11: 000000000000005d R12: 000000000000005c [ 13.427742] R13: ffff88102d84d300 R14: 0000000000000174 R15: ffff88042ddb4800 [ 13.435877] FS: 0000000000000000(0000) GS:ffff88043de00000(0000) knlGS:00000 00000000000 [ 13.445168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.451749] CR2: ffffc9000605a088 CR3: 0000000001a0b000 CR4: 00000000000407f0 [ 13.459895] Stack: [ 13.462297] ffff88042ddb85d0 000000000000005d ffff88042ddef9b0 0000000000000 5d0 [ 13.471147] 00000000000005c0 ffff88042ddb8000 000000000000005c 0000000000000 015 [ 13.480001] ffff88042ddb4800 0000000000000282 ffff88042ddefa40 ffff88042ddef ac0 [ 13.488855] Call Trace: [ 13.491771] [<ffffffff8146848d>] modify_irte+0x9d/0xd0 [ 13.497778] [<ffffffff8146886d>] intel_setup_ioapic_entry+0x10d/0x290 [ 13.505250] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.512824] [<ffffffff810346b0>] ? default_init_apic_ldr+0x60/0x60 [ 13.519998] [<ffffffff81468be0>] setup_ioapic_remapped_entry+0x20/0x30 [ 13.527566] [<ffffffff8103683a>] io_apic_setup_irq_pin+0x12a/0x2c0 [ 13.534742] [<ffffffff8136673b>] ? acpi_pci_irq_find_prt_entry+0x2b9/0x2d8 [ 13.544102] [<ffffffff81037fd5>] io_apic_setup_irq_pin_once+0x85/0xa0 [ 13.551568] [<ffffffff8103816f>] ? mp_find_ioapic_pin+0x8f/0xf0 [ 13.558434] [<ffffffff81038044>] io_apic_set_pci_routing+0x34/0x70 [ 13.565621] [<ffffffff8102f4cf>] mp_register_gsi+0xaf/0x1c0 [ 13.572111] [<ffffffff8102f5ee>] acpi_register_gsi_ioapic+0xe/0x10 [ 13.579286] [<ffffffff8102f33f>] acpi_register_gsi+0xf/0x20 [ 13.585779] [<ffffffff81366b86>] acpi_pci_irq_enable+0x171/0x1e3 [ 13.592764] [<ffffffff8146d771>] pcibios_enable_device+0x31/0x40 [ 13.599744] [<ffffffff81320e9b>] do_pci_enable_device+0x3b/0x60 [ 13.606633] [<ffffffff81322248>] pci_enable_device_flags+0xc8/0x120 [ 13.613887] [<ffffffff813222f3>] pci_enable_device+0x13/0x20 [ 13.620484] [<ffffffff8132fa7e>] pcie_port_device_register+0x1e/0x510 [ 13.627947] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.635510] [<ffffffff810a947d>] ? trace_hardirqs_on+0xd/0x10 [ 13.642189] [<ffffffff813302b8>] pcie_portdrv_probe+0x58/0xc0 [ 13.648877] [<ffffffff81323ba5>] local_pci_probe+0x45/0xa0 [ 13.655266] [<ffffffff8106bc44>] work_for_cpu_fn+0x14/0x20 [ 13.661656] [<ffffffff8106fa79>] process_one_work+0x369/0x710 [ 13.668334] [<ffffffff8106fa02>] ? process_one_work+0x2f2/0x710 [ 13.675215] [<ffffffff81071d56>] ? worker_thread+0x46/0x690 [ 13.681714] [<ffffffff81072194>] worker_thread+0x484/0x690 [ 13.688109] [<ffffffff81071d10>] ? cancel_delayed_work_sync+0x20/0x20 [ 13.695576] [<ffffffff81079c60>] kthread+0xf0/0x110 [ 13.701300] [<ffffffff8108e7bf>] ? local_clock+0x3f/0x50 [ 13.707492] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 [ 13.714959] [<ffffffff81574d2c>] ret_from_fork+0x7c/0xb0 [ 13.721152] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-06 14:18:20 +08:00
free_dmar_iommu(iommu);
}
kfree(g_iommus);
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
error:
return ret;
}
static inline int iommu_domain_cache_init(void)
{
int ret = 0;
iommu_domain_cache = kmem_cache_create("iommu_domain",
sizeof(struct dmar_domain),
0,
SLAB_HWCACHE_ALIGN,
NULL);
if (!iommu_domain_cache) {
pr_err("Couldn't create iommu_domain cache\n");
ret = -ENOMEM;
}
return ret;
}
static inline int iommu_devinfo_cache_init(void)
{
int ret = 0;
iommu_devinfo_cache = kmem_cache_create("iommu_devinfo",
sizeof(struct device_domain_info),
0,
SLAB_HWCACHE_ALIGN,
NULL);
if (!iommu_devinfo_cache) {
pr_err("Couldn't create devinfo cache\n");
ret = -ENOMEM;
}
return ret;
}
static int __init iommu_init_mempool(void)
{
int ret;
ret = iova_cache_get();
if (ret)
return ret;
ret = iommu_domain_cache_init();
if (ret)
goto domain_error;
ret = iommu_devinfo_cache_init();
if (!ret)
return ret;
kmem_cache_destroy(iommu_domain_cache);
domain_error:
iova_cache_put();
return -ENOMEM;
}
static void __init iommu_exit_mempool(void)
{
kmem_cache_destroy(iommu_devinfo_cache);
kmem_cache_destroy(iommu_domain_cache);
iova_cache_put();
}
static void __init init_no_remapping_devices(void)
{
struct dmar_drhd_unit *drhd;
struct device *dev;
int i;
for_each_drhd_unit(drhd) {
if (!drhd->include_all) {
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev)
break;
/* ignore DMAR unit if no devices exist */
if (i == drhd->devices_cnt)
drhd->ignored = 1;
}
}
for_each_active_drhd_unit(drhd) {
if (drhd->include_all)
continue;
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev)
if (!dev_is_pci(dev) || !IS_GFX_DEVICE(to_pci_dev(dev)))
break;
if (i < drhd->devices_cnt)
continue;
/* This IOMMU has *only* gfx devices. Either bypass it or
set the gfx_mapped flag, as appropriate */
drhd->gfx_dedicated = 1;
iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-03 14:51:32 +08:00
if (!dmar_map_gfx)
drhd->ignored = 1;
}
}
#ifdef CONFIG_SUSPEND
static int init_iommu_hw(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
for_each_active_iommu(iommu, drhd)
if (iommu->qi)
dmar_reenable_qi(iommu);
for_each_iommu(iommu, drhd) {
if (drhd->ignored) {
/*
* we always have to disable PMRs or DMA may fail on
* this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
continue;
}
iommu_flush_write_buffer(iommu);
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0,
DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
}
return 0;
}
static void iommu_flush_all(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
for_each_active_iommu(iommu, drhd) {
iommu->flush.flush_context(iommu, 0, 0, 0,
DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0,
DMA_TLB_GLOBAL_FLUSH);
}
}
static int iommu_suspend(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
unsigned long flag;
for_each_active_iommu(iommu, drhd) {
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
iommu->iommu_state = kcalloc(MAX_SR_DMAR_REGS, sizeof(u32),
GFP_KERNEL);
if (!iommu->iommu_state)
goto nomem;
}
iommu_flush_all();
for_each_active_iommu(iommu, drhd) {
iommu_disable_translation(iommu);
raw_spin_lock_irqsave(&iommu->register_lock, flag);
iommu->iommu_state[SR_DMAR_FECTL_REG] =
readl(iommu->reg + DMAR_FECTL_REG);
iommu->iommu_state[SR_DMAR_FEDATA_REG] =
readl(iommu->reg + DMAR_FEDATA_REG);
iommu->iommu_state[SR_DMAR_FEADDR_REG] =
readl(iommu->reg + DMAR_FEADDR_REG);
iommu->iommu_state[SR_DMAR_FEUADDR_REG] =
readl(iommu->reg + DMAR_FEUADDR_REG);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
return 0;
nomem:
for_each_active_iommu(iommu, drhd)
kfree(iommu->iommu_state);
return -ENOMEM;
}
static void iommu_resume(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
unsigned long flag;
if (init_iommu_hw()) {
if (force_on)
panic("tboot: IOMMU setup failed, DMAR can not resume!\n");
else
WARN(1, "IOMMU setup failed, DMAR can not resume!\n");
return;
}
for_each_active_iommu(iommu, drhd) {
raw_spin_lock_irqsave(&iommu->register_lock, flag);
writel(iommu->iommu_state[SR_DMAR_FECTL_REG],
iommu->reg + DMAR_FECTL_REG);
writel(iommu->iommu_state[SR_DMAR_FEDATA_REG],
iommu->reg + DMAR_FEDATA_REG);
writel(iommu->iommu_state[SR_DMAR_FEADDR_REG],
iommu->reg + DMAR_FEADDR_REG);
writel(iommu->iommu_state[SR_DMAR_FEUADDR_REG],
iommu->reg + DMAR_FEUADDR_REG);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
for_each_active_iommu(iommu, drhd)
kfree(iommu->iommu_state);
}
static struct syscore_ops iommu_syscore_ops = {
.resume = iommu_resume,
.suspend = iommu_suspend,
};
static void __init init_iommu_pm_ops(void)
{
register_syscore_ops(&iommu_syscore_ops);
}
#else
static inline void init_iommu_pm_ops(void) {}
#endif /* CONFIG_PM */
static int rmrr_sanity_check(struct acpi_dmar_reserved_memory *rmrr)
{
if (!IS_ALIGNED(rmrr->base_address, PAGE_SIZE) ||
!IS_ALIGNED(rmrr->end_address + 1, PAGE_SIZE) ||
rmrr->end_address <= rmrr->base_address ||
arch_rmrr_sanity_check(rmrr))
return -EINVAL;
return 0;
}
int __init dmar_parse_one_rmrr(struct acpi_dmar_header *header, void *arg)
{
struct acpi_dmar_reserved_memory *rmrr;
struct dmar_rmrr_unit *rmrru;
rmrr = (struct acpi_dmar_reserved_memory *)header;
iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") call, with a pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: f5a68bb0752e ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Cc: Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
2020-03-09 22:01:38 +08:00
if (rmrr_sanity_check(rmrr)) {
pr_warn(FW_BUG
"Your BIOS is broken; bad RMRR [%#018Lx-%#018Lx]\n"
"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
rmrr->base_address, rmrr->end_address,
dmi_get_system_info(DMI_BIOS_VENDOR),
dmi_get_system_info(DMI_BIOS_VERSION),
dmi_get_system_info(DMI_PRODUCT_VERSION));
iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") call, with a pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: f5a68bb0752e ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Cc: Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
2020-03-09 22:01:38 +08:00
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
}
rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
if (!rmrru)
goto out;
rmrru->hdr = header;
rmrru->base_address = rmrr->base_address;
rmrru->end_address = rmrr->end_address;
rmrru->devices = dmar_alloc_dev_scope((void *)(rmrr + 1),
((void *)rmrr) + rmrr->header.length,
&rmrru->devices_cnt);
if (rmrru->devices_cnt && rmrru->devices == NULL)
goto free_rmrru;
list_add(&rmrru->list, &dmar_rmrr_units);
return 0;
free_rmrru:
kfree(rmrru);
out:
return -ENOMEM;
}
static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
{
struct dmar_atsr_unit *atsru;
struct acpi_dmar_atsr *tmp;
list_for_each_entry_rcu(atsru, &dmar_atsr_units, list,
dmar_rcu_check()) {
tmp = (struct acpi_dmar_atsr *)atsru->hdr;
if (atsr->segment != tmp->segment)
continue;
if (atsr->header.length != tmp->header.length)
continue;
if (memcmp(atsr, tmp, atsr->header.length) == 0)
return atsru;
}
return NULL;
}
int dmar_parse_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
if (system_state >= SYSTEM_RUNNING && !intel_iommu_enabled)
return 0;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (atsru)
return 0;
atsru = kzalloc(sizeof(*atsru) + hdr->length, GFP_KERNEL);
if (!atsru)
return -ENOMEM;
/*
* If memory is allocated from slab by ACPI _DSM method, we need to
* copy the memory content because the memory buffer will be freed
* on return.
*/
atsru->hdr = (void *)(atsru + 1);
memcpy(atsru->hdr, hdr, hdr->length);
atsru->include_all = atsr->flags & 0x1;
if (!atsru->include_all) {
atsru->devices = dmar_alloc_dev_scope((void *)(atsr + 1),
(void *)atsr + atsr->header.length,
&atsru->devices_cnt);
if (atsru->devices_cnt && atsru->devices == NULL) {
kfree(atsru);
return -ENOMEM;
}
}
list_add_rcu(&atsru->list, &dmar_atsr_units);
return 0;
}
static void intel_iommu_free_atsr(struct dmar_atsr_unit *atsru)
{
dmar_free_dev_scope(&atsru->devices, &atsru->devices_cnt);
kfree(atsru);
}
int dmar_release_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (atsru) {
list_del_rcu(&atsru->list);
synchronize_rcu();
intel_iommu_free_atsr(atsru);
}
return 0;
}
int dmar_check_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
int i;
struct device *dev;
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (!atsru)
return 0;
if (!atsru->include_all && atsru->devices && atsru->devices_cnt) {
for_each_active_dev_scope(atsru->devices, atsru->devices_cnt,
i, dev)
return -EBUSY;
}
return 0;
}
static struct dmar_satc_unit *dmar_find_satc(struct acpi_dmar_satc *satc)
{
struct dmar_satc_unit *satcu;
struct acpi_dmar_satc *tmp;
list_for_each_entry_rcu(satcu, &dmar_satc_units, list,
dmar_rcu_check()) {
tmp = (struct acpi_dmar_satc *)satcu->hdr;
if (satc->segment != tmp->segment)
continue;
if (satc->header.length != tmp->header.length)
continue;
if (memcmp(satc, tmp, satc->header.length) == 0)
return satcu;
}
return NULL;
}
int dmar_parse_one_satc(struct acpi_dmar_header *hdr, void *arg)
{
struct acpi_dmar_satc *satc;
struct dmar_satc_unit *satcu;
if (system_state >= SYSTEM_RUNNING && !intel_iommu_enabled)
return 0;
satc = container_of(hdr, struct acpi_dmar_satc, header);
satcu = dmar_find_satc(satc);
if (satcu)
return 0;
satcu = kzalloc(sizeof(*satcu) + hdr->length, GFP_KERNEL);
if (!satcu)
return -ENOMEM;
satcu->hdr = (void *)(satcu + 1);
memcpy(satcu->hdr, hdr, hdr->length);
satcu->atc_required = satc->flags & 0x1;
satcu->devices = dmar_alloc_dev_scope((void *)(satc + 1),
(void *)satc + satc->header.length,
&satcu->devices_cnt);
if (satcu->devices_cnt && !satcu->devices) {
kfree(satcu);
return -ENOMEM;
}
list_add_rcu(&satcu->list, &dmar_satc_units);
return 0;
}
static int intel_iommu_add(struct dmar_drhd_unit *dmaru)
{
int sp, ret;
struct intel_iommu *iommu = dmaru->iommu;
if (g_iommus[iommu->seq_id])
return 0;
iommu/vt-d: Audit IOMMU Capabilities and add helper functions Audit IOMMU Capability/Extended Capability and check if the IOMMUs have the consistent value for features. Report out or scale to the lowest supported when IOMMU features have incompatibility among IOMMUs. Report out features when below features are mismatched: - First Level 5 Level Paging Support (FL5LP) - First Level 1 GByte Page Support (FL1GP) - Read Draining (DRD) - Write Draining (DWD) - Page Selective Invalidation (PSI) - Zero Length Read (ZLR) - Caching Mode (CM) - Protected High/Low-Memory Region (PHMR/PLMR) - Required Write-Buffer Flushing (RWBF) - Advanced Fault Logging (AFL) - RID-PASID Support (RPS) - Scalable Mode Page Walk Coherency (SMPWC) - First Level Translation Support (FLTS) - Second Level Translation Support (SLTS) - No Write Flag Support (NWFS) - Second Level Accessed/Dirty Support (SLADS) - Virtual Command Support (VCS) - Scalable Mode Translation Support (SMTS) - Device TLB Invalidation Throttle (DIT) - Page Drain Support (PDS) - Process Address Space ID Support (PASID) - Extended Accessed Flag Support (EAFS) - Supervisor Request Support (SRS) - Execute Request Support (ERS) - Page Request Support (PRS) - Nested Translation Support (NEST) - Snoop Control (SC) - Pass Through (PT) - Device TLB Support (DT) - Queued Invalidation (QI) - Page walk Coherency (C) Set capability to the lowest supported when below features are mismatched: - Maximum Address Mask Value (MAMV) - Number of Fault Recording Registers (NFR) - Second Level Large Page Support (SLLPS) - Fault Recording Offset (FRO) - Maximum Guest Address Width (MGAW) - Supported Adjusted Guest Address Width (SAGAW) - Number of Domains supported (NDOMS) - Pasid Size Supported (PSS) - Maximum Handle Mask Value (MHMV) - IOTLB Register Offset (IRO) Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04 09:43:56 +08:00
ret = intel_cap_audit(CAP_AUDIT_HOTPLUG_DMAR, iommu);
if (ret)
goto out;
if (hw_pass_through && !ecap_pass_through(iommu->ecap)) {
pr_warn("%s: Doesn't support hardware pass through.\n",
iommu->name);
return -ENXIO;
}
if (!ecap_sc_support(iommu->ecap) &&
domain_update_iommu_snooping(iommu)) {
pr_warn("%s: Doesn't support snooping.\n",
iommu->name);
return -ENXIO;
}
sp = domain_update_iommu_superpage(NULL, iommu) - 1;
if (sp >= 0 && !(cap_super_page_val(iommu->cap) & (1 << sp))) {
pr_warn("%s: Doesn't support large page.\n",
iommu->name);
return -ENXIO;
}
/*
* Disable translation if already enabled prior to OS handover.
*/
if (iommu->gcmd & DMA_GCMD_TE)
iommu_disable_translation(iommu);
g_iommus[iommu->seq_id] = iommu;
ret = iommu_init_domains(iommu);
if (ret == 0)
ret = iommu_alloc_root_entry(iommu);
if (ret)
goto out;
intel_svm_check(iommu);
if (dmaru->ignored) {
/*
* we always have to disable PMRs or DMA may fail on this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
return 0;
}
intel_iommu_init_qi(iommu);
iommu_flush_write_buffer(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_supported(iommu) && ecap_prs(iommu->ecap)) {
ret = intel_svm_enable_prq(iommu);
if (ret)
goto disable_iommu;
}
#endif
ret = dmar_set_interrupt(iommu);
if (ret)
goto disable_iommu;
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
return 0;
disable_iommu:
disable_dmar_iommu(iommu);
out:
free_dmar_iommu(iommu);
return ret;
}
int dmar_iommu_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
{
int ret = 0;
struct intel_iommu *iommu = dmaru->iommu;
if (!intel_iommu_enabled)
return 0;
if (iommu == NULL)
return -EINVAL;
if (insert) {
ret = intel_iommu_add(dmaru);
} else {
disable_dmar_iommu(iommu);
free_dmar_iommu(iommu);
}
return ret;
}
static void intel_iommu_free_dmars(void)
{
struct dmar_rmrr_unit *rmrru, *rmrr_n;
struct dmar_atsr_unit *atsru, *atsr_n;
struct dmar_satc_unit *satcu, *satc_n;
list_for_each_entry_safe(rmrru, rmrr_n, &dmar_rmrr_units, list) {
list_del(&rmrru->list);
dmar_free_dev_scope(&rmrru->devices, &rmrru->devices_cnt);
kfree(rmrru);
}
list_for_each_entry_safe(atsru, atsr_n, &dmar_atsr_units, list) {
list_del(&atsru->list);
intel_iommu_free_atsr(atsru);
}
list_for_each_entry_safe(satcu, satc_n, &dmar_satc_units, list) {
list_del(&satcu->list);
dmar_free_dev_scope(&satcu->devices, &satcu->devices_cnt);
kfree(satcu);
}
}
int dmar_find_matched_atsr_unit(struct pci_dev *dev)
{
int i, ret = 1;
struct pci_bus *bus;
struct pci_dev *bridge = NULL;
struct device *tmp;
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
dev = pci_physfn(dev);
for (bus = dev->bus; bus; bus = bus->parent) {
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
bridge = bus->self;
/* If it's an integrated device, allow ATS */
if (!bridge)
return 1;
/* Connected via non-PCIe: no ATS */
if (!pci_is_pcie(bridge) ||
pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE)
return 0;
/* If we found the root port, look it up in the ATSR */
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
if (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT)
break;
}
rcu_read_lock();
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
if (atsr->segment != pci_domain_nr(dev->bus))
continue;
for_each_dev_scope(atsru->devices, atsru->devices_cnt, i, tmp)
if (tmp == &bridge->dev)
goto out;
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
if (atsru->include_all)
goto out;
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
}
ret = 0;
out:
rcu_read_unlock();
return ret;
}
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
int dmar_iommu_notify_scope_dev(struct dmar_pci_notify_info *info)
{
int ret;
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
struct dmar_rmrr_unit *rmrru;
struct dmar_atsr_unit *atsru;
struct dmar_satc_unit *satcu;
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
struct acpi_dmar_atsr *atsr;
struct acpi_dmar_reserved_memory *rmrr;
struct acpi_dmar_satc *satc;
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
if (!intel_iommu_enabled && system_state >= SYSTEM_RUNNING)
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
return 0;
list_for_each_entry(rmrru, &dmar_rmrr_units, list) {
rmrr = container_of(rmrru->hdr,
struct acpi_dmar_reserved_memory, header);
if (info->event == BUS_NOTIFY_ADD_DEVICE) {
ret = dmar_insert_dev_scope(info, (void *)(rmrr + 1),
((void *)rmrr) + rmrr->header.length,
rmrr->segment, rmrru->devices,
rmrru->devices_cnt);
if (ret < 0)
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
return ret;
} else if (info->event == BUS_NOTIFY_REMOVED_DEVICE) {
dmar_remove_dev_scope(info, rmrr->segment,
rmrru->devices, rmrru->devices_cnt);
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
}
}
list_for_each_entry(atsru, &dmar_atsr_units, list) {
if (atsru->include_all)
continue;
atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
if (info->event == BUS_NOTIFY_ADD_DEVICE) {
ret = dmar_insert_dev_scope(info, (void *)(atsr + 1),
(void *)atsr + atsr->header.length,
atsr->segment, atsru->devices,
atsru->devices_cnt);
if (ret > 0)
break;
else if (ret < 0)
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
return ret;
} else if (info->event == BUS_NOTIFY_REMOVED_DEVICE) {
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
if (dmar_remove_dev_scope(info, atsr->segment,
atsru->devices, atsru->devices_cnt))
break;
}
}
list_for_each_entry(satcu, &dmar_satc_units, list) {
satc = container_of(satcu->hdr, struct acpi_dmar_satc, header);
if (info->event == BUS_NOTIFY_ADD_DEVICE) {
ret = dmar_insert_dev_scope(info, (void *)(satc + 1),
(void *)satc + satc->header.length,
satc->segment, satcu->devices,
satcu->devices_cnt);
if (ret > 0)
break;
else if (ret < 0)
return ret;
} else if (info->event == BUS_NOTIFY_REMOVED_DEVICE) {
if (dmar_remove_dev_scope(info, satc->segment,
satcu->devices, satcu->devices_cnt))
break;
}
}
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
return 0;
}
static int intel_iommu_memory_notifier(struct notifier_block *nb,
unsigned long val, void *v)
{
struct memory_notify *mhp = v;
unsigned long start_vpfn = mm_to_dma_pfn(mhp->start_pfn);
unsigned long last_vpfn = mm_to_dma_pfn(mhp->start_pfn +
mhp->nr_pages - 1);
switch (val) {
case MEM_GOING_ONLINE:
if (iommu_domain_identity_map(si_domain,
start_vpfn, last_vpfn)) {
pr_warn("Failed to build identity map for [%lx-%lx]\n",
start_vpfn, last_vpfn);
return NOTIFY_BAD;
}
break;
case MEM_OFFLINE:
case MEM_CANCEL_ONLINE:
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
struct page *freelist;
freelist = domain_unmap(si_domain,
start_vpfn, last_vpfn,
NULL);
rcu_read_lock();
for_each_active_iommu(iommu, drhd)
iommu_flush_iotlb_psi(iommu, si_domain,
start_vpfn, mhp->nr_pages,
!freelist, 0);
rcu_read_unlock();
dma_free_pagelist(freelist);
}
break;
}
return NOTIFY_OK;
}
static struct notifier_block intel_iommu_memory_nb = {
.notifier_call = intel_iommu_memory_notifier,
.priority = 0
};
static void free_all_cpu_cached_iovas(unsigned int cpu)
{
int i;
for (i = 0; i < g_num_of_iommus; i++) {
struct intel_iommu *iommu = g_iommus[i];
struct dmar_domain *domain;
int did;
if (!iommu)
continue;
for (did = 0; did < cap_ndoms(iommu->cap); did++) {
domain = get_iommu_domain(iommu, (u16)did);
if (!domain || domain->domain.type != IOMMU_DOMAIN_DMA)
continue;
iommu_dma_free_cpu_cached_iovas(cpu, &domain->domain);
}
}
}
static int intel_iommu_cpu_dead(unsigned int cpu)
{
free_all_cpu_cached_iovas(cpu);
return 0;
}
static void intel_disable_iommus(void)
{
struct intel_iommu *iommu = NULL;
struct dmar_drhd_unit *drhd;
for_each_iommu(iommu, drhd)
iommu_disable_translation(iommu);
}
void intel_iommu_shutdown(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
if (no_iommu || dmar_disabled)
return;
down_write(&dmar_global_lock);
/* Disable PMRs explicitly here. */
for_each_iommu(iommu, drhd)
iommu_disable_protect_mem_regions(iommu);
/* Make sure the IOMMUs are switched off */
intel_disable_iommus();
up_write(&dmar_global_lock);
}
static inline struct intel_iommu *dev_to_intel_iommu(struct device *dev)
{
struct iommu_device *iommu_dev = dev_to_iommu_device(dev);
return container_of(iommu_dev, struct intel_iommu, iommu);
}
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
static ssize_t intel_iommu_show_version(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
u32 ver = readl(iommu->reg + DMAR_VER_REG);
return sprintf(buf, "%d:%d\n",
DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver));
}
static DEVICE_ATTR(version, S_IRUGO, intel_iommu_show_version, NULL);
static ssize_t intel_iommu_show_address(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->reg_phys);
}
static DEVICE_ATTR(address, S_IRUGO, intel_iommu_show_address, NULL);
static ssize_t intel_iommu_show_cap(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->cap);
}
static DEVICE_ATTR(cap, S_IRUGO, intel_iommu_show_cap, NULL);
static ssize_t intel_iommu_show_ecap(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->ecap);
}
static DEVICE_ATTR(ecap, S_IRUGO, intel_iommu_show_ecap, NULL);
static ssize_t intel_iommu_show_ndoms(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
return sprintf(buf, "%ld\n", cap_ndoms(iommu->cap));
}
static DEVICE_ATTR(domains_supported, S_IRUGO, intel_iommu_show_ndoms, NULL);
static ssize_t intel_iommu_show_ndoms_used(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
return sprintf(buf, "%d\n", bitmap_weight(iommu->domain_ids,
cap_ndoms(iommu->cap)));
}
static DEVICE_ATTR(domains_used, S_IRUGO, intel_iommu_show_ndoms_used, NULL);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
static struct attribute *intel_iommu_attrs[] = {
&dev_attr_version.attr,
&dev_attr_address.attr,
&dev_attr_cap.attr,
&dev_attr_ecap.attr,
&dev_attr_domains_supported.attr,
&dev_attr_domains_used.attr,
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
NULL,
};
static struct attribute_group intel_iommu_group = {
.name = "intel-iommu",
.attrs = intel_iommu_attrs,
};
const struct attribute_group *intel_iommu_groups[] = {
&intel_iommu_group,
NULL,
};
static inline bool has_external_pci(void)
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
{
struct pci_dev *pdev = NULL;
for_each_pci_dev(pdev)
if (pdev->external_facing)
return true;
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
return false;
}
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
static int __init platform_optin_force_iommu(void)
{
if (!dmar_platform_optin() || no_platform_optin || !has_external_pci())
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
return 0;
if (no_iommu || dmar_disabled)
pr_info("Intel-IOMMU force enabled due to platform opt in\n");
/*
* If Intel-IOMMU is disabled by default, we will apply identity
* map for all devices except those marked as being untrusted.
*/
if (dmar_disabled)
iommu_set_default_passthrough(false);
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
dmar_disabled = 0;
no_iommu = 0;
return 1;
}
static int __init probe_acpi_namespace_devices(void)
{
struct dmar_drhd_unit *drhd;
/* To avoid a -Wunused-but-set-variable warning. */
struct intel_iommu *iommu __maybe_unused;
struct device *dev;
int i, ret = 0;
for_each_active_iommu(iommu, drhd) {
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev) {
struct acpi_device_physical_node *pn;
struct iommu_group *group;
struct acpi_device *adev;
if (dev->bus != &acpi_bus_type)
continue;
adev = to_acpi_device(dev);
mutex_lock(&adev->physical_node_lock);
list_for_each_entry(pn,
&adev->physical_node_list, node) {
group = iommu_group_get(pn->dev);
if (group) {
iommu_group_put(group);
continue;
}
pn->dev->bus->iommu_ops = &intel_iommu_ops;
ret = iommu_probe_device(pn->dev);
if (ret)
break;
}
mutex_unlock(&adev->physical_node_lock);
if (ret)
return ret;
}
}
return 0;
}
int __init intel_iommu_init(void)
{
int ret = -ENODEV;
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
iommu/vt-d: Force IOMMU on for platform opt in hint Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR ACPI table [1] for BIOS to report compliance about platform initiated DMA restricted to RMRR ranges when transferring control to the OS. This means that during OS boot, before it enables IOMMU none of the connected devices can bypass DMA protection for instance by overwriting the data structures used by the IOMMU. The OS also treats this as a hint that the IOMMU should be enabled to prevent DMA attacks from possible malicious devices. A use of this flag is Kernel DMA protection for Thunderbolt [2] which in practice means that IOMMU should be enabled for PCIe devices connected to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA operations are limited in the range reserved for it, thus the DMA attacks are prevented. All these devices are enumerated in the PCI/PCIe module and marked with an untrusted flag. This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set in DMAR ACPI table and there are PCIe devices marked as untrusted in the system. This can be turned off by adding "intel_iommu=off" in the kernel command line, if any problems are found. [1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf [2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-10-23 15:45:01 +08:00
/*
* Intel IOMMU is required for a TXT/tboot launch or platform
* opt in, so enforce that.
*/
force_on = (!intel_iommu_tboot_noforce && tboot_force_iommu()) ||
platform_optin_force_iommu();
2014-02-19 14:07:33 +08:00
if (iommu_init_mempool()) {
if (force_on)
panic("tboot: Failed to initialize iommu memory\n");
return -ENOMEM;
}
down_write(&dmar_global_lock);
if (dmar_table_init()) {
if (force_on)
panic("tboot: Failed to initialize DMAR table\n");
goto out_free_dmar;
}
if (dmar_dev_scope_init() < 0) {
if (force_on)
panic("tboot: Failed to initialize DMAR device scope\n");
goto out_free_dmar;
}
up_write(&dmar_global_lock);
/*
* The bus notifier takes the dmar_global_lock, so lockdep will
* complain later when we register it under the lock.
*/
dmar_register_bus_notifier();
down_write(&dmar_global_lock);
if (!no_iommu)
intel_iommu_debugfs_init();
if (no_iommu || dmar_disabled) {
/*
* We exit the function here to ensure IOMMU's remapping and
* mempool aren't setup, which means that the IOMMU's PMRs
* won't be disabled via the call to init_dmars(). So disable
* it explicitly here. The PMRs were setup by tboot prior to
* calling SENTER, but the kernel is expected to reset/tear
* down the PMRs.
*/
if (intel_iommu_tboot_noforce) {
for_each_iommu(iommu, drhd)
iommu_disable_protect_mem_regions(iommu);
}
/*
* Make sure the IOMMUs are switched off, even when we
* boot into a kexec kernel and the previous kernel left
* them enabled
*/
intel_disable_iommus();
goto out_free_dmar;
}
if (list_empty(&dmar_rmrr_units))
pr_info("No RMRR found\n");
if (list_empty(&dmar_atsr_units))
pr_info("No ATSR found\n");
if (list_empty(&dmar_satc_units))
pr_info("No SATC found\n");
if (dmar_map_gfx)
intel_iommu_gfx_mapped = 1;
init_no_remapping_devices();
ret = init_dmars();
if (ret) {
if (force_on)
panic("tboot: Failed to initialize DMARs\n");
pr_err("Initialization failed\n");
goto out_free_dmar;
}
2014-02-19 14:07:33 +08:00
up_write(&dmar_global_lock);
init_iommu_pm_ops();
down_read(&dmar_global_lock);
for_each_active_iommu(iommu, drhd) {
iommu_device_sysfs_add(&iommu->iommu, NULL,
intel_iommu_groups,
"%s", iommu->name);
iommu_device_set_ops(&iommu->iommu, &intel_iommu_ops);
iommu_device_register(&iommu->iommu);
}
up_read(&dmar_global_lock);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
if (si_domain && !hw_pass_through)
register_memory_notifier(&intel_iommu_memory_nb);
cpuhp_setup_state(CPUHP_IOMMU_INTEL_DEAD, "iommu/intel:dead", NULL,
intel_iommu_cpu_dead);
iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices() The drhd and device scope list should be iterated with the iommu global lock held. Otherwise, a suspicious RCU usage message will be displayed. [ 3.695886] ============================= [ 3.695917] WARNING: suspicious RCU usage [ 3.695950] 5.2.0-rc2+ #2467 Not tainted [ 3.695981] ----------------------------- [ 3.696014] drivers/iommu/intel-iommu.c:4569 suspicious rcu_dereference_check() usage! [ 3.696069] other info that might help us debug this: [ 3.696126] rcu_scheduler_active = 2, debug_locks = 1 [ 3.696173] no locks held by swapper/0/1. [ 3.696204] stack backtrace: [ 3.696241] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2467 [ 3.696370] Call Trace: [ 3.696404] dump_stack+0x85/0xcb [ 3.696441] intel_iommu_init+0x128c/0x13ce [ 3.696478] ? kmem_cache_free+0x16b/0x2c0 [ 3.696516] ? __fput+0x14b/0x270 [ 3.696550] ? __call_rcu+0xb7/0x300 [ 3.696583] ? get_max_files+0x10/0x10 [ 3.696631] ? set_debug_rodata+0x11/0x11 [ 3.696668] ? e820__memblock_setup+0x60/0x60 [ 3.696704] ? pci_iommu_init+0x16/0x3f [ 3.696737] ? set_debug_rodata+0x11/0x11 [ 3.696770] pci_iommu_init+0x16/0x3f [ 3.696805] do_one_initcall+0x5d/0x2e4 [ 3.696844] ? set_debug_rodata+0x11/0x11 [ 3.696880] ? rcu_read_lock_sched_held+0x6b/0x80 [ 3.696924] kernel_init_freeable+0x1f0/0x27c [ 3.696961] ? rest_init+0x260/0x260 [ 3.696997] kernel_init+0xa/0x110 [ 3.697028] ret_from_fork+0x3a/0x50 Fixes: fa212a97f3a36 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12 08:28:49 +08:00
down_read(&dmar_global_lock);
if (probe_acpi_namespace_devices())
pr_warn("ACPI name space devices didn't probe correctly\n");
/* Finally, we enable the DMA remapping hardware. */
for_each_iommu(iommu, drhd) {
if (!drhd->ignored && !translation_pre_enabled(iommu))
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
}
up_read(&dmar_global_lock);
pr_info("Intel(R) Virtualization Technology for Directed I/O\n");
intel_iommu_enabled = 1;
return 0;
out_free_dmar:
intel_iommu_free_dmars();
2014-02-19 14:07:33 +08:00
up_write(&dmar_global_lock);
iommu_exit_mempool();
return ret;
}
static int domain_context_clear_one_cb(struct pci_dev *pdev, u16 alias, void *opaque)
{
struct intel_iommu *iommu = opaque;
domain_context_clear_one(iommu, PCI_BUS_NUM(alias), alias & 0xff);
return 0;
}
/*
* NB - intel-iommu lacks any sort of reference counting for the users of
* dependent devices. If multiple endpoints have intersecting dependent
* devices, unbinding the driver from any one of them will possibly leave
* the others unable to operate.
*/
static void domain_context_clear(struct intel_iommu *iommu, struct device *dev)
{
if (!iommu || !dev || !dev_is_pci(dev))
return;
pci_for_each_dma_alias(to_pci_dev(dev), &domain_context_clear_one_cb, iommu);
}
static void __dmar_remove_one_dev_info(struct device_domain_info *info)
{
struct dmar_domain *domain;
struct intel_iommu *iommu;
unsigned long flags;
assert_spin_locked(&device_domain_lock);
if (WARN_ON(!info))
return;
iommu = info->iommu;
domain = info->domain;
if (info->dev) {
if (dev_is_pci(info->dev) && sm_supported(iommu))
intel_pasid_tear_down_entry(iommu, info->dev,
PASID_RID2PASID, false);
iommu_disable_dev_iotlb(info);
if (!dev_is_real_dma_subdevice(info->dev))
domain_context_clear(iommu, info->dev);
intel_pasid_free_table(info->dev);
}
unlink_domain_info(info);
spin_lock_irqsave(&iommu->lock, flags);
domain_detach_iommu(domain, iommu);
spin_unlock_irqrestore(&iommu->lock, flags);
free_devinfo_mem(info);
}
static void dmar_remove_one_dev_info(struct device *dev)
{
struct device_domain_info *info;
unsigned long flags;
intel-iommu: Fix AB-BA lockdep report When unbinding a device so that I could pass it through to a KVM VM, I got the lockdep report below. It looks like a legitimate lock ordering problem: - domain_context_mapping_one() takes iommu->lock and calls iommu_support_dev_iotlb(), which takes device_domain_lock (inside iommu->lock). - domain_remove_one_dev_info() starts by taking device_domain_lock then takes iommu->lock inside it (near the end of the function). So this is the classic AB-BA deadlock. It looks like a safe fix is to simply release device_domain_lock a bit earlier, since as far as I can tell, it doesn't protect any of the stuff accessed at the end of domain_remove_one_dev_info() anyway. BTW, the use of device_domain_lock looks a bit unsafe to me... it's at least not obvious to me why we aren't vulnerable to the race below: iommu_support_dev_iotlb() domain_remove_dev_info() lock device_domain_lock find info unlock device_domain_lock lock device_domain_lock find same info unlock device_domain_lock free_devinfo_mem(info) do stuff with info after it's free However I don't understand the locking here well enough to know if this is a real problem, let alone what the best fix is. Anyway here's the full lockdep output that prompted all of this: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.39.1+ #1 ------------------------------------------------------- bash/13954 is trying to acquire lock: (&(&iommu->lock)->rlock){......}, at: [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 but task is already holding lock: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){-.-...}: [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f8350>] domain_context_mapping_one+0x600/0x750 [<ffffffff812f84df>] domain_context_mapping+0x3f/0x120 [<ffffffff812f9175>] iommu_prepare_identity_map+0x1c5/0x1e0 [<ffffffff81ccf1ca>] intel_iommu_init+0x88e/0xb5e [<ffffffff81cab204>] pci_iommu_init+0x16/0x41 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca3d3f>] kernel_init+0xe3/0x168 [<ffffffff8157ac24>] kernel_thread_helper+0x4/0x10 -> #0 (&(&iommu->lock)->rlock){......}: [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 6 locks held by bash/13954: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff811e4464>] sysfs_write_file+0x44/0x170 #1: (s_active#3){++++.+}, at: [<ffffffff811e44ed>] sysfs_write_file+0xcd/0x170 #2: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81372edb>] driver_unbind+0x9b/0xc0 #3: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81373cc7>] device_release_driver+0x27/0x50 #4: (&(&priv->bus_notifier)->rwsem){.+.+.+}, at: [<ffffffff8108974f>] __blocking_notifier_call_chain+0x5f/0xb0 #5: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 stack backtrace: Pid: 13954, comm: bash Not tainted 2.6.39.1+ #1 Call Trace: [<ffffffff810993a7>] print_circular_bug+0xf7/0x100 [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109d57d>] ? trace_hardirqs_on_caller+0x13d/0x180 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-07-20 21:22:21 +08:00
spin_lock_irqsave(&device_domain_lock, flags);
info = get_domain_info(dev);
if (info)
__dmar_remove_one_dev_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
}
static int md_domain_init(struct dmar_domain *domain, int guest_width)
{
int adjust_width;
/* calculate AGAW */
domain->gaw = guest_width;
adjust_width = guestwidth_to_adjustwidth(guest_width);
domain->agaw = width_to_agaw(adjust_width);
domain->iommu_coherency = 0;
domain->iommu_snooping = 0;
domain->iommu_superpage = 0;
domain->max_addr = 0;
/* always allocate the top pgd */
domain->pgd = (struct dma_pte *)alloc_pgtable_page(domain->nid);
if (!domain->pgd)
return -ENOMEM;
domain_flush_cache(domain, domain->pgd, PAGE_SIZE);
return 0;
}
static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)
{
struct dmar_domain *dmar_domain;
struct iommu_domain *domain;
switch (type) {
case IOMMU_DOMAIN_DMA:
case IOMMU_DOMAIN_UNMANAGED:
dmar_domain = alloc_domain(0);
if (!dmar_domain) {
pr_err("Can't allocate dmar_domain\n");
return NULL;
}
if (md_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
pr_err("Domain initialization failed\n");
domain_exit(dmar_domain);
return NULL;
}
if (type == IOMMU_DOMAIN_DMA &&
iommu_get_dma_cookie(&dmar_domain->domain))
return NULL;
domain = &dmar_domain->domain;
domain->geometry.aperture_start = 0;
domain->geometry.aperture_end =
__DOMAIN_MAX_ADDR(dmar_domain->gaw);
domain->geometry.force_aperture = true;
return domain;
case IOMMU_DOMAIN_IDENTITY:
return &si_domain->domain;
default:
return NULL;
}
return NULL;
}
static void intel_iommu_domain_free(struct iommu_domain *domain)
{
if (domain != &si_domain->domain)
domain_exit(to_dmar_domain(domain));
}
/*
* Check whether a @domain could be attached to the @dev through the
* aux-domain attach/detach APIs.
*/
static inline bool
is_aux_domain(struct device *dev, struct iommu_domain *domain)
{
struct device_domain_info *info = get_domain_info(dev);
return info && info->auxd_enabled &&
domain->type == IOMMU_DOMAIN_UNMANAGED;
}
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
static inline struct subdev_domain_info *
lookup_subdev_info(struct dmar_domain *domain, struct device *dev)
{
struct subdev_domain_info *sinfo;
if (!list_empty(&domain->subdevices)) {
list_for_each_entry(sinfo, &domain->subdevices, link_domain) {
if (sinfo->pdev == dev)
return sinfo;
}
}
return NULL;
}
static int auxiliary_link_device(struct dmar_domain *domain,
struct device *dev)
{
struct device_domain_info *info = get_domain_info(dev);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
struct subdev_domain_info *sinfo = lookup_subdev_info(domain, dev);
assert_spin_locked(&device_domain_lock);
if (WARN_ON(!info))
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
return -EINVAL;
if (!sinfo) {
sinfo = kzalloc(sizeof(*sinfo), GFP_ATOMIC);
sinfo->domain = domain;
sinfo->pdev = dev;
list_add(&sinfo->link_phys, &info->subdevices);
list_add(&sinfo->link_domain, &domain->subdevices);
}
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
return ++sinfo->users;
}
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
static int auxiliary_unlink_device(struct dmar_domain *domain,
struct device *dev)
{
struct device_domain_info *info = get_domain_info(dev);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
struct subdev_domain_info *sinfo = lookup_subdev_info(domain, dev);
int ret;
assert_spin_locked(&device_domain_lock);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
if (WARN_ON(!info || !sinfo || sinfo->users <= 0))
return -EINVAL;
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
ret = --sinfo->users;
if (!ret) {
list_del(&sinfo->link_phys);
list_del(&sinfo->link_domain);
kfree(sinfo);
}
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
return ret;
}
static int aux_domain_add_dev(struct dmar_domain *domain,
struct device *dev)
{
int ret;
unsigned long flags;
struct intel_iommu *iommu;
iommu = device_to_iommu(dev, NULL, NULL);
if (!iommu)
return -ENODEV;
if (domain->default_pasid <= 0) {
u32 pasid;
/* No private data needed for the default pasid */
pasid = ioasid_alloc(NULL, PASID_MIN,
pci_max_pasids(to_pci_dev(dev)) - 1,
NULL);
if (pasid == INVALID_IOASID) {
pr_err("Can't allocate default pasid\n");
return -ENODEV;
}
domain->default_pasid = pasid;
}
spin_lock_irqsave(&device_domain_lock, flags);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
ret = auxiliary_link_device(domain, dev);
if (ret <= 0)
goto link_failed;
/*
* Subdevices from the same physical device can be attached to the
* same domain. For such cases, only the first subdevice attachment
* needs to go through the full steps in this function. So if ret >
* 1, just goto out.
*/
if (ret > 1)
goto out;
/*
* iommu->lock must be held to attach domain to iommu and setup the
* pasid entry for second level translation.
*/
spin_lock(&iommu->lock);
ret = domain_attach_iommu(domain, iommu);
if (ret)
goto attach_failed;
/* Setup the PASID entry for mediated devices: */
if (domain_use_first_level(domain))
ret = domain_setup_first_level(iommu, domain, dev,
domain->default_pasid);
else
ret = intel_pasid_setup_second_level(iommu, domain, dev,
domain->default_pasid);
if (ret)
goto table_failed;
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
spin_unlock(&iommu->lock);
out:
spin_unlock_irqrestore(&device_domain_lock, flags);
return 0;
table_failed:
domain_detach_iommu(domain, iommu);
attach_failed:
spin_unlock(&iommu->lock);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
auxiliary_unlink_device(domain, dev);
link_failed:
spin_unlock_irqrestore(&device_domain_lock, flags);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
if (list_empty(&domain->subdevices) && domain->default_pasid > 0)
ioasid_put(domain->default_pasid);
return ret;
}
static void aux_domain_remove_dev(struct dmar_domain *domain,
struct device *dev)
{
struct device_domain_info *info;
struct intel_iommu *iommu;
unsigned long flags;
if (!is_aux_domain(dev, &domain->domain))
return;
spin_lock_irqsave(&device_domain_lock, flags);
info = get_domain_info(dev);
iommu = info->iommu;
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
if (!auxiliary_unlink_device(domain, dev)) {
spin_lock(&iommu->lock);
intel_pasid_tear_down_entry(iommu, dev,
domain->default_pasid, false);
domain_detach_iommu(domain, iommu);
spin_unlock(&iommu->lock);
}
spin_unlock_irqrestore(&device_domain_lock, flags);
iommu/vt-d: Fix general protection fault in aux_detach_device() The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 00:03:56 +08:00
if (list_empty(&domain->subdevices) && domain->default_pasid > 0)
ioasid_put(domain->default_pasid);
}
static int prepare_domain_attach_device(struct iommu_domain *domain,
struct device *dev)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct intel_iommu *iommu;
int addr_width;
iommu = device_to_iommu(dev, NULL, NULL);
if (!iommu)
return -ENODEV;
/* check if this iommu agaw is sufficient for max mapped address */
addr_width = agaw_to_width(iommu->agaw);
if (addr_width > cap_mgaw(iommu->cap))
addr_width = cap_mgaw(iommu->cap);
if (dmar_domain->max_addr > (1LL << addr_width)) {
dev_err(dev, "%s: iommu width (%d) is not "
"sufficient for the mapped address (%llx)\n",
__func__, addr_width, dmar_domain->max_addr);
return -EFAULT;
}
dmar_domain->gaw = addr_width;
/*
* Knock out extra levels of page tables if necessary
*/
while (iommu->agaw < dmar_domain->agaw) {
struct dma_pte *pte;
pte = dmar_domain->pgd;
if (dma_pte_present(pte)) {
dmar_domain->pgd = (struct dma_pte *)
phys_to_virt(dma_pte_addr(pte));
free_pgtable_page(pte);
}
dmar_domain->agaw--;
}
return 0;
}
static int intel_iommu_attach_device(struct iommu_domain *domain,
struct device *dev)
{
int ret;
if (domain->type == IOMMU_DOMAIN_UNMANAGED &&
device_is_rmrr_locked(dev)) {
dev_warn(dev, "Device is ineligible for IOMMU domain attach due to platform RMRR requirement. Contact your platform vendor.\n");
return -EPERM;
}
if (is_aux_domain(dev, domain))
return -EPERM;
/* normally dev is not mapped */
if (unlikely(domain_context_mapped(dev))) {
struct dmar_domain *old_domain;
old_domain = find_domain(dev);
if (old_domain)
dmar_remove_one_dev_info(dev);
}
ret = prepare_domain_attach_device(domain, dev);
if (ret)
return ret;
return domain_add_dev_info(to_dmar_domain(domain), dev);
}
static int intel_iommu_aux_attach_device(struct iommu_domain *domain,
struct device *dev)
{
int ret;
if (!is_aux_domain(dev, domain))
return -EPERM;
ret = prepare_domain_attach_device(domain, dev);
if (ret)
return ret;
return aux_domain_add_dev(to_dmar_domain(domain), dev);
}
static void intel_iommu_detach_device(struct iommu_domain *domain,
struct device *dev)
{
dmar_remove_one_dev_info(dev);
}
static void intel_iommu_aux_detach_device(struct iommu_domain *domain,
struct device *dev)
{
aux_domain_remove_dev(to_dmar_domain(domain), dev);
}
#ifdef CONFIG_INTEL_IOMMU_SVM
/*
* 2D array for converting and sanitizing IOMMU generic TLB granularity to
* VT-d granularity. Invalidation is typically included in the unmap operation
* as a result of DMA or VFIO unmap. However, for assigned devices guest
* owns the first level page tables. Invalidations of translation caches in the
* guest are trapped and passed down to the host.
*
* vIOMMU in the guest will only expose first level page tables, therefore
* we do not support IOTLB granularity for request without PASID (second level).
*
* For example, to find the VT-d granularity encoding for IOTLB
* type and page selective granularity within PASID:
* X: indexed by iommu cache type
* Y: indexed by enum iommu_inv_granularity
* [IOMMU_CACHE_INV_TYPE_IOTLB][IOMMU_INV_GRANU_ADDR]
*/
static const int
inv_type_granu_table[IOMMU_CACHE_INV_TYPE_NR][IOMMU_INV_GRANU_NR] = {
/*
* PASID based IOTLB invalidation: PASID selective (per PASID),
* page selective (address granularity)
*/
{-EINVAL, QI_GRAN_NONG_PASID, QI_GRAN_PSI_PASID},
/* PASID based dev TLBs */
{-EINVAL, -EINVAL, QI_DEV_IOTLB_GRAN_PASID_SEL},
/* PASID cache */
{-EINVAL, -EINVAL, -EINVAL}
};
static inline int to_vtd_granularity(int type, int granu)
{
return inv_type_granu_table[type][granu];
}
static inline u64 to_vtd_size(u64 granu_size, u64 nr_granules)
{
u64 nr_pages = (granu_size * nr_granules) >> VTD_PAGE_SHIFT;
/* VT-d size is encoded as 2^size of 4K pages, 0 for 4k, 9 for 2MB, etc.
* IOMMU cache invalidate API passes granu_size in bytes, and number of
* granu size in contiguous memory.
*/
return order_base_2(nr_pages);
}
static int
intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
struct iommu_cache_invalidate_info *inv_info)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct device_domain_info *info;
struct intel_iommu *iommu;
unsigned long flags;
int cache_type;
u8 bus, devfn;
u16 did, sid;
int ret = 0;
u64 size = 0;
if (!inv_info || !dmar_domain)
return -EINVAL;
if (!dev || !dev_is_pci(dev))
return -ENODEV;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
if (!(dmar_domain->flags & DOMAIN_FLAG_NESTING_MODE))
return -EINVAL;
spin_lock_irqsave(&device_domain_lock, flags);
spin_lock(&iommu->lock);
info = get_domain_info(dev);
if (!info) {
ret = -EINVAL;
goto out_unlock;
}
did = dmar_domain->iommu_did[iommu->seq_id];
sid = PCI_DEVID(bus, devfn);
/* Size is only valid in address selective invalidation */
if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
size = to_vtd_size(inv_info->granu.addr_info.granule_size,
inv_info->granu.addr_info.nb_granules);
for_each_set_bit(cache_type,
(unsigned long *)&inv_info->cache,
IOMMU_CACHE_INV_TYPE_NR) {
int granu = 0;
u64 pasid = 0;
u64 addr = 0;
granu = to_vtd_granularity(cache_type, inv_info->granularity);
if (granu == -EINVAL) {
pr_err_ratelimited("Invalid cache type and granu combination %d/%d\n",
cache_type, inv_info->granularity);
break;
}
/*
* PASID is stored in different locations based on the
* granularity.
*/
if (inv_info->granularity == IOMMU_INV_GRANU_PASID &&
(inv_info->granu.pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
pasid = inv_info->granu.pasid_info.pasid;
else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
(inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
pasid = inv_info->granu.addr_info.pasid;
switch (BIT(cache_type)) {
case IOMMU_CACHE_INV_TYPE_IOTLB:
/* HW will ignore LSB bits based on address mask */
if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
size &&
(inv_info->granu.addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
pr_err_ratelimited("User address not aligned, 0x%llx, size order %llu\n",
inv_info->granu.addr_info.addr, size);
}
/*
* If granu is PASID-selective, address is ignored.
* We use npages = -1 to indicate that.
*/
qi_flush_piotlb(iommu, did, pasid,
mm_to_dma_pfn(inv_info->granu.addr_info.addr),
(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
if (!info->ats_enabled)
break;
/*
* Always flush device IOTLB if ATS is enabled. vIOMMU
* in the guest may assume IOTLB flush is inclusive,
* which is more efficient.
*/
fallthrough;
case IOMMU_CACHE_INV_TYPE_DEV_IOTLB:
/*
* PASID based device TLB invalidation does not support
* IOMMU_INV_GRANU_PASID granularity but only supports
* IOMMU_INV_GRANU_ADDR.
* The equivalent of that is we set the size to be the
* entire range of 64 bit. User only provides PASID info
* without address info. So we set addr to 0.
*/
if (inv_info->granularity == IOMMU_INV_GRANU_PASID) {
size = 64 - VTD_PAGE_SHIFT;
addr = 0;
} else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR) {
addr = inv_info->granu.addr_info.addr;
}
if (info->ats_enabled)
qi_flush_dev_iotlb_pasid(iommu, sid,
info->pfsid, pasid,
info->ats_qdep, addr,
size);
else
pr_warn_ratelimited("Passdown device IOTLB flush w/o ATS!\n");
break;
default:
dev_err_ratelimited(dev, "Unsupported IOMMU invalidation type %d\n",
cache_type);
ret = -EINVAL;
}
}
out_unlock:
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
#endif
static int intel_iommu_map(struct iommu_domain *domain,
unsigned long iova, phys_addr_t hpa,
size_t size, int iommu_prot, gfp_t gfp)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
u64 max_addr;
int prot = 0;
if (iommu_prot & IOMMU_READ)
prot |= DMA_PTE_READ;
if (iommu_prot & IOMMU_WRITE)
prot |= DMA_PTE_WRITE;
if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
prot |= DMA_PTE_SNP;
max_addr = iova + size;
if (dmar_domain->max_addr < max_addr) {
u64 end;
/* check if minimum agaw is sufficient for mapped address */
end = __DOMAIN_MAX_ADDR(dmar_domain->gaw) + 1;
if (end < max_addr) {
pr_err("%s: iommu width (%d) is not "
"sufficient for the mapped address (%llx)\n",
__func__, dmar_domain->gaw, max_addr);
return -EFAULT;
}
dmar_domain->max_addr = max_addr;
}
/* Round up size to next multiple of PAGE_SIZE, if it and
the low bits of hpa would take us onto the next page */
size = aligned_nrpages(hpa, size);
2021-02-04 09:43:58 +08:00
return __domain_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
hpa >> VTD_PAGE_SHIFT, size, prot);
}
static size_t intel_iommu_unmap(struct iommu_domain *domain,
unsigned long iova, size_t size,
struct iommu_iotlb_gather *gather)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
unsigned long start_pfn, last_pfn;
int level = 0;
/* Cope with horrid API which requires us to unmap more than the
size argument if it happens to be a large-page mapping. */
BUG_ON(!pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT, &level));
if (size < VTD_PAGE_SIZE << level_to_offset_bits(level))
size = VTD_PAGE_SIZE << level_to_offset_bits(level);
start_pfn = iova >> VTD_PAGE_SHIFT;
last_pfn = (iova + size - 1) >> VTD_PAGE_SHIFT;
gather->freelist = domain_unmap(dmar_domain, start_pfn,
last_pfn, gather->freelist);
if (dmar_domain->max_addr == iova + size)
dmar_domain->max_addr = iova;
iommu_iotlb_gather_add_page(domain, gather, iova, size);
return size;
}
static void intel_iommu_tlb_sync(struct iommu_domain *domain,
struct iommu_iotlb_gather *gather)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
unsigned long iova_pfn = IOVA_PFN(gather->start);
size_t size = gather->end - gather->start;
unsigned long start_pfn;
unsigned long nrpages;
int iommu_id;
nrpages = aligned_nrpages(gather->start, size);
start_pfn = mm_to_dma_pfn(iova_pfn);
for_each_domain_iommu(iommu_id, dmar_domain)
iommu_flush_iotlb_psi(g_iommus[iommu_id], dmar_domain,
start_pfn, nrpages, !gather->freelist, 0);
dma_free_pagelist(gather->freelist);
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
dma_addr_t iova)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct dma_pte *pte;
int level = 0;
u64 phys = 0;
pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT, &level);
if (pte && dma_pte_present(pte))
phys = dma_pte_addr(pte) +
(iova & (BIT_MASK(level_to_offset_bits(level) +
VTD_PAGE_SHIFT) - 1));
return phys;
}
static bool intel_iommu_capable(enum iommu_cap cap)
{
if (cap == IOMMU_CAP_CACHE_COHERENCY)
return domain_update_iommu_snooping(NULL) == 1;
if (cap == IOMMU_CAP_INTR_REMAP)
return irq_remapping_enabled == 1;
return false;
}
static struct iommu_device *intel_iommu_probe_device(struct device *dev)
{
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
struct intel_iommu *iommu;
iommu = device_to_iommu(dev, NULL, NULL);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
if (!iommu)
return ERR_PTR(-ENODEV);
if (translation_pre_enabled(iommu))
dev_iommu_priv_set(dev, DEFER_DEVICE_DOMAIN_INFO);
return &iommu->iommu;
}
static void intel_iommu_release_device(struct device *dev)
{
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
struct intel_iommu *iommu;
iommu = device_to_iommu(dev, NULL, NULL);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
if (!iommu)
return;
dmar_remove_one_dev_info(dev);
set_dma_ops(dev, NULL);
}
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
static void intel_iommu_probe_finalize(struct device *dev)
{
dma_addr_t base = IOVA_START_PFN << VTD_PAGE_SHIFT;
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
if (domain && domain->type == IOMMU_DOMAIN_DMA)
iommu_setup_dma_ops(dev, base,
__DOMAIN_MAX_ADDR(dmar_domain->gaw) - base);
else
set_dma_ops(dev, NULL);
}
static void intel_iommu_get_resv_regions(struct device *device,
struct list_head *head)
{
int prot = DMA_PTE_READ | DMA_PTE_WRITE;
struct iommu_resv_region *reg;
struct dmar_rmrr_unit *rmrr;
struct device *i_dev;
int i;
down_read(&dmar_global_lock);
for_each_rmrr_units(rmrr) {
for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
i, i_dev) {
struct iommu_resv_region *resv;
enum iommu_resv_type type;
size_t length;
if (i_dev != device &&
!is_downstream_to_pci_bridge(device, i_dev))
continue;
length = rmrr->end_address - rmrr->base_address + 1;
type = device_rmrr_is_relaxable(device) ?
IOMMU_RESV_DIRECT_RELAXABLE : IOMMU_RESV_DIRECT;
resv = iommu_alloc_resv_region(rmrr->base_address,
length, prot, type);
if (!resv)
break;
list_add_tail(&resv->list, head);
}
}
up_read(&dmar_global_lock);
#ifdef CONFIG_INTEL_IOMMU_FLOPPY_WA
if (dev_is_pci(device)) {
struct pci_dev *pdev = to_pci_dev(device);
if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) {
reg = iommu_alloc_resv_region(0, 1UL << 24, prot,
iommu/vt-d: Set ISA bridge reserved region as relaxable Commit d850c2ee5fe2 ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions") created a direct-mapped reserved memory region in order to replace the static identity mapping of the ISA address space, where the latter was then removed in commit df4f3c603aeb ("iommu/vt-d: Remove static identity map code"). According to the history of this code and the Kconfig option surrounding it, this direct mapping exists for the benefit of legacy ISA drivers that are not compatible with the DMA API. In conjuntion with commit 9b77e5c79840 ("vfio/type1: check dma map request is within a valid iova range") this change introduced a regression where the vfio IOMMU backend enforces reserved memory regions per IOMMU group, preventing userspace from creating IOMMU mappings conflicting with prescribed reserved regions. A necessary prerequisite for the vfio change was the introduction of "relaxable" direct mappings introduced by commit adfd37382090 ("iommu: Introduce IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions"). These relaxable direct mappings provide the same identity mapping support in the default domain, but also indicate that the reservation is software imposed and may be relaxed under some conditions, such as device assignment. Convert the ISA bridge direct-mapped reserved region to relaxable to reflect that the restriction is self imposed and need not be enforced by drivers such as vfio. Fixes: 1c5c59fbad20 ("iommu/vt-d: Differentiate relaxable and non relaxable RMRRs") Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/linux-iommu/20191211082304.2d4fab45@x1.home Reported-by: cprt <cprt@protonmail.com> Tested-by: cprt <cprt@protonmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-12 04:28:29 +08:00
IOMMU_RESV_DIRECT_RELAXABLE);
if (reg)
list_add_tail(&reg->list, head);
}
}
#endif /* CONFIG_INTEL_IOMMU_FLOPPY_WA */
reg = iommu_alloc_resv_region(IOAPIC_RANGE_START,
IOAPIC_RANGE_END - IOAPIC_RANGE_START + 1,
iommu: Disambiguate MSI region types The introduction of reserved regions has left a couple of rough edges which we could do with sorting out sooner rather than later. Since we are not yet addressing the potential dynamic aspect of software-managed reservations and presenting them at arbitrary fixed addresses, it is incongruous that we end up displaying hardware vs. software-managed MSI regions to userspace differently, especially since ARM-based systems may actually require one or the other, or even potentially both at once, (which iommu-dma currently has no hope of dealing with at all). Let's resolve the former user-visible inconsistency ASAP before the ABI has been baked into a kernel release, in a way that also lays the groundwork for the latter shortcoming to be addressed by follow-up patches. For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use IOMMU_RESV_MSI to describe the hardware type, and document everything a little bit. Since the x86 MSI remapping hardware falls squarely under this meaning of IOMMU_RESV_MSI, apply that type to their regions as well, so that we tell the same story to userspace across all platforms. Secondly, as the various region types require quite different handling, and it really makes little sense to ever try combining them, convert the bitfield-esque #defines to a plain enum in the process before anyone gets the wrong impression. Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region") Reviewed-by: Eric Auger <eric.auger@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Woodhouse <dwmw2@infradead.org> CC: kvm@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-17 01:00:16 +08:00
0, IOMMU_RESV_MSI);
if (!reg)
return;
list_add_tail(&reg->list, head);
}
int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct device *dev)
{
struct device_domain_info *info;
struct context_entry *context;
struct dmar_domain *domain;
unsigned long flags;
u64 ctx_lo;
int ret;
domain = find_domain(dev);
if (!domain)
return -EINVAL;
spin_lock_irqsave(&device_domain_lock, flags);
spin_lock(&iommu->lock);
ret = -EINVAL;
info = get_domain_info(dev);
if (!info || !info->pasid_supported)
goto out;
context = iommu_context_addr(iommu, info->bus, info->devfn, 0);
if (WARN_ON(!context))
goto out;
ctx_lo = context[0].lo;
if (!(ctx_lo & CONTEXT_PASIDE)) {
ctx_lo |= CONTEXT_PASIDE;
context[0].lo = ctx_lo;
wmb();
iommu->flush.flush_context(iommu,
domain->iommu_did[iommu->seq_id],
PCI_DEVID(info->bus, info->devfn),
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
}
/* Enable PASID support in the device, if it wasn't already */
if (!info->pasid_enabled)
iommu_enable_dev_iotlb(info);
ret = 0;
out:
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU Starting with commit fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices"), we now probe DMA-capable ACPI name space devices. On Dell XPS 13 9343, which has an Intel LPSS platform device INTL9C60 enumerated via ACPI, this change leads to the following warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at pci_device_group+0x11a/0x130 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 5.5.0-rc3+ #22 Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A20 06/06/2019 RIP: 0010:pci_device_group+0x11a/0x130 Code: f0 ff ff 48 85 c0 49 89 c4 75 c4 48 8d 74 24 10 48 89 ef e8 48 ef ff ff 48 85 c0 49 89 c4 75 af e8 db f7 ff ff 49 89 c4 eb a5 <0f> 0b 49 c7 c4 ea ff ff ff eb 9a e8 96 1e c7 ff 66 0f 1f 44 00 00 RSP: 0000:ffffc0d6c0043cb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffa3d1d43dd810 RCX: 0000000000000000 RDX: ffffa3d1d4fecf80 RSI: ffffa3d12943dcc0 RDI: ffffa3d1d43dd810 RBP: ffffa3d1d43dd810 R08: 0000000000000000 R09: ffffa3d1d4c04a80 R10: ffffa3d1d4c00880 R11: ffffa3d1d44ba000 R12: 0000000000000000 R13: ffffa3d1d4383b80 R14: ffffa3d1d4c090d0 R15: ffffa3d1d4324530 FS: 0000000000000000(0000) GS:ffffa3d1d6700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000460a001 CR4: 00000000003606e0 Call Trace: ? iommu_group_get_for_dev+0x81/0x1f0 ? intel_iommu_add_device+0x61/0x170 ? iommu_probe_device+0x43/0xd0 ? intel_iommu_init+0x1fa2/0x2235 ? pci_iommu_init+0x52/0xe7 ? e820__memblock_setup+0x15c/0x15c ? do_one_initcall+0xcc/0x27e ? kernel_init_freeable+0x169/0x259 ? rest_init+0x95/0x95 ? kernel_init+0x5/0xeb ? ret_from_fork+0x35/0x40 ---[ end trace 28473e7abc25b92c ]--- DMAR: ACPI name space devices didn't probe correctly The bug results from the fact that while we now enumerate ACPI devices, we aren't able to handle any non-PCI device when generating the device group. Fix the issue by implementing an Intel-specific callback that returns `pci_device_group` only if the device is a PCI device. Otherwise, it will return a generic device group. Fixes: fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Patrick Steinhardt <ps@pks.im> Cc: stable@vger.kernel.org # v5.3+ Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-27 07:56:18 +08:00
static struct iommu_group *intel_iommu_device_group(struct device *dev)
{
if (dev_is_pci(dev))
return pci_device_group(dev);
return generic_device_group(dev);
}
static int intel_iommu_enable_auxd(struct device *dev)
{
struct device_domain_info *info;
struct intel_iommu *iommu;
unsigned long flags;
int ret;
iommu = device_to_iommu(dev, NULL, NULL);
if (!iommu || dmar_disabled)
return -EINVAL;
if (!sm_supported(iommu) || !pasid_supported(iommu))
return -EINVAL;
ret = intel_iommu_enable_pasid(iommu, dev);
if (ret)
return -ENODEV;
spin_lock_irqsave(&device_domain_lock, flags);
info = get_domain_info(dev);
info->auxd_enabled = 1;
spin_unlock_irqrestore(&device_domain_lock, flags);
return 0;
}
static int intel_iommu_disable_auxd(struct device *dev)
{
struct device_domain_info *info;
unsigned long flags;
spin_lock_irqsave(&device_domain_lock, flags);
info = get_domain_info(dev);
if (!WARN_ON(!info))
info->auxd_enabled = 0;
spin_unlock_irqrestore(&device_domain_lock, flags);
return 0;
}
/*
* A PCI express designated vendor specific extended capability is defined
* in the section 3.7 of Intel scalable I/O virtualization technical spec
* for system software and tools to detect endpoint devices supporting the
* Intel scalable IO virtualization without host driver dependency.
*
* Returns the address of the matching extended capability structure within
* the device's PCI configuration space or 0 if the device does not support
* it.
*/
static int siov_find_pci_dvsec(struct pci_dev *pdev)
{
int pos;
u16 vendor, id;
pos = pci_find_next_ext_capability(pdev, 0, 0x23);
while (pos) {
pci_read_config_word(pdev, pos + 4, &vendor);
pci_read_config_word(pdev, pos + 8, &id);
if (vendor == PCI_VENDOR_ID_INTEL && id == 5)
return pos;
pos = pci_find_next_ext_capability(pdev, pos, 0x23);
}
return 0;
}
static bool
intel_iommu_dev_has_feat(struct device *dev, enum iommu_dev_features feat)
{
if (feat == IOMMU_DEV_FEAT_AUX) {
int ret;
if (!dev_is_pci(dev) || dmar_disabled ||
!scalable_mode_support() || !pasid_mode_support())
return false;
ret = pci_pasid_features(to_pci_dev(dev));
if (ret < 0)
return false;
return !!siov_find_pci_dvsec(to_pci_dev(dev));
}
if (feat == IOMMU_DEV_FEAT_SVA) {
struct device_domain_info *info = get_domain_info(dev);
return info && (info->iommu->flags & VTD_FLAG_SVM_CAPABLE) &&
info->pasid_supported && info->pri_supported &&
info->ats_supported;
}
return false;
}
static int
intel_iommu_dev_enable_feat(struct device *dev, enum iommu_dev_features feat)
{
if (feat == IOMMU_DEV_FEAT_AUX)
return intel_iommu_enable_auxd(dev);
if (feat == IOMMU_DEV_FEAT_SVA) {
struct device_domain_info *info = get_domain_info(dev);
if (!info)
return -EINVAL;
if (info->iommu->flags & VTD_FLAG_SVM_CAPABLE)
return 0;
}
return -ENODEV;
}
static int
intel_iommu_dev_disable_feat(struct device *dev, enum iommu_dev_features feat)
{
if (feat == IOMMU_DEV_FEAT_AUX)
return intel_iommu_disable_auxd(dev);
return -ENODEV;
}
static bool
intel_iommu_dev_feat_enabled(struct device *dev, enum iommu_dev_features feat)
{
struct device_domain_info *info = get_domain_info(dev);
if (feat == IOMMU_DEV_FEAT_AUX)
return scalable_mode_support() && info && info->auxd_enabled;
return false;
}
static int
intel_iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
return dmar_domain->default_pasid > 0 ?
dmar_domain->default_pasid : -EINVAL;
}
static bool intel_iommu_is_attach_deferred(struct iommu_domain *domain,
struct device *dev)
{
return attach_deferred(dev);
}
static int
intel_iommu_domain_set_attr(struct iommu_domain *domain,
enum iommu_attr attr, void *data)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
unsigned long flags;
int ret = 0;
if (domain->type != IOMMU_DOMAIN_UNMANAGED)
return -EINVAL;
switch (attr) {
case DOMAIN_ATTR_NESTING:
spin_lock_irqsave(&device_domain_lock, flags);
if (nested_mode_support() &&
list_empty(&dmar_domain->devices)) {
dmar_domain->flags |= DOMAIN_FLAG_NESTING_MODE;
dmar_domain->flags &= ~DOMAIN_FLAG_USE_FIRST_LEVEL;
} else {
ret = -ENODEV;
}
spin_unlock_irqrestore(&device_domain_lock, flags);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
iommu/vt-d: Do not use flush-queue when caching-mode is on When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28 01:53:17 +08:00
static bool domain_use_flush_queue(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
bool r = true;
if (intel_iommu_strict)
return false;
/*
* The flush queue implementation does not perform page-selective
* invalidations that are required for efficient TLB flushes in virtual
* environments. The benefit of batching is likely to be much lower than
* the overhead of synchronizing the virtual and physical IOMMU
* page-tables.
*/
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (!cap_caching_mode(iommu->cap))
continue;
pr_warn_once("IOMMU batching is disabled due to virtualization");
r = false;
break;
}
rcu_read_unlock();
return r;
}
static int
intel_iommu_domain_get_attr(struct iommu_domain *domain,
enum iommu_attr attr, void *data)
{
switch (domain->type) {
case IOMMU_DOMAIN_UNMANAGED:
return -ENODEV;
case IOMMU_DOMAIN_DMA:
switch (attr) {
case DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE:
iommu/vt-d: Do not use flush-queue when caching-mode is on When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28 01:53:17 +08:00
*(int *)data = domain_use_flush_queue();
return 0;
default:
return -ENODEV;
}
break;
default:
return -EINVAL;
}
}
/*
* Check that the device does not live on an external facing PCI port that is
* marked as untrusted. Such devices should not be able to apply quirks and
* thus not be able to bypass the IOMMU restrictions.
*/
static bool risky_device(struct pci_dev *pdev)
{
if (pdev->untrusted) {
pci_info(pdev,
"Skipping IOMMU quirk for dev [%04X:%04X] on untrusted PCI link\n",
pdev->vendor, pdev->device);
pci_info(pdev, "Please check with your BIOS/Platform vendor about this\n");
return true;
}
return false;
}
2021-02-04 09:43:58 +08:00
static void clflush_sync_map(struct dmar_domain *domain, unsigned long clf_pfn,
unsigned long clf_pages)
{
struct dma_pte *first_pte = NULL, *pte = NULL;
unsigned long lvl_pages = 0;
int level = 0;
while (clf_pages > 0) {
if (!pte) {
level = 0;
pte = pfn_to_dma_pte(domain, clf_pfn, &level);
if (WARN_ON(!pte))
return;
first_pte = pte;
lvl_pages = lvl_to_nr_pages(level);
}
if (WARN_ON(!lvl_pages || clf_pages < lvl_pages))
return;
clf_pages -= lvl_pages;
clf_pfn += lvl_pages;
pte++;
if (!clf_pages || first_pte_in_page(pte) ||
(level > 1 && clf_pages < lvl_pages)) {
domain_flush_cache(domain, first_pte,
(void *)pte - (void *)first_pte);
pte = NULL;
}
}
}
static void intel_iommu_iotlb_sync_map(struct iommu_domain *domain,
unsigned long iova, size_t size)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
unsigned long pages = aligned_nrpages(iova, size);
unsigned long pfn = iova >> VTD_PAGE_SHIFT;
struct intel_iommu *iommu;
int iommu_id;
if (!dmar_domain->iommu_coherency)
clflush_sync_map(dmar_domain, pfn, pages);
for_each_domain_iommu(iommu_id, dmar_domain) {
iommu = g_iommus[iommu_id];
__mapping_notify_one(iommu, dmar_domain, pfn, pages);
}
}
const struct iommu_ops intel_iommu_ops = {
.capable = intel_iommu_capable,
.domain_alloc = intel_iommu_domain_alloc,
.domain_free = intel_iommu_domain_free,
.domain_get_attr = intel_iommu_domain_get_attr,
.domain_set_attr = intel_iommu_domain_set_attr,
.attach_dev = intel_iommu_attach_device,
.detach_dev = intel_iommu_detach_device,
.aux_attach_dev = intel_iommu_aux_attach_device,
.aux_detach_dev = intel_iommu_aux_detach_device,
.aux_get_pasid = intel_iommu_aux_get_pasid,
.map = intel_iommu_map,
2021-02-04 09:43:58 +08:00
.iotlb_sync_map = intel_iommu_iotlb_sync_map,
.unmap = intel_iommu_unmap,
.flush_iotlb_all = intel_flush_iotlb_all,
.iotlb_sync = intel_iommu_tlb_sync,
.iova_to_phys = intel_iommu_iova_to_phys,
.probe_device = intel_iommu_probe_device,
.probe_finalize = intel_iommu_probe_finalize,
.release_device = intel_iommu_release_device,
.get_resv_regions = intel_iommu_get_resv_regions,
.put_resv_regions = generic_iommu_put_resv_regions,
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU Starting with commit fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices"), we now probe DMA-capable ACPI name space devices. On Dell XPS 13 9343, which has an Intel LPSS platform device INTL9C60 enumerated via ACPI, this change leads to the following warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at pci_device_group+0x11a/0x130 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 5.5.0-rc3+ #22 Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A20 06/06/2019 RIP: 0010:pci_device_group+0x11a/0x130 Code: f0 ff ff 48 85 c0 49 89 c4 75 c4 48 8d 74 24 10 48 89 ef e8 48 ef ff ff 48 85 c0 49 89 c4 75 af e8 db f7 ff ff 49 89 c4 eb a5 <0f> 0b 49 c7 c4 ea ff ff ff eb 9a e8 96 1e c7 ff 66 0f 1f 44 00 00 RSP: 0000:ffffc0d6c0043cb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffa3d1d43dd810 RCX: 0000000000000000 RDX: ffffa3d1d4fecf80 RSI: ffffa3d12943dcc0 RDI: ffffa3d1d43dd810 RBP: ffffa3d1d43dd810 R08: 0000000000000000 R09: ffffa3d1d4c04a80 R10: ffffa3d1d4c00880 R11: ffffa3d1d44ba000 R12: 0000000000000000 R13: ffffa3d1d4383b80 R14: ffffa3d1d4c090d0 R15: ffffa3d1d4324530 FS: 0000000000000000(0000) GS:ffffa3d1d6700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000460a001 CR4: 00000000003606e0 Call Trace: ? iommu_group_get_for_dev+0x81/0x1f0 ? intel_iommu_add_device+0x61/0x170 ? iommu_probe_device+0x43/0xd0 ? intel_iommu_init+0x1fa2/0x2235 ? pci_iommu_init+0x52/0xe7 ? e820__memblock_setup+0x15c/0x15c ? do_one_initcall+0xcc/0x27e ? kernel_init_freeable+0x169/0x259 ? rest_init+0x95/0x95 ? kernel_init+0x5/0xeb ? ret_from_fork+0x35/0x40 ---[ end trace 28473e7abc25b92c ]--- DMAR: ACPI name space devices didn't probe correctly The bug results from the fact that while we now enumerate ACPI devices, we aren't able to handle any non-PCI device when generating the device group. Fix the issue by implementing an Intel-specific callback that returns `pci_device_group` only if the device is a PCI device. Otherwise, it will return a generic device group. Fixes: fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Patrick Steinhardt <ps@pks.im> Cc: stable@vger.kernel.org # v5.3+ Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-27 07:56:18 +08:00
.device_group = intel_iommu_device_group,
.dev_has_feat = intel_iommu_dev_has_feat,
.dev_feat_enabled = intel_iommu_dev_feat_enabled,
.dev_enable_feat = intel_iommu_dev_enable_feat,
.dev_disable_feat = intel_iommu_dev_disable_feat,
.is_attach_deferred = intel_iommu_is_attach_deferred,
.def_domain_type = device_def_domain_type,
.pgsize_bitmap = INTEL_IOMMU_PGSIZES,
#ifdef CONFIG_INTEL_IOMMU_SVM
.cache_invalidate = intel_iommu_sva_invalidate,
.sva_bind_gpasid = intel_svm_bind_gpasid,
.sva_unbind_gpasid = intel_svm_unbind_gpasid,
.sva_bind = intel_svm_bind,
.sva_unbind = intel_svm_unbind,
.sva_get_pasid = intel_svm_get_pasid,
.page_response = intel_svm_page_response,
#endif
};
static void quirk_iommu_igfx(struct pci_dev *dev)
{
if (risky_device(dev))
return;
pci_info(dev, "Disabling IOMMU for graphics on this chipset\n");
dmar_map_gfx = 0;
}
/* G4x/GM45 integrated gfx dmar support is totally busted. */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_igfx);
/* Broadwell igfx malfunctions with dmar */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1606, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160B, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160E, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1602, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160A, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160D, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1616, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x161B, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x161E, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1612, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x161A, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x161D, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1626, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x162B, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x162E, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1622, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x162A, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x162D, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1636, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163B, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163E, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx);
static void quirk_iommu_rwbf(struct pci_dev *dev)
{
if (risky_device(dev))
return;
/*
* Mobile 4 Series Chipset neglects to set RWBF capability,
* but needs it. Same seems to hold for the desktop versions.
*/
pci_info(dev, "Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_rwbf);
#define GGC 0x52
#define GGC_MEMORY_SIZE_MASK (0xf << 8)
#define GGC_MEMORY_SIZE_NONE (0x0 << 8)
#define GGC_MEMORY_SIZE_1M (0x1 << 8)
#define GGC_MEMORY_SIZE_2M (0x3 << 8)
#define GGC_MEMORY_VT_ENABLED (0x8 << 8)
#define GGC_MEMORY_SIZE_2M_VT (0x9 << 8)
#define GGC_MEMORY_SIZE_3M_VT (0xa << 8)
#define GGC_MEMORY_SIZE_4M_VT (0xb << 8)
static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
{
unsigned short ggc;
if (risky_device(dev))
return;
if (pci_read_config_word(dev, GGC, &ggc))
return;
if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
pci_info(dev, "BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
dmar_map_gfx = 0;
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
intel_iommu_strict = 1;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
static void quirk_igfx_skip_te_disable(struct pci_dev *dev)
{
unsigned short ver;
if (!IS_GFX_DEVICE(dev))
return;
ver = (dev->device >> 8) & 0xff;
if (ver != 0x45 && ver != 0x46 && ver != 0x4c &&
ver != 0x4e && ver != 0x8a && ver != 0x98 &&
ver != 0x9a)
return;
if (risky_device(dev))
return;
pci_info(dev, "Skip IOMMU disabling for graphics\n");
iommu_skip_te_disable = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_igfx_skip_te_disable);
/* On Tylersburg chipsets, some BIOSes have been known to enable the
ISOCH DMAR unit for the Azalia sound device, but not give it any
TLB entries, which causes it to deadlock. Check for that. We do
this in a function called from init_dmars(), instead of in a PCI
quirk, because we don't want to print the obnoxious "BIOS broken"
message if VT-d is actually disabled.
*/
static void __init check_tylersburg_isoch(void)
{
struct pci_dev *pdev;
uint32_t vtisochctrl;
/* If there's no Azalia in the system anyway, forget it. */
pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
if (!pdev)
return;
if (risky_device(pdev)) {
pci_dev_put(pdev);
return;
}
pci_dev_put(pdev);
/* System Management Registers. Might be hidden, in which case
we can't do the sanity check. But that's OK, because the
known-broken BIOSes _don't_ actually hide it, so far. */
pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
if (!pdev)
return;
if (risky_device(pdev)) {
pci_dev_put(pdev);
return;
}
if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
pci_dev_put(pdev);
return;
}
pci_dev_put(pdev);
/* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
if (vtisochctrl & 1)
return;
/* Drop all bits other than the number of TLB entries */
vtisochctrl &= 0x1c;
/* If we have the recommended number of TLB entries (16), fine. */
if (vtisochctrl == 0x10)
return;
/* Zero TLB entries? You get to ride the short bus to school. */
if (!vtisochctrl) {
WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
dmi_get_system_info(DMI_BIOS_VENDOR),
dmi_get_system_info(DMI_BIOS_VERSION),
dmi_get_system_info(DMI_PRODUCT_VERSION));
iommu_identity_mapping |= IDENTMAP_AZALIA;
return;
}
pr_warn("Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
vtisochctrl);
}