OpenCloudOS-Kernel/drivers/s390/block/dasd_devmap.c

1748 lines
41 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Horst Hummel <Horst.Hummel@de.ibm.com>
* Carsten Otte <Cotte@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* Copyright IBM Corp. 1999,2001
*
* Device mapping and dasd= parameter parsing functions. All devmap
* functions may not be called from interrupt context. In particular
* dasd_get_device is a no-no from interrupt context.
*
*/
#define KMSG_COMPONENT "dasd"
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/debug.h>
#include <linux/uaccess.h>
#include <asm/ipl.h>
/* This is ugly... */
#define PRINTK_HEADER "dasd_devmap:"
#define DASD_BUS_ID_SIZE 20
#define DASD_MAX_PARAMS 256
#include "dasd_int.h"
struct kmem_cache *dasd_page_cache;
EXPORT_SYMBOL_GPL(dasd_page_cache);
/*
* dasd_devmap_t is used to store the features and the relation
* between device number and device index. To find a dasd_devmap_t
* that corresponds to a device number of a device index each
* dasd_devmap_t is added to two linked lists, one to search by
* the device number and one to search by the device index. As
* soon as big minor numbers are available the device index list
* can be removed since the device number will then be identical
* to the device index.
*/
struct dasd_devmap {
struct list_head list;
char bus_id[DASD_BUS_ID_SIZE];
unsigned int devindex;
unsigned short features;
struct dasd_device *device;
};
/*
* Parameter parsing functions for dasd= parameter. The syntax is:
* <devno> : (0x)?[0-9a-fA-F]+
* <busid> : [0-0a-f]\.[0-9a-f]\.(0x)?[0-9a-fA-F]+
* <feature> : ro
* <feature_list> : \(<feature>(:<feature>)*\)
* <devno-range> : <devno>(-<devno>)?<feature_list>?
* <busid-range> : <busid>(-<busid>)?<feature_list>?
* <devices> : <devno-range>|<busid-range>
* <dasd_module> : dasd_diag_mod|dasd_eckd_mod|dasd_fba_mod
*
* <dasd> : autodetect|probeonly|<devices>(,<devices>)*
*/
int dasd_probeonly = 0; /* is true, when probeonly mode is active */
int dasd_autodetect = 0; /* is true, when autodetection is active */
int dasd_nopav = 0; /* is true, when PAV is disabled */
EXPORT_SYMBOL_GPL(dasd_nopav);
int dasd_nofcx; /* disable High Performance Ficon */
EXPORT_SYMBOL_GPL(dasd_nofcx);
/*
* char *dasd[] is intended to hold the ranges supplied by the dasd= statement
* it is named 'dasd' to directly be filled by insmod with the comma separated
* strings when running as a module.
*/
static char *dasd[DASD_MAX_PARAMS];
module_param_array(dasd, charp, NULL, S_IRUGO);
/*
* Single spinlock to protect devmap and servermap structures and lists.
*/
static DEFINE_SPINLOCK(dasd_devmap_lock);
/*
* Hash lists for devmap structures.
*/
static struct list_head dasd_hashlists[256];
int dasd_max_devindex;
static struct dasd_devmap *dasd_add_busid(const char *, int);
static inline int
dasd_hash_busid(const char *bus_id)
{
int hash, i;
hash = 0;
for (i = 0; (i < DASD_BUS_ID_SIZE) && *bus_id; i++, bus_id++)
hash += *bus_id;
return hash & 0xff;
}
#ifndef MODULE
static int __init dasd_call_setup(char *opt)
{
static int i __initdata;
char *tmp;
while (i < DASD_MAX_PARAMS) {
tmp = strsep(&opt, ",");
if (!tmp)
break;
dasd[i++] = tmp;
}
return 1;
}
__setup ("dasd=", dasd_call_setup);
#endif /* #ifndef MODULE */
#define DASD_IPLDEV "ipldev"
/*
* Read a device busid/devno from a string.
*/
static int __init dasd_busid(char *str, int *id0, int *id1, int *devno)
{
unsigned int val;
char *tok;
/* Interpret ipldev busid */
if (strncmp(DASD_IPLDEV, str, strlen(DASD_IPLDEV)) == 0) {
if (ipl_info.type != IPL_TYPE_CCW) {
pr_err("The IPL device is not a CCW device\n");
return -EINVAL;
}
*id0 = 0;
*id1 = ipl_info.data.ccw.dev_id.ssid;
*devno = ipl_info.data.ccw.dev_id.devno;
return 0;
}
/* Old style 0xXXXX or XXXX */
if (!kstrtouint(str, 16, &val)) {
*id0 = *id1 = 0;
if (val > 0xffff)
return -EINVAL;
*devno = val;
return 0;
}
/* New style x.y.z busid */
tok = strsep(&str, ".");
if (kstrtouint(tok, 16, &val) || val > 0xff)
return -EINVAL;
*id0 = val;
tok = strsep(&str, ".");
if (kstrtouint(tok, 16, &val) || val > 0xff)
return -EINVAL;
*id1 = val;
tok = strsep(&str, ".");
if (kstrtouint(tok, 16, &val) || val > 0xffff)
return -EINVAL;
*devno = val;
return 0;
}
/*
* Read colon separated list of dasd features.
*/
static int __init dasd_feature_list(char *str)
{
int features, len, rc;
features = 0;
rc = 0;
if (!str)
return DASD_FEATURE_DEFAULT;
while (1) {
for (len = 0;
str[len] && str[len] != ':' && str[len] != ')'; len++);
if (len == 2 && !strncmp(str, "ro", 2))
features |= DASD_FEATURE_READONLY;
else if (len == 4 && !strncmp(str, "diag", 4))
features |= DASD_FEATURE_USEDIAG;
else if (len == 3 && !strncmp(str, "raw", 3))
features |= DASD_FEATURE_USERAW;
else if (len == 6 && !strncmp(str, "erplog", 6))
features |= DASD_FEATURE_ERPLOG;
else if (len == 8 && !strncmp(str, "failfast", 8))
features |= DASD_FEATURE_FAILFAST;
else {
pr_warn("%*s is not a supported device option\n",
len, str);
rc = -EINVAL;
}
str += len;
if (*str != ':')
break;
str++;
}
return rc ? : features;
}
/*
* Try to match the first element on the comma separated parse string
* with one of the known keywords. If a keyword is found, take the approprate
* action and return a pointer to the residual string. If the first element
* could not be matched to any keyword then return an error code.
*/
static int __init dasd_parse_keyword(char *keyword)
{
int length = strlen(keyword);
if (strncmp("autodetect", keyword, length) == 0) {
dasd_autodetect = 1;
pr_info("The autodetection mode has been activated\n");
return 0;
}
if (strncmp("probeonly", keyword, length) == 0) {
dasd_probeonly = 1;
pr_info("The probeonly mode has been activated\n");
return 0;
}
if (strncmp("nopav", keyword, length) == 0) {
if (MACHINE_IS_VM)
pr_info("'nopav' is not supported on z/VM\n");
else {
dasd_nopav = 1;
pr_info("PAV support has be deactivated\n");
}
return 0;
}
if (strncmp("nofcx", keyword, length) == 0) {
dasd_nofcx = 1;
pr_info("High Performance FICON support has been "
"deactivated\n");
return 0;
}
if (strncmp("fixedbuffers", keyword, length) == 0) {
if (dasd_page_cache)
return 0;
dasd_page_cache =
kmem_cache_create("dasd_page_cache", PAGE_SIZE,
PAGE_SIZE, SLAB_CACHE_DMA,
NULL);
if (!dasd_page_cache)
DBF_EVENT(DBF_WARNING, "%s", "Failed to create slab, "
"fixed buffer mode disabled.");
else
DBF_EVENT(DBF_INFO, "%s",
"turning on fixed buffer mode");
return 0;
}
return -EINVAL;
}
/*
* Split a string of a device range into its pieces and return the from, to, and
* feature parts separately.
* e.g.:
* 0.0.1234-0.0.5678(ro:erplog) -> from: 0.0.1234 to: 0.0.5678 features: ro:erplog
* 0.0.8765(raw) -> from: 0.0.8765 to: null features: raw
* 0x4321 -> from: 0x4321 to: null features: null
*/
static int __init dasd_evaluate_range_param(char *range, char **from_str,
char **to_str, char **features_str)
{
int rc = 0;
/* Do we have a range or a single device? */
if (strchr(range, '-')) {
*from_str = strsep(&range, "-");
*to_str = strsep(&range, "(");
*features_str = strsep(&range, ")");
} else {
*from_str = strsep(&range, "(");
*features_str = strsep(&range, ")");
}
if (*features_str && !range) {
pr_warn("A closing parenthesis ')' is missing in the dasd= parameter\n");
rc = -EINVAL;
}
return rc;
}
/*
* Try to interprete the range string as a device number or a range of devices.
* If the interpretation is successful, create the matching dasd_devmap entries.
* If interpretation fails or in case of an error, return an error code.
*/
static int __init dasd_parse_range(const char *range)
{
struct dasd_devmap *devmap;
int from, from_id0, from_id1;
int to, to_id0, to_id1;
int features;
char bus_id[DASD_BUS_ID_SIZE + 1];
char *features_str = NULL;
char *from_str = NULL;
char *to_str = NULL;
int rc = 0;
char *tmp;
tmp = kstrdup(range, GFP_KERNEL);
if (!tmp)
return -ENOMEM;
if (dasd_evaluate_range_param(tmp, &from_str, &to_str, &features_str)) {
rc = -EINVAL;
goto out;
}
if (dasd_busid(from_str, &from_id0, &from_id1, &from)) {
rc = -EINVAL;
goto out;
}
to = from;
to_id0 = from_id0;
to_id1 = from_id1;
if (to_str) {
if (dasd_busid(to_str, &to_id0, &to_id1, &to)) {
rc = -EINVAL;
goto out;
}
if (from_id0 != to_id0 || from_id1 != to_id1 || from > to) {
pr_err("%s is not a valid device range\n", range);
rc = -EINVAL;
goto out;
}
}
features = dasd_feature_list(features_str);
if (features < 0) {
rc = -EINVAL;
goto out;
}
/* each device in dasd= parameter should be set initially online */
features |= DASD_FEATURE_INITIAL_ONLINE;
while (from <= to) {
sprintf(bus_id, "%01x.%01x.%04x", from_id0, from_id1, from++);
devmap = dasd_add_busid(bus_id, features);
if (IS_ERR(devmap)) {
rc = PTR_ERR(devmap);
goto out;
}
}
out:
kfree(tmp);
return rc;
}
/*
* Parse parameters stored in dasd[]
* The 'dasd=...' parameter allows to specify a comma separated list of
* keywords and device ranges. The parameters in that list will be stored as
* separate elementes in dasd[].
*/
int __init dasd_parse(void)
{
int rc, i;
char *cur;
rc = 0;
for (i = 0; i < DASD_MAX_PARAMS; i++) {
cur = dasd[i];
if (!cur)
break;
if (*cur == '\0')
continue;
rc = dasd_parse_keyword(cur);
if (rc)
rc = dasd_parse_range(cur);
if (rc)
break;
}
return rc;
}
/*
* Add a devmap for the device specified by busid. It is possible that
* the devmap already exists (dasd= parameter). The order of the devices
* added through this function will define the kdevs for the individual
* devices.
*/
static struct dasd_devmap *
dasd_add_busid(const char *bus_id, int features)
{
struct dasd_devmap *devmap, *new, *tmp;
int hash;
new = kzalloc(sizeof(struct dasd_devmap), GFP_KERNEL);
if (!new)
return ERR_PTR(-ENOMEM);
spin_lock(&dasd_devmap_lock);
devmap = NULL;
hash = dasd_hash_busid(bus_id);
list_for_each_entry(tmp, &dasd_hashlists[hash], list)
if (strncmp(tmp->bus_id, bus_id, DASD_BUS_ID_SIZE) == 0) {
devmap = tmp;
break;
}
if (!devmap) {
/* This bus_id is new. */
new->devindex = dasd_max_devindex++;
strncpy(new->bus_id, bus_id, DASD_BUS_ID_SIZE);
new->features = features;
new->device = NULL;
list_add(&new->list, &dasd_hashlists[hash]);
devmap = new;
new = NULL;
}
spin_unlock(&dasd_devmap_lock);
kfree(new);
return devmap;
}
/*
* Find devmap for device with given bus_id.
*/
static struct dasd_devmap *
dasd_find_busid(const char *bus_id)
{
struct dasd_devmap *devmap, *tmp;
int hash;
spin_lock(&dasd_devmap_lock);
devmap = ERR_PTR(-ENODEV);
hash = dasd_hash_busid(bus_id);
list_for_each_entry(tmp, &dasd_hashlists[hash], list) {
if (strncmp(tmp->bus_id, bus_id, DASD_BUS_ID_SIZE) == 0) {
devmap = tmp;
break;
}
}
spin_unlock(&dasd_devmap_lock);
return devmap;
}
/*
* Check if busid has been added to the list of dasd ranges.
*/
int
dasd_busid_known(const char *bus_id)
{
return IS_ERR(dasd_find_busid(bus_id)) ? -ENOENT : 0;
}
/*
* Forget all about the device numbers added so far.
* This may only be called at module unload or system shutdown.
*/
static void
dasd_forget_ranges(void)
{
struct dasd_devmap *devmap, *n;
int i;
spin_lock(&dasd_devmap_lock);
for (i = 0; i < 256; i++) {
list_for_each_entry_safe(devmap, n, &dasd_hashlists[i], list) {
BUG_ON(devmap->device != NULL);
list_del(&devmap->list);
kfree(devmap);
}
}
spin_unlock(&dasd_devmap_lock);
}
/*
* Find the device struct by its device index.
*/
struct dasd_device *
dasd_device_from_devindex(int devindex)
{
struct dasd_devmap *devmap, *tmp;
struct dasd_device *device;
int i;
spin_lock(&dasd_devmap_lock);
devmap = NULL;
for (i = 0; (i < 256) && !devmap; i++)
list_for_each_entry(tmp, &dasd_hashlists[i], list)
if (tmp->devindex == devindex) {
/* Found the devmap for the device. */
devmap = tmp;
break;
}
if (devmap && devmap->device) {
device = devmap->device;
dasd_get_device(device);
} else
device = ERR_PTR(-ENODEV);
spin_unlock(&dasd_devmap_lock);
return device;
}
/*
* Return devmap for cdev. If no devmap exists yet, create one and
* connect it to the cdev.
*/
static struct dasd_devmap *
dasd_devmap_from_cdev(struct ccw_device *cdev)
{
struct dasd_devmap *devmap;
devmap = dasd_find_busid(dev_name(&cdev->dev));
if (IS_ERR(devmap))
devmap = dasd_add_busid(dev_name(&cdev->dev),
DASD_FEATURE_DEFAULT);
return devmap;
}
/*
* Create a dasd device structure for cdev.
*/
struct dasd_device *
dasd_create_device(struct ccw_device *cdev)
{
struct dasd_devmap *devmap;
struct dasd_device *device;
unsigned long flags;
int rc;
devmap = dasd_devmap_from_cdev(cdev);
if (IS_ERR(devmap))
return (void *) devmap;
device = dasd_alloc_device();
if (IS_ERR(device))
return device;
atomic_set(&device->ref_count, 3);
spin_lock(&dasd_devmap_lock);
if (!devmap->device) {
devmap->device = device;
device->devindex = devmap->devindex;
device->features = devmap->features;
get_device(&cdev->dev);
device->cdev = cdev;
rc = 0;
} else
/* Someone else was faster. */
rc = -EBUSY;
spin_unlock(&dasd_devmap_lock);
if (rc) {
dasd_free_device(device);
return ERR_PTR(rc);
}
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
dev_set_drvdata(&cdev->dev, device);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
return device;
}
/*
* Wait queue for dasd_delete_device waits.
*/
static DECLARE_WAIT_QUEUE_HEAD(dasd_delete_wq);
/*
* Remove a dasd device structure. The passed referenced
* is destroyed.
*/
void
dasd_delete_device(struct dasd_device *device)
{
struct ccw_device *cdev;
struct dasd_devmap *devmap;
unsigned long flags;
/* First remove device pointer from devmap. */
devmap = dasd_find_busid(dev_name(&device->cdev->dev));
BUG_ON(IS_ERR(devmap));
spin_lock(&dasd_devmap_lock);
if (devmap->device != device) {
spin_unlock(&dasd_devmap_lock);
dasd_put_device(device);
return;
}
devmap->device = NULL;
spin_unlock(&dasd_devmap_lock);
/* Disconnect dasd_device structure from ccw_device structure. */
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
dev_set_drvdata(&device->cdev->dev, NULL);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
/*
* Drop ref_count by 3, one for the devmap reference, one for
* the cdev reference and one for the passed reference.
*/
atomic_sub(3, &device->ref_count);
/* Wait for reference counter to drop to zero. */
wait_event(dasd_delete_wq, atomic_read(&device->ref_count) == 0);
dasd_generic_free_discipline(device);
/* Disconnect dasd_device structure from ccw_device structure. */
cdev = device->cdev;
device->cdev = NULL;
/* Put ccw_device structure. */
put_device(&cdev->dev);
/* Now the device structure can be freed. */
dasd_free_device(device);
}
/*
* Reference counter dropped to zero. Wake up waiter
* in dasd_delete_device.
*/
void
dasd_put_device_wake(struct dasd_device *device)
{
wake_up(&dasd_delete_wq);
}
EXPORT_SYMBOL_GPL(dasd_put_device_wake);
/*
* Return dasd_device structure associated with cdev.
* This function needs to be called with the ccw device
* lock held. It can be used from interrupt context.
*/
struct dasd_device *
dasd_device_from_cdev_locked(struct ccw_device *cdev)
{
struct dasd_device *device = dev_get_drvdata(&cdev->dev);
if (!device)
return ERR_PTR(-ENODEV);
dasd_get_device(device);
return device;
}
/*
* Return dasd_device structure associated with cdev.
*/
struct dasd_device *
dasd_device_from_cdev(struct ccw_device *cdev)
{
struct dasd_device *device;
unsigned long flags;
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
device = dasd_device_from_cdev_locked(cdev);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
return device;
}
void dasd_add_link_to_gendisk(struct gendisk *gdp, struct dasd_device *device)
{
struct dasd_devmap *devmap;
devmap = dasd_find_busid(dev_name(&device->cdev->dev));
if (IS_ERR(devmap))
return;
spin_lock(&dasd_devmap_lock);
gdp->private_data = devmap;
spin_unlock(&dasd_devmap_lock);
}
struct dasd_device *dasd_device_from_gendisk(struct gendisk *gdp)
{
struct dasd_device *device;
struct dasd_devmap *devmap;
if (!gdp->private_data)
return NULL;
device = NULL;
spin_lock(&dasd_devmap_lock);
devmap = gdp->private_data;
if (devmap && devmap->device) {
device = devmap->device;
dasd_get_device(device);
}
spin_unlock(&dasd_devmap_lock);
return device;
}
/*
* SECTION: files in sysfs
*/
/*
* failfast controls the behaviour, if no path is available
*/
static ssize_t dasd_ff_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct dasd_devmap *devmap;
int ff_flag;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap))
ff_flag = (devmap->features & DASD_FEATURE_FAILFAST) != 0;
else
ff_flag = (DASD_FEATURE_DEFAULT & DASD_FEATURE_FAILFAST) != 0;
return snprintf(buf, PAGE_SIZE, ff_flag ? "1\n" : "0\n");
}
static ssize_t dasd_ff_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned int val;
int rc;
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
rc = dasd_set_feature(to_ccwdev(dev), DASD_FEATURE_FAILFAST, val);
return rc ? : count;
}
static DEVICE_ATTR(failfast, 0644, dasd_ff_show, dasd_ff_store);
/*
* readonly controls the readonly status of a dasd
*/
static ssize_t
dasd_ro_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
struct dasd_device *device;
int ro_flag = 0;
devmap = dasd_find_busid(dev_name(dev));
if (IS_ERR(devmap))
goto out;
ro_flag = !!(devmap->features & DASD_FEATURE_READONLY);
spin_lock(&dasd_devmap_lock);
device = devmap->device;
if (device)
ro_flag |= test_bit(DASD_FLAG_DEVICE_RO, &device->flags);
spin_unlock(&dasd_devmap_lock);
out:
return snprintf(buf, PAGE_SIZE, ro_flag ? "1\n" : "0\n");
}
static ssize_t
dasd_ro_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct dasd_device *device;
unsigned long flags;
unsigned int val;
int rc;
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
rc = dasd_set_feature(cdev, DASD_FEATURE_READONLY, val);
if (rc)
return rc;
device = dasd_device_from_cdev(cdev);
if (IS_ERR(device))
return count;
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
val = val || test_bit(DASD_FLAG_DEVICE_RO, &device->flags);
if (!device->block || !device->block->gdp ||
test_bit(DASD_FLAG_OFFLINE, &device->flags)) {
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
goto out;
}
/* Increase open_count to avoid losing the block device */
atomic_inc(&device->block->open_count);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
set_disk_ro(device->block->gdp, val);
atomic_dec(&device->block->open_count);
out:
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(readonly, 0644, dasd_ro_show, dasd_ro_store);
/*
* erplog controls the logging of ERP related data
* (e.g. failing channel programs).
*/
static ssize_t
dasd_erplog_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
int erplog;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap))
erplog = (devmap->features & DASD_FEATURE_ERPLOG) != 0;
else
erplog = (DASD_FEATURE_DEFAULT & DASD_FEATURE_ERPLOG) != 0;
return snprintf(buf, PAGE_SIZE, erplog ? "1\n" : "0\n");
}
static ssize_t
dasd_erplog_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned int val;
int rc;
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
rc = dasd_set_feature(to_ccwdev(dev), DASD_FEATURE_ERPLOG, val);
return rc ? : count;
}
static DEVICE_ATTR(erplog, 0644, dasd_erplog_show, dasd_erplog_store);
/*
* use_diag controls whether the driver should use diag rather than ssch
* to talk to the device
*/
static ssize_t
dasd_use_diag_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
int use_diag;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap))
use_diag = (devmap->features & DASD_FEATURE_USEDIAG) != 0;
else
use_diag = (DASD_FEATURE_DEFAULT & DASD_FEATURE_USEDIAG) != 0;
return sprintf(buf, use_diag ? "1\n" : "0\n");
}
static ssize_t
dasd_use_diag_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_devmap *devmap;
unsigned int val;
ssize_t rc;
devmap = dasd_devmap_from_cdev(to_ccwdev(dev));
if (IS_ERR(devmap))
return PTR_ERR(devmap);
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
spin_lock(&dasd_devmap_lock);
/* Changing diag discipline flag is only allowed in offline state. */
rc = count;
if (!devmap->device && !(devmap->features & DASD_FEATURE_USERAW)) {
if (val)
devmap->features |= DASD_FEATURE_USEDIAG;
else
devmap->features &= ~DASD_FEATURE_USEDIAG;
} else
rc = -EPERM;
spin_unlock(&dasd_devmap_lock);
return rc;
}
static DEVICE_ATTR(use_diag, 0644, dasd_use_diag_show, dasd_use_diag_store);
/*
* use_raw controls whether the driver should give access to raw eckd data or
* operate in standard mode
*/
static ssize_t
dasd_use_raw_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
int use_raw;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap))
use_raw = (devmap->features & DASD_FEATURE_USERAW) != 0;
else
use_raw = (DASD_FEATURE_DEFAULT & DASD_FEATURE_USERAW) != 0;
return sprintf(buf, use_raw ? "1\n" : "0\n");
}
static ssize_t
dasd_use_raw_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_devmap *devmap;
ssize_t rc;
unsigned long val;
devmap = dasd_devmap_from_cdev(to_ccwdev(dev));
if (IS_ERR(devmap))
return PTR_ERR(devmap);
if ((kstrtoul(buf, 10, &val) != 0) || val > 1)
return -EINVAL;
spin_lock(&dasd_devmap_lock);
/* Changing diag discipline flag is only allowed in offline state. */
rc = count;
if (!devmap->device && !(devmap->features & DASD_FEATURE_USEDIAG)) {
if (val)
devmap->features |= DASD_FEATURE_USERAW;
else
devmap->features &= ~DASD_FEATURE_USERAW;
} else
rc = -EPERM;
spin_unlock(&dasd_devmap_lock);
return rc;
}
static DEVICE_ATTR(raw_track_access, 0644, dasd_use_raw_show,
dasd_use_raw_store);
static ssize_t
dasd_safe_offline_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct dasd_device *device;
s390/dasd: fix unusable device after safe offline processing The safe offline processing needs, as well as the normal offline processing, to be locked against multiple parallel executions. But it should be able to be overtaken by a normal offline processing to make sure that the device does not wait forever for outstanding I/O if the user wants to. Unfortunately the parallel processing of safe offline and normal offline might lead to a race situation where both threads report successful execution to the CIO layer which in turn tries to deregister the kobject of the device twice. This leads to a refcount_t: underflow; use-after-free. error and the device is not able to be set online again afterwards without a reboot. Correct the locking of the safe offline processing by doing the following: - Use the cdev lock to secure all set and test operations to the device flags. - Two safe offline processes are locked against each other using the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING device flags. The differentiation between offline triggered and offline running is needed since the normal offline attribute is owned by CIO and we have to pass over control in between. - The dasd_generic_set_offline process handles the offline processing. It is locked against parallel execution using the DASD_FLAG_OFFLINE. - Only a running safe offline should be able to be overtaken by a single normal offline. This is ensured by clearing the DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline overtakes. So this can only happen ones. - The safe offline just aborts in this case doing nothing and the normal offline processing finishes as usual. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-16 16:30:13 +08:00
unsigned long flags;
int rc;
s390/dasd: fix unusable device after safe offline processing The safe offline processing needs, as well as the normal offline processing, to be locked against multiple parallel executions. But it should be able to be overtaken by a normal offline processing to make sure that the device does not wait forever for outstanding I/O if the user wants to. Unfortunately the parallel processing of safe offline and normal offline might lead to a race situation where both threads report successful execution to the CIO layer which in turn tries to deregister the kobject of the device twice. This leads to a refcount_t: underflow; use-after-free. error and the device is not able to be set online again afterwards without a reboot. Correct the locking of the safe offline processing by doing the following: - Use the cdev lock to secure all set and test operations to the device flags. - Two safe offline processes are locked against each other using the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING device flags. The differentiation between offline triggered and offline running is needed since the normal offline attribute is owned by CIO and we have to pass over control in between. - The dasd_generic_set_offline process handles the offline processing. It is locked against parallel execution using the DASD_FLAG_OFFLINE. - Only a running safe offline should be able to be overtaken by a single normal offline. This is ensured by clearing the DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline overtakes. So this can only happen ones. - The safe offline just aborts in this case doing nothing and the normal offline processing finishes as usual. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-16 16:30:13 +08:00
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
device = dasd_device_from_cdev_locked(cdev);
if (IS_ERR(device)) {
rc = PTR_ERR(device);
s390/dasd: fix unusable device after safe offline processing The safe offline processing needs, as well as the normal offline processing, to be locked against multiple parallel executions. But it should be able to be overtaken by a normal offline processing to make sure that the device does not wait forever for outstanding I/O if the user wants to. Unfortunately the parallel processing of safe offline and normal offline might lead to a race situation where both threads report successful execution to the CIO layer which in turn tries to deregister the kobject of the device twice. This leads to a refcount_t: underflow; use-after-free. error and the device is not able to be set online again afterwards without a reboot. Correct the locking of the safe offline processing by doing the following: - Use the cdev lock to secure all set and test operations to the device flags. - Two safe offline processes are locked against each other using the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING device flags. The differentiation between offline triggered and offline running is needed since the normal offline attribute is owned by CIO and we have to pass over control in between. - The dasd_generic_set_offline process handles the offline processing. It is locked against parallel execution using the DASD_FLAG_OFFLINE. - Only a running safe offline should be able to be overtaken by a single normal offline. This is ensured by clearing the DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline overtakes. So this can only happen ones. - The safe offline just aborts in this case doing nothing and the normal offline processing finishes as usual. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-16 16:30:13 +08:00
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
goto out;
}
if (test_bit(DASD_FLAG_OFFLINE, &device->flags) ||
test_bit(DASD_FLAG_SAFE_OFFLINE_RUNNING, &device->flags)) {
/* Already doing offline processing */
dasd_put_device(device);
s390/dasd: fix unusable device after safe offline processing The safe offline processing needs, as well as the normal offline processing, to be locked against multiple parallel executions. But it should be able to be overtaken by a normal offline processing to make sure that the device does not wait forever for outstanding I/O if the user wants to. Unfortunately the parallel processing of safe offline and normal offline might lead to a race situation where both threads report successful execution to the CIO layer which in turn tries to deregister the kobject of the device twice. This leads to a refcount_t: underflow; use-after-free. error and the device is not able to be set online again afterwards without a reboot. Correct the locking of the safe offline processing by doing the following: - Use the cdev lock to secure all set and test operations to the device flags. - Two safe offline processes are locked against each other using the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING device flags. The differentiation between offline triggered and offline running is needed since the normal offline attribute is owned by CIO and we have to pass over control in between. - The dasd_generic_set_offline process handles the offline processing. It is locked against parallel execution using the DASD_FLAG_OFFLINE. - Only a running safe offline should be able to be overtaken by a single normal offline. This is ensured by clearing the DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline overtakes. So this can only happen ones. - The safe offline just aborts in this case doing nothing and the normal offline processing finishes as usual. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-16 16:30:13 +08:00
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
rc = -EBUSY;
goto out;
}
set_bit(DASD_FLAG_SAFE_OFFLINE, &device->flags);
dasd_put_device(device);
s390/dasd: fix unusable device after safe offline processing The safe offline processing needs, as well as the normal offline processing, to be locked against multiple parallel executions. But it should be able to be overtaken by a normal offline processing to make sure that the device does not wait forever for outstanding I/O if the user wants to. Unfortunately the parallel processing of safe offline and normal offline might lead to a race situation where both threads report successful execution to the CIO layer which in turn tries to deregister the kobject of the device twice. This leads to a refcount_t: underflow; use-after-free. error and the device is not able to be set online again afterwards without a reboot. Correct the locking of the safe offline processing by doing the following: - Use the cdev lock to secure all set and test operations to the device flags. - Two safe offline processes are locked against each other using the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING device flags. The differentiation between offline triggered and offline running is needed since the normal offline attribute is owned by CIO and we have to pass over control in between. - The dasd_generic_set_offline process handles the offline processing. It is locked against parallel execution using the DASD_FLAG_OFFLINE. - Only a running safe offline should be able to be overtaken by a single normal offline. This is ensured by clearing the DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline overtakes. So this can only happen ones. - The safe offline just aborts in this case doing nothing and the normal offline processing finishes as usual. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-16 16:30:13 +08:00
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
rc = ccw_device_set_offline(cdev);
out:
return rc ? rc : count;
}
static DEVICE_ATTR(safe_offline, 0200, NULL, dasd_safe_offline_store);
static ssize_t
dasd_access_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ccw_device *cdev = to_ccwdev(dev);
struct dasd_device *device;
int count;
device = dasd_device_from_cdev(cdev);
if (IS_ERR(device))
return PTR_ERR(device);
if (!device->discipline)
count = -ENODEV;
else if (!device->discipline->host_access_count)
count = -EOPNOTSUPP;
else
count = device->discipline->host_access_count(device);
dasd_put_device(device);
if (count < 0)
return count;
return sprintf(buf, "%d\n", count);
}
static DEVICE_ATTR(host_access_count, 0444, dasd_access_show, NULL);
static ssize_t
dasd_discipline_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct dasd_device *device;
ssize_t len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
goto out;
else if (!device->discipline) {
dasd_put_device(device);
goto out;
} else {
len = snprintf(buf, PAGE_SIZE, "%s\n",
device->discipline->name);
dasd_put_device(device);
return len;
}
out:
len = snprintf(buf, PAGE_SIZE, "none\n");
return len;
}
static DEVICE_ATTR(discipline, 0444, dasd_discipline_show, NULL);
static ssize_t
dasd_device_status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct dasd_device *device;
ssize_t len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (!IS_ERR(device)) {
switch (device->state) {
case DASD_STATE_NEW:
len = snprintf(buf, PAGE_SIZE, "new\n");
break;
case DASD_STATE_KNOWN:
len = snprintf(buf, PAGE_SIZE, "detected\n");
break;
case DASD_STATE_BASIC:
len = snprintf(buf, PAGE_SIZE, "basic\n");
break;
case DASD_STATE_UNFMT:
len = snprintf(buf, PAGE_SIZE, "unformatted\n");
break;
case DASD_STATE_READY:
len = snprintf(buf, PAGE_SIZE, "ready\n");
break;
case DASD_STATE_ONLINE:
len = snprintf(buf, PAGE_SIZE, "online\n");
break;
default:
len = snprintf(buf, PAGE_SIZE, "no stat\n");
break;
}
dasd_put_device(device);
} else
len = snprintf(buf, PAGE_SIZE, "unknown\n");
return len;
}
static DEVICE_ATTR(status, 0444, dasd_device_status_show, NULL);
static ssize_t dasd_alias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
struct dasd_uid uid;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
return sprintf(buf, "0\n");
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid)) {
if (uid.type == UA_BASE_PAV_ALIAS ||
uid.type == UA_HYPER_PAV_ALIAS) {
dasd_put_device(device);
return sprintf(buf, "1\n");
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
}
dasd_put_device(device);
return sprintf(buf, "0\n");
}
static DEVICE_ATTR(alias, 0444, dasd_alias_show, NULL);
static ssize_t dasd_vendor_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
struct dasd_uid uid;
char *vendor;
device = dasd_device_from_cdev(to_ccwdev(dev));
vendor = "";
if (IS_ERR(device))
return snprintf(buf, PAGE_SIZE, "%s\n", vendor);
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid))
vendor = uid.vendor;
dasd_put_device(device);
return snprintf(buf, PAGE_SIZE, "%s\n", vendor);
}
static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\
/* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\
/* vduit */ 32 + 1)
static ssize_t
dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
struct dasd_uid uid;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
char uid_string[UID_STRLEN];
char ua_string[3];
device = dasd_device_from_cdev(to_ccwdev(dev));
uid_string[0] = 0;
if (IS_ERR(device))
return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid)) {
switch (uid.type) {
case UA_BASE_DEVICE:
snprintf(ua_string, sizeof(ua_string), "%02x",
uid.real_unit_addr);
break;
case UA_BASE_PAV_ALIAS:
snprintf(ua_string, sizeof(ua_string), "%02x",
uid.base_unit_addr);
break;
case UA_HYPER_PAV_ALIAS:
snprintf(ua_string, sizeof(ua_string), "xx");
break;
default:
/* should not happen, treat like base device */
snprintf(ua_string, sizeof(ua_string), "%02x",
uid.real_unit_addr);
break;
}
if (strlen(uid.vduit) > 0)
snprintf(uid_string, sizeof(uid_string),
"%s.%s.%04x.%s.%s",
uid.vendor, uid.serial, uid.ssid, ua_string,
uid.vduit);
else
snprintf(uid_string, sizeof(uid_string),
"%s.%s.%04x.%s",
uid.vendor, uid.serial, uid.ssid, ua_string);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
}
dasd_put_device(device);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:11:23 +08:00
return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
}
static DEVICE_ATTR(uid, 0444, dasd_uid_show, NULL);
/*
* extended error-reporting
*/
static ssize_t
dasd_eer_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
int eer_flag;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap) && devmap->device)
eer_flag = dasd_eer_enabled(devmap->device);
else
eer_flag = 0;
return snprintf(buf, PAGE_SIZE, eer_flag ? "1\n" : "0\n");
}
static ssize_t
dasd_eer_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned int val;
int rc = 0;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return PTR_ERR(device);
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
if (val)
rc = dasd_eer_enable(device);
else
dasd_eer_disable(device);
dasd_put_device(device);
return rc ? : count;
}
static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
/*
* expiration time for default requests
*/
static ssize_t
dasd_expires_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
int len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
len = snprintf(buf, PAGE_SIZE, "%lu\n", device->default_expires);
dasd_put_device(device);
return len;
}
static ssize_t
dasd_expires_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned long val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if ((kstrtoul(buf, 10, &val) != 0) ||
(val > DASD_EXPIRES_MAX) || val == 0) {
dasd_put_device(device);
return -EINVAL;
}
if (val)
device->default_expires = val;
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(expires, 0644, dasd_expires_show, dasd_expires_store);
static ssize_t
dasd_retries_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
int len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
len = snprintf(buf, PAGE_SIZE, "%lu\n", device->default_retries);
dasd_put_device(device);
return len;
}
static ssize_t
dasd_retries_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned long val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if ((kstrtoul(buf, 10, &val) != 0) ||
(val > DASD_RETRIES_MAX)) {
dasd_put_device(device);
return -EINVAL;
}
if (val)
device->default_retries = val;
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(retries, 0644, dasd_retries_show, dasd_retries_store);
static ssize_t
dasd_timeout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct dasd_device *device;
int len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
len = snprintf(buf, PAGE_SIZE, "%lu\n", device->blk_timeout);
dasd_put_device(device);
return len;
}
static ssize_t
dasd_timeout_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
struct request_queue *q;
unsigned long val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device) || !device->block)
return -ENODEV;
if ((kstrtoul(buf, 10, &val) != 0) ||
val > UINT_MAX / HZ) {
dasd_put_device(device);
return -EINVAL;
}
q = device->block->request_queue;
if (!q) {
dasd_put_device(device);
return -ENODEV;
}
device->blk_timeout = val;
blk_queue_rq_timeout(q, device->blk_timeout * HZ);
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(timeout, 0644,
dasd_timeout_show, dasd_timeout_store);
static ssize_t
dasd_path_reset_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned int val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if ((kstrtouint(buf, 16, &val) != 0) || val > 0xff)
val = 0;
if (device->discipline && device->discipline->reset_path)
device->discipline->reset_path(device, (__u8) val);
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(path_reset, 0200, NULL, dasd_path_reset_store);
static ssize_t dasd_hpf_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct dasd_device *device;
int hpf;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if (!device->discipline || !device->discipline->hpf_enabled) {
dasd_put_device(device);
return snprintf(buf, PAGE_SIZE, "%d\n", dasd_nofcx);
}
hpf = device->discipline->hpf_enabled(device);
dasd_put_device(device);
return snprintf(buf, PAGE_SIZE, "%d\n", hpf);
}
static DEVICE_ATTR(hpf, 0444, dasd_hpf_show, NULL);
static ssize_t dasd_reservation_policy_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct dasd_devmap *devmap;
int rc = 0;
devmap = dasd_find_busid(dev_name(dev));
if (IS_ERR(devmap)) {
rc = snprintf(buf, PAGE_SIZE, "ignore\n");
} else {
spin_lock(&dasd_devmap_lock);
if (devmap->features & DASD_FEATURE_FAILONSLCK)
rc = snprintf(buf, PAGE_SIZE, "fail\n");
else
rc = snprintf(buf, PAGE_SIZE, "ignore\n");
spin_unlock(&dasd_devmap_lock);
}
return rc;
}
static ssize_t dasd_reservation_policy_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ccw_device *cdev = to_ccwdev(dev);
int rc;
if (sysfs_streq("ignore", buf))
rc = dasd_set_feature(cdev, DASD_FEATURE_FAILONSLCK, 0);
else if (sysfs_streq("fail", buf))
rc = dasd_set_feature(cdev, DASD_FEATURE_FAILONSLCK, 1);
else
rc = -EINVAL;
return rc ? : count;
}
static DEVICE_ATTR(reservation_policy, 0644,
dasd_reservation_policy_show, dasd_reservation_policy_store);
static ssize_t dasd_reservation_state_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct dasd_device *device;
int rc = 0;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return snprintf(buf, PAGE_SIZE, "none\n");
if (test_bit(DASD_FLAG_IS_RESERVED, &device->flags))
rc = snprintf(buf, PAGE_SIZE, "reserved\n");
else if (test_bit(DASD_FLAG_LOCK_STOLEN, &device->flags))
rc = snprintf(buf, PAGE_SIZE, "lost\n");
else
rc = snprintf(buf, PAGE_SIZE, "none\n");
dasd_put_device(device);
return rc;
}
static ssize_t dasd_reservation_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
int rc = 0;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if (sysfs_streq("reset", buf))
clear_bit(DASD_FLAG_LOCK_STOLEN, &device->flags);
else
rc = -EINVAL;
dasd_put_device(device);
if (rc)
return rc;
else
return count;
}
static DEVICE_ATTR(last_known_reservation_state, 0644,
dasd_reservation_state_show, dasd_reservation_state_store);
static ssize_t dasd_pm_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
u8 opm, nppm, cablepm, cuirpm, hpfpm, ifccpm;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return sprintf(buf, "0\n");
opm = dasd_path_get_opm(device);
nppm = dasd_path_get_nppm(device);
cablepm = dasd_path_get_cablepm(device);
cuirpm = dasd_path_get_cuirpm(device);
hpfpm = dasd_path_get_hpfpm(device);
ifccpm = dasd_path_get_ifccpm(device);
dasd_put_device(device);
return sprintf(buf, "%02x %02x %02x %02x %02x %02x\n", opm, nppm,
cablepm, cuirpm, hpfpm, ifccpm);
}
static DEVICE_ATTR(path_masks, 0444, dasd_pm_show, NULL);
/*
* threshold value for IFCC/CCC errors
*/
static ssize_t
dasd_path_threshold_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
int len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
len = snprintf(buf, PAGE_SIZE, "%lu\n", device->path_thrhld);
dasd_put_device(device);
return len;
}
static ssize_t
dasd_path_threshold_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned long flags;
unsigned long val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if (kstrtoul(buf, 10, &val) != 0 || val > DASD_THRHLD_MAX) {
dasd_put_device(device);
return -EINVAL;
}
spin_lock_irqsave(get_ccwdev_lock(to_ccwdev(dev)), flags);
device->path_thrhld = val;
spin_unlock_irqrestore(get_ccwdev_lock(to_ccwdev(dev)), flags);
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(path_threshold, 0644, dasd_path_threshold_show,
dasd_path_threshold_store);
/*
* configure if path is disabled after IFCC/CCC error threshold is
* exceeded
*/
static ssize_t
dasd_path_autodisable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_devmap *devmap;
int flag;
devmap = dasd_find_busid(dev_name(dev));
if (!IS_ERR(devmap))
flag = (devmap->features & DASD_FEATURE_PATH_AUTODISABLE) != 0;
else
flag = (DASD_FEATURE_DEFAULT &
DASD_FEATURE_PATH_AUTODISABLE) != 0;
return snprintf(buf, PAGE_SIZE, flag ? "1\n" : "0\n");
}
static ssize_t
dasd_path_autodisable_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned int val;
int rc;
if (kstrtouint(buf, 0, &val) || val > 1)
return -EINVAL;
rc = dasd_set_feature(to_ccwdev(dev),
DASD_FEATURE_PATH_AUTODISABLE, val);
return rc ? : count;
}
static DEVICE_ATTR(path_autodisable, 0644,
dasd_path_autodisable_show,
dasd_path_autodisable_store);
/*
* interval for IFCC/CCC checks
* meaning time with no IFCC/CCC error before the error counter
* gets reset
*/
static ssize_t
dasd_path_interval_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dasd_device *device;
int len;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
len = snprintf(buf, PAGE_SIZE, "%lu\n", device->path_interval);
dasd_put_device(device);
return len;
}
static ssize_t
dasd_path_interval_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct dasd_device *device;
unsigned long flags;
unsigned long val;
device = dasd_device_from_cdev(to_ccwdev(dev));
if (IS_ERR(device))
return -ENODEV;
if ((kstrtoul(buf, 10, &val) != 0) ||
(val > DASD_INTERVAL_MAX) || val == 0) {
dasd_put_device(device);
return -EINVAL;
}
spin_lock_irqsave(get_ccwdev_lock(to_ccwdev(dev)), flags);
if (val)
device->path_interval = val;
spin_unlock_irqrestore(get_ccwdev_lock(to_ccwdev(dev)), flags);
dasd_put_device(device);
return count;
}
static DEVICE_ATTR(path_interval, 0644, dasd_path_interval_show,
dasd_path_interval_store);
static struct attribute * dasd_attrs[] = {
&dev_attr_readonly.attr,
&dev_attr_discipline.attr,
&dev_attr_status.attr,
&dev_attr_alias.attr,
&dev_attr_vendor.attr,
&dev_attr_uid.attr,
&dev_attr_use_diag.attr,
&dev_attr_raw_track_access.attr,
&dev_attr_eer_enabled.attr,
&dev_attr_erplog.attr,
&dev_attr_failfast.attr,
&dev_attr_expires.attr,
&dev_attr_retries.attr,
&dev_attr_timeout.attr,
&dev_attr_reservation_policy.attr,
&dev_attr_last_known_reservation_state.attr,
&dev_attr_safe_offline.attr,
&dev_attr_host_access_count.attr,
&dev_attr_path_masks.attr,
&dev_attr_path_threshold.attr,
&dev_attr_path_autodisable.attr,
&dev_attr_path_interval.attr,
&dev_attr_path_reset.attr,
&dev_attr_hpf.attr,
NULL,
};
static const struct attribute_group dasd_attr_group = {
.attrs = dasd_attrs,
};
/*
* Return value of the specified feature.
*/
int
dasd_get_feature(struct ccw_device *cdev, int feature)
{
struct dasd_devmap *devmap;
devmap = dasd_find_busid(dev_name(&cdev->dev));
if (IS_ERR(devmap))
return PTR_ERR(devmap);
return ((devmap->features & feature) != 0);
}
/*
* Set / reset given feature.
* Flag indicates whether to set (!=0) or the reset (=0) the feature.
*/
int
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
{
struct dasd_devmap *devmap;
devmap = dasd_devmap_from_cdev(cdev);
if (IS_ERR(devmap))
return PTR_ERR(devmap);
spin_lock(&dasd_devmap_lock);
if (flag)
devmap->features |= feature;
else
devmap->features &= ~feature;
if (devmap->device)
devmap->device->features = devmap->features;
spin_unlock(&dasd_devmap_lock);
return 0;
}
EXPORT_SYMBOL(dasd_set_feature);
int
dasd_add_sysfs_files(struct ccw_device *cdev)
{
return sysfs_create_group(&cdev->dev.kobj, &dasd_attr_group);
}
void
dasd_remove_sysfs_files(struct ccw_device *cdev)
{
sysfs_remove_group(&cdev->dev.kobj, &dasd_attr_group);
}
int
dasd_devmap_init(void)
{
int i;
/* Initialize devmap structures. */
dasd_max_devindex = 0;
for (i = 0; i < 256; i++)
INIT_LIST_HEAD(&dasd_hashlists[i]);
return 0;
}
void
dasd_devmap_exit(void)
{
dasd_forget_ranges();
}