KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
/*
|
|
|
|
|
* Copyright 2011 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
*/
|
|
|
|
|
|
2014-05-23 16:15:25 +08:00
|
|
|
#include <linux/cpu.h>
|
KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
#include <linux/kvm_host.h>
|
|
|
|
|
#include <linux/preempt.h>
|
2011-05-27 22:46:24 +08:00
|
|
|
#include <linux/export.h>
|
KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
#include <linux/sched.h>
|
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
|
#include <linux/init.h>
|
2013-07-02 13:45:16 +08:00
|
|
|
#include <linux/memblock.h>
|
|
|
|
|
#include <linux/sizes.h>
|
2014-08-07 07:05:28 +08:00
|
|
|
#include <linux/cma.h>
|
2014-12-03 10:30:40 +08:00
|
|
|
#include <linux/bitops.h>
|
KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
|
|
|
|
|
#include <asm/cputable.h>
|
|
|
|
|
#include <asm/kvm_ppc.h>
|
|
|
|
|
#include <asm/kvm_book3s.h>
|
2015-03-20 17:39:41 +08:00
|
|
|
#include <asm/archrandom.h>
|
KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
|
2014-08-07 07:05:28 +08:00
|
|
|
#define KVM_CMA_CHUNK_ORDER 18
|
|
|
|
|
|
2013-07-02 13:45:16 +08:00
|
|
|
/*
|
|
|
|
|
* Hash page table alignment on newer cpus(CPU_FTR_ARCH_206)
|
|
|
|
|
* should be power of 2.
|
|
|
|
|
*/
|
|
|
|
|
#define HPT_ALIGN_PAGES ((1 << 18) >> PAGE_SHIFT) /* 256k */
|
|
|
|
|
/*
|
|
|
|
|
* By default we reserve 5% of memory for hash pagetable allocation.
|
|
|
|
|
*/
|
|
|
|
|
static unsigned long kvm_cma_resv_ratio = 5;
|
KVM: PPC: Allocate RMAs (Real Mode Areas) at boot for use by guests
This adds infrastructure which will be needed to allow book3s_hv KVM to
run on older POWER processors, including PPC970, which don't support
the Virtual Real Mode Area (VRMA) facility, but only the Real Mode
Offset (RMO) facility. These processors require a physically
contiguous, aligned area of memory for each guest. When the guest does
an access in real mode (MMU off), the address is compared against a
limit value, and if it is lower, the address is ORed with an offset
value (from the Real Mode Offset Register (RMOR)) and the result becomes
the real address for the access. The size of the RMA has to be one of
a set of supported values, which usually includes 64MB, 128MB, 256MB
and some larger powers of 2.
Since we are unlikely to be able to allocate 64MB or more of physically
contiguous memory after the kernel has been running for a while, we
allocate a pool of RMAs at boot time using the bootmem allocator. The
size and number of the RMAs can be set using the kvm_rma_size=xx and
kvm_rma_count=xx kernel command line options.
KVM exports a new capability, KVM_CAP_PPC_RMA, to signal the availability
of the pool of preallocated RMAs. The capability value is 1 if the
processor can use an RMA but doesn't require one (because it supports
the VRMA facility), or 2 if the processor requires an RMA for each guest.
This adds a new ioctl, KVM_ALLOCATE_RMA, which allocates an RMA from the
pool and returns a file descriptor which can be used to map the RMA. It
also returns the size of the RMA in the argument structure.
Having an RMA means we will get multiple KMV_SET_USER_MEMORY_REGION
ioctl calls from userspace. To cope with this, we now preallocate the
kvm->arch.ram_pginfo array when the VM is created with a size sufficient
for up to 64GB of guest memory. Subsequently we will get rid of this
array and use memory associated with each memslot instead.
This moves most of the code that translates the user addresses into
host pfns (page frame numbers) out of kvmppc_prepare_vrma up one level
to kvmppc_core_prepare_memory_region. Also, instead of having to look
up the VMA for each page in order to check the page size, we now check
that the pages we get are compound pages of 16MB. However, if we are
adding memory that is mapped to an RMA, we don't bother with calling
get_user_pages_fast and instead just offset from the base pfn for the
RMA.
Typically the RMA gets added after vcpus are created, which makes it
inconvenient to have the LPCR (logical partition control register) value
in the vcpu->arch struct, since the LPCR controls whether the processor
uses RMA or VRMA for the guest. This moves the LPCR value into the
kvm->arch struct and arranges for the MER (mediated external request)
bit, which is the only bit that varies between vcpus, to be set in
assembly code when going into the guest if there is a pending external
interrupt request.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:25:44 +08:00
|
|
|
|
2014-08-07 07:05:28 +08:00
|
|
|
static struct cma *kvm_cma;
|
|
|
|
|
|
2013-07-02 13:45:16 +08:00
|
|
|
static int __init early_parse_kvm_cma_resv(char *p)
|
2012-01-17 02:12:11 +08:00
|
|
|
{
|
2013-07-02 13:45:16 +08:00
|
|
|
pr_debug("%s(%s)\n", __func__, p);
|
2012-01-17 02:12:11 +08:00
|
|
|
if (!p)
|
2013-07-02 13:45:16 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
return kstrtoul(p, 0, &kvm_cma_resv_ratio);
|
2012-01-17 02:12:11 +08:00
|
|
|
}
|
2013-07-02 13:45:16 +08:00
|
|
|
early_param("kvm_cma_resv_ratio", early_parse_kvm_cma_resv);
|
2012-01-17 02:12:11 +08:00
|
|
|
|
2013-07-02 13:45:16 +08:00
|
|
|
struct page *kvm_alloc_hpt(unsigned long nr_pages)
|
2012-01-17 02:12:11 +08:00
|
|
|
{
|
2014-08-14 13:03:07 +08:00
|
|
|
VM_BUG_ON(order_base_2(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
|
2014-08-07 07:05:28 +08:00
|
|
|
|
2014-12-03 10:30:38 +08:00
|
|
|
return cma_alloc(kvm_cma, nr_pages, order_base_2(HPT_ALIGN_PAGES));
|
2012-01-17 02:12:11 +08:00
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvm_alloc_hpt);
|
|
|
|
|
|
2013-07-02 13:45:16 +08:00
|
|
|
void kvm_release_hpt(struct page *page, unsigned long nr_pages)
|
2012-01-17 02:12:11 +08:00
|
|
|
{
|
2014-08-07 07:05:28 +08:00
|
|
|
cma_release(kvm_cma, page, nr_pages);
|
2012-01-17 02:12:11 +08:00
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvm_release_hpt);
|
|
|
|
|
|
2013-07-02 13:45:16 +08:00
|
|
|
/**
|
|
|
|
|
* kvm_cma_reserve() - reserve area for kvm hash pagetable
|
|
|
|
|
*
|
|
|
|
|
* This function reserves memory from early allocator. It should be
|
2014-09-17 20:15:34 +08:00
|
|
|
* called by arch specific code once the memblock allocator
|
2013-07-02 13:45:16 +08:00
|
|
|
* has been activated and all other subsystems have already allocated/reserved
|
|
|
|
|
* memory.
|
|
|
|
|
*/
|
|
|
|
|
void __init kvm_cma_reserve(void)
|
|
|
|
|
{
|
|
|
|
|
unsigned long align_size;
|
|
|
|
|
struct memblock_region *reg;
|
|
|
|
|
phys_addr_t selected_size = 0;
|
2014-09-29 16:02:38 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We need CMA reservation only when we are in HV mode
|
|
|
|
|
*/
|
|
|
|
|
if (!cpu_has_feature(CPU_FTR_HVMODE))
|
|
|
|
|
return;
|
2013-07-02 13:45:16 +08:00
|
|
|
/*
|
|
|
|
|
* We cannot use memblock_phys_mem_size() here, because
|
|
|
|
|
* memblock_analyze() has not been called yet.
|
|
|
|
|
*/
|
|
|
|
|
for_each_memblock(memory, reg)
|
|
|
|
|
selected_size += memblock_region_memory_end_pfn(reg) -
|
|
|
|
|
memblock_region_memory_base_pfn(reg);
|
|
|
|
|
|
|
|
|
|
selected_size = (selected_size * kvm_cma_resv_ratio / 100) << PAGE_SHIFT;
|
|
|
|
|
if (selected_size) {
|
|
|
|
|
pr_debug("%s: reserving %ld MiB for global area\n", __func__,
|
|
|
|
|
(unsigned long)selected_size / SZ_1M);
|
2014-12-03 10:30:38 +08:00
|
|
|
align_size = HPT_ALIGN_PAGES << PAGE_SHIFT;
|
2014-08-07 07:05:32 +08:00
|
|
|
cma_declare_contiguous(0, selected_size, 0, align_size,
|
|
|
|
|
KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, false, &kvm_cma);
|
2013-07-02 13:45:16 +08:00
|
|
|
}
|
|
|
|
|
}
|
2014-05-23 16:15:25 +08:00
|
|
|
|
2014-12-03 10:30:40 +08:00
|
|
|
/*
|
|
|
|
|
* Real-mode H_CONFER implementation.
|
|
|
|
|
* We check if we are the only vcpu out of this virtual core
|
|
|
|
|
* still running in the guest and not ceded. If so, we pop up
|
|
|
|
|
* to the virtual-mode implementation; if not, just return to
|
|
|
|
|
* the guest.
|
|
|
|
|
*/
|
|
|
|
|
long int kvmppc_rm_h_confer(struct kvm_vcpu *vcpu, int target,
|
|
|
|
|
unsigned int yield_count)
|
|
|
|
|
{
|
|
|
|
|
struct kvmppc_vcore *vc = vcpu->arch.vcore;
|
|
|
|
|
int threads_running;
|
|
|
|
|
int threads_ceded;
|
|
|
|
|
int threads_conferring;
|
|
|
|
|
u64 stop = get_tb() + 10 * tb_ticks_per_usec;
|
|
|
|
|
int rv = H_SUCCESS; /* => don't yield */
|
|
|
|
|
|
|
|
|
|
set_bit(vcpu->arch.ptid, &vc->conferring_threads);
|
2015-03-28 11:21:09 +08:00
|
|
|
while ((get_tb() < stop) && !VCORE_IS_EXITING(vc)) {
|
|
|
|
|
threads_running = VCORE_ENTRY_MAP(vc);
|
|
|
|
|
threads_ceded = vc->napping_threads;
|
|
|
|
|
threads_conferring = vc->conferring_threads;
|
|
|
|
|
if ((threads_ceded | threads_conferring) == threads_running) {
|
2014-12-03 10:30:40 +08:00
|
|
|
rv = H_TOO_HARD; /* => do yield */
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
clear_bit(vcpu->arch.ptid, &vc->conferring_threads);
|
|
|
|
|
return rv;
|
|
|
|
|
}
|
|
|
|
|
|
2014-05-23 16:15:25 +08:00
|
|
|
/*
|
|
|
|
|
* When running HV mode KVM we need to block certain operations while KVM VMs
|
|
|
|
|
* exist in the system. We use a counter of VMs to track this.
|
|
|
|
|
*
|
|
|
|
|
* One of the operations we need to block is onlining of secondaries, so we
|
|
|
|
|
* protect hv_vm_count with get/put_online_cpus().
|
|
|
|
|
*/
|
|
|
|
|
static atomic_t hv_vm_count;
|
|
|
|
|
|
|
|
|
|
void kvm_hv_vm_activated(void)
|
|
|
|
|
{
|
|
|
|
|
get_online_cpus();
|
|
|
|
|
atomic_inc(&hv_vm_count);
|
|
|
|
|
put_online_cpus();
|
|
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvm_hv_vm_activated);
|
|
|
|
|
|
|
|
|
|
void kvm_hv_vm_deactivated(void)
|
|
|
|
|
{
|
|
|
|
|
get_online_cpus();
|
|
|
|
|
atomic_dec(&hv_vm_count);
|
|
|
|
|
put_online_cpus();
|
|
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvm_hv_vm_deactivated);
|
|
|
|
|
|
|
|
|
|
bool kvm_hv_mode_active(void)
|
|
|
|
|
{
|
|
|
|
|
return atomic_read(&hv_vm_count) != 0;
|
|
|
|
|
}
|
2014-06-02 09:03:00 +08:00
|
|
|
|
|
|
|
|
extern int hcall_real_table[], hcall_real_table_end[];
|
|
|
|
|
|
|
|
|
|
int kvmppc_hcall_impl_hv_realmode(unsigned long cmd)
|
|
|
|
|
{
|
|
|
|
|
cmd /= 4;
|
|
|
|
|
if (cmd < hcall_real_table_end - hcall_real_table &&
|
|
|
|
|
hcall_real_table[cmd])
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvmppc_hcall_impl_hv_realmode);
|
2015-03-20 17:39:41 +08:00
|
|
|
|
|
|
|
|
int kvmppc_hwrng_present(void)
|
|
|
|
|
{
|
|
|
|
|
return powernv_hwrng_present();
|
|
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL_GPL(kvmppc_hwrng_present);
|
|
|
|
|
|
|
|
|
|
long kvmppc_h_random(struct kvm_vcpu *vcpu)
|
|
|
|
|
{
|
|
|
|
|
if (powernv_get_random_real_mode(&vcpu->arch.gpr[4]))
|
|
|
|
|
return H_SUCCESS;
|
|
|
|
|
|
|
|
|
|
return H_HARDWARE;
|
|
|
|
|
}
|