OpenCloudOS-Kernel/drivers/input/touchscreen/penmount.c

183 lines
3.8 KiB
C
Raw Normal View History

/*
* Penmount serial touchscreen driver
*
* Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
*
* Based on ELO driver (drivers/input/touchscreen/elo.c)
* Copyright (c) 2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Penmount serial touchscreen driver"
MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Definitions & global arrays.
*/
#define PM_MAX_LENGTH 5
/*
* Per-touchscreen data.
*/
struct pm {
struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[PM_MAX_LENGTH];
char phys[32];
};
static irqreturn_t pm_interrupt(struct serio *serio,
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
unsigned char data, unsigned int flags)
{
struct pm *pm = serio_get_drvdata(serio);
struct input_dev *dev = pm->dev;
pm->data[pm->idx] = data;
if (pm->data[0] & 0x80) {
if (PM_MAX_LENGTH == ++pm->idx) {
input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
input_sync(dev);
pm->idx = 0;
}
}
return IRQ_HANDLED;
}
/*
* pm_disconnect() is the opposite of pm_connect()
*/
static void pm_disconnect(struct serio *serio)
{
struct pm *pm = serio_get_drvdata(serio);
input_get_device(pm->dev);
input_unregister_device(pm->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_put_device(pm->dev);
kfree(pm);
}
/*
* pm_connect() is the routine that is called when someone adds a
* new serio device that supports Gunze protocol and registers it as
* an input device.
*/
static int pm_connect(struct serio *serio, struct serio_driver *drv)
{
struct pm *pm;
struct input_dev *input_dev;
int err;
pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
input_dev = input_allocate_device();
if (!pm || !input_dev) {
err = -ENOMEM;
goto fail1;
}
pm->serio = serio;
pm->dev = input_dev;
snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
input_dev->name = "Penmount Serial TouchScreen";
input_dev->phys = pm->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_PENMOUNT;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);
serio_set_drvdata(serio, pm);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(pm->dev);
if (err)
goto fail3;
return 0;
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
fail1: input_free_device(input_dev);
kfree(pm);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id pm_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_PENMOUNT,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, pm_serio_ids);
static struct serio_driver pm_drv = {
.driver = {
.name = "penmountlpc",
},
.description = DRIVER_DESC,
.id_table = pm_serio_ids,
.interrupt = pm_interrupt,
.connect = pm_connect,
.disconnect = pm_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init pm_init(void)
{
return serio_register_driver(&pm_drv);
}
static void __exit pm_exit(void)
{
serio_unregister_driver(&pm_drv);
}
module_init(pm_init);
module_exit(pm_exit);