OpenCloudOS-Kernel/fs/btrfs/space-info.c

1719 lines
54 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
#include "misc.h"
#include "ctree.h"
#include "space-info.h"
#include "sysfs.h"
#include "volumes.h"
#include "free-space-cache.h"
#include "ordered-data.h"
#include "transaction.h"
#include "block-group.h"
/*
* HOW DOES SPACE RESERVATION WORK
*
* If you want to know about delalloc specifically, there is a separate comment
* for that with the delalloc code. This comment is about how the whole system
* works generally.
*
* BASIC CONCEPTS
*
* 1) space_info. This is the ultimate arbiter of how much space we can use.
* There's a description of the bytes_ fields with the struct declaration,
* refer to that for specifics on each field. Suffice it to say that for
* reservations we care about total_bytes - SUM(space_info->bytes_) when
* determining if there is space to make an allocation. There is a space_info
* for METADATA, SYSTEM, and DATA areas.
*
* 2) block_rsv's. These are basically buckets for every different type of
* metadata reservation we have. You can see the comment in the block_rsv
* code on the rules for each type, but generally block_rsv->reserved is how
* much space is accounted for in space_info->bytes_may_use.
*
* 3) btrfs_calc*_size. These are the worst case calculations we used based
* on the number of items we will want to modify. We have one for changing
* items, and one for inserting new items. Generally we use these helpers to
* determine the size of the block reserves, and then use the actual bytes
* values to adjust the space_info counters.
*
* MAKING RESERVATIONS, THE NORMAL CASE
*
* We call into either btrfs_reserve_data_bytes() or
* btrfs_reserve_metadata_bytes(), depending on which we're looking for, with
* num_bytes we want to reserve.
*
* ->reserve
* space_info->bytes_may_reserve += num_bytes
*
* ->extent allocation
* Call btrfs_add_reserved_bytes() which does
* space_info->bytes_may_reserve -= num_bytes
* space_info->bytes_reserved += extent_bytes
*
* ->insert reference
* Call btrfs_update_block_group() which does
* space_info->bytes_reserved -= extent_bytes
* space_info->bytes_used += extent_bytes
*
* MAKING RESERVATIONS, FLUSHING NORMALLY (non-priority)
*
* Assume we are unable to simply make the reservation because we do not have
* enough space
*
* -> __reserve_bytes
* create a reserve_ticket with ->bytes set to our reservation, add it to
* the tail of space_info->tickets, kick async flush thread
*
* ->handle_reserve_ticket
* wait on ticket->wait for ->bytes to be reduced to 0, or ->error to be set
* on the ticket.
*
* -> btrfs_async_reclaim_metadata_space/btrfs_async_reclaim_data_space
* Flushes various things attempting to free up space.
*
* -> btrfs_try_granting_tickets()
* This is called by anything that either subtracts space from
* space_info->bytes_may_use, ->bytes_pinned, etc, or adds to the
* space_info->total_bytes. This loops through the ->priority_tickets and
* then the ->tickets list checking to see if the reservation can be
* completed. If it can the space is added to space_info->bytes_may_use and
* the ticket is woken up.
*
* -> ticket wakeup
* Check if ->bytes == 0, if it does we got our reservation and we can carry
* on, if not return the appropriate error (ENOSPC, but can be EINTR if we
* were interrupted.)
*
* MAKING RESERVATIONS, FLUSHING HIGH PRIORITY
*
* Same as the above, except we add ourselves to the
* space_info->priority_tickets, and we do not use ticket->wait, we simply
* call flush_space() ourselves for the states that are safe for us to call
* without deadlocking and hope for the best.
*
* THE FLUSHING STATES
*
* Generally speaking we will have two cases for each state, a "nice" state
* and a "ALL THE THINGS" state. In btrfs we delay a lot of work in order to
* reduce the locking over head on the various trees, and even to keep from
* doing any work at all in the case of delayed refs. Each of these delayed
* things however hold reservations, and so letting them run allows us to
* reclaim space so we can make new reservations.
*
* FLUSH_DELAYED_ITEMS
* Every inode has a delayed item to update the inode. Take a simple write
* for example, we would update the inode item at write time to update the
* mtime, and then again at finish_ordered_io() time in order to update the
* isize or bytes. We keep these delayed items to coalesce these operations
* into a single operation done on demand. These are an easy way to reclaim
* metadata space.
*
* FLUSH_DELALLOC
* Look at the delalloc comment to get an idea of how much space is reserved
* for delayed allocation. We can reclaim some of this space simply by
* running delalloc, but usually we need to wait for ordered extents to
* reclaim the bulk of this space.
*
* FLUSH_DELAYED_REFS
* We have a block reserve for the outstanding delayed refs space, and every
* delayed ref operation holds a reservation. Running these is a quick way
* to reclaim space, but we want to hold this until the end because COW can
* churn a lot and we can avoid making some extent tree modifications if we
* are able to delay for as long as possible.
*
* ALLOC_CHUNK
* We will skip this the first time through space reservation, because of
* overcommit and we don't want to have a lot of useless metadata space when
* our worst case reservations will likely never come true.
*
* RUN_DELAYED_IPUTS
* If we're freeing inodes we're likely freeing checksums, file extent
* items, and extent tree items. Loads of space could be freed up by these
* operations, however they won't be usable until the transaction commits.
*
* COMMIT_TRANS
btrfs: rip out may_commit_transaction may_commit_transaction was introduced before the ticketing infrastructure existed. There was a problem where we'd legitimately be out of space, but every reservation would trigger a transaction commit and then fail. Thus if you had 1000 things trying to make a reservation, they'd all do the flushing loop and thus commit the transaction 1000 times before they'd get their ENOSPC. This helper was introduced to short circuit this, if there wasn't space that could be reclaimed by committing the transaction then simply ENOSPC out. This made true ENOSPC tests much faster as we didn't waste a bunch of time. However many of our bugs over the years have been from cases where we didn't account for some space that would be reclaimed by committing a transaction. The delayed refs rsv space, delayed rsv, many pinned bytes miscalculations, etc. And in the meantime the original problem has been solved with ticketing. We no longer will commit the transaction 1000 times. Instead we'll get 1000 waiters, we will go through the flushing mechanisms, and if there's no progress after 2 loops we ENOSPC everybody out. The ticketing infrastructure gives us a deterministic way to see if we're making progress or not, thus we avoid a lot of extra work. So simplify this step by simply unconditionally committing the transaction. This removes what is arguably our most common source of early ENOSPC bugs and will allow us to drastically simplify many of the things we track because we simply won't need them with this stuff gone. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22 20:51:58 +08:00
* This will commit the transaction. Historically we had a lot of logic
* surrounding whether or not we'd commit the transaction, but this waits born
* out of a pre-tickets era where we could end up committing the transaction
* thousands of times in a row without making progress. Now thanks to our
* ticketing system we know if we're not making progress and can error
* everybody out after a few commits rather than burning the disk hoping for
* a different answer.
*
* OVERCOMMIT
*
* Because we hold so many reservations for metadata we will allow you to
* reserve more space than is currently free in the currently allocate
* metadata space. This only happens with metadata, data does not allow
* overcommitting.
*
* You can see the current logic for when we allow overcommit in
* btrfs_can_overcommit(), but it only applies to unallocated space. If there
* is no unallocated space to be had, all reservations are kept within the
* free space in the allocated metadata chunks.
*
* Because of overcommitting, you generally want to use the
* btrfs_can_overcommit() logic for metadata allocations, as it does the right
* thing with or without extra unallocated space.
*/
u64 __pure btrfs_space_info_used(struct btrfs_space_info *s_info,
bool may_use_included)
{
ASSERT(s_info);
return s_info->bytes_used + s_info->bytes_reserved +
s_info->bytes_pinned + s_info->bytes_readonly +
s_info->bytes_zone_unusable +
(may_use_included ? s_info->bytes_may_use : 0);
}
/*
* after adding space to the filesystem, we need to clear the full flags
* on all the space infos.
*/
void btrfs_clear_space_info_full(struct btrfs_fs_info *info)
{
struct list_head *head = &info->space_info;
struct btrfs_space_info *found;
list_for_each_entry(found, head, list)
found->full = 0;
}
/*
* Block groups with more than this value (percents) of unusable space will be
* scheduled for background reclaim.
*/
#define BTRFS_DEFAULT_ZONED_RECLAIM_THRESH (75)
/*
* Calculate chunk size depending on volume type (regular or zoned).
*/
static u64 calc_chunk_size(const struct btrfs_fs_info *fs_info, u64 flags)
{
if (btrfs_is_zoned(fs_info))
return fs_info->zone_size;
ASSERT(flags & BTRFS_BLOCK_GROUP_TYPE_MASK);
if (flags & BTRFS_BLOCK_GROUP_DATA)
return SZ_1G;
else if (flags & BTRFS_BLOCK_GROUP_SYSTEM)
return SZ_32M;
/* Handle BTRFS_BLOCK_GROUP_METADATA */
if (fs_info->fs_devices->total_rw_bytes > 50ULL * SZ_1G)
return SZ_1G;
return SZ_256M;
}
/*
* Update default chunk size.
*/
void btrfs_update_space_info_chunk_size(struct btrfs_space_info *space_info,
u64 chunk_size)
{
WRITE_ONCE(space_info->chunk_size, chunk_size);
}
static int create_space_info(struct btrfs_fs_info *info, u64 flags)
{
struct btrfs_space_info *space_info;
int i;
int ret;
space_info = kzalloc(sizeof(*space_info), GFP_NOFS);
if (!space_info)
return -ENOMEM;
for (i = 0; i < BTRFS_NR_RAID_TYPES; i++)
INIT_LIST_HEAD(&space_info->block_groups[i]);
init_rwsem(&space_info->groups_sem);
spin_lock_init(&space_info->lock);
space_info->flags = flags & BTRFS_BLOCK_GROUP_TYPE_MASK;
space_info->force_alloc = CHUNK_ALLOC_NO_FORCE;
INIT_LIST_HEAD(&space_info->ro_bgs);
INIT_LIST_HEAD(&space_info->tickets);
INIT_LIST_HEAD(&space_info->priority_tickets);
space_info->clamp = 1;
btrfs_update_space_info_chunk_size(space_info, calc_chunk_size(info, flags));
if (btrfs_is_zoned(info))
space_info->bg_reclaim_threshold = BTRFS_DEFAULT_ZONED_RECLAIM_THRESH;
ret = btrfs_sysfs_add_space_info_type(info, space_info);
if (ret)
return ret;
list_add(&space_info->list, &info->space_info);
if (flags & BTRFS_BLOCK_GROUP_DATA)
info->data_sinfo = space_info;
return ret;
}
int btrfs_init_space_info(struct btrfs_fs_info *fs_info)
{
struct btrfs_super_block *disk_super;
u64 features;
u64 flags;
int mixed = 0;
int ret;
disk_super = fs_info->super_copy;
if (!btrfs_super_root(disk_super))
return -EINVAL;
features = btrfs_super_incompat_flags(disk_super);
if (features & BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS)
mixed = 1;
flags = BTRFS_BLOCK_GROUP_SYSTEM;
ret = create_space_info(fs_info, flags);
if (ret)
goto out;
if (mixed) {
flags = BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA;
ret = create_space_info(fs_info, flags);
} else {
flags = BTRFS_BLOCK_GROUP_METADATA;
ret = create_space_info(fs_info, flags);
if (ret)
goto out;
flags = BTRFS_BLOCK_GROUP_DATA;
ret = create_space_info(fs_info, flags);
}
out:
return ret;
}
void btrfs_update_space_info(struct btrfs_fs_info *info, u64 flags,
u64 total_bytes, u64 bytes_used,
u64 bytes_readonly, u64 bytes_zone_unusable,
bool active, struct btrfs_space_info **space_info)
{
struct btrfs_space_info *found;
int factor;
factor = btrfs_bg_type_to_factor(flags);
found = btrfs_find_space_info(info, flags);
ASSERT(found);
spin_lock(&found->lock);
found->total_bytes += total_bytes;
if (active)
found->active_total_bytes += total_bytes;
found->disk_total += total_bytes * factor;
found->bytes_used += bytes_used;
found->disk_used += bytes_used * factor;
found->bytes_readonly += bytes_readonly;
found->bytes_zone_unusable += bytes_zone_unusable;
if (total_bytes > 0)
found->full = 0;
btrfs_try_granting_tickets(info, found);
spin_unlock(&found->lock);
*space_info = found;
}
struct btrfs_space_info *btrfs_find_space_info(struct btrfs_fs_info *info,
u64 flags)
{
struct list_head *head = &info->space_info;
struct btrfs_space_info *found;
flags &= BTRFS_BLOCK_GROUP_TYPE_MASK;
list_for_each_entry(found, head, list) {
if (found->flags & flags)
return found;
}
return NULL;
}
static u64 calc_available_free_space(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
enum btrfs_reserve_flush_enum flush)
{
u64 profile;
u64 avail;
int factor;
if (space_info->flags & BTRFS_BLOCK_GROUP_SYSTEM)
profile = btrfs_system_alloc_profile(fs_info);
else
profile = btrfs_metadata_alloc_profile(fs_info);
avail = atomic64_read(&fs_info->free_chunk_space);
/*
* If we have dup, raid1 or raid10 then only half of the free
* space is actually usable. For raid56, the space info used
* doesn't include the parity drive, so we don't have to
* change the math
*/
factor = btrfs_bg_type_to_factor(profile);
avail = div_u64(avail, factor);
/*
* If we aren't flushing all things, let us overcommit up to
* 1/2th of the space. If we can flush, don't let us overcommit
* too much, let it overcommit up to 1/8 of the space.
*/
if (flush == BTRFS_RESERVE_FLUSH_ALL)
avail >>= 3;
else
avail >>= 1;
return avail;
}
static inline u64 writable_total_bytes(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
/*
* On regular filesystem, all total_bytes are always writable. On zoned
* filesystem, there may be a limitation imposed by max_active_zones.
* For metadata allocation, we cannot finish an existing active block
* group to avoid a deadlock. Thus, we need to consider only the active
* groups to be writable for metadata space.
*/
if (!btrfs_is_zoned(fs_info) || (space_info->flags & BTRFS_BLOCK_GROUP_DATA))
return space_info->total_bytes;
return space_info->active_total_bytes;
}
int btrfs_can_overcommit(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info, u64 bytes,
enum btrfs_reserve_flush_enum flush)
{
u64 avail;
u64 used;
/* Don't overcommit when in mixed mode */
if (space_info->flags & BTRFS_BLOCK_GROUP_DATA)
return 0;
used = btrfs_space_info_used(space_info, true);
avail = calc_available_free_space(fs_info, space_info, flush);
if (used + bytes < writable_total_bytes(fs_info, space_info) + avail)
return 1;
return 0;
}
static void remove_ticket(struct btrfs_space_info *space_info,
struct reserve_ticket *ticket)
{
if (!list_empty(&ticket->list)) {
list_del_init(&ticket->list);
ASSERT(space_info->reclaim_size >= ticket->bytes);
space_info->reclaim_size -= ticket->bytes;
}
}
/*
* This is for space we already have accounted in space_info->bytes_may_use, so
* basically when we're returning space from block_rsv's.
*/
void btrfs_try_granting_tickets(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
struct list_head *head;
enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_NO_FLUSH;
lockdep_assert_held(&space_info->lock);
head = &space_info->priority_tickets;
again:
btrfs: stop partially refilling tickets when releasing space btrfs_space_info_add_old_bytes is used when adding the extra space from an existing reservation back into the space_info to be used by any waiting tickets. In order to keep us from overcommitting we check to make sure that we can still use this space for our reserve ticket, and if we cannot we'll simply subtract it from space_info->bytes_may_use. However this is problematic, because it assumes that only changes to bytes_may_use would affect our ability to make reservations. Any changes to bytes_reserved would be missed. If we were unable to make a reservation prior because of reserved space, but that reserved space was free'd due to unlink or truncate and we were allowed to immediately reclaim that metadata space we would still ENOSPC. Consider the example where we create a file with a bunch of extents, using up 2MiB of actual space for the new tree blocks. Then we try to make a reservation of 2MiB but we do not have enough space to make this reservation. The iput() occurs in another thread and we remove this space, and since we did not write the blocks we simply do space_info->bytes_reserved -= 2MiB. We would never see this because we do not check our space info used, we just try to re-use the freed reservations. To fix this problem, and to greatly simplify the wakeup code, do away with this partial refilling nonsense. Use btrfs_space_info_add_old_bytes to subtract the reservation from space_info->bytes_may_use, and then check the ticket against the total used of the space_info the same way we do with the initial reservation attempt. This keeps the reservation logic consistent and solves the problem of early ENOSPC in the case that we free up space in places other than bytes_may_use and bytes_pinned. Thanks, Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-08-28 23:15:24 +08:00
while (!list_empty(head)) {
struct reserve_ticket *ticket;
u64 used = btrfs_space_info_used(space_info, true);
ticket = list_first_entry(head, struct reserve_ticket, list);
/* Check and see if our ticket can be satisfied now. */
if ((used + ticket->bytes <= writable_total_bytes(fs_info, space_info)) ||
btrfs_can_overcommit(fs_info, space_info, ticket->bytes,
flush)) {
btrfs: stop partially refilling tickets when releasing space btrfs_space_info_add_old_bytes is used when adding the extra space from an existing reservation back into the space_info to be used by any waiting tickets. In order to keep us from overcommitting we check to make sure that we can still use this space for our reserve ticket, and if we cannot we'll simply subtract it from space_info->bytes_may_use. However this is problematic, because it assumes that only changes to bytes_may_use would affect our ability to make reservations. Any changes to bytes_reserved would be missed. If we were unable to make a reservation prior because of reserved space, but that reserved space was free'd due to unlink or truncate and we were allowed to immediately reclaim that metadata space we would still ENOSPC. Consider the example where we create a file with a bunch of extents, using up 2MiB of actual space for the new tree blocks. Then we try to make a reservation of 2MiB but we do not have enough space to make this reservation. The iput() occurs in another thread and we remove this space, and since we did not write the blocks we simply do space_info->bytes_reserved -= 2MiB. We would never see this because we do not check our space info used, we just try to re-use the freed reservations. To fix this problem, and to greatly simplify the wakeup code, do away with this partial refilling nonsense. Use btrfs_space_info_add_old_bytes to subtract the reservation from space_info->bytes_may_use, and then check the ticket against the total used of the space_info the same way we do with the initial reservation attempt. This keeps the reservation logic consistent and solves the problem of early ENOSPC in the case that we free up space in places other than bytes_may_use and bytes_pinned. Thanks, Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-08-28 23:15:24 +08:00
btrfs_space_info_update_bytes_may_use(fs_info,
space_info,
ticket->bytes);
remove_ticket(space_info, ticket);
ticket->bytes = 0;
space_info->tickets_id++;
wake_up(&ticket->wait);
} else {
btrfs: stop partially refilling tickets when releasing space btrfs_space_info_add_old_bytes is used when adding the extra space from an existing reservation back into the space_info to be used by any waiting tickets. In order to keep us from overcommitting we check to make sure that we can still use this space for our reserve ticket, and if we cannot we'll simply subtract it from space_info->bytes_may_use. However this is problematic, because it assumes that only changes to bytes_may_use would affect our ability to make reservations. Any changes to bytes_reserved would be missed. If we were unable to make a reservation prior because of reserved space, but that reserved space was free'd due to unlink or truncate and we were allowed to immediately reclaim that metadata space we would still ENOSPC. Consider the example where we create a file with a bunch of extents, using up 2MiB of actual space for the new tree blocks. Then we try to make a reservation of 2MiB but we do not have enough space to make this reservation. The iput() occurs in another thread and we remove this space, and since we did not write the blocks we simply do space_info->bytes_reserved -= 2MiB. We would never see this because we do not check our space info used, we just try to re-use the freed reservations. To fix this problem, and to greatly simplify the wakeup code, do away with this partial refilling nonsense. Use btrfs_space_info_add_old_bytes to subtract the reservation from space_info->bytes_may_use, and then check the ticket against the total used of the space_info the same way we do with the initial reservation attempt. This keeps the reservation logic consistent and solves the problem of early ENOSPC in the case that we free up space in places other than bytes_may_use and bytes_pinned. Thanks, Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-08-28 23:15:24 +08:00
break;
}
}
btrfs: stop partially refilling tickets when releasing space btrfs_space_info_add_old_bytes is used when adding the extra space from an existing reservation back into the space_info to be used by any waiting tickets. In order to keep us from overcommitting we check to make sure that we can still use this space for our reserve ticket, and if we cannot we'll simply subtract it from space_info->bytes_may_use. However this is problematic, because it assumes that only changes to bytes_may_use would affect our ability to make reservations. Any changes to bytes_reserved would be missed. If we were unable to make a reservation prior because of reserved space, but that reserved space was free'd due to unlink or truncate and we were allowed to immediately reclaim that metadata space we would still ENOSPC. Consider the example where we create a file with a bunch of extents, using up 2MiB of actual space for the new tree blocks. Then we try to make a reservation of 2MiB but we do not have enough space to make this reservation. The iput() occurs in another thread and we remove this space, and since we did not write the blocks we simply do space_info->bytes_reserved -= 2MiB. We would never see this because we do not check our space info used, we just try to re-use the freed reservations. To fix this problem, and to greatly simplify the wakeup code, do away with this partial refilling nonsense. Use btrfs_space_info_add_old_bytes to subtract the reservation from space_info->bytes_may_use, and then check the ticket against the total used of the space_info the same way we do with the initial reservation attempt. This keeps the reservation logic consistent and solves the problem of early ENOSPC in the case that we free up space in places other than bytes_may_use and bytes_pinned. Thanks, Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-08-28 23:15:24 +08:00
if (head == &space_info->priority_tickets) {
head = &space_info->tickets;
flush = BTRFS_RESERVE_FLUSH_ALL;
goto again;
}
}
#define DUMP_BLOCK_RSV(fs_info, rsv_name) \
do { \
struct btrfs_block_rsv *__rsv = &(fs_info)->rsv_name; \
spin_lock(&__rsv->lock); \
btrfs_info(fs_info, #rsv_name ": size %llu reserved %llu", \
__rsv->size, __rsv->reserved); \
spin_unlock(&__rsv->lock); \
} while (0)
static void __btrfs_dump_space_info(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *info)
{
lockdep_assert_held(&info->lock);
/* The free space could be negative in case of overcommit */
btrfs_info(fs_info, "space_info %llu has %lld free, is %sfull",
info->flags,
(s64)(info->total_bytes - btrfs_space_info_used(info, true)),
info->full ? "" : "not ");
btrfs_info(fs_info,
"space_info total=%llu, used=%llu, pinned=%llu, reserved=%llu, may_use=%llu, readonly=%llu zone_unusable=%llu",
info->total_bytes, info->bytes_used, info->bytes_pinned,
info->bytes_reserved, info->bytes_may_use,
info->bytes_readonly, info->bytes_zone_unusable);
DUMP_BLOCK_RSV(fs_info, global_block_rsv);
DUMP_BLOCK_RSV(fs_info, trans_block_rsv);
DUMP_BLOCK_RSV(fs_info, chunk_block_rsv);
DUMP_BLOCK_RSV(fs_info, delayed_block_rsv);
DUMP_BLOCK_RSV(fs_info, delayed_refs_rsv);
}
void btrfs_dump_space_info(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *info, u64 bytes,
int dump_block_groups)
{
struct btrfs_block_group *cache;
int index = 0;
spin_lock(&info->lock);
__btrfs_dump_space_info(fs_info, info);
spin_unlock(&info->lock);
if (!dump_block_groups)
return;
down_read(&info->groups_sem);
again:
list_for_each_entry(cache, &info->block_groups[index], list) {
spin_lock(&cache->lock);
btrfs_info(fs_info,
"block group %llu has %llu bytes, %llu used %llu pinned %llu reserved %llu zone_unusable %s",
cache->start, cache->length, cache->used, cache->pinned,
cache->reserved, cache->zone_unusable,
cache->ro ? "[readonly]" : "");
spin_unlock(&cache->lock);
btrfs: fix lockdep splat from btrfs_dump_space_info When running with -o enospc_debug you can get the following splat if one of the dump_space_info's trip ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc5+ #20 Tainted: G OE ------------------------------------------------------ dd/563090 is trying to acquire lock: ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs] but task is already holding lock: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&cache->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs] find_free_extent+0x7ef/0x13b0 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0xc1/0x340 [btrfs] alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs] __btrfs_cow_block+0x122/0x530 [btrfs] btrfs_cow_block+0x106/0x210 [btrfs] commit_cowonly_roots+0x55/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&space_info->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs] btrfs_inode_rsv_release+0x4f/0x170 [btrfs] btrfs_clear_delalloc_extent+0x155/0x480 [btrfs] clear_state_bit+0x81/0x1a0 [btrfs] __clear_extent_bit+0x25c/0x5d0 [btrfs] clear_extent_bit+0x15/0x20 [btrfs] btrfs_invalidatepage+0x2b7/0x3c0 [btrfs] truncate_cleanup_page+0x47/0xe0 truncate_inode_pages_range+0x238/0x840 truncate_pagecache+0x44/0x60 btrfs_setattr+0x202/0x5e0 [btrfs] notify_change+0x33b/0x490 do_truncate+0x76/0xd0 path_openat+0x687/0xa10 do_filp_open+0x91/0x100 do_sys_openat2+0x215/0x2d0 do_sys_open+0x44/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&tree->lock#2){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 find_first_extent_bit+0x32/0x150 [btrfs] write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs] __btrfs_write_out_cache+0x172/0x480 [btrfs] btrfs_write_out_cache+0x7a/0xf0 [btrfs] btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs] commit_cowonly_roots+0x245/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] close_ctree+0xf9/0x2f5 [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&ctl->tree_lock){+.+.}-{2:2}: __lock_acquire+0x1240/0x2460 lock_acquire+0xab/0x360 _raw_spin_lock+0x25/0x30 btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &ctl->tree_lock --> &space_info->lock --> &cache->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cache->lock); lock(&space_info->lock); lock(&cache->lock); lock(&ctl->tree_lock); *** DEADLOCK *** 6 locks held by dd/563090: #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200 #1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs] #2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs] #3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs] #4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs] #5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] stack backtrace: CPU: 3 PID: 563090 Comm: dd Tainted: G OE 5.8.0-rc5+ #20 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011 Call Trace: dump_stack+0x96/0xd0 check_noncircular+0x162/0x180 __lock_acquire+0x1240/0x2460 ? wake_up_klogd.part.0+0x30/0x40 lock_acquire+0xab/0x360 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] _raw_spin_lock+0x25/0x30 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] ? start_transaction+0xe0/0x5b0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] ? ktime_get_coarse_real_ts64+0xa8/0xd0 ? trace_hardirqs_on+0x1c/0xe0 btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is because we're holding the block_group->lock while trying to dump the free space cache. However we don't need this lock, we just need it to read the values for the printk, so move the free space cache dumping outside of the block group lock. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-18 03:12:29 +08:00
btrfs_dump_free_space(cache, bytes);
}
if (++index < BTRFS_NR_RAID_TYPES)
goto again;
up_read(&info->groups_sem);
}
static inline u64 calc_reclaim_items_nr(struct btrfs_fs_info *fs_info,
u64 to_reclaim)
{
u64 bytes;
u64 nr;
bytes = btrfs_calc_insert_metadata_size(fs_info, 1);
nr = div64_u64(to_reclaim, bytes);
if (!nr)
nr = 1;
return nr;
}
#define EXTENT_SIZE_PER_ITEM SZ_256K
/*
* shrink metadata reservation for delalloc
*/
static void shrink_delalloc(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
u64 to_reclaim, bool wait_ordered,
bool for_preempt)
{
struct btrfs_trans_handle *trans;
u64 delalloc_bytes;
u64 ordered_bytes;
u64 items;
long time_left;
int loops;
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
delalloc_bytes = percpu_counter_sum_positive(&fs_info->delalloc_bytes);
ordered_bytes = percpu_counter_sum_positive(&fs_info->ordered_bytes);
if (delalloc_bytes == 0 && ordered_bytes == 0)
return;
/* Calc the number of the pages we need flush for space reservation */
if (to_reclaim == U64_MAX) {
items = U64_MAX;
} else {
/*
* to_reclaim is set to however much metadata we need to
* reclaim, but reclaiming that much data doesn't really track
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
* exactly. What we really want to do is reclaim full inode's
* worth of reservations, however that's not available to us
* here. We will take a fraction of the delalloc bytes for our
* flushing loops and hope for the best. Delalloc will expand
* the amount we write to cover an entire dirty extent, which
* will reclaim the metadata reservation for that range. If
* it's not enough subsequent flush stages will be more
* aggressive.
*/
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
to_reclaim = max(to_reclaim, delalloc_bytes >> 3);
items = calc_reclaim_items_nr(fs_info, to_reclaim) * 2;
}
trans = current->journal_info;
/*
* If we are doing more ordered than delalloc we need to just wait on
* ordered extents, otherwise we'll waste time trying to flush delalloc
* that likely won't give us the space back we need.
*/
if (ordered_bytes > delalloc_bytes && !for_preempt)
wait_ordered = true;
loops = 0;
while ((delalloc_bytes || ordered_bytes) && loops < 3) {
u64 temp = min(delalloc_bytes, to_reclaim) >> PAGE_SHIFT;
long nr_pages = min_t(u64, temp, LONG_MAX);
btrfs: wait on async extents when flushing delalloc I've been debugging an early ENOSPC problem in production and finally root caused it to this problem. When we switched to the per-inode in 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") I pulled out the async extent handling, because we were doing the correct thing by calling filemap_flush() if we had async extents set. This would properly wait on any async extents by locking the page in the second flush, thus making sure our ordered extents were properly set up. However when I switched us back to page based flushing, I used sync_inode(), which allows us to pass in our own wbc. The problem here is that sync_inode() is smarter than the filemap_* helpers, it tries to avoid calling writepages at all. This means that our second call could skip calling do_writepages altogether, and thus not wait on the pagelock for the async helpers. This means we could come back before any ordered extents were created and then simply continue on in our flushing mechanisms and ENOSPC out when we have plenty of space to use. Fix this by putting back the async pages logic in shrink_delalloc. This allows us to bulk write out everything that we need to, and then we can wait in one place for the async helpers to catch up, and then wait on any ordered extents that are created. Fixes: e076ab2a2ca7 ("btrfs: shrink delalloc pages instead of full inodes") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:21 +08:00
int async_pages;
btrfs: shrink delalloc pages instead of full inodes Commit 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing some infrastructure we have in place to flush inodes that we use for device replace and snapshot. However this introduced a pretty serious performance regression. To reproduce the user untarred the source tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would see it take anywhere from 5 to 20 times as long to untar in 5.10 compared to 5.9. This was observed on fast devices (SSD and better) and not on HDD. The root cause is because before we would generally use the normal writeback path to reclaim delalloc space, and for this we would provide it with the number of pages we wanted to flush. The referenced commit changed this to flush that many inodes, which drastically increased the amount of space we were flushing in certain cases, which severely affected performance. We cannot revert this patch unfortunately because of 3d45f221ce62 ("btrfs: fix deadlock when cloning inline extent and low on free metadata space") which requires the ability to skip flushing inodes that are being cloned in certain scenarios, which means we need to keep using our flushing infrastructure or risk re-introducing the deadlock. Instead to fix this problem we can go back to providing btrfs_start_delalloc_roots with a number of pages to flush, and then set up a writeback_control and utilize sync_inode() to handle the flushing for us. This gives us the same behavior we had prior to the fix, while still allowing us to avoid the deadlock that was fixed by Filipe. I redid the users original test and got the following results on one of our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive) 5.9 0m54.258s 5.10 1m26.212s 5.10+patch 0m38.800s 5.10+patch is significantly faster than plain 5.9 because of my patch series "Change data reservations to use the ticketing infra" which contained the patch that introduced the regression, but generally improved the overall ENOSPC flushing mechanisms. Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm the results: 5.10.5 4m00s 5.10.5+patch 1m08s 5.11-rc2 5m14s 5.11-rc2+patch 1m30s Reported-by: René Rebe <rene@exactcode.de> Fixes: 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") CC: stable@vger.kernel.org # 5.10 Signed-off-by: Josef Bacik <josef@toxicpanda.com> Tested-by: David Sterba <dsterba@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add my test results ] Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-08 06:08:30 +08:00
btrfs_start_delalloc_roots(fs_info, nr_pages, true);
btrfs: wait on async extents when flushing delalloc I've been debugging an early ENOSPC problem in production and finally root caused it to this problem. When we switched to the per-inode in 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") I pulled out the async extent handling, because we were doing the correct thing by calling filemap_flush() if we had async extents set. This would properly wait on any async extents by locking the page in the second flush, thus making sure our ordered extents were properly set up. However when I switched us back to page based flushing, I used sync_inode(), which allows us to pass in our own wbc. The problem here is that sync_inode() is smarter than the filemap_* helpers, it tries to avoid calling writepages at all. This means that our second call could skip calling do_writepages altogether, and thus not wait on the pagelock for the async helpers. This means we could come back before any ordered extents were created and then simply continue on in our flushing mechanisms and ENOSPC out when we have plenty of space to use. Fix this by putting back the async pages logic in shrink_delalloc. This allows us to bulk write out everything that we need to, and then we can wait in one place for the async helpers to catch up, and then wait on any ordered extents that are created. Fixes: e076ab2a2ca7 ("btrfs: shrink delalloc pages instead of full inodes") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:21 +08:00
/*
* We need to make sure any outstanding async pages are now
* processed before we continue. This is because things like
* sync_inode() try to be smart and skip writing if the inode is
* marked clean. We don't use filemap_fwrite for flushing
* because we want to control how many pages we write out at a
* time, thus this is the only safe way to make sure we've
* waited for outstanding compressed workers to have started
* their jobs and thus have ordered extents set up properly.
*
* This exists because we do not want to wait for each
* individual inode to finish its async work, we simply want to
* start the IO on everybody, and then come back here and wait
* for all of the async work to catch up. Once we're done with
* that we know we'll have ordered extents for everything and we
* can decide if we wait for that or not.
*
* If we choose to replace this in the future, make absolutely
* sure that the proper waiting is being done in the async case,
* as there have been bugs in that area before.
*/
async_pages = atomic_read(&fs_info->async_delalloc_pages);
if (!async_pages)
goto skip_async;
/*
* We don't want to wait forever, if we wrote less pages in this
* loop than we have outstanding, only wait for that number of
* pages, otherwise we can wait for all async pages to finish
* before continuing.
*/
if (async_pages > nr_pages)
async_pages -= nr_pages;
else
async_pages = 0;
wait_event(fs_info->async_submit_wait,
atomic_read(&fs_info->async_delalloc_pages) <=
async_pages);
skip_async:
loops++;
if (wait_ordered && !trans) {
btrfs_wait_ordered_roots(fs_info, items, 0, (u64)-1);
} else {
time_left = schedule_timeout_killable(1);
if (time_left)
break;
}
/*
* If we are for preemption we just want a one-shot of delalloc
* flushing so we can stop flushing if we decide we don't need
* to anymore.
*/
if (for_preempt)
break;
spin_lock(&space_info->lock);
if (list_empty(&space_info->tickets) &&
list_empty(&space_info->priority_tickets)) {
spin_unlock(&space_info->lock);
break;
}
spin_unlock(&space_info->lock);
delalloc_bytes = percpu_counter_sum_positive(
&fs_info->delalloc_bytes);
ordered_bytes = percpu_counter_sum_positive(
&fs_info->ordered_bytes);
}
}
/*
* Try to flush some data based on policy set by @state. This is only advisory
* and may fail for various reasons. The caller is supposed to examine the
* state of @space_info to detect the outcome.
*/
static void flush_space(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info, u64 num_bytes,
enum btrfs_flush_state state, bool for_preempt)
{
struct btrfs_root *root = fs_info->tree_root;
struct btrfs_trans_handle *trans;
int nr;
int ret = 0;
switch (state) {
case FLUSH_DELAYED_ITEMS_NR:
case FLUSH_DELAYED_ITEMS:
if (state == FLUSH_DELAYED_ITEMS_NR)
nr = calc_reclaim_items_nr(fs_info, num_bytes) * 2;
else
nr = -1;
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
break;
}
ret = btrfs_run_delayed_items_nr(trans, nr);
btrfs_end_transaction(trans);
break;
case FLUSH_DELALLOC:
case FLUSH_DELALLOC_WAIT:
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
case FLUSH_DELALLOC_FULL:
if (state == FLUSH_DELALLOC_FULL)
num_bytes = U64_MAX;
shrink_delalloc(fs_info, space_info, num_bytes,
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
state != FLUSH_DELALLOC, for_preempt);
break;
case FLUSH_DELAYED_REFS_NR:
case FLUSH_DELAYED_REFS:
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
break;
}
if (state == FLUSH_DELAYED_REFS_NR)
nr = calc_reclaim_items_nr(fs_info, num_bytes);
else
nr = 0;
btrfs_run_delayed_refs(trans, nr);
btrfs_end_transaction(trans);
break;
case ALLOC_CHUNK:
case ALLOC_CHUNK_FORCE:
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
break;
}
ret = btrfs_chunk_alloc(trans,
btrfs_get_alloc_profile(fs_info, space_info->flags),
(state == ALLOC_CHUNK) ? CHUNK_ALLOC_NO_FORCE :
CHUNK_ALLOC_FORCE);
btrfs_end_transaction(trans);
if (ret > 0 || ret == -ENOSPC)
ret = 0;
break;
case RUN_DELAYED_IPUTS:
/*
* If we have pending delayed iputs then we could free up a
* bunch of pinned space, so make sure we run the iputs before
* we do our pinned bytes check below.
*/
btrfs_run_delayed_iputs(fs_info);
btrfs_wait_on_delayed_iputs(fs_info);
break;
case COMMIT_TRANS:
btrfs: rip out may_commit_transaction may_commit_transaction was introduced before the ticketing infrastructure existed. There was a problem where we'd legitimately be out of space, but every reservation would trigger a transaction commit and then fail. Thus if you had 1000 things trying to make a reservation, they'd all do the flushing loop and thus commit the transaction 1000 times before they'd get their ENOSPC. This helper was introduced to short circuit this, if there wasn't space that could be reclaimed by committing the transaction then simply ENOSPC out. This made true ENOSPC tests much faster as we didn't waste a bunch of time. However many of our bugs over the years have been from cases where we didn't account for some space that would be reclaimed by committing a transaction. The delayed refs rsv space, delayed rsv, many pinned bytes miscalculations, etc. And in the meantime the original problem has been solved with ticketing. We no longer will commit the transaction 1000 times. Instead we'll get 1000 waiters, we will go through the flushing mechanisms, and if there's no progress after 2 loops we ENOSPC everybody out. The ticketing infrastructure gives us a deterministic way to see if we're making progress or not, thus we avoid a lot of extra work. So simplify this step by simply unconditionally committing the transaction. This removes what is arguably our most common source of early ENOSPC bugs and will allow us to drastically simplify many of the things we track because we simply won't need them with this stuff gone. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22 20:51:58 +08:00
ASSERT(current->journal_info == NULL);
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
break;
}
ret = btrfs_commit_transaction(trans);
break;
default:
ret = -ENOSPC;
break;
}
trace_btrfs_flush_space(fs_info, space_info->flags, num_bytes, state,
ret, for_preempt);
return;
}
static inline u64
btrfs_calc_reclaim_metadata_size(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
u64 used;
u64 avail;
u64 total;
u64 to_reclaim = space_info->reclaim_size;
lockdep_assert_held(&space_info->lock);
avail = calc_available_free_space(fs_info, space_info,
BTRFS_RESERVE_FLUSH_ALL);
used = btrfs_space_info_used(space_info, true);
/*
* We may be flushing because suddenly we have less space than we had
* before, and now we're well over-committed based on our current free
* space. If that's the case add in our overage so we make sure to put
* appropriate pressure on the flushing state machine.
*/
total = writable_total_bytes(fs_info, space_info);
if (total + avail < used)
to_reclaim += used - (total + avail);
return to_reclaim;
}
static bool need_preemptive_reclaim(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
u64 global_rsv_size = fs_info->global_block_rsv.reserved;
u64 ordered, delalloc;
u64 total = writable_total_bytes(fs_info, space_info);
u64 thresh;
u64 used;
thresh = div_factor_fine(total, 90);
lockdep_assert_held(&space_info->lock);
/* If we're just plain full then async reclaim just slows us down. */
if ((space_info->bytes_used + space_info->bytes_reserved +
global_rsv_size) >= thresh)
return false;
used = space_info->bytes_may_use + space_info->bytes_pinned;
/* The total flushable belongs to the global rsv, don't flush. */
if (global_rsv_size >= used)
return false;
/*
* 128MiB is 1/4 of the maximum global rsv size. If we have less than
* that devoted to other reservations then there's no sense in flushing,
* we don't have a lot of things that need flushing.
*/
if (used - global_rsv_size <= SZ_128M)
return false;
/*
* We have tickets queued, bail so we don't compete with the async
* flushers.
*/
if (space_info->reclaim_size)
return false;
/*
* If we have over half of the free space occupied by reservations or
* pinned then we want to start flushing.
*
* We do not do the traditional thing here, which is to say
*
* if (used >= ((total_bytes + avail) / 2))
* return 1;
*
* because this doesn't quite work how we want. If we had more than 50%
* of the space_info used by bytes_used and we had 0 available we'd just
* constantly run the background flusher. Instead we want it to kick in
* if our reclaimable space exceeds our clamped free space.
*
* Our clamping range is 2^1 -> 2^8. Practically speaking that means
* the following:
*
* Amount of RAM Minimum threshold Maximum threshold
*
* 256GiB 1GiB 128GiB
* 128GiB 512MiB 64GiB
* 64GiB 256MiB 32GiB
* 32GiB 128MiB 16GiB
* 16GiB 64MiB 8GiB
*
* These are the range our thresholds will fall in, corresponding to how
* much delalloc we need for the background flusher to kick in.
*/
thresh = calc_available_free_space(fs_info, space_info,
BTRFS_RESERVE_FLUSH_ALL);
used = space_info->bytes_used + space_info->bytes_reserved +
space_info->bytes_readonly + global_rsv_size;
if (used < total)
thresh += total - used;
thresh >>= space_info->clamp;
used = space_info->bytes_pinned;
/*
* If we have more ordered bytes than delalloc bytes then we're either
* doing a lot of DIO, or we simply don't have a lot of delalloc waiting
* around. Preemptive flushing is only useful in that it can free up
* space before tickets need to wait for things to finish. In the case
* of ordered extents, preemptively waiting on ordered extents gets us
* nothing, if our reservations are tied up in ordered extents we'll
* simply have to slow down writers by forcing them to wait on ordered
* extents.
*
* In the case that ordered is larger than delalloc, only include the
* block reserves that we would actually be able to directly reclaim
* from. In this case if we're heavy on metadata operations this will
* clearly be heavy enough to warrant preemptive flushing. In the case
* of heavy DIO or ordered reservations, preemptive flushing will just
* waste time and cause us to slow down.
*
* We want to make sure we truly are maxed out on ordered however, so
* cut ordered in half, and if it's still higher than delalloc then we
* can keep flushing. This is to avoid the case where we start
* flushing, and now delalloc == ordered and we stop preemptively
* flushing when we could still have several gigs of delalloc to flush.
*/
ordered = percpu_counter_read_positive(&fs_info->ordered_bytes) >> 1;
btrfs: use percpu_read_positive instead of sum_positive for need_preempt Looking at perf data for a fio workload I noticed that we were spending a pretty large chunk of time (around 5%) doing percpu_counter_sum() in need_preemptive_reclaim. This is silly, as we only want to know if we have more ordered than delalloc to see if we should be counting the delayed items in our threshold calculation. Change this to percpu_read_positive() to avoid the overhead. I ran this through fsperf to validate the changes, obviously the latency numbers in dbench and fio are quite jittery, so take them as you wish, but overall the improvements on throughput, iops, and bw are all positive. Each test was run two times, the given value is the average of both runs for their respective column. btrfs ssd normal test results bufferedrandwrite16g results metric baseline current diff ========================================================== write_io_kbytes 16777216 16777216 0.00% read_clat_ns_p99 0 0 0.00% write_bw_bytes 1.04e+08 1.05e+08 1.12% read_iops 0 0 0.00% write_clat_ns_p50 13888 11840 -14.75% read_io_kbytes 0 0 0.00% read_io_bytes 0 0 0.00% write_clat_ns_p99 35008 29312 -16.27% read_bw_bytes 0 0 0.00% elapsed 170 167 -1.76% write_lat_ns_min 4221.50 3762.50 -10.87% sys_cpu 39.65 35.37 -10.79% write_lat_ns_max 2.67e+10 2.50e+10 -6.63% read_lat_ns_min 0 0 0.00% write_iops 25270.10 25553.43 1.12% read_lat_ns_max 0 0 0.00% read_clat_ns_p50 0 0 0.00% dbench60 results metric baseline current diff ================================================== qpathinfo 11.12 12.73 14.52% throughput 416.09 445.66 7.11% flush 3485.63 1887.55 -45.85% qfileinfo 0.70 1.92 173.86% ntcreatex 992.60 695.76 -29.91% qfsinfo 2.43 3.71 52.48% close 1.67 3.14 88.09% sfileinfo 66.54 105.20 58.10% rename 809.23 619.59 -23.43% find 16.88 15.46 -8.41% unlink 820.54 670.86 -18.24% writex 3375.20 2637.91 -21.84% deltree 386.33 449.98 16.48% readx 3.43 3.41 -0.60% mkdir 0.05 0.03 -38.46% lockx 0.26 0.26 -0.76% unlockx 0.81 0.32 -60.33% dio4kbs16threads results metric baseline current diff ================================================================ write_io_kbytes 5249676 3357150 -36.05% read_clat_ns_p99 0 0 0.00% write_bw_bytes 89583501.50 57291192.50 -36.05% read_iops 0 0 0.00% write_clat_ns_p50 242688 263680 8.65% read_io_kbytes 0 0 0.00% read_io_bytes 0 0 0.00% write_clat_ns_p99 15826944 36732928 132.09% read_bw_bytes 0 0 0.00% elapsed 61 61 0.00% write_lat_ns_min 42704 42095 -1.43% sys_cpu 5.27 3.45 -34.52% write_lat_ns_max 7.43e+08 9.27e+08 24.71% read_lat_ns_min 0 0 0.00% write_iops 21870.97 13987.11 -36.05% read_lat_ns_max 0 0 0.00% read_clat_ns_p50 0 0 0.00% randwrite2xram results metric baseline current diff ================================================================ write_io_kbytes 24831972 28876262 16.29% read_clat_ns_p99 0 0 0.00% write_bw_bytes 83745273.50 92182192.50 10.07% read_iops 0 0 0.00% write_clat_ns_p50 13952 11648 -16.51% read_io_kbytes 0 0 0.00% read_io_bytes 0 0 0.00% write_clat_ns_p99 50176 52992 5.61% read_bw_bytes 0 0 0.00% elapsed 314 332 5.73% write_lat_ns_min 5920.50 5127 -13.40% sys_cpu 7.82 7.35 -6.07% write_lat_ns_max 5.27e+10 3.88e+10 -26.44% read_lat_ns_min 0 0 0.00% write_iops 20445.62 22505.42 10.07% read_lat_ns_max 0 0 0.00% read_clat_ns_p50 0 0 0.00% untarfirefox results metric baseline current diff ============================================== elapsed 47.41 47.40 -0.03% Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-24 21:44:21 +08:00
delalloc = percpu_counter_read_positive(&fs_info->delalloc_bytes);
if (ordered >= delalloc)
used += fs_info->delayed_refs_rsv.reserved +
fs_info->delayed_block_rsv.reserved;
else
used += space_info->bytes_may_use - global_rsv_size;
return (used >= thresh && !btrfs_fs_closing(fs_info) &&
!test_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state));
}
static bool steal_from_global_rsv(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
struct reserve_ticket *ticket)
{
struct btrfs_block_rsv *global_rsv = &fs_info->global_block_rsv;
u64 min_bytes;
if (!ticket->steal)
return false;
if (global_rsv->space_info != space_info)
return false;
spin_lock(&global_rsv->lock);
min_bytes = div_factor(global_rsv->size, 1);
if (global_rsv->reserved < min_bytes + ticket->bytes) {
spin_unlock(&global_rsv->lock);
return false;
}
global_rsv->reserved -= ticket->bytes;
btrfs: fix reclaim_size counter leak after stealing from global reserve Commit 7f9fe614407692 ("btrfs: improve global reserve stealing logic"), added in the 5.8 merge window, introduced another leak for the space_info's reclaim_size counter. This is very often triggered by the test cases generic/269 and generic/416 from fstests, producing a stack trace like the following during unmount: [37079.155499] ------------[ cut here ]------------ [37079.156844] WARNING: CPU: 2 PID: 2000423 at fs/btrfs/block-group.c:3422 btrfs_free_block_groups+0x2eb/0x300 [btrfs] [37079.158090] Modules linked in: dm_snapshot btrfs dm_thin_pool (...) [37079.164440] CPU: 2 PID: 2000423 Comm: umount Tainted: G W 5.7.0-rc7-btrfs-next-62 #1 [37079.165422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) [37079.167384] RIP: 0010:btrfs_free_block_groups+0x2eb/0x300 [btrfs] [37079.168375] Code: bd 58 ff ff ff 00 4c 8d (...) [37079.170199] RSP: 0018:ffffaa53875c7de0 EFLAGS: 00010206 [37079.171120] RAX: ffff98099e701cf8 RBX: ffff98099e2d4000 RCX: 0000000000000000 [37079.172057] RDX: 0000000000000001 RSI: ffffffffc0acc5b1 RDI: 00000000ffffffff [37079.173002] RBP: ffff98099e701cf8 R08: 0000000000000000 R09: 0000000000000000 [37079.173886] R10: 0000000000000000 R11: 0000000000000000 R12: ffff98099e701c00 [37079.174730] R13: ffff98099e2d5100 R14: dead000000000122 R15: dead000000000100 [37079.175578] FS: 00007f4d7d0a5840(0000) GS:ffff9809ec600000(0000) knlGS:0000000000000000 [37079.176434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [37079.177289] CR2: 0000559224dcc000 CR3: 000000012207a004 CR4: 00000000003606e0 [37079.178152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37079.178935] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [37079.179675] Call Trace: [37079.180419] close_ctree+0x291/0x2d1 [btrfs] [37079.181162] generic_shutdown_super+0x6c/0x100 [37079.181898] kill_anon_super+0x14/0x30 [37079.182641] btrfs_kill_super+0x12/0x20 [btrfs] [37079.183371] deactivate_locked_super+0x31/0x70 [37079.184012] cleanup_mnt+0x100/0x160 [37079.184650] task_work_run+0x68/0xb0 [37079.185284] exit_to_usermode_loop+0xf9/0x100 [37079.185920] do_syscall_64+0x20d/0x260 [37079.186556] entry_SYSCALL_64_after_hwframe+0x49/0xb3 [37079.187197] RIP: 0033:0x7f4d7d2d9357 [37079.187836] Code: eb 0b 00 f7 d8 64 89 01 48 (...) [37079.189180] RSP: 002b:00007ffee4e0d368 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [37079.189845] RAX: 0000000000000000 RBX: 00007f4d7d3fb224 RCX: 00007f4d7d2d9357 [37079.190515] RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000559224dc5c90 [37079.191173] RBP: 0000559224dc1970 R08: 0000000000000000 R09: 00007ffee4e0c0e0 [37079.191815] R10: 0000559224dc7b00 R11: 0000000000000246 R12: 0000000000000000 [37079.192451] R13: 0000559224dc5c90 R14: 0000559224dc1a80 R15: 0000559224dc1ba0 [37079.193096] irq event stamp: 0 [37079.193729] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [37079.194379] hardirqs last disabled at (0): [<ffffffff97ab8935>] copy_process+0x755/0x1ea0 [37079.195033] softirqs last enabled at (0): [<ffffffff97ab8935>] copy_process+0x755/0x1ea0 [37079.195700] softirqs last disabled at (0): [<0000000000000000>] 0x0 [37079.196318] ---[ end trace b32710d864dea887 ]--- In the past commit d611add48b717a ("btrfs: fix reclaim counter leak of space_info objects") fixed similar cases. That commit however has a date more recent (April 7 2020) then the commit mentioned before (March 13 2020), however it was merged in kernel 5.7 while the older commit, which introduces a new leak, was merged only in the 5.8 merge window. So the leak sneaked in unnoticed. Fix this by making steal_from_global_rsv() remove the ticket using the helper remove_ticket(), which decrements the reclaim_size counter of the space_info object. Fixes: 7f9fe614407692 ("btrfs: improve global reserve stealing logic") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-27 18:40:44 +08:00
remove_ticket(space_info, ticket);
ticket->bytes = 0;
wake_up(&ticket->wait);
space_info->tickets_id++;
if (global_rsv->reserved < global_rsv->size)
global_rsv->full = 0;
spin_unlock(&global_rsv->lock);
return true;
}
/*
* maybe_fail_all_tickets - we've exhausted our flushing, start failing tickets
* @fs_info - fs_info for this fs
* @space_info - the space info we were flushing
*
* We call this when we've exhausted our flushing ability and haven't made
* progress in satisfying tickets. The reservation code handles tickets in
* order, so if there is a large ticket first and then smaller ones we could
* very well satisfy the smaller tickets. This will attempt to wake up any
* tickets in the list to catch this case.
*
* This function returns true if it was able to make progress by clearing out
* other tickets, or if it stumbles across a ticket that was smaller than the
* first ticket.
*/
static bool maybe_fail_all_tickets(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
struct reserve_ticket *ticket;
u64 tickets_id = space_info->tickets_id;
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
const bool aborted = BTRFS_FS_ERROR(fs_info);
trace_btrfs_fail_all_tickets(fs_info, space_info);
if (btrfs_test_opt(fs_info, ENOSPC_DEBUG)) {
btrfs_info(fs_info, "cannot satisfy tickets, dumping space info");
__btrfs_dump_space_info(fs_info, space_info);
}
while (!list_empty(&space_info->tickets) &&
tickets_id == space_info->tickets_id) {
ticket = list_first_entry(&space_info->tickets,
struct reserve_ticket, list);
if (!aborted && steal_from_global_rsv(fs_info, space_info, ticket))
return true;
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
if (!aborted && btrfs_test_opt(fs_info, ENOSPC_DEBUG))
btrfs_info(fs_info, "failing ticket with %llu bytes",
ticket->bytes);
remove_ticket(space_info, ticket);
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
if (aborted)
ticket->error = -EIO;
else
ticket->error = -ENOSPC;
wake_up(&ticket->wait);
/*
* We're just throwing tickets away, so more flushing may not
* trip over btrfs_try_granting_tickets, so we need to call it
* here to see if we can make progress with the next ticket in
* the list.
*/
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
if (!aborted)
btrfs_try_granting_tickets(fs_info, space_info);
}
return (tickets_id != space_info->tickets_id);
}
/*
* This is for normal flushers, we can wait all goddamned day if we want to. We
* will loop and continuously try to flush as long as we are making progress.
* We count progress as clearing off tickets each time we have to loop.
*/
static void btrfs_async_reclaim_metadata_space(struct work_struct *work)
{
struct btrfs_fs_info *fs_info;
struct btrfs_space_info *space_info;
u64 to_reclaim;
enum btrfs_flush_state flush_state;
int commit_cycles = 0;
u64 last_tickets_id;
fs_info = container_of(work, struct btrfs_fs_info, async_reclaim_work);
space_info = btrfs_find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
spin_lock(&space_info->lock);
to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info, space_info);
if (!to_reclaim) {
space_info->flush = 0;
spin_unlock(&space_info->lock);
return;
}
last_tickets_id = space_info->tickets_id;
spin_unlock(&space_info->lock);
flush_state = FLUSH_DELAYED_ITEMS_NR;
do {
flush_space(fs_info, space_info, to_reclaim, flush_state, false);
spin_lock(&space_info->lock);
if (list_empty(&space_info->tickets)) {
space_info->flush = 0;
spin_unlock(&space_info->lock);
return;
}
to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info,
space_info);
if (last_tickets_id == space_info->tickets_id) {
flush_state++;
} else {
last_tickets_id = space_info->tickets_id;
flush_state = FLUSH_DELAYED_ITEMS_NR;
if (commit_cycles)
commit_cycles--;
}
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
/*
* We do not want to empty the system of delalloc unless we're
* under heavy pressure, so allow one trip through the flushing
* logic before we start doing a FLUSH_DELALLOC_FULL.
*/
if (flush_state == FLUSH_DELALLOC_FULL && !commit_cycles)
flush_state++;
/*
* We don't want to force a chunk allocation until we've tried
* pretty hard to reclaim space. Think of the case where we
* freed up a bunch of space and so have a lot of pinned space
* to reclaim. We would rather use that than possibly create a
* underutilized metadata chunk. So if this is our first run
* through the flushing state machine skip ALLOC_CHUNK_FORCE and
* commit the transaction. If nothing has changed the next go
* around then we can force a chunk allocation.
*/
if (flush_state == ALLOC_CHUNK_FORCE && !commit_cycles)
flush_state++;
if (flush_state > COMMIT_TRANS) {
commit_cycles++;
if (commit_cycles > 2) {
if (maybe_fail_all_tickets(fs_info, space_info)) {
flush_state = FLUSH_DELAYED_ITEMS_NR;
commit_cycles--;
} else {
space_info->flush = 0;
}
} else {
flush_state = FLUSH_DELAYED_ITEMS_NR;
}
}
spin_unlock(&space_info->lock);
} while (flush_state <= COMMIT_TRANS);
}
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
/*
* This handles pre-flushing of metadata space before we get to the point that
* we need to start blocking threads on tickets. The logic here is different
* from the other flush paths because it doesn't rely on tickets to tell us how
* much we need to flush, instead it attempts to keep us below the 80% full
* watermark of space by flushing whichever reservation pool is currently the
* largest.
*/
static void btrfs_preempt_reclaim_metadata_space(struct work_struct *work)
{
struct btrfs_fs_info *fs_info;
struct btrfs_space_info *space_info;
struct btrfs_block_rsv *delayed_block_rsv;
struct btrfs_block_rsv *delayed_refs_rsv;
struct btrfs_block_rsv *global_rsv;
struct btrfs_block_rsv *trans_rsv;
int loops = 0;
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
fs_info = container_of(work, struct btrfs_fs_info,
preempt_reclaim_work);
space_info = btrfs_find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
delayed_block_rsv = &fs_info->delayed_block_rsv;
delayed_refs_rsv = &fs_info->delayed_refs_rsv;
global_rsv = &fs_info->global_block_rsv;
trans_rsv = &fs_info->trans_block_rsv;
spin_lock(&space_info->lock);
while (need_preemptive_reclaim(fs_info, space_info)) {
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
enum btrfs_flush_state flush;
u64 delalloc_size = 0;
u64 to_reclaim, block_rsv_size;
u64 global_rsv_size = global_rsv->reserved;
loops++;
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
/*
* We don't have a precise counter for the metadata being
* reserved for delalloc, so we'll approximate it by subtracting
* out the block rsv's space from the bytes_may_use. If that
* amount is higher than the individual reserves, then we can
* assume it's tied up in delalloc reservations.
*/
block_rsv_size = global_rsv_size +
delayed_block_rsv->reserved +
delayed_refs_rsv->reserved +
trans_rsv->reserved;
if (block_rsv_size < space_info->bytes_may_use)
delalloc_size = space_info->bytes_may_use - block_rsv_size;
/*
* We don't want to include the global_rsv in our calculation,
* because that's space we can't touch. Subtract it from the
* block_rsv_size for the next checks.
*/
block_rsv_size -= global_rsv_size;
/*
* We really want to avoid flushing delalloc too much, as it
* could result in poor allocation patterns, so only flush it if
* it's larger than the rest of the pools combined.
*/
if (delalloc_size > block_rsv_size) {
to_reclaim = delalloc_size;
flush = FLUSH_DELALLOC;
} else if (space_info->bytes_pinned >
(delayed_block_rsv->reserved +
delayed_refs_rsv->reserved)) {
to_reclaim = space_info->bytes_pinned;
btrfs: rip out may_commit_transaction may_commit_transaction was introduced before the ticketing infrastructure existed. There was a problem where we'd legitimately be out of space, but every reservation would trigger a transaction commit and then fail. Thus if you had 1000 things trying to make a reservation, they'd all do the flushing loop and thus commit the transaction 1000 times before they'd get their ENOSPC. This helper was introduced to short circuit this, if there wasn't space that could be reclaimed by committing the transaction then simply ENOSPC out. This made true ENOSPC tests much faster as we didn't waste a bunch of time. However many of our bugs over the years have been from cases where we didn't account for some space that would be reclaimed by committing a transaction. The delayed refs rsv space, delayed rsv, many pinned bytes miscalculations, etc. And in the meantime the original problem has been solved with ticketing. We no longer will commit the transaction 1000 times. Instead we'll get 1000 waiters, we will go through the flushing mechanisms, and if there's no progress after 2 loops we ENOSPC everybody out. The ticketing infrastructure gives us a deterministic way to see if we're making progress or not, thus we avoid a lot of extra work. So simplify this step by simply unconditionally committing the transaction. This removes what is arguably our most common source of early ENOSPC bugs and will allow us to drastically simplify many of the things we track because we simply won't need them with this stuff gone. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22 20:51:58 +08:00
flush = COMMIT_TRANS;
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
} else if (delayed_block_rsv->reserved >
delayed_refs_rsv->reserved) {
to_reclaim = delayed_block_rsv->reserved;
flush = FLUSH_DELAYED_ITEMS_NR;
} else {
to_reclaim = delayed_refs_rsv->reserved;
flush = FLUSH_DELAYED_REFS_NR;
}
spin_unlock(&space_info->lock);
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
/*
* We don't want to reclaim everything, just a portion, so scale
* down the to_reclaim by 1/4. If it takes us down to 0,
* reclaim 1 items worth.
*/
to_reclaim >>= 2;
if (!to_reclaim)
to_reclaim = btrfs_calc_insert_metadata_size(fs_info, 1);
flush_space(fs_info, space_info, to_reclaim, flush, true);
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
cond_resched();
spin_lock(&space_info->lock);
}
/* We only went through once, back off our clamping. */
if (loops == 1 && !space_info->reclaim_size)
space_info->clamp = max(1, space_info->clamp - 1);
trace_btrfs_done_preemptive_reclaim(fs_info, space_info);
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
spin_unlock(&space_info->lock);
}
/*
* FLUSH_DELALLOC_WAIT:
* Space is freed from flushing delalloc in one of two ways.
*
* 1) compression is on and we allocate less space than we reserved
* 2) we are overwriting existing space
*
* For #1 that extra space is reclaimed as soon as the delalloc pages are
* COWed, by way of btrfs_add_reserved_bytes() which adds the actual extent
* length to ->bytes_reserved, and subtracts the reserved space from
* ->bytes_may_use.
*
* For #2 this is trickier. Once the ordered extent runs we will drop the
* extent in the range we are overwriting, which creates a delayed ref for
* that freed extent. This however is not reclaimed until the transaction
* commits, thus the next stages.
*
* RUN_DELAYED_IPUTS
* If we are freeing inodes, we want to make sure all delayed iputs have
* completed, because they could have been on an inode with i_nlink == 0, and
* thus have been truncated and freed up space. But again this space is not
* immediately re-usable, it comes in the form of a delayed ref, which must be
* run and then the transaction must be committed.
*
* COMMIT_TRANS
btrfs: rip out may_commit_transaction may_commit_transaction was introduced before the ticketing infrastructure existed. There was a problem where we'd legitimately be out of space, but every reservation would trigger a transaction commit and then fail. Thus if you had 1000 things trying to make a reservation, they'd all do the flushing loop and thus commit the transaction 1000 times before they'd get their ENOSPC. This helper was introduced to short circuit this, if there wasn't space that could be reclaimed by committing the transaction then simply ENOSPC out. This made true ENOSPC tests much faster as we didn't waste a bunch of time. However many of our bugs over the years have been from cases where we didn't account for some space that would be reclaimed by committing a transaction. The delayed refs rsv space, delayed rsv, many pinned bytes miscalculations, etc. And in the meantime the original problem has been solved with ticketing. We no longer will commit the transaction 1000 times. Instead we'll get 1000 waiters, we will go through the flushing mechanisms, and if there's no progress after 2 loops we ENOSPC everybody out. The ticketing infrastructure gives us a deterministic way to see if we're making progress or not, thus we avoid a lot of extra work. So simplify this step by simply unconditionally committing the transaction. This removes what is arguably our most common source of early ENOSPC bugs and will allow us to drastically simplify many of the things we track because we simply won't need them with this stuff gone. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22 20:51:58 +08:00
* This is where we reclaim all of the pinned space generated by running the
* iputs
*
* ALLOC_CHUNK_FORCE
* For data we start with alloc chunk force, however we could have been full
* before, and then the transaction commit could have freed new block groups,
* so if we now have space to allocate do the force chunk allocation.
*/
static const enum btrfs_flush_state data_flush_states[] = {
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
FLUSH_DELALLOC_FULL,
RUN_DELAYED_IPUTS,
COMMIT_TRANS,
ALLOC_CHUNK_FORCE,
};
static void btrfs_async_reclaim_data_space(struct work_struct *work)
{
struct btrfs_fs_info *fs_info;
struct btrfs_space_info *space_info;
u64 last_tickets_id;
enum btrfs_flush_state flush_state = 0;
fs_info = container_of(work, struct btrfs_fs_info, async_data_reclaim_work);
space_info = fs_info->data_sinfo;
spin_lock(&space_info->lock);
if (list_empty(&space_info->tickets)) {
space_info->flush = 0;
spin_unlock(&space_info->lock);
return;
}
last_tickets_id = space_info->tickets_id;
spin_unlock(&space_info->lock);
while (!space_info->full) {
flush_space(fs_info, space_info, U64_MAX, ALLOC_CHUNK_FORCE, false);
spin_lock(&space_info->lock);
if (list_empty(&space_info->tickets)) {
space_info->flush = 0;
spin_unlock(&space_info->lock);
return;
}
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
/* Something happened, fail everything and bail. */
if (BTRFS_FS_ERROR(fs_info))
goto aborted_fs;
last_tickets_id = space_info->tickets_id;
spin_unlock(&space_info->lock);
}
while (flush_state < ARRAY_SIZE(data_flush_states)) {
flush_space(fs_info, space_info, U64_MAX,
data_flush_states[flush_state], false);
spin_lock(&space_info->lock);
if (list_empty(&space_info->tickets)) {
space_info->flush = 0;
spin_unlock(&space_info->lock);
return;
}
if (last_tickets_id == space_info->tickets_id) {
flush_state++;
} else {
last_tickets_id = space_info->tickets_id;
flush_state = 0;
}
if (flush_state >= ARRAY_SIZE(data_flush_states)) {
if (space_info->full) {
if (maybe_fail_all_tickets(fs_info, space_info))
flush_state = 0;
else
space_info->flush = 0;
} else {
flush_state = 0;
}
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
/* Something happened, fail everything and bail. */
if (BTRFS_FS_ERROR(fs_info))
goto aborted_fs;
}
spin_unlock(&space_info->lock);
}
btrfs: do not infinite loop in data reclaim if we aborted Error injection stressing uncovered a busy loop in our data reclaim loop. There are two cases here, one where we loop creating block groups until space_info->full is set, or in the main loop we will skip erroring out any tickets if space_info->full == 0. Unfortunately if we aborted the transaction then we will never allocate chunks or reclaim any space and thus never get ->full, and you'll see stack traces like this: watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [kworker/u4:4:139] CPU: 0 PID: 139 Comm: kworker/u4:4 Tainted: G W 5.13.0-rc1+ #328 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space RIP: 0010:btrfs_join_transaction+0x12/0x20 RSP: 0018:ffffb2b780b77de0 EFLAGS: 00000246 RAX: ffffb2b781863d58 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000801 RSI: ffff987952b57400 RDI: ffff987940aa3000 RBP: ffff987954d55000 R08: 0000000000000001 R09: ffff98795539e8f0 R10: 000000000000000f R11: 000000000000000f R12: ffffffffffffffff R13: ffff987952b574c8 R14: ffff987952b57400 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff9879bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0703da4000 CR3: 0000000113398004 CR4: 0000000000370ef0 Call Trace: flush_space+0x4a8/0x660 btrfs_async_reclaim_data_space+0x55/0x130 process_one_work+0x1e9/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fix this by checking to see if we have a btrfs fs error in either of the reclaim loops, and if so fail the tickets and bail. In addition to this, fix maybe_fail_all_tickets() to not try to grant tickets if we've aborted, simply fail everything. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-06 04:35:26 +08:00
return;
aborted_fs:
maybe_fail_all_tickets(fs_info, space_info);
space_info->flush = 0;
spin_unlock(&space_info->lock);
}
void btrfs_init_async_reclaim_work(struct btrfs_fs_info *fs_info)
{
INIT_WORK(&fs_info->async_reclaim_work, btrfs_async_reclaim_metadata_space);
INIT_WORK(&fs_info->async_data_reclaim_work, btrfs_async_reclaim_data_space);
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
INIT_WORK(&fs_info->preempt_reclaim_work,
btrfs_preempt_reclaim_metadata_space);
}
static const enum btrfs_flush_state priority_flush_states[] = {
FLUSH_DELAYED_ITEMS_NR,
FLUSH_DELAYED_ITEMS,
ALLOC_CHUNK,
};
static const enum btrfs_flush_state evict_flush_states[] = {
FLUSH_DELAYED_ITEMS_NR,
FLUSH_DELAYED_ITEMS,
FLUSH_DELAYED_REFS_NR,
FLUSH_DELAYED_REFS,
FLUSH_DELALLOC,
FLUSH_DELALLOC_WAIT,
btrfs: use delalloc_bytes to determine flush amount for shrink_delalloc We have been hitting some early ENOSPC issues in production with more recent kernels, and I tracked it down to us simply not flushing delalloc as aggressively as we should be. With tracing I was seeing us failing all tickets with all of the block rsvs at or around 0, with very little pinned space, but still around 120MiB of outstanding bytes_may_used. Upon further investigation I saw that we were flushing around 14 pages per shrink call for delalloc, despite having around 2GiB of delalloc outstanding. Consider the example of a 8 way machine, all CPUs trying to create a file in parallel, which at the time of this commit requires 5 items to do. Assuming a 16k leaf size, we have 10MiB of total metadata reclaim size waiting on reservations. Now assume we have 128MiB of delalloc outstanding. With our current math we would set items to 20, and then set to_reclaim to 20 * 256k, or 5MiB. Assuming that we went through this loop all 3 times, for both FLUSH_DELALLOC and FLUSH_DELALLOC_WAIT, and then did the full loop twice, we'd only flush 60MiB of the 128MiB delalloc space. This could leave a fair bit of delalloc reservations still hanging around by the time we go to ENOSPC out all the remaining tickets. Fix this two ways. First, change the calculations to be a fraction of the total delalloc bytes on the system. Prior to this change we were calculating based on dirty inodes so our math made more sense, now it's just completely unrelated to what we're actually doing. Second add a FLUSH_DELALLOC_FULL state, that we hold off until we've gone through the flush states at least once. This will empty the system of all delalloc so we're sure to be truly out of space when we start failing tickets. I'm tagging stable 5.10 and forward, because this is where we started using the page stuff heavily again. This affects earlier kernel versions as well, but would be a pain to backport to them as the flushing mechanisms aren't the same. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-15 02:47:20 +08:00
FLUSH_DELALLOC_FULL,
ALLOC_CHUNK,
COMMIT_TRANS,
};
static void priority_reclaim_metadata_space(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
struct reserve_ticket *ticket,
const enum btrfs_flush_state *states,
int states_nr)
{
u64 to_reclaim;
int flush_state = 0;
spin_lock(&space_info->lock);
to_reclaim = btrfs_calc_reclaim_metadata_size(fs_info, space_info);
/*
* This is the priority reclaim path, so to_reclaim could be >0 still
* because we may have only satisfied the priority tickets and still
* left non priority tickets on the list. We would then have
* to_reclaim but ->bytes == 0.
*/
if (ticket->bytes == 0) {
spin_unlock(&space_info->lock);
return;
}
while (flush_state < states_nr) {
spin_unlock(&space_info->lock);
flush_space(fs_info, space_info, to_reclaim, states[flush_state],
false);
flush_state++;
spin_lock(&space_info->lock);
if (ticket->bytes == 0) {
spin_unlock(&space_info->lock);
return;
}
}
/* Attempt to steal from the global rsv if we can. */
if (!steal_from_global_rsv(fs_info, space_info, ticket)) {
ticket->error = -ENOSPC;
remove_ticket(space_info, ticket);
}
/*
* We must run try_granting_tickets here because we could be a large
* ticket in front of a smaller ticket that can now be satisfied with
* the available space.
*/
btrfs_try_granting_tickets(fs_info, space_info);
spin_unlock(&space_info->lock);
}
static void priority_reclaim_data_space(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
struct reserve_ticket *ticket)
{
spin_lock(&space_info->lock);
/* We could have been granted before we got here. */
if (ticket->bytes == 0) {
spin_unlock(&space_info->lock);
return;
}
while (!space_info->full) {
spin_unlock(&space_info->lock);
flush_space(fs_info, space_info, U64_MAX, ALLOC_CHUNK_FORCE, false);
spin_lock(&space_info->lock);
if (ticket->bytes == 0) {
spin_unlock(&space_info->lock);
return;
}
}
ticket->error = -ENOSPC;
remove_ticket(space_info, ticket);
btrfs_try_granting_tickets(fs_info, space_info);
spin_unlock(&space_info->lock);
}
static void wait_reserve_ticket(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
struct reserve_ticket *ticket)
{
DEFINE_WAIT(wait);
int ret = 0;
spin_lock(&space_info->lock);
while (ticket->bytes > 0 && ticket->error == 0) {
ret = prepare_to_wait_event(&ticket->wait, &wait, TASK_KILLABLE);
if (ret) {
Btrfs: fix race leading to metadata space leak after task received signal When a task that is allocating metadata needs to wait for the async reclaim job to process its ticket and gets a signal (because it was killed for example) before doing the wait, the task ends up erroring out but with space reserved for its ticket, which never gets released, resulting in a metadata space leak (more specifically a leak in the bytes_may_use counter of the metadata space_info object). Here's the sequence of steps leading to the space leak: 1) A task tries to create a file for example, so it ends up trying to start a transaction at btrfs_create(); 2) The filesystem is currently in a state where there is not enough metadata free space to satisfy the transaction's needs. So at space-info.c:__reserve_metadata_bytes() we create a ticket and add it to the list of tickets of the space info object. Also, because the metadata async reclaim job is not running, we queue a job ro run metadata reclaim; 3) In the meanwhile the task receives a signal (like SIGTERM from a kill command for example); 4) After queing the async reclaim job, at __reserve_metadata_bytes(), we unlock the metadata space info and call handle_reserve_ticket(); 5) That last function calls wait_reserve_ticket(), which acquires the lock from the metadata space info. Then in the first iteration of its while loop, it calls prepare_to_wait_event(), which returns -ERESTARTSYS because the task has a pending signal. As a result, we set the error field of the ticket to -EINTR and exit the while loop without deleting the ticket from the list of tickets (in the space info object). After exiting the loop we unlock the space info; 6) The async reclaim job is able to release enough metadata, acquires the metadata space info's lock and then reserves space for the ticket, since the ticket is still in the list of (non-priority) tickets. The space reservation happens at btrfs_try_granting_tickets(), called from maybe_fail_all_tickets(). This increments the bytes_may_use counter from the metadata space info object, sets the ticket's bytes field to zero (meaning success, that space was reserved) and removes it from the list of tickets; 7) wait_reserve_ticket() returns, with the error field of the ticket set to -EINTR. Then handle_reserve_ticket() just propagates that error to the caller. Because an error was returned, the caller does not release the reserved space, since the expectation is that any error means no space was reserved. Fix this by removing the ticket from the list, while holding the space info lock, at wait_reserve_ticket() when prepare_to_wait_event() returns an error. Also add some comments and an assertion to guarantee we never end up with a ticket that has an error set and a bytes counter field set to zero, to more easily detect regressions in the future. This issue could be triggered sporadically by some test cases from fstests such as generic/269 for example, which tries to fill a filesystem and then kills fsstress processes running in the background. When this issue happens, we get a warning in syslog/dmesg when unmounting the filesystem, like the following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13240 at fs/btrfs/block-group.c:3186 btrfs_free_block_groups+0x314/0x470 [btrfs] (...) CPU: 0 PID: 13240 Comm: umount Tainted: G W L 5.3.0-rc8-btrfs-next-48+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_free_block_groups+0x314/0x470 [btrfs] (...) RSP: 0018:ffff9910c14cfdb8 EFLAGS: 00010286 RAX: 0000000000000024 RBX: ffff89cd8a4d55f0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff89cdf6a178a8 RDI: ffff89cdf6a178a8 RBP: ffff9910c14cfde8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff89cd4d618040 R11: 0000000000000000 R12: ffff89cd8a4d5508 R13: ffff89cde7c4a600 R14: dead000000000122 R15: dead000000000100 FS: 00007f42754432c0(0000) GS:ffff89cdf6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd25a47f730 CR3: 000000021f8d6006 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: close_ctree+0x1ad/0x390 [btrfs] generic_shutdown_super+0x6c/0x110 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0xa0 [btrfs] deactivate_locked_super+0x3a/0x70 cleanup_mnt+0xb4/0x160 task_work_run+0x7e/0xc0 exit_to_usermode_loop+0xfa/0x100 do_syscall_64+0x1cb/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f4274d2cb37 (...) RSP: 002b:00007ffcff701d38 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000557ebde2f060 RCX: 00007f4274d2cb37 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557ebde2f240 RBP: 0000557ebde2f240 R08: 0000557ebde2f270 R09: 0000000000000015 R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f427522ee64 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcff701fc0 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last enabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace bcf4b235461b26f6 ]--- BTRFS info (device sdb): space_info 4 has 19116032 free, is full BTRFS info (device sdb): space_info total=33554432, used=14176256, pinned=0, reserved=0, may_use=196608, readonly=65536 BTRFS info (device sdb): global_block_rsv: size 0 reserved 0 BTRFS info (device sdb): trans_block_rsv: size 0 reserved 0 BTRFS info (device sdb): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_refs_rsv: size 0 reserved 0 Fixes: 374bf9c5cd7d0b ("btrfs: unify error handling for ticket flushing") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-25 17:53:41 +08:00
/*
* Delete us from the list. After we unlock the space
* info, we don't want the async reclaim job to reserve
* space for this ticket. If that would happen, then the
* ticket's task would not known that space was reserved
* despite getting an error, resulting in a space leak
* (bytes_may_use counter of our space_info).
*/
remove_ticket(space_info, ticket);
ticket->error = -EINTR;
break;
}
spin_unlock(&space_info->lock);
schedule();
finish_wait(&ticket->wait, &wait);
spin_lock(&space_info->lock);
}
spin_unlock(&space_info->lock);
}
/**
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* Do the appropriate flushing and waiting for a ticket
*
* @fs_info: the filesystem
* @space_info: space info for the reservation
* @ticket: ticket for the reservation
* @start_ns: timestamp when the reservation started
* @orig_bytes: amount of bytes originally reserved
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* @flush: how much we can flush
*
* This does the work of figuring out how to flush for the ticket, waiting for
* the reservation, and returning the appropriate error if there is one.
*/
static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info,
struct reserve_ticket *ticket,
u64 start_ns, u64 orig_bytes,
enum btrfs_reserve_flush_enum flush)
{
int ret;
switch (flush) {
case BTRFS_RESERVE_FLUSH_DATA:
case BTRFS_RESERVE_FLUSH_ALL:
case BTRFS_RESERVE_FLUSH_ALL_STEAL:
wait_reserve_ticket(fs_info, space_info, ticket);
break;
case BTRFS_RESERVE_FLUSH_LIMIT:
priority_reclaim_metadata_space(fs_info, space_info, ticket,
priority_flush_states,
ARRAY_SIZE(priority_flush_states));
break;
case BTRFS_RESERVE_FLUSH_EVICT:
priority_reclaim_metadata_space(fs_info, space_info, ticket,
evict_flush_states,
ARRAY_SIZE(evict_flush_states));
break;
case BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE:
priority_reclaim_data_space(fs_info, space_info, ticket);
break;
default:
ASSERT(0);
break;
}
ret = ticket->error;
ASSERT(list_empty(&ticket->list));
Btrfs: fix race leading to metadata space leak after task received signal When a task that is allocating metadata needs to wait for the async reclaim job to process its ticket and gets a signal (because it was killed for example) before doing the wait, the task ends up erroring out but with space reserved for its ticket, which never gets released, resulting in a metadata space leak (more specifically a leak in the bytes_may_use counter of the metadata space_info object). Here's the sequence of steps leading to the space leak: 1) A task tries to create a file for example, so it ends up trying to start a transaction at btrfs_create(); 2) The filesystem is currently in a state where there is not enough metadata free space to satisfy the transaction's needs. So at space-info.c:__reserve_metadata_bytes() we create a ticket and add it to the list of tickets of the space info object. Also, because the metadata async reclaim job is not running, we queue a job ro run metadata reclaim; 3) In the meanwhile the task receives a signal (like SIGTERM from a kill command for example); 4) After queing the async reclaim job, at __reserve_metadata_bytes(), we unlock the metadata space info and call handle_reserve_ticket(); 5) That last function calls wait_reserve_ticket(), which acquires the lock from the metadata space info. Then in the first iteration of its while loop, it calls prepare_to_wait_event(), which returns -ERESTARTSYS because the task has a pending signal. As a result, we set the error field of the ticket to -EINTR and exit the while loop without deleting the ticket from the list of tickets (in the space info object). After exiting the loop we unlock the space info; 6) The async reclaim job is able to release enough metadata, acquires the metadata space info's lock and then reserves space for the ticket, since the ticket is still in the list of (non-priority) tickets. The space reservation happens at btrfs_try_granting_tickets(), called from maybe_fail_all_tickets(). This increments the bytes_may_use counter from the metadata space info object, sets the ticket's bytes field to zero (meaning success, that space was reserved) and removes it from the list of tickets; 7) wait_reserve_ticket() returns, with the error field of the ticket set to -EINTR. Then handle_reserve_ticket() just propagates that error to the caller. Because an error was returned, the caller does not release the reserved space, since the expectation is that any error means no space was reserved. Fix this by removing the ticket from the list, while holding the space info lock, at wait_reserve_ticket() when prepare_to_wait_event() returns an error. Also add some comments and an assertion to guarantee we never end up with a ticket that has an error set and a bytes counter field set to zero, to more easily detect regressions in the future. This issue could be triggered sporadically by some test cases from fstests such as generic/269 for example, which tries to fill a filesystem and then kills fsstress processes running in the background. When this issue happens, we get a warning in syslog/dmesg when unmounting the filesystem, like the following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13240 at fs/btrfs/block-group.c:3186 btrfs_free_block_groups+0x314/0x470 [btrfs] (...) CPU: 0 PID: 13240 Comm: umount Tainted: G W L 5.3.0-rc8-btrfs-next-48+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_free_block_groups+0x314/0x470 [btrfs] (...) RSP: 0018:ffff9910c14cfdb8 EFLAGS: 00010286 RAX: 0000000000000024 RBX: ffff89cd8a4d55f0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff89cdf6a178a8 RDI: ffff89cdf6a178a8 RBP: ffff9910c14cfde8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff89cd4d618040 R11: 0000000000000000 R12: ffff89cd8a4d5508 R13: ffff89cde7c4a600 R14: dead000000000122 R15: dead000000000100 FS: 00007f42754432c0(0000) GS:ffff89cdf6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd25a47f730 CR3: 000000021f8d6006 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: close_ctree+0x1ad/0x390 [btrfs] generic_shutdown_super+0x6c/0x110 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0xa0 [btrfs] deactivate_locked_super+0x3a/0x70 cleanup_mnt+0xb4/0x160 task_work_run+0x7e/0xc0 exit_to_usermode_loop+0xfa/0x100 do_syscall_64+0x1cb/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f4274d2cb37 (...) RSP: 002b:00007ffcff701d38 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000557ebde2f060 RCX: 00007f4274d2cb37 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557ebde2f240 RBP: 0000557ebde2f240 R08: 0000557ebde2f270 R09: 0000000000000015 R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f427522ee64 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcff701fc0 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last enabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace bcf4b235461b26f6 ]--- BTRFS info (device sdb): space_info 4 has 19116032 free, is full BTRFS info (device sdb): space_info total=33554432, used=14176256, pinned=0, reserved=0, may_use=196608, readonly=65536 BTRFS info (device sdb): global_block_rsv: size 0 reserved 0 BTRFS info (device sdb): trans_block_rsv: size 0 reserved 0 BTRFS info (device sdb): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sdb): delayed_refs_rsv: size 0 reserved 0 Fixes: 374bf9c5cd7d0b ("btrfs: unify error handling for ticket flushing") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-25 17:53:41 +08:00
/*
* Check that we can't have an error set if the reservation succeeded,
* as that would confuse tasks and lead them to error out without
* releasing reserved space (if an error happens the expectation is that
* space wasn't reserved at all).
*/
ASSERT(!(ticket->bytes == 0 && ticket->error));
trace_btrfs_reserve_ticket(fs_info, space_info->flags, orig_bytes,
start_ns, flush, ticket->error);
return ret;
}
btrfs: only check priority tickets for priority flushing In debugging a generic/320 failure on ppc64, Nikolay noticed that sometimes we'd ENOSPC out with plenty of space to reclaim if we had committed the transaction. He further discovered that this was because there was a priority ticket that was small enough to fit in the free space currently in the space_info. Consider the following scenario. There is no more space to reclaim in the fs without committing the transaction. Assume there's 1MiB of space free in the space info, but there are pending normal tickets with 2MiB reservations. Now a priority ticket comes in with a .5MiB reservation. Because we have normal tickets pending we add ourselves to the priority list, despite the fact that we could satisfy this reservation. The flushing machinery now gets to the point where it wants to commit the transaction, but because there's a .5MiB ticket on the priority list and we have 1MiB of free space we assume the ticket will be granted soon, so we bail without committing the transaction. Meanwhile the priority flushing does not commit the transaction, and eventually fails with an ENOSPC. Then all other tickets are failed with ENOSPC because we were never able to actually commit the transaction. The fix for this is we should have simply granted the priority flusher his reservation, because there was space to make the reservation. Priority flushers by definition take priority, so they are allowed to make their reservations before any previous normal tickets. By not adding this priority ticket to the list the normal flushing mechanisms will then commit the transaction and everything will continue normally. We still need to serialize ourselves with other priority tickets, so if there are any tickets on the priority list then we need to add ourselves to that list in order to maintain the serialization between priority tickets. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:58:08 +08:00
/*
* This returns true if this flush state will go through the ordinary flushing
* code.
*/
static inline bool is_normal_flushing(enum btrfs_reserve_flush_enum flush)
{
return (flush == BTRFS_RESERVE_FLUSH_ALL) ||
(flush == BTRFS_RESERVE_FLUSH_ALL_STEAL);
}
static inline void maybe_clamp_preempt(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info)
{
u64 ordered = percpu_counter_sum_positive(&fs_info->ordered_bytes);
u64 delalloc = percpu_counter_sum_positive(&fs_info->delalloc_bytes);
/*
* If we're heavy on ordered operations then clamping won't help us. We
* need to clamp specifically to keep up with dirty'ing buffered
* writers, because there's not a 1:1 correlation of writing delalloc
* and freeing space, like there is with flushing delayed refs or
* delayed nodes. If we're already more ordered than delalloc then
* we're keeping up, otherwise we aren't and should probably clamp.
*/
if (ordered < delalloc)
space_info->clamp = min(space_info->clamp + 1, 8);
}
static inline bool can_steal(enum btrfs_reserve_flush_enum flush)
{
return (flush == BTRFS_RESERVE_FLUSH_ALL_STEAL ||
flush == BTRFS_RESERVE_FLUSH_EVICT);
}
/**
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* Try to reserve bytes from the block_rsv's space
*
* @fs_info: the filesystem
* @space_info: space info we want to allocate from
* @orig_bytes: number of bytes we want
* @flush: whether or not we can flush to make our reservation
*
* This will reserve orig_bytes number of bytes from the space info associated
* with the block_rsv. If there is not enough space it will make an attempt to
* flush out space to make room. It will do this by flushing delalloc if
* possible or committing the transaction. If flush is 0 then no attempts to
* regain reservations will be made and this will fail if there is not enough
* space already.
*/
static int __reserve_bytes(struct btrfs_fs_info *fs_info,
struct btrfs_space_info *space_info, u64 orig_bytes,
enum btrfs_reserve_flush_enum flush)
{
struct work_struct *async_work;
struct reserve_ticket ticket;
u64 start_ns = 0;
u64 used;
int ret = 0;
bool pending_tickets;
ASSERT(orig_bytes);
ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_ALL);
if (flush == BTRFS_RESERVE_FLUSH_DATA)
async_work = &fs_info->async_data_reclaim_work;
else
async_work = &fs_info->async_reclaim_work;
spin_lock(&space_info->lock);
ret = -ENOSPC;
used = btrfs_space_info_used(space_info, true);
btrfs: only check priority tickets for priority flushing In debugging a generic/320 failure on ppc64, Nikolay noticed that sometimes we'd ENOSPC out with plenty of space to reclaim if we had committed the transaction. He further discovered that this was because there was a priority ticket that was small enough to fit in the free space currently in the space_info. Consider the following scenario. There is no more space to reclaim in the fs without committing the transaction. Assume there's 1MiB of space free in the space info, but there are pending normal tickets with 2MiB reservations. Now a priority ticket comes in with a .5MiB reservation. Because we have normal tickets pending we add ourselves to the priority list, despite the fact that we could satisfy this reservation. The flushing machinery now gets to the point where it wants to commit the transaction, but because there's a .5MiB ticket on the priority list and we have 1MiB of free space we assume the ticket will be granted soon, so we bail without committing the transaction. Meanwhile the priority flushing does not commit the transaction, and eventually fails with an ENOSPC. Then all other tickets are failed with ENOSPC because we were never able to actually commit the transaction. The fix for this is we should have simply granted the priority flusher his reservation, because there was space to make the reservation. Priority flushers by definition take priority, so they are allowed to make their reservations before any previous normal tickets. By not adding this priority ticket to the list the normal flushing mechanisms will then commit the transaction and everything will continue normally. We still need to serialize ourselves with other priority tickets, so if there are any tickets on the priority list then we need to add ourselves to that list in order to maintain the serialization between priority tickets. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-14 03:58:08 +08:00
/*
* We don't want NO_FLUSH allocations to jump everybody, they can
* generally handle ENOSPC in a different way, so treat them the same as
* normal flushers when it comes to skipping pending tickets.
*/
if (is_normal_flushing(flush) || (flush == BTRFS_RESERVE_NO_FLUSH))
pending_tickets = !list_empty(&space_info->tickets) ||
!list_empty(&space_info->priority_tickets);
else
pending_tickets = !list_empty(&space_info->priority_tickets);
/*
* Carry on if we have enough space (short-circuit) OR call
* can_overcommit() to ensure we can overcommit to continue.
*/
if (!pending_tickets &&
((used + orig_bytes <= writable_total_bytes(fs_info, space_info)) ||
btrfs_can_overcommit(fs_info, space_info, orig_bytes, flush))) {
btrfs_space_info_update_bytes_may_use(fs_info, space_info,
orig_bytes);
ret = 0;
}
/*
* If we couldn't make a reservation then setup our reservation ticket
* and kick the async worker if it's not already running.
*
* If we are a priority flusher then we just need to add our ticket to
* the list and we will do our own flushing further down.
*/
if (ret && flush != BTRFS_RESERVE_NO_FLUSH) {
ticket.bytes = orig_bytes;
ticket.error = 0;
space_info->reclaim_size += ticket.bytes;
init_waitqueue_head(&ticket.wait);
ticket.steal = can_steal(flush);
if (trace_btrfs_reserve_ticket_enabled())
start_ns = ktime_get_ns();
if (flush == BTRFS_RESERVE_FLUSH_ALL ||
flush == BTRFS_RESERVE_FLUSH_ALL_STEAL ||
flush == BTRFS_RESERVE_FLUSH_DATA) {
list_add_tail(&ticket.list, &space_info->tickets);
if (!space_info->flush) {
/*
* We were forced to add a reserve ticket, so
* our preemptive flushing is unable to keep
* up. Clamp down on the threshold for the
* preemptive flushing in order to keep up with
* the workload.
*/
maybe_clamp_preempt(fs_info, space_info);
space_info->flush = 1;
trace_btrfs_trigger_flush(fs_info,
space_info->flags,
orig_bytes, flush,
"enospc");
queue_work(system_unbound_wq, async_work);
}
} else {
list_add_tail(&ticket.list,
&space_info->priority_tickets);
}
} else if (!ret && space_info->flags & BTRFS_BLOCK_GROUP_METADATA) {
used += orig_bytes;
/*
* We will do the space reservation dance during log replay,
* which means we won't have fs_info->fs_root set, so don't do
* the async reclaim as we will panic.
*/
if (!test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags) &&
!work_busy(&fs_info->preempt_reclaim_work) &&
need_preemptive_reclaim(fs_info, space_info)) {
trace_btrfs_trigger_flush(fs_info, space_info->flags,
orig_bytes, flush, "preempt");
queue_work(system_unbound_wq,
btrfs: improve preemptive background space flushing Currently if we ever have to flush space because we do not have enough we allocate a ticket and attach it to the space_info, and then systematically flush things in the filesystem that hold space reservations until our space is reclaimed. However this has a latency cost, we must go to sleep and wait for the flushing to make progress before we are woken up and allowed to continue doing our work. In order to address that we used to kick off the async worker to flush space preemptively, so that we could be reclaiming space hopefully before any tasks needed to stop and wait for space to reclaim. When I introduced the ticketed ENOSPC stuff this broke slightly in the fact that we were using tickets to indicate if we were done flushing. No tickets, no more flushing. However this meant that we essentially never preemptively flushed. This caused a write performance regression that Nikolay noticed in an unrelated patch that removed the committing of the transaction during btrfs_end_transaction. The behavior that happened pre that patch was btrfs_end_transaction() would see that we were low on space, and it would commit the transaction. This was bad because in this particular case you could end up with thousands and thousands of transactions being committed during the 5 minute reproducer. With the patch to remove this behavior we got much more sane transaction commits, but we ended up slower because we would write for a while, flush, write for a while, flush again. To address this we need to reinstate a preemptive flushing mechanism. However it is distinctly different from our ticketing flushing in that it doesn't have tickets to base it's decisions on. Instead of bolting this logic into our existing flushing work, add another worker to handle this preemptive flushing. Here we will attempt to be slightly intelligent about the things that we flushing, attempting to balance between whichever pool is taking up the most space. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-09 21:28:22 +08:00
&fs_info->preempt_reclaim_work);
}
}
spin_unlock(&space_info->lock);
if (!ret || flush == BTRFS_RESERVE_NO_FLUSH)
return ret;
return handle_reserve_ticket(fs_info, space_info, &ticket, start_ns,
orig_bytes, flush);
}
/**
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* Trye to reserve metadata bytes from the block_rsv's space
*
* @fs_info: the filesystem
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* @block_rsv: block_rsv we're allocating for
* @orig_bytes: number of bytes we want
* @flush: whether or not we can flush to make our reservation
*
* This will reserve orig_bytes number of bytes from the space info associated
* with the block_rsv. If there is not enough space it will make an attempt to
* flush out space to make room. It will do this by flushing delalloc if
* possible or committing the transaction. If flush is 0 then no attempts to
* regain reservations will be made and this will fail if there is not enough
* space already.
*/
int btrfs_reserve_metadata_bytes(struct btrfs_fs_info *fs_info,
struct btrfs_block_rsv *block_rsv,
u64 orig_bytes,
enum btrfs_reserve_flush_enum flush)
{
int ret;
ret = __reserve_bytes(fs_info, block_rsv->space_info, orig_bytes, flush);
if (ret == -ENOSPC) {
trace_btrfs_space_reservation(fs_info, "space_info:enospc",
block_rsv->space_info->flags,
orig_bytes, 1);
if (btrfs_test_opt(fs_info, ENOSPC_DEBUG))
btrfs_dump_space_info(fs_info, block_rsv->space_info,
orig_bytes, 0);
}
return ret;
}
/**
btrfs: fix parameter description in space-info.c With these fixes space-info.c is clear for W=1 warnings, namely the following ones are fixed: fs/btrfs/space-info.c:575: warning: Function parameter or member 'fs_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:575: warning: Function parameter or member 'space_info' not described in 'may_commit_transaction' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'fs_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'space_info' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'ticket' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1231: warning: Function parameter or member 'flush' not described in 'handle_reserve_ticket' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'fs_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'space_info' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'orig_bytes' not described in '__reserve_bytes' fs/btrfs/space-info.c:1315: warning: Function parameter or member 'flush' not described in '__reserve_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'root' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'block_rsv' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'orig_bytes' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1427: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_metadata_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'fs_info' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'bytes' not described in 'btrfs_reserve_data_bytes' fs/btrfs/space-info.c:1462: warning: Function parameter or member 'flush' not described in 'btrfs_reserve_data_bytes' Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-22 17:58:02 +08:00
* Try to reserve data bytes for an allocation
*
* @fs_info: the filesystem
* @bytes: number of bytes we need
* @flush: how we are allowed to flush
*
* This will reserve bytes from the data space info. If there is not enough
* space then we will attempt to flush space as specified by flush.
*/
int btrfs_reserve_data_bytes(struct btrfs_fs_info *fs_info, u64 bytes,
enum btrfs_reserve_flush_enum flush)
{
struct btrfs_space_info *data_sinfo = fs_info->data_sinfo;
int ret;
ASSERT(flush == BTRFS_RESERVE_FLUSH_DATA ||
flush == BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE);
ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA);
ret = __reserve_bytes(fs_info, data_sinfo, bytes, flush);
if (ret == -ENOSPC) {
trace_btrfs_space_reservation(fs_info, "space_info:enospc",
data_sinfo->flags, bytes, 1);
if (btrfs_test_opt(fs_info, ENOSPC_DEBUG))
btrfs_dump_space_info(fs_info, data_sinfo, bytes, 0);
}
return ret;
}