UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/storage/Makefile

52 lines
1.6 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for the USB Mass Storage device drivers.
#
# 15 Aug 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
ccflags-y := -Idrivers/scsi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: Add UAS driver USB Attached SCSI is a new protocol specified jointly by the SCSI T10 committee and the USB Implementors Forum. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> [mina86@mina86.com: updated to use new USB_ prefix] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 19:05:23 +08:00
obj-$(CONFIG_USB_UAS) += uas.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
usb-storage-y := scsiglue.o protocol.o transport.o usb.o
usb-storage-y += initializers.o sierra_ms.o option_ms.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23 11:15:09 +08:00
usb-storage: prepare for subdriver separation This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:44 +08:00
ifeq ($(CONFIG_USB_LIBUSUAL),)
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
usb-storage-y += usual-tables.o
usb-storage: prepare for subdriver separation This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:44 +08:00
else
usb-storage: fix mistake in Makefile This patch (as1228) fixes a Makefile error introduced when the subdrivers in usb-storage were split out into separate modules. The intention is that when CONFIG_USB_LIBUSUAL is set, libusual.o and usual-tables.o should be combined into a single object file (called usb-libusual). The current Makefile will instead create two separate objects, and the result won't load properly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Alan Jenkins <sourcejedi.lkml@googlemail.com> Reported-and-tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-10 02:59:44 +08:00
obj-$(CONFIG_USB) += usb-libusual.o
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
usb-libusual-y := libusual.o usual-tables.o
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23 11:15:09 +08:00
endif
usb-storage: make sddr09 a separate module This patch (as1207) converts usb-storage's sddr09 subdriver into a separate module. An unexpected complication arises because of DPCM devices, in which one LUN uses the sddr09 transport and one uses the standard CB transport. Since these devices can be used even when USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h require special treatment. If SDDR09 isn't configured then the entries remain in unusual_devs.h; if it is then the entries are present in unusual_sddr09.h instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:49 +08:00
usb-storage: make alauda a separate module This patch (as1215) converts usb-storage's alauda subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:22 +08:00
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
usb-storage: make cypress_atacb a separate module This patch (as1210) converts usb-storage's cypress_atacb subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:04 +08:00
obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
usb-storage: make datafab a separate module This patch (as1213) converts usb-storage's datafab subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:15 +08:00
obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
Staging: Merge ENE UB6250 SD card codes from keucr to drivers/usb/storage The usb portion of this driver can now go into drivers/usb/storage. This leaves the non-usb portion of the code still in staging. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-04 10:56:18 +08:00
obj-$(CONFIG_USB_STORAGE_ENE_UB6250) += ums-eneub6250.o
usb-storage: make freecom a separate module This patch (as1212) converts usb-storage's freecom subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:11 +08:00
obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o
usb-storage: make isd200 a separate module This patch (as1208) converts usb-storage's isd200 subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:54 +08:00
obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o
usb-storage: make jumpshot a separate module This patch (as1214) converts usb-storage's jumpshot subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:19 +08:00
obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o
usb-storage: make karma a separate module This patch (as1216) converts usb-storage's karma subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:26 +08:00
obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o
usb-storage: make onetouch a separate module This patch (as1217) converts usb-storage's onetouch subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:33 +08:00
obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o
USB: usb_storage: add ums-realtek driver ums_realtek is used to support the power-saving function for Realtek RTS51xx USB card readers. Signed-off-by: wwang <wei_wang@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-14 16:53:34 +08:00
obj-$(CONFIG_USB_STORAGE_REALTEK) += ums-realtek.o
usb-storage: make sddr09 a separate module This patch (as1207) converts usb-storage's sddr09 subdriver into a separate module. An unexpected complication arises because of DPCM devices, in which one LUN uses the sddr09 transport and one uses the standard CB transport. Since these devices can be used even when USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h require special treatment. If SDDR09 isn't configured then the entries remain in unusual_devs.h; if it is then the entries are present in unusual_sddr09.h instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:49 +08:00
obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
usb-storage: make sddr55 a separate module This patch (as1209) converts usb-storage's sddr55 subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:59 +08:00
obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
usb-storage: make shuttle_usbat a separate module This patch (as1211) converts usb-storage's shuttle_usbat subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:48:08 +08:00
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
usb-storage: make sddr09 a separate module This patch (as1207) converts usb-storage's sddr09 subdriver into a separate module. An unexpected complication arises because of DPCM devices, in which one LUN uses the sddr09 transport and one uses the standard CB transport. Since these devices can be used even when USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h require special treatment. If SDDR09 isn't configured then the entries remain in unusual_devs.h; if it is then the entries are present in unusual_sddr09.h instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-13 03:47:49 +08:00
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
ums-alauda-y := alauda.o
ums-cypress-y := cypress_atacb.o
ums-datafab-y := datafab.o
Staging: Merge ENE UB6250 SD card codes from keucr to drivers/usb/storage The usb portion of this driver can now go into drivers/usb/storage. This leaves the non-usb portion of the code still in staging. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-04 10:56:18 +08:00
ums-eneub6250-y := ene_ub6250.o
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
ums-freecom-y := freecom.o
ums-isd200-y := isd200.o
ums-jumpshot-y := jumpshot.o
ums-karma-y := karma.o
ums-onetouch-y := onetouch.o
USB: usb_storage: add ums-realtek driver ums_realtek is used to support the power-saving function for Realtek RTS51xx USB card readers. Signed-off-by: wwang <wei_wang@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-14 16:53:34 +08:00
ums-realtek-y := realtek_cr.o
usb: makefile cleanup For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 10:03:26 +08:00
ums-sddr09-y := sddr09.o
ums-sddr55-y := sddr55.o
ums-usbat-y := shuttle_usbat.o