UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/leds/Makefile

63 lines
2.5 KiB
Makefile
Raw Normal View History

[PATCH] LED: add LED class Add the foundations of a new LEDs subsystem. This patch adds a class which presents LED devices within sysfs and allows their brightness to be controlled. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:04 +08:00
# LED Core
obj-$(CONFIG_NEW_LEDS) += led-core.o
obj-$(CONFIG_LEDS_CLASS) += led-class.o
[PATCH] LED: add LED trigger tupport Add support for LED triggers to the LED subsystem. "Triggers" are events which change the state of an LED. Two kinds of trigger are available, simple ones which can be added to exising code with minimum disruption and complex ones for implementing new or more complex functionality. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:05 +08:00
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
[PATCH] LED: add LED timer trigger Add an example of a complex LED trigger in the form of a generic timer which triggers the LED its attached to at a user specified frequency and duty cycle. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:07 +08:00
[PATCH] LED: add LED device support for the zaurus corgi and spitz models Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd, husky) and cxx00 (akita, spitz, borzoi) models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:09 +08:00
# LED Platform Drivers
led: Enable led in 88pm860x Enable led sub device in Marvell 88PM860x. Two LED arrays can be supported. Each LED array can be used for R,G,B leds. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-07 06:10:09 +08:00
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
leds: add BD2802GU LED driver ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-03-05 03:59:29 +08:00
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
[PATCH] LED: add LED device support for locomo devices Adds an LED driver for LEDs exported by the Sharp LOCOMO chip as found on some models of Sharp Zaurus. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:10 +08:00
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
leds: add driver for LM3530 ALS Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 07:30:16 +08:00
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
leds: add LM3533 LED driver Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 06:07:31 +08:00
obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
leds: Add new LED driver for lm3642 chips This driver is a general version for LM642 led chip of TI. LM3642 : The LM3642 is a 4MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. The LM3642 is controlled via an I2C-compatible interface. Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-12 20:05:50 +08:00
obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o
leds: Add rb532 LED driver for the User LED Mikrotik built six LEDs into the Routerboard 532, from which one is destined for custom use, the so called "User LED". This patch adds a driver for it, based on the LEDs class. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-23 02:35:48 +08:00
obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
[PATCH] S3C24XX GPIO LED support GPIO LED support for Samsung S3C24XX SoC series processors. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 13:54:00 +08:00
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
[PATCH] LED Class support for Soekris net48xx Add LED Class device support for the Soekris net48xx Error LED. Tested only on a net4801, but should work on a net4826 as well. I'd love to find a way of detecting a Soekris net48xx device but there is no DMI or any Soekris-specific PCI devices. [akpm@osdl.org: fixlets, cleanups] Signed-off-by: Chris Boot <bootc@bootc.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 19:45:34 +08:00
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
[PATCH] PCEngines WRAP LED Support A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are very similar to the Soekris net4801 (same NS SC1100 geode reference design). The LEDs on the WRAP are on different GPIO lines and I have modified and copied the net48xx error led support for this. It also includes support for an "extra" led (in addition to error). The three LEDs on the WRAP are at GPIO lines 2,3,18 (WRAP LEDs from left to right). This driver gives access to the second and third LEDs by twiddling GPIO lines 3 & 18. Because these boards are so similar to the net48xx, I basically sed-ed that driver to form the basis for leds-wrap.c. The only changes from leds-net48xx.c are: - #define WRAP_EXTRA_LED_GPIO - name changes - duplicate relevant sections to provide support for the "extra" led - reverse the various *_led_set values. The WRAP is "backwards" from the net48xx, and these needed to be updated for that. [akpm@osdl.org: build fix] Signed-off-by: Kristian Kielhofner <kris@krisk.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:37:28 +08:00
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
leds: Rename leds-cobalt driver The leds-cobalt driver only supports the Coable Qube series (not included in Cobalt Raq series). Rename the driver and update Kconfig/Makefile. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-21 07:02:47 +08:00
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
leds: Add Cobalt Raq series LEDs support Add Cobalt Raq series LEDs support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-27 16:51:05 +08:00
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
leds: Add driver for Sunfire UltraSPARC server LEDs. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-01 11:26:48 +08:00
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
leds: Add pca9532 led driver NXP pca9532 is a LED dimmer/controller attached to i2c bus. It allows attaching upto 16 leds which can either be on, off or dimmed and/or blinked with the two PWM modulators available. This driver is a "new-style" i2c driver that adheres to the driver model and implements the led framework api. Since the leds connected to the driver are platform specific, it is only useful when platform data is passed to the driver to define what leds are connected to which pins. Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-05-31 21:43:41 +08:00
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
leds: provide helper to register "leds-gpio" devices This function makes a deep copy of the platform data to allow it to live in init memory. For a kernel that supports several machines and so includes the definition for several leds-gpio devices this saves quite some memory because all but one definition can be free'd after boot. As the function is used by arch code it must be builtin and so cannot go into leds-gpio.c. [akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:13:29 +08:00
obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
leds: Add generic GPIO LED driver This patch adds support for GPIO connected leds via the new GPIO framework. Information about leds (gpio, polarity, name, default trigger) is passed to the driver via platform_data. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-28 03:49:53 +08:00
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
leds: LED driver for National Semiconductor LP3944 Funlight Chip LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-19 19:55:42 +08:00
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
leds-lp55xx: add new common driver for lp5521/5523 This patch supports basic common driver code for LP5521, LP5523/55231 devices. ( Driver Structure Data ) lp55xx_led and lp55xx_chip In lp55xx common driver, two different data structure is used. o lp55xx_led control multi output LED channels such as led current, channel index. o lp55xx_chip general chip control such like the I2C and platform data. For example, LP5521 has maximum 3 LED channels. LP5523/55231 has 9 output channels. lp55xx_chip for LP5521 ... lp55xx_led #1 lp55xx_led #2 lp55xx_led #3 lp55xx_chip for LP5523 ... lp55xx_led #1 lp55xx_led #2 . . lp55xx_led #9 ( Platform Data ) LP5521 and LP5523/55231 have own specific platform data. However, this data can be handled with just one platform data structure. The lp55xx platform data is declared in the header. This structure is derived from leds-lp5521.h and leds-lp5523.h Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-05 17:01:23 +08:00
obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
leds: update LP552x support Kconfig and Makefile Provide configuration and compilation support for LP5521 and LP5523 Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 06:05:23 +08:00
obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
leds: add new LP5562 LED driver LP5562 can drive up to 4 channels, RGB and White. LEDs can be controlled directly via the led class control interface. LP55xx common driver LP5562 is one of LP55xx family device, so LP55xx common code are used. On the other hand, chip specific configuration is defined in the structure 'lp55xx_device_config' LED pattern data LP5562 has also internal program memory which is used for running various LED patterns. LP5562 driver supports the firmware interface and the predefined pattern data as well. LP5562 device attributes: 'led_pattern' and 'engine_mux' A 'led_pattern' is an index code which runs the predefined pattern data. And 'engine_mux' is updated with the firmware interface is activated. Detailed description has been updated in the documentation files, 'leds-lp55xx.txt' and 'leds-lp5562.txt'. Changes on the header file LP5562 configurable definitions are added. Pattern RGB data is fixed as constant value. (No side effect on other devices, LP5521 or LP5523.) (cooloney@gmail.com: remove redundant mutex_unlock(). Reported by Dan Carpenter <dan.carpenter@oracle.com>) Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-19 13:10:14 +08:00
obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o
leds: support new LP8501 device - another LP55xx common LP8501 can drive up to 9 channels like LP5523. LEDs can be controlled directly via the I2C and programmable engines are supported. LP55xx common driver LP8501 is one of LP55xx family device, so LP55xx common code are used. Chip specific data is defined in the structure, 'lp55xx_device_config'. Differences between LP8501 and LP5523 Different register layout for LED output control and others. LP8501 specific feature for separate output power selection. LP8501 doesn't support external clock detection. Different programming engine data. LP8501 specific feature - output power selection Output channels are selected by power selection - Vout or Vdd. Separate power for VDD1-6 and VDD7-9 are available. It is configurable in the platform data. To support this feature, LP55xx DT structure and header are changed. Device tree binding is updated as well. LED pattern data Example pattern data is updated in the driver documentation. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-07-09 17:11:37 +08:00
obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
leds: add new lp8788 led driver TI LP8788 PMU has the current sink as the keyboard led driver. The brightness is controlled by the i2c commands. Configurable parameters can be defined in the platform side. Patch v2. (a) use workqueue on changing the brightness (b) use mutex_lock/unlock when the brightness is set and the led block of lp8788 device is enabled (c) remove err_dev on _probe() : just return as returned value if any errors (d) replace module_init/exit() with module_platform_driver() (e) add led configuration structure and loading them by default if platform data is null Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-20 16:43:59 +08:00
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
leds: add driver for TCA6507 LED controller TI's TCA6507 is the LED driver in the GTA04 Openmoko motherboard. The driver provides full support for brightness levels and hardware blinking. This driver can drive each of 7 outputs as an LED or a GPIO output, and provides hardware-assist blinking. [akpm@linux-foundation.org: fix __mod_i2c_device_table alias] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NeilBrown <neilb@suse.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:09:40 +08:00
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
leds: Add clevo notebook LED driver The driver supports the mail LED commonly found on different Clevo notebooks. The driver access the LED through the i8042 hardware which is handled by the input subsystem. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-31 18:46:41 +08:00
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
leds: add driver for the iPAQ micro This adds a driver for the iPAQ microcontroller LED. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-07-23 20:36:00 +08:00
obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
leds: Add HP Jornada 6xx driver Add support for the LEDs on the HP Jornada 620/660/680/690 devices. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 18:10:28 +08:00
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
leds: add led driver for Bachmann's ot200 Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 06:33:59 +08:00
obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
leds: Add new driver for the LEDs on the Freecom FSG-3 The LEDs on the Freecom FSG-3 are connected to an external memory-mapped latch on the ixp4xx expansion bus, and therefore cannot be supported by any of the existing LEDs drivers. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-25 06:43:09 +08:00
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
leds: Add support for Philips PCA955x I2C LED drivers This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553 LED driver chips. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-17 05:49:55 +08:00
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
leds-pca9633: Rename to leds-pca963x The driver now supports the chips pca9633 and pca9634, therefore we rename the files to more generic and meaningul names Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-15 05:23:50 +08:00
obj-$(CONFIG_LEDS_PCA963X) += leds-pca963x.o
leds: da903x: Add support for LEDs found on DA9030/DA9034 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-13 16:06:10 +08:00
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
leds: driver for DA9052/53 PMIC v2 LED Driver for Dialog Semiconductor DA9052/53 PMICs. [akpm@linux-foundation.org: make led_reg static] Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 06:07:26 +08:00
obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o
leds: Add WM831x status LED driver The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-05 21:09:21 +08:00
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
leds: Add WM8350 LED driver The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-12-05 00:52:33 +08:00
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
leds: simple driver for pwm driven LEDs Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-02-12 05:24:40 +08:00
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
leds: Add LED class driver for regulator driven LEDs. This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-07 22:08:13 +08:00
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
leds: LED driver for Intel NAS SS4200 series (v5) This code is based on a driver that came in the "Open-source and GPL components" download here: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent It was in a file called nasgpio.c inside of a second zip file called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this updated to use the LED subsystem with the ioctl and hardware monitor support removed. I don't have any need for brightness control, and its code is *completely* separate from the on/off controls implemented here. If anyone else wants it, I'd be happy to look into adding it, but I don't care enough for now. Except for the probe routines, I rewrote most of it. I also Note that I don't have any hardware documentation except for the original driver. Thanks go to Arjan for his help in getting the original source for this released and for chasing down some licensing issues. Signed-off-by: Dave Hansen <dave@sr71.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-02 06:43:32 +08:00
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
leds: Add driver for LT3593 controlled LEDs The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-15 08:59:35 +08:00
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
leds: Add driver for ADP5520/ADP5501 MFD PMICs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-10-08 16:00:19 +08:00
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
leds: Add Dell Business Class Netbook LED driver This patch adds an LED driver to support the Dell Activity LED on the Dell Latitude 2100 netbook and future products to come. The Activity LED is visible externally in the lid so classroom instructors can observe it from a distance. The driver uses the sysfs led_class and provides a standard LED interface. Signed-off by: Bob Rodgers <Robert_Rodgers@dell.com> Signed-off-by: Louis Davis <Louis_Davis@dell.com> Signed-off-by: Jim Dailey <Jim_Dailey@dell.com>, Developers Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-02-18 05:23:31 +08:00
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
leds: Add mc13783 LED support This add basic led support for Freescale MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-19 15:24:31 +08:00
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
leds: add LED driver for Network Space v2 LEDs This patch add a LED class driver for the dual-GPIO LEDs found on the Network Space v2 board (and parents). This include Internet Space v2, Network Space (Max) v2 and d2 Network v2 boards. This dual-GPIO LED is wired to a CPLD and can blink in relation with the SATA activity. The driver expose this capability through a "sata" sysfs attribute. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-06 22:08:46 +08:00
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
leds: add LED driver for Big Network series LEDs This patch add a LED class driver for LEDs found on the LaCie 2Big and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-10-07 22:38:49 +08:00
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
leds: Add ASIC3 LED support Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-14 02:52:56 +08:00
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
leds: Add suuport for MAX8997-LED driver This patch enables LED controller in MAX8997 PMIC. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-14 17:23:56 +08:00
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
leds: Add new LED driver for lm355x chips This driver is a general version for LM355x,lm3554 and lm3556,led chips of TI. LM3554 : The LM3554 is a 2 MHz fixed-frequency synchronous boost converter with 1.2A dual high side led drivers. Datasheet: www.ti.com/lit/ds/symlink/lm3554.pdf LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf (bryan.wu@canonical.com: use flush_work() to replace flush_work_sync() which is deprecated) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-05 15:05:58 +08:00
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS Add driver for BlinkM device to drivers/leds/. Add entry to MAINTAINERS file. Add documentation in Documentation/leds/. A BlinkM is a RGB LED controlled through I2C. This driver implements an interface to the LED framework and another sysfs group to access the internal options of the BlinkM. rev6: Use module_i2c_driver(). rev5: Removed own workqueue in favor of events wq. rev4: Fixed comments by Bryan Wu. rev3: Fixed issues found by Jonathan Neuschäfer. (bryan.wu@canonical.com: remove 2 trailing whitespace) Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-20 16:49:06 +08:00
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
ARM/leds: move ARM Versatile LED driver to leds subsystem Now that we have converted this driver to a real platform device module-based thing, we move the driver down into the LEDs subsystem and rename the config option to LEDS_VERSATILE. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-27 21:44:17 +08:00
obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
[PATCH] LED: add LED device support for the zaurus corgi and spitz models Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd, husky) and cxx00 (akita, spitz, borzoi) models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:09 +08:00
leds: Add dac124s085 driver Add an LED driver using the DAC124S085 DAC from NatSemi [randy.dunlap@oracle.com: use header files for interfaces] Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-11 02:58:28 +08:00
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
[PATCH] LED: add LED timer trigger Add an example of a complex LED trigger in the form of a generic timer which triggers the LED its attached to at a user specified frequency and duty cycle. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 18:31:07 +08:00
# LED Triggers
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 16:36:01 +08:00
obj-$(CONFIG_LEDS_TRIGGERS) += trigger/