OpenCloudOS-Kernel/crypto/async_tx/async_pq.c

406 lines
12 KiB
C
Raw Normal View History

async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
/*
* Copyright(c) 2007 Yuri Tikhonov <yur@emcraft.com>
* Copyright(c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution in the
* file called COPYING.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
/**
* scribble - space to hold throwaway P buffer for synchronous gen_syndrome
*/
static struct page *scribble;
/* the struct page *blocks[] parameter passed to async_gen_syndrome()
* and async_syndrome_val() contains the 'P' destination address at
* blocks[disks-2] and the 'Q' destination address at blocks[disks-1]
*
* note: these are macros as they are used as lvalues
*/
#define P(b, d) (b[d-2])
#define Q(b, d) (b[d-1])
/**
* do_async_gen_syndrome - asynchronously calculate P and/or Q
*/
static __async_inline struct dma_async_tx_descriptor *
do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks,
const unsigned char *scfs, unsigned int offset, int disks,
size_t len, dma_addr_t *dma_src,
struct async_submit_ctl *submit)
{
struct dma_async_tx_descriptor *tx = NULL;
struct dma_device *dma = chan->device;
enum dma_ctrl_flags dma_flags = 0;
enum async_tx_flags flags_orig = submit->flags;
dma_async_tx_callback cb_fn_orig = submit->cb_fn;
dma_async_tx_callback cb_param_orig = submit->cb_param;
int src_cnt = disks - 2;
unsigned char coefs[src_cnt];
unsigned short pq_src_cnt;
dma_addr_t dma_dest[2];
int src_off = 0;
int idx;
int i;
/* DMAs use destinations as sources, so use BIDIRECTIONAL mapping */
if (P(blocks, disks))
dma_dest[0] = dma_map_page(dma->dev, P(blocks, disks), offset,
len, DMA_BIDIRECTIONAL);
else
dma_flags |= DMA_PREP_PQ_DISABLE_P;
if (Q(blocks, disks))
dma_dest[1] = dma_map_page(dma->dev, Q(blocks, disks), offset,
len, DMA_BIDIRECTIONAL);
else
dma_flags |= DMA_PREP_PQ_DISABLE_Q;
/* convert source addresses being careful to collapse 'empty'
* sources and update the coefficients accordingly
*/
for (i = 0, idx = 0; i < src_cnt; i++) {
if (blocks[i] == NULL)
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
continue;
dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len,
DMA_TO_DEVICE);
coefs[idx] = scfs[i];
idx++;
}
src_cnt = idx;
while (src_cnt > 0) {
submit->flags = flags_orig;
pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
/* if we are submitting additional pqs, leave the chain open,
* clear the callback parameters, and leave the destination
* buffers mapped
*/
if (src_cnt > pq_src_cnt) {
submit->flags &= ~ASYNC_TX_ACK;
submit->flags |= ASYNC_TX_FENCE;
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
dma_flags |= DMA_COMPL_SKIP_DEST_UNMAP;
submit->cb_fn = NULL;
submit->cb_param = NULL;
} else {
dma_flags &= ~DMA_COMPL_SKIP_DEST_UNMAP;
submit->cb_fn = cb_fn_orig;
submit->cb_param = cb_param_orig;
if (cb_fn_orig)
dma_flags |= DMA_PREP_INTERRUPT;
}
if (submit->flags & ASYNC_TX_FENCE)
dma_flags |= DMA_PREP_FENCE;
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
/* Since we have clobbered the src_list we are committed
* to doing this asynchronously. Drivers force forward
* progress in case they can not provide a descriptor
*/
for (;;) {
tx = dma->device_prep_dma_pq(chan, dma_dest,
&dma_src[src_off],
pq_src_cnt,
&coefs[src_off], len,
dma_flags);
if (likely(tx))
break;
async_tx_quiesce(&submit->depend_tx);
dma_async_issue_pending(chan);
}
async_tx_submit(chan, tx, submit);
submit->depend_tx = tx;
/* drop completed sources */
src_cnt -= pq_src_cnt;
src_off += pq_src_cnt;
dma_flags |= DMA_PREP_CONTINUE;
}
return tx;
}
/**
* do_sync_gen_syndrome - synchronously calculate a raid6 syndrome
*/
static void
do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
size_t len, struct async_submit_ctl *submit)
{
void **srcs;
int i;
if (submit->scribble)
srcs = submit->scribble;
else
srcs = (void **) blocks;
for (i = 0; i < disks; i++) {
if (blocks[i] == NULL) {
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
BUG_ON(i > disks - 3); /* P or Q can't be zero */
srcs[i] = (void*)raid6_empty_zero_page;
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
} else
srcs[i] = page_address(blocks[i]) + offset;
}
raid6_call.gen_syndrome(disks, len, srcs);
async_tx_sync_epilog(submit);
}
/**
* async_gen_syndrome - asynchronously calculate a raid6 syndrome
* @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
* @offset: common offset into each block (src and dest) to start transaction
* @disks: number of blocks (including missing P or Q, see below)
* @len: length of operation in bytes
* @submit: submission/completion modifiers
*
* General note: This routine assumes a field of GF(2^8) with a
* primitive polynomial of 0x11d and a generator of {02}.
*
* 'disks' note: callers can optionally omit either P or Q (but not
* both) from the calculation by setting blocks[disks-2] or
* blocks[disks-1] to NULL. When P or Q is omitted 'len' must be <=
* PAGE_SIZE as a temporary buffer of this size is used in the
* synchronous path. 'disks' always accounts for both destination
* buffers.
*
* 'blocks' note: if submit->scribble is NULL then the contents of
* 'blocks' may be overridden
*/
struct dma_async_tx_descriptor *
async_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
size_t len, struct async_submit_ctl *submit)
{
int src_cnt = disks - 2;
struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
&P(blocks, disks), 2,
blocks, src_cnt, len);
struct dma_device *device = chan ? chan->device : NULL;
dma_addr_t *dma_src = NULL;
BUG_ON(disks > 255 || !(P(blocks, disks) || Q(blocks, disks)));
if (submit->scribble)
dma_src = submit->scribble;
else if (sizeof(dma_addr_t) <= sizeof(struct page *))
dma_src = (dma_addr_t *) blocks;
if (dma_src && device &&
(src_cnt <= dma_maxpq(device, 0) ||
dma_maxpq(device, DMA_PREP_CONTINUE) > 0) &&
is_dma_pq_aligned(device, offset, 0, len)) {
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
/* run the p+q asynchronously */
pr_debug("%s: (async) disks: %d len: %zu\n",
__func__, disks, len);
return do_async_gen_syndrome(chan, blocks, raid6_gfexp, offset,
disks, len, dma_src, submit);
}
/* run the pq synchronously */
pr_debug("%s: (sync) disks: %d len: %zu\n", __func__, disks, len);
/* wait for any prerequisite operations */
async_tx_quiesce(&submit->depend_tx);
if (!P(blocks, disks)) {
P(blocks, disks) = scribble;
BUG_ON(len + offset > PAGE_SIZE);
}
if (!Q(blocks, disks)) {
Q(blocks, disks) = scribble;
BUG_ON(len + offset > PAGE_SIZE);
}
do_sync_gen_syndrome(blocks, offset, disks, len, submit);
return NULL;
}
EXPORT_SYMBOL_GPL(async_gen_syndrome);
/**
* async_syndrome_val - asynchronously validate a raid6 syndrome
* @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
* @offset: common offset into each block (src and dest) to start transaction
* @disks: number of blocks (including missing P or Q, see below)
* @len: length of operation in bytes
* @pqres: on val failure SUM_CHECK_P_RESULT and/or SUM_CHECK_Q_RESULT are set
* @spare: temporary result buffer for the synchronous case
* @submit: submission / completion modifiers
*
* The same notes from async_gen_syndrome apply to the 'blocks',
* and 'disks' parameters of this routine. The synchronous path
* requires a temporary result buffer and submit->scribble to be
* specified.
*/
struct dma_async_tx_descriptor *
async_syndrome_val(struct page **blocks, unsigned int offset, int disks,
size_t len, enum sum_check_flags *pqres, struct page *spare,
struct async_submit_ctl *submit)
{
struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL,
NULL, 0, blocks, disks,
len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx;
unsigned char coefs[disks-2];
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0;
dma_addr_t *dma_src = NULL;
int src_cnt = 0;
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
BUG_ON(disks < 4);
if (submit->scribble)
dma_src = submit->scribble;
else if (sizeof(dma_addr_t) <= sizeof(struct page *))
dma_src = (dma_addr_t *) blocks;
if (dma_src && device && disks <= dma_maxpq(device, 0) &&
is_dma_pq_aligned(device, offset, 0, len)) {
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
struct device *dev = device->dev;
dma_addr_t *pq = &dma_src[disks-2];
int i;
pr_debug("%s: (async) disks: %d len: %zu\n",
__func__, disks, len);
if (!P(blocks, disks))
dma_flags |= DMA_PREP_PQ_DISABLE_P;
else
pq[0] = dma_map_page(dev, P(blocks,disks),
offset, len,
DMA_TO_DEVICE);
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
if (!Q(blocks, disks))
dma_flags |= DMA_PREP_PQ_DISABLE_Q;
else
pq[1] = dma_map_page(dev, Q(blocks,disks),
offset, len,
DMA_TO_DEVICE);
if (submit->flags & ASYNC_TX_FENCE)
dma_flags |= DMA_PREP_FENCE;
for (i = 0; i < disks-2; i++)
if (likely(blocks[i])) {
dma_src[src_cnt] = dma_map_page(dev, blocks[i],
offset, len,
DMA_TO_DEVICE);
coefs[src_cnt] = raid6_gfexp[i];
src_cnt++;
}
pq[1] = dma_map_page(dev, Q(blocks,disks),
offset, len,
DMA_TO_DEVICE);
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
for (;;) {
tx = device->device_prep_dma_pq_val(chan, pq, dma_src,
src_cnt,
coefs,
async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-15 03:20:36 +08:00
len, pqres,
dma_flags);
if (likely(tx))
break;
async_tx_quiesce(&submit->depend_tx);
dma_async_issue_pending(chan);
}
async_tx_submit(chan, tx, submit);
return tx;
} else {
struct page *p_src = P(blocks, disks);
struct page *q_src = Q(blocks, disks);
enum async_tx_flags flags_orig = submit->flags;
dma_async_tx_callback cb_fn_orig = submit->cb_fn;
void *scribble = submit->scribble;
void *cb_param_orig = submit->cb_param;
void *p, *q, *s;
pr_debug("%s: (sync) disks: %d len: %zu\n",
__func__, disks, len);
/* caller must provide a temporary result buffer and
* allow the input parameters to be preserved
*/
BUG_ON(!spare || !scribble);
/* wait for any prerequisite operations */
async_tx_quiesce(&submit->depend_tx);
/* recompute p and/or q into the temporary buffer and then
* check to see the result matches the current value
*/
tx = NULL;
*pqres = 0;
if (p_src) {
init_async_submit(submit, ASYNC_TX_XOR_ZERO_DST, NULL,
NULL, NULL, scribble);
tx = async_xor(spare, blocks, offset, disks-2, len, submit);
async_tx_quiesce(&tx);
p = page_address(p_src) + offset;
s = page_address(spare) + offset;
*pqres |= !!memcmp(p, s, len) << SUM_CHECK_P;
}
if (q_src) {
P(blocks, disks) = NULL;
Q(blocks, disks) = spare;
init_async_submit(submit, 0, NULL, NULL, NULL, scribble);
tx = async_gen_syndrome(blocks, offset, disks, len, submit);
async_tx_quiesce(&tx);
q = page_address(q_src) + offset;
s = page_address(spare) + offset;
*pqres |= !!memcmp(q, s, len) << SUM_CHECK_Q;
}
/* restore P, Q and submit */
P(blocks, disks) = p_src;
Q(blocks, disks) = q_src;
submit->cb_fn = cb_fn_orig;
submit->cb_param = cb_param_orig;
submit->flags = flags_orig;
async_tx_sync_epilog(submit);
return NULL;
}
}
EXPORT_SYMBOL_GPL(async_syndrome_val);
static int __init async_pq_init(void)
{
scribble = alloc_page(GFP_KERNEL);
if (scribble)
return 0;
pr_err("%s: failed to allocate required spare page\n", __func__);
return -ENOMEM;
}
static void __exit async_pq_exit(void)
{
put_page(scribble);
}
module_init(async_pq_init);
module_exit(async_pq_exit);
MODULE_DESCRIPTION("asynchronous raid6 syndrome generation/validation");
MODULE_LICENSE("GPL");