2021-04-15 06:33:21 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* This is a combined i2c adapter and algorithm driver for the
|
|
|
|
* MPC107/Tsi107 PowerPC northbridge and processors that include
|
|
|
|
* the same I2C unit (8240, 8245, 85xx).
|
|
|
|
*
|
2021-04-15 06:33:21 +08:00
|
|
|
* Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk
|
|
|
|
* Copyright (C) 2021 Allied Telesis Labs
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
2017-02-03 02:15:33 +08:00
|
|
|
#include <linux/sched/signal.h>
|
2013-09-18 03:28:33 +08:00
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_irq.h>
|
2008-07-01 07:01:26 +08:00
|
|
|
#include <linux/of_platform.h>
|
2021-04-15 06:33:24 +08:00
|
|
|
#include <linux/property.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
2005-10-30 02:07:23 +08:00
|
|
|
|
2013-08-24 00:01:44 +08:00
|
|
|
#include <linux/clk.h>
|
2009-04-07 16:20:53 +08:00
|
|
|
#include <linux/io.h>
|
2021-05-12 05:20:52 +08:00
|
|
|
#include <linux/iopoll.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/fsl_devices.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
#include <asm/mpc52xx.h>
|
2015-02-10 23:46:33 +08:00
|
|
|
#include <asm/mpc85xx.h>
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
|
2008-07-01 07:01:26 +08:00
|
|
|
#define DRV_NAME "mpc-i2c"
|
|
|
|
|
2010-02-17 18:19:19 +08:00
|
|
|
#define MPC_I2C_CLOCK_LEGACY 0
|
|
|
|
#define MPC_I2C_CLOCK_PRESERVE (~0U)
|
|
|
|
|
2009-04-07 16:20:53 +08:00
|
|
|
#define MPC_I2C_FDR 0x04
|
|
|
|
#define MPC_I2C_CR 0x08
|
|
|
|
#define MPC_I2C_SR 0x0c
|
|
|
|
#define MPC_I2C_DR 0x10
|
2005-04-17 06:20:36 +08:00
|
|
|
#define MPC_I2C_DFSRR 0x14
|
|
|
|
|
|
|
|
#define CCR_MEN 0x80
|
|
|
|
#define CCR_MIEN 0x40
|
|
|
|
#define CCR_MSTA 0x20
|
|
|
|
#define CCR_MTX 0x10
|
|
|
|
#define CCR_TXAK 0x08
|
|
|
|
#define CCR_RSTA 0x04
|
2021-05-12 05:20:52 +08:00
|
|
|
#define CCR_RSVD 0x02
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#define CSR_MCF 0x80
|
|
|
|
#define CSR_MAAS 0x40
|
|
|
|
#define CSR_MBB 0x20
|
|
|
|
#define CSR_MAL 0x10
|
|
|
|
#define CSR_SRW 0x04
|
|
|
|
#define CSR_MIF 0x02
|
|
|
|
#define CSR_RXAK 0x01
|
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
enum mpc_i2c_action {
|
|
|
|
MPC_I2C_ACTION_START = 1,
|
|
|
|
MPC_I2C_ACTION_RESTART,
|
|
|
|
MPC_I2C_ACTION_READ_BEGIN,
|
|
|
|
MPC_I2C_ACTION_READ_BYTE,
|
|
|
|
MPC_I2C_ACTION_WRITE,
|
|
|
|
MPC_I2C_ACTION_STOP,
|
|
|
|
|
|
|
|
__MPC_I2C_ACTION_CNT
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char * const action_str[] = {
|
|
|
|
"invalid",
|
|
|
|
"start",
|
|
|
|
"restart",
|
|
|
|
"read begin",
|
|
|
|
"read",
|
|
|
|
"write",
|
|
|
|
"stop",
|
|
|
|
};
|
|
|
|
|
|
|
|
static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT);
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
struct mpc_i2c {
|
2009-04-07 16:20:54 +08:00
|
|
|
struct device *dev;
|
2005-04-26 09:32:12 +08:00
|
|
|
void __iomem *base;
|
2005-04-17 06:20:36 +08:00
|
|
|
u32 interrupt;
|
2021-04-15 06:33:20 +08:00
|
|
|
wait_queue_head_t waitq;
|
|
|
|
spinlock_t lock;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct i2c_adapter adap;
|
|
|
|
int irq;
|
2010-02-17 16:59:14 +08:00
|
|
|
u32 real_clk;
|
2012-04-19 17:51:34 +08:00
|
|
|
u8 fdr, dfsrr;
|
2013-08-24 00:01:44 +08:00
|
|
|
struct clk *clk_per;
|
2021-04-15 06:33:20 +08:00
|
|
|
u32 cntl_bits;
|
|
|
|
enum mpc_i2c_action action;
|
|
|
|
struct i2c_msg *msgs;
|
|
|
|
int num_msgs;
|
|
|
|
int curr_msg;
|
|
|
|
u32 byte_posn;
|
|
|
|
u32 block;
|
|
|
|
int rc;
|
|
|
|
int expect_rxack;
|
2021-05-12 05:20:52 +08:00
|
|
|
bool has_errata_A004447;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct mpc_i2c_divider {
|
|
|
|
u16 divider;
|
|
|
|
u16 fdr; /* including dfsrr */
|
|
|
|
};
|
|
|
|
|
2010-02-17 18:19:17 +08:00
|
|
|
struct mpc_i2c_data {
|
2018-01-10 19:36:07 +08:00
|
|
|
void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock);
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
2009-04-07 16:20:53 +08:00
|
|
|
static inline void writeccr(struct mpc_i2c *i2c, u32 x)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
writeb(x, i2c->base + MPC_I2C_CR);
|
|
|
|
}
|
|
|
|
|
2007-07-12 20:12:31 +08:00
|
|
|
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
|
|
|
|
* the bus, because it wants to send ACK.
|
|
|
|
* Following sequence of enabling/disabling and sending start/stop generates
|
2017-05-11 20:20:33 +08:00
|
|
|
* the 9 pulses, each with a START then ending with STOP, so it's all OK.
|
2007-07-12 20:12:31 +08:00
|
|
|
*/
|
|
|
|
static void mpc_i2c_fixup(struct mpc_i2c *i2c)
|
|
|
|
{
|
2010-02-17 16:59:14 +08:00
|
|
|
int k;
|
2017-05-11 20:20:33 +08:00
|
|
|
unsigned long flags;
|
2010-02-17 16:59:14 +08:00
|
|
|
|
|
|
|
for (k = 9; k; k--) {
|
|
|
|
writeccr(i2c, 0);
|
2017-05-11 20:20:33 +08:00
|
|
|
writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
|
|
|
|
writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
|
|
|
|
readb(i2c->base + MPC_I2C_DR); /* init xfer */
|
|
|
|
udelay(15); /* let it hit the bus */
|
|
|
|
local_irq_save(flags); /* should not be delayed further */
|
|
|
|
writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
|
2014-06-03 17:00:32 +08:00
|
|
|
readb(i2c->base + MPC_I2C_DR);
|
2017-05-11 20:20:33 +08:00
|
|
|
if (k != 1)
|
|
|
|
udelay(5);
|
|
|
|
local_irq_restore(flags);
|
2010-02-17 16:59:14 +08:00
|
|
|
}
|
2017-05-11 20:20:33 +08:00
|
|
|
writeccr(i2c, CCR_MEN); /* Initiate STOP */
|
|
|
|
readb(i2c->base + MPC_I2C_DR);
|
|
|
|
udelay(15); /* Let STOP propagate */
|
|
|
|
writeccr(i2c, 0);
|
2007-07-12 20:12:31 +08:00
|
|
|
}
|
|
|
|
|
2021-05-12 05:20:52 +08:00
|
|
|
static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
|
|
|
|
{
|
|
|
|
void __iomem *addr = i2c->base + MPC_I2C_SR;
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
return readb_poll_timeout(addr, val, val & mask, 0, 100);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Workaround for Erratum A004447. From the P2040CE Rev Q
|
|
|
|
*
|
|
|
|
* 1. Set up the frequency divider and sampling rate.
|
|
|
|
* 2. I2CCR - a0h
|
|
|
|
* 3. Poll for I2CSR[MBB] to get set.
|
|
|
|
* 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
|
|
|
|
* step 5. If MAL is not set, then go to step 13.
|
|
|
|
* 5. I2CCR - 00h
|
|
|
|
* 6. I2CCR - 22h
|
|
|
|
* 7. I2CCR - a2h
|
|
|
|
* 8. Poll for I2CSR[MBB] to get set.
|
|
|
|
* 9. Issue read to I2CDR.
|
|
|
|
* 10. Poll for I2CSR[MIF] to be set.
|
|
|
|
* 11. I2CCR - 82h
|
|
|
|
* 12. Workaround complete. Skip the next steps.
|
|
|
|
* 13. Issue read to I2CDR.
|
|
|
|
* 14. Poll for I2CSR[MIF] to be set.
|
|
|
|
* 15. I2CCR - 80h
|
|
|
|
*/
|
|
|
|
static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
writeccr(i2c, CCR_MEN | CCR_MSTA);
|
|
|
|
ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = readb(i2c->base + MPC_I2C_SR);
|
|
|
|
|
|
|
|
if (val & CSR_MAL) {
|
|
|
|
writeccr(i2c, 0x00);
|
|
|
|
writeccr(i2c, CCR_MSTA | CCR_RSVD);
|
|
|
|
writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
|
|
|
|
ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
val = readb(i2c->base + MPC_I2C_DR);
|
|
|
|
ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
writeccr(i2c, CCR_MEN | CCR_RSVD);
|
|
|
|
} else {
|
|
|
|
val = readb(i2c->base + MPC_I2C_DR);
|
|
|
|
ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
writeccr(i2c, CCR_MEN);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-02-17 18:19:19 +08:00
|
|
|
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
|
|
|
|
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
|
|
|
|
{36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
|
|
|
|
{52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
|
|
|
|
{68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
|
|
|
|
{96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
|
|
|
|
{128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
|
|
|
|
{176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
|
|
|
|
{240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
|
|
|
|
{320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
|
|
|
|
{448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
|
|
|
|
{640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
|
|
|
|
{1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
|
|
|
|
{1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
|
|
|
|
{2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
|
|
|
|
{4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
|
|
|
|
{7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
|
|
|
|
{10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
|
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 *real_clk)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
2022-05-07 18:01:45 +08:00
|
|
|
struct fwnode_handle *fwnode = of_fwnode_handle(node);
|
2009-04-09 17:59:52 +08:00
|
|
|
const struct mpc_i2c_divider *div = NULL;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
unsigned int pvr = mfspr(SPRN_PVR);
|
|
|
|
u32 divider;
|
|
|
|
int i;
|
|
|
|
|
2010-02-17 16:59:14 +08:00
|
|
|
if (clock == MPC_I2C_CLOCK_LEGACY) {
|
|
|
|
/* see below - default fdr = 0x3f -> div = 2048 */
|
2022-05-07 18:01:45 +08:00
|
|
|
*real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
return -EINVAL;
|
2010-02-17 16:59:14 +08:00
|
|
|
}
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
/* Determine divider value */
|
2022-05-07 18:01:45 +08:00
|
|
|
divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We want to choose an FDR/DFSR that generates an I2C bus speed that
|
|
|
|
* is equal to or lower than the requested speed.
|
|
|
|
*/
|
2009-04-09 17:59:52 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
div = &mpc_i2c_dividers_52xx[i];
|
|
|
|
/* Old MPC5200 rev A CPUs do not support the high bits */
|
|
|
|
if (div->fdr & 0xc0 && pvr == 0x80822011)
|
|
|
|
continue;
|
|
|
|
if (div->divider >= divider)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2022-05-07 18:01:45 +08:00
|
|
|
*real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider;
|
2010-02-17 16:59:14 +08:00
|
|
|
return (int)div->fdr;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
}
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_52xx(struct device_node *node,
|
2010-02-17 18:19:18 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
2009-04-09 17:59:52 +08:00
|
|
|
int ret, fdr;
|
|
|
|
|
2010-02-17 18:19:19 +08:00
|
|
|
if (clock == MPC_I2C_CLOCK_PRESERVE) {
|
|
|
|
dev_dbg(i2c->dev, "using fdr %d\n",
|
|
|
|
readb(i2c->base + MPC_I2C_FDR));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2018-01-10 19:36:07 +08:00
|
|
|
ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk);
|
2009-04-09 17:59:52 +08:00
|
|
|
fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
|
2009-04-09 17:59:52 +08:00
|
|
|
|
|
|
|
if (ret >= 0)
|
2010-02-17 16:59:14 +08:00
|
|
|
dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
|
|
|
|
fdr);
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
}
|
2010-02-17 18:19:19 +08:00
|
|
|
#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_52xx(struct device_node *node,
|
2010-02-17 18:19:18 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
|
|
|
}
|
2010-02-17 18:19:19 +08:00
|
|
|
#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_MPC512x
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_512x(struct device_node *node,
|
2010-02-17 18:19:19 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
2010-02-17 18:19:19 +08:00
|
|
|
{
|
|
|
|
struct device_node *node_ctrl;
|
|
|
|
void __iomem *ctrl;
|
|
|
|
const u32 *pval;
|
|
|
|
u32 idx;
|
|
|
|
|
|
|
|
/* Enable I2C interrupts for mpc5121 */
|
|
|
|
node_ctrl = of_find_compatible_node(NULL, NULL,
|
|
|
|
"fsl,mpc5121-i2c-ctrl");
|
|
|
|
if (node_ctrl) {
|
|
|
|
ctrl = of_iomap(node_ctrl, 0);
|
|
|
|
if (ctrl) {
|
|
|
|
/* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
|
|
|
|
pval = of_get_property(node, "reg", NULL);
|
|
|
|
idx = (*pval & 0xff) / 0x20;
|
|
|
|
setbits32(ctrl, 1 << (24 + idx * 2));
|
|
|
|
iounmap(ctrl);
|
|
|
|
}
|
|
|
|
of_node_put(node_ctrl);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The clock setup for the 52xx works also fine for the 512x */
|
2018-01-10 19:36:07 +08:00
|
|
|
mpc_i2c_setup_52xx(node, i2c, clock);
|
2010-02-17 18:19:19 +08:00
|
|
|
}
|
|
|
|
#else /* CONFIG_PPC_MPC512x */
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_512x(struct device_node *node,
|
2010-02-17 18:19:19 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
2010-02-17 18:19:19 +08:00
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PPC_MPC512x */
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_FSL_SOC
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
|
|
|
|
{288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
|
|
|
|
{416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
|
|
|
|
{544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
|
|
|
|
{672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
|
|
|
|
{800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
|
|
|
|
{1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
|
|
|
|
{1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
|
|
|
|
{1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
|
|
|
|
{2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
|
|
|
|
{3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
|
|
|
|
{4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
|
|
|
|
{7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
|
|
|
|
{12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
|
|
|
|
{18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
|
|
|
|
{30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
|
|
|
|
{49152, 0x011e}, {61440, 0x011f}
|
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static u32 mpc_i2c_get_sec_cfg_8xxx(void)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
2017-10-28 04:24:44 +08:00
|
|
|
struct device_node *node;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
u32 __iomem *reg;
|
|
|
|
u32 val = 0;
|
|
|
|
|
|
|
|
node = of_find_node_by_name(NULL, "global-utilities");
|
|
|
|
if (node) {
|
|
|
|
const u32 *prop = of_get_property(node, "reg", NULL);
|
|
|
|
if (prop) {
|
|
|
|
/*
|
|
|
|
* Map and check POR Device Status Register 2
|
2017-12-07 18:20:02 +08:00
|
|
|
* (PORDEVSR2) at 0xE0014. Note than while MPC8533
|
|
|
|
* and MPC8544 indicate SEC frequency ratio
|
|
|
|
* configuration as bit 26 in PORDEVSR2, other MPC8xxx
|
|
|
|
* parts may store it differently or may not have it
|
|
|
|
* at all.
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
*/
|
|
|
|
reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
|
|
|
|
if (!reg)
|
|
|
|
printk(KERN_ERR
|
|
|
|
"Error: couldn't map PORDEVSR2\n");
|
|
|
|
else
|
2017-12-07 18:20:02 +08:00
|
|
|
val = in_be32(reg) & 0x00000020; /* sec-cfg */
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
iounmap(reg);
|
|
|
|
}
|
|
|
|
}
|
2014-08-08 18:07:42 +08:00
|
|
|
of_node_put(node);
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
2015-02-10 23:46:33 +08:00
|
|
|
static u32 mpc_i2c_get_prescaler_8xxx(void)
|
|
|
|
{
|
2017-12-07 18:20:01 +08:00
|
|
|
/*
|
|
|
|
* According to the AN2919 all MPC824x have prescaler 1, while MPC83xx
|
|
|
|
* may have prescaler 1, 2, or 3, depending on the power-on
|
|
|
|
* configuration.
|
|
|
|
*/
|
2015-02-10 23:46:33 +08:00
|
|
|
u32 prescaler = 1;
|
|
|
|
|
|
|
|
/* mpc85xx */
|
|
|
|
if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
|
|
|
|
|| pvr_version_is(PVR_VER_E500MC)
|
|
|
|
|| pvr_version_is(PVR_VER_E5500)
|
|
|
|
|| pvr_version_is(PVR_VER_E6500)) {
|
|
|
|
unsigned int svr = mfspr(SPRN_SVR);
|
|
|
|
|
|
|
|
if ((SVR_SOC_VER(svr) == SVR_8540)
|
|
|
|
|| (SVR_SOC_VER(svr) == SVR_8541)
|
|
|
|
|| (SVR_SOC_VER(svr) == SVR_8560)
|
|
|
|
|| (SVR_SOC_VER(svr) == SVR_8555)
|
|
|
|
|| (SVR_SOC_VER(svr) == SVR_8610))
|
|
|
|
/* the above 85xx SoCs have prescaler 1 */
|
|
|
|
prescaler = 1;
|
2017-12-07 18:20:01 +08:00
|
|
|
else if ((SVR_SOC_VER(svr) == SVR_8533)
|
|
|
|
|| (SVR_SOC_VER(svr) == SVR_8544))
|
|
|
|
/* the above 85xx SoCs have prescaler 3 or 2 */
|
|
|
|
prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
|
2015-02-10 23:46:33 +08:00
|
|
|
else
|
|
|
|
/* all the other 85xx have prescaler 2 */
|
|
|
|
prescaler = 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
return prescaler;
|
|
|
|
}
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 *real_clk)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
|
|
|
const struct mpc_i2c_divider *div = NULL;
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 prescaler = mpc_i2c_get_prescaler_8xxx();
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
u32 divider;
|
|
|
|
int i;
|
|
|
|
|
2017-12-07 18:20:00 +08:00
|
|
|
if (clock == MPC_I2C_CLOCK_LEGACY) {
|
|
|
|
/* see below - default fdr = 0x1031 -> div = 16 * 3072 */
|
|
|
|
*real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
divider = fsl_get_sys_freq() / clock / prescaler;
|
|
|
|
|
|
|
|
pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
|
|
|
|
fsl_get_sys_freq(), clock, divider);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We want to choose an FDR/DFSR that generates an I2C bus speed that
|
|
|
|
* is equal to or lower than the requested speed.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
|
|
|
|
div = &mpc_i2c_dividers_8xxx[i];
|
|
|
|
if (div->divider >= divider)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2010-02-17 16:59:14 +08:00
|
|
|
*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
|
2021-04-13 13:09:54 +08:00
|
|
|
return (int)div->fdr;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
}
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_8xxx(struct device_node *node,
|
2010-02-17 18:19:18 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
{
|
2009-04-09 17:59:52 +08:00
|
|
|
int ret, fdr;
|
|
|
|
|
2010-02-17 18:19:19 +08:00
|
|
|
if (clock == MPC_I2C_CLOCK_PRESERVE) {
|
|
|
|
dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
|
|
|
|
readb(i2c->base + MPC_I2C_DFSRR),
|
|
|
|
readb(i2c->base + MPC_I2C_FDR));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2018-01-10 19:36:07 +08:00
|
|
|
ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk);
|
2009-04-09 17:59:52 +08:00
|
|
|
fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
|
|
|
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
|
|
|
|
writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
|
2009-04-09 17:59:52 +08:00
|
|
|
|
|
|
|
if (ret >= 0)
|
|
|
|
dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
|
2010-02-17 16:59:14 +08:00
|
|
|
i2c->real_clk, fdr >> 8, fdr & 0xff);
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#else /* !CONFIG_FSL_SOC */
|
2012-11-28 04:59:38 +08:00
|
|
|
static void mpc_i2c_setup_8xxx(struct device_node *node,
|
2010-02-17 18:19:18 +08:00
|
|
|
struct mpc_i2c *i2c,
|
2018-01-10 19:36:07 +08:00
|
|
|
u32 clock)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
}
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
#endif /* CONFIG_FSL_SOC */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2021-04-15 06:33:20 +08:00
|
|
|
i2c->rc = rc;
|
|
|
|
i2c->block = 0;
|
|
|
|
i2c->cntl_bits = CCR_MEN;
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
|
|
|
wake_up(&i2c->waitq);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
static void mpc_i2c_do_action(struct mpc_i2c *i2c)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2022-01-05 09:53:04 +08:00
|
|
|
struct i2c_msg *msg = NULL;
|
2021-04-15 06:33:20 +08:00
|
|
|
int dir = 0;
|
|
|
|
int recv_len = 0;
|
|
|
|
u8 byte;
|
|
|
|
|
|
|
|
dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]);
|
|
|
|
|
|
|
|
i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK);
|
|
|
|
|
2022-01-05 09:53:04 +08:00
|
|
|
if (i2c->action != MPC_I2C_ACTION_STOP) {
|
|
|
|
msg = &i2c->msgs[i2c->curr_msg];
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
|
|
dir = 1;
|
|
|
|
if (msg->flags & I2C_M_RECV_LEN)
|
|
|
|
recv_len = 1;
|
|
|
|
}
|
2021-04-15 06:33:20 +08:00
|
|
|
|
|
|
|
switch (i2c->action) {
|
|
|
|
case MPC_I2C_ACTION_RESTART:
|
|
|
|
i2c->cntl_bits |= CCR_RSTA;
|
|
|
|
fallthrough;
|
|
|
|
|
|
|
|
case MPC_I2C_ACTION_START:
|
|
|
|
i2c->cntl_bits |= CCR_MSTA | CCR_MTX;
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
|
|
|
writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR);
|
|
|
|
i2c->expect_rxack = 1;
|
|
|
|
i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MPC_I2C_ACTION_READ_BEGIN:
|
|
|
|
if (msg->len) {
|
|
|
|
if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
|
|
|
|
i2c->cntl_bits |= CCR_TXAK;
|
|
|
|
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
|
|
|
/* Dummy read */
|
|
|
|
readb(i2c->base + MPC_I2C_DR);
|
|
|
|
}
|
|
|
|
i2c->action = MPC_I2C_ACTION_READ_BYTE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MPC_I2C_ACTION_READ_BYTE:
|
|
|
|
if (i2c->byte_posn || !recv_len) {
|
|
|
|
/* Generate Tx ACK on next to last byte */
|
|
|
|
if (i2c->byte_posn == msg->len - 2)
|
|
|
|
i2c->cntl_bits |= CCR_TXAK;
|
2012-02-23 17:42:45 +08:00
|
|
|
/* Do not generate stop on last byte */
|
2021-04-15 06:33:20 +08:00
|
|
|
if (i2c->byte_posn == msg->len - 1)
|
|
|
|
i2c->cntl_bits |= CCR_MTX;
|
|
|
|
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
2012-02-23 17:42:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
byte = readb(i2c->base + MPC_I2C_DR);
|
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
if (i2c->byte_posn == 0 && recv_len) {
|
|
|
|
if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) {
|
|
|
|
mpc_i2c_finish(i2c, -EPROTO);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
msg->len += byte;
|
2012-02-23 17:42:45 +08:00
|
|
|
/*
|
2021-04-15 06:33:20 +08:00
|
|
|
* For block reads, generate Tx ACK here if data length
|
2012-02-23 17:42:45 +08:00
|
|
|
* is 1 byte (total length is 2 bytes).
|
|
|
|
*/
|
2021-04-15 06:33:20 +08:00
|
|
|
if (msg->len == 2) {
|
|
|
|
i2c->cntl_bits |= CCR_TXAK;
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
|
|
|
}
|
2012-02-23 17:42:45 +08:00
|
|
|
}
|
2021-04-15 06:33:20 +08:00
|
|
|
|
|
|
|
dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte);
|
|
|
|
msg->buf[i2c->byte_posn++] = byte;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MPC_I2C_ACTION_WRITE:
|
|
|
|
dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action],
|
|
|
|
msg->buf[i2c->byte_posn]);
|
|
|
|
writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR);
|
|
|
|
i2c->expect_rxack = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MPC_I2C_ACTION_STOP:
|
|
|
|
mpc_i2c_finish(i2c, 0);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
WARN(1, "Unexpected action %d\n", i2c->action);
|
|
|
|
break;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2022-01-05 09:53:04 +08:00
|
|
|
if (msg && msg->len == i2c->byte_posn) {
|
2021-04-15 06:33:20 +08:00
|
|
|
i2c->curr_msg++;
|
|
|
|
i2c->byte_posn = 0;
|
|
|
|
|
|
|
|
if (i2c->curr_msg == i2c->num_msgs) {
|
|
|
|
i2c->action = MPC_I2C_ACTION_STOP;
|
|
|
|
/*
|
|
|
|
* We don't get another interrupt on read so
|
|
|
|
* finish the transfer now
|
|
|
|
*/
|
|
|
|
if (dir)
|
|
|
|
mpc_i2c_finish(i2c, 0);
|
|
|
|
} else {
|
|
|
|
i2c->action = MPC_I2C_ACTION_RESTART;
|
|
|
|
}
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2021-04-15 06:33:20 +08:00
|
|
|
spin_lock(&i2c->lock);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
if (!(status & CSR_MCF)) {
|
|
|
|
dev_dbg(i2c->dev, "unfinished\n");
|
|
|
|
mpc_i2c_finish(i2c, -EIO);
|
|
|
|
goto out;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
if (status & CSR_MAL) {
|
|
|
|
dev_dbg(i2c->dev, "arbitration lost\n");
|
|
|
|
mpc_i2c_finish(i2c, -EAGAIN);
|
|
|
|
goto out;
|
|
|
|
}
|
2010-02-17 16:59:14 +08:00
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
if (i2c->expect_rxack && (status & CSR_RXAK)) {
|
|
|
|
dev_dbg(i2c->dev, "no Rx ACK\n");
|
|
|
|
mpc_i2c_finish(i2c, -ENXIO);
|
|
|
|
goto out;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2021-04-15 06:33:20 +08:00
|
|
|
i2c->expect_rxack = 0;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
mpc_i2c_do_action(i2c);
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock(&i2c->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct mpc_i2c *i2c = dev_id;
|
|
|
|
u8 status;
|
|
|
|
|
|
|
|
status = readb(i2c->base + MPC_I2C_SR);
|
|
|
|
if (status & CSR_MIF) {
|
2021-07-16 04:58:32 +08:00
|
|
|
/* Wait up to 100us for transfer to properly complete */
|
2021-12-07 12:21:44 +08:00
|
|
|
readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
|
2021-04-15 06:33:20 +08:00
|
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
|
|
mpc_i2c_do_intr(i2c, status);
|
|
|
|
return IRQ_HANDLED;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2021-04-15 06:33:20 +08:00
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c)
|
|
|
|
{
|
|
|
|
long time_left;
|
|
|
|
|
|
|
|
time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout);
|
|
|
|
if (!time_left)
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
if (time_left < 0)
|
|
|
|
return time_left;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mpc_i2c_execute_msg(struct mpc_i2c *i2c)
|
|
|
|
{
|
|
|
|
unsigned long orig_jiffies;
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&i2c->lock, flags);
|
|
|
|
|
|
|
|
i2c->curr_msg = 0;
|
|
|
|
i2c->rc = 0;
|
|
|
|
i2c->byte_posn = 0;
|
|
|
|
i2c->block = 1;
|
|
|
|
i2c->action = MPC_I2C_ACTION_START;
|
|
|
|
|
|
|
|
i2c->cntl_bits = CCR_MEN | CCR_MIEN;
|
|
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
|
|
writeccr(i2c, i2c->cntl_bits);
|
|
|
|
|
|
|
|
mpc_i2c_do_action(i2c);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&i2c->lock, flags);
|
|
|
|
|
|
|
|
ret = mpc_i2c_wait_for_completion(i2c);
|
|
|
|
if (ret)
|
|
|
|
i2c->rc = ret;
|
|
|
|
|
|
|
|
if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT)
|
|
|
|
i2c_recover_bus(&i2c->adap);
|
|
|
|
|
2012-08-30 18:40:04 +08:00
|
|
|
orig_jiffies = jiffies;
|
|
|
|
/* Wait until STOP is seen, allow up to 1 s */
|
|
|
|
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
|
|
|
|
if (time_after(jiffies, orig_jiffies + HZ)) {
|
|
|
|
u8 status = readb(i2c->base + MPC_I2C_SR);
|
|
|
|
|
|
|
|
dev_dbg(i2c->dev, "timeout\n");
|
|
|
|
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
|
|
|
|
writeb(status & ~CSR_MAL,
|
|
|
|
i2c->base + MPC_I2C_SR);
|
2021-03-29 09:52:03 +08:00
|
|
|
i2c_recover_bus(&i2c->adap);
|
2012-08-30 18:40:04 +08:00
|
|
|
}
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
cond_resched();
|
|
|
|
}
|
2021-04-15 06:33:20 +08:00
|
|
|
|
|
|
|
return i2c->rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
|
|
|
{
|
|
|
|
int rc, ret = num;
|
|
|
|
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
dev_dbg(i2c->dev, "num = %d\n", num);
|
|
|
|
for (i = 0; i < num; i++)
|
|
|
|
dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n",
|
|
|
|
msgs[i].addr, msgs[i].flags, msgs[i].len,
|
|
|
|
msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len,
|
|
|
|
msgs[i].buf);
|
|
|
|
|
|
|
|
WARN_ON(i2c->msgs != NULL);
|
|
|
|
i2c->msgs = msgs;
|
|
|
|
i2c->num_msgs = num;
|
|
|
|
|
|
|
|
rc = mpc_i2c_execute_msg(i2c);
|
|
|
|
if (rc < 0)
|
|
|
|
ret = rc;
|
|
|
|
|
|
|
|
i2c->num_msgs = 0;
|
|
|
|
i2c->msgs = NULL;
|
|
|
|
|
|
|
|
return ret;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static u32 mpc_functionality(struct i2c_adapter *adap)
|
|
|
|
{
|
2012-02-23 17:42:45 +08:00
|
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
|
|
|
|
| I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2021-03-29 09:52:03 +08:00
|
|
|
static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
|
|
|
|
{
|
|
|
|
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
|
2021-05-12 05:20:52 +08:00
|
|
|
if (i2c->has_errata_A004447)
|
|
|
|
mpc_i2c_fixup_A004447(i2c);
|
|
|
|
else
|
|
|
|
mpc_i2c_fixup(i2c);
|
2021-03-29 09:52:03 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-09-04 04:39:46 +08:00
|
|
|
static const struct i2c_algorithm mpc_algo = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.master_xfer = mpc_xfer,
|
|
|
|
.functionality = mpc_functionality,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct i2c_adapter mpc_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.algo = &mpc_algo,
|
2009-03-29 04:34:43 +08:00
|
|
|
.timeout = HZ,
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
2021-03-29 09:52:03 +08:00
|
|
|
static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
|
|
|
|
.recover_bus = fsl_i2c_bus_recovery,
|
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static int fsl_i2c_probe(struct platform_device *op)
|
2005-07-28 02:43:26 +08:00
|
|
|
{
|
2021-04-15 06:33:24 +08:00
|
|
|
const struct mpc_i2c_data *data;
|
2005-07-28 02:43:26 +08:00
|
|
|
struct mpc_i2c *i2c;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
const u32 *prop;
|
2010-02-17 18:19:19 +08:00
|
|
|
u32 clock = MPC_I2C_CLOCK_LEGACY;
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
int result = 0;
|
|
|
|
int plen;
|
2013-08-24 00:01:44 +08:00
|
|
|
struct clk *clk;
|
|
|
|
int err;
|
2005-07-28 02:43:26 +08:00
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL);
|
2008-01-28 01:14:52 +08:00
|
|
|
if (!i2c)
|
2005-07-28 02:43:26 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2009-04-07 16:20:54 +08:00
|
|
|
i2c->dev = &op->dev; /* for debug and error output */
|
|
|
|
|
2021-04-15 06:33:20 +08:00
|
|
|
init_waitqueue_head(&i2c->waitq);
|
|
|
|
spin_lock_init(&i2c->lock);
|
2005-07-28 02:43:26 +08:00
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
i2c->base = devm_platform_ioremap_resource(op, 0);
|
2021-04-15 06:33:25 +08:00
|
|
|
if (IS_ERR(i2c->base))
|
2021-03-29 09:52:05 +08:00
|
|
|
return PTR_ERR(i2c->base);
|
2005-07-28 02:43:26 +08:00
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
i2c->irq = platform_get_irq(op, 0);
|
|
|
|
if (i2c->irq < 0)
|
|
|
|
return i2c->irq;
|
2021-03-29 09:52:04 +08:00
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr,
|
2021-03-29 09:52:04 +08:00
|
|
|
IRQF_SHARED, "i2c-mpc", i2c);
|
|
|
|
if (result < 0) {
|
|
|
|
dev_err(i2c->dev, "failed to attach interrupt\n");
|
2021-03-29 09:52:05 +08:00
|
|
|
return result;
|
2008-07-01 07:01:26 +08:00
|
|
|
}
|
2009-04-07 16:20:53 +08:00
|
|
|
|
2013-08-24 00:01:44 +08:00
|
|
|
/*
|
|
|
|
* enable clock for the I2C peripheral (non fatal),
|
|
|
|
* keep a reference upon successful allocation
|
|
|
|
*/
|
2021-04-15 06:33:22 +08:00
|
|
|
clk = devm_clk_get_optional(&op->dev, NULL);
|
|
|
|
if (IS_ERR(clk))
|
|
|
|
return PTR_ERR(clk);
|
|
|
|
|
|
|
|
err = clk_prepare_enable(clk);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&op->dev, "failed to enable clock\n");
|
|
|
|
return err;
|
2013-08-24 00:01:44 +08:00
|
|
|
}
|
|
|
|
|
2021-04-15 06:33:22 +08:00
|
|
|
i2c->clk_per = clk;
|
|
|
|
|
2016-08-05 16:56:44 +08:00
|
|
|
if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
|
2010-02-17 18:19:19 +08:00
|
|
|
clock = MPC_I2C_CLOCK_PRESERVE;
|
|
|
|
} else {
|
2010-04-14 07:12:29 +08:00
|
|
|
prop = of_get_property(op->dev.of_node, "clock-frequency",
|
|
|
|
&plen);
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
if (prop && plen == sizeof(u32))
|
|
|
|
clock = *prop;
|
2010-02-17 18:19:19 +08:00
|
|
|
}
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
|
2021-04-15 06:33:24 +08:00
|
|
|
data = device_get_match_data(&op->dev);
|
|
|
|
if (data) {
|
2018-01-10 19:36:07 +08:00
|
|
|
data->setup(op->dev.of_node, i2c, clock);
|
2010-02-17 18:19:19 +08:00
|
|
|
} else {
|
|
|
|
/* Backwards compatibility */
|
2010-04-14 07:12:29 +08:00
|
|
|
if (of_get_property(op->dev.of_node, "dfsrr", NULL))
|
2018-01-10 19:36:07 +08:00
|
|
|
mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
}
|
2008-07-01 07:01:26 +08:00
|
|
|
|
2010-02-17 16:59:14 +08:00
|
|
|
prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
|
|
|
|
if (prop && plen == sizeof(u32)) {
|
|
|
|
mpc_ops.timeout = *prop * HZ / 1000000;
|
|
|
|
if (mpc_ops.timeout < 5)
|
|
|
|
mpc_ops.timeout = 5;
|
|
|
|
}
|
|
|
|
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
|
|
|
|
|
2021-05-12 05:20:52 +08:00
|
|
|
if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
|
|
|
|
i2c->has_errata_A004447 = true;
|
|
|
|
|
2005-07-28 02:43:26 +08:00
|
|
|
i2c->adap = mpc_ops;
|
2013-07-11 03:03:21 +08:00
|
|
|
scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
|
2021-03-29 09:52:05 +08:00
|
|
|
"MPC adapter (%s)", of_node_full_name(op->dev.of_node));
|
2008-07-01 07:01:26 +08:00
|
|
|
i2c->adap.dev.parent = &op->dev;
|
2021-03-29 09:52:05 +08:00
|
|
|
i2c->adap.nr = op->id;
|
2010-06-08 21:48:18 +08:00
|
|
|
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
|
2021-03-29 09:52:03 +08:00
|
|
|
i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
|
2021-03-29 09:52:05 +08:00
|
|
|
platform_set_drvdata(op, i2c);
|
|
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
2008-07-01 07:01:26 +08:00
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
result = i2c_add_numbered_adapter(&i2c->adap);
|
|
|
|
if (result)
|
2005-07-28 02:43:26 +08:00
|
|
|
goto fail_add;
|
|
|
|
|
2021-03-29 09:52:05 +08:00
|
|
|
return 0;
|
2005-07-28 02:43:26 +08:00
|
|
|
|
2008-07-01 07:01:26 +08:00
|
|
|
fail_add:
|
2021-04-15 06:33:22 +08:00
|
|
|
clk_disable_unprepare(i2c->clk_per);
|
2021-03-29 09:52:05 +08:00
|
|
|
|
2005-07-28 02:43:26 +08:00
|
|
|
return result;
|
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static int fsl_i2c_remove(struct platform_device *op)
|
2005-07-28 02:43:26 +08:00
|
|
|
{
|
2013-05-23 18:22:40 +08:00
|
|
|
struct mpc_i2c *i2c = platform_get_drvdata(op);
|
2005-07-28 02:43:26 +08:00
|
|
|
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
|
2021-04-15 06:33:22 +08:00
|
|
|
clk_disable_unprepare(i2c->clk_per);
|
2013-08-24 00:01:44 +08:00
|
|
|
|
2005-07-28 02:43:26 +08:00
|
|
|
return 0;
|
|
|
|
};
|
|
|
|
|
2021-04-15 06:33:23 +08:00
|
|
|
static int __maybe_unused mpc_i2c_suspend(struct device *dev)
|
2012-04-19 17:51:34 +08:00
|
|
|
{
|
|
|
|
struct mpc_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
|
|
|
|
i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2021-04-15 06:33:23 +08:00
|
|
|
static int __maybe_unused mpc_i2c_resume(struct device *dev)
|
2012-04-19 17:51:34 +08:00
|
|
|
{
|
|
|
|
struct mpc_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
|
|
|
|
writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2013-07-15 10:28:23 +08:00
|
|
|
static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
|
2012-04-19 17:51:34 +08:00
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_data mpc_i2c_data_512x = {
|
2010-02-17 18:19:19 +08:00
|
|
|
.setup = mpc_i2c_setup_512x,
|
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_data mpc_i2c_data_52xx = {
|
2010-02-17 18:19:18 +08:00
|
|
|
.setup = mpc_i2c_setup_52xx,
|
2010-02-17 18:19:17 +08:00
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_data mpc_i2c_data_8313 = {
|
2010-02-17 18:19:18 +08:00
|
|
|
.setup = mpc_i2c_setup_8xxx,
|
2010-02-17 18:19:17 +08:00
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_data mpc_i2c_data_8543 = {
|
2010-02-17 18:19:18 +08:00
|
|
|
.setup = mpc_i2c_setup_8xxx,
|
2010-02-17 18:19:17 +08:00
|
|
|
};
|
|
|
|
|
2012-11-28 04:59:38 +08:00
|
|
|
static const struct mpc_i2c_data mpc_i2c_data_8544 = {
|
2010-02-17 18:19:18 +08:00
|
|
|
.setup = mpc_i2c_setup_8xxx,
|
2010-02-17 18:19:17 +08:00
|
|
|
};
|
|
|
|
|
2008-07-01 07:01:26 +08:00
|
|
|
static const struct of_device_id mpc_i2c_of_match[] = {
|
2010-02-17 18:19:17 +08:00
|
|
|
{.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
|
|
|
|
{.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
|
|
|
|
{.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
|
2010-02-17 18:19:19 +08:00
|
|
|
{.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
|
2010-02-17 18:19:17 +08:00
|
|
|
{.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
|
|
|
|
{.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
|
|
|
|
{.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
|
i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.
The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:
static const struct of_device_id mpc_i2c_of_match[] = {
...
{.compatible = "fsl,mpc8543-i2c",
.data = &(struct fsl_i2c_match_data) {
.setclock = mpc_i2c_setclock_8xxx,
.prescaler = 2,
},
},
The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.
It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.
The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 16:20:55 +08:00
|
|
|
/* Backward compatibility */
|
|
|
|
{.compatible = "fsl-i2c", },
|
2008-07-01 07:01:26 +08:00
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
|
|
|
|
|
2005-07-28 02:43:26 +08:00
|
|
|
/* Structure for a device driver */
|
2011-02-17 17:43:24 +08:00
|
|
|
static struct platform_driver mpc_i2c_driver = {
|
2008-07-01 07:01:26 +08:00
|
|
|
.probe = fsl_i2c_probe,
|
2012-11-28 04:59:38 +08:00
|
|
|
.remove = fsl_i2c_remove,
|
2010-04-14 07:13:02 +08:00
|
|
|
.driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.of_match_table = mpc_i2c_of_match,
|
2021-04-15 06:33:23 +08:00
|
|
|
.pm = &mpc_i2c_pm_ops,
|
2005-11-10 06:32:44 +08:00
|
|
|
},
|
2005-07-28 02:43:26 +08:00
|
|
|
};
|
|
|
|
|
2012-01-13 03:32:04 +08:00
|
|
|
module_platform_driver(mpc_i2c_driver);
|
2005-07-28 02:43:26 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
|
2009-04-07 16:20:53 +08:00
|
|
|
MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
|
2010-02-17 18:19:19 +08:00
|
|
|
"MPC824x/83xx/85xx/86xx/512x/52xx processors");
|
2005-04-17 06:20:36 +08:00
|
|
|
MODULE_LICENSE("GPL");
|