UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm64/kvm/sys_regs.c

2552 lines
69 KiB
C
Raw Normal View History

arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/*
* Copyright (C) 2012,2013 - ARM Ltd
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* Derived from arch/arm/kvm/coproc.c:
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Authors: Rusty Russell <rusty@rustcorp.com.au>
* Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
arm64: KVM: Switch the sys_reg search to be a binary search Our 64bit sys_reg table is about 90 entries long (so far, and the PMU support is likely to increase this). This means that on average, it takes 45 comparaisons to find the right entry (and actually the full 90 if we have to search the invariant table). Not the most efficient thing. Specially when you think that this table is already sorted. Switching to a binary search effectively reduces the search to about 7 comparaisons. Slightly better! As an added bonus, the comparison is done by comparing all the fields at once, instead of one at a time. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-22 02:27:04 +08:00
#include <linux/bsearch.h>
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
#include <linux/kvm_host.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
#include <linux/mm.h>
arm64/sve: KVM: Hide SVE from CPU features exposed to guests KVM guests cannot currently use SVE, because SVE is always configured to trap to EL2. However, a guest that sees SVE reported as present in ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to use it. Instead of working, the guest will receive an injected undef exception, which may cause the guest to oops or go into a spin. To avoid misleading the guest into believing that SVE will work, this patch masks out the SVE field from ID_AA64PFR0_EL1 when a guest attempts to read this register. No support is explicitly added for ID_AA64ZFR0_EL1 either, so that is still emulated as reading as zero, which is consistent with SVE not being implemented. This is a temporary measure, and will be removed in a later series when full KVM support for SVE is implemented. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:51:18 +08:00
#include <linux/printk.h>
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
#include <linux/uaccess.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
#include <asm/cacheflush.h>
#include <asm/cputype.h>
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
#include <asm/debug-monitors.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
#include <asm/esr.h>
#include <asm/kvm_arm.h>
arm64: KVM: Turn system register numbers to an enum Having the system register numbers as #defines has been a pain since day one, as the ordering is pretty fragile, and moving things around leads to renumbering and epic conflict resolutions. Now that we're mostly acessing the sysreg file in C, an enum is a much better type to use, and we can clean things up a bit. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-10-26 03:57:11 +08:00
#include <asm/kvm_asm.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
#include <asm/kvm_coproc.h>
#include <asm/kvm_emulate.h>
#include <asm/kvm_host.h>
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
#include <asm/kvm_hyp.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
#include <asm/kvm_mmu.h>
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
#include <asm/perf_event.h>
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
#include <asm/sysreg.h>
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
#include <trace/events/kvm.h>
#include "sys_regs.h"
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
#include "trace.h"
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/*
* All of this file is extremly similar to the ARM coproc.c, but the
* types are different. My gut feeling is that it should be pretty
* easy to merge, but that would be an ABI breakage -- again. VFP
* would also need to be abstracted.
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
*
* For AArch32, we only take care of what is being trapped. Anything
* that has to do with init and userspace access has to go via the
* 64bit interface.
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
*/
arm64: KVM: Make unexpected reads from WO registers inject an undef Reads from write-only system registers are generally confined to EL1 and not propagated to EL2 (that's what the architecture mantates). In order to be sure that we have a sane behaviour even in the unlikely event that we have a broken system, we still handle it in KVM. In that case, let's inject an undef into the guest. Let's also remove write_to_read_only which isn't used anywhere. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:40 +08:00
static bool read_from_write_only(struct kvm_vcpu *vcpu,
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
struct sys_reg_params *params,
const struct sys_reg_desc *r)
arm64: KVM: Make unexpected reads from WO registers inject an undef Reads from write-only system registers are generally confined to EL1 and not propagated to EL2 (that's what the architecture mantates). In order to be sure that we have a sane behaviour even in the unlikely event that we have a broken system, we still handle it in KVM. In that case, let's inject an undef into the guest. Let's also remove write_to_read_only which isn't used anywhere. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:40 +08:00
{
WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n");
print_sys_reg_instr(params);
kvm_inject_undefined(vcpu);
return false;
}
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
static bool write_to_read_only(struct kvm_vcpu *vcpu,
struct sys_reg_params *params,
const struct sys_reg_desc *r)
{
WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n");
print_sys_reg_instr(params);
kvm_inject_undefined(vcpu);
return false;
}
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
u64 vcpu_read_sys_reg(struct kvm_vcpu *vcpu, int reg)
{
if (!vcpu->arch.sysregs_loaded_on_cpu)
goto immediate_read;
/*
* System registers listed in the switch are not saved on every
* exit from the guest but are only saved on vcpu_put.
KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Some system registers do not affect the host kernel's execution and can therefore be loaded when we are about to run a VCPU and we don't have to restore the host state to the hardware before the time when we are actually about to return to userspace or schedule out the VCPU thread. The EL1 system registers and the userspace state registers only affecting EL0 execution do not need to be saved and restored on every switch between the VM and the host, because they don't affect the host kernel's execution. We mark all registers which are now deffered as such in the vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most up-to-date copy is always accessed. Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu threads, for example via the GIC emulation, and therefore must be declared as immediate, which is fine as the guest cannot modify this value. The 32-bit sysregs can also be deferred but we do this in a separate patch as it requires a bit more infrastructure. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 02:43:45 +08:00
*
* Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
* should never be listed below, because the guest cannot modify its
* own MPIDR_EL1 and MPIDR_EL1 is accessed for VCPU A from VCPU B's
* thread when emulating cross-VCPU communication.
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
*/
switch (reg) {
KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Some system registers do not affect the host kernel's execution and can therefore be loaded when we are about to run a VCPU and we don't have to restore the host state to the hardware before the time when we are actually about to return to userspace or schedule out the VCPU thread. The EL1 system registers and the userspace state registers only affecting EL0 execution do not need to be saved and restored on every switch between the VM and the host, because they don't affect the host kernel's execution. We mark all registers which are now deffered as such in the vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most up-to-date copy is always accessed. Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu threads, for example via the GIC emulation, and therefore must be declared as immediate, which is fine as the guest cannot modify this value. The 32-bit sysregs can also be deferred but we do this in a separate patch as it requires a bit more infrastructure. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 02:43:45 +08:00
case CSSELR_EL1: return read_sysreg_s(SYS_CSSELR_EL1);
case SCTLR_EL1: return read_sysreg_s(sctlr_EL12);
case ACTLR_EL1: return read_sysreg_s(SYS_ACTLR_EL1);
case CPACR_EL1: return read_sysreg_s(cpacr_EL12);
case TTBR0_EL1: return read_sysreg_s(ttbr0_EL12);
case TTBR1_EL1: return read_sysreg_s(ttbr1_EL12);
case TCR_EL1: return read_sysreg_s(tcr_EL12);
case ESR_EL1: return read_sysreg_s(esr_EL12);
case AFSR0_EL1: return read_sysreg_s(afsr0_EL12);
case AFSR1_EL1: return read_sysreg_s(afsr1_EL12);
case FAR_EL1: return read_sysreg_s(far_EL12);
case MAIR_EL1: return read_sysreg_s(mair_EL12);
case VBAR_EL1: return read_sysreg_s(vbar_EL12);
case CONTEXTIDR_EL1: return read_sysreg_s(contextidr_EL12);
case TPIDR_EL0: return read_sysreg_s(SYS_TPIDR_EL0);
case TPIDRRO_EL0: return read_sysreg_s(SYS_TPIDRRO_EL0);
case TPIDR_EL1: return read_sysreg_s(SYS_TPIDR_EL1);
case AMAIR_EL1: return read_sysreg_s(amair_EL12);
case CNTKCTL_EL1: return read_sysreg_s(cntkctl_EL12);
case PAR_EL1: return read_sysreg_s(SYS_PAR_EL1);
KVM: arm64: Defer saving/restoring 32-bit sysregs to vcpu load/put When running a 32-bit VM (EL1 in AArch32), the AArch32 system registers can be deferred to vcpu load/put on VHE systems because neither the host kernel nor host userspace uses these registers. Note that we can't save DBGVCR32_EL2 conditionally based on the state of the debug dirty flag on VHE after this change, because during vcpu_load() we haven't calculated a valid debug flag yet, and when we've restored the register during vcpu_load() we also have to save it during vcpu_put(). This means that we'll always restore/save the register for VHE on load/put, but luckily vcpu load/put are called rarely, so saving an extra register unconditionally shouldn't significantly hurt performance. We can also not defer saving FPEXC32_32 because this register only holds a guest-valid value for 32-bit guests during the exit path when the guest has used FPSIMD registers and restored the register in the early assembly handler from taking the EL2 fault, and therefore we have to check if fpsimd is enabled for the guest in the exit path and save the register then, for both VHE and non-VHE guests. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-28 05:12:12 +08:00
case DACR32_EL2: return read_sysreg_s(SYS_DACR32_EL2);
case IFSR32_EL2: return read_sysreg_s(SYS_IFSR32_EL2);
case DBGVCR32_EL2: return read_sysreg_s(SYS_DBGVCR32_EL2);
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
}
immediate_read:
return __vcpu_sys_reg(vcpu, reg);
}
void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
{
if (!vcpu->arch.sysregs_loaded_on_cpu)
goto immediate_write;
/*
* System registers listed in the switch are not restored on every
* entry to the guest but are only restored on vcpu_load.
KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Some system registers do not affect the host kernel's execution and can therefore be loaded when we are about to run a VCPU and we don't have to restore the host state to the hardware before the time when we are actually about to return to userspace or schedule out the VCPU thread. The EL1 system registers and the userspace state registers only affecting EL0 execution do not need to be saved and restored on every switch between the VM and the host, because they don't affect the host kernel's execution. We mark all registers which are now deffered as such in the vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most up-to-date copy is always accessed. Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu threads, for example via the GIC emulation, and therefore must be declared as immediate, which is fine as the guest cannot modify this value. The 32-bit sysregs can also be deferred but we do this in a separate patch as it requires a bit more infrastructure. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 02:43:45 +08:00
*
* Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
* should never be listed below, because the the MPIDR should only be
* set once, before running the VCPU, and never changed later.
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
*/
switch (reg) {
KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Some system registers do not affect the host kernel's execution and can therefore be loaded when we are about to run a VCPU and we don't have to restore the host state to the hardware before the time when we are actually about to return to userspace or schedule out the VCPU thread. The EL1 system registers and the userspace state registers only affecting EL0 execution do not need to be saved and restored on every switch between the VM and the host, because they don't affect the host kernel's execution. We mark all registers which are now deffered as such in the vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most up-to-date copy is always accessed. Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu threads, for example via the GIC emulation, and therefore must be declared as immediate, which is fine as the guest cannot modify this value. The 32-bit sysregs can also be deferred but we do this in a separate patch as it requires a bit more infrastructure. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 02:43:45 +08:00
case CSSELR_EL1: write_sysreg_s(val, SYS_CSSELR_EL1); return;
case SCTLR_EL1: write_sysreg_s(val, sctlr_EL12); return;
case ACTLR_EL1: write_sysreg_s(val, SYS_ACTLR_EL1); return;
case CPACR_EL1: write_sysreg_s(val, cpacr_EL12); return;
case TTBR0_EL1: write_sysreg_s(val, ttbr0_EL12); return;
case TTBR1_EL1: write_sysreg_s(val, ttbr1_EL12); return;
case TCR_EL1: write_sysreg_s(val, tcr_EL12); return;
case ESR_EL1: write_sysreg_s(val, esr_EL12); return;
case AFSR0_EL1: write_sysreg_s(val, afsr0_EL12); return;
case AFSR1_EL1: write_sysreg_s(val, afsr1_EL12); return;
case FAR_EL1: write_sysreg_s(val, far_EL12); return;
case MAIR_EL1: write_sysreg_s(val, mair_EL12); return;
case VBAR_EL1: write_sysreg_s(val, vbar_EL12); return;
case CONTEXTIDR_EL1: write_sysreg_s(val, contextidr_EL12); return;
case TPIDR_EL0: write_sysreg_s(val, SYS_TPIDR_EL0); return;
case TPIDRRO_EL0: write_sysreg_s(val, SYS_TPIDRRO_EL0); return;
case TPIDR_EL1: write_sysreg_s(val, SYS_TPIDR_EL1); return;
case AMAIR_EL1: write_sysreg_s(val, amair_EL12); return;
case CNTKCTL_EL1: write_sysreg_s(val, cntkctl_EL12); return;
case PAR_EL1: write_sysreg_s(val, SYS_PAR_EL1); return;
KVM: arm64: Defer saving/restoring 32-bit sysregs to vcpu load/put When running a 32-bit VM (EL1 in AArch32), the AArch32 system registers can be deferred to vcpu load/put on VHE systems because neither the host kernel nor host userspace uses these registers. Note that we can't save DBGVCR32_EL2 conditionally based on the state of the debug dirty flag on VHE after this change, because during vcpu_load() we haven't calculated a valid debug flag yet, and when we've restored the register during vcpu_load() we also have to save it during vcpu_put(). This means that we'll always restore/save the register for VHE on load/put, but luckily vcpu load/put are called rarely, so saving an extra register unconditionally shouldn't significantly hurt performance. We can also not defer saving FPEXC32_32 because this register only holds a guest-valid value for 32-bit guests during the exit path when the guest has used FPSIMD registers and restored the register in the early assembly handler from taking the EL2 fault, and therefore we have to check if fpsimd is enabled for the guest in the exit path and save the register then, for both VHE and non-VHE guests. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-28 05:12:12 +08:00
case DACR32_EL2: write_sysreg_s(val, SYS_DACR32_EL2); return;
case IFSR32_EL2: write_sysreg_s(val, SYS_IFSR32_EL2); return;
case DBGVCR32_EL2: write_sysreg_s(val, SYS_DBGVCR32_EL2); return;
KVM: arm64: Introduce framework for accessing deferred sysregs We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-24 04:53:48 +08:00
}
immediate_write:
__vcpu_sys_reg(vcpu, reg) = val;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */
static u32 cache_levels;
/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
#define CSSELR_MAX 12
/* Which cache CCSIDR represents depends on CSSELR value. */
static u32 get_ccsidr(u32 csselr)
{
u32 ccsidr;
/* Make sure noone else changes CSSELR during this! */
local_irq_disable();
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
write_sysreg(csselr, csselr_el1);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
isb();
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
ccsidr = read_sysreg(ccsidr_el1);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
local_irq_enable();
return ccsidr;
}
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
/*
* See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
*/
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
static bool access_dcsw(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
const struct sys_reg_desc *r)
{
if (!p->is_write)
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
return read_from_write_only(vcpu, p, r);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
kvm_set_way_flush(vcpu);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
return true;
}
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
/*
* Generic accessor for VM registers. Only called as long as HCR_TVM
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
* is set. If the guest enables the MMU, we stop trapping the VM
* sys_regs and leave it in complete control of the caches.
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
*/
static bool access_vm_reg(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
const struct sys_reg_desc *r)
{
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
bool was_enabled = vcpu_has_cache_enabled(vcpu);
KVM: arm64: Change 32-bit handling of VM system registers We currently handle 32-bit accesses to trapped VM system registers using the 32-bit index into the coproc array on the vcpu structure, which is a union of the coproc array and the sysreg array. Since all the 32-bit coproc indices are created to correspond to the architectural mapping between 64-bit system registers and 32-bit coprocessor registers, and because the AArch64 system registers are the double in size of the AArch32 coprocessor registers, we can always find the system register entry that we must update by dividing the 32-bit coproc index by 2. This is going to make our lives much easier when we have to start accessing system registers that use deferred save/restore and might have to be read directly from the physical CPU. Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-11 21:20:41 +08:00
u64 val;
int reg = r->reg;
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
BUG_ON(!p->is_write);
KVM: arm64: Change 32-bit handling of VM system registers We currently handle 32-bit accesses to trapped VM system registers using the 32-bit index into the coproc array on the vcpu structure, which is a union of the coproc array and the sysreg array. Since all the 32-bit coproc indices are created to correspond to the architectural mapping between 64-bit system registers and 32-bit coprocessor registers, and because the AArch64 system registers are the double in size of the AArch32 coprocessor registers, we can always find the system register entry that we must update by dividing the 32-bit coproc index by 2. This is going to make our lives much easier when we have to start accessing system registers that use deferred save/restore and might have to be read directly from the physical CPU. Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-11 21:20:41 +08:00
/* See the 32bit mapping in kvm_host.h */
if (p->is_aarch32)
reg = r->reg / 2;
if (!p->is_aarch32 || !p->is_32bit) {
val = p->regval;
arm64: KVM: fix 64bit CP15 VM access for 32bit guests Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest) changed the way we handle CP15 VM accesses, so that all 64bit accesses are done via vcpu_sys_reg. This looks like a good idea as it solves indianness issues in an elegant way, except for one small detail: the register index is doesn't refer to the same array! We end up corrupting some random data structure instead. Fix this by reverting to the original code, except for the introduction of a vcpu_cp15_64_high macro that deals with the endianness thing. Tested on Juno with 32bit SMP guests. Cc: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-01 19:00:36 +08:00
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
val = vcpu_read_sys_reg(vcpu, reg);
KVM: arm64: Change 32-bit handling of VM system registers We currently handle 32-bit accesses to trapped VM system registers using the 32-bit index into the coproc array on the vcpu structure, which is a union of the coproc array and the sysreg array. Since all the 32-bit coproc indices are created to correspond to the architectural mapping between 64-bit system registers and 32-bit coprocessor registers, and because the AArch64 system registers are the double in size of the AArch32 coprocessor registers, we can always find the system register entry that we must update by dividing the 32-bit coproc index by 2. This is going to make our lives much easier when we have to start accessing system registers that use deferred save/restore and might have to be read directly from the physical CPU. Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-11 21:20:41 +08:00
if (r->reg % 2)
val = (p->regval << 32) | (u64)lower_32_bits(val);
else
val = ((u64)upper_32_bits(val) << 32) |
lower_32_bits(p->regval);
arm64: KVM: fix 64bit CP15 VM access for 32bit guests Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest) changed the way we handle CP15 VM accesses, so that all 64bit accesses are done via vcpu_sys_reg. This looks like a good idea as it solves indianness issues in an elegant way, except for one small detail: the register index is doesn't refer to the same array! We end up corrupting some random data structure instead. Fix this by reverting to the original code, except for the introduction of a vcpu_cp15_64_high macro that deals with the endianness thing. Tested on Juno with 32bit SMP guests. Cc: Victor Kamensky <victor.kamensky@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-01 19:00:36 +08:00
}
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
vcpu_write_sys_reg(vcpu, val, reg);
ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest Fix issue with 32bit guests running on top of BE KVM host. Indexes of high and low words of 64bit cp15 register are swapped in case of big endian code, since 64bit cp15 state is restored or saved with double word write or read instruction. Define helper macro to access low words of 64bit cp15 register. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-03 00:19:30 +08:00
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
kvm_toggle_cache(vcpu, was_enabled);
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
return true;
}
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
/*
* Trap handler for the GICv3 SGI generation system register.
* Forward the request to the VGIC emulation.
* The cp15_64 code makes sure this automatically works
* for both AArch64 and AArch32 accesses.
*/
static bool access_gic_sgi(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
const struct sys_reg_desc *r)
{
if (!p->is_write)
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
return read_from_write_only(vcpu, p, r);
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
vgic_v3_dispatch_sgi(vcpu, p->regval);
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
return true;
}
arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value When we trap ICC_SRE_EL1, we handle it as RAZ/WI. It would be more correct to actual make it RO, and return the configured value when read. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-25 22:26:37 +08:00
static bool access_gic_sre(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (p->is_write)
return ignore_write(vcpu, p);
p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
return true;
}
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:21:16 +08:00
static bool trap_raz_wi(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:21:16 +08:00
const struct sys_reg_desc *r)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
{
if (p->is_write)
return ignore_write(vcpu, p);
else
return read_zero(vcpu, p);
}
arm64/kvm: Prohibit guest LOR accesses We don't currently limit guest accesses to the LOR registers, which we neither virtualize nor context-switch. As such, guests are provided with unusable information/controls, and are not isolated from each other (or the host). To prevent these issues, we can trap register accesses and present the illusion LORegions are unssupported by the CPU. To do this, we mask ID_AA64MMFR1.LO, and set HCR_EL2.TLOR to trap accesses to the following registers: * LORC_EL1 * LOREA_EL1 * LORID_EL1 * LORN_EL1 * LORSA_EL1 ... when trapped, we inject an UNDEFINED exception to EL1, simulating their non-existence. As noted in D7.2.67, when no LORegions are implemented, LoadLOAcquire and StoreLORelease must behave as LoadAcquire and StoreRelease respectively. We can ensure this by clearing LORC_EL1.EN when a CPU's EL2 is first initialized, as the host kernel will not modify this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-13 21:39:23 +08:00
static bool trap_undef(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
kvm_inject_undefined(vcpu);
return false;
}
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
static bool trap_oslsr_el1(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval = (1 << 3);
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
return true;
}
}
static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
p->regval = read_sysreg(dbgauthstatus_el1);
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
return true;
}
}
/*
* We want to avoid world-switching all the DBG registers all the
* time:
*
* - If we've touched any debug register, it is likely that we're
* going to touch more of them. It then makes sense to disable the
* traps and start doing the save/restore dance
* - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
* then mandatory to save/restore the registers, as the guest
* depends on them.
*
* For this, we use a DIRTY bit, indicating the guest has modified the
* debug registers, used as follow:
*
* On guest entry:
* - If the dirty bit is set (because we're coming back from trapping),
* disable the traps, save host registers, restore guest registers.
* - If debug is actively in use (DBG_MDSCR_KDE or DBG_MDSCR_MDE set),
* set the dirty bit, disable the traps, save host registers,
* restore guest registers.
* - Otherwise, enable the traps
*
* On guest exit:
* - If the dirty bit is set, save guest registers, restore host
* registers and clear the dirty bit. This ensure that the host can
* now use the debug registers.
*/
static bool trap_debug_regs(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
const struct sys_reg_desc *r)
{
if (p->is_write) {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
vcpu_write_sys_reg(vcpu, p->regval, r->reg);
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = vcpu_read_sys_reg(vcpu, r->reg);
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
}
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
return true;
}
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
/*
* reg_to_dbg/dbg_to_reg
*
* A 32 bit write to a debug register leave top bits alone
* A 32 bit read from a debug register only returns the bottom bits
*
* All writes will set the KVM_ARM64_DEBUG_DIRTY flag to ensure the
* hyp.S code switches between host and guest values in future.
*/
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void reg_to_dbg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
u64 *dbg_reg)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
u64 val = p->regval;
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
if (p->is_32bit) {
val &= 0xffffffffUL;
val |= ((*dbg_reg >> 32) << 32);
}
*dbg_reg = val;
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void dbg_to_reg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
u64 *dbg_reg)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval = *dbg_reg;
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
if (p->is_32bit)
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval &= 0xffffffffUL;
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static bool trap_bvr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
if (p->is_write)
reg_to_dbg(vcpu, p, dbg_reg);
else
dbg_to_reg(vcpu, p, dbg_reg);
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return true;
}
static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
arm64: KVM: Fix user access for debug registers When setting the debug register from userspace, make sure that copy_from_user() is called with its parameters in the expected order. It otherwise doesn't do what you think. Fixes: 84e690bfbed1 ("KVM: arm64: introduce vcpu->arch.debug_ptr") Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16 17:54:37 +08:00
if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return -EFAULT;
return 0;
}
static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void reset_bvr(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg] = rd->val;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static bool trap_bcr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
if (p->is_write)
reg_to_dbg(vcpu, p, dbg_reg);
else
dbg_to_reg(vcpu, p, dbg_reg);
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return true;
}
static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
arm64: KVM: Fix user access for debug registers When setting the debug register from userspace, make sure that copy_from_user() is called with its parameters in the expected order. It otherwise doesn't do what you think. Fixes: 84e690bfbed1 ("KVM: arm64: introduce vcpu->arch.debug_ptr") Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16 17:54:37 +08:00
if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return -EFAULT;
return 0;
}
static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void reset_bcr(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg] = rd->val;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static bool trap_wvr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
if (p->is_write)
reg_to_dbg(vcpu, p, dbg_reg);
else
dbg_to_reg(vcpu, p, dbg_reg);
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_trap_reg(__func__, rd->reg, p->is_write,
vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg]);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return true;
}
static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
arm64: KVM: Fix user access for debug registers When setting the debug register from userspace, make sure that copy_from_user() is called with its parameters in the expected order. It otherwise doesn't do what you think. Fixes: 84e690bfbed1 ("KVM: arm64: introduce vcpu->arch.debug_ptr") Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16 17:54:37 +08:00
if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return -EFAULT;
return 0;
}
static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void reset_wvr(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg] = rd->val;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static bool trap_wcr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
if (p->is_write)
reg_to_dbg(vcpu, p, dbg_reg);
else
dbg_to_reg(vcpu, p, dbg_reg);
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return true;
}
static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
arm64: KVM: Fix user access for debug registers When setting the debug register from userspace, make sure that copy_from_user() is called with its parameters in the expected order. It otherwise doesn't do what you think. Fixes: 84e690bfbed1 ("KVM: arm64: introduce vcpu->arch.debug_ptr") Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16 17:54:37 +08:00
if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return -EFAULT;
return 0;
}
static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
return -EFAULT;
return 0;
}
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static void reset_wcr(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg] = rd->val;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
{
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
u64 amair = read_sysreg(amair_el1);
vcpu_write_sys_reg(vcpu, amair, AMAIR_EL1);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
{
arm/arm64: KVM: rework MPIDR assignment and add accessors The virtual MPIDR registers (containing topology information) for the guest are currently mapped linearily to the vcpu_id. Improve this mapping for arm64 by using three levels to not artificially limit the number of vCPUs. To help this, change and rename the kvm_vcpu_get_mpidr() function to mask off the non-affinity bits in the MPIDR register. Also add an accessor to later allow easier access to a vCPU with a given MPIDR. Use this new accessor in the PSCI emulation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-02 21:37:13 +08:00
u64 mpidr;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/*
arm/arm64: KVM: rework MPIDR assignment and add accessors The virtual MPIDR registers (containing topology information) for the guest are currently mapped linearily to the vcpu_id. Improve this mapping for arm64 by using three levels to not artificially limit the number of vCPUs. To help this, change and rename the kvm_vcpu_get_mpidr() function to mask off the non-affinity bits in the MPIDR register. Also add an accessor to later allow easier access to a vCPU with a given MPIDR. Use this new accessor in the PSCI emulation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-02 21:37:13 +08:00
* Map the vcpu_id into the first three affinity level fields of
* the MPIDR. We limit the number of VCPUs in level 0 due to a
* limitation to 16 CPUs in that level in the ICC_SGIxR registers
* of the GICv3 to be able to address each CPU directly when
* sending IPIs.
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
*/
arm/arm64: KVM: rework MPIDR assignment and add accessors The virtual MPIDR registers (containing topology information) for the guest are currently mapped linearily to the vcpu_id. Improve this mapping for arm64 by using three levels to not artificially limit the number of vCPUs. To help this, change and rename the kvm_vcpu_get_mpidr() function to mask off the non-affinity bits in the MPIDR register. Also add an accessor to later allow easier access to a vCPU with a given MPIDR. Use this new accessor in the PSCI emulation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-02 21:37:13 +08:00
mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
vcpu_write_sys_reg(vcpu, (1ULL << 31) | mpidr, MPIDR_EL1);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
{
u64 pmcr, val;
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
pmcr = read_sysreg(pmcr_el0);
/*
* Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
* except PMCR.E resetting to zero.
*/
val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
| (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
}
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags)
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
{
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
u64 reg = __vcpu_sys_reg(vcpu, PMUSERENR_EL0);
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
bool enabled = (reg & flags) || vcpu_mode_priv(vcpu);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
arm64: KVM: PMU: Inject UNDEF exception on illegal register access Both pmu_*_el0_disabled() and pmu_counter_idx_valid() perform checks on the validity of an access, but only return a boolean indicating if the access is valid or not. Let's allow these functions to also inject an UNDEF exception if the access was illegal. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:38 +08:00
if (!enabled)
kvm_inject_undefined(vcpu);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
return !enabled;
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
}
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
static bool pmu_access_el0_disabled(struct kvm_vcpu *vcpu)
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
{
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_EN);
}
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
static bool pmu_write_swinc_el0_disabled(struct kvm_vcpu *vcpu)
{
return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_SW | ARMV8_PMU_USERENR_EN);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
}
static bool pmu_access_cycle_counter_el0_disabled(struct kvm_vcpu *vcpu)
{
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_CR | ARMV8_PMU_USERENR_EN);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
}
static bool pmu_access_event_counter_el0_disabled(struct kvm_vcpu *vcpu)
{
arm64: KVM: PMU: Refactor pmu_*_el0_disabled There is a lot of duplication in the pmu_*_el0_disabled helpers, and as we're going to modify them shortly, let's move all the common stuff in a single function. No functional change. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:37 +08:00
return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_EN);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
}
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 val;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
if (p->is_write) {
/* Only update writeable bits of PMCR */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
val = __vcpu_sys_reg(vcpu, PMCR_EL0);
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
val &= ~ARMV8_PMU_PMCR_MASK;
val |= p->regval & ARMV8_PMU_PMCR_MASK;
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
arm64: KVM: Add helper to handle PMCR register bits According to ARMv8 spec, when writing 1 to PMCR.E, all counters are enabled by PMCNTENSET, while writing 0 to PMCR.E, all counters are disabled. When writing 1 to PMCR.P, reset all event counters, not including PMCCNTR, to zero. When writing 1 to PMCR.C, reset PMCCNTR to zero. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-28 12:10:30 +08:00
kvm_pmu_handle_pmcr(vcpu, val);
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
} else {
/* PMCR.P & PMCR.C are RAZ */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
val = __vcpu_sys_reg(vcpu, PMCR_EL0)
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
& ~(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C);
p->regval = val;
}
return true;
}
arm64: KVM: Add access handler for PMSELR register Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for its reset handler. When reading PMSELR, return the PMSELR.SEL field to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-31 17:20:22 +08:00
static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_event_counter_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for PMSELR register Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for its reset handler. When reading PMSELR, return the PMSELR.SEL field to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-31 17:20:22 +08:00
if (p->is_write)
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMSELR_EL0) = p->regval;
arm64: KVM: Add access handler for PMSELR register Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for its reset handler. When reading PMSELR, return the PMSELR.SEL field to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-31 17:20:22 +08:00
else
/* return PMSELR.SEL field */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, PMSELR_EL0)
arm64: KVM: Add access handler for PMSELR register Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for its reset handler. When reading PMSELR, return the PMSELR.SEL field to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-31 17:20:22 +08:00
& ARMV8_PMU_COUNTER_MASK;
return true;
}
arm64: KVM: Add access handler for PMCEID0 and PMCEID1 register Add access handler which gets host value of PMCEID0 or PMCEID1 when guest access these registers. Writing action to PMCEID0 or PMCEID1 is UNDEFINED. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-07 16:11:12 +08:00
static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 pmceid;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
BUG_ON(p->is_write);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for PMCEID0 and PMCEID1 register Add access handler which gets host value of PMCEID0 or PMCEID1 when guest access these registers. Writing action to PMCEID0 or PMCEID1 is UNDEFINED. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-07 16:11:12 +08:00
if (!(p->Op2 & 1))
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
pmceid = read_sysreg(pmceid0_el0);
arm64: KVM: Add access handler for PMCEID0 and PMCEID1 register Add access handler which gets host value of PMCEID0 or PMCEID1 when guest access these registers. Writing action to PMCEID0 or PMCEID1 is UNDEFINED. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-07 16:11:12 +08:00
else
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
pmceid = read_sysreg(pmceid1_el0);
arm64: KVM: Add access handler for PMCEID0 and PMCEID1 register Add access handler which gets host value of PMCEID0 or PMCEID1 when guest access these registers. Writing action to PMCEID0 or PMCEID1 is UNDEFINED. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-07 16:11:12 +08:00
p->regval = pmceid;
return true;
}
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
{
u64 pmcr, val;
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
arm64: KVM: PMU: Inject UNDEF exception on illegal register access Both pmu_*_el0_disabled() and pmu_counter_idx_valid() perform checks on the validity of an access, but only return a boolean indicating if the access is valid or not. Let's allow these functions to also inject an UNDEF exception if the access was illegal. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:38 +08:00
if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) {
kvm_inject_undefined(vcpu);
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
return false;
arm64: KVM: PMU: Inject UNDEF exception on illegal register access Both pmu_*_el0_disabled() and pmu_counter_idx_valid() perform checks on the validity of an access, but only return a boolean indicating if the access is valid or not. Let's allow these functions to also inject an UNDEF exception if the access was illegal. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:38 +08:00
}
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
return true;
}
static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 idx;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
if (r->CRn == 9 && r->CRm == 13) {
if (r->Op2 == 2) {
/* PMXEVCNTR_EL0 */
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_event_counter_el0_disabled(vcpu))
return false;
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
idx = __vcpu_sys_reg(vcpu, PMSELR_EL0)
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
& ARMV8_PMU_COUNTER_MASK;
} else if (r->Op2 == 0) {
/* PMCCNTR_EL0 */
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_cycle_counter_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
idx = ARMV8_PMU_CYCLE_IDX;
} else {
arm64: KVM: pmu: Fix AArch32 cycle counter access We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-16 17:20:57 +08:00
return false;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
}
arm64: KVM: pmu: Fix AArch32 cycle counter access We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-16 17:20:57 +08:00
} else if (r->CRn == 0 && r->CRm == 9) {
/* PMCCNTR */
if (pmu_access_event_counter_el0_disabled(vcpu))
return false;
idx = ARMV8_PMU_CYCLE_IDX;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
} else if (r->CRn == 14 && (r->CRm & 12) == 8) {
/* PMEVCNTRn_EL0 */
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_event_counter_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
} else {
arm64: KVM: pmu: Fix AArch32 cycle counter access We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Wei Huang <wei@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-16 17:20:57 +08:00
return false;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
}
if (!pmu_counter_idx_valid(vcpu, idx))
return false;
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (p->is_write) {
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
kvm_pmu_set_counter_value(vcpu, idx, p->regval);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
} else {
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
p->regval = kvm_pmu_get_counter_value(vcpu, idx);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
}
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
return true;
}
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 idx, reg;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 1) {
/* PMXEVTYPER_EL0 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
idx = __vcpu_sys_reg(vcpu, PMSELR_EL0) & ARMV8_PMU_COUNTER_MASK;
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
reg = PMEVTYPER0_EL0 + idx;
} else if (r->CRn == 14 && (r->CRm & 12) == 12) {
idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
if (idx == ARMV8_PMU_CYCLE_IDX)
reg = PMCCFILTR_EL0;
else
/* PMEVTYPERn_EL0 */
reg = PMEVTYPER0_EL0 + idx;
} else {
BUG();
}
if (!pmu_counter_idx_valid(vcpu, idx))
return false;
if (p->is_write) {
kvm_pmu_set_counter_event_type(vcpu, p->regval, idx);
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, reg) = p->regval & ARMV8_PMU_EVTYPE_MASK;
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_MASK;
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
}
return true;
}
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 val, mask;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
mask = kvm_pmu_valid_counter_mask(vcpu);
if (p->is_write) {
val = p->regval & mask;
if (r->Op2 & 0x1) {
/* accessing PMCNTENSET_EL0 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
kvm_pmu_enable_counter(vcpu, val);
} else {
/* accessing PMCNTENCLR_EL0 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
kvm_pmu_disable_counter(vcpu, val);
}
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask;
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
}
return true;
}
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 mask = kvm_pmu_valid_counter_mask(vcpu);
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: PMU: Inject UNDEF on non-privileged accesses access_pminten() and access_pmuserenr() can only be accessed when the CPU is in a priviledged mode. If it is not, let's inject an UNDEF exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:39 +08:00
if (!vcpu_mode_priv(vcpu)) {
kvm_inject_undefined(vcpu);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
return false;
arm64: KVM: PMU: Inject UNDEF on non-privileged accesses access_pminten() and access_pmuserenr() can only be accessed when the CPU is in a priviledged mode. If it is not, let's inject an UNDEF exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:39 +08:00
}
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
if (p->is_write) {
u64 val = p->regval & mask;
if (r->Op2 & 0x1)
/* accessing PMINTENSET_EL1 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMINTENSET_EL1) |= val;
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
else
/* accessing PMINTENCLR_EL1 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1) & mask;
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
}
return true;
}
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 mask = kvm_pmu_valid_counter_mask(vcpu);
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_access_el0_disabled(vcpu))
return false;
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
if (p->is_write) {
if (r->CRm & 0x2)
/* accessing PMOVSSET_EL0 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask);
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
else
/* accessing PMOVSCLR_EL0 */
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0) & mask;
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
}
return true;
}
arm64: KVM: Add access handler for PMSWINC register Add access handler which emulates writing and reading PMSWINC register and add support for creating software increment event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:49:39 +08:00
static bool access_pmswinc(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
u64 mask;
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
arm64: KVM: PMU: Inject UNDEF on read access to PMSWINC_EL0 PMSWINC_EL0 is a WO register, so let's UNDEF when reading from it (in the highly hypothetical case where this doesn't UNDEF at EL1). Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:41 +08:00
if (!p->is_write)
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
return read_from_write_only(vcpu, p, r);
arm64: KVM: PMU: Inject UNDEF on read access to PMSWINC_EL0 PMSWINC_EL0 is a WO register, so let's UNDEF when reading from it (in the highly hypothetical case where this doesn't UNDEF at EL1). Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:41 +08:00
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
if (pmu_write_swinc_el0_disabled(vcpu))
return false;
arm64: KVM: PMU: Inject UNDEF on read access to PMSWINC_EL0 PMSWINC_EL0 is a WO register, so let's UNDEF when reading from it (in the highly hypothetical case where this doesn't UNDEF at EL1). Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:41 +08:00
mask = kvm_pmu_valid_counter_mask(vcpu);
kvm_pmu_software_increment(vcpu, p->regval & mask);
return true;
arm64: KVM: Add access handler for PMSWINC register Add access handler which emulates writing and reading PMSWINC register and add support for creating software increment event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:49:39 +08:00
}
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
if (!kvm_arm_pmu_v3_ready(vcpu))
return trap_raz_wi(vcpu, p, r);
if (p->is_write) {
arm64: KVM: PMU: Inject UNDEF on non-privileged accesses access_pminten() and access_pmuserenr() can only be accessed when the CPU is in a priviledged mode. If it is not, let's inject an UNDEF exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:39 +08:00
if (!vcpu_mode_priv(vcpu)) {
kvm_inject_undefined(vcpu);
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
return false;
arm64: KVM: PMU: Inject UNDEF on non-privileged accesses access_pminten() and access_pmuserenr() can only be accessed when the CPU is in a priviledged mode. If it is not, let's inject an UNDEF exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:39 +08:00
}
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
__vcpu_sys_reg(vcpu, PMUSERENR_EL0) =
p->regval & ARMV8_PMU_USERENR_MASK;
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
} else {
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
p->regval = __vcpu_sys_reg(vcpu, PMUSERENR_EL0)
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
& ARMV8_PMU_USERENR_MASK;
}
return true;
}
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
/* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
#define DBG_BCR_BVR_WCR_WVR_EL1(n) \
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_DBGBVRn_EL1(n)), \
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr }, \
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_DBGBCRn_EL1(n)), \
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr }, \
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_DBGWVRn_EL1(n)), \
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
trap_wvr, reset_wvr, n, 0, get_wvr, set_wvr }, \
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_DBGWCRn_EL1(n)), \
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
trap_wcr, reset_wcr, n, 0, get_wcr, set_wcr }
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
/* Macro to expand the PMEVCNTRn_EL0 register */
#define PMU_PMEVCNTR_EL0(n) \
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMEVCNTRn_EL0(n)), \
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
access_pmu_evcntr, reset_unknown, (PMEVCNTR0_EL0 + n), }
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
/* Macro to expand the PMEVTYPERn_EL0 register */
#define PMU_PMEVTYPER_EL0(n) \
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMEVTYPERn_EL0(n)), \
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
KVM: arm64: Add the EL1 physical timer access handler KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle those traps. This results in terminating VMs. Instead, set a handler for the EL1 phys timer access, and inject an undefined exception as an intermediate step. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:07 +08:00
static bool access_cntp_tval(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
u64 now = kvm_phys_timer_read();
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps When trapping on a guest access to one of the timer registers, we were messing with the internals of the timer state from the sysregs handling code, and that logic was about to receive more added complexity when optimizing the timer handling code. Therefore, since we already have timer register access functions (to access registers from userspace), reuse those for the timer register traps from a VM and let the timer code maintain its own consistency. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-17 14:12:06 +08:00
u64 cval;
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps When trapping on a guest access to one of the timer registers, we were messing with the internals of the timer state from the sysregs handling code, and that logic was about to receive more added complexity when optimizing the timer handling code. Therefore, since we already have timer register access functions (to access registers from userspace), reuse those for the timer register traps from a VM and let the timer code maintain its own consistency. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-17 14:12:06 +08:00
if (p->is_write) {
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL,
p->regval + now);
} else {
cval = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL);
p->regval = cval - now;
}
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
KVM: arm64: Add the EL1 physical timer access handler KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle those traps. This results in terminating VMs. Instead, set a handler for the EL1 phys timer access, and inject an undefined exception as an intermediate step. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:07 +08:00
return true;
}
static bool access_cntp_ctl(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps When trapping on a guest access to one of the timer registers, we were messing with the internals of the timer state from the sysregs handling code, and that logic was about to receive more added complexity when optimizing the timer handling code. Therefore, since we already have timer register access functions (to access registers from userspace), reuse those for the timer register traps from a VM and let the timer code maintain its own consistency. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-17 14:12:06 +08:00
if (p->is_write)
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CTL, p->regval);
else
p->regval = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CTL);
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
KVM: arm64: Add the EL1 physical timer access handler KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle those traps. This results in terminating VMs. Instead, set a handler for the EL1 phys timer access, and inject an undefined exception as an intermediate step. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:07 +08:00
return true;
}
static bool access_cntp_cval(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
if (p->is_write)
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps When trapping on a guest access to one of the timer registers, we were messing with the internals of the timer state from the sysregs handling code, and that logic was about to receive more added complexity when optimizing the timer handling code. Therefore, since we already have timer register access functions (to access registers from userspace), reuse those for the timer register traps from a VM and let the timer code maintain its own consistency. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-17 14:12:06 +08:00
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL, p->regval);
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
else
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps When trapping on a guest access to one of the timer registers, we were messing with the internals of the timer state from the sysregs handling code, and that logic was about to receive more added complexity when optimizing the timer handling code. Therefore, since we already have timer register access functions (to access registers from userspace), reuse those for the timer register traps from a VM and let the timer code maintain its own consistency. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-17 14:12:06 +08:00
p->regval = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL);
KVM: arm/arm64: Emulate the EL1 phys timer registers Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:08 +08:00
KVM: arm64: Add the EL1 physical timer access handler KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle those traps. This results in terminating VMs. Instead, set a handler for the EL1 phys timer access, and inject an undefined exception as an intermediate step. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:07 +08:00
return true;
}
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
/* Read a sanitised cpufeature ID register by sys_reg_desc */
static u64 read_id_reg(struct sys_reg_desc const *r, bool raz)
{
u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
(u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
arm64/sve: KVM: Hide SVE from CPU features exposed to guests KVM guests cannot currently use SVE, because SVE is always configured to trap to EL2. However, a guest that sees SVE reported as present in ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to use it. Instead of working, the guest will receive an injected undef exception, which may cause the guest to oops or go into a spin. To avoid misleading the guest into believing that SVE will work, this patch masks out the SVE field from ID_AA64PFR0_EL1 when a guest attempts to read this register. No support is explicitly added for ID_AA64ZFR0_EL1 either, so that is still emulated as reading as zero, which is consistent with SVE not being implemented. This is a temporary measure, and will be removed in a later series when full KVM support for SVE is implemented. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:51:18 +08:00
u64 val = raz ? 0 : read_sanitised_ftr_reg(id);
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
arm64/sve: KVM: Hide SVE from CPU features exposed to guests KVM guests cannot currently use SVE, because SVE is always configured to trap to EL2. However, a guest that sees SVE reported as present in ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to use it. Instead of working, the guest will receive an injected undef exception, which may cause the guest to oops or go into a spin. To avoid misleading the guest into believing that SVE will work, this patch masks out the SVE field from ID_AA64PFR0_EL1 when a guest attempts to read this register. No support is explicitly added for ID_AA64ZFR0_EL1 either, so that is still emulated as reading as zero, which is consistent with SVE not being implemented. This is a temporary measure, and will be removed in a later series when full KVM support for SVE is implemented. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:51:18 +08:00
if (id == SYS_ID_AA64PFR0_EL1) {
if (val & (0xfUL << ID_AA64PFR0_SVE_SHIFT))
pr_err_once("kvm [%i]: SVE unsupported for guests, suppressing\n",
task_pid_nr(current));
val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT);
arm64/kvm: Prohibit guest LOR accesses We don't currently limit guest accesses to the LOR registers, which we neither virtualize nor context-switch. As such, guests are provided with unusable information/controls, and are not isolated from each other (or the host). To prevent these issues, we can trap register accesses and present the illusion LORegions are unssupported by the CPU. To do this, we mask ID_AA64MMFR1.LO, and set HCR_EL2.TLOR to trap accesses to the following registers: * LORC_EL1 * LOREA_EL1 * LORID_EL1 * LORN_EL1 * LORSA_EL1 ... when trapped, we inject an UNDEFINED exception to EL1, simulating their non-existence. As noted in D7.2.67, when no LORegions are implemented, LoadLOAcquire and StoreLORelease must behave as LoadAcquire and StoreRelease respectively. We can ensure this by clearing LORC_EL1.EN when a CPU's EL2 is first initialized, as the host kernel will not modify this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-13 21:39:23 +08:00
} else if (id == SYS_ID_AA64MMFR1_EL1) {
if (val & (0xfUL << ID_AA64MMFR1_LOR_SHIFT))
pr_err_once("kvm [%i]: LORegions unsupported for guests, suppressing\n",
task_pid_nr(current));
val &= ~(0xfUL << ID_AA64MMFR1_LOR_SHIFT);
arm64/sve: KVM: Hide SVE from CPU features exposed to guests KVM guests cannot currently use SVE, because SVE is always configured to trap to EL2. However, a guest that sees SVE reported as present in ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to use it. Instead of working, the guest will receive an injected undef exception, which may cause the guest to oops or go into a spin. To avoid misleading the guest into believing that SVE will work, this patch masks out the SVE field from ID_AA64PFR0_EL1 when a guest attempts to read this register. No support is explicitly added for ID_AA64ZFR0_EL1 either, so that is still emulated as reading as zero, which is consistent with SVE not being implemented. This is a temporary measure, and will be removed in a later series when full KVM support for SVE is implemented. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:51:18 +08:00
}
return val;
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
}
/* cpufeature ID register access trap handlers */
static bool __access_id_reg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r,
bool raz)
{
if (p->is_write)
return write_to_read_only(vcpu, p, r);
p->regval = read_id_reg(r, raz);
return true;
}
static bool access_id_reg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
return __access_id_reg(vcpu, p, r, false);
}
static bool access_raz_id_reg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
{
return __access_id_reg(vcpu, p, r, true);
}
static int reg_from_user(u64 *val, const void __user *uaddr, u64 id);
static int reg_to_user(void __user *uaddr, const u64 *val, u64 id);
static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
/*
* cpufeature ID register user accessors
*
* For now, these registers are immutable for userspace, so no values
* are stored, and for set_id_reg() we don't allow the effective value
* to be changed.
*/
static int __get_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
bool raz)
{
const u64 id = sys_reg_to_index(rd);
const u64 val = read_id_reg(rd, raz);
return reg_to_user(uaddr, &val, id);
}
static int __set_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
bool raz)
{
const u64 id = sys_reg_to_index(rd);
int err;
u64 val;
err = reg_from_user(&val, uaddr, id);
if (err)
return err;
/* This is what we mean by invariant: you can't change it. */
if (val != read_id_reg(rd, raz))
return -EINVAL;
return 0;
}
static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
return __get_id_reg(rd, uaddr, false);
}
static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
return __set_id_reg(rd, uaddr, false);
}
static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
return __get_id_reg(rd, uaddr, true);
}
static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
const struct kvm_one_reg *reg, void __user *uaddr)
{
return __set_id_reg(rd, uaddr, true);
}
/* sys_reg_desc initialiser for known cpufeature ID registers */
#define ID_SANITISED(name) { \
SYS_DESC(SYS_##name), \
.access = access_id_reg, \
.get_user = get_id_reg, \
.set_user = set_id_reg, \
}
/*
* sys_reg_desc initialiser for architecturally unallocated cpufeature ID
* register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
* (1 <= crm < 8, 0 <= Op2 < 8).
*/
#define ID_UNALLOCATED(crm, op2) { \
Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \
.access = access_raz_id_reg, \
.get_user = get_raz_id_reg, \
.set_user = set_raz_id_reg, \
}
/*
* sys_reg_desc initialiser for known ID registers that we hide from guests.
* For now, these are exposed just like unallocated ID regs: they appear
* RAZ for the guest.
*/
#define ID_HIDDEN(name) { \
SYS_DESC(SYS_##name), \
.access = access_raz_id_reg, \
.get_user = get_raz_id_reg, \
.set_user = set_raz_id_reg, \
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/*
* Architected system registers.
* Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:21:16 +08:00
*
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
* Debug handling: We do trap most, if not all debug related system
* registers. The implementation is good enough to ensure that a guest
* can use these with minimal performance degradation. The drawback is
* that we don't implement any of the external debug, none of the
* OSlock protocol. This should be revisited if we ever encounter a
* more demanding guest...
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
*/
static const struct sys_reg_desc sys_reg_descs[] = {
KVM: arm64: Use common Set/Way sys definitions Now that we have common definitions for the encoding of Set/Way cache maintenance operations, make the KVM code use these, simplifying the sys_reg_descs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:51:27 +08:00
{ SYS_DESC(SYS_DC_ISW), access_dcsw },
{ SYS_DESC(SYS_DC_CSW), access_dcsw },
{ SYS_DESC(SYS_DC_CISW), access_dcsw },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
DBG_BCR_BVR_WCR_WVR_EL1(0),
DBG_BCR_BVR_WCR_WVR_EL1(1),
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_MDCCINT_EL1), trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
{ SYS_DESC(SYS_MDSCR_EL1), trap_debug_regs, reset_val, MDSCR_EL1, 0 },
arm64: KVM: add trap handlers for AArch64 debug registers Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:24:46 +08:00
DBG_BCR_BVR_WCR_WVR_EL1(2),
DBG_BCR_BVR_WCR_WVR_EL1(3),
DBG_BCR_BVR_WCR_WVR_EL1(4),
DBG_BCR_BVR_WCR_WVR_EL1(5),
DBG_BCR_BVR_WCR_WVR_EL1(6),
DBG_BCR_BVR_WCR_WVR_EL1(7),
DBG_BCR_BVR_WCR_WVR_EL1(8),
DBG_BCR_BVR_WCR_WVR_EL1(9),
DBG_BCR_BVR_WCR_WVR_EL1(10),
DBG_BCR_BVR_WCR_WVR_EL1(11),
DBG_BCR_BVR_WCR_WVR_EL1(12),
DBG_BCR_BVR_WCR_WVR_EL1(13),
DBG_BCR_BVR_WCR_WVR_EL1(14),
DBG_BCR_BVR_WCR_WVR_EL1(15),
KVM: arm64: Use common debug sysreg definitions Now that we have common definitions for the debug register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1. This is corrected (as is necessary in order to use the common sysreg definition). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 01:19:12 +08:00
{ SYS_DESC(SYS_MDRAR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_OSLAR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_OSLSR_EL1), trap_oslsr_el1 },
{ SYS_DESC(SYS_OSDLR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_DBGPRCR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_DBGCLAIMSET_EL1), trap_raz_wi },
{ SYS_DESC(SYS_DBGCLAIMCLR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_DBGAUTHSTATUS_EL1), trap_dbgauthstatus_el1 },
{ SYS_DESC(SYS_MDCCSR_EL0), trap_raz_wi },
{ SYS_DESC(SYS_DBGDTR_EL0), trap_raz_wi },
// DBGDTR[TR]X_EL0 share the same encoding
{ SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi },
{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
/*
* ID regs: all ID_SANITISED() entries here must have corresponding
* entries in arm64_ftr_regs[].
*/
/* AArch64 mappings of the AArch32 ID registers */
/* CRm=1 */
ID_SANITISED(ID_PFR0_EL1),
ID_SANITISED(ID_PFR1_EL1),
ID_SANITISED(ID_DFR0_EL1),
ID_HIDDEN(ID_AFR0_EL1),
ID_SANITISED(ID_MMFR0_EL1),
ID_SANITISED(ID_MMFR1_EL1),
ID_SANITISED(ID_MMFR2_EL1),
ID_SANITISED(ID_MMFR3_EL1),
/* CRm=2 */
ID_SANITISED(ID_ISAR0_EL1),
ID_SANITISED(ID_ISAR1_EL1),
ID_SANITISED(ID_ISAR2_EL1),
ID_SANITISED(ID_ISAR3_EL1),
ID_SANITISED(ID_ISAR4_EL1),
ID_SANITISED(ID_ISAR5_EL1),
ID_SANITISED(ID_MMFR4_EL1),
ID_UNALLOCATED(2,7),
/* CRm=3 */
ID_SANITISED(MVFR0_EL1),
ID_SANITISED(MVFR1_EL1),
ID_SANITISED(MVFR2_EL1),
ID_UNALLOCATED(3,3),
ID_UNALLOCATED(3,4),
ID_UNALLOCATED(3,5),
ID_UNALLOCATED(3,6),
ID_UNALLOCATED(3,7),
/* AArch64 ID registers */
/* CRm=4 */
ID_SANITISED(ID_AA64PFR0_EL1),
ID_SANITISED(ID_AA64PFR1_EL1),
ID_UNALLOCATED(4,2),
ID_UNALLOCATED(4,3),
ID_UNALLOCATED(4,4),
ID_UNALLOCATED(4,5),
ID_UNALLOCATED(4,6),
ID_UNALLOCATED(4,7),
/* CRm=5 */
ID_SANITISED(ID_AA64DFR0_EL1),
ID_SANITISED(ID_AA64DFR1_EL1),
ID_UNALLOCATED(5,2),
ID_UNALLOCATED(5,3),
ID_HIDDEN(ID_AA64AFR0_EL1),
ID_HIDDEN(ID_AA64AFR1_EL1),
ID_UNALLOCATED(5,6),
ID_UNALLOCATED(5,7),
/* CRm=6 */
ID_SANITISED(ID_AA64ISAR0_EL1),
ID_SANITISED(ID_AA64ISAR1_EL1),
ID_UNALLOCATED(6,2),
ID_UNALLOCATED(6,3),
ID_UNALLOCATED(6,4),
ID_UNALLOCATED(6,5),
ID_UNALLOCATED(6,6),
ID_UNALLOCATED(6,7),
/* CRm=7 */
ID_SANITISED(ID_AA64MMFR0_EL1),
ID_SANITISED(ID_AA64MMFR1_EL1),
ID_SANITISED(ID_AA64MMFR2_EL1),
ID_UNALLOCATED(7,3),
ID_UNALLOCATED(7,4),
ID_UNALLOCATED(7,5),
ID_UNALLOCATED(7,6),
ID_UNALLOCATED(7,7),
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
{ SYS_DESC(SYS_TTBR1_EL1), access_vm_reg, reset_unknown, TTBR1_EL1 },
{ SYS_DESC(SYS_TCR_EL1), access_vm_reg, reset_val, TCR_EL1, 0 },
{ SYS_DESC(SYS_AFSR0_EL1), access_vm_reg, reset_unknown, AFSR0_EL1 },
{ SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 },
{ SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 },
KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA ARMv8.2 adds a new bit HCR_EL2.TEA which routes synchronous external aborts to EL2, and adds a trap control bit HCR_EL2.TERR which traps all Non-secure EL1&0 error record accesses to EL2. This patch enables the two bits for the guest OS, guaranteeing that KVM takes external aborts and traps attempts to access the physical error registers. ERRIDR_EL1 advertises the number of error records, we return zero meaning we can treat all the other registers as RAZ/WI too. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> [removed specific emulation, use trap_raz_wi() directly for everything, rephrased parts of the commit message] Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-16 03:39:06 +08:00
{ SYS_DESC(SYS_ERRIDR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERRSELR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXFR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXCTLR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXSTATUS_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXADDR_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi },
{ SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi },
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMINTENSET_EL1), access_pminten, reset_unknown, PMINTENSET_EL1 },
{ SYS_DESC(SYS_PMINTENCLR_EL1), access_pminten, NULL, PMINTENSET_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 },
{ SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
arm64/kvm: Prohibit guest LOR accesses We don't currently limit guest accesses to the LOR registers, which we neither virtualize nor context-switch. As such, guests are provided with unusable information/controls, and are not isolated from each other (or the host). To prevent these issues, we can trap register accesses and present the illusion LORegions are unssupported by the CPU. To do this, we mask ID_AA64MMFR1.LO, and set HCR_EL2.TLOR to trap accesses to the following registers: * LORC_EL1 * LOREA_EL1 * LORID_EL1 * LORN_EL1 * LORSA_EL1 ... when trapped, we inject an UNDEFINED exception to EL1, simulating their non-existence. As noted in D7.2.67, when no LORegions are implemented, LoadLOAcquire and StoreLORelease must behave as LoadAcquire and StoreRelease respectively. We can ensure this by clearing LORC_EL1.EN when a CPU's EL2 is first initialized, as the host kernel will not modify this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-13 21:39:23 +08:00
{ SYS_DESC(SYS_LORSA_EL1), trap_undef },
{ SYS_DESC(SYS_LOREA_EL1), trap_undef },
{ SYS_DESC(SYS_LORN_EL1), trap_undef },
{ SYS_DESC(SYS_LORC_EL1), trap_undef },
{ SYS_DESC(SYS_LORID_EL1), trap_undef },
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_VBAR_EL1), NULL, reset_val, VBAR_EL1, 0 },
KVM: arm64: Save/Restore guest DISR_EL1 If we deliver a virtual SError to the guest, the guest may defer it with an ESB instruction. The guest reads the deferred value via DISR_EL1, but the guests view of DISR_EL1 is re-mapped to VDISR_EL2 when HCR_EL2.AMO is set. Add the KVM code to save/restore VDISR_EL2, and make it accessible to userspace as DISR_EL1. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-16 03:39:02 +08:00
{ SYS_DESC(SYS_DISR_EL1), NULL, reset_val, DISR_EL1, 0 },
arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-19 19:23:54 +08:00
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
{ SYS_DESC(SYS_ICC_IAR0_EL1), write_to_read_only },
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
{ SYS_DESC(SYS_ICC_EOIR0_EL1), read_from_write_only },
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
{ SYS_DESC(SYS_ICC_HPPIR0_EL1), write_to_read_only },
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
{ SYS_DESC(SYS_ICC_DIR_EL1), read_from_write_only },
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
{ SYS_DESC(SYS_ICC_RPR_EL1), write_to_read_only },
KVM: arm64: Use common GICv3 sysreg definitions Now that we have common definitions for the GICv3 register encodings, make the KVM code use these, simplifying the sys_reg_descs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 02:02:39 +08:00
{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
{ SYS_DESC(SYS_ICC_IAR1_EL1), write_to_read_only },
KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:55 +08:00
{ SYS_DESC(SYS_ICC_EOIR1_EL1), read_from_write_only },
KVM: arm64: Log an error if trapping a write-to-read-only GICv3 access A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-09 19:49:56 +08:00
{ SYS_DESC(SYS_ICC_HPPIR1_EL1), write_to_read_only },
KVM: arm64: Use common GICv3 sysreg definitions Now that we have common definitions for the GICv3 register encodings, make the KVM code use these, simplifying the sys_reg_descs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 02:02:39 +08:00
{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-19 19:23:54 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_CSSELR_EL1), NULL, reset_unknown, CSSELR_EL1 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
{ SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 },
{ SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 },
{ SYS_DESC(SYS_PMSWINC_EL0), access_pmswinc, reset_unknown, PMSWINC_EL0 },
{ SYS_DESC(SYS_PMSELR_EL0), access_pmselr, reset_unknown, PMSELR_EL0 },
{ SYS_DESC(SYS_PMCEID0_EL0), access_pmceid },
{ SYS_DESC(SYS_PMCEID1_EL0), access_pmceid },
{ SYS_DESC(SYS_PMCCNTR_EL0), access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
{ SYS_DESC(SYS_PMXEVTYPER_EL0), access_pmu_evtyper },
{ SYS_DESC(SYS_PMXEVCNTR_EL0), access_pmu_evcntr },
/*
* PMUSERENR_EL0 resets as unknown in 64bit mode while it resets as zero
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
* in 32bit mode. Here we choose to reset it as zero for consistency.
*/
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMUSERENR_EL0), access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
{ SYS_DESC(SYS_PMOVSSET_EL0), access_pmovs, reset_unknown, PMOVSSET_EL0 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
KVM: arm64: Use common physical timer sysreg definitions Now that we have common definitions for the physical timer control registers, make the KVM code use these, simplifying the sys_reg_descs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-03-10 00:50:51 +08:00
{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_cntp_tval },
{ SYS_DESC(SYS_CNTP_CTL_EL0), access_cntp_ctl },
{ SYS_DESC(SYS_CNTP_CVAL_EL0), access_cntp_cval },
KVM: arm64: Add the EL1 physical timer access handler KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle those traps. This results in terminating VMs. Instead, set a handler for the EL1 phys timer access, and inject an undefined exception as an intermediate step. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 23:20:07 +08:00
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
/* PMEVCNTRn_EL0 */
PMU_PMEVCNTR_EL0(0),
PMU_PMEVCNTR_EL0(1),
PMU_PMEVCNTR_EL0(2),
PMU_PMEVCNTR_EL0(3),
PMU_PMEVCNTR_EL0(4),
PMU_PMEVCNTR_EL0(5),
PMU_PMEVCNTR_EL0(6),
PMU_PMEVCNTR_EL0(7),
PMU_PMEVCNTR_EL0(8),
PMU_PMEVCNTR_EL0(9),
PMU_PMEVCNTR_EL0(10),
PMU_PMEVCNTR_EL0(11),
PMU_PMEVCNTR_EL0(12),
PMU_PMEVCNTR_EL0(13),
PMU_PMEVCNTR_EL0(14),
PMU_PMEVCNTR_EL0(15),
PMU_PMEVCNTR_EL0(16),
PMU_PMEVCNTR_EL0(17),
PMU_PMEVCNTR_EL0(18),
PMU_PMEVCNTR_EL0(19),
PMU_PMEVCNTR_EL0(20),
PMU_PMEVCNTR_EL0(21),
PMU_PMEVCNTR_EL0(22),
PMU_PMEVCNTR_EL0(23),
PMU_PMEVCNTR_EL0(24),
PMU_PMEVCNTR_EL0(25),
PMU_PMEVCNTR_EL0(26),
PMU_PMEVCNTR_EL0(27),
PMU_PMEVCNTR_EL0(28),
PMU_PMEVCNTR_EL0(29),
PMU_PMEVCNTR_EL0(30),
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
/* PMEVTYPERn_EL0 */
PMU_PMEVTYPER_EL0(0),
PMU_PMEVTYPER_EL0(1),
PMU_PMEVTYPER_EL0(2),
PMU_PMEVTYPER_EL0(3),
PMU_PMEVTYPER_EL0(4),
PMU_PMEVTYPER_EL0(5),
PMU_PMEVTYPER_EL0(6),
PMU_PMEVTYPER_EL0(7),
PMU_PMEVTYPER_EL0(8),
PMU_PMEVTYPER_EL0(9),
PMU_PMEVTYPER_EL0(10),
PMU_PMEVTYPER_EL0(11),
PMU_PMEVTYPER_EL0(12),
PMU_PMEVTYPER_EL0(13),
PMU_PMEVTYPER_EL0(14),
PMU_PMEVTYPER_EL0(15),
PMU_PMEVTYPER_EL0(16),
PMU_PMEVTYPER_EL0(17),
PMU_PMEVTYPER_EL0(18),
PMU_PMEVTYPER_EL0(19),
PMU_PMEVTYPER_EL0(20),
PMU_PMEVTYPER_EL0(21),
PMU_PMEVTYPER_EL0(22),
PMU_PMEVTYPER_EL0(23),
PMU_PMEVTYPER_EL0(24),
PMU_PMEVTYPER_EL0(25),
PMU_PMEVTYPER_EL0(26),
PMU_PMEVTYPER_EL0(27),
PMU_PMEVTYPER_EL0(28),
PMU_PMEVTYPER_EL0(29),
PMU_PMEVTYPER_EL0(30),
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
/*
* PMCCFILTR_EL0 resets as unknown in 64bit mode while it resets as zero
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
* in 32bit mode. Here we choose to reset it as zero for consistency.
*/
KVM: arm64: Use common performance monitor sysreg definitions Now that we have common definitions for the performance monitor register encodings, make the KVM code use these, simplifying the sys_reg_descs table. The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these describe non-obvious details regarding the registers. However, a slight fixup is applied to bring these into line with the usual comment style. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-21 01:43:20 +08:00
{ SYS_DESC(SYS_PMCCFILTR_EL0), access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
KVM: arm64: Use common sysreg definitions Now that we have common definitions for the remaining register encodings required by KVM, make the KVM code use these, simplifying the sys_reg_descs table and the genericv8_sys_regs table. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-20 02:39:39 +08:00
{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
{ SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x70 },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
};
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
static bool trap_dbgidr(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
const struct sys_reg_desc *r)
{
if (p->is_write) {
return ignore_write(vcpu, p);
} else {
arm64: cpufeature: Make ID reg accessor naming less counterintuitive read_system_reg() can readily be confused with read_sysreg(), whereas these are really quite different in their meaning. This patches attempts to reduce the ambiguity be reserving "sysreg" for the actual system register accessors. read_system_reg() is instead renamed to read_sanitised_ftr_reg(), to make it more obvious that the Linux-defined sanitised feature register cache is being accessed here, not the underlying architectural system registers. cpufeature.c's internal __raw_read_system_reg() function is renamed in line with its actual purpose: a form of read_sysreg() that indexes on (non-compiletime-constant) encoding rather than symbolic register name. Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-23 23:14:39 +08:00
u64 dfr = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
u64 pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
arm64: Rename cpuid_feature field extract routines Now that we have a clear understanding of the sign of a feature, rename the routines to reflect the sign, so that it is not misused. The cpuid_feature_extract_field() now accepts a 'sign' parameter. Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 18:58:16 +08:00
u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL3_SHIFT);
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) |
(((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) |
(((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20)
| (6 << 16) | (el3 << 14) | (el3 << 12));
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
return true;
}
}
static bool trap_debug32(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *p,
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
const struct sys_reg_desc *r)
{
if (p->is_write) {
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
vcpu_cp14(vcpu, r->reg) = p->regval;
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval = vcpu_cp14(vcpu, r->reg);
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
}
return true;
}
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
/* AArch32 debug register mappings
*
* AArch32 DBGBVRn is mapped to DBGBVRn_EL1[31:0]
* AArch32 DBGBXVRn is mapped to DBGBVRn_EL1[63:32]
*
* All control registers and watchpoint value registers are mapped to
* the lower 32 bits of their AArch64 equivalents. We share the trap
* handlers with the above AArch64 code which checks what mode the
* system is in.
*/
arm64: KVM: debug: Remove spurious inline attributes The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 23:41:12 +08:00
static bool trap_xvr(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *rd)
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
{
u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
if (p->is_write) {
u64 val = *dbg_reg;
val &= 0xffffffffUL;
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
val |= p->regval << 32;
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
*dbg_reg = val;
vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
p->regval = *dbg_reg >> 32;
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
}
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
return true;
}
#define DBG_BCR_BVR_WCR_WVR(n) \
/* DBGBVRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_bvr, NULL, n }, \
/* DBGBCRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_bcr, NULL, n }, \
/* DBGWVRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_wvr, NULL, n }, \
/* DBGWCRn */ \
{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_wcr, NULL, n }
#define DBGBXVR(n) \
{ Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_xvr, NULL, n }
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
/*
* Trapped cp14 registers. We generally ignore most of the external
* debug, on the principle that they don't really make sense to a
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
* guest. Revisit this one day, would this principle change.
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
static const struct sys_reg_desc cp14_regs[] = {
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
/* DBGIDR */
{ Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgidr },
/* DBGDTRRXext */
{ Op1( 0), CRn( 0), CRm( 0), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(0),
/* DBGDSCRint */
{ Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(1),
/* DBGDCCINT */
{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 },
/* DBGDSCRext */
{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 },
DBG_BCR_BVR_WCR_WVR(2),
/* DBGDTR[RT]Xint */
{ Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
/* DBGDTR[RT]Xext */
{ Op1( 0), CRn( 0), CRm( 3), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(3),
DBG_BCR_BVR_WCR_WVR(4),
DBG_BCR_BVR_WCR_WVR(5),
/* DBGWFAR */
{ Op1( 0), CRn( 0), CRm( 6), Op2( 0), trap_raz_wi },
/* DBGOSECCR */
{ Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
DBG_BCR_BVR_WCR_WVR(6),
/* DBGVCR */
{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 },
DBG_BCR_BVR_WCR_WVR(7),
DBG_BCR_BVR_WCR_WVR(8),
DBG_BCR_BVR_WCR_WVR(9),
DBG_BCR_BVR_WCR_WVR(10),
DBG_BCR_BVR_WCR_WVR(11),
DBG_BCR_BVR_WCR_WVR(12),
DBG_BCR_BVR_WCR_WVR(13),
DBG_BCR_BVR_WCR_WVR(14),
DBG_BCR_BVR_WCR_WVR(15),
/* DBGDRAR (32bit) */
{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), trap_raz_wi },
DBGBXVR(0),
/* DBGOSLAR */
{ Op1( 0), CRn( 1), CRm( 0), Op2( 4), trap_raz_wi },
DBGBXVR(1),
/* DBGOSLSR */
{ Op1( 0), CRn( 1), CRm( 1), Op2( 4), trap_oslsr_el1 },
DBGBXVR(2),
DBGBXVR(3),
/* DBGOSDLR */
{ Op1( 0), CRn( 1), CRm( 3), Op2( 4), trap_raz_wi },
DBGBXVR(4),
/* DBGPRCR */
{ Op1( 0), CRn( 1), CRm( 4), Op2( 4), trap_raz_wi },
DBGBXVR(5),
DBGBXVR(6),
DBGBXVR(7),
DBGBXVR(8),
DBGBXVR(9),
DBGBXVR(10),
DBGBXVR(11),
DBGBXVR(12),
DBGBXVR(13),
DBGBXVR(14),
DBGBXVR(15),
/* DBGDSAR (32bit) */
{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), trap_raz_wi },
/* DBGDEVID2 */
{ Op1( 0), CRn( 7), CRm( 0), Op2( 7), trap_raz_wi },
/* DBGDEVID1 */
{ Op1( 0), CRn( 7), CRm( 1), Op2( 7), trap_raz_wi },
/* DBGDEVID */
{ Op1( 0), CRn( 7), CRm( 2), Op2( 7), trap_raz_wi },
/* DBGCLAIMSET */
{ Op1( 0), CRn( 7), CRm( 8), Op2( 6), trap_raz_wi },
/* DBGCLAIMCLR */
{ Op1( 0), CRn( 7), CRm( 9), Op2( 6), trap_raz_wi },
/* DBGAUTHSTATUS */
{ Op1( 0), CRn( 7), CRm(14), Op2( 6), trap_dbgauthstatus_el1 },
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
};
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 21:11:48 +08:00
/* Trapped cp14 64bit registers */
static const struct sys_reg_desc cp14_64_regs[] = {
arm64: KVM: add trap handlers for AArch32 debug registers Add handlers for all the AArch32 debug registers that are accessible from EL0 or EL1. The code follow the same strategy as the AArch64 counterpart with regards to tracking the dirty state of the debug registers. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:31:37 +08:00
/* DBGDRAR (64bit) */
{ Op1( 0), CRm( 1), .access = trap_raz_wi },
/* DBGDSAR (64bit) */
{ Op1( 0), CRm( 2), .access = trap_raz_wi },
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 21:11:48 +08:00
};
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
/* Macro to expand the PMEVCNTRn register */
#define PMU_PMEVCNTR(n) \
/* PMEVCNTRn */ \
{ Op1(0), CRn(0b1110), \
CRm((0b1000 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)), \
access_pmu_evcntr }
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
/* Macro to expand the PMEVTYPERn register */
#define PMU_PMEVTYPER(n) \
/* PMEVTYPERn */ \
{ Op1(0), CRn(0b1110), \
CRm((0b1100 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)), \
access_pmu_evtyper }
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
/*
* Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
* depending on the way they are accessed (as a 32bit or a 64bit
* register).
*/
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
static const struct sys_reg_desc cp15_regs[] = {
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
{ Op1( 0), CRn( 0), CRm(12), Op2( 0), access_gic_sgi },
arm/arm64: KVM: Use set/way op trapping to track the state of the caches Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-20 00:05:31 +08:00
{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), access_vm_reg, NULL, c1_SCTLR },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
{ Op1( 0), CRn( 3), CRm( 0), Op2( 0), access_vm_reg, NULL, c3_DACR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 0), access_vm_reg, NULL, c5_DFSR },
{ Op1( 0), CRn( 5), CRm( 0), Op2( 1), access_vm_reg, NULL, c5_IFSR },
{ Op1( 0), CRn( 5), CRm( 1), Op2( 0), access_vm_reg, NULL, c5_ADFSR },
{ Op1( 0), CRn( 5), CRm( 1), Op2( 1), access_vm_reg, NULL, c5_AIFSR },
{ Op1( 0), CRn( 6), CRm( 0), Op2( 0), access_vm_reg, NULL, c6_DFAR },
{ Op1( 0), CRn( 6), CRm( 0), Op2( 2), access_vm_reg, NULL, c6_IFAR },
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
/*
* DC{C,I,CI}SW operations:
*/
{ Op1( 0), CRn( 7), CRm( 6), Op2( 2), access_dcsw },
{ Op1( 0), CRn( 7), CRm(10), Op2( 2), access_dcsw },
{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
arm64: KVM: rename pm_fake handler to trap_raz_wi pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:21:16 +08:00
/* PMU */
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmcr },
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 1), access_pmcnten },
{ Op1( 0), CRn( 9), CRm(12), Op2( 2), access_pmcnten },
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 3), access_pmovs },
arm64: KVM: Add access handler for PMSWINC register Add access handler which emulates writing and reading PMSWINC register and add support for creating software increment event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:49:39 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 4), access_pmswinc },
arm64: KVM: Add access handler for PMSELR register Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for its reset handler. When reading PMSELR, return the PMSELR.SEL field to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-08-31 17:20:22 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 5), access_pmselr },
arm64: KVM: Add access handler for PMCEID0 and PMCEID1 register Add access handler which gets host value of PMCEID0 or PMCEID1 when guest access these registers. Writing action to PMCEID0 or PMCEID1 is UNDEFINED. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-07 16:11:12 +08:00
{ Op1( 0), CRn( 9), CRm(12), Op2( 6), access_pmceid },
{ Op1( 0), CRn( 9), CRm(12), Op2( 7), access_pmceid },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
{ Op1( 0), CRn( 9), CRm(13), Op2( 0), access_pmu_evcntr },
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
{ Op1( 0), CRn( 9), CRm(13), Op2( 1), access_pmu_evtyper },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
{ Op1( 0), CRn( 9), CRm(13), Op2( 2), access_pmu_evcntr },
arm64: KVM: Add access handler for PMUSERENR register This register resets as unknown in 64bit mode while it resets as zero in 32bit mode. Here we choose to reset it as zero for consistency. PMUSERENR_EL0 holds some bits which decide whether PMU registers can be accessed from EL0. Add some check helpers to handle the access from EL0. When these bits are zero, only reading PMUSERENR will trap to EL2 and writing PMUSERENR or reading/writing other PMU registers will trap to EL1 other than EL2 when HCR.TGE==0. To current KVM configuration (HCR.TGE==0) there is no way to get these traps. Here we write 0xf to physical PMUSERENR register on VM entry, so that it will trap PMU access from EL0 to EL2. Within the register access handler we check the real value of guest PMUSERENR register to decide whether this access is allowed. If not allowed, return false to inject UND to guest. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:15:56 +08:00
{ Op1( 0), CRn( 9), CRm(14), Op2( 0), access_pmuserenr },
arm64: KVM: Add access handler for PMINTENSET and PMINTENCLR register Since the reset value of PMINTENSET and PMINTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMINTENSET or PMINTENCLR register. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 14:40:20 +08:00
{ Op1( 0), CRn( 9), CRm(14), Op2( 1), access_pminten },
{ Op1( 0), CRn( 9), CRm(14), Op2( 2), access_pminten },
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
{ Op1( 0), CRn( 9), CRm(14), Op2( 3), access_pmovs },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
{ Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, c10_PRRR },
{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
{ Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, c10_AMAIR0 },
{ Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, c10_AMAIR1 },
arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-19 19:23:54 +08:00
/* ICC_SRE */
arm64: KVM: report configured SRE value to 32-bit world After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value") we report SRE value to 64-bit guest, but 32-bit one still handled as RAZ/WI what leads to funny promise we do not keep: "GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead" Instead, return the actual value of the ICC_SRE_EL1 register that the guest should see. [ Tweaked commit message - Christoffer ] Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-10 17:49:43 +08:00
{ Op1( 0), CRn(12), CRm(12), Op2( 5), access_gic_sre },
arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WI When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-19 19:23:54 +08:00
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
KVM: arm64: Enable the EL1 physical timer for AArch32 guests Some 32bits guest OS can use the CNTP timer, however KVM does not handle the accesses, injecting a fault instead. Use the proper handlers to emulate the EL1 Physical Timer (CNTP) register accesses of AArch32 guests. Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com> Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-08 19:57:19 +08:00
/* CNTP_TVAL */
{ Op1( 0), CRn(14), CRm( 2), Op2( 0), access_cntp_tval },
/* CNTP_CTL */
{ Op1( 0), CRn(14), CRm( 2), Op2( 1), access_cntp_ctl },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
/* PMEVCNTRn */
PMU_PMEVCNTR(0),
PMU_PMEVCNTR(1),
PMU_PMEVCNTR(2),
PMU_PMEVCNTR(3),
PMU_PMEVCNTR(4),
PMU_PMEVCNTR(5),
PMU_PMEVCNTR(6),
PMU_PMEVCNTR(7),
PMU_PMEVCNTR(8),
PMU_PMEVCNTR(9),
PMU_PMEVCNTR(10),
PMU_PMEVCNTR(11),
PMU_PMEVCNTR(12),
PMU_PMEVCNTR(13),
PMU_PMEVCNTR(14),
PMU_PMEVCNTR(15),
PMU_PMEVCNTR(16),
PMU_PMEVCNTR(17),
PMU_PMEVCNTR(18),
PMU_PMEVCNTR(19),
PMU_PMEVCNTR(20),
PMU_PMEVCNTR(21),
PMU_PMEVCNTR(22),
PMU_PMEVCNTR(23),
PMU_PMEVCNTR(24),
PMU_PMEVCNTR(25),
PMU_PMEVCNTR(26),
PMU_PMEVCNTR(27),
PMU_PMEVCNTR(28),
PMU_PMEVCNTR(29),
PMU_PMEVCNTR(30),
arm64: KVM: Add access handler for event type register These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER which is mapped to PMEVTYPERn or PMCCFILTR. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When writing to these registers, create a perf_event for the selected event type. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 11:11:27 +08:00
/* PMEVTYPERn */
PMU_PMEVTYPER(0),
PMU_PMEVTYPER(1),
PMU_PMEVTYPER(2),
PMU_PMEVTYPER(3),
PMU_PMEVTYPER(4),
PMU_PMEVTYPER(5),
PMU_PMEVTYPER(6),
PMU_PMEVTYPER(7),
PMU_PMEVTYPER(8),
PMU_PMEVTYPER(9),
PMU_PMEVTYPER(10),
PMU_PMEVTYPER(11),
PMU_PMEVTYPER(12),
PMU_PMEVTYPER(13),
PMU_PMEVTYPER(14),
PMU_PMEVTYPER(15),
PMU_PMEVTYPER(16),
PMU_PMEVTYPER(17),
PMU_PMEVTYPER(18),
PMU_PMEVTYPER(19),
PMU_PMEVTYPER(20),
PMU_PMEVTYPER(21),
PMU_PMEVTYPER(22),
PMU_PMEVTYPER(23),
PMU_PMEVTYPER(24),
PMU_PMEVTYPER(25),
PMU_PMEVTYPER(26),
PMU_PMEVTYPER(27),
PMU_PMEVTYPER(28),
PMU_PMEVTYPER(29),
PMU_PMEVTYPER(30),
/* PMCCFILTR */
{ Op1(0), CRn(14), CRm(15), Op2(7), access_pmu_evtyper },
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 21:11:48 +08:00
};
static const struct sys_reg_desc cp15_64_regs[] = {
{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
{ Op1( 0), CRn( 0), CRm( 9), Op2( 0), access_pmu_evcntr },
arm64: KVM: add SGI generation register emulation While the generation of a (virtual) inter-processor interrupt (SGI) on a GICv2 works by writing to a MMIO register, GICv3 uses the system register ICC_SGI1R_EL1 to trigger them. Add a trap handler function that calls the new SGI register handler in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0, this will not trap yet, but will only be used later when all the data structures have been initialized properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-06-03 16:13:13 +08:00
{ Op1( 0), CRn( 0), CRm(12), Op2( 0), access_gic_sgi },
arm64: KVM: trap VM system registers until MMU and caches are ON In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-15 02:00:55 +08:00
{ Op1( 1), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR1 },
KVM: arm64: Enable the EL1 physical timer for AArch32 guests Some 32bits guest OS can use the CNTP timer, however KVM does not handle the accesses, injecting a fault instead. Use the proper handlers to emulate the EL1 Physical Timer (CNTP) register accesses of AArch32 guests. Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com> Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-08 19:57:19 +08:00
{ Op1( 2), CRn( 0), CRm(14), Op2( 0), access_cntp_cval },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
};
/* Target specific emulation tables */
static struct kvm_sys_reg_target_table *target_tables[KVM_ARM_NUM_TARGETS];
void kvm_register_target_sys_reg_table(unsigned int target,
struct kvm_sys_reg_target_table *table)
{
target_tables[target] = table;
}
/* Get specific register table for this target. */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
static const struct sys_reg_desc *get_target_table(unsigned target,
bool mode_is_64,
size_t *num)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
{
struct kvm_sys_reg_target_table *table;
table = target_tables[target];
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
if (mode_is_64) {
*num = table->table64.num;
return table->table64.table;
} else {
*num = table->table32.num;
return table->table32.table;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
arm64: KVM: Switch the sys_reg search to be a binary search Our 64bit sys_reg table is about 90 entries long (so far, and the PMU support is likely to increase this). This means that on average, it takes 45 comparaisons to find the right entry (and actually the full 90 if we have to search the invariant table). Not the most efficient thing. Specially when you think that this table is already sorted. Switching to a binary search effectively reduces the search to about 7 comparaisons. Slightly better! As an added bonus, the comparison is done by comparing all the fields at once, instead of one at a time. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-22 02:27:04 +08:00
#define reg_to_match_value(x) \
({ \
unsigned long val; \
val = (x)->Op0 << 14; \
val |= (x)->Op1 << 11; \
val |= (x)->CRn << 7; \
val |= (x)->CRm << 3; \
val |= (x)->Op2; \
val; \
})
static int match_sys_reg(const void *key, const void *elt)
{
const unsigned long pval = (unsigned long)key;
const struct sys_reg_desc *r = elt;
return pval - reg_to_match_value(r);
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
const struct sys_reg_desc table[],
unsigned int num)
{
arm64: KVM: Switch the sys_reg search to be a binary search Our 64bit sys_reg table is about 90 entries long (so far, and the PMU support is likely to increase this). This means that on average, it takes 45 comparaisons to find the right entry (and actually the full 90 if we have to search the invariant table). Not the most efficient thing. Specially when you think that this table is already sorted. Switching to a binary search effectively reduces the search to about 7 comparaisons. Slightly better! As an added bonus, the comparison is done by comparing all the fields at once, instead of one at a time. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-22 02:27:04 +08:00
unsigned long pval = reg_to_match_value(params);
return bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
kvm_inject_undefined(vcpu);
return 1;
}
arm64: KVM: Treat sysreg accessors returning false as successful Instead of considering that a sysreg accessor has failed when returning false, let's consider that it is *always* successful (after all, we won't stand for an incomplete emulation). The return value now simply indicates whether we should skip the instruction (because it has now been emulated), or if we should leave the PC alone if the emulation has injected an exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:42 +08:00
static void perform_access(struct kvm_vcpu *vcpu,
struct sys_reg_params *params,
const struct sys_reg_desc *r)
{
/*
* Not having an accessor means that we have configured a trap
* that we don't know how to handle. This certainly qualifies
* as a gross bug that should be fixed right away.
*/
BUG_ON(!r->access);
/* Skip instruction if instructed so */
if (likely(r->access(vcpu, params, r)))
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
/*
* emulate_cp -- tries to match a sys_reg access in a handling table, and
* call the corresponding trap handler.
*
* @params: pointer to the descriptor of the access
* @table: array of trap descriptors
* @num: size of the trap descriptor array
*
* Return 0 if the access has been handled, and -1 if not.
*/
static int emulate_cp(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *params,
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
const struct sys_reg_desc *table,
size_t num)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
{
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
const struct sys_reg_desc *r;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
if (!table)
return -1; /* Not handled */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
r = find_reg(params, table, num);
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
if (r) {
arm64: KVM: Treat sysreg accessors returning false as successful Instead of considering that a sysreg accessor has failed when returning false, let's consider that it is *always* successful (after all, we won't stand for an incomplete emulation). The return value now simply indicates whether we should skip the instruction (because it has now been emulated), or if we should leave the PC alone if the emulation has injected an exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:42 +08:00
perform_access(vcpu, params, r);
return 0;
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
}
/* Not handled */
return -1;
}
static void unhandled_cp_access(struct kvm_vcpu *vcpu,
struct sys_reg_params *params)
{
u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu);
arm64: KVM: Clean up a condition My static checker complains that this condition looks like it should be == instead of =. This isn't a fast path, so we don't need to be fancy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-14 18:19:34 +08:00
int cp = -1;
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
switch(hsr_ec) {
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
case ESR_ELx_EC_CP15_32:
case ESR_ELx_EC_CP15_64:
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
cp = 15;
break;
arm64: kvm: move to ESR_ELx macros Now that we have common ESR_ELx macros, make use of them in the arm64 KVM code. The addition of <asm/esr.h> to the include path highlighted badly ordered (i.e. not alphabetical) include lists; these are changed to alphabetical order. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Will Deacon <will.deacon@arm.com>
2014-11-24 21:59:30 +08:00
case ESR_ELx_EC_CP14_MR:
case ESR_ELx_EC_CP14_64:
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
cp = 14;
break;
default:
arm64: KVM: Clean up a condition My static checker complains that this condition looks like it should be == instead of =. This isn't a fast path, so we don't need to be fancy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-14 18:19:34 +08:00
WARN_ON(1);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
kvm_err("Unsupported guest CP%d access at: %08lx\n",
cp, *vcpu_pc(vcpu));
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
print_sys_reg_instr(params);
kvm_inject_undefined(vcpu);
}
/**
arm64: KVM: Fix comments of the CP handler Make sure the documentation reflects the actual name of the functions. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-13 17:16:40 +08:00
* kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *global,
size_t nr_global,
const struct sys_reg_desc *target_specific,
size_t nr_specific)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
{
struct sys_reg_params params;
u32 hsr = kvm_vcpu_get_hsr(vcpu);
arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling the trapped system registers, completely missing the fact that the fields for Rt and Rt2 are now 5 bit wide, and not 4... Let's fix it, and provide an accessor for the most common Rt case. Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-28 02:06:48 +08:00
int Rt = kvm_vcpu_sys_get_rt(vcpu);
int Rt2 = (hsr >> 10) & 0x1f;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 18:55:17 +08:00
params.is_aarch32 = true;
params.is_32bit = false;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
params.CRm = (hsr >> 1) & 0xf;
params.is_write = ((hsr & 1) == 0);
params.Op0 = 0;
params.Op1 = (hsr >> 16) & 0xf;
params.Op2 = 0;
params.CRn = 0;
/*
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
* Make a 64-bit value out of Rt and Rt2. As we use the same trap
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
* backends between AArch32 and AArch64, we get away with it.
*/
if (params.is_write) {
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
params.regval = vcpu_get_reg(vcpu, Rt) & 0xffffffff;
params.regval |= vcpu_get_reg(vcpu, Rt2) << 32;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
}
arm64: KVM: Do not corrupt registers on failed 64bit CP read If we fail to emulate a mrrc instruction, we: 1) deliver an exception, 2) spit a nastygram on the console, 3) write back some garbage to Rt/Rt2 While 1) and 2) are perfectly acceptable, 3) is out of the scope of the architecture... Let's mimick the code in kvm_handle_cp_32 and be more cautious. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:43 +08:00
/*
* Try to emulate the coprocessor access using the target
* specific table first, and using the global table afterwards.
* If either of the tables contains a handler, handle the
* potential register operation in the case of a read and return
* with success.
*/
if (!emulate_cp(vcpu, &params, target_specific, nr_specific) ||
!emulate_cp(vcpu, &params, global, nr_global)) {
/* Split up the value between registers for the read side */
if (!params.is_write) {
vcpu_set_reg(vcpu, Rt, lower_32_bits(params.regval));
vcpu_set_reg(vcpu, Rt2, upper_32_bits(params.regval));
}
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
arm64: KVM: Do not corrupt registers on failed 64bit CP read If we fail to emulate a mrrc instruction, we: 1) deliver an exception, 2) spit a nastygram on the console, 3) write back some garbage to Rt/Rt2 While 1) and 2) are perfectly acceptable, 3) is out of the scope of the architecture... Let's mimick the code in kvm_handle_cp_32 and be more cautious. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:43 +08:00
return 1;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
}
arm64: KVM: Do not corrupt registers on failed 64bit CP read If we fail to emulate a mrrc instruction, we: 1) deliver an exception, 2) spit a nastygram on the console, 3) write back some garbage to Rt/Rt2 While 1) and 2) are perfectly acceptable, 3) is out of the scope of the architecture... Let's mimick the code in kvm_handle_cp_32 and be more cautious. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-03-28 00:03:43 +08:00
unhandled_cp_access(vcpu, &params);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
return 1;
}
/**
arm64: KVM: Fix comments of the CP handler Make sure the documentation reflects the actual name of the functions. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-13 17:16:40 +08:00
* kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
static int kvm_handle_cp_32(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *global,
size_t nr_global,
const struct sys_reg_desc *target_specific,
size_t nr_specific)
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
{
struct sys_reg_params params;
u32 hsr = kvm_vcpu_get_hsr(vcpu);
arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling the trapped system registers, completely missing the fact that the fields for Rt and Rt2 are now 5 bit wide, and not 4... Let's fix it, and provide an accessor for the most common Rt case. Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-28 02:06:48 +08:00
int Rt = kvm_vcpu_sys_get_rt(vcpu);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 18:55:17 +08:00
params.is_aarch32 = true;
params.is_32bit = true;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
params.CRm = (hsr >> 1) & 0xf;
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
params.regval = vcpu_get_reg(vcpu, Rt);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
params.is_write = ((hsr & 1) == 0);
params.CRn = (hsr >> 10) & 0xf;
params.Op0 = 0;
params.Op1 = (hsr >> 14) & 0x7;
params.Op2 = (hsr >> 17) & 0x7;
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
if (!emulate_cp(vcpu, &params, target_specific, nr_specific) ||
!emulate_cp(vcpu, &params, global, nr_global)) {
if (!params.is_write)
vcpu_set_reg(vcpu, Rt, params.regval);
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
return 1;
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
unhandled_cp_access(vcpu, &params);
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
return 1;
}
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
const struct sys_reg_desc *target_specific;
size_t num;
target_specific = get_target_table(vcpu->arch.target, false, &num);
return kvm_handle_cp_64(vcpu,
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 21:11:48 +08:00
cp15_64_regs, ARRAY_SIZE(cp15_64_regs),
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
target_specific, num);
}
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
const struct sys_reg_desc *target_specific;
size_t num;
target_specific = get_target_table(vcpu->arch.target, false, &num);
return kvm_handle_cp_32(vcpu,
cp15_regs, ARRAY_SIZE(cp15_regs),
target_specific, num);
}
int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
return kvm_handle_cp_64(vcpu,
arm64: KVM: use separate tables for AArch32 32 and 64bit traps An interesting "feature" of the CP14 encoding is that there is an overlap between 32 and 64bit registers, meaning they cannot live in the same table as we did for CP15. Create separate tables for 64bit CP14 and CP15 registers, and let the top level handler use the right one. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 21:11:48 +08:00
cp14_64_regs, ARRAY_SIZE(cp14_64_regs),
arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-04-24 17:27:13 +08:00
NULL, 0);
}
int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
return kvm_handle_cp_32(vcpu,
cp14_regs, ARRAY_SIZE(cp14_regs),
NULL, 0);
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
static int emulate_sys_reg(struct kvm_vcpu *vcpu,
arm64: KVM: Remove const from struct sys_reg_params Further rework is going to introduce a dedicated storage for transfer register value in struct sys_reg_params. Before doing this we have to remove 'const' modifiers from it in all accessor functions and their callers. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:12 +08:00
struct sys_reg_params *params)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
{
size_t num;
const struct sys_reg_desc *table, *r;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
table = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* Search target-specific then generic table. */
r = find_reg(params, table, num);
if (!r)
r = find_reg(params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
if (likely(r)) {
arm64: KVM: Treat sysreg accessors returning false as successful Instead of considering that a sysreg accessor has failed when returning false, let's consider that it is *always* successful (after all, we won't stand for an incomplete emulation). The return value now simply indicates whether we should skip the instruction (because it has now been emulated), or if we should leave the PC alone if the emulation has injected an exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:42 +08:00
perform_access(vcpu, params, r);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
} else {
kvm_err("Unsupported guest sys_reg access at: %lx\n",
*vcpu_pc(vcpu));
print_sys_reg_instr(params);
arm64: KVM: Treat sysreg accessors returning false as successful Instead of considering that a sysreg accessor has failed when returning false, let's consider that it is *always* successful (after all, we won't stand for an incomplete emulation). The return value now simply indicates whether we should skip the instruction (because it has now been emulated), or if we should leave the PC alone if the emulation has injected an exception. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-28 00:03:42 +08:00
kvm_inject_undefined(vcpu);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
return 1;
}
static void reset_sys_reg_descs(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *table, size_t num)
{
unsigned long i;
for (i = 0; i < num; i++)
if (table[i].reset)
table[i].reset(vcpu, &table[i]);
}
/**
* kvm_handle_sys_reg -- handles a mrs/msr trap on a guest sys_reg access
* @vcpu: The VCPU pointer
* @run: The kvm_run struct
*/
int kvm_handle_sys_reg(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
struct sys_reg_params params;
unsigned long esr = kvm_vcpu_get_hsr(vcpu);
arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling the trapped system registers, completely missing the fact that the fields for Rt and Rt2 are now 5 bit wide, and not 4... Let's fix it, and provide an accessor for the most common Rt case. Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-28 02:06:48 +08:00
int Rt = kvm_vcpu_sys_get_rt(vcpu);
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
int ret;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
KVM: arm64: add trace points for guest_debug debug This includes trace points for: kvm_arch_setup_guest_debug kvm_arch_clear_guest_debug I've also added some generic register setting trace events and also a trace point to dump the array of hardware registers. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:03 +08:00
trace_kvm_handle_sys_reg(esr);
arm64: KVM: allows discrimination of AArch32 sysreg access The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-01-21 18:55:17 +08:00
params.is_aarch32 = false;
params.is_32bit = false;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
params.Op0 = (esr >> 20) & 3;
params.Op1 = (esr >> 14) & 0x7;
params.CRn = (esr >> 10) & 0xf;
params.CRm = (esr >> 1) & 0xf;
params.Op2 = (esr >> 17) & 0x7;
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
params.regval = vcpu_get_reg(vcpu, Rt);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
params.is_write = !(esr & 1);
arm64: KVM: Correctly handle zero register in system register accesses System register accesses also use zero register for Rt == 31, and therefore using it will also result in getting SP value instead. This patch makes them also using new accessors, introduced by the previous patch. Since register value is no longer directly associated with storage inside vCPU context structure, we introduce a dedicated storage for it in struct sys_reg_params. This refactor also gets rid of "massive hack" in kvm_handle_cp_64(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04 20:03:13 +08:00
ret = emulate_sys_reg(vcpu, &params);
if (!params.is_write)
vcpu_set_reg(vcpu, Rt, params.regval);
return ret;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
/******************************************************************************
* Userspace API
*****************************************************************************/
static bool index_to_params(u64 id, struct sys_reg_params *params)
{
switch (id & KVM_REG_SIZE_MASK) {
case KVM_REG_SIZE_U64:
/* Any unused index bits means it's not valid. */
if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK
| KVM_REG_ARM_COPROC_MASK
| KVM_REG_ARM64_SYSREG_OP0_MASK
| KVM_REG_ARM64_SYSREG_OP1_MASK
| KVM_REG_ARM64_SYSREG_CRN_MASK
| KVM_REG_ARM64_SYSREG_CRM_MASK
| KVM_REG_ARM64_SYSREG_OP2_MASK))
return false;
params->Op0 = ((id & KVM_REG_ARM64_SYSREG_OP0_MASK)
>> KVM_REG_ARM64_SYSREG_OP0_SHIFT);
params->Op1 = ((id & KVM_REG_ARM64_SYSREG_OP1_MASK)
>> KVM_REG_ARM64_SYSREG_OP1_SHIFT);
params->CRn = ((id & KVM_REG_ARM64_SYSREG_CRN_MASK)
>> KVM_REG_ARM64_SYSREG_CRN_SHIFT);
params->CRm = ((id & KVM_REG_ARM64_SYSREG_CRM_MASK)
>> KVM_REG_ARM64_SYSREG_CRM_SHIFT);
params->Op2 = ((id & KVM_REG_ARM64_SYSREG_OP2_MASK)
>> KVM_REG_ARM64_SYSREG_OP2_SHIFT);
return true;
default:
return false;
}
}
KVM: arm/arm64: vgic: Introduce find_reg_by_id() In order to implement vGICv3 CPU interface access, we will need to perform table lookup of system registers. We would need both index_to_params() and find_reg() exported for that purpose, but instead we export a single function which combines them both. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-26 22:20:48 +08:00
const struct sys_reg_desc *find_reg_by_id(u64 id,
struct sys_reg_params *params,
const struct sys_reg_desc table[],
unsigned int num)
{
if (!index_to_params(id, params))
return NULL;
return find_reg(params, table, num);
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* Decode an index value, and find the sys_reg_desc entry. */
static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
u64 id)
{
size_t num;
const struct sys_reg_desc *table, *r;
struct sys_reg_params params;
/* We only do sys_reg for now. */
if ((id & KVM_REG_ARM_COPROC_MASK) != KVM_REG_ARM64_SYSREG)
return NULL;
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
table = get_target_table(vcpu->arch.target, true, &num);
KVM: arm/arm64: vgic: Introduce find_reg_by_id() In order to implement vGICv3 CPU interface access, we will need to perform table lookup of system registers. We would need both index_to_params() and find_reg() exported for that purpose, but instead we export a single function which combines them both. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-26 22:20:48 +08:00
r = find_reg_by_id(id, &params, table, num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
if (!r)
r = find_reg(&params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
/* Not saved in the sys_reg array and not otherwise accessible? */
if (r && !(r->reg || r->get_user))
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
r = NULL;
return r;
}
/*
* These are the invariant sys_reg registers: we let the guest see the
* host versions of these, so they're part of the guest state.
*
* A future CPU may provide a mechanism to present different values to
* the guest, or a future kvm may trap them.
*/
#define FUNCTION_INVARIANT(reg) \
static void get_##reg(struct kvm_vcpu *v, \
const struct sys_reg_desc *r) \
{ \
arm64/kvm: use {read,write}_sysreg() A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-08 20:55:37 +08:00
((struct sys_reg_desc *)r)->val = read_sysreg(reg); \
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
FUNCTION_INVARIANT(midr_el1)
FUNCTION_INVARIANT(ctr_el0)
FUNCTION_INVARIANT(revidr_el1)
FUNCTION_INVARIANT(clidr_el1)
FUNCTION_INVARIANT(aidr_el1)
/* ->val is filled in by kvm_sys_reg_table_init() */
static struct sys_reg_desc invariant_sys_regs[] = {
KVM: arm64: use common invariant sysreg definitions Now that we have common definitions for the register encodings used by KVM, make the KVM code uses thse for invariant sysreg definitions. This makes said definitions a reasonable amount shorter, especially as many comments are rendered redundant and can be removed. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu
2017-01-14 02:36:26 +08:00
{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
{ SYS_DESC(SYS_CLIDR_EL1), NULL, get_clidr_el1 },
{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
};
ARM64: KVM: set and get of sys registers in BE case Since size of all sys registers is always 8 bytes. Current code is actually endian agnostic. Just clean it up a bit. Removed comment about little endian. Change type of pointer from 'void *' to 'u64 *' to enforce stronger type checking. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-06-13 00:30:12 +08:00
static int reg_from_user(u64 *val, const void __user *uaddr, u64 id)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
{
if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0)
return -EFAULT;
return 0;
}
ARM64: KVM: set and get of sys registers in BE case Since size of all sys registers is always 8 bytes. Current code is actually endian agnostic. Just clean it up a bit. Removed comment about little endian. Change type of pointer from 'void *' to 'u64 *' to enforce stronger type checking. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-06-13 00:30:12 +08:00
static int reg_to_user(void __user *uaddr, const u64 *val, u64 id)
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
{
if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0)
return -EFAULT;
return 0;
}
static int get_invariant_sys_reg(u64 id, void __user *uaddr)
{
struct sys_reg_params params;
const struct sys_reg_desc *r;
KVM: arm/arm64: vgic: Introduce find_reg_by_id() In order to implement vGICv3 CPU interface access, we will need to perform table lookup of system registers. We would need both index_to_params() and find_reg() exported for that purpose, but instead we export a single function which combines them both. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-26 22:20:48 +08:00
r = find_reg_by_id(id, &params, invariant_sys_regs,
ARRAY_SIZE(invariant_sys_regs));
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
if (!r)
return -ENOENT;
return reg_to_user(uaddr, &r->val, id);
}
static int set_invariant_sys_reg(u64 id, void __user *uaddr)
{
struct sys_reg_params params;
const struct sys_reg_desc *r;
int err;
u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */
KVM: arm/arm64: vgic: Introduce find_reg_by_id() In order to implement vGICv3 CPU interface access, we will need to perform table lookup of system registers. We would need both index_to_params() and find_reg() exported for that purpose, but instead we export a single function which combines them both. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-26 22:20:48 +08:00
r = find_reg_by_id(id, &params, invariant_sys_regs,
ARRAY_SIZE(invariant_sys_regs));
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
if (!r)
return -ENOENT;
err = reg_from_user(&val, uaddr, id);
if (err)
return err;
/* This is what we mean by invariant: you can't change it. */
if (r->val != val)
return -EINVAL;
return 0;
}
static bool is_valid_cache(u32 val)
{
u32 level, ctype;
if (val >= CSSELR_MAX)
KVM: ARM/arm64: avoid returning negative error code as bool is_valid_cache returns true if the specified cache is valid. Unfortunately, if the parameter passed it out of range, we return -ENOENT, which ends up as true leading to potential hilarity. This patch returns false on the failure path instead. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-08-26 22:13:22 +08:00
return false;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* Bottom bit is Instruction or Data bit. Next 3 bits are level. */
level = (val >> 1);
ctype = (cache_levels >> (level * 3)) & 7;
switch (ctype) {
case 0: /* No cache */
return false;
case 1: /* Instruction cache only */
return (val & 1);
case 2: /* Data cache only */
case 4: /* Unified cache */
return !(val & 1);
case 3: /* Separate instruction and data caches */
return true;
default: /* Reserved: we can't know instruction or data. */
return false;
}
}
static int demux_c15_get(u64 id, void __user *uaddr)
{
u32 val;
u32 __user *uval = uaddr;
/* Fail if we have unknown bits set. */
if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
| ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
return -ENOENT;
switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
case KVM_REG_ARM_DEMUX_ID_CCSIDR:
if (KVM_REG_SIZE(id) != 4)
return -ENOENT;
val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
if (!is_valid_cache(val))
return -ENOENT;
return put_user(get_ccsidr(val), uval);
default:
return -ENOENT;
}
}
static int demux_c15_set(u64 id, void __user *uaddr)
{
u32 val, newval;
u32 __user *uval = uaddr;
/* Fail if we have unknown bits set. */
if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
| ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
return -ENOENT;
switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
case KVM_REG_ARM_DEMUX_ID_CCSIDR:
if (KVM_REG_SIZE(id) != 4)
return -ENOENT;
val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
if (!is_valid_cache(val))
return -ENOENT;
if (get_user(newval, uval))
return -EFAULT;
/* This is also invariant: you can't change it. */
if (newval != get_ccsidr(val))
return -EINVAL;
return 0;
default:
return -ENOENT;
}
}
int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
{
const struct sys_reg_desc *r;
void __user *uaddr = (void __user *)(unsigned long)reg->addr;
if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
return demux_c15_get(reg->id, uaddr);
if (KVM_REG_SIZE(reg->id) != sizeof(__u64))
return -ENOENT;
r = index_to_sys_reg_desc(vcpu, reg->id);
if (!r)
return get_invariant_sys_reg(reg->id, uaddr);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
if (r->get_user)
return (r->get_user)(vcpu, r, reg, uaddr);
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
return reg_to_user(uaddr, &__vcpu_sys_reg(vcpu, r->reg), reg->id);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
{
const struct sys_reg_desc *r;
void __user *uaddr = (void __user *)(unsigned long)reg->addr;
if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
return demux_c15_set(reg->id, uaddr);
if (KVM_REG_SIZE(reg->id) != sizeof(__u64))
return -ENOENT;
r = index_to_sys_reg_desc(vcpu, reg->id);
if (!r)
return set_invariant_sys_reg(reg->id, uaddr);
KVM: arm64: introduce vcpu->arch.debug_ptr This introduces a level of indirection for the debug registers. Instead of using the sys_regs[] directly we store registers in a structure in the vcpu. The new kvm_arm_reset_debug_ptr() sets the debug ptr to the guest context. Because we no longer give the sys_regs offset for the sys_reg_desc->reg field, but instead the index into a debug-specific struct we need to add a number of additional trap functions for each register. Also as the generic generic user-space access code no longer works we have introduced a new pair of function pointers to the sys_reg_desc structure to override the generic code when needed. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-08 00:30:00 +08:00
if (r->set_user)
return (r->set_user)(vcpu, r, reg, uaddr);
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
return reg_from_user(&__vcpu_sys_reg(vcpu, r->reg), uaddr, reg->id);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}
static unsigned int num_demux_regs(void)
{
unsigned int i, count = 0;
for (i = 0; i < CSSELR_MAX; i++)
if (is_valid_cache(i))
count++;
return count;
}
static int write_demux_regids(u64 __user *uindices)
{
arm64: KVM: export demux regids as KVM_REG_ARM64 I suspect this is a -ECUTPASTE fault from the initial implementation. If we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues. The kvm/api.txt document describes all arm64 registers as starting with 0x60xx... (i.e KVM_REG_ARM64). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-01 23:53:13 +08:00
u64 val = KVM_REG_ARM64 | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
unsigned int i;
val |= KVM_REG_ARM_DEMUX_ID_CCSIDR;
for (i = 0; i < CSSELR_MAX; i++) {
if (!is_valid_cache(i))
continue;
if (put_user(val | i, uindices))
return -EFAULT;
uindices++;
}
return 0;
}
static u64 sys_reg_to_index(const struct sys_reg_desc *reg)
{
return (KVM_REG_ARM64 | KVM_REG_SIZE_U64 |
KVM_REG_ARM64_SYSREG |
(reg->Op0 << KVM_REG_ARM64_SYSREG_OP0_SHIFT) |
(reg->Op1 << KVM_REG_ARM64_SYSREG_OP1_SHIFT) |
(reg->CRn << KVM_REG_ARM64_SYSREG_CRN_SHIFT) |
(reg->CRm << KVM_REG_ARM64_SYSREG_CRM_SHIFT) |
(reg->Op2 << KVM_REG_ARM64_SYSREG_OP2_SHIFT));
}
static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
{
if (!*uind)
return true;
if (put_user(sys_reg_to_index(reg), *uind))
return false;
(*uind)++;
return true;
}
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
static int walk_one_sys_reg(const struct sys_reg_desc *rd,
u64 __user **uind,
unsigned int *total)
{
/*
* Ignore registers we trap but don't save,
* and for which no custom user accessor is provided.
*/
if (!(rd->reg || rd->get_user))
return 0;
if (!copy_reg_to_user(rd, uind))
return -EFAULT;
(*total)++;
return 0;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* Assumed ordered tables, see kvm_sys_reg_table_init. */
static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
{
const struct sys_reg_desc *i1, *i2, *end1, *end2;
unsigned int total = 0;
size_t num;
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
int err;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* We check for duplicates here, to allow arch-specific overrides. */
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
i1 = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
end1 = i1 + num;
i2 = sys_reg_descs;
end2 = sys_reg_descs + ARRAY_SIZE(sys_reg_descs);
BUG_ON(i1 == end1 || i2 == end2);
/* Walk carefully, as both tables may refer to the same register. */
while (i1 || i2) {
int cmp = cmp_sys_reg(i1, i2);
/* target-specific overrides generic entry. */
arm64: KVM: Hide unsupported AArch64 CPU features from guests Currently, a guest kernel sees the true CPU feature registers (ID_*_EL1) when it reads them using MRS instructions. This means that the guest may observe features that are present in the hardware but the host doesn't understand or doesn't provide support for. A guest may legimitately try to use such a feature as per the architecture, but use of the feature may trap instead of working normally, triggering undef injection into the guest. This is not a problem for the host, but the guest may go wrong when running on newer hardware than the host knows about. This patch hides from guest VMs any AArch64-specific CPU features that the host doesn't support, by exposing to the guest the sanitised versions of the registers computed by the cpufeatures framework, instead of the true hardware registers. To achieve this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation code is added to KVM to report the sanitised versions of the affected registers in response to MRS and register reads from userspace. The affected registers are removed from invariant_sys_regs[] (since the invariant_sys_regs handling is no longer quite correct for them) and added to sys_reg_desgs[], with appropriate access(), get_user() and set_user() methods. No runtime vcpu storage is allocated for the registers: instead, they are read on demand from the cpufeatures framework. This may need modification in the future if there is a need for userspace to customise the features visible to the guest. Attempts by userspace to write the registers are handled similarly to the current invariant_sys_regs handling: writes are permitted, but only if they don't attempt to change the value. This is sufficient to support VM snapshot/restore from userspace. Because of the additional registers, restoring a VM on an older kernel may not work unless userspace knows how to handle the extra VM registers exposed to the KVM user ABI by this patch. Under the principle of least damage, this patch makes no attempt to handle any of the other registers currently in invariant_sys_regs[], or to emulate registers for AArch32: however, these could be handled in a similar way in future, as necessary. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-31 23:50:56 +08:00
if (cmp <= 0)
err = walk_one_sys_reg(i1, &uind, &total);
else
err = walk_one_sys_reg(i2, &uind, &total);
if (err)
return err;
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
if (cmp <= 0 && ++i1 == end1)
i1 = NULL;
if (cmp >= 0 && ++i2 == end2)
i2 = NULL;
}
return total;
}
unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu)
{
return ARRAY_SIZE(invariant_sys_regs)
+ num_demux_regs()
+ walk_sys_regs(vcpu, (u64 __user *)NULL);
}
int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
{
unsigned int i;
int err;
/* Then give them all the invariant registers' indices. */
for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) {
if (put_user(sys_reg_to_index(&invariant_sys_regs[i]), uindices))
return -EFAULT;
uindices++;
}
err = walk_sys_regs(vcpu, uindices);
if (err < 0)
return err;
uindices += err;
return write_demux_regids(uindices);
}
arm64: KVM: check ordering of all system register tables We now have multiple tables for the various system registers we trap. Make sure we check the order of all of them, as it is critical that we get the order right (been there, done that...). Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-05-07 20:43:39 +08:00
static int check_sysreg_table(const struct sys_reg_desc *table, unsigned int n)
{
unsigned int i;
for (i = 1; i < n; i++) {
if (cmp_sys_reg(&table[i-1], &table[i]) >= 0) {
kvm_err("sys_reg table %p out of order (%d)\n", table, i - 1);
return 1;
}
}
return 0;
}
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
void kvm_sys_reg_table_init(void)
{
unsigned int i;
struct sys_reg_desc clidr;
/* Make sure tables are unique and in order. */
arm64: KVM: check ordering of all system register tables We now have multiple tables for the various system registers we trap. Make sure we check the order of all of them, as it is critical that we get the order right (been there, done that...). Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-05-07 20:43:39 +08:00
BUG_ON(check_sysreg_table(sys_reg_descs, ARRAY_SIZE(sys_reg_descs)));
BUG_ON(check_sysreg_table(cp14_regs, ARRAY_SIZE(cp14_regs)));
BUG_ON(check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs)));
BUG_ON(check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs)));
BUG_ON(check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs)));
BUG_ON(check_sysreg_table(invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs)));
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
/* We abuse the reset function to overwrite the table itself. */
for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++)
invariant_sys_regs[i].reset(NULL, &invariant_sys_regs[i]);
/*
* CLIDR format is awkward, so clean it up. See ARM B4.1.20:
*
* If software reads the Cache Type fields from Ctype1
* upwards, once it has seen a value of 0b000, no caches
* exist at further-out levels of the hierarchy. So, for
* example, if Ctype3 is the first Cache Type field with a
* value of 0b000, the values of Ctype4 to Ctype7 must be
* ignored.
*/
get_clidr_el1(NULL, &clidr); /* Ugly... */
cache_levels = clidr.val;
for (i = 0; i < 7; i++)
if (((cache_levels >> (i*3)) & 7) == 0)
break;
/* Clear all higher bits. */
cache_levels &= (1 << (i*3))-1;
}
/**
* kvm_reset_sys_regs - sets system registers to reset value
* @vcpu: The VCPU pointer
*
* This function finds the right table above and sets the registers on the
* virtual CPU struct to their architecturally defined reset values.
*/
void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
{
size_t num;
const struct sys_reg_desc *table;
/* Catch someone adding a register without putting in reset entry. */
memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs));
/* Generic chip reset first (so target could override). */
reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
arm64: KVM: 32bit handling of coprocessor traps Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-07 18:32:33 +08:00
table = get_target_table(vcpu->arch.target, true, &num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
reset_sys_reg_descs(vcpu, table, num);
for (num = 1; num < NR_SYS_REGS; num++)
KVM: arm64: Rewrite system register accessors to read/write functions Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-16 22:38:53 +08:00
if (__vcpu_sys_reg(vcpu, num) == 0x4242424242424242)
panic("Didn't reset __vcpu_sys_reg(%zi)", num);
arm64: KVM: system register handling Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-12-11 00:15:34 +08:00
}