OpenCloudOS-Kernel/drivers/edac/edac_mc.c

1223 lines
29 KiB
C
Raw Normal View History

/*
* edac_mc kernel module
* (C) 2005, 2006 Linux Networx (http://lnxi.com)
* This file may be distributed under the terms of the
* GNU General Public License.
*
* Written by Thayne Harbaugh
* Based on work by Dan Hollis <goemon at anime dot net> and others.
* http://www.anime.net/~goemon/linux-ecc/
*
* Modified by Dave Peterson and Doug Thompson
*
*/
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/highmem.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/ctype.h>
#include <linux/edac.h>
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <asm/page.h>
#include "edac_mc.h"
#include "edac_module.h"
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
#include <ras/ras_event.h>
EDAC: Cleanup atomic_scrub mess So first of all, this atomic_scrub() function's naming is bad. It looks like an atomic_t helper. Change it to edac_atomic_scrub(). The bigger problem is that this function is arch-specific and every new arch which doesn't necessarily need that functionality still needs to define it, otherwise EDAC doesn't compile. So instead of doing that and including arch-specific headers, have each arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c for ifdeffery. Much cleaner. And we already are doing this with another symbol - EDAC_SUPPORT. This is also much cleaner than having CONFIG_EDAC enumerate all the arches which need/have EDAC support and drivers. This way I can kill the useless edac.h header in tile too. Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Cc: "Maciej W. Rozycki" <macro@codesourcery.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: x86@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2015-05-22 01:59:31 +08:00
#ifdef CONFIG_EDAC_ATOMIC_SCRUB
#include <asm/edac.h>
#else
#define edac_atomic_scrub(va, size) do { } while (0)
#endif
int edac_op_state = EDAC_OPSTATE_INVAL;
EXPORT_SYMBOL_GPL(edac_op_state);
static int edac_report = EDAC_REPORTING_ENABLED;
/* lock to memory controller's control array */
static DEFINE_MUTEX(mem_ctls_mutex);
static LIST_HEAD(mc_devices);
/*
* Used to lock EDAC MC to just one module, avoiding two drivers e. g.
* apei/ghes and i7core_edac to be used at the same time.
*/
static const char *edac_mc_owner;
static struct mem_ctl_info *error_desc_to_mci(struct edac_raw_error_desc *e)
{
return container_of(e, struct mem_ctl_info, error_desc);
}
int edac_get_report_status(void)
{
return edac_report;
}
EXPORT_SYMBOL_GPL(edac_get_report_status);
void edac_set_report_status(int new)
{
if (new == EDAC_REPORTING_ENABLED ||
new == EDAC_REPORTING_DISABLED ||
new == EDAC_REPORTING_FORCE)
edac_report = new;
}
EXPORT_SYMBOL_GPL(edac_set_report_status);
static int edac_report_set(const char *str, const struct kernel_param *kp)
{
if (!str)
return -EINVAL;
if (!strncmp(str, "on", 2))
edac_report = EDAC_REPORTING_ENABLED;
else if (!strncmp(str, "off", 3))
edac_report = EDAC_REPORTING_DISABLED;
else if (!strncmp(str, "force", 5))
edac_report = EDAC_REPORTING_FORCE;
return 0;
}
static int edac_report_get(char *buffer, const struct kernel_param *kp)
{
int ret = 0;
switch (edac_report) {
case EDAC_REPORTING_ENABLED:
ret = sprintf(buffer, "on");
break;
case EDAC_REPORTING_DISABLED:
ret = sprintf(buffer, "off");
break;
case EDAC_REPORTING_FORCE:
ret = sprintf(buffer, "force");
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static const struct kernel_param_ops edac_report_ops = {
.set = edac_report_set,
.get = edac_report_get,
};
module_param_cb(edac_report, &edac_report_ops, &edac_report, 0644);
unsigned int edac_dimm_info_location(struct dimm_info *dimm, char *buf,
unsigned int len)
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
{
struct mem_ctl_info *mci = dimm->mci;
int i, n, count = 0;
char *p = buf;
for (i = 0; i < mci->n_layers; i++) {
n = snprintf(p, len, "%s %d ",
edac_layer_name[mci->layers[i].type],
dimm->location[i]);
p += n;
len -= n;
count += n;
if (!len)
break;
}
return count;
}
#ifdef CONFIG_EDAC_DEBUG
edac: rename channel_info to rank_info What it is pointed by a csrow/channel vector is a rank information, and not a channel information. On a traditional architecture, the memory controller directly access the memory ranks, via chip select rows. Different ranks at the same DIMM is selected via different chip select rows. So, typically, one csrow/channel pair means one different DIMM. On FB-DIMMs, there's a microcontroller chip at the DIMM, called Advanced Memory Buffer (AMB) that serves as the interface between the memory controller and the memory chips. The AMB selection is via the DIMM slot, and not via a csrow. It is up to the AMB to talk with the csrows of the DRAM chips. So, the FB-DIMM memory controllers see the DIMM slot, and not the DIMM rank. RAMBUS is similar. Newer memory controllers, like the ones found on Intel Sandy Bridge and Nehalem, even working with normal DDR3 DIMM's, don't use the usual channel A/channel B interleaving schema to provide 128 bits data access. Instead, they have more channels (3 or 4 channels), and they can use several interleaving schemas. Such memory controllers see the DIMMs directly on their registers, instead of the ranks, which is better for the driver, as its main usageis to point to a broken DIMM stick (the Field Repleceable Unit), and not to point to a broken DRAM chip. The drivers that support such such newer memory architecture models currently need to fake information and to abuse on EDAC structures, as the subsystem was conceived with the idea that the csrow would always be visible by the CPU. To make things a little worse, those drivers don't currently fake csrows/channels on a consistent way, as the concepts there don't apply to the memory controllers they're talking with. So, each driver author interpreted the concepts using a different logic. In order to fix it, let's rename the data structure that points into a DIMM rank to "rank_info", in order to be clearer about what's stored there. Latter patches will provide a better way to represent the memory hierarchy for the other types of memory controller. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:26:13 +08:00
static void edac_mc_dump_channel(struct rank_info *chan)
{
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
edac_dbg(4, " channel->chan_idx = %d\n", chan->chan_idx);
edac_dbg(4, " channel = %p\n", chan);
edac_dbg(4, " channel->csrow = %p\n", chan->csrow);
edac_dbg(4, " channel->dimm = %p\n", chan->dimm);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
static void edac_mc_dump_dimm(struct dimm_info *dimm)
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
{
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
char location[80];
if (!dimm->nr_pages)
return;
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
edac_dimm_info_location(dimm, location, sizeof(location));
edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n",
dimm->mci->csbased ? "rank" : "dimm",
dimm->idx, location, dimm->csrow, dimm->cschannel);
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
edac_dbg(4, " dimm = %p\n", dimm);
edac_dbg(4, " dimm->label = '%s'\n", dimm->label);
edac_dbg(4, " dimm->nr_pages = 0x%x\n", dimm->nr_pages);
edac_dbg(4, " dimm->grain = %d\n", dimm->grain);
edac_dbg(4, " dimm->nr_pages = 0x%x\n", dimm->nr_pages);
}
static void edac_mc_dump_csrow(struct csrow_info *csrow)
{
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
edac_dbg(4, "csrow->csrow_idx = %d\n", csrow->csrow_idx);
edac_dbg(4, " csrow = %p\n", csrow);
edac_dbg(4, " csrow->first_page = 0x%lx\n", csrow->first_page);
edac_dbg(4, " csrow->last_page = 0x%lx\n", csrow->last_page);
edac_dbg(4, " csrow->page_mask = 0x%lx\n", csrow->page_mask);
edac_dbg(4, " csrow->nr_channels = %d\n", csrow->nr_channels);
edac_dbg(4, " csrow->channels = %p\n", csrow->channels);
edac_dbg(4, " csrow->mci = %p\n", csrow->mci);
}
static void edac_mc_dump_mci(struct mem_ctl_info *mci)
{
edac_dbg(3, "\tmci = %p\n", mci);
edac_dbg(3, "\tmci->mtype_cap = %lx\n", mci->mtype_cap);
edac_dbg(3, "\tmci->edac_ctl_cap = %lx\n", mci->edac_ctl_cap);
edac_dbg(3, "\tmci->edac_cap = %lx\n", mci->edac_cap);
edac_dbg(4, "\tmci->edac_check = %p\n", mci->edac_check);
edac_dbg(3, "\tmci->nr_csrows = %d, csrows = %p\n",
mci->nr_csrows, mci->csrows);
edac_dbg(3, "\tmci->nr_dimms = %d, dimms = %p\n",
mci->tot_dimms, mci->dimms);
edac_dbg(3, "\tdev = %p\n", mci->pdev);
edac_dbg(3, "\tmod_name:ctl_name = %s:%s\n",
mci->mod_name, mci->ctl_name);
edac_dbg(3, "\tpvt_info = %p\n\n", mci->pvt_info);
}
#endif /* CONFIG_EDAC_DEBUG */
const char * const edac_mem_types[] = {
[MEM_EMPTY] = "Empty",
[MEM_RESERVED] = "Reserved",
[MEM_UNKNOWN] = "Unknown",
[MEM_FPM] = "FPM",
[MEM_EDO] = "EDO",
[MEM_BEDO] = "BEDO",
[MEM_SDR] = "Unbuffered-SDR",
[MEM_RDR] = "Registered-SDR",
[MEM_DDR] = "Unbuffered-DDR",
[MEM_RDDR] = "Registered-DDR",
[MEM_RMBS] = "RMBS",
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
[MEM_XDR] = "XDR",
[MEM_DDR3] = "Unbuffered-DDR3",
[MEM_RDDR3] = "Registered-DDR3",
[MEM_LRDDR3] = "Load-Reduced-DDR3-RAM",
[MEM_DDR4] = "Unbuffered-DDR4",
[MEM_RDDR4] = "Registered-DDR4",
[MEM_LRDDR4] = "Load-Reduced-DDR4-RAM",
[MEM_NVDIMM] = "Non-volatile-RAM",
};
EXPORT_SYMBOL_GPL(edac_mem_types);
/**
* edac_align_ptr - Prepares the pointer offsets for a single-shot allocation
* @p: pointer to a pointer with the memory offset to be used. At
* return, this will be incremented to point to the next offset
* @size: Size of the data structure to be reserved
* @n_elems: Number of elements that should be reserved
*
* If 'size' is a constant, the compiler will optimize this whole function
* down to either a no-op or the addition of a constant to the value of '*p'.
*
* The 'p' pointer is absolutely needed to keep the proper advancing
* further in memory to the proper offsets when allocating the struct along
* with its embedded structs, as edac_device_alloc_ctl_info() does it
* above, for example.
*
* At return, the pointer 'p' will be incremented to be used on a next call
* to this function.
*/
void *edac_align_ptr(void **p, unsigned int size, int n_elems)
{
unsigned int align, r;
void *ptr = *p;
*p += size * n_elems;
/*
* 'p' can possibly be an unaligned item X such that sizeof(X) is
* 'size'. Adjust 'p' so that its alignment is at least as
* stringent as what the compiler would provide for X and return
* the aligned result.
* Here we assume that the alignment of a "long long" is the most
* stringent alignment that the compiler will ever provide by default.
* As far as I know, this is a reasonable assumption.
*/
if (size > sizeof(long))
align = sizeof(long long);
else if (size > sizeof(int))
align = sizeof(long);
else if (size > sizeof(short))
align = sizeof(int);
else if (size > sizeof(char))
align = sizeof(short);
else
return (char *)ptr;
r = (unsigned long)p % align;
if (r == 0)
return (char *)ptr;
*p += align - r;
return (void *)(((unsigned long)ptr) + align - r);
}
static void _edac_mc_free(struct mem_ctl_info *mci)
{
EDAC/mc: Change mci device removal to use put_device() There are dimm and csrow devices linked to the mci device esp. to show up in sysfs. It must be granted that children devices are removed before its mci parent. Thus, the release functions must be called in the correct order and may not miss any child before releasing its parent. In the current implementation this is only granted by the correct order of release functions. A much better approach is to use put_device() that releases the device only after all users are gone. It is the recommended way to release a device and free its memory. The function uses the device's refcount and only frees it if there are no users of it anymore such as children. So implement a mci_release() function to remove mci devices, use put_device() to free them and early initialize the mci device right after its struct has been allocated. Change the release function so that it can be universally used no matter if the device is registered or not. Since subsequent dimm and csrow sysfs links are implemented as children devices, their refcounts will keep the parent mci device from being removed as long as sysfs entries exist and until all users have been unregistered in edac_remove_sysfs_mci_device(). Remove edac_unregister_sysfs() and merge mci sysfs removal into edac_remove_sysfs_mci_device(). There is only a single instance now that removes the sysfs entries. The function can now be used in the error paths for cleanup. Also, create device release functions for all involved devices (dev->release), remove device_type release functions (dev_type-> release) and also use dev->init_name instead of dev_set_name(). [ bp: Massage commit message and comments. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Aristeu Rozanski <aris@redhat.com> Link: https://lkml.kernel.org/r/20200212120340.4764-5-rrichter@marvell.com
2020-02-12 20:03:40 +08:00
put_device(&mci->dev);
}
static void mci_release(struct device *dev)
{
struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
struct csrow_info *csr;
int i, chn, row;
if (mci->dimms) {
for (i = 0; i < mci->tot_dimms; i++)
kfree(mci->dimms[i]);
kfree(mci->dimms);
}
if (mci->csrows) {
for (row = 0; row < mci->nr_csrows; row++) {
csr = mci->csrows[row];
if (!csr)
continue;
if (csr->channels) {
for (chn = 0; chn < mci->num_cschannel; chn++)
kfree(csr->channels[chn]);
kfree(csr->channels);
}
kfree(csr);
}
kfree(mci->csrows);
}
kfree(mci);
}
static int edac_mc_alloc_csrows(struct mem_ctl_info *mci)
{
unsigned int tot_channels = mci->num_cschannel;
unsigned int tot_csrows = mci->nr_csrows;
unsigned int row, chn;
edac: Create a dimm struct and move the labels into it The way a DIMM is currently represented implies that they're linked into a per-csrow struct. However, some drivers don't see csrows, as they're ridden behind some chip like the AMB's on FBDIMM's, for example. This forced drivers to fake^Wvirtualize a csrow struct, and to create a mess under csrow/channel original's concept. Move the DIMM labels into a per-DIMM struct, and add there the real location of the socket, in terms of csrow/channel. Latter patches will modify the location to properly represent the memory architecture. All other drivers will use a per-csrow type of location. Some of those drivers will require a latter conversion, as they also fake the csrows internally. TODO: While this patch doesn't change the existing behavior, on csrows-based memory controllers, a csrow/channel pair points to a memory rank. There's a known bug at the EDAC core that allows having different labels for the same DIMM, if it has more than one rank. A latter patch is need to merge the several ranks for a DIMM into the same dimm_info struct, in order to avoid having different labels for the same DIMM. The edac_mc_alloc() will now contain a per-dimm initialization loop that will be changed by latter patches in order to match other types of memory architectures. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-28 01:12:32 +08:00
/*
* Alocate and fill the csrow/channels structs
edac: Create a dimm struct and move the labels into it The way a DIMM is currently represented implies that they're linked into a per-csrow struct. However, some drivers don't see csrows, as they're ridden behind some chip like the AMB's on FBDIMM's, for example. This forced drivers to fake^Wvirtualize a csrow struct, and to create a mess under csrow/channel original's concept. Move the DIMM labels into a per-DIMM struct, and add there the real location of the socket, in terms of csrow/channel. Latter patches will modify the location to properly represent the memory architecture. All other drivers will use a per-csrow type of location. Some of those drivers will require a latter conversion, as they also fake the csrows internally. TODO: While this patch doesn't change the existing behavior, on csrows-based memory controllers, a csrow/channel pair points to a memory rank. There's a known bug at the EDAC core that allows having different labels for the same DIMM, if it has more than one rank. A latter patch is need to merge the several ranks for a DIMM into the same dimm_info struct, in order to avoid having different labels for the same DIMM. The edac_mc_alloc() will now contain a per-dimm initialization loop that will be changed by latter patches in order to match other types of memory architectures. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-28 01:12:32 +08:00
*/
mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL);
if (!mci->csrows)
return -ENOMEM;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
for (row = 0; row < tot_csrows; row++) {
struct csrow_info *csr;
csr = kzalloc(sizeof(**mci->csrows), GFP_KERNEL);
if (!csr)
return -ENOMEM;
mci->csrows[row] = csr;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
csr->csrow_idx = row;
csr->mci = mci;
csr->nr_channels = tot_channels;
csr->channels = kcalloc(tot_channels, sizeof(*csr->channels),
GFP_KERNEL);
if (!csr->channels)
return -ENOMEM;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
for (chn = 0; chn < tot_channels; chn++) {
struct rank_info *chan;
chan = kzalloc(sizeof(**csr->channels), GFP_KERNEL);
if (!chan)
return -ENOMEM;
csr->channels[chn] = chan;
chan->chan_idx = chn;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
chan->csrow = csr;
}
}
return 0;
}
static int edac_mc_alloc_dimms(struct mem_ctl_info *mci)
{
unsigned int pos[EDAC_MAX_LAYERS];
unsigned int row, chn, idx;
int layer;
void *p;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/*
* Allocate and fill the dimm structs
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
*/
mci->dimms = kcalloc(mci->tot_dimms, sizeof(*mci->dimms), GFP_KERNEL);
if (!mci->dimms)
return -ENOMEM;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
memset(&pos, 0, sizeof(pos));
row = 0;
chn = 0;
for (idx = 0; idx < mci->tot_dimms; idx++) {
struct dimm_info *dimm;
struct rank_info *chan;
int n, len;
chan = mci->csrows[row]->channels[chn];
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
dimm = kzalloc(sizeof(**mci->dimms), GFP_KERNEL);
if (!dimm)
return -ENOMEM;
mci->dimms[idx] = dimm;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
dimm->mci = mci;
dimm->idx = idx;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 22:05:20 +08:00
/*
* Copy DIMM location and initialize it.
*/
len = sizeof(dimm->label);
p = dimm->label;
n = snprintf(p, len, "mc#%u", mci->mc_idx);
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 22:05:20 +08:00
p += n;
len -= n;
for (layer = 0; layer < mci->n_layers; layer++) {
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 22:05:20 +08:00
n = snprintf(p, len, "%s#%u",
edac_layer_name[mci->layers[layer].type],
pos[layer]);
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 22:05:20 +08:00
p += n;
len -= n;
dimm->location[layer] = pos[layer];
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
edac: Initialize the dimm label with the known information While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-09 22:05:20 +08:00
if (len <= 0)
break;
}
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/* Link it to the csrows old API data */
chan->dimm = dimm;
dimm->csrow = row;
dimm->cschannel = chn;
/* Increment csrow location */
if (mci->layers[0].is_virt_csrow) {
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
chn++;
if (chn == mci->num_cschannel) {
edac: Fix the dimm filling for csrows-based layouts The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-24 20:30:01 +08:00
chn = 0;
row++;
}
} else {
row++;
if (row == mci->nr_csrows) {
edac: Fix the dimm filling for csrows-based layouts The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-24 20:30:01 +08:00
row = 0;
chn++;
}
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
edac: Create a dimm struct and move the labels into it The way a DIMM is currently represented implies that they're linked into a per-csrow struct. However, some drivers don't see csrows, as they're ridden behind some chip like the AMB's on FBDIMM's, for example. This forced drivers to fake^Wvirtualize a csrow struct, and to create a mess under csrow/channel original's concept. Move the DIMM labels into a per-DIMM struct, and add there the real location of the socket, in terms of csrow/channel. Latter patches will modify the location to properly represent the memory architecture. All other drivers will use a per-csrow type of location. Some of those drivers will require a latter conversion, as they also fake the csrows internally. TODO: While this patch doesn't change the existing behavior, on csrows-based memory controllers, a csrow/channel pair points to a memory rank. There's a known bug at the EDAC core that allows having different labels for the same DIMM, if it has more than one rank. A latter patch is need to merge the several ranks for a DIMM into the same dimm_info struct, in order to avoid having different labels for the same DIMM. The edac_mc_alloc() will now contain a per-dimm initialization loop that will be changed by latter patches in order to match other types of memory architectures. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-28 01:12:32 +08:00
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/* Increment dimm location */
for (layer = mci->n_layers - 1; layer >= 0; layer--) {
pos[layer]++;
if (pos[layer] < mci->layers[layer].size)
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
break;
pos[layer] = 0;
}
}
return 0;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
struct mem_ctl_info *edac_mc_alloc(unsigned int mc_num,
unsigned int n_layers,
struct edac_mc_layer *layers,
unsigned int sz_pvt)
{
struct mem_ctl_info *mci;
struct edac_mc_layer *layer;
unsigned int idx, size, tot_dimms = 1;
unsigned int tot_csrows = 1, tot_channels = 1;
void *pvt, *ptr = NULL;
bool per_rank = false;
if (WARN_ON(n_layers > EDAC_MAX_LAYERS || n_layers == 0))
return NULL;
/*
* Calculate the total amount of dimms and csrows/cschannels while
* in the old API emulation mode
*/
for (idx = 0; idx < n_layers; idx++) {
tot_dimms *= layers[idx].size;
if (layers[idx].is_virt_csrow)
tot_csrows *= layers[idx].size;
else
tot_channels *= layers[idx].size;
if (layers[idx].type == EDAC_MC_LAYER_CHIP_SELECT)
per_rank = true;
}
/* Figure out the offsets of the various items from the start of an mc
* structure. We want the alignment of each item to be at least as
* stringent as what the compiler would provide if we could simply
* hardcode everything into a single struct.
*/
mci = edac_align_ptr(&ptr, sizeof(*mci), 1);
layer = edac_align_ptr(&ptr, sizeof(*layer), n_layers);
pvt = edac_align_ptr(&ptr, sz_pvt, 1);
size = ((unsigned long)pvt) + sz_pvt;
edac_dbg(1, "allocating %u bytes for mci data (%d %s, %d csrows/channels)\n",
size,
tot_dimms,
per_rank ? "ranks" : "dimms",
tot_csrows * tot_channels);
mci = kzalloc(size, GFP_KERNEL);
if (mci == NULL)
return NULL;
mci->dev.release = mci_release;
device_initialize(&mci->dev);
/* Adjust pointers so they point within the memory we just allocated
* rather than an imaginary chunk of memory located at address 0.
*/
layer = (struct edac_mc_layer *)(((char *)mci) + ((unsigned long)layer));
pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL;
/* setup index and various internal pointers */
mci->mc_idx = mc_num;
mci->tot_dimms = tot_dimms;
mci->pvt_info = pvt;
mci->n_layers = n_layers;
mci->layers = layer;
memcpy(mci->layers, layers, sizeof(*layer) * n_layers);
mci->nr_csrows = tot_csrows;
mci->num_cschannel = tot_channels;
mci->csbased = per_rank;
if (edac_mc_alloc_csrows(mci))
goto error;
if (edac_mc_alloc_dimms(mci))
goto error;
mci->op_state = OP_ALLOC;
return mci;
error:
_edac_mc_free(mci);
return NULL;
}
EXPORT_SYMBOL_GPL(edac_mc_alloc);
void edac_mc_free(struct mem_ctl_info *mci)
{
edac_dbg(1, "\n");
EDAC/mc: Fix use-after-free and memleaks during device removal A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK set, revealed several issues when removing an mci device: 1) Use-after-free: On 27.11.19 17:07:33, John Garry wrote: > [ 22.104498] BUG: KASAN: use-after-free in > edac_remove_sysfs_mci_device+0x148/0x180 The use-after-free is caused by the mci_for_each_dimm() macro called in edac_remove_sysfs_mci_device(). The iterator was introduced with c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator"). The iterator loop calls device_unregister(&dimm->dev), which removes the sysfs entry of the device, but also frees the dimm struct in dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(), the dimm struct is accessed again, after having been freed already. The fix is to free all the mci device's subsequent dimm and csrow objects at a later point, in _edac_mc_free(), when the mci device itself is being freed. This keeps the data structures intact and the mci device can be fully used until its removal. The change allows the safe usage of mci_for_each_dimm() to release dimm devices from sysfs. 2) Memory leaks: Following memory leaks have been detected: # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c 1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows 16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels 16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn] 1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms 34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc() All leaks are from memory allocated by edac_mc_alloc(). Note: The test above shows that edac_mc_alloc() was called here from ghes_edac_register(), thus both functions show up in the stack trace but the module causing the leaks is edac_mc. The comments with the data structures involved were made manually by analyzing the objdump. The data structures listed above and created by edac_mc_alloc() are not properly removed during device removal, which is done in edac_mc_free(). There are two paths implemented to remove the device depending on device registration, _edac_mc_free() is called if the device is not registered and edac_unregister_sysfs() otherwise. The implemenations differ. For the sysfs case, the mci device removal lacks the removal of subsequent data structures (csrows, channels, dimms). This causes the memory leaks (see mci_attr_release()). [ bp: Massage commit message. ] Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator") Fixes: faa2ad09c01c ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.") Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
2020-02-13 01:25:18 +08:00
_edac_mc_free(mci);
}
EXPORT_SYMBOL_GPL(edac_mc_free);
bool edac_has_mcs(void)
{
bool ret;
mutex_lock(&mem_ctls_mutex);
ret = list_empty(&mc_devices);
mutex_unlock(&mem_ctls_mutex);
return !ret;
}
EXPORT_SYMBOL_GPL(edac_has_mcs);
/* Caller must hold mem_ctls_mutex */
static struct mem_ctl_info *__find_mci_by_dev(struct device *dev)
{
struct mem_ctl_info *mci;
struct list_head *item;
edac_dbg(3, "\n");
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
if (mci->pdev == dev)
return mci;
}
return NULL;
}
/**
* find_mci_by_dev
*
* scan list of controllers looking for the one that manages
* the 'dev' device
* @dev: pointer to a struct device related with the MCI
*/
struct mem_ctl_info *find_mci_by_dev(struct device *dev)
{
struct mem_ctl_info *ret;
mutex_lock(&mem_ctls_mutex);
ret = __find_mci_by_dev(dev);
mutex_unlock(&mem_ctls_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(find_mci_by_dev);
/*
* edac_mc_workq_function
* performs the operation scheduled by a workq request
*/
static void edac_mc_workq_function(struct work_struct *work_req)
{
struct delayed_work *d_work = to_delayed_work(work_req);
struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
mutex_lock(&mem_ctls_mutex);
if (mci->op_state != OP_RUNNING_POLL) {
mutex_unlock(&mem_ctls_mutex);
return;
}
if (edac_op_state == EDAC_OPSTATE_POLL)
mci->edac_check(mci);
mutex_unlock(&mem_ctls_mutex);
/* Queue ourselves again. */
edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec()));
}
/*
* edac_mc_reset_delay_period(unsigned long value)
*
* user space has updated our poll period value, need to
* reset our workq delays
*/
void edac_mc_reset_delay_period(unsigned long value)
{
struct mem_ctl_info *mci;
struct list_head *item;
mutex_lock(&mem_ctls_mutex);
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
if (mci->op_state == OP_RUNNING_POLL)
edac_mod_work(&mci->work, value);
}
mutex_unlock(&mem_ctls_mutex);
}
/* Return 0 on success, 1 on failure.
* Before calling this function, caller must
* assign a unique value to mci->mc_idx.
*
* locking model:
*
* called with the mem_ctls_mutex lock held
*/
static int add_mc_to_global_list(struct mem_ctl_info *mci)
{
struct list_head *item, *insert_before;
struct mem_ctl_info *p;
insert_before = &mc_devices;
p = __find_mci_by_dev(mci->pdev);
if (unlikely(p != NULL))
goto fail0;
list_for_each(item, &mc_devices) {
p = list_entry(item, struct mem_ctl_info, link);
if (p->mc_idx >= mci->mc_idx) {
if (unlikely(p->mc_idx == mci->mc_idx))
goto fail1;
insert_before = item;
break;
}
}
list_add_tail_rcu(&mci->link, insert_before);
return 0;
fail0:
edac_printk(KERN_WARNING, EDAC_MC,
"%s (%s) %s %s already assigned %d\n", dev_name(p->pdev),
edac_dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
return 1;
fail1:
edac_printk(KERN_WARNING, EDAC_MC,
"bug in low-level driver: attempt to assign\n"
" duplicate mc_idx %d in %s()\n", p->mc_idx, __func__);
return 1;
}
static int del_mc_from_global_list(struct mem_ctl_info *mci)
{
list_del_rcu(&mci->link);
/* these are for safe removal of devices from global list while
* NMI handlers may be traversing list
*/
synchronize_rcu();
INIT_LIST_HEAD(&mci->link);
return list_empty(&mc_devices);
}
struct mem_ctl_info *edac_mc_find(int idx)
{
struct mem_ctl_info *mci;
struct list_head *item;
mutex_lock(&mem_ctls_mutex);
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
if (mci->mc_idx == idx)
goto unlock;
}
mci = NULL;
unlock:
mutex_unlock(&mem_ctls_mutex);
return mci;
}
EXPORT_SYMBOL(edac_mc_find);
const char *edac_get_owner(void)
{
return edac_mc_owner;
}
EXPORT_SYMBOL_GPL(edac_get_owner);
/* FIXME - should a warning be printed if no error detection? correction? */
int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci,
const struct attribute_group **groups)
{
int ret = -EINVAL;
edac_dbg(0, "\n");
#ifdef CONFIG_EDAC_DEBUG
if (edac_debug_level >= 3)
edac_mc_dump_mci(mci);
if (edac_debug_level >= 4) {
struct dimm_info *dimm;
int i;
for (i = 0; i < mci->nr_csrows; i++) {
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
struct csrow_info *csrow = mci->csrows[i];
u32 nr_pages = 0;
int j;
edac_mc: Cleanup per-dimm_info debug messages The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-30 21:24:43 +08:00
for (j = 0; j < csrow->nr_channels; j++)
nr_pages += csrow->channels[j]->dimm->nr_pages;
if (!nr_pages)
continue;
edac_mc_dump_csrow(csrow);
for (j = 0; j < csrow->nr_channels; j++)
if (csrow->channels[j]->dimm->nr_pages)
edac_mc_dump_channel(csrow->channels[j]);
}
mci_for_each_dimm(mci, dimm)
edac_mc_dump_dimm(dimm);
}
#endif
mutex_lock(&mem_ctls_mutex);
if (edac_mc_owner && edac_mc_owner != mci->mod_name) {
ret = -EPERM;
goto fail0;
}
if (add_mc_to_global_list(mci))
goto fail0;
/* set load time so that error rate can be tracked */
mci->start_time = jiffies;
mci->bus = edac_get_sysfs_subsys();
EDAC: Fix lockdep splat Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-19 18:28:25 +08:00
if (edac_create_sysfs_mci_device(mci, groups)) {
edac_mc_printk(mci, KERN_WARNING,
"failed to create sysfs device\n");
goto fail1;
}
if (mci->edac_check) {
mci->op_state = OP_RUNNING_POLL;
INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec()));
} else {
mci->op_state = OP_RUNNING_INTERRUPT;
}
/* Report action taken */
edac_mc_printk(mci, KERN_INFO,
"Giving out device to module %s controller %s: DEV %s (%s)\n",
mci->mod_name, mci->ctl_name, mci->dev_name,
edac_op_state_to_string(mci->op_state));
edac_mc_owner = mci->mod_name;
mutex_unlock(&mem_ctls_mutex);
return 0;
fail1:
del_mc_from_global_list(mci);
fail0:
mutex_unlock(&mem_ctls_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(edac_mc_add_mc_with_groups);
struct mem_ctl_info *edac_mc_del_mc(struct device *dev)
{
struct mem_ctl_info *mci;
edac_dbg(0, "\n");
mutex_lock(&mem_ctls_mutex);
/* find the requested mci struct in the global list */
mci = __find_mci_by_dev(dev);
if (mci == NULL) {
mutex_unlock(&mem_ctls_mutex);
return NULL;
}
/* mark MCI offline: */
mci->op_state = OP_OFFLINE;
if (del_mc_from_global_list(mci))
edac_mc_owner = NULL;
mutex_unlock(&mem_ctls_mutex);
if (mci->edac_check)
edac_stop_work(&mci->work);
/* remove from sysfs */
edac_remove_sysfs_mci_device(mci);
edac_printk(KERN_INFO, EDAC_MC,
"Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
mci->mod_name, mci->ctl_name, edac_dev_name(mci));
return mci;
}
EXPORT_SYMBOL_GPL(edac_mc_del_mc);
static void edac_mc_scrub_block(unsigned long page, unsigned long offset,
u32 size)
{
struct page *pg;
void *virt_addr;
unsigned long flags = 0;
edac_dbg(3, "\n");
/* ECC error page was not in our memory. Ignore it. */
if (!pfn_valid(page))
return;
/* Find the actual page structure then map it and fix */
pg = pfn_to_page(page);
if (PageHighMem(pg))
local_irq_save(flags);
virt_addr = kmap_atomic(pg);
/* Perform architecture specific atomic scrub operation */
EDAC: Cleanup atomic_scrub mess So first of all, this atomic_scrub() function's naming is bad. It looks like an atomic_t helper. Change it to edac_atomic_scrub(). The bigger problem is that this function is arch-specific and every new arch which doesn't necessarily need that functionality still needs to define it, otherwise EDAC doesn't compile. So instead of doing that and including arch-specific headers, have each arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c for ifdeffery. Much cleaner. And we already are doing this with another symbol - EDAC_SUPPORT. This is also much cleaner than having CONFIG_EDAC enumerate all the arches which need/have EDAC support and drivers. This way I can kill the useless edac.h header in tile too. Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Doug Thompson <dougthompson@xmission.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Cc: "Maciej W. Rozycki" <macro@codesourcery.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: x86@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2015-05-22 01:59:31 +08:00
edac_atomic_scrub(virt_addr + offset, size);
/* Unmap and complete */
kunmap_atomic(virt_addr);
if (PageHighMem(pg))
local_irq_restore(flags);
}
/* FIXME - should return -1 */
int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page)
{
struct csrow_info **csrows = mci->csrows;
int row, i, j, n;
edac_dbg(1, "MC%d: 0x%lx\n", mci->mc_idx, page);
row = -1;
for (i = 0; i < mci->nr_csrows; i++) {
struct csrow_info *csrow = csrows[i];
n = 0;
for (j = 0; j < csrow->nr_channels; j++) {
struct dimm_info *dimm = csrow->channels[j]->dimm;
n += dimm->nr_pages;
}
if (n == 0)
continue;
edac_dbg(3, "MC%d: first(0x%lx) page(0x%lx) last(0x%lx) mask(0x%lx)\n",
mci->mc_idx,
csrow->first_page, page, csrow->last_page,
csrow->page_mask);
if ((page >= csrow->first_page) &&
(page <= csrow->last_page) &&
((page & csrow->page_mask) ==
(csrow->first_page & csrow->page_mask))) {
row = i;
break;
}
}
if (row == -1)
edac_mc_printk(mci, KERN_ERR,
"could not look up page error address %lx\n",
(unsigned long)page);
return row;
}
EXPORT_SYMBOL_GPL(edac_mc_find_csrow_by_page);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
const char *edac_layer_name[] = {
[EDAC_MC_LAYER_BRANCH] = "branch",
[EDAC_MC_LAYER_CHANNEL] = "channel",
[EDAC_MC_LAYER_SLOT] = "slot",
[EDAC_MC_LAYER_CHIP_SELECT] = "csrow",
[EDAC_MC_LAYER_ALL_MEM] = "memory",
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
};
EXPORT_SYMBOL_GPL(edac_layer_name);
static void edac_inc_ce_error(struct edac_raw_error_desc *e)
{
int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer };
struct mem_ctl_info *mci = error_desc_to_mci(e);
struct dimm_info *dimm = edac_get_dimm(mci, pos[0], pos[1], pos[2]);
mci->ce_mc += e->error_count;
if (dimm)
dimm->ce_count += e->error_count;
else
mci->ce_noinfo_count += e->error_count;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
static void edac_inc_ue_error(struct edac_raw_error_desc *e)
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
{
int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer };
struct mem_ctl_info *mci = error_desc_to_mci(e);
struct dimm_info *dimm = edac_get_dimm(mci, pos[0], pos[1], pos[2]);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
mci->ue_mc += e->error_count;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
if (dimm)
dimm->ue_count += e->error_count;
else
mci->ue_noinfo_count += e->error_count;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
static void edac_ce_error(struct edac_raw_error_desc *e)
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
{
struct mem_ctl_info *mci = error_desc_to_mci(e);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
unsigned long remapped_page;
if (edac_mc_get_log_ce()) {
edac_mc_printk(mci, KERN_WARNING,
"%d CE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx%s%s)\n",
e->error_count, e->msg,
*e->msg ? " " : "",
e->label, e->location, e->page_frame_number, e->offset_in_page,
e->grain, e->syndrome,
*e->other_detail ? " - " : "",
e->other_detail);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
edac_inc_ce_error(e);
if (mci->scrub_mode == SCRUB_SW_SRC) {
/*
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
* Some memory controllers (called MCs below) can remap
* memory so that it is still available at a different
* address when PCI devices map into memory.
* MC's that can't do this, lose the memory where PCI
* devices are mapped. This mapping is MC-dependent
* and so we call back into the MC driver for it to
* map the MC page to a physical (CPU) page which can
* then be mapped to a virtual page - which can then
* be scrubbed.
*/
remapped_page = mci->ctl_page_to_phys ?
mci->ctl_page_to_phys(mci, e->page_frame_number) :
e->page_frame_number;
edac_mc_scrub_block(remapped_page, e->offset_in_page, e->grain);
}
}
static void edac_ue_error(struct edac_raw_error_desc *e)
{
struct mem_ctl_info *mci = error_desc_to_mci(e);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
if (edac_mc_get_log_ue()) {
edac_mc_printk(mci, KERN_WARNING,
"%d UE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld%s%s)\n",
e->error_count, e->msg,
*e->msg ? " " : "",
e->label, e->location, e->page_frame_number, e->offset_in_page,
e->grain,
*e->other_detail ? " - " : "",
e->other_detail);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
if (edac_mc_get_panic_on_ue()) {
panic("UE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld%s%s)\n",
e->msg,
*e->msg ? " " : "",
e->label, e->location, e->page_frame_number, e->offset_in_page,
e->grain,
*e->other_detail ? " - " : "",
e->other_detail);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
edac_inc_ue_error(e);
}
static void edac_inc_csrow(struct edac_raw_error_desc *e, int row, int chan)
{
struct mem_ctl_info *mci = error_desc_to_mci(e);
enum hw_event_mc_err_type type = e->type;
u16 count = e->error_count;
if (row < 0)
return;
edac_dbg(4, "csrow/channel to increment: (%d,%d)\n", row, chan);
if (type == HW_EVENT_ERR_CORRECTED) {
mci->csrows[row]->ce_count += count;
if (chan >= 0)
mci->csrows[row]->channels[chan]->ce_count += count;
} else {
mci->csrows[row]->ue_count += count;
}
}
void edac_raw_mc_handle_error(struct edac_raw_error_desc *e)
{
struct mem_ctl_info *mci = error_desc_to_mci(e);
u8 grain_bits;
/* Sanity-check driver-supplied grain value. */
if (WARN_ON_ONCE(!e->grain))
e->grain = 1;
grain_bits = fls_long(e->grain - 1);
/* Report the error via the trace interface */
if (IS_ENABLED(CONFIG_RAS))
trace_mc_event(e->type, e->msg, e->label, e->error_count,
mci->mc_idx, e->top_layer, e->mid_layer,
e->low_layer,
(e->page_frame_number << PAGE_SHIFT) | e->offset_in_page,
grain_bits, e->syndrome, e->other_detail);
if (e->type == HW_EVENT_ERR_CORRECTED)
edac_ce_error(e);
else
edac_ue_error(e);
}
EXPORT_SYMBOL_GPL(edac_raw_mc_handle_error);
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
void edac_mc_handle_error(const enum hw_event_mc_err_type type,
struct mem_ctl_info *mci,
const u16 error_count,
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
const unsigned long page_frame_number,
const unsigned long offset_in_page,
const unsigned long syndrome,
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
const int top_layer,
const int mid_layer,
const int low_layer,
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
const char *msg,
const char *other_detail)
{
struct dimm_info *dimm;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
char *p;
int row = -1, chan = -1;
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
int pos[EDAC_MAX_LAYERS] = { top_layer, mid_layer, low_layer };
int i, n_labels = 0;
struct edac_raw_error_desc *e = &mci->error_desc;
bool any_memory = true;
edac_dbg(3, "MC%d\n", mci->mc_idx);
/* Fills the error report buffer */
memset(e, 0, sizeof (*e));
e->error_count = error_count;
e->type = type;
e->top_layer = top_layer;
e->mid_layer = mid_layer;
e->low_layer = low_layer;
e->page_frame_number = page_frame_number;
e->offset_in_page = offset_in_page;
e->syndrome = syndrome;
/* need valid strings here for both: */
e->msg = msg ?: "";
e->other_detail = other_detail ?: "";
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/*
* Check if the event report is consistent and if the memory location is
* known. If it is, the DIMM(s) label info will be filled and the DIMM's
* error counters will be incremented.
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
*/
for (i = 0; i < mci->n_layers; i++) {
if (pos[i] >= (int)mci->layers[i].size) {
edac_mc_printk(mci, KERN_ERR,
"INTERNAL ERROR: %s value is out of range (%d >= %d)\n",
edac_layer_name[mci->layers[i].type],
pos[i], mci->layers[i].size);
/*
* Instead of just returning it, let's use what's
* known about the error. The increment routines and
* the DIMM filter logic will do the right thing by
* pointing the likely damaged DIMMs.
*/
pos[i] = -1;
}
if (pos[i] >= 0)
any_memory = false;
}
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/*
* Get the dimm label/grain that applies to the match criteria.
* As the error algorithm may not be able to point to just one memory
* stick, the logic here will get all possible labels that could
* pottentially be affected by the error.
* On FB-DIMM memory controllers, for uncorrected errors, it is common
* to have only the MC channel and the MC dimm (also called "branch")
* but the channel is not known, as the memory is arranged in pairs,
* where each memory belongs to a separate channel within the same
* branch.
*/
p = e->label;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
*p = '\0';
mci_for_each_dimm(mci, dimm) {
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
if (top_layer >= 0 && top_layer != dimm->location[0])
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
continue;
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
if (mid_layer >= 0 && mid_layer != dimm->location[1])
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
continue;
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
if (low_layer >= 0 && low_layer != dimm->location[2])
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
continue;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/* get the max grain, over the error match range */
if (dimm->grain > e->grain)
e->grain = dimm->grain;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/*
* If the error is memory-controller wide, there's no need to
* seek for the affected DIMMs because the whole channel/memory
* controller/... may be affected. Also, don't show errors for
* empty DIMM slots.
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
*/
if (!dimm->nr_pages)
continue;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
n_labels++;
if (n_labels > EDAC_MAX_LABELS) {
p = e->label;
*p = '\0';
} else {
if (p != e->label) {
strcpy(p, OTHER_LABEL);
p += strlen(OTHER_LABEL);
}
strcpy(p, dimm->label);
p += strlen(p);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
}
/*
* get csrow/channel of the DIMM, in order to allow
* incrementing the compat API counters
*/
edac_dbg(4, "%s csrows map: (%d,%d)\n",
mci->csbased ? "rank" : "dimm",
dimm->csrow, dimm->cschannel);
if (row == -1)
row = dimm->csrow;
else if (row >= 0 && row != dimm->csrow)
row = -2;
if (chan == -1)
chan = dimm->cschannel;
else if (chan >= 0 && chan != dimm->cschannel)
chan = -2;
}
if (any_memory)
strcpy(e->label, "any memory");
else if (!*e->label)
strcpy(e->label, "unknown memory");
edac_inc_csrow(e, row, chan);
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
/* Fill the RAM location data */
p = e->location;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
for (i = 0; i < mci->n_layers; i++) {
if (pos[i] < 0)
continue;
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
p += sprintf(p, "%s:%d ",
edac_layer_name[mci->layers[i].type],
pos[i]);
}
if (p > e->location)
RAS: Add a tracepoint for reporting memory controller events Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-23 19:10:34 +08:00
*(p - 1) = '\0';
edac_raw_mc_handle_error(e);
}
edac: Change internal representation to work with layers Change the EDAC internal representation to work with non-csrow based memory controllers. There are lots of those memory controllers nowadays, and more are coming. So, the EDAC internal representation needs to be changed, in order to work with those memory controllers, while preserving backward compatibility with the old ones. The edac core was written with the idea that memory controllers are able to directly access csrows. This is not true for FB-DIMM and RAMBUS memory controllers. Also, some recent advanced memory controllers don't present a per-csrows view. Instead, they view memories as DIMMs, instead of ranks. So, change the allocation and error report routines to allow them to work with all types of architectures. This will allow the removal of several hacks with FB-DIMM and RAMBUS memory controllers. Also, several tests were done on different platforms using different x86 drivers. TODO: a multi-rank DIMMs are currently represented by multiple DIMM entries in struct dimm_info. That means that changing a label for one rank won't change the same label for the other ranks at the same DIMM. This bug is present since the beginning of the EDAC, so it is not a big deal. However, on several drivers, it is possible to fix this issue, but it should be a per-driver fix, as the csrow => DIMM arrangement may not be equal for all. So, don't try to fix it here yet. I tried to make this patch as short as possible, preceding it with several other patches that simplified the logic here. Yet, as the internal API changes, all drivers need changes. The changes are generally bigger in the drivers for FB-DIMMs. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 02:20:50 +08:00
EXPORT_SYMBOL_GPL(edac_mc_handle_error);