UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/kernel/perf_event_v7.c

1251 lines
33 KiB
C
Raw Normal View History

ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/*
* ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
*
* ARMv7 support: Jean Pihet <jpihet@mvista.com>
* 2010 (c) MontaVista Software, LLC.
*
* Copied from ARMv6 code, with the low level code inspired
* by the ARMv7 Oprofile code.
*
* Cortex-A8 has up to 4 configurable performance counters and
* a single cycle counter.
* Cortex-A9 has up to 31 configurable performance counters and
* a single cycle counter.
*
* All counters can be enabled/disabled and IRQ masked separately. The cycle
* counter and all 4 performance counters together can be reset separately.
*/
#ifdef CONFIG_CPU_V7
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
/*
* Common ARMv7 event types
*
* Note: An implementation may not be able to count all of these events
* but the encodings are considered to be `reserved' in the case that
* they are not available.
*/
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
enum armv7_perf_types {
ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
ARMV7_PERFCTR_IFETCH_MISS = 0x01,
ARMV7_PERFCTR_ITLB_MISS = 0x02,
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */
ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
ARMV7_PERFCTR_DTLB_REFILL = 0x05,
ARMV7_PERFCTR_DREAD = 0x06,
ARMV7_PERFCTR_DWRITE = 0x07,
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
ARMV7_PERFCTR_EXC_TAKEN = 0x09,
ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
ARMV7_PERFCTR_CID_WRITE = 0x0B,
/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
* It counts:
* - all branch instructions,
* - instructions that explicitly write the PC,
* - exception generating instructions.
*/
ARMV7_PERFCTR_PC_WRITE = 0x0C,
ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
ARM: perf: add PMUv2 common event definitions The PMUv2 specification reserves a number of event encodings for common events. This patch adds these events to the common event enumeration in preparation for PMUv2 cores, such as Cortex-A15. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:15:34 +08:00
ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
ARMV7_PERFCTR_MEM_ACCESS = 0x13,
ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16,
ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17,
ARMV7_PERFCTR_L2_DCACHE_WB = 0x18,
ARMV7_PERFCTR_BUS_ACCESS = 0x19,
ARMV7_PERFCTR_MEMORY_ERROR = 0x1A,
ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
ARMV7_PERFCTR_CPU_CYCLES = 0xFF
};
/* ARMv7 Cortex-A8 specific event types */
enum armv7_a8_perf_types {
ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
ARMV7_PERFCTR_L2_ACCESS = 0x43,
ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
ARMV7_PERFCTR_L2_NEON = 0x4E,
ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
ARMV7_PERFCTR_L1_INST = 0x50,
ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
ARMV7_PERFCTR_OP_EXECUTED = 0x55,
ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
ARMV7_PERFCTR_CYCLES_INST = 0x57,
ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
ARMV7_PERFCTR_PMU_EVENTS = 0x72,
};
/* ARMv7 Cortex-A9 specific event types */
enum armv7_a9_perf_types {
ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
ARMV7_PERFCTR_DATA_EVICTION = 0x65,
ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
ARMV7_PERFCTR_ISB_INST = 0x90,
ARMV7_PERFCTR_DSB_INST = 0x91,
ARMV7_PERFCTR_DMB_INST = 0x92,
ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
};
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
/* ARMv7 Cortex-A5 specific event types */
enum armv7_a5_perf_types {
ARMV7_PERFCTR_IRQ_TAKEN = 0x86,
ARMV7_PERFCTR_FIQ_TAKEN = 0x87,
ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0,
ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1,
ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2,
ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4,
ARMV7_PERFCTR_READ_ALLOC = 0xc5,
ARMV7_PERFCTR_STALL_SB_FULL = 0xc9,
};
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
/* ARMv7 Cortex-A15 specific event types */
enum armv7_a15_perf_types {
ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40,
ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41,
ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42,
ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43,
ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C,
ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D,
ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50,
ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51,
ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52,
ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53,
ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76,
};
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/*
* Cortex-A8 HW events mapping
*
* The hardware events that we support. We do support cache operations but
* we have harvard caches and no way to combine instruction and data
* accesses/misses in hardware.
*/
static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
};
static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
/*
* The performance counters don't differentiate between read
* and write accesses/misses so this isn't strictly correct,
* but it's the best we can do. Writes and reads get
* combined.
*/
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
[C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
perf, arch: Add generic NODE cache events Add a NODE level to the generic cache events which is used to measure local vs remote memory accesses. Like all other cache events, an ACCESS is HIT+MISS, if there is no way to distinguish between reads and writes do reads only etc.. The below needs filling out for !x86 (which I filled out with unsupported events). I'm fairly sure ARM can leave it like that since it doesn't strike me as an architecture that even has NUMA support. SH might have something since it does appear to have some NUMA bits. Sparc64, PowerPC and MIPS certainly want a good look there since they clearly are NUMA capable. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-23 05:37:06 +08:00
[C(NODE)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
};
/*
* Cortex-A9 HW events mapping
*/
static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] =
ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
[PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
[PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
};
static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
/*
* The performance counters don't differentiate between read
* and write accesses/misses so this isn't strictly correct,
* but it's the best we can do. Writes and reads get
* combined.
*/
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
perf, arch: Add generic NODE cache events Add a NODE level to the generic cache events which is used to measure local vs remote memory accesses. Like all other cache events, an ACCESS is HIT+MISS, if there is no way to distinguish between reads and writes do reads only etc.. The below needs filling out for !x86 (which I filled out with unsupported events). I'm fairly sure ARM can leave it like that since it doesn't strike me as an architecture that even has NUMA support. SH might have something since it does appear to have some NUMA bits. Sparc64, PowerPC and MIPS certainly want a good look there since they clearly are NUMA capable. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-23 05:37:06 +08:00
[C(NODE)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
};
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
/*
* Cortex-A5 HW events mapping
*/
static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_DCACHE_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_PREFETCH_LINEFILL,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
/*
* The prefetch counters don't differentiate between the I
* side and the D side.
*/
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_PREFETCH_LINEFILL,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
};
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
/*
* Cortex-A15 HW events mapping
*/
static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
};
static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(L1I)] = {
/*
* Not all performance counters differentiate between read
* and write accesses/misses so we're not always strictly
* correct, but it's the best we can do. Writes and reads get
* combined in these cases.
*/
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
[C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)]
= ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
[C(RESULT_MISS)]
= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
};
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/*
* Perf Events counters
*/
enum armv7_counters {
ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
ARMV7_COUNTER0 = 2, /* First event counter */
};
/*
* The cycle counter is ARMV7_CYCLE_COUNTER.
* The first event counter is ARMV7_COUNTER0.
* The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
*/
#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
/*
* ARMv7 low level PMNC access
*/
/*
* Per-CPU PMNC: config reg
*/
#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
#define ARMV7_PMNC_N_MASK 0x1f
#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
/*
* Available counters
*/
#define ARMV7_CNT0 0 /* First event counter */
#define ARMV7_CCNT 31 /* Cycle counter */
/* Perf Event to low level counters mapping */
#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
/*
* CNTENS: counters enable reg
*/
#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
/*
* CNTENC: counters disable reg
*/
#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
/*
* INTENS: counters overflow interrupt enable reg
*/
#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
/*
* INTENC: counters overflow interrupt disable reg
*/
#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
/*
* EVTSEL: Event selection reg
*/
#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
/*
* SELECT: Counter selection reg
*/
#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
/*
* FLAG: counters overflow flag status reg
*/
#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
static inline u32 armv7_pmnc_read(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
return val;
}
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
static inline void armv7_pmnc_write(u32 val)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
val &= ARMV7_PMNC_MASK;
ARM: 6833/1: perf: add required isbs() to ARMv7 backend The ARMv7 architecture does not guarantee that effects from co-processor writes are immediately visible to following instructions. This patch adds two isbs to the ARMv7 perf code: (1) Immediately after selecting an event register, so that the PMU state following this instruction is consistent with the new event. (2) Immediately before writing to the PMCR, so that any previous writes to the PMU have taken effect before (typically) enabling the counters. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:12:23 +08:00
isb();
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
static inline int armv7_pmnc_has_overflowed(u32 pmnc)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
return pmnc & ARMV7_OVERFLOWED_MASK;
}
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc,
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
enum armv7_counters counter)
{
int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;
else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
ret = pmnc & ARMV7_FLAG_P(counter);
else
pr_err("CPU%u checking wrong counter %d overflow status\n",
smp_processor_id(), counter);
return ret;
}
static inline int armv7_pmnc_select_counter(unsigned int idx)
{
u32 val;
if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
pr_err("CPU%u selecting wrong PMNC counter"
" %d\n", smp_processor_id(), idx);
return -1;
}
val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
ARM: 6833/1: perf: add required isbs() to ARMv7 backend The ARMv7 architecture does not guarantee that effects from co-processor writes are immediately visible to following instructions. This patch adds two isbs to the ARMv7 perf code: (1) Immediately after selecting an event register, so that the PMU state following this instruction is consistent with the new event. (2) Immediately before writing to the PMCR, so that any previous writes to the PMU have taken effect before (typically) enabling the counters. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:12:23 +08:00
isb();
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
return idx;
}
static inline u32 armv7pmu_read_counter(int idx)
{
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
u32 value = 0;
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
if (idx == ARMV7_CYCLE_COUNTER)
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
if (armv7_pmnc_select_counter(idx) == idx)
asm volatile("mrc p15, 0, %0, c9, c13, 2"
: "=r" (value));
} else
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
return value;
}
static inline void armv7pmu_write_counter(int idx, u32 value)
{
if (idx == ARMV7_CYCLE_COUNTER)
asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
if (armv7_pmnc_select_counter(idx) == idx)
asm volatile("mcr p15, 0, %0, c9, c13, 2"
: : "r" (value));
} else
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
}
static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
{
if (armv7_pmnc_select_counter(idx) == idx) {
val &= ARMV7_EVTSEL_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
{
u32 val;
if ((idx != ARMV7_CYCLE_COUNTER) &&
((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
pr_err("CPU%u enabling wrong PMNC counter"
" %d\n", smp_processor_id(), idx);
return -1;
}
if (idx == ARMV7_CYCLE_COUNTER)
val = ARMV7_CNTENS_C;
else
val = ARMV7_CNTENS_P(idx);
asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
return idx;
}
static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
{
u32 val;
if ((idx != ARMV7_CYCLE_COUNTER) &&
((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
pr_err("CPU%u disabling wrong PMNC counter"
" %d\n", smp_processor_id(), idx);
return -1;
}
if (idx == ARMV7_CYCLE_COUNTER)
val = ARMV7_CNTENC_C;
else
val = ARMV7_CNTENC_P(idx);
asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
return idx;
}
static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
{
u32 val;
if ((idx != ARMV7_CYCLE_COUNTER) &&
((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
pr_err("CPU%u enabling wrong PMNC counter"
" interrupt enable %d\n", smp_processor_id(), idx);
return -1;
}
if (idx == ARMV7_CYCLE_COUNTER)
val = ARMV7_INTENS_C;
else
val = ARMV7_INTENS_P(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
return idx;
}
static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
{
u32 val;
if ((idx != ARMV7_CYCLE_COUNTER) &&
((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
pr_err("CPU%u disabling wrong PMNC counter"
" interrupt enable %d\n", smp_processor_id(), idx);
return -1;
}
if (idx == ARMV7_CYCLE_COUNTER)
val = ARMV7_INTENC_C;
else
val = ARMV7_INTENC_P(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
return idx;
}
static inline u32 armv7_pmnc_getreset_flags(void)
{
u32 val;
/* Read */
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
/* Write to clear flags */
val &= ARMV7_FLAG_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
return val;
}
#ifdef DEBUG
static void armv7_pmnc_dump_regs(void)
{
u32 val;
unsigned int cnt;
printk(KERN_INFO "PMNC registers dump:\n");
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
printk(KERN_INFO "PMNC =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
printk(KERN_INFO "CNTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
printk(KERN_INFO "INTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
printk(KERN_INFO "FLAGS =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
printk(KERN_INFO "SELECT=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n",
cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
}
}
#endif
ARM: 6512/1: perf: fix warnings generated by sparse Russell reported a number of warnings coming from sparse when checking the ARM perf_event.c files: | perf_event.c seems to also have problems too: | | CHECK arch/arm/kernel/perf_event.c | arch/arm/kernel/perf_event.c:37:1: warning: symbol 'pmu_lock' was not declared. Should it be static? | arch/arm/kernel/perf_event.c:70:1: warning: symbol 'cpu_hw_events' was not declared. Should it be static? | arch/arm/kernel/perf_event.c:1006:1: warning: symbol 'armv6pmu_enable_event' was not declared. Should it be static? | arch/arm/kernel/perf_event.c:1113:1: warning: symbol 'armv6pmu_stop' was not declared. Should it be static? | arch/arm/kernel/perf_event.c:1956:6: warning: symbol 'armv7pmu_enable_event' was not declared. Should it be static? | arch/arm/kernel/perf_event.c:3072:14: warning: incorrect type in argument 1 (different address spaces) | arch/arm/kernel/perf_event.c:3072:14: expected void const volatile [noderef] <asn:1>*<noident> | arch/arm/kernel/perf_event.c:3072:14: got struct frame_tail *tail | arch/arm/kernel/perf_event.c:3074:49: warning: incorrect type in argument 2 (different address spaces) | arch/arm/kernel/perf_event.c:3074:49: expected void const [noderef] <asn:1>*from | arch/arm/kernel/perf_event.c:3074:49: got struct frame_tail *tail This patch resolves these issues so we can live in silence again. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-01 01:15:53 +08:00
static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
unsigned long flags;
/*
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_lock_irqsave(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/*
* Disable counter
*/
armv7_pmnc_disable_counter(idx);
/*
* Set event (if destined for PMNx counters)
* We don't need to set the event if it's a cycle count
*/
if (idx != ARMV7_CYCLE_COUNTER)
armv7_pmnc_write_evtsel(idx, hwc->config_base);
/*
* Enable interrupt for this counter
*/
armv7_pmnc_enable_intens(idx);
/*
* Enable counter
*/
armv7_pmnc_enable_counter(idx);
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_unlock_irqrestore(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
/*
* Disable counter and interrupt
*/
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_lock_irqsave(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/*
* Disable counter
*/
armv7_pmnc_disable_counter(idx);
/*
* Disable interrupt for this counter
*/
armv7_pmnc_disable_intens(idx);
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_unlock_irqrestore(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
{
ARM: perf: use u32 instead of unsigned long for PMNC register The ARMv7 perf backend mixes up u32 and unsigned long, which is rather ugly. This patch makes the ARMv7 PMU code consistently use the u32 type instead. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-07-19 21:55:57 +08:00
u32 pmnc;
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
struct perf_sample_data data;
struct cpu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
/*
* Get and reset the IRQ flags
*/
pmnc = armv7_pmnc_getreset_flags();
/*
* Did an overflow occur?
*/
if (!armv7_pmnc_has_overflowed(pmnc))
return IRQ_NONE;
/*
* Handle the counter(s) overflow(s)
*/
regs = get_irq_regs();
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
for (idx = 0; idx <= armpmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!test_bit(idx, cpuc->active_mask))
continue;
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
*/
if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
continue;
hwc = &event->hw;
ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency If a counter overflows during a perf stat profiling run it may overtake the last known value of the counter: 0 prev new 0xffffffff |----------|-------|----------------------| In this case, the number of events that have occurred is (0xffffffff - prev) + new. Unfortunately, the event update code will not realise an overflow has occurred and will instead report the event delta as (new - prev) which may be considerably smaller than the real count. This patch adds an extra argument to armpmu_event_update which indicates whether or not an overflow has occurred. If an overflow has occurred then we use the maximum period of the counter to calculate the elapsed events. Acked-by: Jamie Iles <jamie@jamieiles.com> Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-26 00:12:37 +08:00
armpmu_event_update(event, hwc, idx, 1);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
perf: Remove the nmi parameter from the swevent and overflow interface The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Will Deacon <will.deacon@arm.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-27 20:41:57 +08:00
if (perf_event_overflow(event, &data, regs))
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
armpmu->disable(hwc, idx);
}
/*
* Handle the pending perf events.
*
* Note: this call *must* be run with interrupts disabled. For
* platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
irq_work_run();
return IRQ_HANDLED;
}
static void armv7pmu_start(void)
{
unsigned long flags;
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_lock_irqsave(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_unlock_irqrestore(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
}
static void armv7pmu_stop(void)
{
unsigned long flags;
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_lock_irqsave(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
ARM: 6521/1: perf: use raw_spinlock_t for pmu_lock For kernels built with PREEMPT_RT, critical sections protected by standard spinlocks are preemptible. This is not acceptable on perf as (a) we may be scheduled onto a different CPU whilst reading/writing banked PMU registers and (b) the latency when reading the PMU registers becomes unpredictable. This patch upgrades the pmu_lock spinlock to a raw_spinlock instead. Reported-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03 01:01:49 +08:00
raw_spin_unlock_irqrestore(&pmu_lock, flags);
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
}
static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx;
/* Always place a cycle counter into the cycle counter. */
if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
return ARMV7_CYCLE_COUNTER;
} else {
/*
* For anything other than a cycle counter, try and use
* the events counters
*/
for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
if (!test_and_set_bit(idx, cpuc->used_mask))
return idx;
}
/* The counters are all in use. */
return -EAGAIN;
}
}
ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:13:34 +08:00
static void armv7pmu_reset(void *info)
{
u32 idx, nb_cnt = armpmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
for (idx = 1; idx < nb_cnt; ++idx)
armv7pmu_disable_event(NULL, idx);
/* Initialize & Reset PMNC: C and P bits */
armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
}
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
.disable = armv7pmu_disable_event,
.read_counter = armv7pmu_read_counter,
.write_counter = armv7pmu_write_counter,
.get_event_idx = armv7pmu_get_event_idx,
.start = armv7pmu_start,
.stop = armv7pmu_stop,
ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:13:34 +08:00
.reset = armv7pmu_reset,
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
.raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:13:34 +08:00
static u32 __init armv7_read_num_pmnc_events(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
u32 nb_cnt;
/* Read the nb of CNTx counters supported from PMNC */
nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
/* Add the CPU cycles counter and return */
return nb_cnt + 1;
}
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a8_pmu_init(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
armv7pmu.cache_map = &armv7_a8_perf_cache_map;
armv7pmu.event_map = &armv7_a8_perf_map;
ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:13:34 +08:00
armv7pmu.num_events = armv7_read_num_pmnc_events();
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
return &armv7pmu;
}
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a9_pmu_init(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
armv7pmu.cache_map = &armv7_a9_perf_cache_map;
armv7pmu.event_map = &armv7_a9_perf_map;
ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-25 20:13:34 +08:00
armv7pmu.num_events = armv7_read_num_pmnc_events();
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
return &armv7pmu;
}
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a5_pmu_init(void)
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
armv7pmu.cache_map = &armv7_a5_perf_cache_map;
armv7pmu.event_map = &armv7_a5_perf_map;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a15_pmu_init(void)
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
armv7pmu.cache_map = &armv7_a15_perf_cache_map;
armv7pmu.event_map = &armv7_a15_perf_map;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
#else
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a8_pmu_init(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
return NULL;
}
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a9_pmu_init(void)
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
{
return NULL;
}
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a5_pmu_init(void)
ARM: perf: add support for the Cortex-A5 PMU This patch adds support for the Cortex-A5 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-06-04 00:40:15 +08:00
{
return NULL;
}
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
ARM: perf: de-const struct arm_pmu This patch removes const qualifiers from instances of struct arm_pmu, and functions initialising them, in preparation for generalising arm_pmu usage to system (AKA uncore) PMUs. This will allow for dynamically modifiable structures (locks, struct pmu) to be added as members of struct arm_pmu. Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-04-15 18:14:38 +08:00
static struct arm_pmu *__init armv7_a15_pmu_init(void)
ARM: perf: add support for the Cortex-A15 PMU This patch adds support for the Cortex-A15 PMU to the ARMv7 perf-event backend. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-01-19 22:24:38 +08:00
{
return NULL;
}
ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-14 03:04:32 +08:00
#endif /* CONFIG_CPU_V7 */