UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/soc/samsung/Makefile

18 lines
595 B
Makefile
Raw Normal View History

soc: samsung: Add SPDX license identifiers Replace GPL license statements with SPDX GPL-2.0 license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-12-26 04:17:59 +08:00
# SPDX-License-Identifier: GPL-2.0
soc: samsung: Add exynos chipid driver support Exynos SoCs have Chipid, for identification of product IDs and SoC revisions. This patch intends to provide initialization code for all these functionalities, at the same time it provides some sysfs entries for accessing these information to user-space. This driver uses existing binding for exynos-chipid. Changes by Bartlomiej: - fixed return values on errors - removed bogus kfree_const() - added missing Exynos4210 EVT0 id - converted code to use EXYNOS_MASK define - fixed np use after of_node_put() - fixed too early use of dev_info() - made driver fail for unknown SoC-s - added SPDX tag - updated Copyrights Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> [m.szyprowski: for suggestion and code snippet of product_id_to_soc_id] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [s.nawrocki: updated copyright date, removed uneeded headers inclusion] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-13 23:08:19 +08:00
soc: samsung: Add Exynos Adaptive Supply Voltage driver The Adaptive Supply Voltage (ASV) driver adjusts CPU cluster operating points depending on exact revision of an SoC retrieved from the CHIPID block or the OTP memory. This allows for some power saving as for some CPU clock frequencies we can lower CPU cluster's supply voltage comparing to safe values common to all the SoC revisions. This patch adds support for Exynos5422/5800 SoC, it is partially based on code from https://github.com/hardkernel/linux repository, branch odroidxu4-4.14.y, files: arch/arm/mach-exynos/exynos5422-asv.[ch]. Tested on Odroid XU3, XU4, XU3 Lite. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-28 23:15:33 +08:00
obj-$(CONFIG_EXYNOS_ASV_ARM) += exynos5422-asv.o
soc: samsung: exynos-chipid: convert to a module Exynos ChipID and ASV (Adaptive Supply Voltage) driver is not essential to system boot and it can successfully be built and loaded as module. This makes core kernel image smaller and reduces the memory footprint when multi-platform kernel is booted on non-Exynos board. Usually it is also distro-friendly. Add multiple authors of the driver since its conversion from mach-exynos, ordered alphabetically by first name. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Tested-by: Sylwester Nawrocki <snawrocki@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20210919093114.35987-3-krzysztof.kozlowski@canonical.com
2021-09-19 17:31:13 +08:00
obj-$(CONFIG_EXYNOS_CHIPID) += exynos_chipid.o
exynos_chipid-y += exynos-chipid.o exynos-asv.o
soc: samsung: Add Exynos Adaptive Supply Voltage driver The Adaptive Supply Voltage (ASV) driver adjusts CPU cluster operating points depending on exact revision of an SoC retrieved from the CHIPID block or the OTP memory. This allows for some power saving as for some CPU clock frequencies we can lower CPU cluster's supply voltage comparing to safe values common to all the SoC revisions. This patch adds support for Exynos5422/5800 SoC, it is partially based on code from https://github.com/hardkernel/linux repository, branch odroidxu4-4.14.y, files: arch/arm/mach-exynos/exynos5422-asv.[ch]. Tested on Odroid XU3, XU4, XU3 Lite. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-10-28 23:15:33 +08:00
soc: samsung: Add USI driver USIv2 IP-core is found on modern ARM64 Exynos SoCs (like Exynos850) and provides selectable serial protocol (one of: UART, SPI, I2C). USIv2 registers usually reside in the same register map as a particular underlying protocol it implements, but have some particular offset. E.g. on Exynos850 the USI_UART has 0x13820000 base address, where UART registers have 0x00..0x40 offsets, and USI registers have 0xc0..0xdc offsets. Desired protocol can be chosen via SW_CONF register from System Register block of the same domain as USI. Before starting to use a particular protocol, USIv2 must be configured properly: 1. Select protocol to be used via System Register 2. Clear "reset" flag in USI_CON 3. Configure HWACG behavior (e.g. for UART Rx the HWACG must be disabled, so that the IP clock is not gated automatically); this is done using USI_OPTION register 4. Keep both USI clocks (PCLK and IPCLK) running during USI registers modification This driver implements the above behavior. Of course, USIv2 driver should be probed before UART/I2C/SPI drivers. It can be achieved by embedding UART/I2C/SPI nodes inside of the USI node (in Device Tree); driver then walks underlying nodes and instantiates those. Driver also handles USI configuration on PM resume, as register contents can be lost during CPU suspend. This driver is designed with different USI versions in mind. So it should be relatively easy to add new USI revisions to it later. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211204195757.8600-3-semen.protsenko@linaro.org Tested-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-05 03:57:54 +08:00
obj-$(CONFIG_EXYNOS_USI) += exynos-usi.o
soc: samsung: Do not build ARMv7 PMU drivers on ARMv8 The Exynos Power Management Unit (PMU) drivers contain quite large static arrays of register values necessary for given Exynos SoC to enter low power mode. All this data is useless for ARMv8 SoC like Exynos5433, because the image will not be shared between ARMv7 and ARMv8. Add additional Kconfig symbol for selecting the SoC-specific driver addons thus skipping the useless data in the final image (this is similar approach to chosen for Exynos clock controller drivers): - exynos-pmu driver will be compiled on both architectures ARMv7 and ARMv8, - additional driver_data for ARMv7 SoCs will not be built on ARMv8 and a macro will return NULL for them in of_device_id - this should be safe as these compatibles cannot match on ARMv7 and driver anyway handles NULL driver_data, - on ARMv8 compile only exynos-pmu driver which exposes the syscon-regmap for PMU address space. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2017-03-15 01:10:27 +08:00
obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
drivers: soc: Add support for Exynos PMU driver This patch moves Exynos PMU driver implementation from "arm/mach-exynos" to "drivers/soc/samsung". This driver is mainly used for setting misc bits of register from PMU IP of Exynos SoC which will be required to configure before Suspend/Resume. Currently all these settings are done in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC support, there is a need of this PMU driver in driver/* folder. This driver uses existing DT binding information and there should be no functionality change in the supported platforms. Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com> [tested on Peach-Pi (Exynos5880)] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)] Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [k.kozlowski: Rebased, add necessary infrastructure for building and selecting drivers/soc because original patchset was on top of movement SROMc to drivers/soc] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-18 11:32:16 +08:00
exynos5250-pmu.o exynos5420-pmu.o
soc: samsung: pm_domains: Enable COMPILE_TEST for build coverage Introduce a platform selectable symbol EXYNOS_PM_DOMAINS which can be also toggled on by COMPILE_TEST for some build coverage. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-10 22:31:26 +08:00
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
soc: samsung: exynos-regulator-coupler: Add simple voltage coupler for Exynos5800 Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which require coupling between "vdd_arm" and "vdd_int" regulators. This coupler ensures that the voltage values don't go below the bootloader-selected operation point during the boot process until the clients set their constraints. It is achieved by assuming minimal voltage value equal to the current value if no constraints are set. This also ensures proper voltage balancing if any of the client driver is missing. The balancing code comes from the regulator/core.c with the additional logic for handling regulators without client constraints applied added. Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22 02:09:00 +08:00
obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
ARM: samsung: move pm check code to drivers/soc This is the only part of plat-samsung that is really shared between the s3c and s5p ports. Moving it to drivers/soc/ lets us make them completely independent. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200806182059.2431-16-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-07 02:20:33 +08:00
obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o