UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/chipidea/Kconfig

46 lines
1.1 KiB
Plaintext
Raw Normal View History

USB: add missing SPDX lines to Kconfig and Makefiles There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17 16:23:50 +08:00
# SPDX-License-Identifier: GPL-2.0
usb: move ci13xxx and related code to drivers/usb/chipidea Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:45 +08:00
config USB_CHIPIDEA
tristate "ChipIdea Highspeed Dual Role Controller"
usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `dma_set_coherent_mask': include/linux/dma-mapping.h:93: undefined reference to `dma_supported' Reviewed-and-tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17 12:37:25 +08:00
depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
usb: chipidea: Use extcon framework for VBUS and ID detect On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-07 19:45:25 +08:00
select EXTCON
usb: chipidea: msm: Add reset controller for PHY POR bit The MSM chipidea wrapper has two bits that are used to reset the first or second phy. Add support for these bits via the reset controller framework, so that phy drivers can reset their hardware at the right time during initialization. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-12-29 06:57:05 +08:00
select RESET_CONTROLLER
usb: chipidea: Always build ULPI code Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-07-04 21:09:58 +08:00
select USB_ULPI_BUS
usb: chipidea: add role switch class support USB role is fully controlled by usb role switch consumer(e.g. typec), usb port can be at host mode(USB_ROLE_HOST), device mode connected to host(USB_ROLE_DEVICE), or not connecting any partner(USB_ROLE_NONE). Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-08-26 18:25:12 +08:00
select USB_ROLE_SWITCH
usb: move ci13xxx and related code to drivers/usb/chipidea Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:45 +08:00
help
usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Since commit "5e0aa49 usb: chipidea: use generic map/unmap routines", the udc part of the chipidea driver needs the generic usb gadget helper functions. If the chipidea driver with udc support is built into the kernel and usb gadget is built a module, the linking of the kernel fails with: drivers/built-in.o: In function `_hardware_dequeue': drivers/usb/chipidea/udc.c:527: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1269: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1821: undefined reference to `usb_del_gadget_udc' drivers/usb/chipidea/udc.c:443: undefined reference to `usb_gadget_map_request' drivers/usb/chipidea/udc.c:1774: undefined reference to `usb_add_gadget_udc' This patch changes the dependencies, so that udc support can only be activated if the linux gadget support (USB_GADGET) is builtin or both chipidea driver and USB_GADGET are modular. Same dependencies for the chipidea host support and the linux host side USB support (USB). While there, fix the indention of chipidea the help text. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-20 15:33:45 +08:00
Say Y here if your system has a dual role high speed USB
usb: chipidea: Kconfig: improve Kconfig help text Chipidea driver has been updated a lot, and more functions are supported, update Kconfig help text accordingly. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-06-16 15:41:40 +08:00
controller based on ChipIdea silicon IP. It supports:
Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
Peripheral-only.
usb: move ci13xxx and related code to drivers/usb/chipidea Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:45 +08:00
usb: chipidea: fix trivial typo in Kconfig This patch fixes a trivial typo to get the module name ci_hdrc.ko correct. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-10-24 18:15:50 +08:00
When compiled dynamically, the module will be called ci_hdrc.ko.
usb: chipidea: split the driver code into units Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:46 +08:00
if USB_CHIPIDEA
chipidea: introduce specific Kconfig options for glue drivers This patch introduces USB_CHIPIDEA_PCI and USB_CHIPIDEA_OF Kconfig options, one per each specific glue driver. This is needed to provide different dependencies they have. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-20 16:28:07 +08:00
config USB_CHIPIDEA_OF
tristate
depends on OF
default USB_CHIPIDEA
config USB_CHIPIDEA_PCI
tristate
usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-25 19:20:55 +08:00
depends on USB_PCI
chipidea: pci: make it depends on NOP_USB_XCEIV After commit ba1aff67f99a (chipidea: pci: register nop PHY) the PCI glue driver requires nop-PHY to be selected. Thus, make it an explicit dependency. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: ba1aff67f99a (chipidea: pci: register nop PHY) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-20 16:28:08 +08:00
depends on NOP_USB_XCEIV
chipidea: introduce specific Kconfig options for glue drivers This patch introduces USB_CHIPIDEA_PCI and USB_CHIPIDEA_OF Kconfig options, one per each specific glue driver. This is needed to provide different dependencies they have. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-20 16:28:07 +08:00
default USB_CHIPIDEA
usb: chipidea: split the driver code into units Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:46 +08:00
config USB_CHIPIDEA_UDC
bool "ChipIdea device controller"
usb: chipidea: improve kconfig 2.0 This patch provides a cleaner solution to the problem described in commit 20a677fd ("usb: chipidea: improve kconfig"). The goal to be achieved is to force USB_CHIPIDEA=m if either USB_EHCI_HCD=m or USB_GADGET=m. If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'. The old patch had the drawback, that USB_CHIPIDEA could be chosen as 'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from the config options producing a compilable but dysfunctional driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 17:43:58 +08:00
depends on USB_GADGET
usb: chipidea: split the driver code into units Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:46 +08:00
help
Say Y here to enable device controller functionality of the
ChipIdea driver.
usb: chipidea: add host role This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:54 +08:00
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
usb: chipidea: improve kconfig 2.0 This patch provides a cleaner solution to the problem described in commit 20a677fd ("usb: chipidea: improve kconfig"). The goal to be achieved is to force USB_CHIPIDEA=m if either USB_EHCI_HCD=m or USB_GADGET=m. If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'. The old patch had the drawback, that USB_CHIPIDEA could be chosen as 'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from the config options producing a compilable but dysfunctional driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 17:43:58 +08:00
depends on USB_EHCI_HCD
usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig ci13xxx host needs Root Hub Transaction Translators. Reported-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-07 22:56:43 +08:00
select USB_EHCI_ROOT_HUB_TT
usb: chipidea: add host role This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:54 +08:00
help
Say Y here to enable host controller functionality of the
ChipIdea driver.
usb: chipidea: split the driver code into units Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 22:25:46 +08:00
endif