OpenCloudOS-Kernel/net/batman-adv/main.c

427 lines
11 KiB
C
Raw Normal View History

/* Copyright (C) 2007-2012 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA
*/
#include "main.h"
#include "sysfs.h"
#include "debugfs.h"
#include "routing.h"
#include "send.h"
#include "originator.h"
#include "soft-interface.h"
#include "icmp_socket.h"
#include "translation-table.h"
#include "hard-interface.h"
#include "gateway_client.h"
#include "bridge_loop_avoidance.h"
#include "vis.h"
#include "hash.h"
#include "bat_algo.h"
/* List manipulations on hardif_list have to be rtnl_lock()'ed,
* list traversals just rcu-locked
*/
struct list_head batadv_hardif_list;
static int (*batadv_rx_handler[256])(struct sk_buff *,
struct batadv_hard_iface *);
char batadv_routing_algo[20] = "BATMAN_IV";
static struct hlist_head batadv_algo_list;
unsigned char batadv_broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct workqueue_struct *batadv_event_workqueue;
static void batadv_recv_handler_init(void);
static int __init batadv_init(void)
{
INIT_LIST_HEAD(&batadv_hardif_list);
INIT_HLIST_HEAD(&batadv_algo_list);
batadv_recv_handler_init();
batadv_iv_init();
batadv_event_workqueue = create_singlethread_workqueue("bat_events");
if (!batadv_event_workqueue)
return -ENOMEM;
batadv_socket_init();
batadv_debugfs_init();
register_netdevice_notifier(&batadv_hard_if_notifier);
pr_info("B.A.T.M.A.N. advanced %s (compatibility version %i) loaded\n",
BATADV_SOURCE_VERSION, BATADV_COMPAT_VERSION);
return 0;
}
static void __exit batadv_exit(void)
{
batadv_debugfs_destroy();
unregister_netdevice_notifier(&batadv_hard_if_notifier);
batadv_hardif_remove_interfaces();
flush_workqueue(batadv_event_workqueue);
destroy_workqueue(batadv_event_workqueue);
batadv_event_workqueue = NULL;
rcu_barrier();
}
int batadv_mesh_init(struct net_device *soft_iface)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
int ret;
spin_lock_init(&bat_priv->forw_bat_list_lock);
spin_lock_init(&bat_priv->forw_bcast_list_lock);
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
spin_lock_init(&bat_priv->tt_changes_list_lock);
spin_lock_init(&bat_priv->tt_req_list_lock);
spin_lock_init(&bat_priv->tt_roam_list_lock);
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
spin_lock_init(&bat_priv->tt_buff_lock);
spin_lock_init(&bat_priv->gw_list_lock);
spin_lock_init(&bat_priv->vis_hash_lock);
spin_lock_init(&bat_priv->vis_list_lock);
INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
INIT_HLIST_HEAD(&bat_priv->gw_list);
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
INIT_LIST_HEAD(&bat_priv->tt_changes_list);
INIT_LIST_HEAD(&bat_priv->tt_req_list);
INIT_LIST_HEAD(&bat_priv->tt_roam_list);
ret = batadv_originator_init(bat_priv);
if (ret < 0)
goto err;
ret = batadv_tt_init(bat_priv);
if (ret < 0)
goto err;
batadv_tt_local_add(soft_iface, soft_iface->dev_addr,
BATADV_NULL_IFINDEX);
ret = batadv_vis_init(bat_priv);
if (ret < 0)
goto err;
ret = batadv_bla_init(bat_priv);
if (ret < 0)
goto err;
atomic_set(&bat_priv->gw_reselect, 0);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_ACTIVE);
return 0;
err:
batadv_mesh_free(soft_iface);
return ret;
}
void batadv_mesh_free(struct net_device *soft_iface)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
batadv_purge_outstanding_packets(bat_priv, NULL);
batadv_vis_quit(bat_priv);
batadv_gw_node_purge(bat_priv);
batadv_originator_free(bat_priv);
batadv_tt_free(bat_priv);
batadv_bla_free(bat_priv);
free_percpu(bat_priv->bat_counters);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
}
void batadv_inc_module_count(void)
{
try_module_get(THIS_MODULE);
}
void batadv_dec_module_count(void)
{
module_put(THIS_MODULE);
}
int batadv_is_my_mac(const uint8_t *addr)
{
const struct batadv_hard_iface *hard_iface;
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->if_status != BATADV_IF_ACTIVE)
continue;
if (batadv_compare_eth(hard_iface->net_dev->dev_addr, addr)) {
rcu_read_unlock();
return 1;
}
}
rcu_read_unlock();
return 0;
}
static int batadv_recv_unhandled_packet(struct sk_buff *skb,
struct batadv_hard_iface *recv_if)
{
return NET_RX_DROP;
}
/* incoming packets with the batman ethertype received on any active hard
* interface
*/
int batadv_batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype,
struct net_device *orig_dev)
{
struct batadv_priv *bat_priv;
struct batadv_ogm_packet *batadv_ogm_packet;
struct batadv_hard_iface *hard_iface;
uint8_t idx;
int ret;
hard_iface = container_of(ptype, struct batadv_hard_iface,
batman_adv_ptype);
skb = skb_share_check(skb, GFP_ATOMIC);
/* skb was released by skb_share_check() */
if (!skb)
goto err_out;
/* packet should hold at least type and version */
if (unlikely(!pskb_may_pull(skb, 2)))
goto err_free;
/* expect a valid ethernet header here. */
if (unlikely(skb->mac_len != ETH_HLEN || !skb_mac_header(skb)))
goto err_free;
if (!hard_iface->soft_iface)
goto err_free;
bat_priv = netdev_priv(hard_iface->soft_iface);
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto err_free;
/* discard frames on not active interfaces */
if (hard_iface->if_status != BATADV_IF_ACTIVE)
goto err_free;
batadv_ogm_packet = (struct batadv_ogm_packet *)skb->data;
if (batadv_ogm_packet->header.version != BATADV_COMPAT_VERSION) {
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Drop packet: incompatible batman version (%i)\n",
batadv_ogm_packet->header.version);
goto err_free;
}
/* all receive handlers return whether they received or reused
* the supplied skb. if not, we have to free the skb.
*/
idx = batadv_ogm_packet->header.packet_type;
ret = (*batadv_rx_handler[idx])(skb, hard_iface);
if (ret == NET_RX_DROP)
kfree_skb(skb);
/* return NET_RX_SUCCESS in any case as we
* most probably dropped the packet for
* routing-logical reasons.
*/
return NET_RX_SUCCESS;
err_free:
kfree_skb(skb);
err_out:
return NET_RX_DROP;
}
static void batadv_recv_handler_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(batadv_rx_handler); i++)
batadv_rx_handler[i] = batadv_recv_unhandled_packet;
/* batman icmp packet */
batadv_rx_handler[BATADV_ICMP] = batadv_recv_icmp_packet;
/* unicast packet */
batadv_rx_handler[BATADV_UNICAST] = batadv_recv_unicast_packet;
/* fragmented unicast packet */
batadv_rx_handler[BATADV_UNICAST_FRAG] = batadv_recv_ucast_frag_packet;
/* broadcast packet */
batadv_rx_handler[BATADV_BCAST] = batadv_recv_bcast_packet;
/* vis packet */
batadv_rx_handler[BATADV_VIS] = batadv_recv_vis_packet;
/* Translation table query (request or response) */
batadv_rx_handler[BATADV_TT_QUERY] = batadv_recv_tt_query;
/* Roaming advertisement */
batadv_rx_handler[BATADV_ROAM_ADV] = batadv_recv_roam_adv;
}
int
batadv_recv_handler_register(uint8_t packet_type,
int (*recv_handler)(struct sk_buff *,
struct batadv_hard_iface *))
{
if (batadv_rx_handler[packet_type] != &batadv_recv_unhandled_packet)
return -EBUSY;
batadv_rx_handler[packet_type] = recv_handler;
return 0;
}
void batadv_recv_handler_unregister(uint8_t packet_type)
{
batadv_rx_handler[packet_type] = batadv_recv_unhandled_packet;
}
static struct batadv_algo_ops *batadv_algo_get(char *name)
{
struct batadv_algo_ops *bat_algo_ops = NULL, *bat_algo_ops_tmp;
struct hlist_node *node;
hlist_for_each_entry(bat_algo_ops_tmp, node, &batadv_algo_list, list) {
if (strcmp(bat_algo_ops_tmp->name, name) != 0)
continue;
bat_algo_ops = bat_algo_ops_tmp;
break;
}
return bat_algo_ops;
}
int batadv_algo_register(struct batadv_algo_ops *bat_algo_ops)
{
struct batadv_algo_ops *bat_algo_ops_tmp;
int ret;
bat_algo_ops_tmp = batadv_algo_get(bat_algo_ops->name);
if (bat_algo_ops_tmp) {
pr_info("Trying to register already registered routing algorithm: %s\n",
bat_algo_ops->name);
ret = -EEXIST;
goto out;
}
/* all algorithms must implement all ops (for now) */
if (!bat_algo_ops->bat_iface_enable ||
!bat_algo_ops->bat_iface_disable ||
!bat_algo_ops->bat_iface_update_mac ||
!bat_algo_ops->bat_primary_iface_set ||
!bat_algo_ops->bat_ogm_schedule ||
!bat_algo_ops->bat_ogm_emit) {
pr_info("Routing algo '%s' does not implement required ops\n",
bat_algo_ops->name);
ret = -EINVAL;
goto out;
}
INIT_HLIST_NODE(&bat_algo_ops->list);
hlist_add_head(&bat_algo_ops->list, &batadv_algo_list);
ret = 0;
out:
return ret;
}
int batadv_algo_select(struct batadv_priv *bat_priv, char *name)
{
struct batadv_algo_ops *bat_algo_ops;
int ret = -EINVAL;
bat_algo_ops = batadv_algo_get(name);
if (!bat_algo_ops)
goto out;
bat_priv->bat_algo_ops = bat_algo_ops;
ret = 0;
out:
return ret;
}
int batadv_algo_seq_print_text(struct seq_file *seq, void *offset)
{
struct batadv_algo_ops *bat_algo_ops;
struct hlist_node *node;
seq_printf(seq, "Available routing algorithms:\n");
hlist_for_each_entry(bat_algo_ops, node, &batadv_algo_list, list) {
seq_printf(seq, "%s\n", bat_algo_ops->name);
}
return 0;
}
static int batadv_param_set_ra(const char *val, const struct kernel_param *kp)
{
struct batadv_algo_ops *bat_algo_ops;
char *algo_name = (char *)val;
size_t name_len = strlen(algo_name);
if (algo_name[name_len - 1] == '\n')
algo_name[name_len - 1] = '\0';
bat_algo_ops = batadv_algo_get(algo_name);
if (!bat_algo_ops) {
pr_err("Routing algorithm '%s' is not supported\n", algo_name);
return -EINVAL;
}
return param_set_copystring(algo_name, kp);
}
static const struct kernel_param_ops batadv_param_ops_ra = {
.set = batadv_param_set_ra,
.get = param_get_string,
};
static struct kparam_string batadv_param_string_ra = {
.maxlen = sizeof(batadv_routing_algo),
.string = batadv_routing_algo,
};
module_param_cb(routing_algo, &batadv_param_ops_ra, &batadv_param_string_ra,
0644);
module_init(batadv_init);
module_exit(batadv_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR(BATADV_DRIVER_AUTHOR);
MODULE_DESCRIPTION(BATADV_DRIVER_DESC);
MODULE_SUPPORTED_DEVICE(BATADV_DRIVER_DEVICE);
MODULE_VERSION(BATADV_SOURCE_VERSION);