2009-03-05 03:59:29 +08:00
|
|
|
/*
|
|
|
|
|
* leds-bd2802.c - RGB LED Driver
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2009 Samsung Electronics
|
|
|
|
|
* Kim Kyuwon <q1.kim@samsung.com>
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
*
|
|
|
|
|
* Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/leds.h>
|
|
|
|
|
#include <linux/leds-bd2802.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
2011-03-23 07:30:14 +08:00
|
|
|
#include <linux/pm.h>
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
|
|
|
|
|
|
|
|
|
|
#define BD2802_LED_OFFSET 0xa
|
|
|
|
|
#define BD2802_COLOR_OFFSET 0x3
|
|
|
|
|
|
2012-11-25 13:39:52 +08:00
|
|
|
#define BD2802_REG_CLKSETUP 0x00
|
|
|
|
|
#define BD2802_REG_CONTROL 0x01
|
2009-03-05 03:59:29 +08:00
|
|
|
#define BD2802_REG_HOURSETUP 0x02
|
|
|
|
|
#define BD2802_REG_CURRENT1SETUP 0x03
|
|
|
|
|
#define BD2802_REG_CURRENT2SETUP 0x04
|
|
|
|
|
#define BD2802_REG_WAVEPATTERN 0x05
|
|
|
|
|
|
|
|
|
|
#define BD2802_CURRENT_032 0x10 /* 3.2mA */
|
|
|
|
|
#define BD2802_CURRENT_000 0x00 /* 0.0mA */
|
|
|
|
|
|
|
|
|
|
#define BD2802_PATTERN_FULL 0x07
|
|
|
|
|
#define BD2802_PATTERN_HALF 0x03
|
|
|
|
|
|
|
|
|
|
enum led_ids {
|
|
|
|
|
LED1,
|
|
|
|
|
LED2,
|
|
|
|
|
LED_NUM,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum led_colors {
|
|
|
|
|
RED,
|
|
|
|
|
GREEN,
|
|
|
|
|
BLUE,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum led_bits {
|
|
|
|
|
BD2802_OFF,
|
|
|
|
|
BD2802_BLINK,
|
|
|
|
|
BD2802_ON,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* State '0' : 'off'
|
|
|
|
|
* State '1' : 'blink'
|
|
|
|
|
* State '2' : 'on'.
|
|
|
|
|
*/
|
|
|
|
|
struct led_state {
|
|
|
|
|
unsigned r:2;
|
|
|
|
|
unsigned g:2;
|
|
|
|
|
unsigned b:2;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct bd2802_led {
|
|
|
|
|
struct bd2802_led_platform_data *pdata;
|
|
|
|
|
struct i2c_client *client;
|
|
|
|
|
struct rw_semaphore rwsem;
|
|
|
|
|
struct work_struct work;
|
|
|
|
|
|
|
|
|
|
struct led_state led[2];
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Making led_classdev as array is not recommended, because array
|
|
|
|
|
* members prevent using 'container_of' macro. So repetitive works
|
|
|
|
|
* are needed.
|
|
|
|
|
*/
|
|
|
|
|
struct led_classdev cdev_led1r;
|
|
|
|
|
struct led_classdev cdev_led1g;
|
|
|
|
|
struct led_classdev cdev_led1b;
|
|
|
|
|
struct led_classdev cdev_led2r;
|
|
|
|
|
struct led_classdev cdev_led2g;
|
|
|
|
|
struct led_classdev cdev_led2b;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Advanced Configuration Function(ADF) mode:
|
|
|
|
|
* In ADF mode, user can set registers of BD2802GU directly,
|
|
|
|
|
* therefore BD2802GU doesn't enter reset state.
|
|
|
|
|
*/
|
2012-11-25 13:39:52 +08:00
|
|
|
int adf_on;
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
enum led_ids led_id;
|
|
|
|
|
enum led_colors color;
|
|
|
|
|
enum led_bits state;
|
2009-06-11 03:48:50 +08:00
|
|
|
|
|
|
|
|
/* General attributes of RGB LEDs */
|
|
|
|
|
int wave_pattern;
|
|
|
|
|
int rgb_current;
|
2009-03-05 03:59:29 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
/* BD2802GU helper functions */
|
|
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
|
|
|
|
|
static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color)
|
|
|
|
|
{
|
|
|
|
|
switch (color) {
|
|
|
|
|
case RED:
|
|
|
|
|
return !led->led[id].r;
|
|
|
|
|
case GREEN:
|
|
|
|
|
return !led->led[id].g;
|
|
|
|
|
case BLUE:
|
|
|
|
|
return !led->led[id].b;
|
|
|
|
|
default:
|
|
|
|
|
dev_err(&led->client->dev, "%s: Invalid color\n", __func__);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id)
|
|
|
|
|
{
|
|
|
|
|
if (led->led[id].r || led->led[id].g || led->led[id].b)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int bd2802_is_all_off(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < LED_NUM; i++)
|
|
|
|
|
if (!bd2802_is_led_off(led, i))
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color)
|
|
|
|
|
{
|
|
|
|
|
return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color,
|
|
|
|
|
u8 reg_offset)
|
|
|
|
|
{
|
|
|
|
|
return reg_offset + bd2802_get_base_offset(id, color);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
/* BD2802GU core functions */
|
|
|
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
|
|
|
|
|
static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val)
|
|
|
|
|
{
|
|
|
|
|
int ret = i2c_smbus_write_byte_data(client, reg, val);
|
|
|
|
|
if (ret >= 0)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
|
|
|
|
|
__func__, reg, val, ret);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color, enum led_bits led_bit)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
u8 value;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < LED_NUM; i++) {
|
|
|
|
|
if (i == id) {
|
|
|
|
|
switch (color) {
|
|
|
|
|
case RED:
|
|
|
|
|
led->led[i].r = led_bit;
|
|
|
|
|
break;
|
|
|
|
|
case GREEN:
|
|
|
|
|
led->led[i].g = led_bit;
|
|
|
|
|
break;
|
|
|
|
|
case BLUE:
|
|
|
|
|
led->led[i].b = led_bit;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
dev_err(&led->client->dev,
|
|
|
|
|
"%s: Invalid color\n", __func__);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (led_bit == BD2802_BLINK || led_bit == BD2802_ON)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
if (!bd2802_is_led_off(led, id))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_all_off(led) && !led->adf_on) {
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 0);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* In this case, other led is turned on, and current led is turned
|
|
|
|
|
* off. So set RGB LED Control register to stop the current RGB LED
|
|
|
|
|
*/
|
|
|
|
|
value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1);
|
|
|
|
|
bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_configure(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
struct bd2802_led_platform_data *pdata = led->pdata;
|
|
|
|
|
u8 reg;
|
|
|
|
|
|
|
|
|
|
reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, pdata->rgb_time);
|
|
|
|
|
|
|
|
|
|
reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, pdata->rgb_time);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_reset_cancel(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 1);
|
|
|
|
|
udelay(100);
|
|
|
|
|
bd2802_configure(led);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_enable(struct bd2802_led *led, enum led_ids id)
|
|
|
|
|
{
|
|
|
|
|
enum led_ids other_led = (id == LED1) ? LED2 : LED1;
|
|
|
|
|
u8 value, other_led_on;
|
|
|
|
|
|
|
|
|
|
other_led_on = !bd2802_is_led_off(led, other_led);
|
|
|
|
|
if (id == LED1)
|
|
|
|
|
value = LED_CTL(other_led_on, 1);
|
|
|
|
|
else
|
|
|
|
|
value = LED_CTL(1 , other_led_on);
|
|
|
|
|
|
|
|
|
|
bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color)
|
|
|
|
|
{
|
|
|
|
|
u8 reg;
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_all_off(led) && !led->adf_on)
|
|
|
|
|
bd2802_reset_cancel(led);
|
|
|
|
|
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
|
2009-06-11 03:48:50 +08:00
|
|
|
bd2802_write_byte(led->client, reg, led->rgb_current);
|
2009-03-05 03:59:29 +08:00
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
|
|
|
|
|
bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL);
|
|
|
|
|
|
|
|
|
|
bd2802_enable(led, id);
|
|
|
|
|
bd2802_update_state(led, id, color, BD2802_ON);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color)
|
|
|
|
|
{
|
|
|
|
|
u8 reg;
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_all_off(led) && !led->adf_on)
|
|
|
|
|
bd2802_reset_cancel(led);
|
|
|
|
|
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
|
2009-06-11 03:48:50 +08:00
|
|
|
bd2802_write_byte(led->client, reg, led->rgb_current);
|
2009-03-05 03:59:29 +08:00
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
|
2009-06-11 03:48:50 +08:00
|
|
|
bd2802_write_byte(led->client, reg, led->wave_pattern);
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
bd2802_enable(led, id);
|
|
|
|
|
bd2802_update_state(led, id, color, BD2802_BLINK);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color, enum led_bits led_bit)
|
|
|
|
|
{
|
|
|
|
|
if (led_bit == BD2802_OFF) {
|
|
|
|
|
dev_err(&led->client->dev,
|
|
|
|
|
"Only 'blink' and 'on' are allowed\n");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (led_bit == BD2802_BLINK)
|
|
|
|
|
bd2802_set_blink(led, id, color);
|
|
|
|
|
else
|
|
|
|
|
bd2802_set_on(led, id, color);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id,
|
|
|
|
|
enum led_colors color)
|
|
|
|
|
{
|
|
|
|
|
u8 reg;
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_rgb_off(led, id, color))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
|
|
|
|
|
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
|
|
|
|
|
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
|
|
|
|
|
|
|
|
|
|
bd2802_update_state(led, id, color, BD2802_OFF);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define BD2802_SET_REGISTER(reg_addr, reg_name) \
|
|
|
|
|
static ssize_t bd2802_store_reg##reg_addr(struct device *dev, \
|
|
|
|
|
struct device_attribute *attr, const char *buf, size_t count) \
|
|
|
|
|
{ \
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
|
|
|
|
|
unsigned long val; \
|
|
|
|
|
int ret; \
|
|
|
|
|
if (!count) \
|
|
|
|
|
return -EINVAL; \
|
2012-10-23 20:23:33 +08:00
|
|
|
ret = kstrtoul(buf, 16, &val); \
|
2009-03-05 03:59:29 +08:00
|
|
|
if (ret) \
|
|
|
|
|
return ret; \
|
|
|
|
|
down_write(&led->rwsem); \
|
|
|
|
|
bd2802_write_byte(led->client, reg_addr, (u8) val); \
|
|
|
|
|
up_write(&led->rwsem); \
|
|
|
|
|
return count; \
|
|
|
|
|
} \
|
|
|
|
|
static struct device_attribute bd2802_reg##reg_addr##_attr = { \
|
2010-07-29 13:09:23 +08:00
|
|
|
.attr = {.name = reg_name, .mode = 0644}, \
|
2009-03-05 03:59:29 +08:00
|
|
|
.store = bd2802_store_reg##reg_addr, \
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
BD2802_SET_REGISTER(0x00, "0x00");
|
|
|
|
|
BD2802_SET_REGISTER(0x01, "0x01");
|
|
|
|
|
BD2802_SET_REGISTER(0x02, "0x02");
|
|
|
|
|
BD2802_SET_REGISTER(0x03, "0x03");
|
|
|
|
|
BD2802_SET_REGISTER(0x04, "0x04");
|
|
|
|
|
BD2802_SET_REGISTER(0x05, "0x05");
|
|
|
|
|
BD2802_SET_REGISTER(0x06, "0x06");
|
|
|
|
|
BD2802_SET_REGISTER(0x07, "0x07");
|
|
|
|
|
BD2802_SET_REGISTER(0x08, "0x08");
|
|
|
|
|
BD2802_SET_REGISTER(0x09, "0x09");
|
|
|
|
|
BD2802_SET_REGISTER(0x0a, "0x0a");
|
|
|
|
|
BD2802_SET_REGISTER(0x0b, "0x0b");
|
|
|
|
|
BD2802_SET_REGISTER(0x0c, "0x0c");
|
|
|
|
|
BD2802_SET_REGISTER(0x0d, "0x0d");
|
|
|
|
|
BD2802_SET_REGISTER(0x0e, "0x0e");
|
|
|
|
|
BD2802_SET_REGISTER(0x0f, "0x0f");
|
|
|
|
|
BD2802_SET_REGISTER(0x10, "0x10");
|
|
|
|
|
BD2802_SET_REGISTER(0x11, "0x11");
|
|
|
|
|
BD2802_SET_REGISTER(0x12, "0x12");
|
|
|
|
|
BD2802_SET_REGISTER(0x13, "0x13");
|
|
|
|
|
BD2802_SET_REGISTER(0x14, "0x14");
|
|
|
|
|
BD2802_SET_REGISTER(0x15, "0x15");
|
|
|
|
|
|
|
|
|
|
static struct device_attribute *bd2802_addr_attributes[] = {
|
|
|
|
|
&bd2802_reg0x00_attr,
|
|
|
|
|
&bd2802_reg0x01_attr,
|
|
|
|
|
&bd2802_reg0x02_attr,
|
|
|
|
|
&bd2802_reg0x03_attr,
|
|
|
|
|
&bd2802_reg0x04_attr,
|
|
|
|
|
&bd2802_reg0x05_attr,
|
|
|
|
|
&bd2802_reg0x06_attr,
|
|
|
|
|
&bd2802_reg0x07_attr,
|
|
|
|
|
&bd2802_reg0x08_attr,
|
|
|
|
|
&bd2802_reg0x09_attr,
|
|
|
|
|
&bd2802_reg0x0a_attr,
|
|
|
|
|
&bd2802_reg0x0b_attr,
|
|
|
|
|
&bd2802_reg0x0c_attr,
|
|
|
|
|
&bd2802_reg0x0d_attr,
|
|
|
|
|
&bd2802_reg0x0e_attr,
|
|
|
|
|
&bd2802_reg0x0f_attr,
|
|
|
|
|
&bd2802_reg0x10_attr,
|
|
|
|
|
&bd2802_reg0x11_attr,
|
|
|
|
|
&bd2802_reg0x12_attr,
|
|
|
|
|
&bd2802_reg0x13_attr,
|
|
|
|
|
&bd2802_reg0x14_attr,
|
|
|
|
|
&bd2802_reg0x15_attr,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void bd2802_enable_adv_conf(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) {
|
|
|
|
|
ret = device_create_file(&led->client->dev,
|
|
|
|
|
bd2802_addr_attributes[i]);
|
|
|
|
|
if (ret) {
|
2009-06-11 03:48:50 +08:00
|
|
|
dev_err(&led->client->dev, "failed: sysfs file %s\n",
|
2009-03-05 03:59:29 +08:00
|
|
|
bd2802_addr_attributes[i]->attr.name);
|
|
|
|
|
goto failed_remove_files;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_all_off(led))
|
|
|
|
|
bd2802_reset_cancel(led);
|
|
|
|
|
|
|
|
|
|
led->adf_on = 1;
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
failed_remove_files:
|
|
|
|
|
for (i--; i >= 0; i--)
|
|
|
|
|
device_remove_file(&led->client->dev,
|
|
|
|
|
bd2802_addr_attributes[i]);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_disable_adv_conf(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++)
|
|
|
|
|
device_remove_file(&led->client->dev,
|
|
|
|
|
bd2802_addr_attributes[i]);
|
|
|
|
|
|
|
|
|
|
if (bd2802_is_all_off(led))
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 0);
|
|
|
|
|
|
|
|
|
|
led->adf_on = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static ssize_t bd2802_show_adv_conf(struct device *dev,
|
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
|
{
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
|
|
down_read(&led->rwsem);
|
|
|
|
|
if (led->adf_on)
|
|
|
|
|
ret = sprintf(buf, "on\n");
|
|
|
|
|
else
|
|
|
|
|
ret = sprintf(buf, "off\n");
|
|
|
|
|
up_read(&led->rwsem);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static ssize_t bd2802_store_adv_conf(struct device *dev,
|
|
|
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
|
|
|
{
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
|
|
|
|
|
|
if (!count)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
down_write(&led->rwsem);
|
|
|
|
|
if (!led->adf_on && !strncmp(buf, "on", 2))
|
|
|
|
|
bd2802_enable_adv_conf(led);
|
|
|
|
|
else if (led->adf_on && !strncmp(buf, "off", 3))
|
|
|
|
|
bd2802_disable_adv_conf(led);
|
|
|
|
|
up_write(&led->rwsem);
|
|
|
|
|
|
|
|
|
|
return count;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct device_attribute bd2802_adv_conf_attr = {
|
|
|
|
|
.attr = {
|
|
|
|
|
.name = "advanced_configuration",
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
},
|
|
|
|
|
.show = bd2802_show_adv_conf,
|
|
|
|
|
.store = bd2802_store_adv_conf,
|
|
|
|
|
};
|
|
|
|
|
|
2009-06-11 03:48:50 +08:00
|
|
|
#define BD2802_CONTROL_ATTR(attr_name, name_str) \
|
|
|
|
|
static ssize_t bd2802_show_##attr_name(struct device *dev, \
|
|
|
|
|
struct device_attribute *attr, char *buf) \
|
|
|
|
|
{ \
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
|
|
|
|
|
ssize_t ret; \
|
|
|
|
|
down_read(&led->rwsem); \
|
|
|
|
|
ret = sprintf(buf, "0x%02x\n", led->attr_name); \
|
|
|
|
|
up_read(&led->rwsem); \
|
|
|
|
|
return ret; \
|
|
|
|
|
} \
|
|
|
|
|
static ssize_t bd2802_store_##attr_name(struct device *dev, \
|
|
|
|
|
struct device_attribute *attr, const char *buf, size_t count) \
|
|
|
|
|
{ \
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
|
|
|
|
|
unsigned long val; \
|
|
|
|
|
int ret; \
|
|
|
|
|
if (!count) \
|
|
|
|
|
return -EINVAL; \
|
2012-10-23 20:23:33 +08:00
|
|
|
ret = kstrtoul(buf, 16, &val); \
|
2009-06-11 03:48:50 +08:00
|
|
|
if (ret) \
|
|
|
|
|
return ret; \
|
|
|
|
|
down_write(&led->rwsem); \
|
|
|
|
|
led->attr_name = val; \
|
|
|
|
|
up_write(&led->rwsem); \
|
|
|
|
|
return count; \
|
|
|
|
|
} \
|
|
|
|
|
static struct device_attribute bd2802_##attr_name##_attr = { \
|
|
|
|
|
.attr = { \
|
|
|
|
|
.name = name_str, \
|
|
|
|
|
.mode = 0644, \
|
|
|
|
|
}, \
|
|
|
|
|
.show = bd2802_show_##attr_name, \
|
|
|
|
|
.store = bd2802_store_##attr_name, \
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
|
|
|
|
|
BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
|
|
|
|
|
|
|
|
|
|
static struct device_attribute *bd2802_attributes[] = {
|
|
|
|
|
&bd2802_adv_conf_attr,
|
|
|
|
|
&bd2802_wave_pattern_attr,
|
|
|
|
|
&bd2802_rgb_current_attr,
|
|
|
|
|
};
|
|
|
|
|
|
2009-03-05 03:59:29 +08:00
|
|
|
static void bd2802_led_work(struct work_struct *work)
|
|
|
|
|
{
|
|
|
|
|
struct bd2802_led *led = container_of(work, struct bd2802_led, work);
|
|
|
|
|
|
|
|
|
|
if (led->state)
|
|
|
|
|
bd2802_turn_on(led, led->led_id, led->color, led->state);
|
|
|
|
|
else
|
|
|
|
|
bd2802_turn_off(led, led->led_id, led->color);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define BD2802_CONTROL_RGBS(name, id, clr) \
|
|
|
|
|
static void bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\
|
|
|
|
|
enum led_brightness value) \
|
|
|
|
|
{ \
|
|
|
|
|
struct bd2802_led *led = \
|
|
|
|
|
container_of(led_cdev, struct bd2802_led, cdev_##name); \
|
|
|
|
|
led->led_id = id; \
|
|
|
|
|
led->color = clr; \
|
|
|
|
|
if (value == LED_OFF) \
|
|
|
|
|
led->state = BD2802_OFF; \
|
|
|
|
|
else \
|
|
|
|
|
led->state = BD2802_ON; \
|
|
|
|
|
schedule_work(&led->work); \
|
|
|
|
|
} \
|
|
|
|
|
static int bd2802_set_##name##_blink(struct led_classdev *led_cdev, \
|
|
|
|
|
unsigned long *delay_on, unsigned long *delay_off) \
|
|
|
|
|
{ \
|
|
|
|
|
struct bd2802_led *led = \
|
|
|
|
|
container_of(led_cdev, struct bd2802_led, cdev_##name); \
|
|
|
|
|
if (*delay_on == 0 || *delay_off == 0) \
|
|
|
|
|
return -EINVAL; \
|
|
|
|
|
led->led_id = id; \
|
|
|
|
|
led->color = clr; \
|
|
|
|
|
led->state = BD2802_BLINK; \
|
|
|
|
|
schedule_work(&led->work); \
|
|
|
|
|
return 0; \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
BD2802_CONTROL_RGBS(led1r, LED1, RED);
|
|
|
|
|
BD2802_CONTROL_RGBS(led1g, LED1, GREEN);
|
|
|
|
|
BD2802_CONTROL_RGBS(led1b, LED1, BLUE);
|
|
|
|
|
BD2802_CONTROL_RGBS(led2r, LED2, RED);
|
|
|
|
|
BD2802_CONTROL_RGBS(led2g, LED2, GREEN);
|
|
|
|
|
BD2802_CONTROL_RGBS(led2b, LED2, BLUE);
|
|
|
|
|
|
|
|
|
|
static int bd2802_register_led_classdev(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
INIT_WORK(&led->work, bd2802_led_work);
|
|
|
|
|
|
|
|
|
|
led->cdev_led1r.name = "led1_R";
|
|
|
|
|
led->cdev_led1r.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
|
|
|
|
|
led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led1r.name);
|
|
|
|
|
goto failed_unregister_led1_R;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
led->cdev_led1g.name = "led1_G";
|
|
|
|
|
led->cdev_led1g.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
|
|
|
|
|
led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led1g.name);
|
|
|
|
|
goto failed_unregister_led1_G;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
led->cdev_led1b.name = "led1_B";
|
|
|
|
|
led->cdev_led1b.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
|
|
|
|
|
led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led1b.name);
|
|
|
|
|
goto failed_unregister_led1_B;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
led->cdev_led2r.name = "led2_R";
|
|
|
|
|
led->cdev_led2r.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
|
|
|
|
|
led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led2r.name);
|
|
|
|
|
goto failed_unregister_led2_R;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
led->cdev_led2g.name = "led2_G";
|
|
|
|
|
led->cdev_led2g.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
|
|
|
|
|
led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led2g.name);
|
|
|
|
|
goto failed_unregister_led2_G;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
led->cdev_led2b.name = "led2_B";
|
|
|
|
|
led->cdev_led2b.brightness = LED_OFF;
|
|
|
|
|
led->cdev_led2b.brightness_set = bd2802_set_led2b_brightness;
|
|
|
|
|
led->cdev_led2b.blink_set = bd2802_set_led2b_blink;
|
|
|
|
|
led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME;
|
|
|
|
|
|
|
|
|
|
ret = led_classdev_register(&led->client->dev, &led->cdev_led2b);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&led->client->dev, "couldn't register LED %s\n",
|
|
|
|
|
led->cdev_led2b.name);
|
|
|
|
|
goto failed_unregister_led2_B;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
failed_unregister_led2_B:
|
|
|
|
|
led_classdev_unregister(&led->cdev_led2g);
|
|
|
|
|
failed_unregister_led2_G:
|
|
|
|
|
led_classdev_unregister(&led->cdev_led2r);
|
|
|
|
|
failed_unregister_led2_R:
|
|
|
|
|
led_classdev_unregister(&led->cdev_led1b);
|
|
|
|
|
failed_unregister_led1_B:
|
|
|
|
|
led_classdev_unregister(&led->cdev_led1g);
|
|
|
|
|
failed_unregister_led1_G:
|
|
|
|
|
led_classdev_unregister(&led->cdev_led1r);
|
|
|
|
|
failed_unregister_led1_R:
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void bd2802_unregister_led_classdev(struct bd2802_led *led)
|
|
|
|
|
{
|
|
|
|
|
cancel_work_sync(&led->work);
|
2011-08-26 06:59:21 +08:00
|
|
|
led_classdev_unregister(&led->cdev_led2b);
|
|
|
|
|
led_classdev_unregister(&led->cdev_led2g);
|
|
|
|
|
led_classdev_unregister(&led->cdev_led2r);
|
|
|
|
|
led_classdev_unregister(&led->cdev_led1b);
|
|
|
|
|
led_classdev_unregister(&led->cdev_led1g);
|
2009-03-05 03:59:29 +08:00
|
|
|
led_classdev_unregister(&led->cdev_led1r);
|
|
|
|
|
}
|
|
|
|
|
|
2012-11-20 02:23:02 +08:00
|
|
|
static int bd2802_probe(struct i2c_client *client,
|
2009-03-05 03:59:29 +08:00
|
|
|
const struct i2c_device_id *id)
|
|
|
|
|
{
|
|
|
|
|
struct bd2802_led *led;
|
|
|
|
|
struct bd2802_led_platform_data *pdata;
|
2009-06-11 03:48:50 +08:00
|
|
|
int ret, i;
|
2009-03-05 03:59:29 +08:00
|
|
|
|
2012-07-04 11:35:03 +08:00
|
|
|
led = devm_kzalloc(&client->dev, sizeof(struct bd2802_led), GFP_KERNEL);
|
2014-05-08 11:25:52 +08:00
|
|
|
if (!led)
|
2009-03-05 03:59:29 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
|
|
led->client = client;
|
2013-07-30 16:07:35 +08:00
|
|
|
pdata = led->pdata = dev_get_platdata(&client->dev);
|
2009-03-05 03:59:29 +08:00
|
|
|
i2c_set_clientdata(client, led);
|
|
|
|
|
|
|
|
|
|
/* Configure RESET GPIO (L: RESET, H: RESET cancel) */
|
2012-01-11 07:09:35 +08:00
|
|
|
gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
/* Tacss = min 0.1ms */
|
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
|
|
/* Detect BD2802GU */
|
|
|
|
|
ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(&client->dev, "failed to detect device\n");
|
2012-07-04 11:35:03 +08:00
|
|
|
return ret;
|
2009-03-05 03:59:29 +08:00
|
|
|
} else
|
|
|
|
|
dev_info(&client->dev, "return 0x%02x\n", ret);
|
|
|
|
|
|
|
|
|
|
/* To save the power, reset BD2802 after detecting */
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 0);
|
|
|
|
|
|
2009-06-11 03:48:50 +08:00
|
|
|
/* Default attributes */
|
|
|
|
|
led->wave_pattern = BD2802_PATTERN_HALF;
|
|
|
|
|
led->rgb_current = BD2802_CURRENT_032;
|
|
|
|
|
|
2009-03-05 03:59:29 +08:00
|
|
|
init_rwsem(&led->rwsem);
|
|
|
|
|
|
2009-06-11 03:48:50 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
|
|
|
|
|
ret = device_create_file(&led->client->dev,
|
|
|
|
|
bd2802_attributes[i]);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(&led->client->dev, "failed: sysfs file %s\n",
|
|
|
|
|
bd2802_attributes[i]->attr.name);
|
|
|
|
|
goto failed_unregister_dev_file;
|
|
|
|
|
}
|
2009-03-05 03:59:29 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ret = bd2802_register_led_classdev(led);
|
|
|
|
|
if (ret < 0)
|
|
|
|
|
goto failed_unregister_dev_file;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
failed_unregister_dev_file:
|
2009-06-11 03:48:50 +08:00
|
|
|
for (i--; i >= 0; i--)
|
|
|
|
|
device_remove_file(&led->client->dev, bd2802_attributes[i]);
|
2009-03-05 03:59:29 +08:00
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
2013-02-28 11:55:14 +08:00
|
|
|
static int bd2802_remove(struct i2c_client *client)
|
2009-03-05 03:59:29 +08:00
|
|
|
{
|
|
|
|
|
struct bd2802_led *led = i2c_get_clientdata(client);
|
2009-06-11 03:48:50 +08:00
|
|
|
int i;
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 0);
|
2009-06-11 03:48:50 +08:00
|
|
|
bd2802_unregister_led_classdev(led);
|
2009-03-05 03:59:29 +08:00
|
|
|
if (led->adf_on)
|
|
|
|
|
bd2802_disable_adv_conf(led);
|
2009-06-11 03:48:50 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
|
|
|
|
|
device_remove_file(&led->client->dev, bd2802_attributes[i]);
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2013-03-22 10:09:01 +08:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
2011-03-23 07:30:14 +08:00
|
|
|
static void bd2802_restore_state(struct bd2802_led *led)
|
2009-03-05 03:59:29 +08:00
|
|
|
{
|
2011-03-23 07:30:14 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < LED_NUM; i++) {
|
|
|
|
|
if (led->led[i].r)
|
|
|
|
|
bd2802_turn_on(led, i, RED, led->led[i].r);
|
|
|
|
|
if (led->led[i].g)
|
|
|
|
|
bd2802_turn_on(led, i, GREEN, led->led[i].g);
|
|
|
|
|
if (led->led[i].b)
|
|
|
|
|
bd2802_turn_on(led, i, BLUE, led->led[i].b);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int bd2802_suspend(struct device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
2009-03-05 03:59:29 +08:00
|
|
|
struct bd2802_led *led = i2c_get_clientdata(client);
|
|
|
|
|
|
|
|
|
|
gpio_set_value(led->pdata->reset_gpio, 0);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2011-03-23 07:30:14 +08:00
|
|
|
static int bd2802_resume(struct device *dev)
|
2009-03-05 03:59:29 +08:00
|
|
|
{
|
2011-03-23 07:30:14 +08:00
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
2009-03-05 03:59:29 +08:00
|
|
|
struct bd2802_led *led = i2c_get_clientdata(client);
|
|
|
|
|
|
|
|
|
|
if (!bd2802_is_all_off(led) || led->adf_on) {
|
2009-06-11 03:48:48 +08:00
|
|
|
bd2802_reset_cancel(led);
|
2009-03-05 03:59:29 +08:00
|
|
|
bd2802_restore_state(led);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2013-03-22 10:09:01 +08:00
|
|
|
#endif
|
2009-03-05 03:59:29 +08:00
|
|
|
|
2011-03-23 07:30:14 +08:00
|
|
|
static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
|
|
|
|
|
|
2009-03-05 03:59:29 +08:00
|
|
|
static const struct i2c_device_id bd2802_id[] = {
|
|
|
|
|
{ "BD2802", 0 },
|
|
|
|
|
{ }
|
|
|
|
|
};
|
|
|
|
|
MODULE_DEVICE_TABLE(i2c, bd2802_id);
|
|
|
|
|
|
|
|
|
|
static struct i2c_driver bd2802_i2c_driver = {
|
|
|
|
|
.driver = {
|
|
|
|
|
.name = "BD2802",
|
2013-03-22 10:09:01 +08:00
|
|
|
.pm = &bd2802_pm,
|
2009-03-05 03:59:29 +08:00
|
|
|
},
|
|
|
|
|
.probe = bd2802_probe,
|
2013-02-28 11:55:14 +08:00
|
|
|
.remove = bd2802_remove,
|
2009-03-05 03:59:29 +08:00
|
|
|
.id_table = bd2802_id,
|
|
|
|
|
};
|
|
|
|
|
|
2012-01-11 07:09:27 +08:00
|
|
|
module_i2c_driver(bd2802_i2c_driver);
|
2009-03-05 03:59:29 +08:00
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
|
|
|
|
|
MODULE_DESCRIPTION("BD2802 LED driver");
|
2009-06-11 03:48:50 +08:00
|
|
|
MODULE_LICENSE("GPL v2");
|