344 lines
8.7 KiB
C
344 lines
8.7 KiB
C
|
/*
|
||
|
* Broadcom BCM7xxx internal transceivers support.
|
||
|
*
|
||
|
* Copyright (C) 2014, Broadcom Corporation
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* as published by the Free Software Foundation; either version
|
||
|
* 2 of the License, or (at your option) any later version.
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/phy.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/bitops.h>
|
||
|
#include <linux/brcmphy.h>
|
||
|
|
||
|
/* Broadcom BCM7xxx internal PHY registers */
|
||
|
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
|
||
|
|
||
|
/* 40nm only register definitions */
|
||
|
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
|
||
|
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
|
||
|
#define MII_BCM7XXX_100TX_DISC 0x14
|
||
|
#define MII_BCM7XXX_AUX_MODE 0x1d
|
||
|
#define MII_BCM7XX_64CLK_MDIO BIT(12)
|
||
|
#define MII_BCM7XXX_CORE_BASE1E 0x1e
|
||
|
#define MII_BCM7XXX_TEST 0x1f
|
||
|
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
|
||
|
|
||
|
static int bcm7445_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
const struct bcm7445_regs {
|
||
|
int reg;
|
||
|
u16 value;
|
||
|
} bcm7445_regs_cfg[] = {
|
||
|
/* increases ADC latency by 24ns */
|
||
|
{ MII_BCM54XX_EXP_SEL, 0x0038 },
|
||
|
{ MII_BCM54XX_EXP_DATA, 0xAB95 },
|
||
|
/* increases internal 1V LDO voltage by 5% */
|
||
|
{ MII_BCM54XX_EXP_SEL, 0x2038 },
|
||
|
{ MII_BCM54XX_EXP_DATA, 0xBB22 },
|
||
|
/* reduce RX low pass filter corner frequency */
|
||
|
{ MII_BCM54XX_EXP_SEL, 0x6038 },
|
||
|
{ MII_BCM54XX_EXP_DATA, 0xFFC5 },
|
||
|
/* reduce RX high pass filter corner frequency */
|
||
|
{ MII_BCM54XX_EXP_SEL, 0x003a },
|
||
|
{ MII_BCM54XX_EXP_DATA, 0x2002 },
|
||
|
};
|
||
|
unsigned int i;
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
|
||
|
ret = phy_write(phydev,
|
||
|
bcm7445_regs_cfg[i].reg,
|
||
|
bcm7445_regs_cfg[i].value);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void phy_write_exp(struct phy_device *phydev,
|
||
|
u16 reg, u16 value)
|
||
|
{
|
||
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
|
||
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
||
|
}
|
||
|
|
||
|
static void phy_write_misc(struct phy_device *phydev,
|
||
|
u16 reg, u16 chl, u16 value)
|
||
|
{
|
||
|
int tmp;
|
||
|
|
||
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
|
||
|
|
||
|
tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
|
||
|
tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
|
||
|
phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
|
||
|
|
||
|
tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
|
||
|
phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
|
||
|
|
||
|
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
|
||
|
}
|
||
|
|
||
|
static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
/* write AFE_RXCONFIG_0 */
|
||
|
phy_write_misc(phydev, 0x38, 0x0000, 0xeb19);
|
||
|
|
||
|
/* write AFE_RXCONFIG_1 */
|
||
|
phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f);
|
||
|
|
||
|
/* write AFE_RX_LP_COUNTER */
|
||
|
phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7);
|
||
|
|
||
|
/* write AFE_HPF_TRIM_OTHERS */
|
||
|
phy_write_misc(phydev, 0x3A, 0x0000, 0x000b);
|
||
|
|
||
|
/* write AFTE_TX_CONFIG */
|
||
|
phy_write_misc(phydev, 0x39, 0x0000, 0x0800);
|
||
|
|
||
|
/* Increase VCO range to prevent unlocking problem of PLL at low
|
||
|
* temp
|
||
|
*/
|
||
|
phy_write_misc(phydev, 0x0032, 0x0001, 0x0048);
|
||
|
|
||
|
/* Change Ki to 011 */
|
||
|
phy_write_misc(phydev, 0x0032, 0x0002, 0x021b);
|
||
|
|
||
|
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
|
||
|
* to 111
|
||
|
*/
|
||
|
phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20);
|
||
|
|
||
|
/* Adjust bias current trim by -3 */
|
||
|
phy_write_misc(phydev, 0x000a, 0x0000, 0x690b);
|
||
|
|
||
|
/* Switch to CORE_BASE1E */
|
||
|
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
|
||
|
|
||
|
/* Reset R_CAL/RC_CAL Engine */
|
||
|
phy_write_exp(phydev, 0x00b0, 0x0010);
|
||
|
|
||
|
/* Disable Reset R_CAL/RC_CAL Engine */
|
||
|
phy_write_exp(phydev, 0x00b0, 0x0000);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = bcm7445_config_init(phydev);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return bcm7xxx_28nm_afe_config_init(phydev);
|
||
|
}
|
||
|
|
||
|
static int phy_set_clr_bits(struct phy_device *dev, int location,
|
||
|
int set_mask, int clr_mask)
|
||
|
{
|
||
|
int v, ret;
|
||
|
|
||
|
v = phy_read(dev, location);
|
||
|
if (v < 0)
|
||
|
return v;
|
||
|
|
||
|
v &= ~clr_mask;
|
||
|
v |= set_mask;
|
||
|
|
||
|
ret = phy_write(dev, location, v);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return v;
|
||
|
}
|
||
|
|
||
|
static int bcm7xxx_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
/* Enable 64 clock MDIO */
|
||
|
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
|
||
|
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
|
||
|
|
||
|
/* Workaround only required for 100Mbits/sec */
|
||
|
if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
|
||
|
return 0;
|
||
|
|
||
|
/* set shadow mode 2 */
|
||
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
||
|
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* set iddq_clkbias */
|
||
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
|
||
|
udelay(10);
|
||
|
|
||
|
/* reset iddq_clkbias */
|
||
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
|
||
|
|
||
|
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
|
||
|
|
||
|
/* reset shadow mode 2 */
|
||
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Workaround for putting the PHY in IDDQ mode, required
|
||
|
* for all BCM7XXX PHYs
|
||
|
*/
|
||
|
static int bcm7xxx_suspend(struct phy_device *phydev)
|
||
|
{
|
||
|
int ret;
|
||
|
const struct bcm7xxx_regs {
|
||
|
int reg;
|
||
|
u16 value;
|
||
|
} bcm7xxx_suspend_cfg[] = {
|
||
|
{ MII_BCM7XXX_TEST, 0x008b },
|
||
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
|
||
|
{ MII_BCM7XXX_100TX_DISC, 0x7000 },
|
||
|
{ MII_BCM7XXX_TEST, 0x000f },
|
||
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
|
||
|
{ MII_BCM7XXX_TEST, 0x000b },
|
||
|
};
|
||
|
unsigned int i;
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
|
||
|
ret = phy_write(phydev,
|
||
|
bcm7xxx_suspend_cfg[i].reg,
|
||
|
bcm7xxx_suspend_cfg[i].value);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct phy_driver bcm7xxx_driver[] = {
|
||
|
{
|
||
|
.phy_id = PHY_ID_BCM7366,
|
||
|
.phy_id_mask = 0xfffffff0,
|
||
|
.name = "Broadcom BCM7366",
|
||
|
.features = PHY_GBIT_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_28nm_afe_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_28nm_afe_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
}, {
|
||
|
.phy_id = PHY_ID_BCM7439,
|
||
|
.phy_id_mask = 0xfffffff0,
|
||
|
.name = "Broadcom BCM7439",
|
||
|
.features = PHY_GBIT_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_28nm_afe_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_28nm_afe_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
}, {
|
||
|
.phy_id = PHY_ID_BCM7445,
|
||
|
.phy_id_mask = 0xfffffff0,
|
||
|
.name = "Broadcom BCM7445",
|
||
|
.features = PHY_GBIT_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_28nm_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_28nm_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
}, {
|
||
|
.name = "Broadcom BCM7XXX 28nm",
|
||
|
.phy_id = PHY_ID_BCM7XXX_28,
|
||
|
.phy_id_mask = PHY_BCM_OUI_MASK,
|
||
|
.features = PHY_GBIT_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_28nm_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_28nm_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
}, {
|
||
|
.phy_id = PHY_BCM_OUI_4,
|
||
|
.phy_id_mask = 0xffff0000,
|
||
|
.name = "Broadcom BCM7XXX 40nm",
|
||
|
.features = PHY_GBIT_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
}, {
|
||
|
.phy_id = PHY_BCM_OUI_5,
|
||
|
.phy_id_mask = 0xffffff00,
|
||
|
.name = "Broadcom BCM7XXX 65nm",
|
||
|
.features = PHY_BASIC_FEATURES |
|
||
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
||
|
.flags = PHY_IS_INTERNAL,
|
||
|
.config_init = bcm7xxx_dummy_config_init,
|
||
|
.config_aneg = genphy_config_aneg,
|
||
|
.read_status = genphy_read_status,
|
||
|
.suspend = bcm7xxx_suspend,
|
||
|
.resume = bcm7xxx_config_init,
|
||
|
.driver = { .owner = THIS_MODULE },
|
||
|
} };
|
||
|
|
||
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
||
|
{ PHY_ID_BCM7366, 0xfffffff0, },
|
||
|
{ PHY_ID_BCM7439, 0xfffffff0, },
|
||
|
{ PHY_ID_BCM7445, 0xfffffff0, },
|
||
|
{ PHY_ID_BCM7XXX_28, 0xfffffc00 },
|
||
|
{ PHY_BCM_OUI_4, 0xffff0000 },
|
||
|
{ PHY_BCM_OUI_5, 0xffffff00 },
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
static int __init bcm7xxx_phy_init(void)
|
||
|
{
|
||
|
return phy_drivers_register(bcm7xxx_driver,
|
||
|
ARRAY_SIZE(bcm7xxx_driver));
|
||
|
}
|
||
|
|
||
|
static void __exit bcm7xxx_phy_exit(void)
|
||
|
{
|
||
|
phy_drivers_unregister(bcm7xxx_driver,
|
||
|
ARRAY_SIZE(bcm7xxx_driver));
|
||
|
}
|
||
|
|
||
|
module_init(bcm7xxx_phy_init);
|
||
|
module_exit(bcm7xxx_phy_exit);
|
||
|
|
||
|
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
|
||
|
|
||
|
MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_AUTHOR("Broadcom Corporation");
|